PRINTED CIRCUIT BOARD Drg No.AL7.104.039 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 32 X 47 MM IN 1.5MM THICKNESS) TO DRG.NO.AL7.104.039 OF VISOR OF 1A43
Specification
PRINTED CIRCUIT BOARD Drg No.AL7.104.039 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 32 X 47 MM IN 1.5MM THICKNESS) TO DRG.NO.AL7.104.039 OF VISOR OF 1A43
PRINTED CIRCUIT BOARD Drg No.AL7.102.786 MIL-PRF-55110G DOUBLE SIDED PC B (APPROX SIZE 60 X 25 MM IN 1.5MM THICKNESS) TO DRG.NO. AL7.102.786 OF VISOR OF 1A43
Specification
PRINTED CIRCUIT BOARD Drg No.AL7.102.786 MIL-PRF-55110G DOUBLE SIDED PC B (APPROX SIZE 60 X 25 MM IN 1.5MM THICKNESS) TO DRG.NO. AL7.102.786 OF VISOR OF 1A43
PRINTED CIRCUIT BOARD Drg No.AL7.103.480 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 72.5 X 40MM IN 1.5MM THICKNESS) TO DRG.NO.AL7 .103.480 OF STABLIZER OF 1A43
Specification
PRINTED CIRCUIT BOARD Drg No.AL7.103.480 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 72.5 X 40MM IN 1.5MM THICKNESS) TO DRG.NO.AL7 .103.480 OF STABLIZER OF 1A43
PRINTED CIRCUIT BOARD Drg No.AL7.103.306 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 70 X 100MM IN 1.5MM THICKNESS) TO DRG.NO.AL7 .103.306 OF STABILIZER OF 1A43
Specification
PRINTED CIRCUIT BOARD Drg No.AL7.103.306 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 70 X 100MM IN 1.5MM THICKNESS) TO DRG.NO.AL7 .103.306 OF STABILIZER OF 1A43
PRINTED CIRCUIT BOARD Drg No.AL7.103.756 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 92 X 35 MM IN 1.5MM THICKNESS) TO DRG.NO.AL7 .103.756 OF STABILIZER OF 1A43
Specification
PRINTED CIRCUIT BOARD Drg No.AL7.103.756 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 92 X 35 MM IN 1.5MM THICKNESS) TO DRG.NO.AL7 .103.756 OF STABILIZER OF 1A43
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
74
47
Number
17122
LPTA/09/2018/02
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
CONTROL SYSTEM TO DRG NO 675 42 CD7 WITHOUT ARTICLE 9P135M1 USE LCSO APPROVED COMPONENT
Specification
ALL THE INFORMATION REGARDING THIS TENDER HAS BEEN UPLOADED IN OFB EPROC WEBSITE www.ofbeproc.gov.in. TENDER ID IS 133MMETT18006002 ANDTENDER NO IS V000431618. PLEASE NOTE THAT THE QUOTATIONS THROUGH E-PROCUREMENT PORTAL ARE ONLY ACCEPTABLE. QUOTATIONS BY POST, HAND, EMAIL, COURIER ETC., ARE NOT ACCEPTABLE. KINDLY ENROLL YOUR FIRM FOR OFMK EPROCUREMENT WEB SITE www.ofbeproc.gov.in IF NOT ENROLLED EARLIER, AND SUBMIT THE QUOTATIONS THROUGH E-PROCUREMENT PORTAL ONLY.PLEASE GO THROUGH THE ATTACHED PDF-IMPORTANT INSTRUCTIONS TO TENDERERS, FOR ALL REQUIRED INFORMATION.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
42
217
Set
17124
O144-18
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
100% POLY. TAPE 25MM (ROLL LENGTH 100M EXCLUDING SAMPLE)
1 Width(mm) 25 mm. Appendix B of IS:3846:1984
2 Mass(gm/mt.) 12(max). Appendix C of IS:3846:1984
3 Ends(in full/width) 85+4/-0. IS:1963
4 Picks/cm. 20+2/-0 (total picks based on two thread working as one) IS:1963
5 Breaking load(20 cm X full width)("KN.") Minimum 2.4 IS:1969
6 Nature of material 100% Polyster. IS:667
7 pH Value(Cold Method) 6 to 8.5 IS:1390
8 % Water soluble matter(max) 1% IS:3456
9 Weave 2/2 Twill weave. Visual
Specification
1 Width(mm) 25 mm. Appendix B of IS:3846:1984
2 Mass(gm/mt.) 12(max). Appendix C of IS:3846:1984
3 Ends(in full/width) 85+4/-0. IS:1963
4 Picks/cm. 20+2/-0 (total picks based on two thread working as one) IS:1963
5 Breaking load(20 cm X full width)("KN.") Minimum 2.4 IS:1969
6 Nature of material 100% Polyster. IS:667
7 pH Value(Cold Method) 6 to 8.5 IS:1390
8 % Water soluble matter(max) 1% IS:3456
9 Weave 2/2 Twill weave. Visual
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101797674
233090
Metre
17138
OFMK/TM/OTE/ V000431618
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
AS PER PARTICULAR =WIDTH=94 CM
A.P.35+_5 Cuft/Sqft/Sec at 10"WHP
Weight/Sq.Metre=115-117 Gram
Thread /cm-Warp-28,WEft-25
Tex of Yarn
Tex x Fold-Warp-9.4x2,Weft-9.5x2
B.S.in Kg-Warp-53kg(min)
Weft-53kg(min.)
Weave-Plain
Finish-Grey Merecerised
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101221967
2942
Metre
17140
2018000153
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
IS:1461-1984 Second Revision (Reaffirmed-2003) and Supplementary Scheduled no. CQA (GS)/SS/346(b)
Except that: (i) Material shall be polyester.
(ii) Design & Dimensions: As per Drawing Enclosed (Drg. No. OCFAV/Button/002).
(iii) In app. Feel, Finish and all other resp. not defi. in this spec. Button shall confirm to the corres. sealed sample held in the cust. of the contro. customer service centre, OCF Avadi.
TRANSFORMER TOT 7 Drg No.OUUO.472.010TU TRANSFORMER TOT 7 AS PER SPECN. NO.OUUO.472.010 TU NOTE-SUPPLY SHOULD NOT BE MOR E THAN 2 YEARS OLD FROM THE PLACEMENT OF SUPPLY ORDER
Specification
TRANSFORMER TOT 7 Drg No.OUUO.472.010TU TRANSFORMER TOT 7 AS PER SPECN. NO.OUUO.472.010 TU NOTE-SUPPLY SHOULD NOT BE MOR E THAN 2 YEARS OLD FROM THE PLACEMENT OF SUPPLY ORDER
STRAIGHT FLEX PCB WITH LENGTH Drg No.CDR.TI(MK-II)T-72/EL/FLEX PCB/ STRAIGHT FLEX PCB WITH LENGTH 115MM FOR CDR. TI SIGHT OF TAN K T-72 (BEL PART NO. 170000397 449) (DELIVERABLE AS PER ATTECHED OLF SHEET NO. CDR. TI (MK- II)T-72/EL/FLEX PCB/01(R)
Specification
STRAIGHT FLEX PCB WITH LENGTH Drg No.CDR.TI(MK-II)T-72/EL/FLEX PCB/ STRAIGHT FLEX PCB WITH LENGTH 115MM FOR CDR. TI SIGHT OF TAN K T-72 (BEL PART NO. 170000397 449) (DELIVERABLE AS PER ATTECHED OLF SHEET NO. CDR. TI (MK- II)T-72/EL/FLEX PCB/01(R)
VIDEO PROCESSING ELECTRONICS Drg No.CDR.TI(MK-II)T-72/EL/VPE/01(R) VIDEO PROCESSING ELECTRONICS F OR CDR. TI SIGHT OF TANK T-72 (BEL PART NO. 170000402008) (D
ELICERABLES AS PER ATTECHED OL F SHEET NO. CDR. TI(MK-II)T-72 /EL/VPE/01(R)
Specification
VIDEO PROCESSING ELECTRONICS Drg No.CDR.TI(MK-II)T-72/EL/VPE/01(R) VIDEO PROCESSING ELECTRONICS F OR CDR. TI SIGHT OF TANK T-72 (BEL PART NO. 170000402008) (D
ELICERABLES AS PER ATTECHED OL F SHEET NO. CDR. TI(MK-II)T-72 /EL/VPE/01(R)
POWER SUPPLY CONTROL BOARD Drg No.CDR.TI MK-II T-72/EL/PSCB/O1(R POWER SUPPLY CONTROL BOARD INCLUDING EMI/EMC PCB FOR CDR. TISIGHT OF TANK T-72 (BEL PART NO. 170300216592) (DELIVERABLES AS PER ATTECHED OLF SHEET NO . CDR. TI (MK-II) T-72/EL/PSCB /01(R)
Specification
POWER SUPPLY CONTROL BOARD Drg No.CDR.TI MK-II T-72/EL/PSCB/O1(R POWER SUPPLY CONTROL BOARD INCLUDING EMI/EMC PCB FOR CDR. TISIGHT OF TANK T-72 (BEL PART NO. 170300216592) (DELIVERABLES AS PER ATTECHED OLF SHEET NO . CDR. TI (MK-II) T-72/EL/PSCB /01(R)
