EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG
Specification
EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG
1) Blast Furnace & LD Converter
(Basic Oxygen Furnace)
OR
Electric Arc Furnace
OR
Induction furnace having
2) Ladle refining furnace along with Argon purging system
3) Vacuum degassing furnace along with argon purging system
4) Continuous casting machine / bottom pouring casting facility. Continuous casting is permitted where applicable
5) Soaking pit / Pre heating furnace
6) Rolling Mill to maintain reduction ratio of 6:1
7) Annealing / Normalizing Furnace
SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY
Specification
SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY
Drawing no.
SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY
Manufacturing Technology
Testing / Inspection Facility
99
1
Number
15691
eLTE No 043/18-19
Ordnance Clothing Factory Avadi
The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
FABRICATION OF PROTECTIVE PANT GREY.
SWO PART II No. 20240/70240.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE
PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED..
FABRICATION OF PROTECTIVE SHIRT GREY HALF SLEEVE.
SWO PART II No. 20239/70239.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE
PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
972
Number
15692
OFAJ/MFCC/HEAT751/FEB2019
Ordnance Factory Ambajhari
The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021
CONVERSION OF ALUMINIUM ALLOY ROD 33.5 MM DIA GR.24345 IN 'WP' CONDITION BY PEELING TO AL.ALLOY ROD 30 MM DIA +/-0.05 MM GR.24345 IN 'WP' CONDITION FOR MFG OF TPT NOSE. WITH STRAIGHTNESS LESS THAN OR EQUAL TO0.3MM PER METER LENGTH.
Specification
CONVERSION OF ALUMINIUM ALLOY ROD 33.5 MM DIA GR.24345 IN 'WP' CONDITION BY PEELING TO AL.ALLOY ROD 30 MM DIA +/-0.05 MM GR.24345 IN 'WP' CONDITION FOR MFG OF TPT NOSE. WITH STRAIGHTNESS LESS THAN OR EQUAL TO0.3MM PER METER LENGTH.
CONVERSION OF STABILIZING TUBE BLANK COLD EXTRUDED AS PER DRG.NO.CG-82 "D" INTO SEMI FINISH STABILIZING TUBE AS PER OFAJ DRG.NO. FS-2919 (BY TURNING, MILLING AND DRILLING OPERATION )
Specification
CONVERSION OF STABILIZING TUBE BLANK COLD EXTRUDED AS PER DRG.NO.CG-82 "D" INTO SEMI FINISH STABILIZING TUBE AS PER OFAJ DRG.NO. FS-2919 (BY TURNING, MILLING AND DRILLING OPERATION )
CONVERSION OF TUBE AL.ALLOY TUBE 67.00 +/- 0.50 MM ID.& 9.2 + 0.9 - 0.00 mm TH.(0613059670) TO TUBE FOR BLANKS TO OFAJ DRG.NO.FS-2914 FOR STABILIZING TUBE.
Specification
CONVERSION OF TUBE AL.ALLOY TUBE 67.00 +/- 0.50 MM ID.& 9.2 + 0.9 - 0.00 mm TH.(0613059670) TO TUBE FOR BLANKS TO OFAJ DRG.NO.FS-2914 FOR STABILIZING TUBE.
Fabrication of Overall Combination Drill Khaki with Pivot Sleeves
Specification
FABRICATION OF OVERALL COMBINATION DRILL KHAKI WITH PIVOT SLEEVES.
SWO PART II No. 20198/70198.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE
PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 68 MM FOR STABILIZING TUBE, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002
Specification
ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 68 MM FOR STABILIZING TUBE, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002
EXTRUDED AND DRAWN AL.ALLOY TUBE TO SPECN.BS:1474-1987 GR. 6082 IN F COND.TO SIZE ID 67.00 MM +/-0.50 MM & O/D 91MM +/- 0.9MM WITH 3MM PGG ON RADIUS HAVING STRAIGHT LENGTH OF 1to3 MTR.ONLY ON THE TEST PIECE SHOULD BE HEAT TREATED TO T6 COND & TESTED TO SATISFY THE CORESPONDING MECHANICAL PROPERTIES.
Specification
EXTRUDED AND DRAWN AL.ALLOY TUBE TO SPECN.BS:1474-1987 GR. 6082 IN F COND.TO SIZE ID 67.00 MM +/-0.50 MM & O/D 91MM +/- 0.9MM WITH 3MM PGG ON RADIUS HAVING STRAIGHT LENGTH OF 1to3 MTR.ONLY ON THE TEST PIECE SHOULD BE HEAT TREATED TO T6 COND & TESTED TO SATISFY THE CORESPONDING MECHANICAL PROPERTIES.
ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" OR BS-1474 1987 GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA.AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS.
Specification
ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" OR BS-1474 1987 GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA.AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS.
CONVERSION OF AL.ALLOY ROUND BAR 21MM DIA +/-0.25 (ITEM CODE :0611505021) BY GRINDING TO AL. ALLOY ROUND BAR 20MM DIA +/-0.05MM WITH STRAIGHTNESS +/-0.2MM PER MTR LENGTH
Specification
CONVERSION OF AL.ALLOY ROUND BAR 21MM DIA +/-0.25 (ITEM CODE :0611505021) BY GRINDING TO AL. ALLOY ROUND BAR 20MM DIA +/-0.05MM WITH STRAIGHTNESS +/-0.2MM PER MTR LENGTH
CONVERSION OF AL.ALLOY ROUND BAR 28 MM DIA TO SPECN.IS:733 - 1983 GR.24345 IN "WP" WITH 8% MIN ELONGATION BY PEELING & GRINDING TO AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH
Specification
CONVERSION OF AL.ALLOY ROUND BAR 28 MM DIA TO SPECN.IS:733 - 1983 GR.24345 IN "WP" WITH 8% MIN ELONGATION BY PEELING & GRINDING TO AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH
ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" 8% MIN ELONGATION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 20 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS
Specification
ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" 8% MIN ELONGATION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 20 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS
DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.
Specification
DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.
ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.
Specification
ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.
25 MM +0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN "M" CONDITION OR (B) BS 1474 - 1987, GR-6082 IN "F" CONDITION OR (C) IS 736-1986, GR-64430 IN "M" CONDITION
Specification
25 MM +0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN "M" CONDITION OR (B) BS 1474 - 1987, GR-6082 IN "F" CONDITION OR (C) IS 736-1986, GR-64430 IN "M" CONDITION