NO.-T.S/002/BAG KIT UNIVERSAL DT. 19.12.2016 RUBBER STUD ROUND BLACK SPEC-AS PER ANNEXURE 'C' & DRAWING" OF RELEVANT SPECIFICATION OF BAG KIT UNIVERSAL MARK-II AS PER SPECIFICATION. AS PER SPECIFICATION.
Specification
NO.-T.S/002/BAG KIT UNIVERSAL DT. 19.12.2016 RUBBER STUD ROUND BLACK SPEC-AS PER ANNEXURE 'C' & DRAWING" OF RELEVANT SPECIFICATION OF BAG KIT UNIVERSAL MARK-II AS PER SPECIFICATION. AS PER SPECIFICATION
TS LT. No. TS/002/BAG KIT UNIVERSAL DATE 09.12.16 PRINTED SIZE LABEL 60X45 MM FOR BAG KIT UNIVERSAL (MARK-2) BILINGUAL HINDI & ENGLISH SPCNS-BEST TRADE QUALITY, AS PER SPECIFICATION AS PER SPECIFICATION
Specification
TS LT. No. TS/002/BAG KIT UNIVERSAL DATE 09.12.16 PRINTED SIZE LABEL 60X45 MM FOR BAG KIT UNIVERSAL (MARK-2) BILINGUAL HINDI & ENGLISH SPCNS-BEST TRADE QUALITY, AS PER SPECIFICATION AS PER SPECIFICATION
Drawing no.
Manufacturing Technology
As per the attached file 'Printed Size Label 60x45_norm'
TSLT. NO. TS/002/BAGKITUNIVERSAL DATED 09.12.2019 TAPE NYLON THICK OG OF SIZES FOR BAG KIT UNIVERSAL MARK 2 ONE SET CONSISTS OF TAPE NYLON THICK OG 25 MM ,38 MM& 65 MM.
(A) TAPE NYLON THICK OG 25MM =0.97MTR (B)TAPE NYLON THICK OG 38 MM =5.10 MTR (C)TAPE NYLON THICK OG 65MM =0.32MTR SPECN :DMSRDE/T&GS/92/403 AS PER SPECIFICATION
Specification
TSLT. NO. TS/002/BAGKITUNIVERSAL DATED 09.12.2019 TAPE NYLON THICK OG OF SIZES FOR BAG KIT UNIVERSAL MARK 2 ONE SET CONSISTS OF TAPE NYLON THICK OG 25 MM ,38 MM& 65 MM.
(A) TAPE NYLON THICK OG 25MM =0.97MTR (B)TAPE NYLON THICK OG 38 MM =5.10 MTR (C)TAPE NYLON THICK OG 65MM =0.32MTR SPECN :DMSRDE/T&GS/92/403 AS PER SPECIFICATION
HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'
Specification
HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
As per TE
Metre
15128
ORDFYS/FGK/PV-19/ADV-24
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
NO. TS /10233/10234/TROUSER AND JACKET COMBAT 02062018 OCFAV/FABRIC/005 (CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CM MIN (EXCLUDING SELVEDGE)
Specification
NO. TS /10233/10234/TROUSER AND JACKET COMBAT 02062018 OCFAV/FABRIC/005 (CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CM MIN (EXCLUDING SELVEDGE)
FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE
SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a)
Specification
FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE
SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a)
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 +20MM FOR RG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A'
Specification
ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 +20MM FOR RG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A'
ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN. EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 4850 + 20MM FOR MG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A' 6076450584
Specification
ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN. EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 4850 + 20MM FOR MG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A' 6076450584
ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT-1105 TO DRG NO. IMPD0993, WASHER DIA 11.5 TO DRG. NO.IMPD0994, HEX NUT M-10 TO DRG. NO. IMPD0995 AND LOCK NUT M10 FOR SR. NO. 1 TO DRG. IMPD 0996.
Specification
ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT-1105 TO DRG NO. IMPD0993, WASHER DIA 11.5 TO DRG. NO.IMPD0994, HEX NUT M-10 TO DRG. NO. IMPD0995 AND LOCK NUT M10 FOR SR. NO. 1 TO DRG. IMPD 0996.
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
Oil Micronised Graphite Shell Forging Lubricant as per IS: 14384:1996 (For Heavy Duty Application Under Clause No. 4.3 Table-2); Graphite Content:13 to 15% by Mass Graphite Particle Size: Upto 10 Microns: Minimum 98% Graphite Particle Size Greater Than 60 Microns: Nil
Specification
Oil Micronised Graphite Shell Forging Lubricant as per IS: 14384:1996 (For Heavy Duty Application Under Clause No. 4.3 Table-2); Graphite Content:13 to 15% by Mass Graphite Particle Size: Upto 10 Microns: Minimum 98% Graphite Particle Size Greater Than 60 Microns: Nil
Drawing no.
Manufacturing Technology
Firm should have manufacturing facility for the production of Oil Micronised Graphite Shell Forge Lube Oil.
The firm must have supplied forge lube oil to any Govt. Sector/PSU in last 07 years. The performance certificate of that supply has to be submitted.
Firm should submit details of process followed for manufacturing of the item in the form of process flow Chart.
Firm should submit quality plan for manufacturing of the item for assuring of the quality of the tendered item.
Firm should have enclosed in house facilities for inspection testing or tie up with NABL lab to mesure Viscosity, Ash Content and fixed carbon% in Oil.
IS:1461-1984 Second Revision (Reaffirmed-2003) and Supplementary Scheduled no. CQA (GS)/SS/346(b)
Except that: (i) Material shall be polyester.
(ii) Design & Dimensions: As per Drawing Enclosed (Drg. No. OCFAV/Button/002).
(iii) In app. Feel, Finish and all other resp. not defi. in this spec. Button shall confirm to the corres. sealed sample held in the cust. of the contro. customer service centre, OCF Avadi.
