OFB Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

14881

OPF/ADVANCE VR/EOI/JANUARY-19/FABRIC-01

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity
FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE U/D 95 CM. Description FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE U/D 95 CM Specification SPECN. NO. : ADRDE/SPECN/1983/14 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101211947	30 Metre
FABRIC COTTON GREY MERCERISED WIDTH 94 CM Description FABRIC COTTON GREY MERCERISED WIDTH 94 CM Specification AS PER PARTICULAR =WIDTH=94 CM A.P.35+_5 Cuft/Sqft/Sec at 10"WHP Weight/Sq.Metre=115-117 Gram Thread /cm-Warp-28,WEft-25 Tex of Yarn Tex x Fold-Warp-9.4x2,Weft-9.5x2 B.S.in Kg-Warp-53kg(min) Weft-53kg(min.) Weave-Plain Finish-Grey Merecerised Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221967	5963 Metre
FABRIC COTTON SCOURED 68 GM UNDYED Description FABRIC COTTON SCOURED 68 GM UNDYED Specification SPECN NO. CIADE/19(a). Drawing no. Manufacturing Technology As per Specification/drawing CIADE_19a.pdf Testing / Inspection Facility As per Specification/drawing CIADE_19a.pdf	2101221972	125 Metre
FABRIC RAYON ORANGE 107 CM Description FABRIC RAYON ORANGE 107 CM Specification SPECN-ADRDE/SPECN/1983/16 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221971	1275 Metre
FABRIC NYLON 180 GM 94 CM U/D Description FABRIC NYLON 180 GM 94 CM U/D Specification 1- LENGTH/ROLL -------- 100 M-----------------IS:1954 2-MASS/SQ.MTR.GM.------180+ -3----------------IS:1964 3-WIDTH CM(MIN) ------94 -----------------IS:1954 4-AIR POROSITY(CU.FT./SQ.FT/SEC)---3-6--------IS:4726 5-BREAKING LOAD KGF MIN.WARP-------230--------IS:1969 WEFT-------220--------IS:1969 6-THICKNESS,MM(UNDER /CM SQ.PRESSURE)----0.32 MAX 7-NO.OF THREADS/CM WARP---24/25 & WEFT---22/23--IS:1963 8-TEX OF YARN, WARP---17.5 X 2 &WEFT---17.5 X 2--IS:3442 9-% ELONGATION--------25 MIN.------------------IS:1969 10-WEAVE ----------VISUAL Drawing no. Manufacturing Technology Testing / Inspection Facility	2101211951	142 Metre
FABRIC NYLON 52 GMS UNDYED 91.4 CMS. Description FABRIC NYLON 52 GMS UNDYED 91.4 CMS. Specification SPECIFICATON NO.:-ADRDE/SPECN/1988/32 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221109	46478 Metre
FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM. Description FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM Specification SPECIFICATION:- ADRDE/SPECN/2002/56(b)(VARIETY NO.-1) Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221969	4968 Metre
FAB.NYL.66,93 GM.U/DWIDTH 101+-1 CM.(EXCLUDING SELVEDGE) Description FAB.NYL.66,93 GM.U/DWIDTH 101+-1 CM.(EXCLUDING SELVEDGE) Specification SPECN-ADRDE/SPECN/2000/53(b) Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221320	1069 Metre
FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS. Description FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS. Specification SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221592	6124 Metre
FABRIC NYLON 185 GM UNDYED 92 CM . Description FABRIC NYLON 185 GM UNDYED 92 CM . Specification SPECIFICATION NO.: ADRDE/SPECN/1993/43 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101211985	719 Metre
FABRIC NYLON 105 GM UNDYED 110 CM. Description FABRIC NYLON 105 GM UNDYED 110 CM Specification SPECIFICATION NO. : ADRDE/SPECN/1993/42 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101212105	7207 Metre
CANVAS NYLON 220 GM. 91.4 CMS. UNDYED Description CANVAS NYLON 220 GM. 91.4 CMS. UNDYED Specification SPECIFICATION NO.: JSS 8305 - 38 : 2015 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101099890	433 Metre
FABRIC NYLON FOR PARACHUTES TYPE SM 91.4 cms. Description FABRIC NYLON FOR PARACHUTES TYPE SM 91.4 cms. Specification SPECIFICATION NO.: ADRDE/QMS/TDTM/SPECN/97 Drawing no. Manufacturing Technology Testing / Inspection Facility	2103216031	1819 Metre
FABRIC COTTON CLOSELY WOVEN 235 GMS O.G. 91.4 CMS. Description FABRIC COTTON CLOSELY WOVEN 235 GMS O.G. 91.4 CMS. Specification SPECIFICATION NO. : JSS-8305-5 (V.NO.B). Drawing no. Manufacturing Technology Testing / Inspection Facility	2101211552	894 Metre
FABRIC NYLON ORANGE 37 GM 94 cm WIDTH Description FABRIC NYLON ORANGE 37 GM 94 cm WIDTH Specification SPECN NO.IS:4726-1984 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221988	2 Metre
FABRIC NYLON 93GM UD WIDTH 95 CM Description FABRIC NYLON 93GM U/D WIDTH 95 CM Specification ADRDE/SPECN/2000/53(c) Drawing no. Manufacturing Technology As Per Specification/Drawing ADRDE_SPECN_2000_53(c).pdf Testing / Inspection Facility As Per Specification/Drawing ADRDE_SPECN_2000_53(c).pdf	2101221989	281 Metre
COTTON PADDING 37 CM x 1.5 MM THICK Description COTTON PADDING 37 CM x 1.5 MM THICK Specification SPECIFICATION NO. : AS PER APPROVED SAMPLE. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101099937	658 Metre
COTTON CANVAS 545 GR. O.G. 91.4 CM UNPROOFED VARIETY NO.3 Description COTTON CANVAS 545 GR. O.G. 91.4 CM UNPROOFED VARIETY NO.3 Specification SPCN. IS:1424-1970. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101126248	1564 Metre
CANVAS NYLON 220g 91.4 cm OG Description CANVAS NYLON 220g 91.4 cm OG Specification SPCN: IND/ADE/0065(a). Drawing no. Manufacturing Technology Testing / Inspection Facility	2101092886	4764 Metre
FABRIC NYLON 58g ORANGE Description FABRIC NYLON 58g ORANGE Specification SPECN NO.:CIT&C/TC-8/99 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221101	46 Metre
FABRIC NYLON 109g U/D 91.4cm Description FABRIC NYLON 109g U/D 91.4cm Specification SPECN. NO.: ADRDE/SPECN/1985/28(c). Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221160	22726 Metre
DUCK COTTON 475 GMS O.G. UNPROOFED 91.4 CMS FOR AERONAUTICAL PURPOSE Description DUCK COTTON 475 GMS O.G. UNPROOFED 91.4 CMS FOR AERONAUTICAL PURPOSE Specification SPECIFICATION NO. : IS : 1422-1983. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101138459	17775 Metre
Cloth Cotton Closely Woven 170 Grams Scoured 91point4 Cms Variety No A Description Cloth Cotton Closely Woven 170 Grams Scoured 91.4 Cms, (Variety No. A) Specification Specn. No. : JSS-8305-05:2020 (Fourth Revision) (a) Sampling Plan & Criteria for conformity as per CQAT&C/QA1/TC-11/12. Drawing no. Manufacturing Technology As per Specification/Drawing jss_8305-05_2020_fouth_revision.pdf Testing / Inspection Facility As per Specification/Drawing jss_8305-05_2020_fouth_revision.pdf	2101211560	11264 Metre
FABRIC NYLON 66 93g Undyed 120 Cm Description FABRIC NYLON 66, 93g U/D 120 Cm. Specification ADRDE/SPECN/2000/53(c) Drawing no. Manufacturing Technology As per Drawing / Specification Fabric_Nylon_93_gsm_Undyed_Dyed_ADRDE_SPECN_2000_53(c).pdf Testing / Inspection Facility As per Drawing / Specification Fabric_Nylon_93_gsm_Undyed_Dyed_ADRDE_SPECN_2000_53(c).pdf	2101221251	85212 Metre
FABRIC NY. 109GM ORANGE 120 CM WIDTH Description FABRIC NY. 109GM ORANGE 120 CM WIDTH Specification SPECIFICATION NO.:ADRDE/SPECN/1985/28(C) SHADENO. 592 AS PER BS: 381-1964 AS. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221348	2393 Metre
FABRIC COTTON MERCERISED 140 G U/D 136_+4CM. Description FABRIC COTTON MERCERISED 140 G U/D 136_+4CM. Specification SPECN. NO. IS:514.GRADE -1. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221983	3912 Metre
FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE ORANGE 94 CM Description FABRIC NYLON LOW POROSITY 52 GM,RIP STOP WEAVE ORANGE 94 CM Specification SECIFICATION NO. : ADRDE/SPECN/1983/14 (a) Drawing no. Manufacturing Technology As per Specification/Drawing ADRDE_SPECN_1983_14_a.pdf Testing / Inspection Facility As per Specification/Drawing ADRDE_SPECN_1983_14_a.pdf	2101211903	12496 Metre
FABRIC NYLON LT WT 37g RIP STOP WEAVE OLIVE DRAB SHADE NO 298 AS PER SPECN NO IS 5 1994 94 CM WIDTH Description FABRIC NYLON LT. WT. 37g RIP STOP WEAVE OLIVE DRAB. SHADE NO 298 (AS PER SPECN. NO IS:5-1994), 94 CM. WIDTH Specification SPECIFICATION NO. IS:4726-1984. EXCEPT THAT:- i) page 4, clause 2.2.1, third line has been deleted from IS. ii) page 7, table 1, note 2 has been amended as given FOR:- 210 g/sq.cm READ:- 200 g/sq.cm Drawing no. Manufacturing Technology As per Specification/drawing IS_4726-1984.pdf Testing / Inspection Facility As per Specification/drawing 4726_1984.pdf	2101221982	357784 Metre
NETTING NYLON 3" SQUARE MESH Description NETTING NYLON 3" SQUARE MESH Specification SPECN. :AS PER PARTICULARS Width: 37.5 cm (15 Inch). B.L. : 20 kg(MIN). Mesh Size : 7.5cm x7.5cm (3"SQUARE). Strength at joint : 30 kg(Min). Denier : 840. Weight/Mtr.:- Upto 25 grams. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101533179	76485 Metre
Net Fabric Polyester 76 gsm 20 kgf BS Description Net Fabric Polyester 76 Gms. 20 Kgf BS For Width 120 cms +2 -0 cm excluding selvedge Specification SPEC NO. ADRDE/QMS/TDTM/F/2009/03(a), DT. 17-05-2021. ADRDE_QMS_TDTM_F_2009_03.pdf Drawing no. Manufacturing Technology As per Specification/Drawing Specn-_ADRDE_QMS_TDTM_F_2009_03(a)_(1).pdf Testing / Inspection Facility As per Specification/Drawing Specn-_ADRDE_QMS_TDTM_F_2009_03(a)_(1).pdf	2110069084	22063 Metre
DUCK NYLON 230 GM OG 91point4 CM Description DUCK NYLON 230 GM O.G. 91.4 CMS. Specification ADRDE/SPECN/1984/23(d). ADRDE_specn_1984_23_d.pdf Drawing no. Manufacturing Technology As per Specification/Drawing ADRDE_specn_1984_23_d.pdf Testing / Inspection Facility As per Specification/Drawing ADRDE_specn_1984_23_d.pdf	2101138892	17467 Metre
FABRIC NYLON 370 gm AIR TEXTURE DISRUPTIVE PRINTED PU COATED INSIDE AS PER PARTICULARS Description FABRIC NYLON 370 gm. AIR TEXTURE, DISRUPTIVE PRINTED, PU COATED INSIDE AS PER PARTICULARS Specification SPECN-ADRDE/specn/75(a) & SHADE AS PER SAMPLE RECEIVED FROM ADRDE VIDE LETTER NO. ADRDE/QMS/PG/PAS/CFF/319/P dtd.06-06-12 Drawing no. Manufacturing Technology As per Specification/drawing adrde_specn_75a.pdf Testing / Inspection Facility As per Specification/drawing adrde_specn_75a.pdf	2101221226	10484 Metre
FABRIC COTTON CW 310g OG 91.4 CM. Description FABRIC COTTON CW 310g OG 91.4 CM. Specification JSS: 8305-05 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101211938	7261 Metre
FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS Description FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS SPECN NO ADRDE/SPECN/1983/14-OPF KANPUR Specification SPECN NO ADRDE/SPECN/1983/14 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221979	234295 Metre
FABRIC NYLON LT WT 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 AS PER IS SPECN NO IS 5 1994 122 CM WIDTH Description FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH Specification SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2 Read-200 g/cm2 Drawing no. Manufacturing Technology As Per Specification/Drawing IS_4726-1984.pdf Testing / Inspection Facility As Per Specification/Drawing 4726_1984.pdf	2101221981	259689 Metre
FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE) Description FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE) specification Specification Specn. No. :- IS:2422-1985.Dye fastness to light may be obtained by Carbon Arc Method also in case Xenon Arc is not available. (a) In appearance shade finish and all other respects not defined in this specification,the material shall conform to the corresponding to sealed pattern held in the custody of the Controller, CQA(T&C), Kanpur. (b) Sampling Plan as per Annexure I attached. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221228	26094 Metre
BLENDED FABRIC POLYESTER & COTTON(67:33) Description BLENDED FABRIC POLYESTER & COTTON (67:33) 93+2-0 CM WIDTH Specification TYPE 2 OF IS 2970-1987 (RE AFFIRMED 2004) FIRST REVISION EXCEPT TECHNICAL PARTICULARS AS PER ANNEXURE ENCLOSED. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221310	2063317 Metre

14882

180203GLPO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
9080080629 BOX PT GP Description 9080080629 BOX PT GP DRG NO. D1/3770-000072 Specification 9080080629 BOX PT GP DRG NO. D1/3770-000072 Drawing no. DRG NO. D1/3770-000072 Manufacturing Technology Testing / Inspection Facility	90	15 Number

14883

OFMK/TM/OTE/V000431118

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
TOOLS AND ACCESSORIES 6755 93 CD 3600 KIT A Description TOOLS AND ACCESSORIES 6755 93 CD 3600 KIT A Specification TOOLS AND ACCESSORIES 6755 93 CD 3600 KIT A Drawing no. Manufacturing Technology Testing / Inspection Facility	93	12 Set

14884

OPF/ADVANCE VR/EOI/JANUARY-19/ METAL-04

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity
STIFFNER PLATE Description SPECN-ADRDE/1423 Specification SPECN-ADRDE/1423 Drawing no. ADRDE/1423 Manufacturing Technology Testing / Inspection Facility	2110036054	44 Number
DISC 155 + - 3 MM THICK 1.8 +0.2/- 0.0 MM Description SPECN-ADRDE/1.6.03.05-04-04,sheet no.8/11 Specification SPECN-ADRDE/1.6.03.05-04-04,sheet no.8/11 Drawing no. Manufacturing Technology Testing / Inspection Facility	2110036056	55 Number
COIL SPRING (I.CODE 6055) Description SPECN-ADRDE/1.6.03.05-04-04,sheet no.9/11 Specification SPECN-ADRDE/1.6.03.05-04-04,sheet no.9/11 Drawing no. Manufacturing Technology Testing / Inspection Facility	2110036055	55 Number
PIN FOR LINK 25 M Description ADRDE/1433. Specification ADRDE/1433. Drawing no. Manufacturing Technology Testing / Inspection Facility	2110029017	55 Number
PULLY FOR LINK 25 M LONG Description ADRDR/1292. Specification ADRDR/1292. Drawing no. Manufacturing Technology Testing / Inspection Facility	2110029016	55 Number
METALLIC RING Description DO/129/93, ADRDE/1293. Specification DO/129/93, ADRDE/1293. Drawing no. Manufacturing Technology Testing / Inspection Facility	2110029015	55 Number
SNAP HOOK STATIC LINE Description DRD/357/96 ADRDE/1431. Specification DRD/357/96 ADRDE/1431. Drawing no. Manufacturing Technology Testing / Inspection Facility	2110029014	55 Number
BUCKLE, ADRDE/1428 Description DRG.NO.DRD/356/96, ADRDE/1428 Specification DRG.NO.DRD/356/96, ADRDE/1428 Drawing no. Manufacturing Technology Testing / Inspection Facility	2110029013	440 Number
BUCKLE ADRDE 1429 01 Description BUCKLE ADRDE/1429-01 Specification BUCKLE A.B.C DRG.NO. ADRDE/1429-01 Drawing no. BUCKLE A.B.C DRG.NO. ADRDE/1429-01 Manufacturing Technology As Per Specification/Drawing BUCKLE_ABC_ADRDE_1429_01.pdf Testing / Inspection Facility As Per Specification/Drawing BUCKLE_ABC_ADRDE_1429_01.pdf	2110029012	4356 Number
RING DRD/395/97 Description DRG.-DRD/395/97 ADRDE/1291. Specification DRG.-DRD/395/97 ADRDE/1291. Drawing no. DRG.-DRD/395/97 ADRDE/1291. Manufacturing Technology Testing / Inspection Facility	2110029011	4576 Number
GROMMET WITH WASHER (I.CODE-9010) Description DRD/375/97 ADRDE/1432. Specification DRD/375/97 ADRDE/1432. Drawing no. Manufacturing Technology Testing / Inspection Facility	2110029010	968 Number
PIN DRD/341/96 Description ADRDE/1288. Specification ADRDE/1288. Drawing no. Manufacturing Technology Testing / Inspection Facility	2110029008	550 Number
BUCKLE WITH BAR Description BUCKLE WITH BAR Specification SPECN-DRD/332/96, ADRDE/1430. Drawing no. Manufacturing Technology As Per Specification/Drawing BUCKLE_WITH_BAR_ADRDE_1430.pdf Testing / Inspection Facility As Per Specification/Drawing BUCKLE_WITH_BAR_ADRDE_1430.pdf	2101221284	110 Number
RING (I.CODE-1283) Description SPECN-DRD/393/97,ADRDE/1290. Specification SPECN-DRD/393/97,ADRDE/1290. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221283	11627 Number
COTTER PIN Description SPECN. NO. DRD/340/96,ADRDE/1289(b) Specification SPECN. NO. DRD/340/96,ADRDE/1289(b) Drawing no. Manufacturing Technology Testing / Inspection Facility	2101126382	110 Number
COTTON FELT 6MM THICK Description SPECN-BEST TRADE QUALITY. Specification SPECN-BEST TRADE QUALITY. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101126377	80 Number
LINK SOLID FOR HARNESS Description SPECN.NO. ADRDE/1212 Specification SPECN.NO. ADRDE/1212 Drawing no. Manufacturing Technology Testing / Inspection Facility	2110069011	192 Number
HOOK SNAP HARNESS D-18 Description DRG.NO.ADRDE/7(F). Specification DRG.NO.ADRDE/7(F). Drawing no. DRG.NO.ADRDE/7(F). Manufacturing Technology Testing / Inspection Facility	2110040023	240 Number
RELEASE UNIT Description DRAWING NO. : DO/196/84 Specification DRAWING NO. : DO/196/84 Drawing no. DRAWING NO. : DO/196/84 Manufacturing Technology Testing / Inspection Facility	2110030002	48 Number
EYELET BRASS WITH WASHER 5 MM Description DRG. NO. : ADRDE/177(a). Specification DRG. NO. : ADRDE/177(a). Drawing no. DRG. NO. : ADRDE/177(a). Manufacturing Technology Testing / Inspection Facility	2110003005	1020 Number
FOAM SYNTHETIC 15 MM THICK 91.4 CMS. WIDTH Description SPECN NO. IS:7933-1975 Specification SPECN NO. IS:7933-1975 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101226191	10 Number
THIMBLE FOR 120 MM BOMB PARACHUTE Description SPECN./DRG.NO. CQA(GS)/US/381 Specification SPECN./DRG.NO. CQA(GS)/US/381 Drawing no. CQA(GS)/US/381 Manufacturing Technology Testing / Inspection Facility	2110033001	18500 Number
FIBER GLASS CORE 5 OR 6MM ( BORE SIZE ) Description SPECN-P6/101/ILLG/FGS. Specification SPECN-P6/101/ILLG/FGS. Drawing no. Manufacturing Technology Testing / Inspection Facility	2110037002	38473 Number
FIBER GLASS TAPE 60MM U/D Description SPECN- ADRDE/SPECN/1998/51. Specification SPECN- ADRDE/SPECN/1998/51. Drawing no. Manufacturing Technology Testing / Inspection Facility	2110037001	5194 Number
CAT PART NO 4010 002764 WIRE ROPE FOR PARACHUTE SYSTEM FOR CARLGUSTAF 84mm ILLUMINATING AMMUNITION Description CAT PART NO. 4010-002764 WIRE ROPE FOR PARACHUTE SYSTEM FOR CARLGUSTAF 84mm ILLUMINATING AMMUNITION Specification SPECN: IND/GS/1887. Drawing no. IND/GS/1887 WIRE_ROPE_IND_GS_1887_DRAWING.pdf Manufacturing Technology As per Specification/drawing WIRE_ROPE_IND_GS_1887_DRAWING.pdf Testing / Inspection Facility As per Specification/drawing WIRE_ROPE_IND_GS_1887_DRAWING.pdf	2110032003	63525 Number
STEEL RING Description SPECN. NO. IND/GS/1871. Specification SPECN. NO. IND/GS/1871. Drawing no. IND/GS/1871. Manufacturing Technology Testing / Inspection Facility	2110032000	63525 Number
THIMBLE FOR PARACHUTE SYSTEM FOR MORTAR BOMB 81mm ILLUMINATING MK-II VERSION Description DRG. NO. ADRDE/1113(a) Specification DRG. NO. ADRDE/1113(a) Drawing no. DRG. NO. ADRDE/1113(a) Manufacturing Technology Testing / Inspection Facility	2110052003	72512 Number
PARACHUTE SYSTEM FOR BOMB 51 ILLUMINATING AMMUNITION (THIMBLE) Description DRAWING NO. : ADRDE/553-A-1(a). Specification DRAWING NO. : ADRDE/553-A-1(a). Drawing no. DRAWING NO. : ADRDE/553-A-1(a). Manufacturing Technology Testing / Inspection Facility	2110057001	73680 Number
PRU-SLEEVE Description SPECN-ADRDE/1245 Specification SPECN-ADRDE/1245 Drawing no. Manufacturing Technology Testing / Inspection Facility	2111659014	103 Number
BUCKLE "D"SHAPED FOR PTR-M Description SPECN-ADRDE/1230(c) Specification SPECN-ADRDE/1230(c) Drawing no. Manufacturing Technology Testing / Inspection Facility	2110005012	412 Number
LACING 'D' RING Description SPECN./DRG. NO. ADRDE/1229(d). Specification SPECN./DRG. NO. ADRDE/1229(d). Drawing no. Manufacturing Technology Testing / Inspection Facility	2110005013	824 Number
MILLED STEEL WIRE GALVANISED 0.710 MM (22-MWG) Description SPECN NO. IS:280-1962 Specification SPECN NO. IS:280-1962 Drawing no. Manufacturing Technology Testing / Inspection Facility	2110072000	900 Number
TRINGULAR D RING Description SPECN-ARM 1350 B 3 Specification SPECN-ARM 1350 B 3 Drawing no. Manufacturing Technology Testing / Inspection Facility	2110072001	450 Number
SPREADER BAR SECONDARY Description DWG.NO. ARM 1350 B 11 Specification DWG.NO. ARM 1350 B 11 Drawing no. Manufacturing Technology Testing / Inspection Facility	0619058514	1125 Number
SPEADER BAR PRIMARY (ASSY) Description SPECN-ARM-1350-B4 Specification SPECN-ARM-1350-B4 Drawing no. Manufacturing Technology Testing / Inspection Facility	2110070001	450 Number
DISC GLASS EPOXY DIA 155 MM THICK 1.8 +0.2 -00MM. Description SPECN. NO.BEST TRADE QUALITY. Specification SPECN. NO.BEST TRADE QUALITY. Drawing no. Manufacturing Technology Testing / Inspection Facility	2510073715	400 Number
CORD BOARD SHEET 2MM THICK SIZE 65MMX50MM Description SPECN.NO. BEST TRADE QUALITY. Specification SPECN.NO. BEST TRADE QUALITY. Drawing no. Manufacturing Technology Testing / Inspection Facility	2510073714	12 Number
COIL SPRING (FOR TAIL UNIT) Description SPECN NO.ADRDE/1159-A-1/SA-8-5 Specification SPECN NO.ADRDE/1159-A-1/SA-8-5 Drawing no. ADRDE/1159-A-1/SA-8-5 Manufacturing Technology Testing / Inspection Facility	2101069002	400 Number
PULLY Description SPECN. NO. ADRDE/1159-A-2/SA-6 Specification SPECN. NO. ADRDE/1159-A-2/SA-6 Drawing no. ADRDE/1159-A-2/SA-6 Manufacturing Technology Testing / Inspection Facility	2101069001	400 Number
ADHESIVE SOLUTION POLYUTHERINE Description SPECN. BEST TRADE QUALITY. Specification SPECN. BEST TRADE QUALITY. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101010011	160 Number
RUBBER WEDGE (I.CODE-2180) Description SPECN. NO. ADRDE/1159-A-2/SA-7 Specification SPECN. NO. ADRDE/1159-A-2/SA-7 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101682180	400 Number

Proceed