Name
Code
Quantity
Approx Value
Select
STUD BAYONET FOR CARBINE 9 MM
Description
STUD BAYONET DS CAT NO-5307-000965 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24785-SA-DT.26-07-2000.
Specification
STUD BAYONET DS CAT NO-5307-000965 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24785-SA-DT.26-07-2000.
Drawing no.
DS CAT NO-5307-000965
Testing / Inspection Facility
70
500
Number
STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06
Description
STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06
Specification
DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06
Testing / Inspection Facility
70
8000
Number
STEEL STRIP FOR FIRING DEVICE
Description
STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)
Specification
STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
01
500
Kilogram
STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3
Description
STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.&
(S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14
Specification
STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.&
(S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14
Testing / Inspection Facility
03
8000
Kilogram
STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8
Description
STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8 TEST PIESE TO BE TES TED AS PER SPECIFICATION.MACRO ETCH TEST AND NMIR TEST. (LENGTH OF BAR MUST BE 300 MM.)
Specification
SPECN. IS:5517 -1993, DESIGNATION 40 C8
Testing / Inspection Facility
01
500
Kilogram
STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
Description
STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE TEST PIECE TO BE TESTED AS PER SPECN. MATERIAL SHOULD ALSO SATISF Y THE TESTS AS LAID DOWN IN THE ANNEXURE "A" NATURE "C".
Specification
SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
Testing / Inspection Facility
01
500
Kilogram
STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
Description
STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE TEST PIECE TO BE TESTED AS PER SPECN. MATERIAL SHOULD ALSO SATISF Y THE TESTS AS LAID DOWN IN THE ANNEXURE "A" NATURE "C".
Specification
SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
Testing / Inspection Facility
01
500
Kilogram
STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION
Description
STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE.
Specification
STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE.
Testing / Inspection Facility
01
8000
Kilogram
Steel Investment Casting for CAP for Carbine 9mm
Description
STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1
Specification
STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1
Testing / Inspection Facility
01
500
Number
ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE
Description
ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE TEST PIECE TO B E BLANK CARBURISED HEATTRATED & TESTED FOR COREPROPEERTIES I N ACCORDANCE W/RELEVANT CLAU.OF SPECN 'NI'SPOT TEST TO BE DO NE 100
Specification
SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE
Testing / Inspection Facility
04
500
Kilogram
ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36
Description
ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36 SEC.2. SEPARATE TEST PIECES ARE TO BE HARDENED & TEMPERED TO CONDN."V" TO ACHIEVE HARDNESS293-352 HB MACRO-ETCH TEST & NMIR TEST AS P ER ANNEXURE-A NATURE-C
Specification
SPECIFICATION BS:970.PT.1 1983 GD.605M36
Testing / Inspection Facility
02
500
Kilogram
ST STRIP MM FOR REVOLVER
Description
ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).
Specification
ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).
Testing / Inspection Facility
01
8000
Kilogram
ST ROUND 8 MM DIA
Description
ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82
Specification
ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82
Testing / Inspection Facility
03
500
Kilogram
ST FLAT SIZE 22 X 60MM
Description
ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40,
Specification
ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40,
Testing / Inspection Facility
01
500
Kilogram
SQUARE DRAWN 1 upon 4 Inch ROD FOR FIRING DEVICE
Description
SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H
Specification
SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H
Testing / Inspection Facility
Chemical & Mechanical properties as per std. given drawing. Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing
01
500
Kilogram
SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM
Description
SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001
Specification
SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001
Drawing no.
DS CAT NO 5360-007416
Testing / Inspection Facility
70
500
Number
SPG STEEL WIRE 1.216 MM (18SWG)
Description
SPRING STEEL WIRE 18 SWG (0.048") DIA TO SPECIFICATION BS:5216-1991 GD ND-3 REQUIRED FOR SPRING MAIN OF 9MM CARBINE
Specification
SPRING STEEL WIRE 18 SWG (0.048") DIA TO SPECIFICATION BS:5216-1991 GD ND-3 REQUIRED FOR SPRING MAIN OF 9MM CARBINE
Testing / Inspection Facility
01
500
Kilogram
SPRING SPECIAL PURPOSE AS PER FOR FIRING DEVICE IB
Description
SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB
Specification
SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB
Drawing no.
DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713
Manufacturing Technology
Spring Manufacturing Machine
Testing / Inspection Facility
-Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
500
Number
SPRING PLUNGER DS CAT NO-5360-000787 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26908-SA, DT.05-08-2016.
Description
SPRING PLUNGER DS CAT NO-5360-000787 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26908-SA, DT.05-08-2016.
Specification
SPRING PLUNGER DS CAT NO-5360-000787 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26908-SA, DT.05-08-2016.
Drawing no.
DS CAT NO-5360-000787
Testing / Inspection Facility
70
500
Number
SPRING LOCKING TRIGGER MECH D S CAT NO 5360 007084 IN FINISHED CONDITION CARBINE 9MM
Description
SPRING LOCKING TRIGGER MECH D S CAT NO-5360-007084 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26906-SA DT.03-08-16.
Specification
SPRING LOCKING TRIGGER MECH D S CAT NO-5360-007084 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26906-SA DT.03-08-16.
Drawing no.
D S CAT NO-5360-007084
Testing / Inspection Facility
70
500
Number
SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB
Description
SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
Specification
SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
Drawing no.
DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
500
Number
SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER
Description
SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03
Specification
SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03
Drawing no.
DRG NO.PH-1-12
Testing / Inspection Facility
70
8000
Number
SPG CATCH MAGAZINE 5360 000789 FOR CARBINE 9MM
Description
SPG.CATCH MAGAZINE DS CAT NO.5360-000789 IN FINISHED CONDITION DC(I)26906-SA,DT.03-08-2016.
Specification
SPG.CATCH MAGAZINE DS CAT NO.5360-000789 IN FINISHED CONDITION DC(I)26906-SA,DT.03-08-2016.
Drawing no.
DS CAT NO.5360-000789
Manufacturing Technology
Coiling : Spring manufacturing Machine
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
500
Number
SLING 9MM STEN MACHINE CARBINE D S CAT NO 1005 001003 MK 2 L A WEBBING 55 IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK DC I 26218 SA DATED 05 06 2006
Description
SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006
Specification
SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006
Drawing no.
D.S.CAT.NO. 1005-001003
Manufacturing Technology
SEWING & FABRICATION WORK
Testing / Inspection Facility
CHEMICAL & MECHANICAL PROPERTIES AS PER STD. GIVEN DRAWING DEMENSIONAL INSPECTION FOR ALL DEMENSIONS GIVEN IN THE DRAWING & OTHER PARAMETER WHICH ARE MENTIONED IN RELEVANT DRAWINGS.
70
500
Number
SILVER BRAZING FOIL 0.127MM X 25.4MM WIDE W/0 NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10
Description
SILVER BRAZING FOIL 0.127MM X 25.4MM WIDE W/0 NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10
Specification
SPECN. IS-2927-1975 GD. BA CU AG-10
Testing / Inspection Facility
08
50
Kilogram
SILVER BRAZING ALLOY ROD 1/16
Description
SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10
Specification
SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10
Testing / Inspection Facility
08
50
Kilogram
SILVER BRAZING ALLOY FOIL O.01
Description
SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECN IS-2927-1975 GD. BA CU AG-10,
Specification
SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECN IS-2927-1975 GD. BA CU AG-10,
Testing / Inspection Facility
08
50
Kilogram
SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10
Description
SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10
Specification
SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10
Testing / Inspection Facility
08
10
Kilogram
SET SCREW DSCAT NO 5305 005083 IN FINISHED CONDITION FOR CARBINE 9MM
Description
SET SCREW,DSCAT NO. 5305-005083 IN FINISHED CONDITION D C (I) NO.26372-SA DT.16-08-2007
Specification
SET SCREW,DSCAT NO. 5305-005083 IN FINISHED CONDITION D C (I) NO.26372-SA DT.16-08-2007
Testing / Inspection Facility
70
500
Number
SECONDRY REFIND AOD VOD QUALITY STEEL ROD 46MM DIA FOR CARBINE 9MM
Description
SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING TO THE SPECIFICTION JSS 9510-06:2012 CODE REF "B" IN HOT ROLLED ,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET-CH TESTING TO CON IS 13015:1991 & NMIR TEST
Specification
SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING TO THE SPECIFICTION JSS 9510-06:2012 CODE REF "B" IN HOT ROLLED ,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET-CH TESTING TO CON IS 13015:1991 & NMIR TEST
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
03
500
Number
SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007
Description
SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007
Specification
SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007
Drawing no.
D S CAT NO- 1005-000833
Testing / Inspection Facility
70
500
Number
SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER
Description
SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11
Specification
SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11
Drawing no.
DRG NO PHMK-III-1-15
Testing / Inspection Facility
70
8000
Number
SCREW SPECIAL FOR FIRING DEVICE IB
Description
SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB
Specification
SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB
Drawing no.
DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657
Testing / Inspection Facility
Chemical & Mechanical properties as per Std. Given drawing Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing
70
500
Number
SCREW SPECIAL AS PER DRG NO CQA I 393 7 CAT PT NO 5305 016656 FOR FIRING DEVICE IB
Description
SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB
Specification
SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB
Drawing no.
DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
500
Number
SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM
Description
SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION
Specification
SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION
Drawing no.
DS CAT NO. 5305-005082
Testing / Inspection Facility
70
500
Number
SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM
Description
SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION
Specification
SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION
Drawing no.
DS CAT NO. 5305-005082
Testing / Inspection Facility
70
500
Number
SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER
Description
SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04
Specification
SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04
Drawing no.
DRG NO. PH-1-16
Testing / Inspection Facility
70
8000
Number
SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER
Description
SCREW PLUNGER TO DRG NO.PH-1-26 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04
Specification
SCREW PLUNGER TO DRG NO.PH-1-26 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04
Drawing no.
DRG NO.PH-1-26
Testing / Inspection Facility
70
8000
Number
SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER
Description
SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19
Specification
SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19
Drawing no.
PHMK-III-1-19
Testing / Inspection Facility
70
8000
Number
SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER
Description
SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09
Specification
SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09
Testing / Inspection Facility
70
8000
Number
SCREW GRUB B A STEEL CONICAL POINTED DS CAT NO 5305 005079 FOR CARBINE 9MM
Description
SCREW GRUB B.A. STEEL CONICAL POINTED DS CAT NO.5305-005079 DC-26341-SA DATED 01-06-07
Specification
SCREW GRUB B.A. STEEL CONICAL POINTED DS CAT NO.5305-005079 DC-26341-SA DATED 01-06-07
Drawing no.
DS CAT NO.5305-005079
Testing / Inspection Facility
70
500
Number
SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION
Description
SCREW FIXING LEVER CAM TO DRG.NO PH-1-20 IN FINISHED CONDITION. D.A. NO. 06/04 DT. 24.01.04
Specification
SCREW FIXING LEVER CAM TO DRG.NO PH-1-20 IN FINISHED CONDITION. D.A. NO. 06/04 DT. 24.01.04
Drawing no.
DRG.NO PH-1-20
Testing / Inspection Facility
70
8000
Number
SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE
Description
SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659
Specification
SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659
Drawing no.
CAT./PT.NO.5305-016659
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
500
Number
Screw catch magazine DS CAT No. 5305-005080 in finished conditon of SMG 9 MM Carbine
Description
AS PER DRG.DS CAT No. 5305-005080
Specification
AS PER DRG.DS CAT No. 5305-005080
Testing / Inspection Facility
70
500
Number
SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08
Description
SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08
Specification
SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08
Drawing no.
DRG NO. PH-1-13
Testing / Inspection Facility
70
8000
Number
SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04
Description
SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04
Specification
SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04
Drawing no.
DRG NO. PH-1-28
Testing / Inspection Facility
70
8000
Number
SCABBARD BAYONET FOR CARBINE 9MM
Description
SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94
Specification
SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94
Testing / Inspection Facility
70
500
Number
SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23
Description
SAFETY FOR REVOLVER MK-III REQUIRED IN FINISHED CONDITION DRG NO PHMK-III-1-23
Specification
SAFETY FOR REVOLVER MK-III REQUIRED IN FINISHED CONDITION DRG NO PHMK-III-1-23
Drawing no.
PHMK-III-1-23
Testing / Inspection Facility
70
8000
Number
ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001
Description
ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001
Specification
ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001
Drawing no.
.S.CAT NO.1005-000983
Testing / Inspection Facility
70
500
Number
RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56
Description
RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16
Specification
RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16
Drawing no.
DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210
Testing / Inspection Facility
70
500
Number
REXINE SYNTHETIC POUCH FOR REVOLVER
Description
REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM)
Specification
REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM)
Testing / Inspection Facility
71
8000
Number
GRIP ASSY OF REVOLVER MK-III
Description
REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D.A. NO. 09/11, DT. 26.04.11,
Specification
REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D.A. NO. 09/11, DT. 26.04.11,
Drawing no.
As per drqwing
Testing / Inspection Facility
70
8000
Number
REBOUND TRIGGER IN FINISHED COFOR REVOLVER MK III THROUGH MIM ROUTE
Description
REBOUND TRIGGER, DRG. NO. PHMK-III-1-32 (ALT) IN FINISHED COFOR REVOLVER MK-III,THROUGH MIM ROUTE.
Specification
REBOUND TRIGGER, DRG. NO. PHMK-III-1-32 (ALT) IN FINISHED COFOR REVOLVER MK-III,THROUGH MIM ROUTE.
Drawing no.
DRG. NO. PHMK-III-1-32
Testing / Inspection Facility
70
8000
Number
REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III
Description
REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III
Specification
REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III
Drawing no.
DRG NO PHMK-III-1-22
Testing / Inspection Facility
70
8000
Number
RAW MATERIAL OF BARREL ST ROD 40 MM DIA TO SPEC JSS 9510 06 2012 CODE REF B T I COND
Description
RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510-06-2012 CODE REF .B. T - I COND. WITH COMPOSITION N RESTRICTION S%=0.01 MAX., P%=0.015MAX & (S+P)%=0.022MAX. ANNEXURE NO. 7158/DDO/LMG 5.56MM BARREL FOR TESTING PARA ENCLOSED., QUALITY AOD/VOD.
Specification
SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.
Testing / Inspection Facility
01
500
Kilogram
Plunger DRG No. 1005-000832
Specification
As per Drg.
Testing / Inspection Facility
70
500
Number
PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM
Description
PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1
Specification
PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1
Drawing no.
DS CAT NO-1005-000851
Testing / Inspection Facility
70
500
Number
PLUNGER TO DRG NO. PH-1-24 IN FINISHED CONDITION. D.A. NO.67/99 DT.-15.5.99
Description
PLUNGER TO DRG NO. PH-1-24 IN FINISHED CONDITION. D.A. NO.67/99 DT.-15.5.99
Specification
PLUNGER TO DRG NO. PH-1-24 IN FINISHED CONDITION. D.A. NO.67/99 DT.-15.5.99
Testing / Inspection Facility
70
8000
Number
PLUNGER PAWL FOR REVOLVER MK-III DRG NO PHMK-III-1-34 IN FINISHED CONDITION
Description
PLUNGER PAWL FOR REVOLVER MK-III DRG NO PHMK-III-1-34 IN FINISHED CONDITION
Specification
PLUNGER PAWL FOR REVOLVER MK-III DRG NO PHMK-III-1-34 IN FINISHED CONDITION
Drawing no.
PHMK-III-1-34
Testing / Inspection Facility
70
8000
Number
PLUG FOR FIRING DEVICE 1B FOR MINE
Description
PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE
Specification
PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE
Drawing no.
DRG.NO. CQA(I)393/4
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.given drawing 2-Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
500
Number
Plate form Assy. In Finished Cond. DS CAT No. 1005-000978
Specification
AS PER DRG.
Testing / Inspection Facility
70
500
Number
PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.
Description
PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.
Specification
PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.
Drawing no.
DS CAT NO. 1005-000888
Testing / Inspection Facility
70
500
Number
PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
Description
PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
Specification
PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
Drawing no.
DS CAT NO.1005-000985
Testing / Inspection Facility
70
500
Number
PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.
Description
PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.
Specification
PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.
Drawing no.
DS CAT NO. 1005-000887
Testing / Inspection Facility
70
500
Number
PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04.
Description
PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04.
Specification
PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04.
Drawing no.
D S CAT NO-1005-000881
Testing / Inspection Facility
70
500
Number
Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm
Description
AS PER DRG.no. 1005-000977
Specification
AS PER DRG.no. 1005-000977
Testing / Inspection Facility
70
500
Number
PLATE BODY IC OF REV MK III
Description
PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1
Specification
PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1
Drawing no.
DRG NO SK-5376R*1
Testing / Inspection Facility
01
8000
Number
PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.
Description
PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.
Specification
PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.
Drawing no.
D S CAT NO-1005-000880
Testing / Inspection Facility
70
500
Number
PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2
Description
PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2
Specification
PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2
Drawing no.
DRG.NO.SK-4745*2
Testing / Inspection Facility
70
8000
Number
PIVOT BUTT TO DS CAT NO 1005 000879 IN FINISHED CONDITION FOR CARBINE 9MM
Description
PIVOT BUTT TO DS CAT NO.1005-000879 IN FINISHED CONDITION.DC(I) NO. 26883-SA DT.04.07.16.
Specification
PIVOT BUTT TO DS/CAT NO.1005-000879 IN FINISHED CONDITION.DC(I) NO. 26883-SA DT.04.07.16.
Drawing no.
DS CAT NO.1005-000879
Testing / Inspection Facility
1) Chemical & Mechanical propertles as per std. given drawing /Specification.
2) Dimensional inspection for all dimension & given in the drawing & other parameter which are mentioned in relevant drawing/specification.
70
500
Number
PIN FIRING FOR REVOLVER
Description
PIN-FIRING DRG.NO-PH-MK-II-1-29 IN FINISHED CONDITION OF 32"REVOLVER MK-III.
Specification
PIN-FIRING DRG.NO-PH-MK-II-1-29 IN FINISHED CONDITION OF 32"REVOLVER MK-III.
Drawing no.
DRG.NO-PH-MK-II-1-29
Testing / Inspection Facility
70
8000
Number
PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008
Description
PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008
Specification
PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008
Drawing no.
DRG. NO. PH-7-3
Testing / Inspection Facility
70
8000
Number
PIN KEEP SPLIT FOR FIRING DEVICE
Description
PIN, KEEP SPLIT 1.19 X 12.7 (CAT. NO. GI/GA 1662).
Specification
PIN, KEEP SPLIT 1.19 X 12.7 (CAT. NO. GI/GA 1662).
Testing / Inspection Facility
70
500
Number
PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99
Description
PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99
Specification
PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99
Drawing no.
DRG NO.PH-6-5
Testing / Inspection Facility
70
8000
Number
PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE
Description
PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
Specification
PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
Drawing no.
DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
500
Number
PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32
Description
PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05
Specification
PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05
Drawing no.
DRG.NO-PH-MK-II-1-31
Testing / Inspection Facility
70
8000
Number
PIN SPRING STOP DS CAT NO 5315 002026 IN FINISHED CONDITION FOR CARBINE 9MM
Description
PIN SPRING STOP DS CAT NO 5315-002026 DC(I)NO.24969 DATED 19-03-2001 IN FINISHED CONDITION
Specification
PIN SPRING STOP DS CAT NO 5315-002026 DC(I)NO.24969 DATED 19-03-2001 IN FINISHED CONDITION
Drawing no.
DS CAT NO 5315-002026
Testing / Inspection Facility
70
500
Number
PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001
Description
PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001
Specification
PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001
Drawing no.
DS CAT NO. 5315-002018
Testing / Inspection Facility
70
500
Number
PIN LOCKING TRIGGER MECH-9MM
Description
PIN LOCKING TRIGGER MECH.D S CAT NO 1005-000904 9MM CARBINE FINISHED CONDITION (ICR NO 1080) DC NO. 26896-SA DT. 18/07/2016
Specification
PIN LOCKING TRIGGER MECH.D S CAT NO 1005-000904 9MM CARBINE FINISHED CONDITION (ICR NO 1080) DC NO. 26896-SA DT. 18/07/2016
Drawing no.
D S CAT NO 1005-000904
Testing / Inspection Facility
70
500
Number
PIN LEVER LOCKING D S CAT NO-1005-000871 IN FINISHED CONDITI ON OF SMG 9MM CARBINE 1A1.DC(I)26882-SA DT.02-07-16.
Description
PIN LEVER LOCKING D S CAT NO-1005-000871 IN FINISHED CONDITI ON OF SMG 9MM CARBINE 1A1.DC(I)26882-SA DT.02-07-16.
Specification
PIN LEVER LOCKING D S CAT NO-1005-000871 IN FINISHED CONDITI ON OF SMG 9MM CARBINE 1A1.DC(I)26882-SA DT.02-07-16.
Drawing no.
D S CAT NO-1005-000871
Testing / Inspection Facility
70
500
Number