WEBBING NYLON 102 MM UNDYED

SPECIFICATION:ADD/MAT/1

WEBBING COTTON SPECIAL LIGHT 44MM O.G. SPCN NO:- JSS:8305-8. SAMPLING PLAN & CRITERIA FOR CONFORMITY AS PER ANNEXURE ATTACHED

SPCN NO:- JSS:8305-8. SAMPLING PLAN & CRITERIA FOR CONFORMITY AS PER ANNEXURE ATTACHED

IS : 4727-1968

Specification No.: IS : 4727-1968. SAMPLING PLAN AS PER ANNEXURE III ATTACHED.

WEBBING NYLON 25.4 MM UNDYED SPECN NO :ADRDE/SPECN/1983/11(b)

SPECN NO :ADRDE/SPECN/1983/11(b)

WEBBING NYLON 44 MM, OG.BS-1815 KG F RESIN TREATED

SPECIFICATION NO: ADRDE/TECH PART/02/36(b).

WEBBING NYLON 85mm OG

SPECN NO AS PER PARTICULAR. WIDTH IN MM :-------------= 85 +(-)1.0 THICKNESS IN MM ) AT 200 gm/cm Sqr.PRESSURE)= 2.0/2.1 MASS/MTR.IN Gms.----------=158.00 (Max). PICKS PER dm--------------=196 B.S. IN NEWTON------------=51686 (MIN.)

WEBBING NYLON 13MM (BS=460KG). IS: 9267-1979

IS: 9267-1979

WEBBING NYLON 44 MM 2950 KG STEEL GREY

SPECN. IS:4727-1968 Type -1 Except that :- 1) 180 picks/dm +/- 5% (2 picks/shed) 2) No. of folds in weft yarn-1

• As Per Specification/Drawing

• As Per Specification/Drawing

WEBBING NYLON 44 MM 1815 KG STEEL GREY

SPECN NO. IS : 4727- 2020 Type 2 with amendment No. 1 August 2022

• As Per Specification/Drawing

• As Per Specification/Drawing

WEBBING NYLON 44 MM 1000 KG STEEL GREY SPECN-NO:-CIADE/35 (b)

SPECN-NO:-CIADE/35 (b)

WEBBING NYLON 43 MM UNDYED BS 4800 KG

ADRDE/SPECN/1993/44(a)

• As per Specification/Drawing

• As per Specification/Drawing

WEBBING NYLON 51 MM UNDYED BS=480 KGS.

SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.

WEBBING NYLON 25.5 mm UNDYED SPECIFICATION NO. : ADRDE/SPECN/1983/11(b) 50 mtr. for Roll Length Excluding sampling

SPECIFICATION NO. : ADRDE/SPECN/1983/11(b) 50 mtr. for Roll Length Excluding sampling

WEBBING NYLON TUBULAR 14 MM UNDYED (BS 680 KG). SPECIFICATION NO.: ADRDE/SPECN/1983/11(a).

SPECIFICATION NO.: ADRDE/SPECN/1983/11(a).

WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG). SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.

SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.

WEBBING NYLON 44mm 9807N U/D SPECN: CIADE/35 (b)

SPECN: CIADE/35 (b)

WEBBING NYLON 44mm 1000kg OG SPECN. NO. CIADE/35 (b)

SPECN. NO. CIADE/35 (b)

WEBBING NYLON 44mm 1000kg OG ADRDE/QMS/TDTM/SPECN/99

ADRDE/QMS/TDTM/SPECN/99

WEBBING NYLON 44 MM O.G. 2950 KG

SPECIFICATION NO.: IS:4727-1968. Type-1 Except that:- 1. 180 picks/dm +/- 5% (2 picks/shed) 2. No. of folds in weft yarn - 1.

• As Per Specification/Drawing

• As Per Specification/Drawing

WEBBING COTTON SPL. 76 MM OG for PP SPECIFICATION NO.(1) JSS-8305-8. (2) SPCN.NO.IND/ADE/0085(f) SAMPLING PLAN & CRITERIA OF CONFORMITY AS PER ANNEXURE I ATTACHED.

SPECIFICATION NO.(1) JSS-8305-8. (2) SPCN.NO.IND/ADE/0085(f) SAMPLING PLAN & CRITERIA OF CONFORMITY AS PER ANNEXURE I ATTACHED

WEBBING NYLON 44 MM O.G. 1815 KG. SPCN.NO. IS:4727 LATEST.

SPCN.NO. IS:4727 LATEST.

THREAD SEWING NYLON 66 BONDED 4.5 kgf MIN. SPECN-M/S MADURA COATS/MS/VARDHMAN THREAD BRAND

SPECN-M/S MADURA COATS/MS/VARDHMAN THREAD BRAND

THREAD COTTON 36 S/27 ( 165 D TEX X 27 ) SPECN-IS:1376

SPECN-IS:1376

THREAD COTTON BL:5 KG OG

SPECN- IS:1376-1998

• As per Drawing/Specification

• As per Drawing/Specification

THREAD SEWING COTTON U/D FOR BASTING BS=9.8N IS:1376-1979

IS:1376-1979

THREAD LOCKING COTTON BL-50N U/D SPECN.NO:-ADRDE/SPECN/1992/39

SPECN.NO:-ADRDE/SPECN/1992/39

THREAD SEWING NYLON 20-N(V.NO.L-1) OG SPECN. NO. IS:4229-1978(V.NO.L-1)

SPECN. NO. IS:4229-1978(V.NO.L-1)

NYLON SEWING THREAD V. NO. H-2 SPECN. NO. IS:4229-1992.

SPECN. NO. IS:4229-1992.

THREAD SEWING COTTON 165 D TEX/6 OG SPECN-IS:1376-1998 (LATEST VERSION)

SPECN-IS:1376-1998 (LATEST VERSION)

THREAD SEWING NYLON V. NO. H2 106N U/D SPECIFICATION NO. IS:4229-1992

SPECIFICATION NO. IS:4229-1992

NYLON SEWING THREAD VARIETY "66" BONDED TICKET NO.40,OG MIN. BS:4.9 Kgf. Specn-MADURA COATS/VARDMAN MAKE.

Specn-MADURA COATS/VARDMAN MAKE.

NYLON SEWING THREAD LIGHT UNDYED (BL 20 N) FOR A.P.

Specn.No.: IS ; 4229-78 with amendment No.1 of April'1983 except that

THREAD SEWING COTTON 27/365 U/D SPCN.NO.IS:1720-1978.

SPCN.NO.IS:1720-1978.

THREAD SEWING COTTON 27/36 S U/D V. NO. 42 SPECN-IS:1720-1978.

SPECN-IS:1720-1978.

THREAD SEWING COTTON 21 TEX/2 U/D V.NO. 2 SPECN-IS:1720-1978.

SPECN-IS:1720-1978.

THREAD SEWING NYLON LIGHT OG VARIETY NO. L- 2. 3 STAND OG (BL-35N(MIN)) SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

THREAD SEWING COTTON 165d TEX/27 OG.V NO 13

SPCN.IS:1376-1998.

• As per Specification/drawing

• As per Specification/drawing

THREAD SEWING NYLON OG 220 N SPCN. IS: 4229-1978.(V.NO.H5).

SPCN. IS: 4229-1978.(V.NO.H5).

THREAD SEWING NYLON BL-106 N O.G. SPECIFICATION NO. IS:4229-1992 V.NO.H-2.

SPECIFICATION NO. IS:4229-1992 V.NO.H-2.

THREAD SEWING COTTON 165d TEX/27 OG.V NO 13

SPCN.IS:1376-1998.

• As per Specification/drawing

• As per Specification/drawing

LINEN SEWING THREAD 92 TEX X 8 ( Variety No.L-3) FOR AEROSPACE PURPOSES

SPECIFICATION NO. : IS : 2196-1985 (Variety No.3)

THREAD SEWING NYLON '66' Bonded BS: 4.5 Kgf. Navy Blue

Spec.No.ADRDE/TDTM/TH/2009/1(c) Dtd:-20.05.21, Shade No. 106 AS PER IS-5-1994 THE THREAD SHOULD BE BONDED THREAD

• As per Specification

• As per Specification

THREAD COTTON 5 KG U/D

SPECN. IS: 1376-1998 ( V.NO.-9)

• As per Specification/Drawing

• As per Specification/Drawing

THREAD SEWING NYLON SUPER HEAVY OG (BL-211 N)

SPECN NO. IS:4229-1992(V.NO.H-4)

THREAD SEWING NYLON SUPER HY.U/D(BL-211N) V.NO. H4

SPECN NO. IS:4229-1992 (V.N. H 4)

THREAD SEWING NYLON UNDYED V.NO. L-2 35-N

SPECN. NO.IS: 4229-1992, AMDT-1 RA 2008

Thread Sewing Nylon 66 Light Yellow BS 4.5 KGF, Bonded

SPECN-ADRDE/TDTM/TH/2009/1(c) Dated:- 20.05.2021, The thread should be bonded thread.

• As Per Specification/Drawing

• As Per Specification/Drawing

COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)

SPECN. NO.: IS : 1376-1998 Except that :- i)In appearance Finish and other respects not defined in this Specn. the material shall conform to the corresponding sealed pattern held in the custody of the Controller, CQAT&C Kanpur. (ii) Sampling Plan & Criteria of conformity As per CQAT&C/QAI/TC-8/13. (III) ph Value should be 6.0 to 8.5 PACKING & MARKING : AS PER SCHEDULE NO. CQAT&C/PMS/36(a).

SEWING THREAD SPUN POLYESTER OG

SPECN NO:IND/TC/0296(b)EXCEPT FORLENGTH/KG (min)(m)-12800, COUNT OF YARN 250 DTEX X3. BREAKING LOAD (MIN)-(50 CM. BETWEEN GRIPS)-23000 MN.FINAL TWIST IS Z PACKING & MARKING : AS PER SCHEDULE NO.CQAT&C/PMS/36(a)

• As Per Specification/Drawing

• As Per Specification/Drawing

AS PER TE

AS PER TE

TEAR TAPE NYLON 44 MM,10000 N(TEARING STRENGTH=340-640 N)

ADRDE/SPECN/1980/4(b)

ADRDE/SPECN/1980/4(b)

• As Per Specification/Drawing

• As Per Specification/Drawing

ADRDE/1984/24

ADRDE/1984/24

TAPE NYLON 26 MM THIN 200 KG O.G.

ADDE/BP/1(B) WITH 20-30% ELONGATION & PROPER HEAT SETTING

• As per Specification/Drawing

• As per Specification/Drawing

SPECN-ADRDE/SPECN/1993/44

SPECN-ADRDE/SPECN/1993/44

ADRDE/1985/27 (b) with proper heat setting

ADRDE/1985/27 (b) with proper heat setting

ADRDE/1992/38 20-30% ELO.WITH PROPER HEAT SETTING

ADRDE/1992/38 20-30% ELO.WITH PROPER HEAT SETTING

ADRDE/1983/13

ADRDE/1983/13

ADDE/BP/1(b)with 20-30% elongation & proper heat setting.

ADDE/BP/1(b)with 20-30% elongation & proper heat setting.

ADDE/BP/1(b) with 20-30 % elongation & proper heat setting

ADDE/BP/1(b) with 20-30 % elongation & proper heat setting

ADDE/BP/1(b)with 20-30% elongation & proper heat setting

ADDE/BP/1(b)with 20-30% elongation & proper heat setting

ADDE/BP/1(b)with 20-30% elongation & proper heat setting

ADDE/BP/1(b)with 20-30% elongation & proper heat setting

ADDE/BP/1(b) with 20-30 % elongation & proper heat setting

ADDE/BP/1(b) with 20-30 % elongation & proper heat setting

TAPE NYLON 26 MM THIN 200 KG Undyed

ADDE/BP/1(b) with 20-30% elongation & proper heat setting

• As per Specification/drawing

• As per Specification/drawing

ADDE/BP/1(b)WITH 20-30% ELONGATION & PROPER HEAT SETTING.

ADDE/BP/1(b)WITH 20-30% ELONGATION & PROPER HEAT SETTING.

TAPE NYLON 26 MM 2150 kgf

Specn. No.- ADRDE/SPECN/70(b), variety No. 1 Page No. 15 of 25 as per No. ADRDE/QMS/TDTM/SPECN/85.

• As per Specn/Drg

• As per Specn/Drg

TAPE TUBULAR NYL 18 MM BS 700 KG U/D

ADRDE/SPECN/1992/38 (b)

• As per Specification/Drawing

• As per Specification/Drawing

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

specn.no:-ADRDE/QMS/TDTM/SPECN/93

specn.no:-ADRDE/QMS/TDTM/SPECN/93

ADRDE/1984/24

ADRDE/1984/24

ADDE/BP/1(b)WITH 20-30 % ELONGATION & PROPER HEAT SETTING.

ADDE/BP/1(b)WITH 20-30 % ELONGATION & PROPER HEAT SETTING.

ADRDE/1985/27(a) WITH PROPER HEAT SETTING

ADRDE/1985/27(a) WITH PROPER HEAT SETTING

ADRDE/BP/1(b) with 20-30 % elongation & proper heat setting

ADRDE/BP/1(b) with 20-30 % elongation & proper heat setting

TAPE COTTON 20MM, 27KG KHAKI

ADRDE/SPECN/1993/41

• As per Specification/drawing

• As per Specification/drawing

TAPE TEXTILE NYLON TUB.36MM UNDYED (BS 29000 N.)

SPECIFICATION NO. ADRDE/SPECN/1985/27(b) Except that : Twist (TPM) Yarn as per clause no. 4.1 only Roll Length 82.5 mtr. Excluding Sampling

• As per Specification/Drawing

• As per Specification/Drawing

SPECN-AS PER PARTICULARS WIDTH :27(+1,-0)MM THICKNESS :1.95 +-0.06MM WEIGHT/METER :30.5 GM(MAX) BREAKING STRENGTH :1200 KG(MIN) HEAT SETTING :PROPER HEAT SETTING EXTENSION :20-30%

SPECN-AS PER PARTICULARS WIDTH :27(+1,-0)MM THICKNESS :1.95 +-0.06MM WEIGHT/METER :30.5 GM(MAX) BREAKING STRENGTH :1200 KG(MIN) HEAT SETTING :PROPER HEAT SETTING EXTENSION :20-30%

WIDTH-15(+1/-0)MM,THICKNESS-0.50MM(MAX),WEIGHT/MTR-4.6gm(max. BREAKING STRENGTH :185 KG(MIN) HEAT SETTING :PROPER HEAT SETTING REQUIRED TOTAL NO.OF ENDS :120 NO. PICKS/CM :12 NO. DENIER OF YARN :(a)ENDS:245,(b)PICKS:210 TPM(RANG) :WARP:80-95,(b)WEFT:85-90 EXTENSION AT BREAK :20-30% WEAVE :OXFORD(2 ENDS WERKING AS ONE)

WIDTH-15(+1/-0)MM,THICKNESS-0.50MM(MAX),WEIGHT/MTR-4.6gm(max. BREAKING STRENGTH :185 KG(MIN) HEAT SETTING :PROPER HEAT SETTING REQUIRED TOTAL NO.OF ENDS :120 NO. PICKS/CM :12 NO. DENIER OF YARN :(a)ENDS:245,(b)PICKS:210 TPM(RANG) :WARP:80-95,(b)WEFT:85-90 EXTENSION AT BREAK :20-30% WEAVE :OXFORD(2 ENDS WERKING AS ONE)

SPECN-AS PER PARTICULARS. WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX) WEIGHT/METER :5.2 GM(MAX) BREAKING STRENGTH :150 KG(MIN) HEAT SETTING :PROPER HEAT SETTING IS REQUIRED WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE) TOTAL NO.OF ENDS :228 PICKS/CM :24 DENIER OF YARN :(a)ENDS:153,(b)PICKS :150 T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215 EXTENSION AT BREAK :20-30%

SPECN-AS PER PARTICULARS. WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX) WEIGHT/METER :5.2 GM(MAX) BREAKING STRENGTH :150 KG(MIN) HEAT SETTING :PROPER HEAT SETTING IS REQUIRED WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE) TOTAL NO.OF ENDS :228 PICKS/CM :24 DENIER OF YARN :(a)ENDS:153,(b)PICKS :150 T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215 EXTENSION AT BREAK :20-30%

Tape Nylon 25 MM BS 450 KG U/D

ADRDE/SPECN/1992/38(b)

• As Per Specification/Drawing

• As Per Specification/Drawing

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II

SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II