BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002
Specification
BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002
.
AS PER DRG DS CAT 1005-006830 DS (I) 25400-SA DT 16-06-02 (WITH SAF MATERIAL IN LF 0145032065 ST FLAT 10X25 MM SPECN BS:970-PT-1:1983 GR 070 MSS A/G BANK GUARANTEE
STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250.
Specification
STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250.
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15
Specification
STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MMTO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14
Specification
STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MMTO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14
STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 AS PER DRG. NO. SK-5092*2(RAW MATERIAL SIZE- 40X50 MM BS:970 PT.1-1983,817 M40 "T"(BS:970 EN 24 "T")COND.HARDNESS 248-302 HB AGAINST L.F. NO. 0334032650 WILL BE SUPPLIED BY SAF AGAINST B/G).
Specification
STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 AS PER DRG. NO. SK-5092*2(RAW MATERIAL SIZE- 40X50 MM BS:970 PT.1-1983,817 M40 "T"(BS:970 EN 24 "T")COND.HARDNESS 248-302 HB AGAINST L.F. NO. 0334032650 WILL BE SUPPLIED BY SAF AGAINST B/G).
STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
Specification
STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
ST.STRIP SIZE:- 1.8MM THICK X270MM WIDE X1600MM LONG TO SPECN. IS:7226-1974 GRADE C-40, COLD ROLLED & ANNEALED CONDN. NOTE:- GRAIN DIRECTION SHOULD BE ALONG THE LENGTH.
Specification
ST.STRIP SIZE:- 1.8MM THICK X270MM WIDE X1600MM LONG TO SPECN. IS:7226-1974 GRADE C-40, COLD ROLLED & ANNEALED CONDN. NOTE:- GRAIN DIRECTION SHOULD BE ALONG THE LENGTH.
ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).
Specification
ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).
Drawing no.
ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).
ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82
Specification
ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82