Modified first aid box

Modified first aid box

115-31-0125/A

Strap for fire extinguisher size= 350mmX30mmX2mm

Strap for fire extinguisher size= 350mmX30mmX2mm

FELT 2 mm THICK AS PER SIZES CONSIST OF (I) 615 x 125 mm = 6 Nos, (II) 930 X 125 mm =2 Nos (III) 20mm X 10 METRES = 1Nos

FELT 2 mm THICK AS PER SIZES CONSIST OF (I) 615 x 125 mm = 6 Nos, (II) 930 X 125 mm =2 Nos (III) 20mm X 10 mtrs = 1Nos

Steering bolt

Steering bolt

AHSP/TSS/MPV/001

Air piping modular hose consisting of 06 pipes

Air piping modular hose consisting of 06 pipes

AHSP/TSS/MP/002

Cover for fog lamp

Cover for fog lamp

AHSP/TSS/MPV/003

INDICATOR LAMP FOR FLANGE HEATER 24V DC, 2 WATT

INDICATOR LAMP FOR FLANGE HEATER 24V DC, 2 WATT

AXIAL DC BRUSHLESS MOTOR FAN 24 VOLT, 0.2 AMPERE, ALUMINIUM DIE-CAST HOUSING WITH BODY SIZE 120X120X30mm WITH SET OF 04 CHEASE HEAD SCREW OF M4X0.4X50

AXIAL DC BRUSHLESS MOTOR FAN 24 VOLT, 0.2 AMPERE, ALUMINIUM DIE-CAST HOUSING WITH BODY SIZE 120X120X30mm WITH SET OF 04 CHEASE HEAD SCREW OF M4X0.4X50

set of strap consist of 33 types with brass tip end & with brass buckle end of different size for ammunition armaments holding system for MPV ARMY as per Annexure I & Annexure II

Annexure -I & Annexure II

UNION BULK HEAD DRG NO. 620-05-2001-1/A

UNION BULK HEAD DRG NO. 620-05-2001-1/A

620-05-2001-1/A

HOSE PIPE ASSY IV & V - FUEL SYSTEM (FOR MPV) DRG. NO. OFPM 640-01-2607/B

HOSE PIPE ASSY IV & V - FUEL SYSTEM (FOR MPV) DRG. NO. OFPM 640-01-2607/B

OFPM 640-01-2607/B

HOSE PIPE ASSY III - FUEL SYSTEM (FOR MPV) DRG NO. OFPM 640-01-2604/A

HOSE PIPE ASSY III - FUEL SYSTEM (FOR MPV) DRG NO. OFPM 640-01-2604/A

OFPM 640-01-2604/A

FUSE BOX 12 WAY, NAKE-KKK, PART NO K-770, WITH FUSE 24V, 20A, MAKE-KKK, PT. NO. K-777

FUSE BOX 12 WAY, NAKE-KKK, PART NO K-770, WITH FUSE 24V, 20A, MAKE-KKK, PT. NO. K-777

SET OF 15 HARNESSESS FOR MINE PROTECTED VEHICLE (ARMY VERSION) (AS PER ENCLOSURE)

SET OF 15 HARNESSESS FOR MINE PROTECTED VEHICLE (ARMY VERSION) (AS PER ENCLOSURE)

Y- FRAME FOR TOWING PART NO. D 75 022 13

Y- FRAME FOR TOWING PART NO. D 75 022 13

CASTING FOR COMMANDER RING DRG. NO. 645-01-7303-1/C FOR MINE PROTECTED VEHICLE

CASTING FOR COMMANDER RING

645-01-7303-1/C

CASTING FOR LOWER RACE RING DRG. NO. 645-01-7313-1/C/B FOR MINE PROTECTED VEHICLE

CASTING FOR LOWER RACE RING

645-01-7313-1/C/B

CASTING FOR BLANK UPPER RACE RING DRG. NO. 645-01-7311-2/B FOR MINE PROTECTED VEHICLE

CASTING FOR BLANK UPPER RACE RING

645-01-7311-2/B

HINGES FOR REAR DOOR & BONNET ASSY. OF MPV 6 SET/VEH DRG. NO.HULL/MPV/112/B

HINGES FOR REAR DOOR & BONNET ASSY. OF MPV 6 SET/VEH DRG. NO.HULL/MPV/112/B

HULL/MPV/112/B

"U" BOLT REAR DRG. NO. F-3578415-V3 PT. NO. F3581915-V3

"U" BOLT REAR DRG. NO. F-3578415-V3 PT. NO. F3581915-V3

F-3578415-V3

POWER STEERING SYSTEM FOR MPV

POWER STEERING SYSTEM FOR MPV

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

SAND HIGH SILICA AS PER IS: 1987-1974 GRADE-A, GRAIN FINENESS GRADE 425/212, PRODUCED BY CRUSHING QUARTZITE SAND STONES OF OPEN TEXTURE, IN BAG OF 50 KG PACKING.

SAND HIGH SILICA AS PER IS: 1987-1974 GRADE-A, GRAIN FINENESS GRADE 425/212, PRODUCED BY CRUSHING QUARTZITE SAND STONES OF OPEN TEXTURE, IN BAG OF 50 KG PACKING.

TEAR TAPE NYLON 44 MM,10000 N(TEARING STRENGTH=340-640 N)

ADRDE/SPECN/1980/4(b)

ADRDE/SPECN/1980/4(b)

• As Per Specification/Drawing

• As Per Specification/Drawing

As per OFC Drg. NO. SK-9367/A

As per OFC Drg. NO. SK-9367/A

SK-9367/A

IS:8156 (Latest)

IS:8156 (Latest)

AL.BRONZE PIPE EXTRUSION/PRESS WORK (SIZE OD 75MM X 35 MM ID ) IN THE RUNNING LENGTH 200MM & ABOVE MATERIAL 10-3-1.5 TO SPEC GOST 1208-73 ( REF GOST 18 175-78)

AL.BRONZE PIPE EXTRUSION/PRESS WORK (SIZE OD 75MM X 35 MM ID ) IN THE RUNNING LENGTH 200MM & ABOVE MATERIAL 10-3-1.5 TO SPEC GOST 1208-73 ( REF GOST 18 175-78)

SPRING TO DRG.NO.765-55-132-1

SPRING TO DRG.NO.765-55-132-1

PIPE (TABLE DRAWING) TO DRG.NO 765-38-CD175 IN BENT CONDITION (SUPPLIER TO OBTAIN SAMPLE FROM MPF BEFORE MANUFACTURE AND SUPPLY).

PIPE (TABLE DRAWING) TO DRG.NO 765-38-CD175 IN BENT CONDITION (SUPPLIER TO OBTAIN SAMPLE FROM MPF BEFORE MANUFACTURE AND SUPPLY).

765-38-CD175

CASTING FOR IMPELLER TO DRG.NO 54-83-005-1A-2

CASTING FOR IMPELLER TO DRG.NO 54-83-005-1A-2

PIPE TO DRG.NO.765-38-SB 141. 765-38-83,765-38-84,765-38-155

PIPE TO DRG.NO.765-38-SB 141. 765-38-83,765-38-84,765-38-155

765-38-SB 141. 765-38-83,765-38-84,765-38-155

TITANIUM ALLOY ROD DIA -45 AS PER IS:11902-86 GR-G (LF : 9927094845)

TITANIUM ALLOY ROD DIA -45 AS PER IS:11902-86 GR-G (LF : 9927094845)

STEEL SHEET TOOL ALLOY 16.0 MM THICK TO SPCN IS: 3749 T-110 W6CR4 (LF : 9927094680)

STEEL SHEET TOOL ALLOY 16.0 MM THICK TO SPCN IS: 3749 T-110 W6CR4 (LF : 9927094680)

STEEL TUBE TO SPCN IS:3601:84 GR CDS-240, OUTER DIA 70 MM X WALL THICKNESS 10 MM (LF : 9927093904)

STEEL TUBE TO SPCN IS:3601:84 GR CDS-240, OUTER DIA 70 MM X WALL THICKNESS 10 MM (LF : 9927093904)

STL TUBE OUTER DIA 40 MM X 9 MM WALL THICKNESS IS : 3601-84 GRCDS-240 COND "NORMALISED" IN RUNNING LENGTH OF 2 TO 3 MTRS. (LF : 9927093899)

STL TUBE OUTER DIA 40 MM X 9 MM WALL THICKNESS IS : 3601-84 GRCDS-240 COND "NORMALISED" IN RUNNING LENGTH OF 2 TO 3 MTRS. (LF : 9927093899)

TITANIUM UNALLOY ROD, 55MM DIA OST-1-90013-80 GRADE VTI OR IS:11902, GRADE "B" IN RUNNING LENGTH OF 2 MTRS (LF : 9927087413)

TITANIUM UNALLOY ROD, 55MM DIA OST-1-90013-80 GRADE VTI OR IS:11902, GRADE "B" IN RUNNING LENGTH OF 2 MTRS (LF : 9927087413)

STEEL STAINLESS WIRE 1.6MM AS PER SPCN IS:6603-01 GR. X 04CR18NI10TI IN THE STANDARD RUNNING LENGTH (LF : 9927085605)

STEEL STAINLESS WIRE 1.6MM AS PER SPCN IS:6603-01 GR. X 04CR18NI10TI IN THE STANDARD RUNNING LENGTH (LF : 9927085605)

BRASS ROUND BAR 80MM DIA +/- 0.2, TO SPCN. IS:319, TYPE-I, 1/2H IN RUNNING LENGTH OF 1.5 TO 3.0 MTRS. (LF:9927076939)

BRASS ROUND BAR 80MM DIA +/- 0.2, TO SPCN. IS:319, TYPE-I, 1/2H IN RUNNING LENGTH OF 1.5 TO 3.0 MTRS. (LF:9927076939)

BRASS ROUND BAR 105 MM DIA TO SPCN. IS:319 TYPE-I 1/2 (HARD) IN RUNNING LENGTH OF 1 TO 1.5 MTRS (LF : 9927074231)

BRASS ROUND BAR 105 MM DIA TO SPCN. IS:319 TYPE-I 1/2 (HARD) IN RUNNING LENGTH OF 1 TO 1.5 MTRS (LF : 9927074231)

SILICON BRONZE GR. CS-101, SIZE 0.5T X 200 X 1000 MM BS 2870:80 (LF: 9927074196)

SILICON BRONZE GR. CS-101, SIZE 0.5T X 200 X 1000 MM BS 2870:80 (LF: 9927074196)

STAINLESS STEEL SHEET 1.4 MM THICK X 700 MM WIDTH TO SPCN IS:6911 : 1992 GR. X 04CR19NI9 IN THE STANDARD RUNNING LENGTH (LF: 9927073672)

STAINLESS STEEL SHEET 1.4 MM THICK X 700 MM WIDTH TO SPCN IS:6911 : 1992 GR. X 04CR19NI9 IN THE STANDARD RUNNING LENGTH (LF: 9927073672)

STEEL LOW CARBON FREE CUTTING ROUND STEEL BRIGHT BAR 10.0 MM TO SPCN IS:7283-92 GR. 10C8S10 OF IS:4431-78 (LF:9927073604)

STEEL LOW CARBON FREE CUTTING ROUND STEEL BRIGHT BAR 10.0 MM TO SPCN IS:7283-92 GR. 10C8S10 OF IS:4431-78 (LF:9927073604)

STEEL BRIGHT BAR DIA 3.0 MM TO SPCN IS:7283-92, GR10C8S10 OF IS:4431-78 (LF: 99227073600)

STEEL BRIGHT BAR DIA 3.0 MM TO SPCN IS:7283-92, GR10C8S10 OF IS:4431-78 (LF: 99227073600)

SPRING STEEL SHEET SIZE 0.50MM THICK TO SPCN IS:2507, 80C6 IN RUNNING LENGTH 1 TO 2 MTR. X 0.500 WIDE

SPRING STEEL SHEET SIZE 0.50MM THICK TO SPCN IS:2507, 80C6 IN RUNNING LENGTH 1 TO 2 MTR. X 0.500 WIDE

AL. ALLOY SHEET SIZE 0.8MM THICK TO SPCN IS:737, GR. 24345, INWP CONDITION X 500 MM W X 2500 MM LONG (LF:9927073485)

AL. ALLOY SHEET SIZE 0.8MM THICK TO SPCN IS:737, GR. 24345, INWP CONDITION X 500 MM W X 2500 MM LONG (LF:9927073485)

TOOL STL. SHT. AS PER IS:3748:90, GR. 80T3, 12MM TH. X 500MM WIDE X 2 MTRS. AND ABOVE (LF:0202002012)

TOOL STL. SHT. AS PER IS:3748:90, GR. 80T3, 12MM TH. X 500MM WIDE X 2 MTRS. AND ABOVE (LF:0202002012)

MEDIUM CARBON STEEL SHEET 25MM THICK X 250MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8, (LF:0143022026)

MEDIUM CARBON STEEL SHEET 25MM THICK X 250MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8, (LF:0143022026)

MEDIUM CARBON STEEL SHEET SIZE 20MM THICK X 300 MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8 (LF:0143022020)

MEDIUM CARBON STEEL SHEET SIZE 20MM THICK X 300 MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8 (LF:0143022020)

STEEL SHT. GR. 'DD' IS513:94 SIZE 1MM THICK X 300 X 1000 MM (LF: 0133023010)

STEEL SHT. GR. 'DD' IS513:94 SIZE 1MM THICK X 300 X 1000 MM (LF: 0133023010)

STEEL ROD DIA 15MM GR. 14C14S14 TO IS 4431:78 (LF-0131002016)

STEEL ROD DIA 15MM GR. 14C14S14 TO IS 4431:78 (LF-0131002016)

HAMMER FOR 12 BORE PAG, DRG.NO. PAG-0060A THROUGH MIM ROUTE

HAMMER FOR 12 BORE PAG, DRG.NO. PAG-0060A THROUGH MIM ROUTE

DRG.NO. PAG-0060A

TRIGGER FOR 12 BORE PAG, DRG.NO. PAG-0033 THROUGH MIM ROUTE

TRIGGER FOR 12 BORE PAG, DRG.NO. PAG-0033 THROUGH MIM ROUTE

DRG.NO. PAG-0033

BREECH SLIDE LOCKFOR 12 BORE PAG, DRG. NO. PAG-0027 THROUGH MIM ROUTE

BREECH SLIDE LOCKFOR 12 BORE PAG, DRG. NO. PAG-0027 THROUGH MIM ROUTE

DRG. NO. PAG-0027

BREECH BLOCK SLIDE FOR 12 BORE PAG, DRG.NO. PAG-0065B THROUGH MIM ROUTE

BREECH BLOCK SLIDE FOR 12 BORE PAG, DRG.NO. PAG-0065B THROUGH MIM ROUTE

DRG.NO. PAG-0065B

MAGAZINE CAP FOR 12 BORE PAG, DRG.NO. PAG-0018 THROUGH MIM ROUTE

MAGAZINE CAP FOR 12 BORE PAG, DRG.NO. PAG-0018 THROUGH MIM ROUTE

DRG.NO. PAG-0018

TRIGGERING PIN CATCH FOR 12 BORE PAG, DRG.NO. PAG-0038 THROUGH MIM ROUTE

TRIGGERING PIN CATCH FOR 12 BORE PAG, DRG.NO. PAG-0038 THROUGH MIM ROUTE

DRG.NO. PAG-0038

STEEL ROD 15MM DIA HR, ANNEALED COND. TO SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED. IN STRAIGST LENGTH. FOR PIN FIRING OF TGG.

SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED.

STEEL ROD 8MM DIA, HR, ANNEALED COND. TO SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED.IN STRAIGHT LENGTH, FOR PIN FIRING OF PAG & 0.32" PISTOL.

BS:970, PT1 1983 GD. 835 M-30 (EN-30B)

STEEL ROD 6 MM DIA CD., 2M OR 2.5M STRAIGHT IN LENGTH TO BS: 970, PT-I,1983 GD.835, M-30(EN-30B). VACCUM DEGASSED. FOR PIN FIRING OF 7.62 MM RIFLE GHATAK.

BS: 970, PT-I,1983 GD.835, M-30(EN-30B). VACCUM DEGASSED.

STEEL ROUND 4 -0.1MM DIA. HR, ANNEALED COND. TO SPCN.BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED, IN STRAIGHT LENGTH 2 TO 3 M LONG.

SPCN.BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED,

PROV. SPECN.NO. DMSRDE/T&GS/2005/NBC/02(a)

PROV. SPECN.NO. DMSRDE/T&GS/2005/NBC/02(a)

Impact Protector Left to Drg No F1303-026871 for 84mm RL Mk-III

AS PER DRAWING

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Arm to Casting Drg. No. D-4082388

As per Drg. No. D-4082388

D-4082388

Holder to investment casting to Drg . No. D-4082393/1

As per Drg . No. D-4082393/1

D-4082393/1

DUCK NYLON 230 GM STEEL GREY 91.4 CM WIDTH

SPECN.NO.ADRDE/SPECN./1984/23(d)

• As per Specification/Drawing

• As per Specification/Drawing

THREAD SEWING NYLON LIGHT OG VARIETY NO. L- 2. 3 STAND OG (BL-35N(MIN)) SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

IND/ENG/PROV/0732(a)

IND/ENG/PROV/0732(a)

IND/ENG/PROV/1221/a

IND/ENG/PROV/1221/a

SPEEDOMETER ELECTRIC TYPE SP 106 CONSISTING OF SPEEDOMETER INDICATOR & SPEEDOMETER SENDING UNIT DRG No: 700-76-K-418

SPEEDOMETER ELECTRIC TYPE SP 106 CONSISTING OF SPEEDOMETER INDICATOR & SPEEDOMETER SENDING UNIT DRG No: 700-76-K-418

700-76-K-418

FAN 773-82-CB106

FAN 773-82-CB106

773-82-CB106

SUPPLY OF BLOCK EJECTOR ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.

AS PER ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.

ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

K 7040 STAR

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL

AS PER DRG NO K 4110 WITH FIRM'S MATERIAL

K 4110

CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315)

CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315)

MASK AK-630 ASSY. 103

MASK AK-630 ASSY. 103

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006

STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006

Casting for Cover of Suction Pump to Drg. No. 172 46 007 1 2

Casting for Cover of Suction Pump to Drg. No. 172 46 007 1 2

Drg. No. 172 46 007 1 2

DEVELOPMENT, MANUFACTURE, SUPPLY AND PROVING OF THE 29 SUB ASSEMBLIES OF HYDRAULIC SYSTEM FOR 155 MM GUN

DEVELOPMENT, MANUFACTURE, SUPPLY AND PROVING OF THE 29 SUB ASSEMBLIES OF HYDRAULIC SYSTEM FOR 155 MM GUN

POWER UNIT (FEED UNIT) AK-630 ASSY.107

POWER UNIT (FEED UNIT) AK-630 ASSY.107

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Slide to Casting Drg No. D-6385161

Slide to Casting Drg No. D-6385161

D-6385161