15361
OFD/PV/Electrical&Electronics items
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
QUARTZ HELOGEN LAMPS PRE FOCUS TYPE BI PIN CAP HOLDER OF RATING 200W
Description
QUARTZ HELOGEN LAMPS PRE-FOCUS TYPE (BI-PIN CAP HOLDER)OF RATING 200W 6.6A (IMPORTED)
Specification
QUARTZ HELOGEN LAMPS PRE-FOCUS TYPE (BI-PIN CAP HOLDER)OF RATING 200W 6.6A (IMPORTED)
Testing / Inspection Facility
15
500
Number
LED RED WATER CLEAR PACKAGE WITH ADAPTER
Description
LED RED WATER CLEAR PACKAGE WITH ADAPTER DIA.3MM X LENGTH 4.5MM. INTENSITY MATCHED STANDARD DIFFUSED, IR.MAX-30MA,IR.TYPICAL-10MA,VR.MAX-5V, PD.MAX-120MW,VIEWING ANGLE-55 DEGREE. OPERATING TEMP.-55 TO 100 DEGREE CENTG. NOTE:SAMPLE APPROVAL REQD.BEFORE SUPPLY.
Specification
LED RED WATER CLEAR PACKAGE WITH ADAPTER DIA.3MM X LENGTH 4.5MM. INTENSITY MATCHED STANDARD DIFFUSED, IR.MAX-30MA,IR.TYPICAL-10MA,VR.MAX-5V, PD.MAX-120MW,VIEWING ANGLE-55 DEGREE. OPERATING TEMP.-55 TO 100 DEGREE CENTG. NOTE:SAMPLE APPROVAL REQD.BEFORE SUPPLY.
Testing / Inspection Facility
15
15000
Number
LAMP ELEC MES CLEAR SPECN BS 941
Description
LAMP ELEC.3.5V 0.525W,MES CLEAR SPECN.BS-941
Specification
LAMP ELEC.3.5V 0.525W,MES CLEAR SPECN.BS-941
Testing / Inspection Facility
15
1500
Number
GUNSIGHT DOUBLE FILAMENT SBC CAP TYPE GASFILLED CAP NAME SMALL BAYONET DESIGN ATION B15D 17 LOW WATTAGE FILAMENT
Description
GUNSIGHT DOUBLE FILAMENT,SBC CAP,TYPE- GASFILLED,CAP:-NAME-SMALL BAYONET,DESIGN ATION-B15D/17 ,LOW WATTAGE FILAMENT:-24V RATED AMPS.0.2,RATED WATTS-1.6W TOLERANS +/-30% AT RATED AMPS,HIGH WATTAGE FILMEN TS:-NOM.CIRCUIT VOLTS 24V,TEST VOLTS 26V 20WATT,EFFCY.9.0,LUMENS180,MIN.LIFE200HR
Specification
GUNSIGHT DOUBLE FILAMENT,SBC CAP,TYPE- GASFILLED,CAP:-NAME-SMALL BAYONET,DESIGN ATION-B15D/17 ,LOW WATTAGE FILAMENT:-24V RATED AMPS.0.2,RATED WATTS-1.6W TOLERANS +/-30% AT RATED AMPS,HIGH WATTAGE FILMEN TS:-NOM.CIRCUIT VOLTS 24V,TEST VOLTS 26V 20WATT,EFFCY.9.0,LUMENS180,MIN.LIFE200HR
Testing / Inspection Facility
15
500
Number
SPEEDOMETER BULB BAYONET TYPE ALLIED
Description
SPEEDOMETER BULB BAYONET TYPE ALLIED MAKE NO.TM532,24V,1.2W
Specification
SPEEDOMETER BULB BAYONET TYPE ALLIED MAKE NO.TM532,24V,1.2W
Testing / Inspection Facility
15
500
Number
LED RED COLOUR 620 625NM WAVELENGTH
Description
LED, RED COLOUR(620-625NM WAVELENGTH) 1.5 TO 3V FORWARD VOLTAGE(DC OPERATING VOLTAGE). TWO TERMINALS ANODE & CATHODE. 3MM DIA & 3MM LENGTH.(LENGTH NOT TO EXCEED.3MM). 150-200MCD LUMINOUS INTENSITY.60° VIEWING ANGLE. OPERATING TEMPERATURE: (-)40 TO (+)85°C. REST OF THE PARAMETERS. CONFORMING TO MILITARY STANDARD.
Specification
LED, RED COLOUR(620-625NM WAVELENGTH) 1.5 TO 3V FORWARD VOLTAGE(DC OPERATING VOLTAGE). TWO TERMINALS ANODE & CATHODE. 3MM DIA & 3MM LENGTH.(LENGTH NOT TO EXCEED.3MM). 150-200MCD LUMINOUS INTENSITY.60° VIEWING ANGLE. OPERATING TEMPERATURE: (-)40 TO (+)85°C. REST OF THE PARAMETERS. CONFORMING TO MILITARY STANDARD.
Testing / Inspection Facility
15
500
Number
RIGID PVC SHEET BLACK COLOUR
Description
RIGID PVC SHEET BLACK COLOUR 12.7MM THICK BCQ. ( IN MULTIPLE WIDTH OF 63.5 MM)
Specification
RIGID PVC SHEET BLACK COLOUR 12.7MM THICK BCQ. ( IN MULTIPLE WIDTH OF 63.5 MM)
Testing / Inspection Facility
15
500
Sq.decimetre
BATTERY CHARGER AC VOLT CHARGER FOR RECHARGEABLE AA SIZE BATTERY TYPE NIMH STANDARD
Description
BATTERY CHARGER(AC VOLT CHARGER) FOR RECHARGEABLE AA SIZE 1.5V BATTERY TYPE:NIMH STANDARD AND SHOULD BE CAPABLE OF CHARGING FOUR NUMBER OF AA BATTERIES AT A TIME. OPERATING VOLTAGE:220V, 50HZ. MAKE-PANASONIC/SONY/ENERGIZER.
Specification
BATTERY CHARGER(AC VOLT CHARGER) FOR RECHARGEABLE AA SIZE 1.5V BATTERY TYPE:NIMH STANDARD AND SHOULD BE CAPABLE OF CHARGING FOUR NUMBER OF AA BATTERIES AT A TIME. OPERATING VOLTAGE:220V, 50HZ. MAKE-PANASONIC/SONY/ENERGIZER.
Testing / Inspection Facility
15
500
Number
RECHARGEABLE BATTERY TYPE NIMH AA SIZE BATTERY CAPACITY 2500 MAH OR ABOVE
Description
RECHARGEABLE BATTERY 1.5V TYPE NIMH, AA SIZE, BATTERY CAPACITY 2500 MAH OR ABOVE, MAKE-PANASONIC/SONY/ENERGIZER.
Specification
RECHARGEABLE BATTERY 1.5V TYPE NIMH, AA SIZE, BATTERY CAPACITY 2500 MAH OR ABOVE, MAKE-PANASONIC/SONY/ENERGIZER.
Testing / Inspection Facility
15
500
Number
15362
MPF/PV/OTE/18TE210533
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
PRESSURE RING FORGING DRG NO FG 765 15 113 3
Description
PRESSURE RING FORGING DRG NO FG 765 15 113 3
Specification
PRESSURE RING FORGING DRG NO FG 765 15 113 3
Drawing no.
DRG NO FG 765 15 113 3
Testing / Inspection Facility
71
666
Number
15363
OLF/MM-2/T-1806010321
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
BUBBLE SPIRIT GLASS LF 7420600009
Description
BUBBLE SPIRIT GLASS
Specification
BUBBLE SPIRIT GLASS, DRG NO. OPT/MISC/360
Drawing no.
DRG NO. OPT/MISC/360
Manufacturing Technology
FIRM NEEDS TO UPLOAD THEIR MANUFACTURING DETAILS FOR THE PRODUCTION OF THE SUBJECT ITEM
Testing / Inspection Facility
FIRM NEEDS TO UPLOAD THEIR MANUFACTURING DETAILS FOR THE PRODUCTION OF THE SUBJECT ITEM
74
2202.00
Number
15364
OLF/MM-2/T-1806010320
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
PROTECTIVE GLASS LF 7440201390
Description
PROTECTIVE GLASS TO DRG. NO. BL4496030
Specification
PROTECTIVE GLASS TO DRG. NO. BL4496030
Testing / Inspection Facility
74
10.00
Number
15365
107MMETT19002575
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
Name
Code
Quantity
Approx Value
Select
VALVE TO DRG NO AO18 03 010 IN FINISHED CONDITION
Description
VALVE TO DRG.NO.A.O.18.03.010 IN FINISHED CONDITION
Specification
AS PER DRAWING
Drawing no.
.A.O.18.03.010
Testing / Inspection Facility
72
9
Number
15366
EOI/PV/J 3/19
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
Name
Code
Quantity
Approx Value
Select
D RING VARIOUS
Description
AS PER REQUIREMENT
Specification
AS PER REQUIREMENT
Testing / Inspection Facility
21
AS PER REQUIREMENT.
Number
15367
170338L7FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
DOUBLE PRESSURE GAUGE TO DRG NO 6110390
Description
DOUBLE PRESSURE GAUGE TO DRG NO 6110390
Specification
DOUBLE PRESSURE GAUGE TO DRG NO 6110390
Drawing no.
DRG NO 6110390
Testing / Inspection Facility
90
63
Number
OIL PRESSURE GAUGE TO CAT PT NO M2 BOF 5051690
Description
OIL PRESSURE GAUGE 0-40 KG/CM SQ. TO CAT/PT NO M2/BOF- 5051690
Specification
OIL PRESSURE GAUGE 0-40 KG/CM SQ. TO CAT/PT NO M2/BOF- 5051690
Drawing no.
CAT/PT NO M2/BOF- 5051690
Testing / Inspection Facility
90
83
Number
OIL PRESSURE GAUGE RANGE TO DRG NO M2 BOF 5053552
Description
OIL PRESSURE GAUGE RANGE 0.25 KG/CM SQ TO DRG NO M2/BOF -5053552
Specification
OIL PRESSURE GAUGE RANGE 0.25 KG/CM SQ TO DRG NO M2/BOF -5053552
Drawing no.
M2/BOF -5053552
Testing / Inspection Facility
90
100
Number
15368
MPF/PV/OTE/18TE210483
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
DRIVEN GEAR FORGING TO DRG NO 175 45 007 F
Description
DRIVEN GEAR FORGING TO DRG NO 175 45 007 F
Specification
DRIVEN GEAR FORGING TO DRG NO 175 45 007 F
Drawing no.
DRG NO 175 45 007 F
Testing / Inspection Facility
39
312
Number
15369
180072BLFO-R1
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
UPPER MOUNTING PLATFORM TO DRG NO GCF AD 230 092
Description
UPPER MOUNTING PLATFORM TO DRG NO GCF/AD/230/092
Specification
UPPER MOUNTING PLATFORM TO DRG NO GCF/AD/230/092
Drawing no.
DRG NO GCF/AD/230/092
Testing / Inspection Facility
90
2
Number
GUN SHIELD DRUM MOD TO DRG NO GCF AD 230 026 MATERIAL TO BE PROVIDED BY GCF
Description
GUN SHIELD (DRUM MOD) TO DRG NO GCF/AD/230/026, MATERIAL TO BE PROVIDED BY GCF
Specification
GUN SHIELD (DRUM MOD) TO DRG NO GCF/AD/230/026, MATERIAL TO BE PROVIDED BY GCF
Drawing no.
DRG NO GCF/AD/230/026
Testing / Inspection Facility
90
2
Number
15370
MPF/PV/OTE/18TE210480
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
INTERMEDIATE GEAR FORGING DRG NO 175 45 005 F
Description
INTERMEDIATE GEAR FORGING DRG NO 175 45 005 F
Specification
INTERMEDIATE GEAR FORGING DRG NO 175 45 005 F
Drawing no.
DRG NO 175 45 005 F
Testing / Inspection Facility
39
501
Number
15371
180181FHPOR1
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
15372
OCFAV/040ADV/18-19/BUTTON POLY
Ordnance Clothing Factory Avadi
The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
Button Polyester 19mm OG
Description
Button Polyester 19mm OG as per drawing No, OCFAV/Button/002 & Specification : IS 1461-1984 second revision (reaffirmed - 2003)
Specification
IS 1461-1984 second revision (reaffirmed - 2003)
Drawing no.
No.OCFAV/Button/002
Testing / Inspection Facility
21
37335
Hundred
15373
ORDFYS/OCFAV/18-19/PV/03/038 DT.09.01.209
Ordnance Clothing Factory Avadi
The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
Cloth Drill Cotton Khaki 142 CM Variety No 3 minimum width Excluding Selvedges
Description
Cloth Drill Cotton Khaki 142 CM Variety No 3 minimum width Excluding Selvedges
Specification
Cloth Drill Cotton Khaki 142 CM Variety No 3 minimum width Excluding Selvedges
SPECIFICATION NO.: VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2014.
Testing / Inspection Facility
21
11800
Metre
15374
107/028/PV(A)/TE 18-628/18-19/75
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
15375
107/028/PV(A)/TE 18-627/18-19/74
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
Name
Code
Quantity
Approx Value
Select
STEEL ROUND 32MM DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN TY 14 1 2884 80
Description
STEEL ROUND 32MM +0.00MM -0.10MM DIA. COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN TY-14-1-2884-80 LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS IN STRAIGHT LONG (CHEMICAL COMPOSITION & MECHANICAL PROPERTIES ETC DETAILS AS ATTACHED LIST HERE WITH - FOR READY REFERENCE ONLY)
Specification
STEEL ROUND 32MM +0.00MM -0.10MM DIA. COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN TY-14-1-2884-80 LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS IN STRAIGHT LONG (CHEMICAL COMPOSITION & MECHANICAL PROPERTIES ETC DETAILS AS ATTACHED LIST HERE WITH - FOR READY REFERENCE ONLY)
Testing / Inspection Facility
03
12715
Kilogram
15376
ORD FYS/OFT/MMR/ADVANCE VR/18-19/06
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
Description
REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
Specification
REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
Drawing no.
TEND :2509*4 (for K-1202*5)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
FRONT SIGHT BLOCK BLANK S3 L F No 7024012072
Description
FRONT SIGHT BLOCK BLANK S3 AS ER DRG No.TEND 2508 (for K 1207)
Specification
AS ER DRG No.TEND 2508 (for K 1207)
Drawing no.
TEND 2508 (for K 1207)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
AUTO SEAR TO DRG NO MIM K 2067 00 TAR
Description
AUTO SEAR TO DRG NO MIM K 2067 00 TAR
Specification
AUTO SEAR TO DRG NO MIM K 2067 00 TAR
Drawing no.
TEND 2517 (for K 2067)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL
Description
SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
Specification
AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
Testing / Inspection Facility
70
5000
Number
SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL
Physical Verification needed
Description
SUPPLY OF GAS PISTON BLANK AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
Specification
AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
Drawing no.
TEND 2547 STAR 5
Testing / Inspection Facility
70
5000
Number
SUPPLY OF EXTRACTOR AS PER DRG NO MIM K 2012 00
Description
SUPPLY OF EXTRACTOR AS PER DRG NO MIM K 2012 00
Specification
AS PER DRG NO MIM K 2012 00
Drawing no.
MIM K 2012 00
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL
Description
SUPPLY OF TRUNNION AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
Specification
AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
Testing / Inspection Facility
70
5000
Number
SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL
Description
SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL
Specification
AS PER DRG. NO. K 2025
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR
Description
LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR
Specification
LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR
Drawing no.
MIM-K-1204-01 (TAR)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL
Description
SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL
Specification
AS PER DRG NO. K 2023
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
15377
ORD FYS/OFT/MMR/ADVANCE VR/18-19/06
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
SUPPLY OF STUD AS PER DRG NO K 1302 WITH FIRMS MATERIAL
Description
SUPPLY OF STUD AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
Specification
AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF DISCONNECTOR AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL
Description
SUPPLY OF DISCONNECTOR AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL
Specification
AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL
Drawing no.
MIM K 2065 00
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
COMPENSATOR AS PER DRG NO MIM K 1021 01 TAR
Description
COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR)
Specification
COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR
Description
PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
Specification
PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR
Description
REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR
Specification
REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR
Drawing no.
MIM-K-2021-01 (TAR)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
BUTT FRAME ASSY AS PER DRG NO K 6006 WITH FIRMS MATERIAL
Description
BUTT FRAME ASSY AS PER DRG NO.K 6006
WITH FIRM’S MATERIAL
Specification
AS PER DRG NO.K 6006
WITH FIRM’S MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO K IC 4007
Description
IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007
Specification
IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG NO K 4011 WITH FIRMS MATERIAL
Description
SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG NO.K-4011 WITH FIRMS MATERIAL.
Specification
AS PER DRG NO.K-4011 WITH FIRMS MATERIAL.
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
FIXED BUTT ASSY AS PER DRG No K3000 STAR WITH FIRMS MATERIAL
Description
FIXED BUTT ASSY AS PER DRG No. K 3000 STAR WITH FIRM'S MATERIAL
Specification
AS PER DRG No. K 3000 STAR WITH FIRM'S MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL
Description
SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL
Specification
AS PER DRG NO K 4110 WITH FIRM'S MATERIAL
Testing / Inspection Facility
70
5000
Number
BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
Description
BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
Specification
BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF PACKING BOX AS PER DRG NO K 9024 WITH FIRMS MATERIAL
Description
SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL
Specification
AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Description
BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Specification
BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Drawing no.
TEND 2383 STAR 8
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
Description
SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
Specification
SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
Description
SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
Specification
SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
Drawing no.
K 2064 STAR 4
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO TEND2450 WITH FIRMS MATERIAL
Description
PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
Specification
AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR
Physical Verification needed
Description
SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR
Specification
AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
15378
ORD FYS/OFT/MMR/ADVANCE VR/18-19/06
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
JACKET CASE FOR 05 MAGAZINES AS PER DRG No K 9023 WITH FIRMS MATERIAL
Description
JACKET CASE FOR 05 MAGAZINES AS PER DRG No K 9023
WITH FIRMS MATERIAL
Specification
AS PER DRG No K 9023
WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL
Description
BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL
Specification
AS PER DRG No K 9022 WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
Description
CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
Specification
CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
Slush Brush
Description
Slush Brush as per Drg. No.: K-9009 with Firm’s Material
Specification
as per Drg. No.: K-9009 with Firm’s Material
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
OIL BOTTLE AS PER DRG No K 9008 WITH FIRMS MATERIAL
Description
OIL BOTTLE AS PER DRG No K 9008 WITH FIRMS MATERIAL
Specification
AS PER DRG No K 9008 WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
Description
SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
Specification
SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
Testing / Inspection Facility
SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
70
5000
Number
SCREW DRIVER AS PER DRG NO K 9006 WITH FIRMS MATERIAL
Description
SCREW DRIVER AS PER DRG NO K 9006 WITH FIRMS MATERIAL
Specification
AS PER DRG NO K 9006 WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
DRIFT AS PER DRG No K 9004 WITH FIRMS MATERIAL
Description
DRIFT AS PER DRG No. K 9004 WITH FIRM'S MATERIAL
Specification
AS PER DRG No. K 9004 WITH FIRM'S MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
BRUSH AS PER DRG No K 9003 STAR WITH FIRMS MATERIAL
Description
BRUSH AS PER DRG No K 9003* WITH FIRMS MATERIAL
Specification
AS PER DRG No K 9003* WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL
Description
CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL
Specification
AS PER DRG No K 9002 WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
CLEANING ROD AS PER DRG No K 9001 WITH FIRMS MATERIAL
Description
CLEANING ROD AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
Specification
AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
MAGAZINE ASSY AS PER DRG No K 7000 WITH FIRMS MATERIAL
Description
MAGAZINE ASSY AS PER DRG No. K 7000 WITH FIRM'S MATERIAL
Specification
AS PER DRG No. K 7000 WITH FIRM'S MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
EXTENDABLE BUTT ASSY AS PER DRG No K 5000 WITH FIRMS MATERIAL
Description
EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL
Specification
AS PER DRG No. K 5000 WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SELECTOR LEVER AS PER DRGNOK 2074 WITH FIRMS MATERIAL
Description
SELECTOR LEVER AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL
Specification
AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
UPPER HAND GUARD ASSY AS PER DRG No K 2050 WITH FIRMS MATERIAL
Description
UPPER HAND GUARD ASSY AS PER DRG No K 2050 WITH FIRMS MATERIAL
Specification
AS PER DRG No K 2050 WITH FIRMS MATERIAL
Testing / Inspection Facility
70
5000
Number
LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Description
LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Specification
LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Drawing no.
K 2040 STAR 7
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL
Description
GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL
Specification
AS PER DRG No K 2031
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL
Description
FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
Specification
AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL
Description
BOLT GRIP PISTOL AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
Specification
AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL
Description
GRIP PISTOL AS PER DRG No.TAR-RB-K-1026 WITH FIRM'S MATERIAL
Specification
AS PER DRG No.TAR-RB-K-1026
Drawing no.
TAR-RB-K-1026
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
15379
ORD FYS/OFT/MMR/ADVANCE VR/18-19/07
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016