31921
PV/OCFC/LDPE/2017/1
Ordnance Cable Factory Chandigarh
The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002
Name
Code
Quantity
Approx Value
Select
LOW DENSITY POLYTHENE NATURAL AS PER SPECIFICATION
Description
LOW DENSITY POLYTHENE [L.D.P.E.] NATURAL AS PER JSS 6145-26:2014&MSCQ-1R
Specification
LOW DENSITY POLYTHENE [L.D.P.E.] NATURAL AS PER JSS 6145-26:2014&MSCQ-1R
Manufacturing Technology
AS PER ATTACHEMENT AS PER ATTACHEMENT AS PER ATTACHEMENT AS PER ATTACHEMENT AS PER ATTACHEMENT
Testing / Inspection Facility
AS PER ATTACHEMENT AS PER ATTACHEMENT AS PER ATTACHEMENT AS PER ATTACHEMENT
70
81287
Kilogram
31922
MPV06
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
Name
Code
Quantity
Approx Value
Select
FORGING FOR LEVER/ HANDLE
Description
FORGING FOR LEVER/ HANDLE
Specification
FORGING FOR LEVER
Testing / Inspection Facility
90
250
Number
SILENCER/ MUFFLER FOR MPV
Description
SILENCER/ MUFFLER FOR MPV PART NO. X3967400
Specification
SILENCER/ MUFFLER FOR MPV PART NO. X3967400
Drawing no.
115-01-0006-1(A)
Testing / Inspection Facility
90
250
Number
31923
RFI/ADV./REG/03/2017
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
BRACKET REAR SIGHT FOR 30-06 SPORTING RIFLE.
Description
BRACKET REAR SIGHT FOR 30-06 SPORTING RIFLE, DRG. NO. TSP-302
Specification
BS:970 PT.1 GR 070 M55 OR En-9
Drawing no.
DRG. NO. TSP-302
Testing / Inspection Facility
70
1125
Number
SEAT BASE ASSEMBLY
Description
SEAT BASE ASSEMBLY (DRIVER & CO-DRIVER) FOR MPV DRG. NO. 110-31-0011-1
Specification
SEAT BASE ASSEMBLY (DRIVER & CO-DRIVER) FOR MPV DRG. NO. 110-31-0011-1
Drawing no.
110-31-0011-1
Testing / Inspection Facility
90
500
Set
GLASS FRAME (SIDE GLASS)
Description
GLASS FRAME (SIDE GLASS) DRG. NO. 640-10-1024-1 PART NO. 640-10-1024-1
Specification
GLASS FRAME (SIDE GLASS) DRG. NO. 640-10-1024-1 PART NO. 640-10-1024-1
Drawing no.
640-10-1024-1
Testing / Inspection Facility
90
1000
Number
BRACKET REAR SIGHT FOR 0.22
Description
BRACKET REAR SIGHT FOR 0.22" SPORTING RIFLE, DRG. NO. SPR-024*2
Specification
STEEL BS 970 En19A
Drawing no.
DRG. NO. SPR-024*2
Testing / Inspection Facility
70
750
Number
SEAT BASE ASSY (FRONT RHS)
Description
SEAT BASE ASSY (FRONT RHS) DRG. NO. 640-08-1080-1/C
Specification
SEAT BASE ASSY (FRONT RHS) DRG. NO. 640-08-1080-1/C
Drawing no.
640-08-1080-1/C
Testing / Inspection Facility
90
250
Number
SEAT BASE ASSY (REAR LHS)
Description
SEAT BASE ASSY (REAR LHS) DRG. NO. 645-08-1050-1
Specification
SEAT BASE ASSY (REAR LHS) DRG. NO. 645-08-1050-1
Drawing no.
645-08-1050-1
Testing / Inspection Facility
90
250
Number
SEAT BASE ASSY (FRONT LHS)
Description
SEAT BASE ASSY (FRONT LHS) DRG. NO. 640-08-1070-1/C
Specification
SEAT BASE ASSY (FRONT LHS) DRG. NO. 640-08-1070-1/C
Drawing no.
640-08-1070-1/C
Testing / Inspection Facility
90
250
Number
31924
110170103 (re)
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
TAPE NYLON 66 43 MM BS 9000 N UD
Description
TAPE NYLON 66,43 MM.B.S. 9000 N U/D
Specification
ADRDE/SPECN/1985/27(b)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101797010
8042
Metre
GUARD ASSY (FRONT LIGHT MTG)
Description
GUARD ASSY (FRONT LIGHT MTG) DRG. NO. 610-06-2012-1/B
Specification
GUARD ASSY (FRONT LIGHT MTG) DRG. NO. 610-06-2012-1/B
Drawing no.
610-06-2012-1/B
Testing / Inspection Facility
90
500
Number
31925
110170102 (re)
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
TAPE NYLON 66, 26mm TUBULAR BS 1850 KG
Description
TAPE NYLON 66, 26mm TUBULAR BS 1850 KG
ADRDE/SPECN/2000/54(c)
Specification
ADRDE/SPECN/2000/54(c)
Testing / Inspection Facility
2101797011
8042
Metre
GLASS FRAME (CO-DRIVER SIDE GLASS)
Description
GLASS FRAME (CO-DRIVER SIDE GLASS) PART NO. 640-10-1023-1 DRG. NO. 640-10-1023-1
Specification
GLASS FRAME (CO-DRIVER SIDE GLASS) PART NO. 640-10-1023-1 DRG. NO. 640-10-1023-1
Drawing no.
640-10-1023-1
Testing / Inspection Facility
90
250
Number
SPRING MAIN FOR 9MM AUTO PISTOL 1A.
Description
SPRING MAIN FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003186
Specification
BS: 970 Pt.3 : 1991 Gr. 817 IN 'C D; LTA, CONDOTION
TEST OIECE TO BE TESTED IN CONDITION 'W' OF BS:970 PART 3:1991
Drawing no.
DRG. NO. DS CAT NO-1005-003186
Testing / Inspection Facility
70
17800
Number
STOCK SIDE RIGHT FOR 9MM AUTO PISTOL 1A.
Description
STOCK SIDE RIGHT FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003177
Specification
MOULDING POWDER, MOULDING PLASTICS (PHENOLIC) TO SPECN. NO. JSS 1097 GRD. 'Z' WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa, OR NYLON 66 GP COLOUR BLACK TO SPECN DEF/STAN 93-8/1 WITHOUT GLASS FIBRE FINISH OF END PRODUCT OF STOCK SIDE RIGHT SHALL BE COLOUR BLACK (MATT. FINISH)
Drawing no.
DRG. NO. DS CAT NO-1005-003177
Testing / Inspection Facility
70
17800
Number
STOCK SIDE LEFT FOR 9MM AUTO PISTOL 1A.
Description
STOCK SIDE LEFT FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003176
Specification
MOULDING POWDER, MOULDINGPLASTICS (PHENOLIC)
TO SPECCN NO. JSS 1097 GRD. "Z" WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa/ or nylon 66 gp colour black to specn deef/ stan 93-8/1 without glass fibre. finish of end product of stock side left shall be colour black (matt. finish)
Drawing no.
DRG. NO. DS CAT NO-1005-003176
Testing / Inspection Facility
70
17800
Number
MAGAZINE ASSY. FOR 9MM AUTO PISTOL 1A.
Description
MAGAZINE ASSY. FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003190, 1005-003191, 1005-003192
Specification
AS PER DRAWING
Drawing no.
DRG. NO. DS CAT NO-1005-003190, 1005-003191, 1005-003192
Testing / Inspection Facility
70
17800
Number
GUIDE SPRING MAIN ASSY FOR 9MM AUTO PISTOL 1A.
Description
GUIDE SPRING MAIN ASSY FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-5360-007390
Specification
CROMIUM ALLOY STEEL BALL TO SPECN. IS:2898-1976
H.T./HARDNESS
Drawing no.
DRG. NO. DS CAT NO-5360-007390
Testing / Inspection Facility
70
17800
Number
SLING SUB ASSY. FOR 12 BORE PUMP ACTION GUN.
Description
SLING SUB ASSY. FOR 12 BORE PUMP ACTION GUN, DRG. NO. DS CAT NO-1005-007815, 1005-007994, 1005-007995
Specification
AS PER DRAWING
Drawing no.
DRG. NO. DS CAT NO-1005-007815, 1005-007994, 1005-007995
Testing / Inspection Facility
70
1125
Number
SEAR FOR 9MM AUTO PISTOL 1A.
Description
SEAR FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003172
Specification
IS:3748 : 1990 DESIGNATION 75 T-6
Drawing no.
DRG. NO. DS CAT NO-1005-003172
Testing / Inspection Facility
70
17800
Number
CATCH MAGAZINE FINISH FOR 9MM AUTO PISTOL 1A.
Description
CATCH MAGAZINE FINISH FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003148
Specification
BS:970 M40
IS:3748-1990 DESIGNATION 75. T-6
Drawing no.
DRG. NO. DS CAT NO-1005-003148
Testing / Inspection Facility
70
17800
Number
PLATE LOCKING FOR PISTOL AUTO 9MM 1A.
Description
PLATE LOCKING FOR PISTOL AUTO 9MM 1A, DRG. NO. DS CAT NO-1005-003205
Specification
BS:970 PAET 3:1991 GRADE 708 M40
CONDITION 'R' IS:5517-1993
DESIGNATION 42 Cr Mo 2
Drawing no.
DRG. NO. DS CAT NO-1005-003205
Testing / Inspection Facility
70
17800
Number
LOOP LANYARD ASSY. FOR 9MM AUTO PISTOL 1A.
Description
LOOP LANYARD ASSY. FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003166, 1005-003167, 1005-003168
Specification
STEEL BS:5216-75 CODE NS OR HS Gr 1 OR 2 OR BS5216-75 CODE ND OR HD Gr 2 or IS:4454 PT.I-1975 Gr 1 & 2
Drawing no.
DRG. NO. DS CAT NO-1005-003166, 1005-003167, 1005-003168
Testing / Inspection Facility
70
17800
Number
ARM SEAR CONNECTING FOR 9MM AUTO PISTOL 1A.
Description
ARM SEAR CONNECTINGT FOR 9MM AUTO PISTOL 1A, DRG. NO.- DS CAT NO 1005-003196
Specification
IS:2507 : 1975 GRADE 6, DESIG. 80 C6
Drawing no.
DRG. NO.- DS CAT NO 1005-003196
Testing / Inspection Facility
70
17800
Number
SLIDE FOR 9MM AUTO PISTOL 1A.
Description
SLIDE FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003210
Specification
IS:5517-1993 DESIGNATION 42 Cr 4 Mo 2 LRS190mm
Drawing no.
DRG. NO. DS CAT NO-1005-003210
Testing / Inspection Facility
70
17800
Number
LOWER BLOCK BARREL FOR TEAR GAS GUN.
Description
LOWER BLOCK BARREL FOR TEAR GAS GUN, DRG. NO. TGG-103
Specification
BS:970 : PART 1 : 1983 070 M55 (EN-9)
ALTERNATE MATL. BS:970 : PART 1:1983 708 M40 (EN-19A)
Drawing no.
DRG. NO. TGG-103
Testing / Inspection Facility
70
4050
Number
UPPER BLOCK BARREL FOR TEAR GAS GUN.
Description
UPPER BLOCK BARREL FOR TEAR GAS GUN, DRG. NO. TGG-102
Specification
BS:970 : PART 1 : 1983 070 M55 (EN-9)
ALTERNATE MAT : BS:970 : PART 1 : 1983 708 M40 (EN-19A)
Drawing no.
DRG. NO. TGG-102
Testing / Inspection Facility
70
4050
Number
BOLT BREECH FOR 0.22 SPORTING RIFLE.
Description
BOLT BREECH FOR 0.22" SPORTING RIFLE. DRG. NO. SPR-013
Specification
BS. 970 EN 19A (T)
Drawing no.
DRG. NO. SPR-013
Testing / Inspection Facility
70
750
Number
BODY FOR 0.22 SPRTING RIFLE.
Description
BODY FOR 0.22" SPRTING RIFLE, DRG. NO. SPR-012*4
Specification
BS 970 EN 19A (T-CONDITION) WITH NON METALLIC INCLUSION RATING TEST
Drawing no.
DRG. NO. SPR-012*4
Testing / Inspection Facility
70
750
Number
BLOCK EJECTOR FOR 0.22 SPORTING RIFLE.
Description
BLOCK EJECTOR FOR 0.22" SPORTING RIFLE, DRG. NO. SPR-032*2
Specification
BS:970 EN 19A (T)
PHOSPHETED TO SPECN JSS:0465-01 CLASS II OIL FINISH
Drawing no.
DRG. NO. SPR-032*2
Testing / Inspection Facility
70
750
Number
SLIDE FOR 0.32 PISTOL.
Description
SLIDE FOR 0.32" PISTOL,DRG. NO. RFI/SK. 9920
Specification
STEEL BS:970 PT .1. 1994 GRADE 070 M55 (EN-9)
TREATMENT:-BEFORE MACHINING 220 TO 260 HV
Drawing no.
DRG. NO. RFI/SK. 9920
Testing / Inspection Facility
70
7500
Number
MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG
Description
MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG
Specification
MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG
Testing / Inspection Facility
70
9700
Number
COCKING PIECE FOR 12 BORE PUMP ACTION GUN
Description
COCKING PIECE FOR 12 BORE PUMP ACTION GUN, DRG. NO:- PAG-0037
Specification
BS:970 Pt. 1-83 70 M40 'W'CONDITION'
HARDNESS:-311-375 BHN
Drawing no.
DRG. NO:- PAG-0037
Testing / Inspection Facility
70
9700
Number
BREECH BLOCK SLIDE FOR 12 BORE PUMP ACTION GUN.
Description
BREECH BLOCK SLIDE FOR 12 BORE PUMP ACTION GUN, DRG. NO. PAG0065
Specification
IS:4368-1967 Gd-13. Ni3 Cr80
CASE HARDNESS:-500-550 VPN
CASE DEPTH:-0.6 TO 1mm
Drawing no.
DRG. NO. PAG0065
Testing / Inspection Facility
70
9700
Number
SLIDE REAR SIGHT FOR 30-06 SPORTING RIFLE,
Description
SLIDE REAR SIGHT FOR 30-06 SPORTING RIFLE, DRG. NO. TSP-314
Specification
BS:970 PT.1 GR 070 M55 OR En-9
TRATMENT:- HRD. & GRD. TO 300-350 H.V.
Drawing no.
DRG. NO. TSP-314
Testing / Inspection Facility
70
1125
Number
MACHINED BODY FOR 7.62MM ASSAULT RIFLE.
Description
MACHINED BODY FOR 7.62MM ASSAULT RIFLE, DRG. NO. RFI SK. NO. 9846
Specification
BS:970 PT 1:1983 817 M40(T) BS:970 PT EN 24(T)
Drawing no.
DRG. NO. RFI SK. NO. 9846
Testing / Inspection Facility
70
300
Number
MACHINED BODY FOR RIFLE 5.56MM ASSAULT RIFLE/EX-CALIBUR.
Description
MACHINED BODY FOR RIFLE 5.56MM ASSAULT RIFLE/EX-CALIBUR, DRG. NO. RF/SK. 9730
Specification
BS 970 Pt. 1-1983, 817 M-40 T (BS:970 En24 T)
Drawing no.
DRG. NO. RF/SK 970
Testing / Inspection Facility
70
500
Number
31926
110170101 (re)
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
WEBBING NYLON 51 MM UNDYED BS=480 KGS.
Description
WEBBING NYLON 51 MM UNDYED BS=480 KGS.
Specification
SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.
Testing / Inspection Facility
2101877051
32109
Metre
GLASS FRAME (DRIVER SIDE GLASS)
Description
GLASS FRAME (DRIVER SIDE GLASS) DRG. NO. 640-10-1022-1/A PART NO- 640-10-1022-1/A
Specification
GLASS FRAME (DRIVER SIDE GLASS) DRG. NO. 640-10-1022-1/A PART NO- 640-10-1022-1/A
Drawing no.
640-10-1022-1/A
Testing / Inspection Facility
90
250
Number
GLASS FRAME (WIND SHIELD GLASS)
Description
GLASS FRAME (WIND SHIELD GLASS) DRG. NO. 640-10-1021-1 PART NO. 640-10-1021-1
Specification
GLASS FRAME (WIND SHIELD GLASS) DRG. NO. 640-10-1021-1 PART NO. 640-10-1021-1
Drawing no.
640-10-1021-1
Testing / Inspection Facility
90
500
Number
SPRING HANGER BRACKET (FRONT - REAR SUSPENSION)
Description
SPRING HANGER BRACKET (FRONT - REAR SUSPENSION) DRG NO.620-02-1280-1/C
Specification
SPRING HANGER BRACKET (FRONT - REAR SUSPENSION) DRG NO.620-02-1280-1/C
Drawing no.
620-02-1280-1/C
Testing / Inspection Facility
90
500
Number
SPRING HANGER BRACKET (FRONT - FT - SUSPENSION)
Description
SPRING HANGER BRACKET (FRONT - FT - SUSPENSION), DRG NO.620-02-1270-1/D
Specification
SPRING HANGER BRACKET (FRONT - FT - SUSPENSION), DRG NO.620-02-1270-1/D
Drawing no.
620-02-1270-1/D
Testing / Inspection Facility
90
500
Number
FRP. DASH BOARD (ARMY VERSION)
Description
FRP. DASH BOARD (ARMY VERSION) DRG. NO. 645-01-3321-1/A
Specification
FRP. DASH BOARD (ARMY VERSION) DRG. NO. 645-01-3321-1/A
Drawing no.
645-01-3321-1/A
Testing / Inspection Facility
90
250
Number
EXHAUST PIPE FOR MPV (ARMY)
Description
EXHAUST PIPE FOR MPV (ARMY) DRG. NO. - 115-01-0006-1(A)
Specification
EXHAUST PIPE FOR MPV (ARMY) DRG. NO. - 115-01-0006-1(A)
Drawing no.
115-01-0006-1(A)
Testing / Inspection Facility
90
250
Set
REAR GLASS (ARMY) MPV
Description
REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I)
Specification
REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I)
Drawing no.
645-10-1015(I)
Testing / Inspection Facility
90
500
Number
CO-DRIVER SIDE GLASS
Description
CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I)
Specification
CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I)
Drawing no.
645-10-1013-(I)
Testing / Inspection Facility
90
250
Number
DRIVER SIDE GLASS
Description
DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I)
Specification
DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I)
Drawing no.
645-10-1012-(I)
Testing / Inspection Facility
90
250
Number
LEVER CONTROL HAND/TORSION BAR
Description
LEVER CONTROL HAND/TORSION BAR
Specification
LEVER CONTROL HAND
Testing / Inspection Facility
90
250
Number
UPHOLSTRY CLOTH (FOR MPV)
Description
UPHOLSTRY CLOTH NON WOVEN STRUCTURE RIBBED P.P. CARPET (WEIGHT 850 GM/SQ MTRS THICKNESS MIN 4.3 MM, WIDTH 1.83 MTRS +-5%, COLOR- MOSS/ROYAL GREY)
Specification
UPHOLSTRY CLOTH NON WOVEN STRUCTURE RIBBED P.P. CARPET (WEIGHT 850 GM/SQ MTRS THICKNESS MIN 4.3 MM, WIDTH 1.83 MTRS +-5%, COLOR- MOSS/ROYAL GREY)
Testing / Inspection Facility
90
4000
Metre
TROCELLEN WITH DENSITY OF 25 KGS CU MT 10MM THICK
Description
TROCELLEN WITH DENSITY OF 25 KGS/CU.MT (10MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 24/03/2007
Specification
TROCELLEN WITH DENSITY OF 25 KGS/CU.MT (10MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 24/03/2007
Testing / Inspection Facility
90
2250
Sq.metre
31927
110170167 (re)
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
PULLY
Description
SPECN. NO. ADRDE/1159-A-2/SA-6
Specification
SPECN. NO. ADRDE/1159-A-2/SA-6
Testing / Inspection Facility
2101069001
193
Number
31928
110170143 (re)
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
PACK OPENING SPRING ELASTIC 89 MM
Description
PACK OPENING SPRING ELASTIC 89 MM
Specification
ADRDE/781(d)EXCEPT FOR LENGTH
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110065004
34
Number
PACK OPENING SPRING ELASTIC 203 MM
Description
PACK OPENING SPRING ELASTIC 203 MM
Specification
ADRDE/781(d)EXCEPT FOR LENGTH
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110065003
262
Number
31929
110170104 (re)
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
RIP CORD LARGE
Description
RIP CORD LARGE ADRDE/115(f)
Specification
PROV DRAWING NO.ADRDE/115(f).
Testing / Inspection Facility
2110027005
750
Number
Fan
Description
FAN 24V, DC, 150MM MINI CAR FAN (OSC) OR 24V, DC, COACH FAN TYPE CF-200 WITH BRACKET AS PER DRG NO. MPV/ELECT/116/MAKE-REMI/ TOCOS/ MESKO/ WINNER
Specification
FAN 24V, DC, 150MM MINI CAR FAN (OSC) OR 24V, DC, COACH FAN TYPE CF-200 WITH BRACKET AS PER DRG NO. MPV/ELECT/116/MAKE-REMI/ TOCOS/ MESKO/ WINNER
Drawing no.
DRG NO. MPV/ELECT/116/MAKE-REMI/ TOCOS/ MESKO/ WINNER
Testing / Inspection Facility
90
1000
Number
SEAT BACK REST
Description
SEAT BACK REST DRG. NO. OFPM 640-08-1302/D
Specification
SEAT BACK REST DRG. NO. OFPM 640-08-1302/D
Drawing no.
OFPM 640-08-1302/D
Testing / Inspection Facility
90
3000
Number
TROOPER SEAT
Description
TROOPER SEAT DRG. NO. OFPM 640-08-1301/B
Specification
TROOPER SEAT DRG. NO. OFPM 640-08-1301/B
Drawing no.
OFPM 640-08-1301/B
Testing / Inspection Facility
90
1000
Number
DRAG LINK 40 x 40
Description
DRAG LINK 40 x 40 DRG. NO. MPV/ARMY/MOD/043/B
Specification
DRAG LINK 40 x 40 DRG. NO. MPV/ARMY/MOD/043/B
Drawing no.
MPV/ARMY/MOD/043/B
Testing / Inspection Facility
90
250
Set
31930
RFI/OTE/ATG0120295/2017
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
KNIFE KOOKRIE FOR RIFLE 5.56MM INSAS.
Description
KNIFE KOOKRIE FOR RIFLE 5.56MM INSAS,DRG. NO. DS CAT NO-1095-000079
Specification
BLADE-IS:3748-1980 GR 55
CROSSPIECE-BS:1449 PT.1 : 1983 GR-6 S-4
ALTERNATE MATERIAL:-BS5710 PT.:2:1981 GR70 0R IS: 3748:1990 GR 70 T6 HARDNESS:-400-450HV
Drawing no.
DRG. NO. DS CAT NO-1095-000079
Testing / Inspection Facility
70
6550
Number
SAFETY BELT (FOR MPV)
Description
SAFETY BELT DRG. NO. OFPM 600 – 10 – 1014/G
Specification
SAFETY BELT DRG. NO. OFPM 600 – 10 – 1014/G
Drawing no.
OFPM 600 – 10 – 1014/G
Testing / Inspection Facility
90
3000
Number
Heavy Duty Cables
Description
HEAVY DUTY CABLES DRG. NO. OFPM 640-06-2050-1/E
Specification
HEAVY DUTY CABLES DRG. NO. OFPM 640-06-2050-1/E
Drawing no.
OFPM 640-06-2050-1/E
Testing / Inspection Facility
90
250
Number
DRAIN PIPE
Description
DRAIN PIPE DRG NO. 640-3-1157/A
Specification
DRAIN PIPE DRG NO. 640-3-1157/A
Testing / Inspection Facility
90
250
Number
FUEL SYSTEM HOSE PIPE ASSY (VI)
Description
FUEL SYSTEM HOSE PIPE ASSY (VI) DRG NO. OFPM 640-01-2608
Specification
FUEL SYSTEM HOSE PIPE ASSY (VI) DRG NO. OFPM 640-01-2608
Drawing no.
OFPM 640-01-2608
Testing / Inspection Facility
90
250
Number
HOSE PIPE (FEED PUMP TO SINGLE FILTER INLET)/ FOR MPV
Description
HOSE PIPE (FEED PUMP TO SINGLE FILTER INLET) DRG NO. OFPM 640-01-2602/D
Specification
HOSE PIPE (FEED PUMP TO SINGLE FILTER INLET) DRG NO. OFPM 640-01-2602/D
Drawing no.
OFPM 640-01-2602/D
Testing / Inspection Facility
90
500
Number
COVER ASSY. LHS (A.C. SYSTEM)
Description
COVER ASSY. LHS (A.C. SYSTEM) DRG. NO. 620-01-6020-1/B
Specification
COVER ASSY. LHS (A.C. SYSTEM) DRG. NO. 620-01-6020-1/B
Drawing no.
620-01-6020-1/B
Testing / Inspection Facility
90
250
Number
COVER ASSY. RHS (A.C. SYSTEM)
Description
COVER ASSY. RHS (A.C. SYSTEM) DRG. NO. 620-01-6010-1/B
Specification
COVER ASSY. RHS (A.C. SYSTEM) DRG. NO. 620-01-6010-1/B
Drawing no.
620-01-6010-1/B
Testing / Inspection Facility
90
250
Number
31931
O022-17
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
MACHINING OF BODY QUARDRANT FIRE CONTROL
Description
MACHINING OF BODY QUARDRANT FIRE CONTROL MCT-2287/2QF
Specification
MACHINING OF BODY QUARDRANT FIRE CONTROL MCT-2287/2QF
Testing / Inspection Facility
74
225
Number
U BOLT FRONT
Description
U BOLT FRONT DRG. NO. F-3578415V3 PT. NO. F3579715 V3
Specification
U BOLT FRONT DRG. NO. F-3578415V3 PT. NO. F3579715 V3
Testing / Inspection Facility
90
1000
Number
SIDE GLASS
Description
SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I)
Specification
SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I)
Drawing no.
645-10-1014-(I)
Testing / Inspection Facility
90
1000
Number
WIND SHIELD GLASS (ARMY) MPV
Description
WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING)
Specification
WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING)
Drawing no.
645-10-1011-(I)
Testing / Inspection Facility
90
500
Number
Rubber Items for MPV
Description
RUBBER ITEMS FOR MPV AS PER DRG. NO. MPV/HULL/093/A CONSISTING OF 1. MUD RUBBER - 4 NO/SET, 2. TROOPER COMPARTMENT - 1 NO/SET, 3. FUEL TANK UPPER - 1 NO/SET, 4. FUEL TANK LOWER - 1 NO/SET, 5. CO-DRIVER SIDE - 1 NO/SET, 6. DRIVER SIDE & A.B.C - 1 NO/SET
Specification
RUBBER ITEMS FOR MPV AS PER DRG. NO. MPV/HULL/093/A CONSISTING OF 1. MUD RUBBER - 4 NO/SET, 2. TROOPER COMPARTMENT - 1 NO/SET, 3. FUEL TANK UPPER - 1 NO/SET, 4. FUEL TANK LOWER - 1 NO/SET, 5. CO-DRIVER SIDE - 1 NO/SET, 6. DRIVER SIDE & A.B.C - 1 NO/SET
Drawing no.
MPV/HULL/093/A
Testing / Inspection Facility
90
250
Set
SPLIT TYPE AIR CONDITIONING SYSTEM FOR MPV
Description
SPLIT TYPE AIR CONDITIONING SYSTEM FOR MPV (ARMY & MHA VERSION) AS PER SPECIFICATION NO. VFJ/TSS/SP/ARMY & MHA/04 AMENDMENT NO. 7 DATED. 05-11-2014
Specification
SPLIT TYPE AIR CONDITIONING SYSTEM FOR MPV (ARMY & MHA VERSION) AS PER SPECIFICATION NO. VFJ/TSS/SP/ARMY & MHA/04 AMENDMENT NO. 7 DATED. 05-11-2014
Testing / Inspection Facility
90
250
Set
TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM FOR MPV
Description
TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM AS PER SPECIFICATION NO. VFJ/SP/TSS/RFS/01/MPV (ARMY & MHA)/ AMENDMENT NO. 10 DATED 10-07-2015
Specification
TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM AS PER SPECIFICATION NO. VFJ/SP/TSS/RFS/01/MPV (ARMY & MHA)/ AMENDMENT NO. 10 DATED 10-07-2015
Testing / Inspection Facility
90
1500
Set
31932
RFI/OTE/ATH0120022/2017
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
WHEEL LOCK FOR RIFLE 5.56MM IMNSAS.
Description
WHEEL LOCK FOR RIFLE 5.56MM IMNSAS, DRG. NO. DS CAT NO-1005-560045
Specification
STEEL BS:970 PT-1:1983 Gr070 M55 (En-9)
Drawing no.
DRG. NO. DS CAT NO-1005-560045
Testing / Inspection Facility
70
22098
Number
TROCELLEN WITH DENSITY OF 33 KGS CU MT 40 MM THICK
Description
TROCELLEN WITH DENSITY OF 33 KGS/CU.MT (40 MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 1 DTD. 24/03/2007
Specification
TROCELLEN WITH DENSITY OF 33 KGS/CU.MT (40 MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 1 DTD. 24/03/2007
Testing / Inspection Facility
90
4000
Sq.metre
LEAF SPRING ASSY.
Description
LEAF SPRING ASSY. (ARMY VERSION) DRG NO. OFPM 640-02-1500/A
Specification
LEAF SPRING ASSY. (ARMY VERSION) DRG NO. OFPM 640-02-1500/A
Drawing no.
DRG NO. OFPM 640-02-1500/A
Testing / Inspection Facility
90
1000
Number
PROPELLER SHAFT FOR MPV
Description
PROPELLER SHAFT ONE SET CONSISTING OF - 1. PROPELLER SHAFT (GB & AGB) -01 NO. DRG NO. 640-02-1350/A 2. PROPELLER SHAFT (FA & AGB) - 01 NOS, DRG NO. 640-02-1360/A. 3. PROPELLER SHAFT (RA & AGB) 01 NO., DRG NO. 640-02-1370/A
Specification
PROPELLER SHAFT ONE SET CONSISTING OF - 1. PROPELLER SHAFT (GB & AGB) -01 NO. DRG NO. 640-02-1350/A 2. PROPELLER SHAFT (FA & AGB) - 01 NOS, DRG NO. 640-02-1360/A. 3. PROPELLER SHAFT (RA & AGB) 01 NO., DRG NO. 640-02-1370/A
Drawing no.
DRG NO. 640-02-1350/A; DRG NO. 640-02-1360/A.; DRG NO. 640-02-1370/A
Testing / Inspection Facility
90
250
Set
31933
OLF/MM-2/T-1706011436/2017
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
PLUG RS50TV (LF 7441120224)
Description
AS PER SPECIFICATION
Specification
PLUG RS50TV AS PER SPEC. NO. AV0.364.047 TU
Testing / Inspection Facility
74
210
Number
PLUG RS32TV (LF NO. 7441120223)
Description
AS PER SPECIFICATION
Specification
PLUG RS32TVAS PER SPEC. NO. AV0.364.047 TU
Testing / Inspection Facility
74
210
Number