REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II).
Specification
REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II).
TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A.
Specification
TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A.
BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993 (DC-26469-SA).(COMPLETE ASSY.). FOR RIFLE 5.56MM INSAS.
Specification
BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993 (DC-26469-SA).(COMPLETE ASSY.). FOR RIFLE 5.56MM INSAS.
Drawing no.
TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993 (DC-26469-SA).(COMPLETE ASSY.).
BLANK FOR BARREL EXTENSION(UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*6-S. FOR RIFLE 5.56MM.INSAS. (MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE)
Specification
BLANK FOR BARREL EXTENSION(UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*6-S. FOR RIFLE 5.56MM.INSAS. (MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE)
F/COMPT EJECTOR SMALL ARMS CARTRIDGE DRG.NO.2689/1,SHT-5 TODS CAT NO.1005-007905(DC-26518-SA)THROUGH MIM ROUTE FOR RIFLE 5.56MM INSAS.MACRO ETCH TEST TO CONFORM ASTM381-84STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE 2.NMIR TEST AS PER IS4163-82WITH ACCEPT.STD.3FOR THIN SERIES & 1FOR THICK SERIES OF A,B,C,D
Specification
F/COMPT EJECTOR SMALL ARMS CARTRIDGE DRG.NO.2689/1,SHT-5 TODS CAT NO.1005-007905(DC-26518-SA)THROUGH MIM ROUTE FOR RIFLE 5.56MM INSAS.MACRO ETCH TEST TO CONFORM ASTM381-84STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE 2.NMIR TEST AS PER IS4163-82WITH ACCEPT.STD.3FOR THIN SERIES & 1FOR THICK SERIES OF A,B,C,D
FLASH ABSORBER (WITHOUT PHOSPHATING)TO RFI.SK.-7770-S{DS CATNO.1005-007739(DC-24638-SA)}.NMIR TEST ASPER IS:4163-82 WITHACCEPTANCE STD.BETTER THAN 3(THIN)& 1(THICK)FOR A,B,C,D &MACRO ETCH TEST ASPER ASTME-381-84 WITH ACCPT.LIMIT C2 R2 S2FOR PLT.1&NILFOR PLT.2.TP TO BE CONFORM 250 TO300HV AFTER HT
Specification
FLASH ABSORBER (WITHOUT PHOSPHATING)TO RFI.SK.-7770-S{DS CATNO.1005-007739(DC-24638-SA)}.NMIR TEST ASPER IS:4163-82 WITHACCEPTANCE STD.BETTER THAN 3(THIN)& 1(THICK)FOR A,B,C,D &MACRO ETCH TEST ASPER ASTME-381-84 WITH ACCPT.LIMIT C2 R2 S2FOR PLT.1&NILFOR PLT.2.TP TO BE CONFORM 250 TO300HV AFTER HT
EXTRACTOR SMALL ARMS CARTRIDGE TO D.S. CAT NO.1005-007756 (DC-26658-SA DT.01/08/12 (THROUGH MIM ROUTE)MACRO ETCH TEST TO CONFORM ASTME 381-84 STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE2.NMIR TEST AS PER IS:4163-82WITH ACCEPTANCE STD.3 FOR THIN & 1 FOR THICK SERIES OF A,B,C,D. FOR RIFLE 5.56MM.INSAS.
Specification
EXTRACTOR SMALL ARMS CARTRIDGE TO D.S. CAT NO.1005-007756 (DC-26658-SA DT.01/08/12 (THROUGH MIM ROUTE)MACRO ETCH TEST TO CONFORM ASTME 381-84 STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE2.NMIR TEST AS PER IS:4163-82WITH ACCEPTANCE STD.3 FOR THIN & 1 FOR THICK SERIES OF A,B,C,D. FOR RIFLE 5.56MM.INSAS.
TUBE LOWER TO DRG.NO.ARDE SK 2975/11. FOR RIFLE 5.56MM INSAS FOLDABLE BUTT(STEEL).[AL.ALLOY TO IS:738-243451'W'(HT15-OLD DESIG)WITH PROTECTIVE FINISH ANODISED TO COLOUR BLACK].
Specification
TUBE LOWER TO DRG.NO.ARDE SK 2975/11. FOR RIFLE 5.56MM INSAS FOLDABLE BUTT(STEEL).[AL.ALLOY TO IS:738-243451'W'(HT15-OLD DESIG)WITH PROTECTIVE FINISH ANODISED TO COLOUR BLACK].
THINNER IN 20 LITER M.S. DRUM GEN PURPOSE FOR SYNTH. PAINT AND VARNISHES TO SPECN. IS-14314-1995 (SUITABLE FOR MIXING WITH READY MIXED PAINT TO IS 168/1993 AIR DRYING (MATT FINISH) SHA-DE O.G. TO ISC 220 OF 15.5.94 A APPLICABLE FOR DEF. USE
Specification
THINNER IN 20 LITER M.S. DRUM GEN PURPOSE FOR SYNTH. PAINT AND VARNISHES TO SPECN. IS-14314-1995 (SUITABLE FOR MIXING WITH READY MIXED PAINT TO IS 168/1993 AIR DRYING (MATT FINISH) SHA-DE O.G. TO ISC 220 OF 15.5.94 A APPLICABLE FOR DEF. USE
HEAD BREECH BOLT (SP-18)UPTO OPERATION STAGE-XIV AS PER RFI SK.7848(WITHOUT HARDENING,CR.FLASHING & R/DIE OPERATION)WITH FIRM'S MATERIAL. FOR .315"SPORTING RIFLE.
Specification
HEAD BREECH BOLT (SP-18)UPTO OPERATION STAGE-XIV AS PER RFI SK.7848(WITHOUT HARDENING,CR.FLASHING & R/DIE OPERATION)WITH FIRM'S MATERIAL. FOR .315"SPORTING RIFLE.
LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3 OF CQA (SA) NOTE SHEET NO. 1 FOR PISTOL AUTO 9MM 1A.
Specification
LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3 OF CQA (SA) NOTE SHEET NO. 1 FOR PISTOL AUTO 9MM 1A.
HAMMER,MK-2 TO DS CAT NO.1005-003160(LT.DC-26820-SA ) MACRO-ETCH TEST TO ASTME-381:1984 AS PER COL.'C' OF CQA(SA) NOTE SHEET NO.1 & NMIR TEST AS PER COL.'C'AGAINST SL.NO.3 OFCQA(SA) NOTE SHEET NO.1
Specification
HAMMER,MK-2 TO DS CAT NO.1005-003160(LT.DC-26820-SA ) MACRO-ETCH TEST TO ASTME-381:1984 AS PER COL.'C' OF CQA(SA) NOTE SHEET NO.1 & NMIR TEST AS PER COL.'C'AGAINST SL.NO.3 OFCQA(SA) NOTE SHEET NO.1
Drawing no.
DS CAT NO.1005-003160(LT.DC-26820-SA)
Manufacturing Technology
Testing / Inspection Facility
70
0
Number
31046
OFDFYS/EFA/DAVP/01/2018/AVR/2018/01-2
Engine Factory Avadi
Chennai
Chennai
Chennai
Chennai, Tamil Nadu
600054
SLIDE TO DS.CAT. NO. 1005-003210(LT.DC-26822-SA DT.22-4-16) [MACRO ETCH TEST,DETERMINATION OF INCLUSION CONTENT AND SAM-PLING PLAIN REFER TO CQA(SA) NOTE SHEET NO.1 OF LATEST ISSUEAGAINST COLUMN "NATURE" C.] FOR PISTOL AUTO 9MM 1A.
Specification
SLIDE TO DS.CAT. NO. 1005-003210(LT.DC-26822-SA DT.22-4-16) [MACRO ETCH TEST,DETERMINATION OF INCLUSION CONTENT AND SAM-PLING PLAIN REFER TO CQA(SA) NOTE SHEET NO.1 OF LATEST ISSUEAGAINST COLUMN "NATURE" C.] FOR PISTOL AUTO 9MM 1A.
