16721
OPF/ADVANCE VR/EOI/JANUARY-19/ METAL-01
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
WOOLLEN FELT 3 MM THICK
Description
SPECN NO:IS:1719-1988.
Specification
SPECN NO:IS:1719-1988.
Testing / Inspection Facility
2101877099
80
Number
TOWING RING SMALL 14.5mm
Description
SPECN. NO.:.Drg.NO.ADRDE/77 (e)
Specification
SPECN. NO.:.Drg.NO.ADRDE/77 (e)
Testing / Inspection Facility
2110999002
33564
Number
TOWING RING LARGE - 82mm
Description
SPECN NO.Prov.Drg.No.ADRDE/77(e)
Specification
SPECN NO.Prov.Drg.No.ADRDE/77(e)
Testing / Inspection Facility
2110999001
2762
Number
RIP CORD LARGE
Description
RIP CORD LARGE ADRDE/115(f)
Specification
PROV DRAWING NO.ADRDE/115(f).
Drawing no.
ADRDE/115(f).
Testing / Inspection Facility
2110027005
3036
Number
MODIFIED COIL SPRING
Description
SPECN-ADRDE/271(b)
NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.
Specification
SPECN-ADRDE/271(b)
NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.
Drawing no.
DRAWING ADRDE/271(b)
Testing / Inspection Facility
2110005001
2572
Number
PULLY SMALL
Description
PULLY SMALL Prov.Drg. NO. ADRDE/172(b).
Specification
Prov. Drg. NO. ADRDE/172(b).
Drawing no.
Prov.Drg. NO. ADRDE/172(b).
Testing / Inspection Facility
2055100006
1710
Number
GROMMET BRASS WITH STEEL WASHER 14 MM
Description
AS PER SPECIFICATION
Specification
DRAWING NO.: ADRDE/291
Testing / Inspection Facility
2110005000
2196
Number
PULLEY FOR BP SU 30
Description
PULLEY FOR BP SU 30
Specification
PULLEY FOR BP SU 30
Manufacturing Technology
DRG.NO.ADRDE/1402-01--002
Testing / Inspection Facility
DRG.NO.ADRDE/1402-01--002
2110025022
2588
Number
RIP CORD SMALL
Specification
DRAWING NO. ADRDE/282(e)
Manufacturing Technology
As Per Drawing / Specification
Testing / Inspection Facility
As Per Drawing / Specification
2110005018
1234
Number
TOWING RING 20MM.ID
Description
TOWING RING 20MM.ID ADRDE/1402-02-002
Specification
DRG.NO.ADRDE/1402-02-002.
Drawing no.
DRG.NO.ADRDE/1402-02-002.
Testing / Inspection Facility
2110025023
22356
Number
COIL SPRING (I.CODE 2110025024
Description
DRNG. NO.ADRDE/1402-03-002
Specification
DRNG. NO.ADRDE/1402-03-002
Drawing no.
DRNG. NO.ADRDE/1402-03-002
Testing / Inspection Facility
2110025024
2882
Number
GROMMET WITH WASHER (13.5 MM)
Description
DRAWING NO. ADRDE/1402-03-003
Specification
DRAWING NO. ADRDE/1402-03-003
Testing / Inspection Facility
2110025025
2715
Number
PACKING PIN DRG. NO. ADRDE/ 1402-05
Description
ADRDE/1402-05
Specification
DRG. NO. ADRDE/ 1402-05
Drawing no.
DRG. NO. ADRDE/ 1402-05
Testing / Inspection Facility
2110025027
1234
Number
ALUMINIUM TUBE
Description
AS PER SPECIFICATION
Specification
DRG. NO.ADRDE/1402-08
Drawing no.
DRG. NO.ADRDE/1402-08
Testing / Inspection Facility
2110025028
1234
Number
POYURETHENE SHEET 2MM THICK
Description
AS PER SPECIFICATION
Specification
AS PER PARTICULARS THICKNESS=2.00 +0.01MM.-0.00MM DENSITY-0.025+-0.002MM
Testing / Inspection Facility
2110025026
790
Number
DENTRITE ADHESIVE
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
SPECIFICATION : IS:9827-1981
Testing / Inspection Facility
1003165400
430
Number
TOGGLE WOODDEN
Description
SPECN. NO. ADRDE/1283/A1(a),SHEET NO.19 of 80
Specification
SPECN. NO. ADRDE/1283/A1(a),SHEET NO.19 of 80
Testing / Inspection Facility
2110021014
2610
Number
NIV RIP CORD HANDLE FOR PTA R WITH DOUBLE STOPPER BALL
Description
NIV RIP CORD HANDLE FOR PTA-R WITH DOUBLE STOPPER BALL
Specification
CQA(GS)/US/564
Manufacturing Technology
As per specification/drawing
Testing / Inspection Facility
As per specification/drawing
2110008017
1994
Number
NIV PACK OPENING SPRING ELASTIC EYE
Description
NIV PACK OPENING SPRING ELASTIC EYE
Specification
NIV PACK OPENING SPRING ELASTIC EYE
Manufacturing Technology
AS PER DRAWING/SPECIFICATION
Testing / Inspection Facility
AS PER DRAWING/SPECIFICATION
2110008012
34861
Number
RIP CORD HANDLE PTAR WITH DOUBLE STOPPER BALL (I CODE-8009)
Description
SPECN-ADRDE/PAS/2004/01(a)
Specification
SPECN-ADRDE/PAS/2004/01(a)
Testing / Inspection Facility
2110008009
2662
Number
NIV GROMMET 8MM WITH WASHER STAINLESS STEEL
Description
NIV GROMMET 8MM WITH WASHER STAINLESS STEEL
Specification
DRAWING NO. CQA(GS)/US/561
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110008013
32759
Number
NIV WASHER FOR LOOP PACK CLOSING
Description
DRAWING NO. CQA(GS)/US/559
Specification
DRAWING NO. CQA(GS)/US/559
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2110008011
25264
Number
A4/5315-004372 LOCKING PIN FOR SNAP HOOK FOR PP TYPE PTR-R 7.30M
Description
As per Specification
Specification
SPCN.NO.IND/GS/1826(a)
Testing / Inspection Facility
2110340003
9408
Number
PACK OPENING SPRING ELASTIC 440 MM
Description
PACK OPENING SPRING ELASTIC 440 MM
Specification
SPECIFICATION NO:- IND/GS/1827(a) EXCEPT LENGTH.
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per Specification/drawing
2110061008
4756
Number
PACK OPENING SPRING ELASTIC SHORT 370 MM
Description
PACK OPENING SPRING ELASTIC SHORT 370 MM
Specification
SPECIFICATION NO.IND/GS/1827(a) EXCEPT LENGTH.
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per Specification/drawing
2110061007
9312
Number
NIV PACK FRAME
Description
NIV PACK FRAME
Specification
DRAWING NO.CQA(GS)/US/557 except that :- Drg sheet No. 2 of 3 Dtd :24.04.2019
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2110008014
3605
Number
5430-006726 SNAP HOOK FOR PARACHUTE TYPE PTR-R
Description
SPCN.NO.IND/GS/1815 (b)
Specification
SPCN.NO.IND/GS/1815 (b)
Testing / Inspection Facility
2110008501
9408
Number
Sub Assy of Spring for Auxiliary Spring PTAR Parachute
Description
Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute
Specification
CQA(GS)/US/563
Testing / Inspection Facility
2110080016
4666
Number
RUBBER BAND 13mm WIDTH 61 MM LONG
Description
SPECN. NO.ADRDE/1106-A-4-(a) (SHEET NO. 22)
Specification
SPECN. NO.ADRDE/1106-A-4-(a) (SHEET NO. 22)
Testing / Inspection Facility
2101682182
308304
Number
FOAM SHEET THICKNESS 5.5 + -0.5 MM & DENCITY 0.0385 GM/Q.CM
Description
SPEPCN/DRG. NO. Drg.no.ADRDE/1460-03-04 AND AS PER PARTICULARS
Specification
SPEPCN/DRG. NO. Drg.no.ADRDE/1460-03-04 AND AS PER PARTICULARS
Testing / Inspection Facility
2101221220
4666
Number
POLYTHENE SHEET THICKNESS 2.05 + -0.05 MM,DENSITY 0.91 gm/ qubic cm
Description
SPECN/DRG.NO. Drg. no.ADRDE/1460-03-04 And as per particulars
Specification
SPECN/DRG.NO. Drg. no.ADRDE/1460-03-04 And as per particulars
Drawing no.
SPECN/DRG.NO. Drg. no.ADRDE/1460-03-04 And as per particulars
Testing / Inspection Facility
2101626627
4666
Number
SNAP HOOK STATIC LINE PTR M WITH SAFETY PIN
Description
SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN
Specification
DRAWING NO JSS: 5340-05:2014
Drawing no.
DRAWING NO JSS: 5340-05:2014
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2110017018
3781
Set
CANOPY RELEASE ASSEMBLY WITH WIRE LOOP
Description
CANOPY RELEASE ASSEMBLY WITH WIRE LOOP SPCN. DRAWING NO.: ADRDE/1233(a)
Specification
SPCN. DRAWING NO.: ADRDE/1233(a)
Testing / Inspection Facility
2110021012
8896
Number
METALLIC SLIDE FASTENER HEAVY DUTY 457 MM LONG OG
Description
METALLIC SLIDE FASTENER HEAVY DUTY 457M LONG OG
Specification
SPECH. NO.: IS : 3148
Testing / Inspection Facility
2111659013
9492
Number
SNAP HOOK QUICK EJECTOR
Description
SPCN.NO.ADRDE/1210(b)
Specification
SPCN.NO.ADRDE/1210(b)
Drawing no.
ADRDE/1210(b)
Testing / Inspection Facility
2110061002
13313
Number
NIV TRIANGULAR D RING
Description
NIV TRIANGULAR D RING
Specification
DRAWING NO. CQA(GS)/US/560
Testing / Inspection Facility
2010020005
7610
Number
NIV BUCKLE V SHAPED WITH SLIDING BAR
Description
AS PER SPECIFICATION
Specification
DRAWING NO. CQA(GS)/US/562
Testing / Inspection Facility
2010020006
13759
Number
CANOPY RIGGING LINK DETACHABLE PTR M DS CAT NO 1670 000320
Description
CANOPY RIGGING LINK DETACHABLE PTR M DS CAT NO 1670 000320
Specification
CANOPY RIGGING LINK DETACHABLE PTR M DS CAT NO 1670 000320
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2110017010
22766
Number
A4/5340-006721 BUCKLE WAIST ADJUSTABLE ADOPTER (SLIDING BAR TYPE) PTRM
Description
SPECN.NO.IND/GS/1802
Specification
SPECN.NO.IND/GS/1802
Testing / Inspection Facility
2102064015
8474
Number
BUCKLE PACK OUTER(PTRM)
Description
SPECN.NO.IND/GS/1795
Specification
SPECN.NO.IND/GS/1795
Testing / Inspection Facility
2102062825
3781
Number
BUCKLE D SHAPED (PTR-M)
Description
SPECN.NO.IND/GS/1798
Specification
SPECN.NO.IND/GS/1798
Testing / Inspection Facility
2102053921
7658
Number
POLYURETHENE FOAM 25 MM THICK WIDTH 91.4CM
Description
SPECIFICATION NO. IS:7933-1975.
Specification
SPECIFICATION NO. IS:7933-1975.
Testing / Inspection Facility
2101226192
610
Number
A4/1670-000125 TRIANGULAR "D" RING FOR CARGO PARACHUTE
Description
SPECIFICATION NO. JSS:1670-03-2011(REV NO.2 )
Specification
SPECIFICATION NO. JSS:1670-03-2011(REV NO.2 )
Drawing no.
JSS:1670-03-2011(REV NO.2 )
Testing / Inspection Facility
2110025003
57457
Number
16722
4070/PV/MTA/4 Core Fiber Optic Cable D link Make
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
16723
3183000833
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Barrel Cover Assembly for JVPC Consisting of Barrel Cover Moulding and Bush Barrel Cover
Description
Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover
Specification
Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover
Drawing no.
DRG. No. 0204-03-03-01-12-000-00DB
Testing / Inspection Facility
70
439
Number
16724
3183000832
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
GAS CYLINDER COVER MOULDING FOR JVPC
Description
GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB
Specification
GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB
Drawing no.
DRG NO. 0204-03-02-00-00-001-00DB
Testing / Inspection Facility
70
439
Number
16725
3183000831
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Wheel Rear Sight for JVPC through MIM Route
Description
Wheel Rear Sight DRG No.0204-03-04-00-01-003-00DA for JVPC 5.56mm (MIM Route)
Specification
Wheel Rear Sight DRG No.0204-03-04-00-01-003-00DA for JVPC 5.56mm (MIM Route)
Drawing no.
DRG No. 0204-03-04-00-01-003-00DA
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.given drawing 2-Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
439
Number
16726
ORDFYS/OCFAV/18-19/PV/03/042ADV1819
Ordnance Clothing Factory Avadi
The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
CLOTH DRILL COTTON NAVY BLUE 142 CMS V NO 4 MINIMUM EXCLUDING SELVEDGES NHQ
Description
CLOTH DRILL COTTON NAVY BLUE 142 CMS (V.NO.4) MINIMUM EXCLUDING SELVEDGES (NHQ).
SPECIFICATION : IS: 177-1989 (IVTH REVISION) REAFFIRMED 2014 CONFIRMING TO V. NO.4
Specification
SPECIFICATION : IS: 177-1989 (IVTH REVISION) REAFFIRMED 2014 CONFIRMING TO V. NO.4
Testing / Inspection Facility
21
4,070.00
Metre
16727
ORDFYS/OCFAV/18-19/PV/03/041ADV1819
Ordnance Clothing Factory Avadi
The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
16728
3183000830
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Rod Front Spring Recoil for JVPC
Description
Rod Front Spring Recoil for JVPC 5.56MM DRG. No. 204-03-02-00-06-003-00DD
Specification
Rod Front Spring Recoil for JVPC 5.56MM DRG. No. 204-03-02-00-06-003-00DD
Drawing no.
204-03-02-00-06-003-00DD
Testing / Inspection Facility
70
1097
Number
16729
116MMETT19003742 (B20181926)
Ordnance Factory Kanpur
The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
PACKING BOX FOR EXPORT ORDER
Description
PACKING BOX TO DRG.NO.COT SK-2984 REV.C FOR DISPATCH OFFINISH 155MM X 52 CAL. BARREL AGAINST EXPORT ORDER.,
Testing / Inspection Facility
67
3
Number
16730
OPF/ADVANCE VR/EOI/JANUARY-19/FLOAT ITEMS
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
CHARGING VALVE EV-55 WITHOUT FLANGE ASSEMBLY
Description
SPECIFICATION NO. CQAE/5420/1561-2002 & CONNECTED DRGS EXCEPT FLANGE ASSEMBLY
Specification
SPECIFICATION NO. CQAE/5420/1561-2002 & CONNECTED DRGS EXCEPT FLANGE ASSEMBLY
Testing / Inspection Facility
2010990827
848
Number
CLAMPING BUCKLE FOR SADDLE STRAP Cat Part No 14 5420 000152
Description
DRAWING NO.: IMPD-0947
Specification
DRAWING NO.: IMPD-0947
Drawing no.
DRAWING NO.: IMPD-0947
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2010990466
13651
Number
TOLUOLE INDUSTRIAL
Description
SPECIFICATION NO. IS : 536-1968
Specification
SPECIFICATION NO. IS : 536-1968
Testing / Inspection Facility
1001772800
26040
Kilogram
FRENCH CHALK TECHNICAL
Description
SPCEN.NO.IS:380
Specification
SPCEN.NO.IS:380
Testing / Inspection Facility
1001097100
651
Number
POLYCHLOROPRENE PROOFED NYLON FAB.STRIP TYPE A 20MM WIDE KK7
Description
IND/ENG/PROV/1221/a
Specification
IND/ENG/PROV/1221/a
Testing / Inspection Facility
2103725560
52080
Metre
POLYCHLOROPRENE PROOFED NYLON FABRIC STRIP TYPE “B” 50 MM WIDE KK-7
Description
SPECIFICATION NO.: IND/ENG/PROV/1221/a
Specification
SPECIFICATION NO.: IND/ENG/PROV/1221/a
Testing / Inspection Facility
2103725530
10850
Metre
EYELET ALUMINIUM ALLOY NO 28 TURN OVER CHEMICALLY PASSIVATEED WITH WASHER
Description
SPCEN :- IS:4084-1978 (Ist Rev) (amdt.NO.2)-REAFFIRMED 2007 AND SUPP. SCHL. NO.CQA(GS)/SS/335. CAT.NO. 5325-000169
Specification
SPCEN :- IS:4084-1978 (Ist Rev) (amdt.NO.2)-REAFFIRMED 2007 AND SUPP. SCHL. NO.CQA(GS)/SS/335. CAT.NO. 5325-000169
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2111602228
23436
Number
NYLON SEWING THREAD SUPER HEAVY OLIVE GREEN CONFORMING TO SPECN
Description
SPECN. NO. IND/ENG/PROV/1222
Specification
SPECN. NO. IND/ENG/PROV/1222
Testing / Inspection Facility
2101781318
89
Kilometer(km)
NYLON FILAMENT ROPE OG 16MM DIA. IN MULTIPLE ROLL LENGTH OF 32.00 METRE
Description
IND/ENG/PROV/0732(a)
Specification
IND/ENG/PROV/0732(a)
Testing / Inspection Facility
2101681816
14080
Metre
PATCH ROUND WITH D RING Cat Part No 14 5420 000068
Description
PATCH ROUND WITH D RING Cat/Part No. 14/5420-000068
Specification
SPECIFICATION NO: IND/ENG/PROV/1180/C &
DRAWING NO: IMPD - 0942/B and IMPD - 0943/B
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2010990469
7046
Number
NYLON SADDLE STRAP OG 50 MM WIDE 2 MM THICK
Description
SPECIFICATION NO. IND/ENG/PROV/1244/a CAT.PT.NO. 14/5420-000222
Specification
SPECIFICATION NO. IND/ENG/PROV/1244/a CAT.PT.NO. 14/5420-000222
Testing / Inspection Facility
1020718050
24955
Number
FABRICATION OF NUMBER PLATE IN BILINGUAL IDENTIFICATION LABEL FOR KM FLOAT
Description
SPECN-DRG.NO.IMPD-0928/1
NOTE-PLATES WILL BE PREPARED AFTER COMBINATION OF SERIAL NO. PLATES WILL BE PREPARED AFTER CONFIRMATION OF SERIEL NO.& YEAR 05 MTR.FROM FLOAT SHOP OF OPF
Specification
SPECN-DRG.NO.IMPD-0928/1
NOTE-PLATES WILL BE PREPARED AFTER COMBINATION OF SERIAL NO. PLATES WILL BE PREPARED AFTER CONFIRMATION OF SERIEL NO.& YEAR 05 MTR.FROM FLOAT SHOP OF OPF
Drawing no.
DRG.NO.IMPD-0928/1
Testing / Inspection Facility
2510094049
1272
Number
RUBBING PROTECTION STRIP For Float 12000x50x5 mm.
Description
IND/ENG/PROV/1170/c, Drawing No. ISK:0791/C
Specification
IND/ENG/PROV/1170/c, Drawing No. ISK:0791/C
Drawing no.
Drawing No. ISK:0791/C
Testing / Inspection Facility
2103726023
3542
Number
RUBBING PROTECTION STRIP For Float 3350x50x5 mm.
Description
IND/ENG/PROV/1170/b Drawing No. ISK:0791/C
Specification
IND/ENG/PROV/1170/b Drawing No. ISK:0791/C
Drawing no.
Drawing No. ISK:0791/C
Testing / Inspection Facility
2103726022
1736
Number
RUBBING PROTECTION STRIP For Float 3450x50x5 mm.
Description
IND/ENG/PROV/1170/b Drawing No. ISK:0791/C
Specification
IND/ENG/PROV/1170/b Drawing No. ISK:0791/C
Drawing no.
Drawing No. ISK:0791/C
Testing / Inspection Facility
2103726021
1736
Number
RUBBING PROTECTION STRIP For Float 3480x50x5 mm.
Description
IND/ENG/PROV/1170/b Drawing No. ISK:0791/C
Specification
IND/ENG/PROV/1170/b Drawing No. ISK:0791/C
Drawing no.
Drawing No. ISK:0791/C
Testing / Inspection Facility
2103726020
1736
Number
CIRCULAR BRASS SHEET 1.5 MM THICK X 30 MM DIA
Description
SPEC./DRG. NO. IMPD-0928/A
Specification
SPEC./DRG. NO. IMPD-0928/A
Testing / Inspection Facility
2103055062
1320
Number
CORD NYLON 6mm DIA OG
Description
SPECIFICATION NO: IND/ENG/PROV/1222.
Specification
SPECIFICATION NO: IND/ENG/PROV/1222.
Testing / Inspection Facility
2101114156
27610
Metre
PATCH OVAL WITH TRAPEZOIDAL RING
Description
PATCH OVAL WITH TRAPEZOIDAL RING Cat/Part No. 14/5420-000070
Specification
SPECIFICATION NO. : IND/ENG/PROV/1180/c DRAWING NO. : IMPD – 0945/c & IMPD-0946/B.
Drawing no.
IMPD-0945/c & IMPD-0946/B
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per Specification/drawing
2010990471
14972
Number
PATCH RUBBER WITH HANDLE
Description
PATCH RUBBER WITH HANDLE SPCN.-IND/ENG/PROV/1180/c
Specification
IND/ENG/PROV/1180/c
Manufacturing Technology
As per drawing /specification
Testing / Inspection Facility
As per drawing /specification
2010990470
13211
Number
Cat Part No 14 5420 000105 CRAMP FOR SADDLE STRAP
Description
DRAWING NO.: IMPD-0948/A
Specification
DRAWING NO.: IMPD-0948/A
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2010990194
13651
Number
PACKING CASE FOR FLOAT INTERNAL DIMENSIONS 1900 X 1150 X 900 mm
Description
SPECN:-IMPD-0962/A
Specification
SPECN:-IMPD-0962/A
Testing / Inspection Facility
1469901603
466
Number
ADHESIVE TYPE B
Description
ADHESIVE TYPE -B
Specification
IND/ENG/PROV/1193/d
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
1003260420
4907
Kilogram
ADHESIVE TYPE A
Description
ADHESIVE TYPE -A
Specification
SPECIFICATION NO: IND/ENG/PROV/1193/d-2004
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
1003260410
25427
Kilogram
CHARGING VALVE EV-55
Description
USED FOR FLOAT
Specification
Specification No.: CQAE/5420/1561-2002.& CONNECTED DRGS. DRAWING NO.: IMSA-0153/D(SHEET 1 OF 2),IMSA-0153/C(SHEET 2 OF 2),IMSA-0154/A,0155/D(3DRGS.),IMPD-0929/B,0930/B,0931, 0932/B,0934/C,0935/A,0936/B,0938/A,0939/B,0940/B(10 DRGS) DRG.NO.IM-0649/B,0650/D-(2 DRGS)GPD-0733/A,0734/A,0735/A, 0736/A,0737/B,0738/B,0739/B,0740/B(8 DRGS). DRG-NO.GGA-0086/A,0087/A,0088/A,0089/B(4 DRGS) TOTAL -27 DRGS.
Drawing no.
IMSA-0153/D(SHEET 1 OF 2),IMSA-0153/C(SHEET 2 OF 2),IMSA-0154/A,0155/D(3DRGS.),IMPD-0929/B,0930/B,0931, 0932/B,0934/C,0935/A,0936/B,0938/A,0939/B,0940/B(10 DRGS) DRG.NO.IM-0649/B,0650/D-(2 DRGS)GPD-0733/A,0734/A,0735/A, 0736/A,0737/B,0738/B,0739/B,07
Testing / Inspection Facility
2010990825
7792
Number
FABRIC CHLOROPRENE PROOFED NY KK 200
Description
POLYCHLOROPRENE COATED NYLON FABRIC SINGLE TEXTURE KK-200 130 CMS. WIDE.
SPECIFICATION NO. :CQAE/9320/1372/f
Specification
SPECN.NO.: CQAE/9320/1372/f
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221206
19919
Metre
FABRIC CHLOROPRENE PROOFED NY KK 600
Description
POLYCHLOROPRENE COATED NYLON FABRIC DOUBLE TEXTURE KK-600 130 CMS. WIDE.
SPECIFICATION NO. :CQAE/9320/1372/f
Specification
SPECIFICATION NO. :CQAE/9320/1372/f
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221205
51931
Metre
16731
OPF/ADVANCE VR/EOI/JANUARY-19/PACKING ITEMS
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
POLYTHENE BAGS SIZE 90 CMS X 75 CMS MADE FROM 0.04 MM THICKNESS
Description
SPECIFICATION NO. : CQA(GS)/SS/540 & IS: 2508-1984
Specification
SPECIFICATION NO. : CQA(GS)/SS/540 & IS: 2508-1984
Testing / Inspection Facility
2510025001
47194
Number
Boxes Corrugated card board 56x56x56 cm 7Ply
Description
Boxes Corrugated card board 56x56x56 cm 7Ply
Specification
CAT/Part No. A-4/8115-000265, ECAD Box- Cargo Aerial Delivery Corrugated Card Board Size 560 mm x 560 mm x 560 mm as per IND/GS/1537(g).
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
1469000234
2446
Number