Name
Code
Quantity
Approx Value
Select
VARNISH M L 92 GOST 15865 70
Description
VARNISH M L-92 GOST 15865-70
Specification
VARNISH M L-92 GOST 15865-70
Testing / Inspection Facility
10
180
Litre
BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI-GLOSSY AS PER IS:168
Description
BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI-GLOSSY AS PER IS:168
Specification
AS PER IS:168
Testing / Inspection Facility
10
720
Number
TUBE BLANK TO DRG NO OTF S 006 FOR 125 mm HEAT SHELL
Description
TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL
Specification
TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL
Testing / Inspection Facility
63
24000
Number
PACKING WASHER TO DET NO 073 OF DRG NO 4 025998 AS PER DRG NO M 11651
Physical Verification needed
Description
PACKING WASHER TO DET NO.(073) OF DRG. NO. 4-025998 AS PER DRG. NO. M-11651
Specification
PACKING WASHER TO DET NO.(073) OF DRG. NO. 4-025998 AS PER DRG. NO. M-11651
Testing / Inspection Facility
62
24000
Number
STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT
Physical Verification needed
Description
STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT
Specification
STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT
Testing / Inspection Facility
62
24000
Number
CONE IN FINISHED CONDITION TO DRG NO 4 025998 DET 069 SK NO OTF S 015 WITHOUT SURFACE TREATMENT
Physical Verification needed
Description
CONE IN FINISHED CONDITION TO DRG. NO. 4-025998 DET. 069 DC(I) 37003-A DT.11/3/05 (SK. NO. OTF/S/015) WITHOUT SURFACE TREATMENT
Specification
CONE IN FINISHED CONDITION TO DRG. NO. 4-025998 DET. 069 DC(I) 37003-A DT.11/3/05 (SK. NO. OTF/S/015) WITHOUT SURFACE TREATMENT
Testing / Inspection Facility
07
24000
Number
FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
Description
FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
Specification
FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
Testing / Inspection Facility
62
24000
Number
PACKING BOX (THERMOCOAL) TO DRG. NO CO-419/A
Description
PACKING BOX (THERMOCOAL) TO DRG. NO CO-419/A
Specification
AS PER DRAWING
Testing / Inspection Facility
14
24000
Number
TRANSIT PLUG AS PER SK NO M 7949
Description
TRANSIT PLUG AS PER SK.NO. M-7949 DT 29.09.95
Specification
AS PER DRG.
Testing / Inspection Facility
62
182000
Number
COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION
Description
COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)
Specification
COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)
Testing / Inspection Facility
07
4204
Number
STEEL ROUND 32MM DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN TY 14 1 2884 80
Description
STEEL ROUND 32MM +0.00MM -0.10MM DIA. COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN TY-14-1-2884-80 LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS IN STRAIGHT LONG (CHEMICAL COMPOSITION & MECHANICAL PROPERTIES ETC DETAILS AS ATTACHED LIST HERE WITH - FOR READY REFERENCE ONLY)
Specification
STEEL ROUND 32MM +0.00MM -0.10MM DIA. COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN TY-14-1-2884-80 LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS IN STRAIGHT LONG (CHEMICAL COMPOSITION & MECHANICAL PROPERTIES ETC DETAILS AS ATTACHED LIST HERE WITH - FOR READY REFERENCE ONLY)
Testing / Inspection Facility
03
157448
Kilogram
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 A IN F/C
Description
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 A IN F/C
Specification
AS PER DRAWING
Testing / Inspection Facility
14
5100
Number
VARNISH
Description
VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997
Specification
VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997
Testing / Inspection Facility
10
500
Litre
STEEL ROUND 30 point 10 MM plus 0point5MM dia TO SPCN 53 x M1 0 TY 14 1 2232 77 and OST B 84 748 81 ANNEALED AND PEELED CONDITION TO 2 point 50 MTRS TO 3 MTRS in straight length rods
Description
STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS
IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81
Specification
STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS
IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81
Testing / Inspection Facility
03
127360
Kilogram
COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION
Description
COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)
Specification
COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)
Testing / Inspection Facility
07
7100
Number
STEEL ROD DIA 32MM X 2 TO 3 DECIMAL FIVE MTR IN LENGTH TO MATL STEEL SPEC TY 14 1 2884 80 IN COLD DRAWN CONDITION
Description
STEEL ROD DIA 32MM (-0.1MM) X 2 TO 3 .5 MTR IN LENGTH TO MATL STEEL 50 SPEC TY :14 -1 -2884-80 IN COLD DRAWN CONDITION
Specification
STEEL ROD DIA 32MM (-0.1MM) X 2 TO 3 .5 MTR IN LENGTH TO MATL STEEL 50 SPEC TY :14 -1 -2884-80 IN COLD DRAWN CONDITION
Testing / Inspection Facility
03
139045
Kilogram
FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA
Description
FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA
Specification
AS PER DRAWING
Testing / Inspection Facility
91
165000
Number
COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN
Description
COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )
Specification
COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )
Testing / Inspection Facility
07
5735
Kilogram
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 A IN F/C
Description
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 A IN F/C
Specification
AS PER DRAWING
Testing / Inspection Facility
14
165000
Number
WOODEN PACKING BOX TO DRG NO CO 428
Description
WOODEN PACKING BOX TO DRG. NO. CO-428
Testing / Inspection Facility
14
25000
Number
DEEP SAXE BLUE TO BS 381 C 1980 TINT 113
Description
DEEP SAXE BLUE TO BS 381 C 1980 TINT 113
Specification
DEEP SAXE BLUE TO BS 381 C 1980 TINT 113
Testing / Inspection Facility
10
350
Litre
STEEL ROUND 80 MM DIA
Description
STEEL ROUND 80 MM +1 MM DIA TO SPECN. 070 M 55 TO BS-970:PT-1-1983 IN HOT ROLLED,PEELED & MAGNETICALLY CRACK DETECTION PASSED CONDN.END OF BAR SQUARE,YIED STREES-2% PRROF STRESS 650 MPA (MIN),ELONGATION-10% (MIN),LENGTH 1.2 MTR. OR IN MULTIPLE OF 300 THEREAFTER MATL. SHOULD BE FREE FROM FLAW.
Specification
STEEL ROUND 80 MM +1 MM DIA TO SPECN. 070 M 55 TO BS-970:PT-1-1983 IN HOT ROLLED,PEELED & MAGNETICALLY CRACK DETECTION PASSED CONDN.END OF BAR SQUARE,YIED STREES-2% PRROF STRESS 650 MPA (MIN),ELONGATION-10% (MIN),LENGTH 1.2 MTR. OR IN MULTIPLE OF 300 THEREAFTER MATL. SHOULD BE FREE FROM FLAW.
Testing / Inspection Facility
01
338000
Kilogram
DUMMY PELLET IN F/C TO DRG.NO.M-10395 DT. 27.08.2005
Description
DUMMY PELLET IN F/C TO DRG.NO.M-10395 DT. 27.08.2005
Specification
AS PER DRG. NO. M-10395
Testing / Inspection Facility
62
1620
Number
WOODEN PACKING BOX WITH PLASTIC LINER DRG NO CO 517
Description
WOODEN PACKING BOX WITH PLASTIC LINER DRG. NO. CO-517
Testing / Inspection Facility
14
40000
Number
FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG NO F 495E
Description
FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG.NO F-495E
Testing / Inspection Facility
61
40000
Number
BLANK FOR DISTANCE TUBE TO OFAJ DRG NO CC 533 C
Description
BLANK FOR DISTANCE TUBE TO OFAJ DRG. NO. CC-533-C
Specification
AS PER DRG.
Testing / Inspection Facility
62
40000
Number
BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN IS 168 1973 ISC NO 102 TO SPECN IS 5 1978
Description
BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978
Specification
BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978
Testing / Inspection Facility
10
560
Litre
PAINT RM SINGLE RED TO ISC 537 TO SPCN IS 138 1981
Description
PAINT RM SINGLE RED TO ISC-537 TO SPCN. IS-138-1981
Specification
PAINT RM SINGLE RED TO ISC-537 TO SPCN. IS-138-1981
Testing / Inspection Facility
10
120
Litre
BLANK FOR BODY CASTING FOR 84 MM TPT
Description
AS PER DRG.& SPECIFICATION
Specification
AS PER DRG.& SPECIFICATION
Testing / Inspection Facility
61
40000
Number
BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011
Description
BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011
Specification
BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011
Testing / Inspection Facility
61
40000
Number
Plastic Liner to GSF SK NO M 6810 1
Physical Verification needed
Description
Plastic Liner to GSF SK NO. M-6810/1
Specification
Plastic Liner to GSF SK NO. M-6810/1
Testing / Inspection Facility
61
40000
Number
PACKING BOX CO 262 3 A IN FC
Description
PACKING BOX CO-262/3A IN FC
Testing / Inspection Facility
14
40000
Number
BODY WITH CONTACT SK NO OTF PG 011 IN FC
Description
BODY WITH CONTACT, DET. CD1-2 TO SK. NO. OTF/PG/011 IN FC
Testing / Inspection Facility
62
26000
Number
CAP TO SK NO OTF PG 002 IN FC
Description
CAP,ET.1-6 OF DRG. NO.3-024044 TO SK NO. OTF PG 002 IN FC.
Specification
AS PER DRG.
Testing / Inspection Facility
62
26000
Number
SLEEVE TO SK NO OTF PG 006
Description
SLEEVE TO DET.1-8B TO SK. NO. OTF/PG/006 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
62
26000
Number
NUT IN FC TO SK NO OTF PG 003
Description
NUT IN F/C TO SK. NO. OTF/PG/003
Testing / Inspection Facility
64
26000
Number
CONTAINER AS PER DRG NO M 9121 B
Description
CONTAINER AS PER DRG. NO. M-9121B
Testing / Inspection Facility
14
26000
Number
BUSH TO SK NO OTF DD 013 IN FC
Description
BUSH TO DET 2-20 TO SK. NO. OTF/DD/013 IN F/C.
Testing / Inspection Facility
62
26000
Number
PLATE TO DET No 2 8 OF DRG NO SK NO OTF DD 016
Description
PLATE TO DET 2-8 TO SK. NO. OTF/DD/016 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
62
26000
Number
STEEL BALL TO SK NO OTF DD 031 IN FC
Description
STEEL BALL V 3.175 TY-37.006.080-77 TO SK NO OTF/DD/031 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
62
26000
Number
CAP TO SK NO OTF DD 001 IN FC
Description
CAP DET NO. 21 TO SK. NO. OTF/DD/001 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
62
26000
Number
SPRING TO SK NO OTF DD 015 IN FC
Description
SPRING,DET (2-15) TO SK. NO. OTF/DD/015 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
62
26000
Number
STOPPER OTF DD 004 IN FC
Description
STOPPER DET 2-6 , DRG. NO. 3-024045 (OTF/DD/004) IN F/C
Testing / Inspection Facility
62
26000
Number
BODY SUB ASSY DET Cd 3 TO DRG NO 3 022859 TO SK NO OTF SE 010 IN F C
Description
AS PER DRG. & SPECIFICATION
Specification
AS PER DRG. & SPECIFICATION
Testing / Inspection Facility
62
26000
Ample
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 485
Description
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO CO-485
Specification
AS PER DRAWING
Testing / Inspection Facility
14
26000
Number
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 484 A
Description
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO CO-484 A
Specification
AS PER DRAWING
Testing / Inspection Facility
14
26000
Number
Body with Insulation to GSF Sketch No OTF DD 023 for Fuze B 15
Description
Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15
Specification
Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15
Testing / Inspection Facility
62
26000
Number
CONTACT (TO SK.NO.OTF/DD/011) DET.NO.2-12 IN F/C..
Testing / Inspection Facility
62
26000
Number
SHUTTER TO DRAWING NO IQX-7 FOR FUZE MK-8 & 9
Description
SHUTTER TO DRAWING NO IQX-7 FOR FUZE MK-8 & 9
Specification
AS PER DRAWING
Testing / Inspection Facility
63
4000
Number
SPRING QX 344
Description
SPRING IN F/C PT QX-344
Specification
SPRING IN F/C PT QX-344
Testing / Inspection Facility
63
4000
Number
Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02
Description
Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02
Specification
Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02
Testing / Inspection Facility
63
4000
Number
STRIKER TO DRG. NO IQX-1000 IN FINISHED CONDITION DC(I) NO-37 263-A DT 26/08/2010
Description
STRIKER TO DRG. NO IQX-1000 IN FINISHED CONDITION DC(I) NO-37 263-A DT 26/08/2010
Specification
AS PER DRAWING
Testing / Inspection Facility
63
4000
Number
STOP DETENT TO DRG NO IQX 1002
Description
STOP DETENT TO DRG. NO. IQX-1002 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
63
4000
Number
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 490 B
Description
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO CO-490 B
Specification
AS PER DRAWING
Testing / Inspection Facility
14
4000
Number
WOODEN PACKING BOX NO CO 374 B 760 X 610X 63 MM
Description
WOODEN PACKING BOX NO. CO-374 B (760 X 610X 63 MM)
Specification
AS PER DRAWING
Testing / Inspection Facility
14
156600
Number
STEEL STRIP 0 POINT 1 MM
Description
STEEL STRIP 0.1 MM -0.02 MM THICK X 21 MM -1 MM WIDTH
Specification
STEEL STRIP 0.1 MM -0.02 MM THICK X 21 MM -1 MM WIDTH
Testing / Inspection Facility
15
79
Kilogram
BRASS STRIP 0 POINT 6 MM
Description
BRASS STRIP 0.6 MM -0.05 MM THICK X 12 MM +1 MM WIDTH
Specification
BRASS STRIP 0.6 MM -0.05 MM THICK X 12 MM +1 MM WIDTH
Testing / Inspection Facility
71
188
Kilogram
BRASS STRIP 1 MM
Description
BRASS STRIP 1 MM -0.1 MM THICKNESS X 18 MM -1 MM WIDTH
Specification
BRASS STRIP 1 MM -0.1 MM THICKNESS X 18 MM -1 MM WIDTH
Testing / Inspection Facility
71
93
Kilogram
STEEL ROD 14 5 MM DIA
Description
STEEL ROD 14.5 MM DIA -0.1 MM TO IS:4431 10C8S10 IN CD
Specification
STEEL ROD 14.5 MM DIA -0.1 MM TO IS:4431 10C8S10 IN CD
Testing / Inspection Facility
13
4071
Kilogram
GASKET NAI J 501 17 A
Description
GASKET (SILK CLOTH) TO DRG. NO. NAI(J) 501/17/A IN F/C
Specification
GASKET (SILK CLOTH) TO DRG. NO. NAI(J) 501/17/A IN F/C
Testing / Inspection Facility
63
156600
Number
STEEL ROD 3 POINT 5 MM DIA BS 970
Description
STEEL ROD 3.5 MM DIA TO SPECN BS-970 PT-1 GR 80M50
Specification
STEEL ROD 3.5 MM DIA TO SPECN BS-970 PT-1 GR 80M50
Testing / Inspection Facility
14
204
Kilogram
CAP NAI J 501 9 1
Description
CAP I/I TO DRG NO NAI(J) 501/9/1 IN FINISH CONDITION
Specification
CAP I/I TO DRG NO NAI(J) 501/9/1 IN FINISH CONDITION
Testing / Inspection Facility
63
156600
Number
LITTLE CUP NAI J 501 08 7
Description
LITTLE CUP TO DRG NO NAI(J) 501/08/7 IN FINISH CONDITION
Specification
LITTLE CUP TO DRG NO NAI(J) 501/08/7 IN FINISH CONDITION
Testing / Inspection Facility
63
156600
Number
DELAY TRAIN TO DRG NO NAI J 501 8 3 IN F C
Description
DELAY TRAIN TO DRG NO NAI(J) 501/8/3 IN FINISH CONDITION
Specification
DELAY TRAIN TO DRG NO NAI(J) 501/8/3 IN FINISH CONDITION
Testing / Inspection Facility
63
156600
Number
AL ALLOY ROD 26 POINT 5 MM DIA PLUS MINUS 0 POINT 25 MM TO SPECN IS 733
Description
AL ALLOY ROD 26.5 MM DIA+/-0.25 MM TO SPECN IS:733
Specification
AL ALLOY ROD 26.5 MM DIA+/-0.25 MM TO SPECN IS:733
Testing / Inspection Facility
61
7047
Kilogram
GASKET PAPER DRG NO NAI J 501 7 IN FINISH CONDITION
Description
GASKET (PAPER) DRG NO NAI(J) 501/7 IN FINISH CONDITION
Specification
GASKET (PAPER) DRG NO NAI(J) 501/7 IN FINISH CONDITION
Testing / Inspection Facility
63
156600
Number
SET BACK RING TO DRG. NO. NAI(J) 501/6/4 IN FINISHED CONDITION
Description
SET BACK RING TO DRG. NO. NAI(J) 501/6/4 IN FINISHED CONDITION
Specification
AS PER DRAWING
Drawing no.
NAI(J)/501/6/4
Testing / Inspection Facility
60
156600
Number
COPPER STRIP TO SPECN IS 3487 66 CHEMICAL COMP
Description
COPPER STRIP TO SPECN IS:3487-66 CHEMICAL COMP
Specification
COPPER STRIP TO SPECN IS:3487-66 CHEMICAL COMP
Testing / Inspection Facility
70
282
Kilogram
MEMBRANE TO DRG NO NAI J 501 6 2 IN FINISH CONDITION
Description
MEMBRANE TO DRG NO NAI(J)/501/6/2 IN FINISH CONDITION
Specification
MEMBRANE TO DRG NO NAI(J)/501/6/2 IN FINISH CONDITION
Testing / Inspection Facility
63
156600
Number
LOCATOR TO DRG. NO. NAI(J)/501/6/1 IN FINISHED CONDITION
Description
LOCATOR TO DRG. NO. NAI(J)/501/6/1 IN FINISHED CONDITION
Specification
AS PER DRAWING
Drawing no.
NAI(J)501/6/1
Testing / Inspection Facility
60
156600
Number
steel ball 3 point 5 mm dia to drg no NAI J 501 5 IN FINISH CONDITION
Description
steel ball 3.5 mm dia to drg no NAI(J) 501/5 IN FINISH CONDITION
Specification
steel ball 3.5 mm dia to drg no NAI(J) 501/5 IN FINISH CONDITION
Testing / Inspection Facility
63
156600
Number
TOP PLUG TO DRG. NO. NAI(J) 501/2 IN FINISHED CONDITION
Description
TOP PLUG TO DRG. NO. NAI(J) 501/2 IN FINISHED CONDITION
Specification
AS PER DRAWING
Testing / Inspection Facility
60
156600
Number
STEEL ROD 7MM DIA TO SPECN IS 1673 GR I
Description
STEEL ROD 7MM DIA TO SPECN IS-1673 GR-I
Specification
STEEL ROD 7MM DIA TO SPECN IS-1673 GR-I
Testing / Inspection Facility
10
909
Kilogram
SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION
Description
SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION
Specification
SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION
Testing / Inspection Facility
63
156600
Number
SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630
Description
NAI(J) 501/6/3(P) FOR Fz DASD AK-630
Specification
NAI(J) 501/6/3(P) FOR Fz DASD AK-630
Testing / Inspection Facility
63
156600
Number
SPRING QX 344
Description
SPRING IN F/C PT QX-344
Specification
SPRING IN F/C PT QX-344
Testing / Inspection Facility
63
18000
Number
PIN HINGE QX 1248
Description
PIN HINGE TO DRG NO QX-1248 IN F/C
Specification
PIN HINGE TO DRG NO QX-1248 IN F/C
Testing / Inspection Facility
63
18000
Number
SPRING IN FC GSF SK NO M 6743 PT QX 341
Description
SPRING IN FC GSF SK. NO. M 6743 PT QX-341
Specification
AS PER DRG.
Testing / Inspection Facility
63
18000
Number
WASHER IQX 123
Description
WASHER TO DRG NO IQX-123 IN FINISH CONDITION
Specification
WASHER TO DRG NO IQX-123 IN FINISH CONDITION
Testing / Inspection Facility
63
18000
Number
CLIP QX 439
Description
CLIP TO DRG. NO. D3/L/3052/E/374, PT NO QX-439 IN F/C
Specification
CLIP TO DRG. NO. D3/L/3052/E/374, PT NO QX-439 IN F/C
Testing / Inspection Facility
63
18000
Number