COPPER TUBE TO SPECN.GOST B17646-78, GR.M2 IN COLD DRAWNCOND.HAVING STRAIGHT LENGTH 2-3M.MECH.PROPERTIES IN SOFTCOND.AS PER GOST B17646-78,GR.M2 AND CHEMICAL PROPERTIES ASPER GOST 859-78,GR.M2, SIZE:35.00+/-0.15MM O/DX2.5 +/-0.25MMW/T. (GOST B17646-78 & GOST 859-78 IS ATTACHED FOR REFERENCE
Specification
COPPER TUBE TO SPECN.GOST B17646-78, GR.M2 IN COLD DRAWNCOND.HAVING STRAIGHT LENGTH 2-3M.MECH.PROPERTIES IN SOFTCOND.AS PER GOST B17646-78,GR.M2 AND CHEMICAL PROPERTIES ASPER GOST 859-78,GR.M2, SIZE:35.00+/-0.15MM O/DX2.5 +/-0.25MMW/T. (GOST B17646-78 & GOST 859-78 IS ATTACHED FOR REFERENCE
Hot rolled and Cold – hardened sized steel of grade 50 to spcTY-14-1-2884-80 with chem. comp, as per table 1,Inclusion rating as per clause no. 2.6 of the specn. Grain size 5 to 8& mech. properties as per spcn.GOST V(B)10230-75,Table 5, Size Steel rod 32 (+0.0/-0.16)dia in straight length of 2-3M
Specification
Hot rolled and Cold – hardened sized steel of grade 50 to spcTY-14-1-2884-80 with chem. comp, as per table 1,Inclusion rating as per clause no. 2.6 of the specn. Grain size 5 to 8& mech. properties as per spcn.GOST V(B)10230-75,Table 5, Size Steel rod 32 (+0.0/-0.16)dia in straight length of 2-3M
BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN.BS:970 EN-56D HARDENED AND TEMPERED TO T CONDITIONOR BS:970 EN-57 OR EN-58 HAVING ST.LENGTH OF 2 TO 3 METRESSIZE: 10 -0.05 MM DIA
Specification
BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN.BS:970 EN-56D HARDENED AND TEMPERED TO T CONDITIONOR BS:970 EN-57 OR EN-58 HAVING ST.LENGTH OF 2 TO 3 METRESSIZE: 10 -0.05 MM DIA
CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN. BS:970 GRADE EN-56D/57/58 IN "T" CONDITION WITH MIN. UTSOF 696 MPA HAVING ST. LENGTH OF 3 TO 4 METRES. SIZE :- 8.00-0.08 MM DIA.
Specification
CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN. BS:970 GRADE EN-56D/57/58 IN "T" CONDITION WITH MIN. UTSOF 696 MPA HAVING ST. LENGTH OF 3 TO 4 METRES. SIZE :- 8.00-0.08 MM DIA.
BRASS ROUND TO SPECN BS EN 12164:1998 SYMBOL CuZn 39Pb3(NUMBER CW 614 N) MATERIAL CONDITION R 430 IN STRAIGHT LENGTOF 2 TO 3 METERS SIZE : 15.00 +/- 0.1 MM DIA
Specification
BRASS ROUND TO SPECN BS EN 12164:1998 SYMBOL CuZn 39Pb3(NUMBER CW 614 N) MATERIAL CONDITION R 430 IN STRAIGHT LENGTOF 2 TO 3 METERS SIZE : 15.00 +/- 0.1 MM DIA
HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN.BS:970 PT.I-1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR. WITH 10% SHORTS DOWN TO 2 - 3 METRES SIZE: 7.5 - 0.05 MM DIA.
Specification
HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN.BS:970 PT.I-1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR. WITH 10% SHORTS DOWN TO 2 - 3 METRES SIZE: 7.5 - 0.05 MM DIA.
CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS970(PART1) 1983 GRADE 080M40 TO "R" CONDITION WITH MINIMUM UTS 686 MPAAND IN STRAIGHT LENGTH OF 3 TO 4 METRESSIZE: 4.00 - 0.08 MM DIA
Specification
CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS970(PART1) 1983 GRADE 080M40 TO "R" CONDITION WITH MINIMUM UTS 686 MPAAND IN STRAIGHT LENGTH OF 3 TO 4 METRESSIZE: 4.00 - 0.08 MM DIA
ALUMINIUM ALLOY STRIP TO BS 1470- HS 14 OR HS 15 CONDITION W OR BS 1470 NS 4-1/2 H OR NS 5-1/4 H SIZE: 0.5 + 0.03 MMTHICKNESS X 22 MM WIDE IN COIL FORM.
Specification
ALUMINIUM ALLOY STRIP TO BS 1470- HS 14 OR HS 15 CONDITION W OR BS 1470 NS 4-1/2 H OR NS 5-1/4 H SIZE: 0.5 + 0.03 MMTHICKNESS X 22 MM WIDE IN COIL FORM.
BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN.BS:970 EN-56D HARDENED AND TEMPERED TO T CONDITIONOR BS:970 EN-57 OR EN-58 HAVING ST.LENGTH OF 2 TO 3 METRESSIZE: 10 -0.05 MM DIA
Specification
BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN.BS:970 EN-56D HARDENED AND TEMPERED TO T CONDITIONOR BS:970 EN-57 OR EN-58 HAVING ST.LENGTH OF 2 TO 3 METRESSIZE: 10 -0.05 MM DIA
BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 200 TO 250 VPN TOSPECN.BS:970 EN-56 HARDENED AND TEMPERED TO R CONDITION ORBS:970 EN-57 HAVING ST.LENGTH OF 2 TO 3 METRES. SIZE: 3.5 -0.05 MM DIA
Specification
BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 200 TO 250 VPN TOSPECN.BS:970 EN-56 HARDENED AND TEMPERED TO R CONDITION ORBS:970 EN-57 HAVING ST.LENGTH OF 2 TO 3 METRES. SIZE: 3.5 -0.05 MM DIA
CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN. BS:970 GRADE EN-56D/57/58 IN "T" CONDITION WITH MIN. UTSOF 696 MPA HAVING ST. LENGTH OF 3 TO 4 METRES. SIZE :- 8.00-0.08 MM DIA.
Specification
CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN. BS:970 GRADE EN-56D/57/58 IN "T" CONDITION WITH MIN. UTSOF 696 MPA HAVING ST. LENGTH OF 3 TO 4 METRES. SIZE :- 8.00-0.08 MM DIA.
CONV.OF CARBON STEEL ROUND BAR SIZE:32.5 -0.1MM DIA TO SPECN BS:970-PT-I-1983 GR.080M40 (I/C:0142003032) IN STRAIGHT LENGTH OF 2 TO 3 MTR.(10% MAX SHORTS DOWN TO 1.5 MTRS. PERM ITTED) BY GRINDING & PEELING INTO 28 +/-0.05MM WITH STRAIGHT -NESS LESS THAN OR EQUAL TO 0.3MM PER METER LENGTH.
Specification
CONV.OF CARBON STEEL ROUND BAR SIZE:32.5 -0.1MM DIA TO SPECN BS:970-PT-I-1983 GR.080M40 (I/C:0142003032) IN STRAIGHT LENGTH OF 2 TO 3 MTR.(10% MAX SHORTS DOWN TO 1.5 MTRS. PERM ITTED) BY GRINDING & PEELING INTO 28 +/-0.05MM WITH STRAIGHT -NESS LESS THAN OR EQUAL TO 0.3MM PER METER LENGTH.
CONVERSION OF STEEL ROUND BAR TO SIZE:25 +/-0.1 MM DIAAGAINST ITEM CODE: 0334008025 INTO 11-0.05 MM DIA WITH ENDCHAMFERING 3 MM IN 45 DEGREE AND STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM PER METER LENGTH BY PEELING & GRINDING.
Specification
CONVERSION OF STEEL ROUND BAR TO SIZE:25 +/-0.1 MM DIAAGAINST ITEM CODE: 0334008025 INTO 11-0.05 MM DIA WITH ENDCHAMFERING 3 MM IN 45 DEGREE AND STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM PER METER LENGTH BY PEELING & GRINDING.
BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 340 TO 390 BHN TO SPECN BS 970 EN-56 HARDENED AND TEMPERED TO X CONDITION ORBS:970 EN-25 OR EN-24 HARDENED AND TEMPERED TO X CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES. SIZE: 11 -0.05 MM DIA
Specification
BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 340 TO 390 BHN TO SPECN BS 970 EN-56 HARDENED AND TEMPERED TO X CONDITION ORBS:970 EN-25 OR EN-24 HARDENED AND TEMPERED TO X CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES. SIZE: 11 -0.05 MM DIA
CONV.OF CARBON STEEL ROUND BAR SIZE:32.5 -0.1MM DIA TO SPECN BS:970-PT-I-1983 GR.080M40 (I/C:0142003032) IN STRAIGHT LENGTH OF 2 TO 3 MTR.(10% MAX SHORTS DOWN TO 1.5 MTRS. PERM ITTED) BY GRINDING & PEELING INTO 28 +/-0.05MM WITH STRAIGHT -NESS LESS THAN OR EQUAL TO 0.3MM PER METER LENGTH.
Specification
CONV.OF CARBON STEEL ROUND BAR SIZE:32.5 -0.1MM DIA TO SPECN BS:970-PT-I-1983 GR.080M40 (I/C:0142003032) IN STRAIGHT LENGTH OF 2 TO 3 MTR.(10% MAX SHORTS DOWN TO 1.5 MTRS. PERM ITTED) BY GRINDING & PEELING INTO 28 +/-0.05MM WITH STRAIGHT -NESS LESS THAN OR EQUAL TO 0.3MM PER METER LENGTH.
CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS-970(PT-1) 1983 GRADE 080M40 IN "R"CONDITION HAVING MINIMUM UTS OF 696MPA,HARDNESS 200 TO 250 VPN IN STRAIGHT LENGTH OF 2 TO 3 MTRWITH 10% SHORTS DOWN TO 1.5 METRES SIZE: 19.00 +/- 1 MM DIA
Specification
CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS-970(PT-1) 1983 GRADE 080M40 IN "R"CONDITION HAVING MINIMUM UTS OF 696MPA,HARDNESS 200 TO 250 VPN IN STRAIGHT LENGTH OF 2 TO 3 MTRWITH 10% SHORTS DOWN TO 1.5 METRES SIZE: 19.00 +/- 1 MM DIA
ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TO SPECIFICATION BS:1474 HE-15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2.5 METRES SIZE:23.50 -0.052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR
Specification
ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TO SPECIFICATION BS:1474 HE-15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2.5 METRES SIZE:23.50 -0.052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR
ALUMINIUM ALLOY ROUND BAR TO SPECIFICATION BS:1474:1987GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2 TO2.5 METRES AND PERIPHERIAL GRAIN GROWTH OF MAXIMUM 3.00 MMON RADIUS TO SIZE: 28 MM +/- 0.32 MM.
Specification
ALUMINIUM ALLOY ROUND BAR TO SPECIFICATION BS:1474:1987GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2 TO2.5 METRES AND PERIPHERIAL GRAIN GROWTH OF MAXIMUM 3.00 MMON RADIUS TO SIZE: 28 MM +/- 0.32 MM.
COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN. IS:736(LATEST ISSUE) GRADE 65032 IN "M" CONDITION (TEST PIECE TO BE TESTED IN "WP" CONDITION) MATERIAL SHOULD BE CAPABLE FOR FLOW TURNING.SIZE:-9.5 +/- 0.2MM THICK X 914MM WIDE X 2438MM LONG.
Specification
COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN. IS:736(LATEST ISSUE) GRADE 65032 IN "M" CONDITION (TEST PIECE TO BE TESTED IN "WP" CONDITION) MATERIAL SHOULD BE CAPABLE FOR FLOW TURNING.SIZE:-9.5 +/- 0.2MM THICK X 914MM WIDE X 2438MM LONG.
ALUMINIUM ALLOY CIRCULAR DISC (MFD. FROM COLD ROLLED PLATE) TO SPECN.IS:736-1986(REF.2001)65032 IN W or WP COND.OR BS:1470 HS-20 OR HS-30 IN W or WP COND.TEST PIECE SHALL BE TESTEDIN "WP CONDITION. MATERIAL SHOULD BE ABLE TO GET FLOW-TURNEDSIZE:150 +/- 2 MM DIA.X 9.52 +/- 0.2 MM THICK.
Specification
ALUMINIUM ALLOY CIRCULAR DISC (MFD. FROM COLD ROLLED PLATE) TO SPECN.IS:736-1986(REF.2001)65032 IN W or WP COND.OR BS:1470 HS-20 OR HS-30 IN W or WP COND.TEST PIECE SHALL BE TESTEDIN "WP CONDITION. MATERIAL SHOULD BE ABLE TO GET FLOW-TURNEDSIZE:150 +/- 2 MM DIA.X 9.52 +/- 0.2 MM THICK.
STEEL GROUND ROUND BARS TO SPECN: BS:970-1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METERSTO SIZE:19.00 -0.052 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR
Specification
STEEL GROUND ROUND BARS TO SPECN: BS:970-1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METERSTO SIZE:19.00 -0.052 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR
CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA
Specification
CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA
CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.
Specification
CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.
HOT ROLLED COLD DRAWN CARBON STEEL ROUND TO SPECN BS:970-PT-I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 3 METRES(10 %MAX.SHORT DOWN TO 2-3 METRES PERMITTED) SIZE:17.00-0.08MM DIA
Specification
HOT ROLLED COLD DRAWN CARBON STEEL ROUND TO SPECN BS:970-PT-I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 3 METRES(10 %MAX.SHORT DOWN TO 2-3 METRES PERMITTED) SIZE:17.00-0.08MM DIA
CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA
Specification
CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA
CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.
Specification
CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.
CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN.BS970 (PART-I)1983GRADE 410S21 (EN56A)WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA
Specification
CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN. BS970 (PART-I)1983 GRADE 410S21 (EN56A) WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA