SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
4-WEIGHT MAX-1120 GMS/100 METERS.
5-BREAKING STRENGTH-MIN.405 KGS ON FULL WIDTH 20 CMS STRIPS
Specification
SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
4-WEIGHT MAX-1120 GMS/100 METERS.
5-BREAKING STRENGTH-MIN.405 KGS ON FULL WIDTH 20 CMS STRIPS
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
9911022279
3036
Metre
16162
3183000888
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Spring Steel Wire dia 1.1MM for Striker Mechanism, Material Spec IV.STA 3 or 4 or IS:4454:2001,SL or BS:1408:1964. 1408-C for Spring as per Drg. ANO.NAD 7606/5
Specification
Spring Steel Wire dia 1.1MM for Striker Mechanism, Material Spec IV.STA 3 or 4 or IS:4454:2001,SL or BS:1408:1964. 1408-C for Spring as per Drg. ANO.NAD 7606/5
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
01
89
Kilogram
16163
2018000172
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges.
Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.
Specification
Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges.
Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody of the Controller, CQAT&C, Kanpur.
Sampling plan and criteria of conformity.
As per anexure 11 (TC-8).
SPECIFICATION :-
NO.OF SPINDLES----------------16
NO. OF ENDS-------------------16
NO.OF PLAITS/dm------------36/37
WEIGHT/Mtr.----------------8.5 gms.(MAX).
TEX OF YARN----------------93.4 X 4
B.S. IN NEWTON-------------3600-N (MIN).
SPECIFICATION :-
NO.OF SPINDLES------------16
NO.OF ENDS----------------32
NO.OF PLAITS-------------45/56
NO.OF CORES----------------2
TEX OF YARN--SEATH = 96.5 X 1
--CORE = 96.5 X 4
B.S. IN NEWTON (15 Cms.BETWEEN GRILLS)--1800-N(MIN)
TYPE-----------------BRAIDED.
MASS/100 M (In Gms.)------475 (MAX).
Specification No. ADRDE/SPECN/71(a) Except that : The revised linear density of Warp yarn will be Type I-840x4 & Type II-840x2 or Type I-1680x2 & Type II-1680x1.
Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3
CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWEEN GRIP)= 250 KG (MIN) PERCENTAGE ELONGATION AT BREAK=26 TO 28;WEAVE=BRAIDED TWIST PER MTR.(TPM)
300+-20(SINGLE) 270+-20(PLY) 250+-20(CABLE
SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C,Kanpur.
SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria for conformity and packing & marking as per CQAT&C/QAS/TC-8/10(a
Specification
SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria for conformity and packing & marking as per CQAT&C/QAS/TC-8/10(a
4020-000298 CORDAGE NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D as per Specification
Specification
SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the material shall conform to the sealed pattern held in the custody of The Controller, CQAT&C, Kanpur (iv) hank length should be 270 + 05. - 00
SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the controller, CQAT&C, KANPUR
(iii)Packing and marking Sampling Plan & Criteria of conformity As per relevant clause of specn.
(iv)Pre inspection, warranty and Advance sample Clause as per specification.
SPECN: WIDTH: 44/(+0/-1)MM THICK:2.7/(+/-0.1MM)WT/MT:79G(MAX)
B.S:2500KG(MIN).NO OF ENDS IN FULL WIDTH FACE&BACK 260 BINDERS-42. PICKS/DM: 240/244 (BOTH LAYER).
CONSTRUCTION OF YARN (TEX X FOLD) WARP 29.6X3X2, WEFT 30X3X2
BINDER-89.3. WEAVE: DOUBLE PLAIN (2ENDS WORKING AS ONE).
TPM RANGE: WARP FACE / BACK (a) FINAL -145 TO 150
(b) INITIAL - 280 TO 320 (c) BINDER -330 TO 340 EXTENSION - 20 - 25%. PROPER HEAT SETTING IS TO BE DONE.
