SEWING THREAD SPUN POLYESTER 125 DTEX 3 VARIOUS SHADES OG DARK GREY WHITE SAGE GREEN ETC
Specification
IND/TC/0296(b)
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
Item(1) :Sewing Thread Spun Polyester 125dtex/3 OG (in tubes of 1000 m) - 27740 km and Item(2): Sewing Thread Spun Polyester 125dtex/3 OG (in cones of 5000 m) - 14580 km
Kilometer(km)
HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'
Specification
HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
16362
Metre
14426
128MMETT19001502
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
PCB AU7.820.043 Drg No.AU7820043 PCB(DOUBLESIDED PTH)DRG:AU7.82 0.043 &SPCN:OLF/MSD/PCB/01/MOD CONDITIONS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASE
MATERIAL=GLASS EPOXY BASE,COPP ER CLAD GRADE GF.(3)THICKNESS OF BASE -1.5MM & COPPER FOIL T HICKNESS 50 MICRO MTR. (4) PCB TINPLATED WITH PROVISION OF GR
EEN MASKING(5)SIZE-50X47.5MMSQ
Specification
PCB AU7.820.043 Drg No.AU7820043 PCB(DOUBLESIDED PTH)DRG:AU7.82 0.043 &SPCN:OLF/MSD/PCB/01/MOD CONDITIONS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASE
MATERIAL=GLASS EPOXY BASE,COPP ER CLAD GRADE GF.(3)THICKNESS OF BASE -1.5MM & COPPER FOIL T HICKNESS 50 MICRO MTR. (4) PCB TINPLATED WITH PROVISION OF GR
EEN MASKING(5)SIZE-50X47.5MMSQ
PCB,SIZE 82.37MM X 43MM Drg No.OLF/EPS/TVNE-4B/SMD P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BOARD OF THICKNESS 2 MM AND COPPER FOIL THICKNESS 50 MICROMETER AS PER SPCN.NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301,S IZE 82.37 MM X 43 MM .
Specification
PCB,SIZE 82.37MM X 43MM Drg No.OLF/EPS/TVNE-4B/SMD P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BOARD OF THICKNESS 2 MM AND COPPER FOIL THICKNESS 50 MICROMETER AS PER SPCN.NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301,S IZE 82.37 MM X 43 MM .
PCB SIZE- 61 X 43 MMSQ SMOTP DOUBLE SIDED,PTH,PCB AS PER DRG. NO. OLF/EBU/01, AND SPECN. NO. OLF/MSD/PCB/01/MOD ON GLASS EPOXY BOARD OF THICK- NESS 1.5 MM. AND COPPER FOIL THICKNESS 50 MICROMETER,CONFO-RMING TO JSS-52301, SIZE OF PCB-61 X 43 MMSQ.
Specification
PCB SIZE- 61 X 43 MMSQ SMOTP DOUBLE SIDED,PTH,PCB AS PER DRG. NO. OLF/EBU/01, AND SPECN. NO. OLF/MSD/PCB/01/MOD ON GLASS EPOXY BOARD OF THICK- NESS 1.5 MM. AND COPPER FOIL THICKNESS 50 MICROMETER,CONFO-RMING TO JSS-52301, SIZE OF PCB-61 X 43 MMSQ.
PCB OLF/RMU/COUNTER CARD/RUS PCB FOR RMU SIZE-127MM X 71MM AS PER DRG. NO.OLF/RMU/COUNTER CARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY
BOARD OF THICKNESS 1.5MM AND C OPPER FOIL THICKNESS 50MICROM. CONFIRMING TO SPECIFICATION OL F/MSD/PCB/01/MOD AND JSS-52301
Specification
PCB OLF/RMU/COUNTER CARD/RUS PCB FOR RMU SIZE-127MM X 71MM AS PER DRG. NO.OLF/RMU/COUNTER CARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY
BOARD OF THICKNESS 1.5MM AND C OPPER FOIL THICKNESS 50MICROM. CONFIRMING TO SPECIFICATION OL F/MSD/PCB/01/MOD AND JSS-52301
P.C.B.(BOARD) AF7102187 PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO.AF7.102.187 ON GLASS EPOXY BOARD OF THICKN ESS 1.5 MM AND COPPER FOIL
THICKNESS 35 MICROMETER, AND A S PER SPECIFICATION NO. OLF/MSD/PCB/01/MOD, AND CONFOR M TO JSS-52301, PCB SIZE- 100 X 47 SQMM
Specification
P.C.B.(BOARD) AF7102187 PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO.AF7.102.187 ON GLASS EPOXY BOARD OF THICKN ESS 1.5 MM AND COPPER FOIL
THICKNESS 35 MICROMETER, AND A S PER SPECIFICATION NO. OLF/MSD/PCB/01/MOD, AND CONFOR M TO JSS-52301, PCB SIZE- 100 X 47 SQMM
PCB-SMOTP DOUBLE SIDED PTH PCB-SMOTP DOUBLE SIDED PTH AS PER DRG NO : OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FO
IL THICKNESS 35 MICROMETRE, CONFIRMING TO JSS 52301 AND AS PER SPCEN NO : OLF/MSD/PCB/01/MOD SIZE- 94.5 X 71.63 SQMM
Specification
PCB-SMOTP DOUBLE SIDED PTH PCB-SMOTP DOUBLE SIDED PTH AS PER DRG NO : OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FO
IL THICKNESS 35 MICROMETRE, CONFIRMING TO JSS 52301 AND AS PER SPCEN NO : OLF/MSD/PCB/01/MOD SIZE- 94.5 X 71.63 SQMM
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
90
231
Number
14436
170165FGR1
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
SPECN. NO.: IS:4727-1968 except for :-
i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and
C/QAI/TC-8/7(b).
ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn. the material shall conform to the sealed pattern held in the custody of the Controller,CQAT and C,KANPUR.
iii)PACKING and MARKING : As per schedule No. CIT and C/PMS/41.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101876973
122562.58
Metre
14438
OFMK/COMP/K407618
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
SPECN-NO:-IS:1424 VARIETY NO.2 EXCEPT THE FOLLOWING-(a)MASS AS PER IS:1964 - 950 TO 1200 GM/Sqm.(b) WIDTH AS PER IS:1954 -91 CMS (MIN.) (C)BREAKING STRENGTH AS PER IS:1969 (RAVELLED STRIP METHOD)-193 KGS. (MIN)WARP:-162 KGS(MIN)WEFT.(d)WATER PROOFNESS PRESSURE HEAD TEST-AS PER CLAUSE 3.3.7.1OF.IS:2089 APPENDIX-E SHOULD WITH STAND 30 CM WATER HEAD FOR ONE HOUR.(e)WATER PROOFNESS CONE TEST AS PER CLAUSE 3.3.7.2 IS:2089appendix-A. No leakages on outer wetting
Specification
SPECN-NO:-IS:1424 VARIETY NO.2 EXCEPT THE FOLLOWING-(a)MASS AS PER IS:1964 - 950 TO 1200 GM/Sqm.(b) WIDTH AS PER IS:1954 -91 CMS (MIN.) (C)BREAKING STRENGTH AS PER IS:1969 (RAVELLED STRIP METHOD)-193 KGS. (MIN)WARP:-162 KGS(MIN)WEFT.(d)WATER PROOFNESS PRESSURE HEAD TEST-AS PER CLAUSE 3.3.7.1OF.IS:2089 APPENDIX-E SHOULD WITH STAND 30 CM WATER HEAD FOR ONE HOUR.(e)WATER PROOFNESS CONE TEST AS PER CLAUSE 3.3.7.2 IS:2089appendix-A. No leakages on outer wetting
IMSA-0151/A (IMPD-0385/B,
IMPD-0386/A,
IMPD-0387/A, IMPD-0438,
IMPD-0439,
IMPD-0440/B) and Sprcn No. CQAE/ 1940/1419/a and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/1520(b):2006
Drawing no.
IMSA-0151/A (IMPD-0385/B, IMPD-0386/A, IMPD-0387/A, IMPD-0438, IMPD-0439, IMPD-0440/B) and Sprcn No. CQAE/ 1940/1419/a and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/1520(b):2006