BRASS ROD 45 MM DIA. GRADE-2, HB TO IS:319-2007

BRASS ROD 45 MM DIA. GRADE-2, HB TO IS:319-2007

TIN BRONZE INGOTS - NON MAGNETIC, IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.) NOTE: NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.

TIN BRONZE INGOTS - NON MAGNETIC, IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.) NOTE: NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.

G.M.BAR 1/2"SQR.BS-1400/G1-C

G.M.BAR 1/2"SQR.BS-1400/G1-C

Electric Pneumatic value EK 48 with Plug SHPLM 2 TY EK 48 CQA ICV QAI 029

Electric Pneumatic value EK 48 with Plug SHPLM 2 TY EK 48 CQA ICV QAI 029

GUN METAL ROD 50MM DIA TO IS-306/1983 IN CONTINOUS CAST CONDITION

GUN METAL ROD 50MM DIA TO IS-306/1983 IN CONTINOUS CAST CONDITION

NON MAG GUN METAL ROD 25 MM DIA.TO IS- 306/1983( IN CONTINOUS CAST CONDITION)

NON MAG GUN METAL ROD 25 MM DIA.TO IS- 306/1983( IN CONTINOUS CAST CONDITION)

NON-MAGNETIC GUN METAL ROD 19 MM DIA. AS PER IS-306.1983

NON-MAGNETIC GUN METAL ROD 19 MM DIA. AS PER IS-306.1983

LEADED TIN BRONZE ROD 61 MM DIA TO SPEC:IS 318-1981 , GDE-LTB4

LEADED TIN BRONZE ROD 61 MM DIA TO SPEC:IS 318-1981 , GDE-LTB4

TIN BRONZE TO IS:306-1983 ROD 57MM DIA

TIN BRONZE TO IS:306-1983 ROD 57MM DIA

BRASS SHEET 5.00 MM THICK IS-410-1977 CU ZN 30 HB

BRASS SHEET 5.00 MM THICK IS-410-1977 CU ZN 30 HB

NON MAGNETIC NI - SILVER STRIP 18% SIZE 16SWG X 1" WIDE TO SPECN IS-2283-1981 NS-10 HB

NON MAGNETIC NI - SILVER STRIP 18% SIZE 16SWG X 1" WIDE TO SPECN IS-2283-1981 NS-10 HB

PHOSPHOR BRONZE SHEET 18SWG(1.25MM) THICK X 305 X1219 MM AS PER SPEC. IS-7814-1985 GRADE II HB

PHOSPHOR BRONZE SHEET 18SWG(1.25MM) THICK X 305 X1219 MM AS PER SPEC. IS-7814-1985 GRADE II HB

NON-MAGNETIC BRASS ROD 16MM DIA IS-319/1989, GDE-1 , HB (F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)

NON-MAGNETIC BRASS ROD 16MM DIA IS-319/1989, GDE-1 , HB (F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)

N.M.P.B.ROD 3/8"DIA. IS:7811-1985 PHOSPHER BRONZE NON MAGNETC

N.M.P.B.ROD 3/8"DIA. IS:7811-1985 PHOSPHER BRONZE NON MAGNETC

PHOSPHORBRONZ EXTRUDED AND DRAWN. 70.MM (2-3/4") DIA ROD TO SPECN. IS.7811/1985

PHOSPHORBRONZ EXTRUDED AND DRAWN. 70.MM (2-3/4") DIA ROD TO SPECN. IS.7811/1985

P.B. ROD 57 MM DIA TO SPECIFICATION IS-1385-1968, PCUSN4

P.B. ROD 57 MM DIA TO SPECIFICATION IS-1385-1968, PCUSN4

PHOSPHOR BRONZE ROD 44 MM DIA SPECN.IS-7811-1985

PHOSPHOR BRONZE ROD 44 MM DIA SPECN.IS-7811-1985

NAVAL BRASS ROD 31 MM DIA IS: 291-1989 GD-IHB (FE CONTENT NOT MORE HAN 0.05%)

NAVAL BRASS ROD 31 MM DIA IS: 291-1989 GD-IHB (FE CONTENT NOT MORE HAN 0.05%)

PHOS.BRON.ROD 29 MM DIA-IS-7811/1985

PHOS.BRON.ROD 29 MM DIA-IS-7811/1985

PHOSPHOR BRONZE ROD 25.MM.DIA. IS-7811- 1985

PHOSPHOR BRONZE ROD 25.MM.DIA. IS-7811- 1985

PHOSPHOR BRONZE ROD 22 MM DIA IS - 7811-1985

PHOSPHOR BRONZE ROD 22 MM DIA IS - 7811-1985

PHOSPHOR BRONZE ROD 16 MM DIA IS-7811-1985

PHOSPHOR BRONZE ROD 16 MM DIA IS-7811-1985

NON MAGNETIC PHOS.BRONZE ROD 13 MM DIA (DRAWN CONDITION) IS:7811-1985

NON MAGNETIC PHOS.BRONZE ROD 13 MM DIA (DRAWN CONDITION) IS:7811-1985

TIN BRONZE INGOTS TO SPECIFICATION IS:306-1983

TIN BRONZE INGOTS TO SPECIFICATION IS:306-1983

PHOSPHOR BRONZE STRIP 1.25 MM THICK X 25.40 MM WIDE SPECIFICATION IS:1385/PCUSN4, CONDITION-H.

PHOSPHOR BRONZE STRIP 1.25 MM THICK X 25.40 MM WIDE SPECIFICATION IS:1385/PCUSN4, CONDITION-H.

NON-MAG.TIN.BRONZE FLAT 22.23 X 42 MM WIDE AS PER IS:306-1983

NON-MAG.TIN.BRONZE FLAT 22.23 X 42 MM WIDE AS PER IS:306-1983

NON.MAG.PHOS.BRONZE WIRE 0.71MM IS:7608-1987GDE-1HD(FE CONT.RESTRICTD 0. 01% NOTE: MAGNTIC PROPERTY WILL BE CHCKED BY MAGNTIC NEEDLE AT THE DISTANCE 1.00MM FR OM SUBJECT ITEM

NON.MAG.PHOS.BRONZE WIRE 0.71MM IS:7608-1987GDE-1HD(FE CONT.RESTRICTD 0. 01% NOTE: MAGNTIC PROPERTY WILL BE CHCKED BY MAGNTIC NEEDLE AT THE DISTANCE 1.00MM FR OM SUBJECT ITEM

PHOSPHER BRONZE ROD 44 MM DIA. GRADE 1/2 HP CU SN OF IS:1385-1968

PHOSPHER BRONZE ROD 44 MM DIA. GRADE 1/2 HP CU SN OF IS:1385-1968

HIGH TENSILE BRASS ROD 57.10 MM (2-1/4") DIA. TO SPECN. IS-320 GR. HT2. CONDITION `M' 1980

HIGH TENSILE BRASS ROD 57.10 MM (2-1/4") DIA. TO SPECN. IS-320 GR. HT2. CONDITION `M' 1980

BRASS FLAT 7/16" (11.11 MM) THICK X 1-1/8" (28.57 MM) WIDE GDE. I-COND. HB OF IS-319/1989.

BRASS FLAT 7/16" (11.11 MM) THICK X 1-1/8" (28.57 MM) WIDE GDE. I-COND. HB OF IS-319/1989.

BRASS ROD 44 MM DIA IS-319/1989 GDE-1/HB

BRASS ROD 44 MM DIA IS-319/1989 GDE-1/HB

N.M.BRASS ROD 28.00 MM IS-319/GDE-1HB(F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)HB

N.M.BRASS ROD 28.00 MM IS-319/GDE-1HB(F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)HB

BRASS ROD 22MM DIA (7/8") GDE 1, HB OF IS: 319-1989

BRASS ROD 22MM DIA (7/8") GDE 1, HB OF IS: 319-1989

NAVAL BRASS ROD 1-1/8" DIA. IS: 291-1989 (FE CONTENT NOT MORE THAN 0.05%) GD-I,HB

NAVAL BRASS ROD 1-1/8" DIA. IS: 291-1989 (FE CONTENT NOT MORE THAN 0.05%) GD-I,HB

Bending of Trail tube pt no. iwp -1947

PT NO IWP-1947

SEAMLESS BRASS TUBE 38MM O/S DIA 0.813 (21 SWG) WALLTHICKNESS SPECN. IS-407/1981 CUZN 37/HD

SEAMLESS BRASS TUBE 38MM O/S DIA 0.813 (21 SWG) WALLTHICKNESS SPECN. IS-407/1981 CUZN 37/HD

BRASS TUBE 70MM O/S DIA X 32MM I/D AS PER IS:407-1981, GRADE- CUZN37, CONDITION-HARD(HD).

BRASS TUBE 70MM O/S DIA X 32MM I/D AS PER IS:407-1981, GRADE- CUZN37, CONDITION-HARD(HD).

BRASS TUBE 45 MM O/S DIA X 34.90 MM BORE TO SPECN. IS-407/1981 GRADE-CUZN30AS, CONDITION TA.

BRASS TUBE 45 MM O/S DIA X 34.90 MM BORE TO SPECN. IS-407/1981 GRADE-CUZN30AS, CONDITION TA.

LAP STRAP ADJUSTABLE BUCKLE (For Pilot Para Mirage/Sea Harrier & Jaguar A/C)

DRG. NOo. ADRDE/1456(a) Except that :- Material for Spring : Steel Wire for Mechanic Grade-SL as per IS:4454 (Part-1) : 2001, sheet No.12 of 17.

• As per Specification/Drawing

• As per Specification/Drawing

MOUNTING RAIL for JVPC 5.56 MM DRG. NO. 0204-03-02-15-28-001-00DF

MOUNTING RAIL

DRG. NO. 0204-03-02-15-28-001-00DF

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

Steel flat 36mm x 62mm for JVPC BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B

BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B

BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B

FORGED LOWER RACE RING TO DRG.NO:675-57-277

FORGED LOWER RACE RING TO DRG.NO:675-57-277

675-57-277

765-33-128 / 129

765-33-128 / 129

ANGLE PIECE SHEET TO DRG. 765-50-2522-01

ANGLE PIECE SHEET TO DRG. 765-50-2522-01

ALUMINIUM FORGING "BODY" TO DRG NO: ADY3-008

AS PER DRAWING NO. ADY3-008

ADY3-008

CONVERSION OF BILLETS INTO HEAD FORGINGS TO DRG NO. 675-58-223. MATERIAL PROVIDED ALUMINUM BILLETS SIZE DIA 160 X 395 - 218 NO'S. WT: 4774 KGS APPROX AGAINST LF 6400019008. SUBMIT 217 NO'S OF HEAD FORGING AGAINST LF NO. 7500058007. RETURN SCRAP 1069 KGS AGIANST LF 3506692120.

AS PER DRAWING NO 675-58-223.

675-58-223

CONVERSION OF BILLETS INTO UPPER RACE RING TO DRG NO. 675-58-185. FORGING MATERIAL PROVIDED: ALUMINIUM BILLETS SIZE 240 X 623 - 11152 KGS APPROX AGAINST LF 6400019005 - 136 NO'S. SUBMIT 135 NO'S UPPER RACE RING AGAINST LF NO. 7500058006. RETURN SCRAP: 1904 KGS AGAINST LF: 3506992120.

AS PER DRAWING NO. 675-58-185

675-58-185

CONVERSION OF BILLETS INTO RINGS TO DRG:675-58-133(FORGING) (A)MATL.PROVIDED:AL.BILLETS SIZE DIA 240X353-9073kgs (APPX)GAINST LF.NO:-6400019006(211NO)(B)SUBMIT: 417Nos [RINGS AGAINST LF.NO:7500058003(C)RETURN SCRAP:1463Kg

CONVERSION OF BILLETS INTO RINGS TO DRG:675-58-133(FORGING) (A)MATL.PROVIDED:AL.BILLETS SIZE DIA 240X353-9073kgs (APPX)GAINST LF.NO:-6400019006(211NO)(B)SUBMIT: 417Nos [RINGS AGAINST LF.NO:7500058003(C)RETURN SCRAP:1463Kg

67558-133

STEEL FORGING "RING" TO DRG NO:675-50-299 IN PROOF MACHINED AND HEAT TREATED CONDITION

STEEL FORGING "RING" TO DRG NO:675-50-299 IN PROOF MACHINED AND HEAT TREATED CONDITION

675-50-299

FORGING FOR THE "BRACKET" DRG NO. 765-34-2.

FORGING FOR THE "BRACKET" DRG NO. 765-34-2.

765-34-2

FORGING FOR BRACKET TO DRAWING NO. 765-33-50-2K

AS PER DRAWING NO. 765-33-50-2K

765-33-50-25

DIE FORGING "CRANK" TO DRG NO. 765-31-50. EQUIVALENT MATERIAL: STEEL 817M40

DIE FORGING "CRANK" TO DRG NO. 765-31-50. EQUIVALENT MATERIAL: STEEL 817M40

765-31-50

765-33-57 / C

765-33-57 / C

765-33-57/C

ALUMINIUM BRONZE BUSHING TO DRG NO. 765-33-19/C IN PROOF MACHINED CONDITION AS PER DRAWING BY SPUN // CENTRIFUGAL CASTINGS METHOD. EQUIVALENT MATERIAL: GRADE AB1 TO IS: 305-81

AS PER ATTACHED DRAWING ONLY

765-33-19/C

ALUMINIUM BRONZE BUSHING TO DRG NO. 765-31-46 IN PROOF MACHINED CONDITION AS PER DRAWING BY SPUN / CENTRIFUGAL CASTING METHOD. EQUIVALENT MATERIAL: GRADE AB1 TO IS: 305-81

AS PER ATTACHED DRAWING ONLY.

765-31-46

ALUMINIUM BRONZE BUSHING TO DRAWING NO. 765-31-49, IN PROOF MACHINED CONDITION AS PER DRAWING BY SPUN / CENTRIFUGAL CASTING METHOD

AS PER ATTACHED DRAWING.

765-31-49

ALUMINIUM MANGANESE MASTER ALLOY (10% MANGANESE Fe: 0.30 MAX AND ALUM: REMINDER SHAPE & SIZE AS PER IS: 1820-1979 (INGOT WEIGHT: 5KGS.)

ALUMINIUM MANGANESE MASTER ALLOY (10% MANGANESE Fe: 0.30 MAX AND ALUM: REMINDER SHAPE & SIZE AS PER IS: 1820-1979 (INGOT WEIGHT: 5KGS.)

MANGANESE METTALIC AS PER IS 2021-1973 GR E Mn-99 (IN FORM OF MANGANESE FLAKES

MANGANESE METTALIC AS PER IS 2021-1973 GR E Mn-99 (IN FORM OF MANGANESE FLAKES

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

ALUMINIUM ALLOY PIPE DIA 16 MM X 1.5MM WT IN STD.LENGTH IN AMG6M GOST:18475-73 OR 54300-'O'CONDITION IS:738

ALUMINIUM ALLOY PIPE DIA 16 MM X 1.5MM WT IN STD.LENGTH IN AMG6M GOST:18475-73 OR 54300-'O'CONDITION IS:738

ALUMINIUM ALLOY SHEET SIZE 3MM X 1250 X 2500M. SPECN. AMG 6bM-3 GOST 21631-76 OR GRADE 54300 "O" CONDITION TO IS: 737-86 COLOUR CODE AS PER IS: 2479-1981.

ALUMINIUM ALLOY SHEET SIZE 3MM X 1250 X 2500M. SPECN. AMG 6bM-3 GOST 21631-76 OR GRADE 54300 "O" CONDITION TO IS: 737-86 COLOUR CODE AS PER IS: 2479-1981.

ALUMINIUM ALLOY SHEET SIZE 2.5MM X 1250 X 2500MM. SPECN. AMG5M 2.5 GOST 21631-76 OR EQUIVALENT MATERIAL GRADE 54300/55000 "O" CONDITION TO IS: 737-86 COLOUR CODE AS PER IS: 2479-1981

ALUMINIUM ALLOY SHEET SIZE 2.5MM X 1250 X 2500MM. SPECN. AMG5M 2.5 GOST 21631-76 OR EQUIVALENT MATERIAL GRADE 54300/55000 "O" CONDITION TO IS: 737-86 COLOUR CODE AS PER IS: 2479-1981

ALUMINIUM ALLOY SHEET TO SIZE 1.5MM X 1250MM X 2500MM. SPECN AMG6bM GOST 21631-76,OR GRADE 54300/55000 "O" CONDITION TO IS: 737-86.

ALUMINIUM ALLOY SHEET TO SIZE 1.5MM X 1250MM X 2500MM. SPECN AMG6bM GOST 21631-76,OR GRADE 54300/55000 "O" CONDITION TO IS: 737-86.

ALUMINIUM BRONZE ROUND BAR DIA. 52 MM X LENGTH 100MM MIN. AB1 TO IS:305-81

ALUMINIUM BRONZE ROUND BAR DIA. 52 MM X LENGTH 100MM MIN. AB1 TO IS:305-81

STEEL PIPE TO OUTER DIA 26 +/-0.3 X WALL THICKNESS 10 +/-0.6 MM IN STD.LENGTH OR 6000 MM, 42Cr4 Mo2 TO IS:5517-93.

STEEL PIPE TO OUTER DIA 26 +/-0.3 X WALL THICKNESS 10 +/-0.6 MM IN STD.LENGTH OR 6000 MM, 42Cr4 Mo2 TO IS:5517-93.

STEEL SHEET 2.5X1000X2000MM , 12 Cr13, Finish No.1,IS:6911 (annealed)

STEEL SHEET 2.5X1000X2000MM , 12 Cr13, Finish No.1,IS:6911 (annealed)

STEEL SHEET 2.5 X 1000 X 2000 MM,GRADE: Fe490 TO IS:1079-88.

STEEL SHEET 2.5 X 1000 X 2000 MM,GRADE: Fe490 TO IS:1079-88.

TYPICAL PATTERN WAX AS PER SPECIFICATIONS ENCLOSED

TYPICAL PATTERN WAX AS PER SPECIFICATIONS ENCLOSED

ESTER CURED ALKALINE PHENOLIC RESIN (TWO PART NO-BAKE) FOR MANUFACTURE OF MOULDS AND CORES FOR LOW ALLOY AND MANGANESE STEEL CASTINGS AS PER SPECIFICATIONS ENCLOSED.

AS PER SPECIFICATIONS ENCLOSED

HARDENER FOR ESTER CURED ALKALINE PHENOLIC RESIN (TWO PART NO-BAKE) FOR MANUFACTURE OF MOULDS AND CORES FOR LOW ALLOY AND MANGANESE STEEL CASTINGS AS PER SPECIFICATIONS ENCLOSED.

SPECIFICATIONS ENCLOSED

CARBON-DIOXIDE CURED RESIN AS PER ENCLOSED SPECIFICATIONS. (SUPPLIES ALONG WITH CHEMICAL DATA SHEET)

CARBON-DIOXIDE CURED RESIN AS PER ENCLOSED SPECIFICATIONS. (SUPPLIES ALONG WITH CHEMICAL DATA SHEET)

SILICIC ACID SOLUTION.SiO2 - 30+1%, Na2O3 - MAX: 0.35%, Fe2O3 - MAX: 0.02%, R2O3 - MAX 0.2%. DENSITY - 1.2, PH - 9.2 TO 10. IN A 40 / 60 KGS CONTAINER OF HDPE CARBOUYS. (SUPPLIES ALONG WITH CHEMICAL DATA SHEET).

SILICIC ACID SOLUTION.SiO2 - 30+1%, Na2O3 - MAX: 0.35%, Fe2O3 - MAX: 0.02%, R2O3 - MAX 0.2%. DENSITY - 1.2, PH - 9.2 TO 10. IN A 40 / 60 KGS CONTAINER OF HDPE CARBOUYS. (SUPPLIES ALONG WITH CHEMICAL DATA SHEET).

CERAMOL 256 IP (SUPPLIES ALONG WITH CHEMICAL DATA SHEET)

CERAMOL 256 IP (SUPPLIES ALONG WITH CHEMICAL DATA SHEET)

LEAD ALLOY GRADE: 4NOCCY (POSSU) 18-2 GOST: 21930-76. COMPOSITION: TIN: 1.8 TO 2.3, CADMIUM: 17.5 TO 18.5. LEAD: REST.

LEAD ALLOY GRADE: 4NOCCY (POSSU) 18-2 GOST: 21930-76. COMPOSITION: TIN: 1.8 TO 2.3, CADMIUM: 17.5 TO 18.5. LEAD: REST.

AIR PRESSURE CONTROL UNIT 765 78 CD533

AIR PRESSURE CONTROL UNIT 765 78 CD533

COPPER SHEET 4.5 MM THICKNESS X 1250 X 2500 MM AS PER GRADE AHM4.5M1, GOST: 495-77 OR IS: 1972.

COPPER SHEET 4.5 MM THICKNESS X 1250 X 2500 MM AS PER GRADE AHM4.5M1, GOST: 495-77 OR IS: 1972.

COVERAL GR. 2516 (E). SUPPLIES ALONG WITH CHEMICAL DATA SHEET.

COVERAL GR. 2516 (E). SUPPLIES ALONG WITH CHEMICAL DATA SHEET.

MULTI SPECTRAL CAMOUFLAGE EQUIPMENT TO ART.NO.1155287D COMPRISING OF FOLLOWING ITEMS:-(1)MSCN"PARASOL" OF DIA 2.2m (OUTSIDE GREEN PRINTED),QTY-10NOS(2)MSCN PARASOL OF DIA 2.2m (OUTSIDE DESERT PRINTED),QTY-10 NOS.(3)MSCN SCREEN(REVERSIBL E)OF SIZE 7mX7m,QTY-04 NOS.(4)PARASOL FOOT(GROUND POLE ), QTY-05 NOS.(5)EXTENSION TUBE,QTY-05 NOS.(6)SUPPORT POLE ASSY 3m HEIGHT(TELESCOPIC),QTY-06 NOS.(7)GROUND PEGS,QTY-10 NOS. (8)BAG FOR MSCN PARASOL,QTY-20 NOS.(9)BAG FOR MSCN SCREENS (REVERSIBLE),QTY-01 NOS.(AS PER DOC.NO.GCF/50/40259.

MULTI SPECTRAL CAMOUFLAGE EQUIPMENT TO ART.NO.1155287D COMPRISING OF FOLLOWING ITEMS:-(1)MSCN"PARASOL" OF DIA 2.2m (OUTSIDE GREEN PRINTED),QTY-10NOS(2)MSCN PARASOL OF DIA 2.2m (OUTSIDE DESERT PRINTED),QTY-10 NOS.(3)MSCN SCREEN(REVERSIBL E)OF SIZE 7mX7m,QTY-04 NOS.(4)PARASOL FOOT(GROUND POLE ), QTY-05 NOS.(5)EXTENSION TUBE,QTY-05 NOS.(6)SUPPORT POLE ASSY 3m HEIGHT(TELESCOPIC),QTY-06 NOS.(7)GROUND PEGS,QTY-10 NOS. (8)BAG FOR MSCN PARASOL,QTY-20 NOS.(9)BAG FOR MSCN SCREENS (REVERSIBLE),QTY-01 NOS.(AS PER DOC.NO.GCF/50/40259.

ART.NO.1155287D

H.T.BRASS INGOTS TO SPCN. IS-304 1981 GRADE-3

H.T.BRASS INGOTS TO SPCN. IS-304 1981 GRADE-3

BRASS INGOTS IS:1264-1997, GRADE-DCB1

BRASS INGOTS IS:1264-1997, GRADE-DCB1