Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges.
Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.
Specification
Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges.
Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11
Specification
NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11
No. PROV/S/2599/TC-11/2009/01, Except That Clause No. 6.1 & 6.2 Which shall be suitable yarn count may be used in warp & weft in 3/1 twill weave to meet the functional & other constructional parameter along with feel & Finish & Clause no.16.1 which shall be as per schedule No.CQA(T&C)/P&M/35(d), except that the fabric shall be supplied in roll form only.
Specification
No. PROV/S/2599/TC-11/2009/01, Except That Clause No. 6.1 & 6.2 Which shall be suitable yarn count may be used in warp & weft in 3/1 twill weave to meet the functional & other constructional parameter along with feel & Finish & Clause no.16.1 which shall be as per schedule No.CQA(T&C)/P&M/35(d), except that the fabric shall be supplied in roll form only.
SPECN: AS PER APPENDIX 'C' OF PROV.
SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG
(Imp)RELEVANT CLAUSE OF SPECIFICATION
NO. IND/TC/1208 AS PER SPECIFICATION NO.
IND/TC/1208
Specification
SPECN: AS PER APPENDIX 'C' OF PROV.
SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG
(Imp)RELEVANT CLAUSE OF SPECIFICATION
NO. IND/TC/1208 AS PER SPECIFICATION NO.
IND/TC/1208
STEEL PIPE O/D 100.00MM +/-0.50MM X I/D 78.00MM +/-0.50MM,
THE PIPE SHOULD BE 1.9 MTRS OR ITS MULTIPLE LENGTH, TO
MATERIAL SPECN: BS 970-PT-1-1983, GD 708 M40 OR 709 M40.
CONDITION`T'
Specification
STEEL PIPE O/D 100.00MM +/-0.50MM X I/D 78.00MM +/-0.50MM,
THE PIPE SHOULD BE 1.9 MTRS OR ITS MULTIPLE LENGTH, TO
MATERIAL SPECN: BS 970-PT-1-1983, GD 708 M40 OR 709 M40.
CONDITION`T'
Drawing no.
Manufacturing Technology
STEEL PIPE O/D 100.00MM +/-0.50MM X I/D 78.00MM +/-0.50MM
STEEL PIPE O/D 100.00MM +/-0.50MM X I/D 78.00MM +/-0.50MM,
THE PIPE SHOULD BE 1.9 MTRS OR ITS MULTIPLE LENGTH, TO
MATERIAL SPECN: BS 970-PT-1-1983, GD 708 M40 OR 709 M40.
CONDITION`T'
STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS
IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81
Specification
STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS
IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81
ST.SQ.125MM TO SPCN.BS:3S 144-1995(1999)GD. S144`D' TEST
CONDN.S144 H.SHOULD BE OF FORGING QUALITY,ULTRASONICALLY
AND MACRO TESTED AND BE FREE FROM SURFACE DEFECTS.
Specification
ST.SQ.125MM TO SPCN.BS:3S 144-1995(1999)GD. S144`D' TEST
CONDN.S144 H.SHOULD BE OF FORGING QUALITY,ULTRASONICALLY
AND MACRO TESTED AND BE FREE FROM SURFACE DEFECTS.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
70
185
Kilogram
15297
180300GLPO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
STEEL ROUND 150 MM DIA.TO SPECN:BS:3S144:1995,(1999) GRADE-
S144"D" ESR/VAR,SULPHUR-0.015MAX,PHOSPHOROUS-0.03MAX
INCLUSION RATING SHOULD NOT EXCEED THE FOLLOWING
SECONDARY RETINING STEEL ESR/VAR AS PER IS:4163-1982.
Specification
STEEL ROUND 150 MM DIA.TO SPECN:BS:3S144:1995,(1999) GRADE-
S144"D" ESR/VAR,SULPHUR-0.015MAX,PHOSPHOROUS-0.03MAX
INCLUSION RATING SHOULD NOT EXCEED THE FOLLOWING
SECONDARY RETINING STEEL ESR/VAR AS PER IS:4163-1982.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
70
352
Kilogram
15298
180294GLPO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
POLYTHENE WEATHER PROOF PROTECTIVE BAG FOR CARTG. CASE 130MM TO DRG. NO. CC130/SK/0007/C DT 24/02/2004 SHEET NO.1/1 AMENDED UPTO 16/06/2016 TO SPECN. JSS:9330-03-2014, REV. NO.3, LDPE GRADE TYPE 1.
Specification
POLYTHENE WEATHER PROOF PROTECTIVE BAG FOR CARTG. CASE 130MM TO DRG. NO. CC130/SK/0007/C DT 24/02/2004 SHEET NO.1/1 AMENDED UPTO 16/06/2016 TO SPECN. JSS:9330-03-2014, REV. NO.3, LDPE GRADE TYPE 1.
POLYTHENE PROTECTIVE BAG AS PER MATL. LDPE GRADE TYPE 1 TO SPECN JSS 9330-03:2007 REV NO.2 FOR 84MM CG CC OF SIZE LENGTH 440-450 MM, DIA 110, LAY FLAT 173(+10,-0), THICKNESS 0.26-0.06 AS PER DRG. NO. CG84/SK/11003/C DT 14/11/2010 AMENDED UPTO 12/10/2012.
Specification
POLYTHENE PROTECTIVE BAG AS PER MATL. LDPE GRADE TYPE 1 TO SPECN JSS 9330-03:2007 REV NO.2 FOR 84MM CG CC OF SIZE LENGTH 440-450 MM, DIA 110, LAY FLAT 173(+10,-0), THICKNESS 0.26-0.06 AS PER DRG. NO. CG84/SK/11003/C DT 14/11/2010 AMENDED UPTO 12/10/2012.
BEARING 6-24, GOST 8338-75, SINGLE ROW BALL BEARING SIZE 4X13X5MM, OPEN TYPE, CLASS OF ACCURACY-6,TECHNICAL REQUIREMENT AS PER GOST 520-71, L.F.NO.7440020006
Specification
BEARING 6-24, GOST 8338-75, SINGLE ROW BALL BEARING SIZE 4X13X5MM, OPEN TYPE, CLASS OF ACCURACY-6,TECHNICAL REQUIREMENT AS PER GOST 520-71, L.F.NO.7440020006
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
74
353
Number
15308
OFAJ/MFCC/RS/MAR2019
Ordnance Factory Ambajhari
The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021
PHENOLIC RESIN PR-100 WS GRADE OFABR ORGANICS OR EQUIV. ISROGR. WITH VISCOSITY 150 TO 350 CP AT 30 DEGREE & SPECIFICGRAVITY 1.12 TO 1.16 AT 30 DEGREE C,SOLID CONTENT 60 TO 65%POINT OF TROUBLE 6 TO 12 CC
Specification
PHENOLIC RESIN PR-100 WS GRADE OFABR ORGANICS OR EQUIV. ISROGR. WITH VISCOSITY 150 TO 350 CP AT 30 DEGREE & SPECIFICGRAVITY 1.12 TO 1.16 AT 30 DEGREE C,SOLID CONTENT 60 TO 65%POINT OF TROUBLE 6 TO 12 CC
SOAP SOFT IN THE FORM OF FLAKES TO DGQA SPCN IND/SL/3021 (C) PACKED IN WATER PROOF BAGS OF 20 KG CAPACITY, FOR LUBRICATION IN DEEP DRAW PROCESS OF VARIOUS TYPES OF CARTG.CASES & CUPS.
Specification
SOAP SOFT IN THE FORM OF FLAKES TO DGQA SPCN IND/SL/3021 (C)
"Design, manufacturing, testing & trial and supply of various type of moulds for Annual requirement quantity: 10 moulds (approx.) and weight of components: 10 gm to 3kgs & materials to be moulded, different types of polymer Granules/powder, virgin or filled", as per scope of work
Specification
"Design, manufacturing, testing & trial and supply of various type of moulds for Annual requirement quantity: 10 moulds (approx.) and weight of components: 10 gm to 3kgs & materials to be moulded, different types of polymer Granules/powder, virgin or filled", as per scope of work
PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY OG 28 CMS
SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION
Specification
PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY OG 28 CMS
SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
