POLYTHENE BAG WITH SELF LOCKING FOR LACES SIZE-4 INCH X 3 INCH OR SIMILAR.

BEST TRADE QUALITY. AS per terms & condition enclosed. NOTE: SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY

SELF SEALING POLYTHENE BAG 480 MM X 440 MM X 0.08 MM THICK

CQA(GS)/US/434(a)EXCEPT SIZES.

RUSTPROOF BRASS EYELET 10MM DIA WITH 6.8 +-0.1MM OVERALL HEIGHT WITH WASHER

IND/TC/3847(A),AS per terms & condition enclosed. NOTE: SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY.

SEALANT TO PREVENT WATER PENETRATION

AS per terms & condition enclosed. NOTE: SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY.

OG.ASSY COMPRISING OF FOLLOWINGS:- (A).RING,LOCK KEYED IRDE-1274/35, (B).CUP IRDE-1274/36, (C).SPACER,OPTICAL ELEMENT IRDE-1274/38, (D).RAY SHADE IRDE-1274/41.

OG.ASSY COMPRISING OF FOLLOWINGS:- (A).RING,LOCK KEYED IRDE-1274/35, (B).CUP IRDE-1274/36, (C).SPACER,OPTICAL ELEMENT IRDE-1274/38, (D).RAY SHADE IRDE-1274/41.

OG.ASSY COMPRISING OF FOLLOWINGS:- (A).RING,LOCK KEYED IRDE-1274/35, (B).CUP IRDE-1274/36, (C).SPACER,OPTICAL ELEMENT IRDE-1274/38, (D).RAY SHADE IRDE-1274/41.

HOUSING OG TO DRG NO. CWC/229/1

HOUSING OG TO DRG NO. CWC/229/1

DRG NO. CWC/229/1

HOUSING OG SAND CASTING TO DRG. NO. ODD/C/818/2

HOUSING OG SAND CASTING TO DRG. NO. ODD/C/818/2

ODD/C/818/2

RETICLE TO CQA(I)-793/51

RETICLE TO CQA(I)-793/51

CQA(I)-793/51

RETICLE TO DRG. NO. GF-235113H

RETICLE TO DRG. NO. GF-235113H

GF-235113H

Housing to casting drg no. 5178463

Housing to casting drg no. 5178463

5178463

Arm to casting Drg No. 155/Comp-5/54 for P-155

Arm to casting Drg No. 155/Comp-5/54 for P-155

155/Comp-5/54

Casting of Arm to Drg No. 155/CAST/004

Casting of Arm to Drg No. 155/CAST/004

155/CAST/004

Catch to casting drg no. 5191789

Catch to casting drg no. 5191789

5191789

IS-14181-2002 PART-I,II & III

IS-14181-2002 PART-I,II & III

Sealing Ring Drg No. 161-461 for Metallic Oturator for IRD Project

Sealing Ring Drg No. 161-461 for Metallic Oturator for IRD Project

161-461

Primer Magazine part No. 1165150

Primer Magazine part No. 1165150

1165150

Obturator Barrel to drg no. 161-460 for metallic obturator for IRD Project

Obturator Barrel to drg no. 161-460 for metallic obturator for IRD Project

161-460

Obturator Support to Drg No. 161-645 for metalic obturator for I.R.D. project

Obturator Support to Drg No. 161-645 for metalic obturator for I.R.D. project

161-645

Arm to casting drg no. 4082388

Investment Casting

4082388

As per drg. (2A26-02-80)

As per drg. (2A26-02-80)

2A26-02-80

As per drg. (2A26-02-81)

As per drg. (2A26-02-81)

2A26-02-81

SPECN.NO:-ADRDE/SPECN/2000/54(b)

SPECN.NO:-ADRDE/SPECN/2000/54(b)

A SET OF 19 COMPONENTS OF HR BINO AS PER DETAIL OF COMPONENTS MENTIONED IN ANNEXURE-"A

A SET OF 19 COMPONENTS OF HR BINO AS PER DETAIL OF COMPONENTS MENTIONED IN ANNEXURE-"A

MCT-2963/1, 2920/1, 2948/1, 2944/1, 2951/1, 2952/1, 2922/1, 2955/1,2956/1, 2927/1, 2957/1,2958/1, 2930/1, 2960/1, 2961/1, 2932/1, 2962/1, 2934/1

PRISM AS PER DRG.NO.MCT-3257/2 WITHOUT SILVERING FOR TNP-165A

PRISM AS PER DRG.NO.MCT-3257/2 WITHOUT SILVERING FOR TNP-165A

MCT-3257/2

RETICLE OPTICAL INSTRUMENT FOR BINO 8X30R DRG. NO. MCT-3278/1

RETICLE OPTICAL INSTRUMENT FOR BINO 8X30R DRG. NO. MCT-3278/1

MCT-3278/1

SET OF LENSES FOR BINO 8X 30 R CONSISTING OF LENS OPTICAL INSTRUMENT MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET.

SET OF LENSES FOR BINO 8X 30 R CONSISTING OF LENS OPTICAL INSTRUMENT MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET.

SET OF LENSES FOR BINO 8X 30 R CONSISTING OF LENS OPTICAL INSTRUMENT MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET.

SET OF FINISHED OPTICS CONSISTING OF PRISM OPTICAL INSTRUMENT MCT-2954/1 AND MCT-2976/1 1/SET EACH

SET OF FINISHED OPTICS CONSISTING OF PRISM OPTICAL INSTRUMENT MCT-2954/1 AND MCT-2976/1 1/SET EACH

MCT-2954/1 AND MCT-2976/1 1/SET EACH

GRATICULE TO CWC-231/3

GRATICULE TO CWC-231/3

CWC-231/3

AIMING DEVICE BL3812065 (LF 7440300979)

AIMING DEVICE BL3812065 (LF 7440300979)

HEAD UNIT BL3906063 (LF 7440300164)

HEAD UNIT BL3906063 (LF 7440300164)

GYRO STABILIZER DRG NO BL2564018 (LF 7440300975)

GYRO STABILIZER DRG NO BL2564018 (LF 7440300975)

COLLIMATOR DRG NO BL2766065 (LF 7440300167)

COLLIMATOR DRG NO BL2766065 (LF 7440300167)

Drg. No. ISX-377 with DC No. 36785-A

Drg. No. ISX-377 with DC No. 36785-A

Carbon tape 19 mm

Carbon tape 19 mm

As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

USED FOR FLOAT

Specification No.: CQAE/5420/1561-2002.& CONNECTED DRGS. DRAWING NO.: IMSA-0153/D(SHEET 1 OF 2),IMSA-0153/C(SHEET 2 OF 2),IMSA-0154/A,0155/D(3DRGS.),IMPD-0929/B,0930/B,0931, 0932/B,0934/C,0935/A,0936/B,0938/A,0939/B,0940/B(10 DRGS) DRG.NO.IM-0649/B,0650/D-(2 DRGS)GPD-0733/A,0734/A,0735/A, 0736/A,0737/B,0738/B,0739/B,0740/B(8 DRGS). DRG-NO.GGA-0086/A,0087/A,0088/A,0089/B(4 DRGS) TOTAL -27 DRGS.

IMSA-0153/D(SHEET 1 OF 2),IMSA-0153/C(SHEET 2 OF 2),IMSA-0154/A,0155/D(3DRGS.),IMPD-0929/B,0930/B,0931, 0932/B,0934/C,0935/A,0936/B,0938/A,0939/B,0940/B(10 DRGS) DRG.NO.IM-0649/B,0650/D-(2 DRGS)GPD-0733/A,0734/A,0735/A, 0736/A,0737/B,0738/B,0739/B,07

METALLIC SLIDE FASTENER HEAVY DUTY 457M LONG OG

SPECH. NO.: IS : 3148

Trade fabrication of flooring TPO OG For TEFS 2M

PROV. No- IND /TC/2118(7207/PK) Note- FOT sample must be got approved before bulk supply.

LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.

LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.

DS CAT NO.1005-000720 (3 SHEETS)

• Optical Manufacturing technology

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
• Chemical & Mechanical Properties as per std. given drawing
• Chemical & Mechanical Properties as per std. given drawing
• Chemical & Mechanical Properties as per std. given drawing

LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.

LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.

DS CAT NO.1005-000720 (3 SHEETS)

• Optical Manufacturing technology

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
• Chemical & Mechanical Properties as per std. given drawing
• Chemical & Mechanical Properties as per std. given drawing
• Chemical & Mechanical Properties as per std. given drawing

STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G)

STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G)

DRG. NO. SKM- 889

ST. BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG. SKM-960* WITH FIRM'S MAT. THE PROFILE & REF HOLES (SHOULDER LOCKING HOLE DIA 13 .39 (+_0.02) & BUSH MOUNTING FRONT HOLE DIA 18.025 (+_0.02) TO BE DONE SIMULT IN BOTH PLATES KEPT TOGETHER ONE ABOVE AND THER & NO. TO MAKE SET DRG. SKM 884*2 & SKM-884/1*3 ENCL

AS PER DRG.

SKM-960*

• AS PER ENCLOSED

• AS PER ENCLOSED

SPECIFICATION :-JSS 8315-6

SPECIFICATION :-JSS 8315-6

SPECIFICATION:IND/ADE/0061

SPECIFICATION:IND/ADE/0061

SPECIFICATION NO. : IS:4228-1979

SPECIFICATION NO. : IS:4228-1979

SPECN.NO. IND/ADE/0069 (c).

SPECN.NO. IND/ADE/0069 (c).

SPECN.NO.: IS : 3255-1979 EXCEPT THAT :- i) In appearance shade finish and in other respect not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. ii) There shall be no presence of starch. iii) Loss of scouring mild method is to be followed in lieu of severe Method and shall not exceed 2%. iv) Sampling plan & criteria for conformity and Packing & Marking :- as per CQAT&C/QAI/TC-8/11(b).

SPECN.NO.: IS : 3255-1979 EXCEPT THAT :- i) In appearance shade finish and in other respect not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. ii) There shall be no presence of starch. iii) Loss of scouring mild method is to be followed in lieu of severe Method and shall not exceed 2%. iv) Sampling plan & criteria for conformity and Packing & Marking :- as per CQAT&C/QAI/TC-8/11(b).

SPECIFICATION NO. : IS : 8156:1994

SPECIFICATION NO. : IS : 8156:1994

SPECIFICATION NO. : IS : 8156:1994

SPECIFICATION NO. : IS : 8156:1994

SPECN NO.AS PER PARTICULARS WIDTH -30MM THICKNESS -2.10 +-0.02MM WEIGHT/M -36.1grm NOs OF ENDS -240 TEXT OF YARNS-38.4X3 WEAVE -BRAIDED

SPECN NO.AS PER PARTICULARS WIDTH -30MM THICKNESS -2.10 +-0.02MM WEIGHT/M -36.1grm NOs OF ENDS -240 TEXT OF YARNS-38.4X3 WEAVE -BRAIDED

SPECIFICATION :-WIDTH -26MM. THICKNESS-0.58+-.01 MM WT./MTR.-6.6 GM NO.OF ENDS-178+1 INTERLOCKING PICKS/CM-26 TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N

SPECIFICATION :-WIDTH -26MM. THICKNESS-0.58+-.01 MM WT./MTR.-6.6 GM NO.OF ENDS-178+1 INTERLOCKING PICKS/CM-26 TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N

SPECIFICATION:- WDTH-20MM ,THICKNESS-1.92+.02MM -.01MM WEGHT/MTR.-20.5 GM (MAX.) NO. OF ENDS-132,TEX OF YARN-38.5X3 BS. -5680N , WEAVE-BRAIDED

SPECIFICATION:- WDTH-20MM ,THICKNESS-1.92+.02MM -.01MM WEGHT/MTR.-20.5 GM (MAX.) NO. OF ENDS-132,TEX OF YARN-38.5X3 BS. -5680N , WEAVE-BRAIDED

SPECIFICATION:-WIDTH-30MM THICKNESS-0.40+ - 0.02MM WEIGHT/MTR-5.3GM (MAX.) NO.OF ENDS-87 PICKS/CM -16 TEX OF YARNS -WARP- 17.8X2 WEFT- 17.8X2 BREAKING STRENGTH-340 N (MIN.)

SPECIFICATION:-WIDTH-30MM THICKNESS-0.40+ - 0.02MM WEIGHT/MTR-5.3GM (MAX.) NO.OF ENDS-87 PICKS/CM -16 TEX OF YARNS -WARP- 17.8X2 WEFT- 17.8X2 BREAKING STRENGTH-340 N (MIN.)

SPECIFICATION NO.: BS=17650 N (1800 KG MIN.) WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM WT. PER MTR.IN GRM 40 MAX.

SPECIFICATION NO.: BS=17650 N (1800 KG MIN.) WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM WT. PER MTR.IN GRM 40 MAX.

SPECN. NO.IS:4228- 1968.

SPECN. NO.IS:4228- 1968.

SPECN NO.:-IS:4228-1968

SPECN NO.:-IS:4228-1968

SPECN. NO.ADDE/SPECN/1992/38.

SPECN. NO.ADDE/SPECN/1992/38.

SPECN-NO:-IS:8156-1981.

SPECN-NO:-IS:8156-1981.

SPECN NO.IS:8156-1981

SPECN NO.IS:8156-1981

SPECN.NO.IS:8156-1981

SPECN.NO.IS:8156-1981

SPECIFICATION :- WIDTH---------------------13 MM +/-1 WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX. B.S. IN NEWTON------------1800-N MIN. THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2 TEX OF YARN---WARP----52, WEFT------23.9. NO.OF ENDS----------------72. PICKS/CM------------------14. WEAVE---------------------2/2 POINTED TWILL WEAVE.

SPECIFICATION :- WIDTH---------------------13 MM +/-1 WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX. B.S. IN NEWTON------------1800-N MIN. THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2 TEX OF YARN---WARP----52, WEFT------23.9. NO.OF ENDS----------------72. PICKS/CM------------------14. WEAVE---------------------2/2 POINTED TWILL WEAVE.

SPECIFICATION :- WIDTH-------------------------13.5 MM +/-1 WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX) B.S.IN NEWTON-----------------3200-N (MIN) THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX) TEX OF YARN----WARP--110 (FACE + BACK),WEFT--120.60 AND BINDER--25.30 NO.OF ENDS--------63 (FACE + BACK)+ 7 BINDER PICKS/CM----------12/13 (BOTH LAYER) WEAVE-------------DOUBLE PLAIN.

SPECIFICATION :- WIDTH-------------------------13.5 MM +/-1 WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX) B.S.IN NEWTON-----------------3200-N (MIN) THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX) TEX OF YARN----WARP--110 (FACE + BACK),WEFT--120.60 AND BINDER--25.30 NO.OF ENDS--------63 (FACE + BACK)+ 7 BINDER PICKS/CM----------12/13 (BOTH LAYER) WEAVE-------------DOUBLE PLAIN.

SPCN. NO. ADRDE/SPECN/1981/6

SPCN. NO. ADRDE/SPECN/1981/6

SPECIFICATION NO. : IS : 8156-1981

SPECIFICATION NO. : IS : 8156-1981

SPECIFICATION NO. : IS : 8156-1981

SPECIFICATION NO. : IS : 8156-1981

SPECIFICATION IS : 8156 OF 1981.

SPECIFICATION IS : 8156 OF 1981.

SPECIFICATION IS : 8156 - 1981.

SPECIFICATION IS : 8156 - 1981.

SPCN.NO. IS:4228-1967.

SPCN.NO. IS:4228-1967.

SPCN.NO.IND/ADE/0072.

SPCN.NO.IND/ADE/0072.

SPECN.NO.IS:4228-1968.

SPECN.NO.IS:4228-1968.

SPECCCN. NO. ADDE/BP/1 (b) ROLL LENGTH 100 MTR. EXCLUDING SAMPLING

SPECCCN. NO. ADDE/BP/1 (b) ROLL LENGTH 100 MTR. EXCLUDING SAMPLING

AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a) WIDTH - 25.4 MM, THICKNESS - 2.35 MM (MAX) MASS/METER - 36.5 GM (MAX.) NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE) PICKS/CM - 10 INCLUDING BOTH LAYERS B.S. - 1850 KG (MIN.) WEAVE - TUBULAR PLAIN

AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a) WIDTH - 25.4 MM, THICKNESS - 2.35 MM (MAX) MASS/METER - 36.5 GM (MAX.) NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE) PICKS/CM - 10 INCLUDING BOTH LAYERS B.S. - 1850 KG (MIN.) WEAVE - TUBULAR PLAIN

SPECN.NO:-ADRDE/QAC/TECH.PART/07/01(b).

SPECN.NO:-ADRDE/QAC/TECH.PART/07/01(b).

SPECN-IS:8156-1981

SPECN-IS:8156-1981

SPECN.NO:-ADRDE/SPECN/2000/54(b)

SPECN.NO:-ADRDE/SPECN/2000/54(b)

SPECN-NO:-ADRDE/SPECN/1992/38

SPECN-NO:-ADRDE/SPECN/1992/38

SPCEN.AS PER IS: 4228-1979.

SPCEN.AS PER IS: 4228-1979.

SPECN-ADDE/BP/3(c)

SPECN-ADDE/BP/3(c)

SPECN. NO. JSS:8315-6.

SPECN. NO. JSS:8315-6.

SPECIFICATION NO.:- ADDE/BP/1(b)

SPECIFICATION NO.:- ADDE/BP/1(b)

Except that in apperance finish and all other respects not defined in this specn., the material shall conform to the sealed pattern held in the custody of controller CQAT&C Kanpur.There shall be no presence of starch. Scouring loss Mild method is to be followed in lieu of severe method and shall not exceed 2% picks/cm (-1) tolerance to be permittd. In addition the firm shall get their name or trade mark woven/stamped alongwith seldvedges at a interval of one meter on either side of the tape.(2)Sampling plan and criteria of conformtty:as per QAI NO.CQAT&C/TC-8/11(b).(3)Packing Marking:As per relevant clause of specn.

Except that in apperance finish and all other respects not defined in this specn., the material shall conform to the sealed pattern held in the custody of controller CQAT&C Kanpur.There shall be no presence of starch. Scouring loss Mild method is to be followed in lieu of severe method and shall not exceed 2% picks/cm (-1) tolerance to be permittd. In addition the firm shall get their name or trade mark woven/stamped alongwith seldvedges at a interval of one meter on either side of the tape.(2)Sampling plan and criteria of conformtty:as per QAI NO.CQAT&C/TC-8/11(b).(3)Packing Marking:As per relevant clause of specn.