1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
Oil Micronised Graphite Shell Forging Lubricant as per IS: 14384:1996 (For Heavy Duty Application Under Clause No. 4.3 Table-2); Graphite Content:13 to 15% by Mass Graphite Particle Size: Upto 10 Microns: Minimum 98% Graphite Particle Size Greater Than 60 Microns: Nil
Specification
Oil Micronised Graphite Shell Forging Lubricant as per IS: 14384:1996 (For Heavy Duty Application Under Clause No. 4.3 Table-2); Graphite Content:13 to 15% by Mass Graphite Particle Size: Upto 10 Microns: Minimum 98% Graphite Particle Size Greater Than 60 Microns: Nil
Drawing no.
Manufacturing Technology
Firm should have manufacturing facility for the production of Oil Micronised Graphite Shell Forge Lube Oil.
The firm must have supplied forge lube oil to any Govt. Sector/PSU in last 07 years. The performance certificate of that supply has to be submitted.
Firm should submit details of process followed for manufacturing of the item in the form of process flow Chart.
Firm should submit quality plan for manufacturing of the item for assuring of the quality of the tendered item.
Firm should have enclosed in house facilities for inspection testing or tie up with NABL lab to mesure Viscosity, Ash Content and fixed carbon% in Oil.
IS:1461-1984 Second Revision (Reaffirmed-2003) and Supplementary Scheduled no. CQA (GS)/SS/346(b)
Except that: (i) Material shall be polyester.
(ii) Design & Dimensions: As per Drawing Enclosed (Drg. No. OCFAV/Button/002).
(iii) In app. Feel, Finish and all other resp. not defi. in this spec. Button shall confirm to the corres. sealed sample held in the cust. of the contro. customer service centre, OCF Avadi.
PLASTIC SLIDE FASTENERS MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 84 CM
SPECN NO. - IS: 14181(Part 1 to 3 ): AMENDMENT. No.2, March 2008
Specification
PLASTIC SLIDE FASTENERS MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 84 CM
SPECN NO. - IS: 14181(Part 1 to 3 ): AMENDMENT. No.2, March 2008
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
PLASTIC SLIDE FASTENERS MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 81 CM
SPECIFICATION IS:14181()PART 1 TO 3 ): AMDT NO.2,MARCH 2008
Specification
SPECIFICATION IS:14181()PART 1 TO 3 ): AMDT NO.2,MARCH 2008
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
IS.4229-1978 VARIETY NO. H-3 EXCEPT THAT
[1) Elongation at Break shall be 30 % maximum.
[2) Criteria of conformity and sampling plan shall be as per CQAT&C/QAI/TC-8/2.
BOXES SHOULD BE MADE FROM 20MM THICK WELL FINISHED & FREE FROM KNOTS & CRACKS TIMBER CHIR WOOD. SIX SUITABLE STEEL HANDLE SHOULD BE PROVIDED IN THE BOX (TWO LENGTHWISE AND ONE WIDTH WISE ON EACH SIDE). SIZE- 2000MMX700MMX400MM. (INSIDE DIMENSION).