32881
OFBH/2017/SECOND/0001
Ordnance Factory Bhusawal
The General Manager,
Bhusawal
Bhusawal
Maharashtra
425203
Name
Code
Quantity
Approx Value
Select
CAPCELL WITH ADHENSIVE 80 x 15 x 18
Description
ACAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 80 X 15 X 18 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL
Specification
CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 80 X 15 X 18 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL
Testing / Inspection Facility
99
80000
Number
PAINTS READY MIXED AIR DRYING SPRAYING, MATT FINISH OLIVE GREEN
Description
ISC-220 OF IS -5-1994
Specification
PAINT R/M,A/D,SPRAYING,MATT FINISH,OLIVE GREEN ISC-220 OF IS-5-1994 (FOURTH REVISION) AMENDMENT NO.1 TO SPECIFICATION IS-168-1993 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE. ADDITION CLAUSE IN THE SPECIFICATION:A)DRYING TIME 1.SURFACE E DRY - NOT MORE THAN 01 HOUR 2.HARD DRY - NOT MORE THAN 03-F.O.R. OFBH,BHUSAWAL
Testing / Inspection Facility
10
137500
Litre
RUSTODINE 62-170 JSS-80-5-1993
Description
RUST REMOVING SOLUTION, CONFORMING TO SPECIFICATIONS : JSS-8030-5-1993,DS CAT NO.8030-000015 WITH THE CONDITION CONCENTRATION OF BATH : 25%, TEMPERATURE : 60-75 DEG C, IMMERSION TIME : 15-20 MINUTES, SPECIFIC GRAVITY : 1.40-1.45 NOTE:- 1) TO BE SUPPLIED IN 20 LIT. BLACK CONTAINERS.-F.O.R. OFBH,BHUSAWAL
Specification
RUST REMOVING SOLUTION, CONFORMING TO SPECIFICATIONS : JSS-8030-5-1993,DS CAT NO.8030-000015 WITH THE CONDITION CONCENTRATION OF BATH : 25%, TEMPERATURE : 60-75 DEG C, IMMERSION TIME : 15-20 MINUTES, SPECIFIC GRAVITY : 1.40-1.45 NOTE:- 1) TO BE SUPPLIED IN 20 LIT. BLACK CONTAINERS.-F.O.R. OFBH,BHUSAWAL
Testing / Inspection Facility
10
14062
Litre
PHOSDINE-62-40(AZ)
Description
IZINC PHOSPHATING COMPOUND, CONFORMING TO SPECIFICATIONS : JSS-0465-01-94 CLASS-II, FREE FROM PRECIPITATION, SPECIFIC GRAVITY:- 1.55-1.57, POINTAGE RANGE:- 30-35 (IN 100 LITRES OF WATER WITH 2.5 LITRES OF ZINC PHOSPHATING COMPOUND AND 2 LITRES OF STARTER, BATH TEMP:- 70-85 DEGREE C, IMMERSION-F.O.R. OFBH,BHUSAWAL
Specification
ZINC PHOSPHATING COMPOUND, CONFORMING TO SPECIFICATIONS : JSS-0465-01-94 CLASS-II, FREE FROM PRECIPITATION, SPECIFIC GRAVITY:- 1.55-1.57, POINTAGE RANGE:- 30-35 (IN 100 LITRES OF WATER WITH 2.5 LITRES OF ZINC PHOSPHATING COMPOUND AND 2 LITRES OF STARTER, BATH TEMP:- 70-85 DEGREE C, IMMERSION-F.O.R. OFBH,BHUSAWAL
Testing / Inspection Facility
10
30000
Litre
Handle with Handle Clip for Box C-53A
Description
AS PER O.F. BHUSAWAL DRAWING/SPECIFICATION
Specification
AS PER O.F. BHUSAWAL DRAWING/SPECIFICATION
Testing / Inspection Facility
99
215000
Number
BRACKET A-2 FOR BOX C-53A
Description
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Drawing no.
OFBH DRG NO. OFB/C/1484
Testing / Inspection Facility
99
64125
Number
BRACKET B-1 FOR BOX C-53A
Description
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Testing / Inspection Facility
99
72500
Number
Bracket B-2 for Box C-53 A
Description
As per O.F.Bhusawal Drawing/Specification
Specification
As per O.F.Bhusawal Drawing/Specification
Testing / Inspection Facility
99
43750
Number
BRACKET END FOR SHELL FOR BOX C-53A
Description
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
Testing / Inspection Facility
99
56250
Number
BOTTOM SUPPORT PIECE FOR BOX C-53A
Description
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
Drawing no.
OFBH DRG NO. OFB/C/1480
Testing / Inspection Facility
99
92187
Number
BRACKET CARTRIDGE FRONT FOR BOX C-53A
Description
AS PER DRG./SPECIFICATION
Specification
AS PER DRG./SPECIFICATION
Testing / Inspection Facility
99
32750
Number
HINGE - AS PER DRG. NO. OFB/C/1565
Description
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Testing / Inspection Facility
99
350000
Number
BRACKET A-1 FOR BOX C-53A
Description
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Testing / Inspection Facility
99
43750
Number
LID CORNER PIECE FOR BOX C-53A
Description
AS PER DRG./SPECIFICATION
Specification
AS PER DRG./SPECIFICATION
Drawing no.
OFBH DRG NO. OFB/C/1481
Testing / Inspection Facility
99
165000
Number
BOTTOM CORNER PIECE FOR BOX C-53
Description
AS PER O.F.BHUSAWAL DRAWING
Specification
AS PER O.F.BHUSAWAL DRAWING
Drawing no.
ISV 2043 OFBH DRG NO. OFB/C/1479
Testing / Inspection Facility
99
156250
Number
HANDLE
Description
AS PER O.F.BSL DRAWING/SPECIFICATION
Specification
AS PER O.F.BSL DRAWING/SPECIFICATION
Drawing no.
OFBH DRG NO. OFB/C/1757
Testing / Inspection Facility
99
137800
Number
BRACKET CARTRIDGE REAR FOR BOX C53
Description
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
Testing / Inspection Facility
99
38125
Number
HANDLE AND HANDLE CLIP ASSEMBLY
Description
DRG, NO.OFB/C/1564
Specification
DRG, NO.OFB/C/1564
Drawing no.
DRG, NO.OFB/C/1564
Testing / Inspection Facility
99
74500
Number
Hinge
Description
Drg.No. OFB/C/1410-A
Specification
Drg.No. OFB/C/1410-A
Drawing no.
Drg.No. OFB/C/1410-A
Testing / Inspection Facility
99
144650
Number
CATCH
Description
AS PER O.F. BHUSAWAL DRAWING/SPECIFICATION
Specification
CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994.
Drawing no.
OFBH DRG NO. OFB/C/1561
Testing / Inspection Facility
99
417800
Number
CENTER PARTITION FOR BOX C-53A
Description
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Testing / Inspection Facility
99
43750
Number
CARRYING LINK
Description
DRG.NO OFB/C/1540
Specification
DRG.NO OFB/C/1540
Drawing no.
DRG.NO OFB/C/1540
Testing / Inspection Facility
99
104000
Number
CHANNEL - FOR BOX C-53A
Description
AS PER DRG./SPECIFICATION
Specification
AS PER DRG./SPECIFICATION
Drawing no.
OFBH DRG NO. OFB/C/1476
Testing / Inspection Facility
99
75125
Number
BRACKET FOR AMMN. BOX SM 601C
Description
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
Drawing no.
OFBH-SM601-C-2002
Testing / Inspection Facility
99
29000
Number
PIECE PACKING 'B'
Description
PIECE PAKING 'B' FOR BOX C44A
Specification
AS PER DRG NO. OFB/C/1541
Drawing no.
DRG NO. OFB/C/1541
Testing / Inspection Facility
99
108500
Number
PIECE PACKING FOR BOX SM 601
Description
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
Drawing no.
OFBH-SM601-C-2003
Testing / Inspection Facility
99
22000
Number
PIECE PACKING 'A'
Description
PIECE PACKING 'A' AS PER REF. PART NO. ISV1820
Specification
PIECE PACKING 'A' AS PER REF. PART NO. ISV1820
Drawing no.
OFBH DRG. NO. OFB/C/1539
Testing / Inspection Facility
99
26750
Number
CATCH PLATE WITHOUT ASSLY. OF BOX H2A
Description
AS PER DRG./SPECIFICATION
Specification
AS PER DRG./SPECIFICATION
Drawing no.
OFBH DRG NO. OFB/C/717
Testing / Inspection Facility
99
252000
Number
ASSEMBLE SECURING PLATE/1545 BOX H2A
Description
AS PER DRG./SPECIFICATION
Specification
AS PER DRG./SPECIFICATION
Drawing no.
OFBH DRG NO. OFB/C/722
Testing / Inspection Facility
99
252000
Number
BOTTOM FRAME FOR CARRIER 13A
Description
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Drawing no.
OFBH DRG NO. OFB/C/803
Testing / Inspection Facility
99
20680
Number
TOP FRAME FOR CARRIER 13A
Description
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Specification
AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
Testing / Inspection Facility
99
20550
Number
ENGAGING PLATE FOR BOXH2A
Description
ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718.
Specification
ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718.
Testing / Inspection Facility
99
252000
Number
HINGE WITH HINGE PIN ASSY FOR BOX H2A
Description
HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067
Specification
HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067
Drawing no.
DRAWING NO. 0FBH-H2A-C-2067
Testing / Inspection Facility
99
325000
Number
ANGLE PLATE VERTICAL AS PER DRG. NO. OFBH-CA-13-C-1969
Description
AS PER DRG./SPECIFICATION
Specification
ANGLE PLATE VERTICAL FOR CARRIER 13A/16A AS PER DRG NO. OFBH-CA-13-C-1969
Drawing no.
OFBH-CA-13-C-1969
Testing / Inspection Facility
99
91875
Number
32882
107/028/PV(A)/TE16-1148/17-18/ 58
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
32883
20170348/PV/0733/EOT/F
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
32884
OFD/PV/G-1/VRF_3
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
GOGGLES CASE DRG.ODD/M/2826
Description
GOGGLES CASE DRG.ODD/M/2826
Specification
GOGGLES CASE DRG.ODD/M/2826
Drawing no.
DRG.ODD/M/2826
Testing / Inspection Facility
74
96600
Number
32885
MPF/OTE/17TE211004/2017
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
Casting for Transmission Gear Unit to Drg. No. 175 45 001 SB
Description
Casting for Transmission Gear Unit to Drg. No. 175 45 001 SB
Specification
Casting for Transmission Gear Unit to Drg. No. 175 45 001 SB
Drawing no.
Drg. No. 175 45 001 SB
Testing / Inspection Facility
38
101
Number
32886
3173000591
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
32887
170358FHFO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
RELIEVING TOOL TO PT.NO.1153025.
Description
RELIEVING TOOL TO PT.NO.1153025.
Specification
RELIEVING TOOL TO PT.NO.1153025.
Drawing no.
FOR DETAILED DRAWINGS, SPECIFICATION, TERMS AND CONDITION PLEASE VISIT OFB EPROC PORTAL.
Testing / Inspection Facility
90
40 SET
Set
32888
OFMK/TM/V417517/2017-18
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
Name
Code
Quantity
Approx Value
Select
TURRET ELECTRICAL EQUIPMENT TO DRG NO 678-95-CD5 KIT B
Description
TURRET ELECTRICAL EQUIPMENT TO DRG NO 678-95-CD5 KIT B
Specification
TURRET ELECTRICAL EQUIPMENT TO DRG NO 678-95-CD5 KIT B
Drawing no.
678-95-CD5 KIT B
Testing / Inspection Facility
95
125
Set
32889
OFMK/TM/V 415117 DT:12/10/2017
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
Name
Code
Quantity
Approx Value
Select
TURRET ELECTRICAL EQUIPMENT 678-95-CD5 KIT B
Description
TURRET ELECTRICAL EQUIPMENT 678-95-CD5 KIT B
Specification
TURRET ELECTRICAL EQUIPMENT 678-95-CD5 KIT B
Testing / Inspection Facility
95
137
Set
32890
OLF/MM-2/T-1706011722/2017
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
WIRE PETV-0.08 (L.F.NO.9001121624)
Description
WIRE PETV-0.08 AS PER OST -16-0.505.001-74
Specification
WIRE PETV-0.08 AS PER OST -16-0.505.001-74
Testing / Inspection Facility
90
24
Kilogram
WIRE PVC MGSHV 0.14 SQMM BLACK (L.F.NO.9001120906)
Description
PVC WIRE MGSHV 0.14 SQMM (BLACK) AS PER SPECN. NO. TY16-505.437-82
Specification
PVC WIRE MGSHV 0.14 SQMM (BLACK) AS PER SPECN. NO. TY16-505.437-82
Testing / Inspection Facility
90
2557
Metre
WIRE PVC MGSHV-0.14MMSQ YELLOW (L.F.NO.9001120902)
Description
PVC WIRE MGSHV 0.14 SQMM (YELLOW) AS PER SPECN. NO. TY16-505.437-82
Specification
PVC WIRE MGSHV 0.14 SQMM (YELLOW) AS PER SPECN. NO. TY16-505.437-82
Testing / Inspection Facility
90
815
Metre
WIRE-MGSHV-0.35 SQMM (L.F.NO.9001120548)
Description
UNSHIELDED MULTISTRAND FLEXIBLE WIRE (FIBROUS LAPPED & PVCINSULATED WIRE) MGSHV-0.35 SQMM (19/0.16) FOR INSTRUMENTSWITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SPECIFICATION NO: OLF/MSD/WIRE/01/MOD-1.(COLOUR- ORANGE/GRAY)
Specification
UNSHIELDED MULTISTRAND FLEXIBLE WIRE (FIBROUS LAPPED & PVCINSULATED WIRE) MGSHV-0.35 SQMM (19/0.16) FOR INSTRUMENTSWITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SPECIFICATION NO: OLF/MSD/WIRE/01/MOD-1.(COLOUR- ORANGE/GRAY)
Testing / Inspection Facility
90
60000
Metre
WIRE-PVC WITH SHIELD -2X0.35 (L.F.NO.9001120484)
Description
WIRE-PVC WIRE WITH SHIELDING -2 CORE-MPSPOE-2X0.35 SQMM AS PER SPECN. OLF/AL/WIRE/06/MOD
Specification
WIRE-PVC WIRE WITH SHIELDING -2 CORE-MPSPOE-2X0.35 SQMM AS PER SPECN. OLF/AL/WIRE/06/MOD
Testing / Inspection Facility
90
1450
Metre
WIRE TEF. WITHSHLD. MGTFE-2X0.12 (L.F.NO.9001120431)
Description
TEFLON WIRE WITH SHIELDING-MGTFE-2.0X0.12 SQMM AS PER SPECN. NO. TY16.505.185-73
Specification
TEFLON WIRE WITH SHIELDING-MGTFE-2.0X0.12 SQMM AS PER SPECN. NO. TY16.505.185-73
Testing / Inspection Facility
90
290
Metre
WIRE MGTF-0.07 (L.F.NO.9001120361)
Description
WIRE MGTF-0.07, TU16.505.185-71
Specification
WIRE MGTF-0.07, TU16.505.185-71
Testing / Inspection Facility
90
3500
Metre
WIRE PETNX-155-0.4 (L.F.NO.7441122121)
Description
WIRE PETNX-155-0.4 AS PER SPECN. NO. TU16-505.810-75
Specification
WIRE PETNX-155-0.4 AS PER SPECN. NO. TU16-505.810-75
Testing / Inspection Facility
74
2.500
Kilogram
WIRE 0.8 MM ( L.F.NO.7441122097)
Description
WIRE 0.8 MM AS PER SPECN. NO. TY.16.K71-087-90
Specification
WIRE 0.8 MM AS PER SPECN. NO. TY.16.K71-087-90
Testing / Inspection Facility
74
160
Metre
BRAID PML 3X6 (L.F.NO.7441122096)
Description
BRAID PML 3X6 AS PER SPECN. NO. TY22-3708-76
Specification
BRAID PML 3X6 AS PER SPECN. NO. TY22-3708-76
Testing / Inspection Facility
74
100
Metre
WIRE 44A0111-18-0 (L.F.NO.7441122034)
Description
WIRE 44A0111-18-0
Specification
WIRE 44A0111-18-0
Testing / Inspection Facility
74
81
Metre
WIRE MC16-13 1X0.2 CH (L.F. NO. 7441122033)
Description
WIRE MC16-13 1X0.2 CH AS PER SPECN. NO. TU16.505.083-78
Specification
WIRE MC16-13 1X0.2 CH AS PER SPECN. NO. TU16.505.083-78
Testing / Inspection Facility
74
1604
Metre
WIRE PVKH15X0.20 (L.F.NO.7441122032)
Description
WIRE PVKH15X0.20 AS PER GOST-16214-86
Specification
WIRE PVKH15X0.20 AS PER GOST-16214-86
Testing / Inspection Facility
74
1.960
Kilogram
WIRE BELDEN 83050 (L.F.NO.7441122031)
Description
WIRE BELDEN 83050
Specification
WIRE BELDEN 83050
Testing / Inspection Facility
74
854
Metre
WIRE MC16-131X0.12CH (L.F.NO.7441122030)
Description
WIRE MC16-131X0.12CH AS PER SPECN. NO. TU16.505.083-78
Specification
WIRE MC16-131X0.12CH AS PER SPECN. NO. TU16.505.083-78
Testing / Inspection Facility
74
1254
Metre
WIRE PEVNX-2-0.40 (L.F.NO.7441121453)
Description
WIRE PEVNX-2-0.40 AS PER SPECN.NO. TU16-705.425-86)
Specification
WIRE PEVNX-2-0.40 AS PER SPECN.NO. TU16-705.425-86)
Testing / Inspection Facility
74
4.820
Kilogram
BRAID PML 6X10 (L.F.NO.7441120357)
Description
BRAID PML 6X10 AS PER TY22-3708-76
Specification
BRAID PML 6X10 AS PER TY22-3708-76
Testing / Inspection Facility
74
776
Metre
32891
OFMK/TM/V413717
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
Name
Code
Quantity
Approx Value
Select
FAN 773-82-CB106
Description
FAN 773-82-CB106
Specification
FAN 773-82-CB106
Testing / Inspection Facility
82
548
Number
32892
V000418417
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
Name
Code
Quantity
Approx Value
Select
COOLING AND PRE HEATING SYSTEM TO DRG. NO.675-08--Cb2
Description
COOLING AND PRE HEATING SYSTEM TO DRG. NO.675-08--Cb2 CQA(ICV)QAI/026
Specification
CQA(ICV)QAI/026
Drawing no.
675-08--Cb2 (ALL DRAWINGS ARE UPLOADED WITH TENDER ENQUIRY IN OFB E-PROC WEB SITE
Testing / Inspection Facility
08
94
Set
32893
3173000588
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
32894
3173000587
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
32895
3173000586
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
32896
3173000585
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
32897
3173000584
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
32898
3173000583
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
32899
3173000582
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
BACK SIGHT D S CAT NO 1005 000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC I 24314 SA DT 06 04 1999
Description
BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.
Specification
BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.
Drawing no.
D S CAT NO-1005-000823
Manufacturing Technology
Manufacturing technology:- Machining of component
Testing / Inspection Facility
1) Testing/Inspection Facility:- Chemical a Mechanical properties as per std. given drawing . 2) Dimensional inspection, for all dimensions given in the drawings a other parameter which are mentioned in relevant drawings.
70
2465
Number
32900
EOI/28/Pin Tent Angle
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
Name
Code
Quantity
Approx Value
Select
NAILS WIRE STEEL COUNTER SUNK HEAD OF VARIOUS DIMENSIONS
Description
VARIOUS DIMENSIONS ARE- 2.5MM DIA *45 MM LONG, 1.8MM DIA *25 MM LONG AND 1.60MM DIA *16 MM LONG
Specification
IS:723 LATEST
Testing / Inspection Facility
21
As per requirement
Kilogram
PIN TENT CARBON STEEL SMALL 8340-000508
Description
IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED
Specification
IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED
Testing / Inspection Facility
21
As per requirement
Number
DEES STEELS VARIOUS
Description
AS PER REQUIREMENT AND SPECIFICATION
Specification
AS PER REQUIREMENT AND SPECIFICATION
Testing / Inspection Facility
21
As per requirement
Kilogram
PIN TENT ANGLE IRON MED. MK-2
Description
CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986
Specification
CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986
Testing / Inspection Facility
21
As per requirement
Number
COPPER RODS OR ROUNDS OR WIRES VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
As per requirement
Kilogram
ALUMINIUM ALLOY RODS OR ROUNDS OR WIRES VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Kilogram
BRASS RODS OR ROUNDS OR WIRES VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
As per requirement
Kilogram
RIVETS STEELS VARIOUS
Description
AS PER REQUIREMENT AND SPECIFICATION
Specification
AS PER REQUIREMENT AND SPECIFICATION
Testing / Inspection Facility
21
As per requirement
Number
RIVETS COPPER VARIOUS
Description
AS PER REQUIREMENT AND SPECIFICATION
Specification
AS PER REQUIREMENT AND SPECIFICATION
Testing / Inspection Facility
21
As per requirement
Number
RIVETS COPPER VARIOUS
Description
AS PER REQUIREMENT AND SPECIFICATION
Specification
AS PER REQUIREMENT AND SPECIFICATION
Testing / Inspection Facility
21
As per requirement
Number
RIVETS BRASS VARIOUS
Description
AS PER REQUIREMENT AND SPECIFICATION
Specification
AS PER REQUIREMENT AND SPECIFICATION
Testing / Inspection Facility
21
As per requirement
Number
Rivet Aluminium Alloy various
Description
as per requirement
Specification
as per requirement
Testing / Inspection Facility
21
As per requirement
Number