FORGING FOR BUFFER BODY (LOWER) TO DRG.NO GCF MN 5521 MATL.-IS:734-1975 (RE AFFIRMED 2001) DESIGNATION 24534 'W' CONDITION.

FORGING FOR BUFFER BODY (LOWER) TO DRG.NO GCF MN 5521 MATL.-IS:734-1975 (RE AFFIRMED 2001) DESIGNATION 24534 'W' CONDITION.

Aluminum Casting for Buffer Body Lower (Process: Die Casting) to achieve Radiography level-II in high stress zone i.e. Lug portion of casting & Radiography level-III in relatively less stress zone i.e. remaining portion of body to Drg. No. GCF-MN-5474 (D)

Aluminum Casting for Buffer Body Lower (Process: Die Casting) to achieve Radiography level-II in high stress zone i.e. Lug portion of casting & Radiography level-III in relatively less stress zone i.e. remaining portion of body to Drg. No. GCF-MN-5474 (D)

GCF-MN-5474 (D)

SINGLE WEAPON PACKING FOR TEAR GAS GUN

SINGLE WEAPON PACKING FOR TEAR GAS GUN

CAP EL-100 MF 20%, 63V Drg No.RS STOCK 493-856 CAPACITOR ELECTROLYTIC AXIAL TYPE100 MF +/-20%, 63V, RS STOCK NO 493-856

CAP EL-100 MF 20%, 63V Drg No.RS STOCK 493-856 CAPACITOR ELECTROLYTIC AXIAL TYPE100 MF +/-20%, 63V, RS STOCK NO 493-856

BULB OPMT-26-15 SPEC NO. TY16.535.662-77

BULB OPMT-26-15 SPEC NO. TY16.535.662-77

CAP POLY.MET. 0.22 MF 10%, 63V

CAP POLY.MET. 0.22 MF 10%, 63V

CAP ELECT.AXIAL 10 MF 10% 63V

CAP ELECT.AXIAL 10 MF 10% 63V

7441122006 RESISTER S2-33N-0,125-10KOHM Drg No.OZHO.467.093TU RESISTER S2-33N-0,125-10KOHM+/ -2%-A-V-V AS PER SPECN.NO, OZHO.467.093TU

7441122006 RESISTER S2-33N-0,125-10KOHM Drg No.OZHO.467.093TU RESISTER S2-33N-0,125-10KOHM+/ -2%-A-V-V AS PER SPECN.NO, OZHO.467.093TU

7440200367 RESISTOR SP5-21A-1-680 OHM Drg No.OZHO.468.530 TY RESISTOR SP5-21A-1-680 OHM +/- 1% AS PER SPECIFICATION NO. OZHO.468.530 TY

7440200367 RESISTOR SP5-21A-1-680 OHM Drg No.OZHO.468.530 TY RESISTOR SP5-21A-1-680 OHM +/- 1% AS PER SPECIFICATION NO. OZHO.468.530 TY

specn.no:-ADRDE/QMS/TDTM/SPECN/93

specn.no:-ADRDE/QMS/TDTM/SPECN/93

ASSEMBLY COIL SPRING

Drg. No. 1.3.01-02-01(b) except Mn% as per BS: 1408-M:1954 i.e. 0.25-0.75%

Drg. No. 1.3.01-02-01(b)

A4/5340-006721 BUCKLE WAIST ADJUSTABLE ADOPTER (SLIDING BAR TYPE) PTRM SPECN.NO.IND/GS/1802

SPECN.NO.IND/GS/1802

IND/GS/1802

ADRDE/292(d)

ADRDE/292(d)

ADRDE/292(d)

MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)

MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)

TEND 2642

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM

SPECIFICATION:- ADRDE/SPECN/2002/56(b)(VARIETY NO.-1)

FARIC NYLON 48 +-2 GM U/D TWILL WEAVE 92 CM

SPECIFICATION : ADRDE/SPECN/2002/56(b)

BRUSH CLEANING FOR TEAR GAS GUN

BRUSH CLEANING FOR TEAR GAS GUN

MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN,

MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN,

RFI SK-9118-GG, MOTHER BOX FOR PACKING OF 05 NOS. OF SINGLEWEAPON PACKING OF TEAR GAS GUN.

AS PER DRAWING

RFI SK-9118-GG

PARA ARAMID WOVEN FABRIC.

PARA ARAMID WOVEN FABRIC. SPECIFICATION : AS PER ATTACHED FILE "SPECIFICATION".

FABRICATION OF SOCKS BLACK.

i. FABRICATION OF SOCKS BLACK. ii. THE FABRICATION INCLUDES KNITTING, LINKING, WASHING, PRESSING AND PASSING OPERATION. iii. FABRICATION OF SOCKS BLACK WILL BE STRICTLY AS PER SPECN AIR HQ/DQAS/AK-037, DS CAT NO 8440-000467 TO 473.

• AS PER SPECIFICATION

• AS PER SPECIFICATION

TAPE NYLON 66, 21 MM BS 600 KGF

ADRDE/Specn/2000/54(d)

ADRDE/Specn/2000/54(d)

CLOTH DRILL COTTON NAVY BLUE 142 CMS (V.NO.4) MINIMUM EXCLUDING SELVEDGES (NHQ).

CLOTH DRILL COTTON NAVY BLUE 142 CMS (V.NO.4) MINIMUM EXCLUDING SELVEDGES (NHQ). SPECIFICATION : IS : 177 - 1989 (IVTH REVISION) REAFFIRMED 2014 CONFIRMING TO V. NO.4

TAPE NYLON 26 MM 500 KGF U/D

ADRDE/Specn/2000/54(d)

ADRDE/Specn/2000/54(d)

THREAD SEWING NYLON LIGHT OG VARIETY NO. L- 2. 3 STAND OG (BL-35N(MIN)) SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

MALE CONNECTOR

ADRDE/PAS/2008/24(a)

ADRDE/PAS/2008/24(a)

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

FAB.NYL.66,93 GM.U/DWIDTH 101+-1 CM.(EXCLUDING SELVEDGE)

SPECN-ADRDE/SPECN/2000/53(b)

SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN

DRAWING NO JSS: 5340-05:2014

DRAWING NO JSS: 5340-05:2014

• As per Drawing/Specification

• As per Drawing/Specification

WEBBING NYLON 60MM BS4000KG U/D IN ROLL LENGTH 105M(EXCL.SAMPLING)

SPECN-AS PER PARTICULARS---- WIDTH :60(+0,-2)MM THICKNESS :4.0(+-0.1MM, WEIGHT/METER 135 GM BREAKING STRENGTH :4000 KG(MIN),HEAT SETTG:PR.HET.SETG REQD TOTAL NO.OF END:309+1 INTERLOCK.THREAD(4 END WORKING AS ONE) PICKS/DM :104[52(2 PICKS/SHED) DENIER OF YARN :(a)ENDS:840X3,(b)PICKS:840X2 TPM (RANG):WARP-FINAL:200-210,INITIAL:325-335,WEFT-210-220 EXTENSION:20-30%, WEAVE:2/1 DOUBLE TWILL WEAVE,WEFT INTERCHANGING BETWEEN LAYERS, REVERSAL OF TWILL DIRECTION OCCURS AT 96th & 206th ENDS(TWO ENDS WORKING AS ONE AND TWO PICKS/SHED

DRAWING NO:ADRDE/305(b).

DRAWING NO:ADRDE/305(b).

DRAWING NO:ADRDE/305(b).

• lathe machine

• hardness testing

FABRICATION OF JACKET & TROUSERS COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO 220 GSM.

FABRICATION OF JACKET & TROUSERS COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO 220 GSM. SWO PART II No. 60247. SPECIFICATION: OCFAv/Garment/001(c) for JCD OCFAv/Garment/002(c) for TCD MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION.

SNAP HOOK QUICK EJECTOR

ADRDE/1210(c)

ADRDE/1210(c)

• ADRDE/1210(c)

• ADRDE/1210(c)

SPECN-AS PER PARTICULARS. WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX) WEIGHT/METER :5.2 GM(MAX) BREAKING STRENGTH :150 KG(MIN) HEAT SETTING :PROPER HEAT SETTING IS REQUIRED WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE) TOTAL NO.OF ENDS :228 PICKS/CM :24 DENIER OF YARN :(a)ENDS:153,(b)PICKS :150 T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215 EXTENSION AT BREAK :20-30%

SPECN-AS PER PARTICULARS. WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX) WEIGHT/METER :5.2 GM(MAX) BREAKING STRENGTH :150 KG(MIN) HEAT SETTING :PROPER HEAT SETTING IS REQUIRED WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE) TOTAL NO.OF ENDS :228 PICKS/CM :24 DENIER OF YARN :(a)ENDS:153,(b)PICKS :150 T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215 EXTENSION AT BREAK :20-30%

FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.

SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S.

SWITCH ASSY AND AXLE WITH LEVER DRG NO GCF TM 47 B SHEET 1 AND 2

SWITCH ASSY AND AXLE WITH LEVER DRG NO GCF TM 47 B SHEET 1 AND 2

Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

• Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

• Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

FEMALE PORTION OF CWL

Female Portion of Canopy Withdrawl Line (CWL) for Kiran A/C/Jaguar A/C

Specn No. ADRDE/1343(e).

• As per specification/drawing

• As per specification/drawing

SHACKLE WITH NUT AND BOLT GREY 62248

DRG. NO. ADRDE/ PAS/2008/25

DRG. NO. ADRDE/ PAS/2008/25

SHACKLE WITH NUT AND BOLT (BLACK)

DRG. NO. ADRDE/ 1348-G (b)

DRG. NO. ADRDE/ 1348-G (b)

DRG. NO-ADRDE/1380.

DRG. NO-ADRDE/1380.

DRG. NO-ADRDE/1380.

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

DRG.NO.:ADRDE/1297 ( b )

DRG.NO.:ADRDE/1297 ( b )

TRIGGER MECHANISM TO DRG. No. 2A46M CD 10-27CB

TRIGGER MECHANISM TO DRG. No. 2A46M CD 10-27CB

. 2A46M CD 10-27CB

FIRING MECHANISM ASSY. TO DRG NO. 2A46-CD10-20CB

FIRING MECHANISM ASSY. TO DRG NO. 2A46-CD10-20CB

2A46-CD10-20CB

INDUCTION HARDENING OF SECTOR DRG No. 675- 54-190

INDUCTION HARDENING OF SECTOR DRG No. 675- 54-190

675- 54-190

INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438 [ FOR FIRST TIME PROCUREMENT FIRM SHOULD DO TRIAL, TESTING OF FIRST SHIELD BY CUTTING/SECTIONING OF FIRST INDUCTION HARDENING SHIELD, PREPARING TEST PIECE AND HARDNESS TESTING AT 1MM INTERVALS, TO SHOW THE PROCESS ESTABLISHMENT FOR CORRECT HARDNESS AND DEPTH AS PER DRAWING ]. NOTE:- MATERIAL/COMPONENT WILL BE SUPPLIED BY GCF.

INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438 [ FOR FIRST TIME PROCUREMENT FIRM SHOULD DO TRIAL, TESTING OF FIRST SHIELD BY CUTTING/SECTIONING OF FIRST INDUCTION HARDENING SHIELD, PREPARING TEST PIECE AND HARDNESS TESTING AT 1MM INTERVALS, TO SHOW THE PROCESS ESTABLISHMENT FOR CORRECT HARDNESS AND DEPTH AS PER DRAWING ]. NOTE:- MATERIAL/COMPONENT WILL BE SUPPLIED BY GCF.

675 51 CD162CB 1005 560438

Fabric Plain Weave Flame Retardant Blue 150 cm width excluding selvedges.

Fabric Plain Weave Flame Retardant Blue 150 cm width excluding selvedges. Specification No.1201908/001

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE.

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE. SPECIFICATION NO.:1201909/003

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD.

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD. SPECIFICATION NO.:1201909/003

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE SPECIFICATION NO.:1201909/003

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD.

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD. SPECIFICATION NO.:1201909/003

9927093106 SHIELDING BRAID (PML)- 16X24 SHIELD BRAID PML-16X24 AS PER SPECN.NO:-OLF/AL/SHIELD /01/MOD

9927093106 SHIELDING BRAID (PML)- 16X24 SHIELD BRAID PML-16X24 AS PER SPECN.NO:-OLF/AL/SHIELD /01/MOD

9927077166 SLEEVE PVC, 3.31TV40-2.5X0.4MM PVC SLEEVE 3.31TV40-2.5X0.4 AS PER JSS-54801 AND SPECN NO:OLF/AL/SLV/02/MOD

9927077166 SLEEVE PVC, 3.31TV40-2.5X0.4MM PVC SLEEVE 3.31TV40-2.5X0.4 AS PER JSS-54801 AND SPECN NO:OLF/AL/SLV/02/MOD

9927077150 SLEEVE PVC 3.31TV50-1.0X0.4 PVC SLEEVE (3.31TV 50)-1.0X0.4 MM AS PER JSS-54801 AND SPECN NO-OLF/MSD/SLV/02/MOD

9927077150 SLEEVE PVC 3.31TV50-1.0X0.4 PVC SLEEVE (3.31TV 50)-1.0X0.4 MM AS PER JSS-54801 AND SPECN NO-OLF/MSD/SLV/02/MOD

9001121614 POLY. WINDING WIRE PAEV -1-0.5 Drg No.GOST-7262-78 POLY. WINDING WIRE PAEV -1-0.5 AS PER GOST-7262-78

9001121614 POLY. WINDING WIRE PAEV -1-0.5 Drg No.GOST-7262-78 POLY. WINDING WIRE PAEV -1-0.5 AS PER GOST-7262-78

9001120710 WIRE MGSH-0.05, GOST-10349-75 WIRE MGSH-0.05, GOST-10349-75

9001120710 WIRE MGSH-0.05, GOST-10349-75 WIRE MGSH-0.05, GOST-10349-75

9001120436 SLEEVE(HEAT SHRINKABLE)-6X0.25 SLEEVE (HEAT SHRINKABLE SLEEVE )-NOMINAL SIZE-6X0.25 MM AS PER SPECN. NO: OLF/AII/AL/1 1/HSS ATTACHED

9001120436 SLEEVE(HEAT SHRINKABLE)-6X0.25 SLEEVE (HEAT SHRINKABLE SLEEVE )-NOMINAL SIZE-6X0.25 MM AS PER SPECN. NO: OLF/AII/AL/1 1/HSS ATTACHED

9001120308 SLEEVE-TLV-1.0 ,GOST-9614-75 SLEEVE-TLV-1.0, GOST-9614-75

9001120308 SLEEVE-TLV-1.0 ,GOST-9614-75 SLEEVE-TLV-1.0, GOST-9614-75

7441122809 SLEEVE F-4DE-2.5 X 0.4 Drg No.GOST-22056-76 SLEEVE F-4DE-2.5 X 0.4 AS PER GOST-22056-76

7441122809 SLEEVE F-4DE-2.5 X 0.4 Drg No.GOST-22056-76 SLEEVE F-4DE-2.5 X 0.4 AS PER GOST-22056-76

7441122799 WIRE MGSHV 1.5B Drg No.TU16-505.437-82 WIRE MGSHV 1.5B AS PER SPECN. NO. TU16-505.437-82

7441122799 WIRE MGSHV 1.5B Drg No.TU16-505.437-82 WIRE MGSHV 1.5B AS PER SPECN. NO. TU16-505.437-82

7441120500 PVC SLEEVE 2.0 X 0.4 MM PVC SLEEVE 2.0 X 0.4 MM WHITE COLOUR JSS-54808

7441120500 PVC SLEEVE 2.0 X 0.4 MM PVC SLEEVE 2.0 X 0.4 MM WHITE COLOUR JSS-54808

7441120366 PVC SLEEVE 3.0X0.4 PVC SLEEVE 3.0X0.4 WHITE COLOUR AS PER GOST 19034-82 JSS-54808

7441120366 PVC SLEEVE 3.0X0.4 PVC SLEEVE 3.0X0.4 WHITE COLOUR AS PER GOST 19034-82

7440901255 CORD SLEEVE SH CH SH CORD SLEEVE SH CH SH-1.0-23 AS PER SPECN. NO. OST 17-184-88

7440901255 CORD SLEEVE SH CH SH CORD SLEEVE SH CH SH-1.0-23 AS PER SPECN. NO. OST 17-184-88

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR

K-4110*5

• AS PER DRAWING
• MACHINING
• FABRICATION

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.

SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.

DRAWING ADRDE/271(b)

BODY DRG NO AL8035169 LF NO 7440205758

BODY DRG NO AL8035169 LF NO 7440205758

AL8.035.169

HOLDER TO DRG NO AL9.329.994 (LF7440205667)

HOLDER TO DRG NO AL9.329.994 (LF7440205667)

LEVER TO DRG NO BL9185830 LF NO 7420112083

LEVER TO DRG NO BL9185830 LF NO 7420112083

BL9185830

FABRIC UNIDIRECTIONAL 160 CM WIDTH USED IN SOFT ARMOUR PANEL SAP OF BODY ARMOUR

FABRIC UNIDIRECTIONAL 160 CM WIDTH USED IN SOFT ARMOUR PANEL SAP OF BODY ARMOUR SPECIFICATION NO. : 1201909/001

BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS

BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS SPECIFICATION NO. : 1201909/002

STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.

STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.

INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*14FOR RIFLE 5.56MM INSAS

INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*14FOR RIFLE 5.56MM INSAS

RFI SK.NO.5709*14

9081008167 LINK BEARING TO DRAWING NO 6289044

LINK BEARING TO DRAWING NO.6289044.

9081008166 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6293295.

9081008165 BEARING TO DRAWING NO 6293496

BEARING TO DRAWING NO.6293496.

9081008164 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6298987.

9081008163 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6298988.

9081008162 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6298989.

9081008161 LINK BEARING TO DRAWING NO. 6333019

LINK BEARING TO DRAWING NO. 6333019

9081008160 LINK BEARING TO DRAWING NO 6339977

LINK BEARING TO DRAWING NO. 6339977