DoO(C&S) Vendor Panel | Page ,3fd9c492b8a183c599a0ae193fe7529731b6b3ec

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofbqcvrcell[dot]ofb[at]ofb[dot]gov[dot]in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

12881

OFD/PV/Raw Material

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity
M S WIRE 10 BG IS 7887 1992 Description M.S WIRE 3.18 MM (10 BG ) IS-7887-1992 Specification M.S WIRE 3.18 MM (10 BG ) IS-7887-1992 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
MILD STEEL WIRE 14 SWG AS PER SPECIFICATION IS 280 1978 Description MILD STEEL WIRE 2.03MM (14 SWG) AS PER SPECIFICATION IS-280/1978 Specification MILD STEEL WIRE 2.03MM (14 SWG) AS PER SPECIFICATION IS-280/1978 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
M S ROD AS PER IS 1570 PART 2 1979 C 15 15C4 Description M.S.ROD 5/8" DIA AS PER IS:1570(PART-2)-1979, C-15 (15C4) Specification M.S.ROD 5/8" DIA AS PER IS:1570(PART-2)-1979, C-15 (15C4) Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram

12882

SAF/MMD/EOI/VR/18-19/3/ESTVENDOR /MAG 7.62MM/1

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity
STEEL ROD 30MM DIA. TO SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' (REQD. FOR FLASH HIDER ) Description STEEL ROD 30MM DIA. TO SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' (REQD. FOR FLASH HIDER ) Specification SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' Drawing no. Manufacturing Technology Testing / Inspection Facility	01	320 Kilogram
STEEL ROD 14 MM DIA IN HOT ROLLED NORMALIZED CONDITION Description SPECN.BS:970 PT-3:1991.GD 817M40 OR 826M40 EST PIECE TO BE TESTED IN `Z' CONDITION. Specification SPECN.BS:970 PT-3:1991.GD 817M40 OR 826M40 TEST PIECE TO BE TESTED IN `Z' CONDITION. Drawing no. SPECN.BS:970 PT-3:1991.GD 817M40 OR 826M40 Manufacturing Technology Testing / Inspection Facility	02	320 Kilogram
STEEL ROD 35 MM DIA Description STEEL RD. 35MM DIA +/- 0.25MM IN HOT ROLLED REELED,PEELED & ANNEALED CONDITION TO SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'.TEST PIECE TO BE TESTED IN 'T' CONDITION.MATERIAL SHOULD ALSO SATISY THE TEST AS PER ANNEXURE 'A' NATURE A ANDSATISFY THE MACHINEABILITY TEST AT OUR END. Specification STEEL RD. 35MM DIA +/- 0.25MM IN HOT ROLLED REELED,PEELED & ANNEALED CONDITION TO SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'.TEST PIECE TO BE TESTED IN 'T' CONDITION.MATERIAL SHOULD ALSO SATISY THE TEST AS PER ANNEXURE 'A' NATURE A ANDSATISFY THE MACHINEABILITY TEST AT OUR END. Drawing no. SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'. Manufacturing Technology Testing / Inspection Facility	03	320 Kilogram
STEEL RD 8MM DIA FOR MAG Description BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C Specification BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C Drawing no. BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C Manufacturing Technology Testing / Inspection Facility	03	320 Kilogram
STEEL RD 45MM DIA IN HOT ROLLED AND ANNELED CONDITION FOR MAG Description SPECNIS:5517-1993 DESIG.42CR4MO2.TEST PIECE TO BE TESTED IN`V' CONDITION.MATL. SHOULD ALSO SATISFY MACRO ETCH & NMIR TEST AS ANNEXURE NATURE-C A SEPERATE T.P. IS TO BE QUENCHED & TEMPERED BEFORE MACHINING TO ACHIEVE HARDNESS 280-335HB. Specification SPECNIS:5517-1993 DESIG.42CR4MO2.TEST PIECE TO BE TESTED IN`V' CONDITION.MATL. SHOULD ALSO SATISFY MACRO ETCH & NMIR TEST AS ANNEXURE NATURE-C A SEPERATE T.P. IS TO BE QUENCHED & TEMPERED BEFORE MACHINING TO ACHIEVE HARDNESS 280-335HB. Drawing no. SPECNIS:5517-1993 DESIG.42CR4MO2 Manufacturing Technology Testing / Inspection Facility	03	320 Kilogram
STEEL RD 25MM DIA FOR MAG Description SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST TO BE CARRIED OUT AS PER ANNEXURE NATURE `C'. (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614) Specification SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST TO BE CARRIED OUT AS PER ANNEXURE NATURE `C'. (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614) Drawing no. SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29 Manufacturing Technology Testing / Inspection Facility	03	320 Kilogram

12883

SAF/MMD/EOI/VR/18-19/3/ESTVENDOR /MAG/2

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity
STEEL ROUND 12MM DIA Description STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250. Specification STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250. Drawing no. Manufacturing Technology Testing / Inspection Facility	04	320 Kilogram
STEEL ROUND 18MM DIA FOR MAG Description SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36 Specification SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36 Drawing no. SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36 Manufacturing Technology Testing / Inspection Facility	01	320 Kilogram
STEEL SQR 37MM FOR MAG Description SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION Specification SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION Drawing no. SPECN.BS:970:PT-1:1983 GD.945M38 I Manufacturing Technology Melting & Rolling 2bfbb806214c615a8eeb486a74be62b0.pdf Testing / Inspection Facility As per attachment 2bfbb806214c615a8eeb486a74be62b0.pdf	03	320 Kilogram
STEEL SQR 37MM FOR MAG Description SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION Specification SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION Drawing no. SPECN.BS:970:PT-1:1983 GD.945M38 I Manufacturing Technology Melting & Rolling 2bfbb806214c615a8eeb486a74be62b0.pdf Testing / Inspection Facility As per attachment 2bfbb806214c615a8eeb486a74be62b0.pdf	03	320 Kilogram
Stem Roller FOR MAG Description STEM ROLLER FOR MAG 7.62 IN FINISHED CONDITION DS CAT NO. 5307-000873 DC (I)NO.27020-SA DT.28.01.17AS PER DRG. Specification STEM ROLLER FOR MAG 7.62 IN FINISHED CONDITION DS CAT NO. 5307-000873 DC (I)NO.27020-SA DT.28.01.17 Drawing no. DS CAT NO. 5307-000873 DC (I)NO.27020-SA DT.28.01.17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
STIRRUP RETAINING FORESIGHT FOR MAG Description STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION. Specification STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION. STIRRUP_RETAINING_FORESIGHT_1005-000424.pdf Drawing no. DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 STIRRUP_RETAINING_FORESIGHT_1005-000424.pdf Manufacturing Technology Machining STIRRUP_RETAINING_FORESIGHT_1005-000424.pdf Testing / Inspection Facility As per drawing STIRRUP_RETAINING_FORESIGHT_1005-000424.pdf	70	320 Number
STOP PIN EJECTOR FOR MAG Description DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. Specification DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
M S ROD 10MM DIA AS PER IS 1570 PART 2 1979 C 15 15C4 Description M.S.ROD 10MM DIA AS PER IS:1570(PART-2)-1979, C-15 (15C4) Specification M.S.ROD 10MM DIA AS PER IS:1570(PART-2)-1979, C-15 (15C4) Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
M S SHEET FE 410 IS 1079 1988 Description M.S. SHEET 1.60MM FE 410 IS:1079-1988 Specification M.S. SHEET 1.60MM FE 410 IS:1079-1988 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
STEEL SHEET 2 MM THICK GDE ISH410S TO IS 5986 2017 Description STEEL SHEET 2.00 MM THICK, GDE- ISH410S TO IS: 5986-2017 Specification STEEL SHEET 2.00 MM THICK, GDE- ISH410S TO IS: 5986-2017 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
COLD ROLLED LOW CARBON STEEL SHEET 1 MM THICK AS PER SPECN IS 513 1994 D OR DD DRAWING QUALITY SIZE 4X8 FEETS Description COLD ROLLED LOW CARBON STEEL SHEET 1.00 MM THICK .AS PER SPECN.IS-513-1994 D OR DD ( DRAWING QUALITY) SIZE-4X8 FEETS. BEST SURFACE,PROPERLY GREASED & PACKED TO AVOID RUSTING DURING TRANSIT. (PACK.SHOULD BE UP TO 2 TONS ONLY) Specification COLD ROLLED LOW CARBON STEEL SHEET 1.00 MM THICK .AS PER SPECN.IS-513-1994 D OR DD ( DRAWING QUALITY) SIZE-4X8 FEETS. BEST SURFACE,PROPERLY GREASED & PACKED TO AVOID RUSTING DURING TRANSIT. (PACK.SHOULD BE UP TO 2 TONS ONLY) Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
CARBON STEEL SHEET 1 MM THICK TO IS 1079 2017 GDE HR1 Description CARBON STEEL SHEET 1 MM THICK TO IS:1079-2017, GDE - HR1 Specification CARBON STEEL SHEET 1 MM THICK TO IS:1079-2017, GDE - HR1 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40. Description STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.TEST PIECE TO BE TESTED AS PER SPECN.MACROETCH & NMIR TEST AS PER STORE DRG. CLEANLINESS TEST A SEPERATE TP TO BE HEAT TREATED TO ACHIEVE HARDNESS 45-61 HRC.T0 BE ULTRASONICALLY TESTED.(REQD.PISTON) Specification SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40. Drawing no. Manufacturing Technology Testing / Inspection Facility	02	320 Kilogram
STEEL RD 12MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40 (REQD.FOR EXTRACTOR PLUNGER OF MAG 7.62MM) Description STEEL RD 12MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40 TEST PIECE TO TESTED AS PER ANNEXURE-A NATURE-C. (REQD.FOR EXTRACTOR PLUNGER OF MAG 7.62MM) Specification SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40 Drawing no. Manufacturing Technology Testing / Inspection Facility	03	320 Kilogram
STEEL FORGINGS FOR BRACKET BACK SIGHT Description STEEL FORGING TO DRG.NO.SKM-3091(BRACKET BACK SIGHT ), Specification STEEL FORGING TO DRG.NO.SKM-3091(BRACKET BACK SIGHT ), Drawing no. DRG.NO.SKM-309*1 Manufacturing Technology Testing / Inspection Facility	01	320 Number
STEEL FORGING FOR LEVER LOCKING FOR MAG Description DRG. NO. SKM-3035 MICRO-ETCH & NMIR TEST AS PER DRG. Specification DRG. NO. SKM-3035 MICRO-ETCH & NMIR TEST AS PER DRG. Drawing no. DRG. NO. SKM-303*5 Manufacturing Technology Testing / Inspection Facility	04	320 Number
STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description DRG.NO.SKM-2812 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. Specification DRG.NO.SKM-2812 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. Drawing no. DRG.NO.SKM-281*2 'NI' Manufacturing Technology Testing / Inspection Facility	04	320 Number
STEEL FLAT 32X11MM FOR MAG Description STEEL FLAT 32X11MM TO SPECN: BS:970: PT-3 1991:GD.835M15 IN HOT ROLLED AND ANNEALED CONDITION REQD. FOR GUIDE FRONT LEFT Specification STEEL FLAT 32X11MM TO SPECN: BS:970: PT-3 1991:GD.835M15 IN HOT ROLLED AND ANNEALED CONDITION REQD. FOR GUIDE FRONT LEFT Drawing no. SPECN: BS:970: PT-3 1991:GD.835M15 Manufacturing Technology Testing / Inspection Facility	04	320 Kilogram
STEEL FLAT 25X32MM Description STEEL FLAT 25X32MM(1"X1-1/4")TO SPECN.BS:970:PT-1:1983 GD.080M40 IN HOT ROLLED & NORMALISED CONDITION. MATL TO BE TESTED AS PER ANNEXURE-C (REQD.FOR BAND FRONT SIGHT OF MAG 7.62MM) Specification STEEL FLAT 25X32MM(1"X1-1/4")TO SPECN.BS:970:PT-1:1983 GD.080M40 IN HOT ROLLED & NORMALISED CONDITION. MATL TO BE TESTED AS PER ANNEXURE-C (REQD.FOR BAND FRONT SIGHT OF MAG 7.62MM) Drawing no. SPECN.BS:970:PT-1:1983 GD.080M40 Manufacturing Technology Testing / Inspection Facility	01	320 Kilogram
MILD STEEL SHEET AS PER IS 513 1994 GRDE DHALF HARD BEST SURFACE FEET Description MILD STEEL SHEET 1.6 MM THICK AS PER IS-513/1994 GRDE-DHALF HARD,BEST SURFACE FEET. THE SHEETS SHOULD BE RUST FREE, PROPRELY GREASED & PACKED TO AVOID RUST- ING DURING TRANSIT.COLD ROLLED AND ANNEALED. Specification MILD STEEL SHEET 1.6 MM THICK AS PER IS-513/1994 GRDE-DHALF HARD,BEST SURFACE FEET. THE SHEETS SHOULD BE RUST FREE, PROPRELY GREASED & PACKED TO AVOID RUST- ING DURING TRANSIT.COLD ROLLED AND ANNEALED. Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
M S FLAT 10 X 25 MM BS 970 EN 3A Description M.S.FLAT 10 X 25 MM [3/8''X1.0''] BS-970/EN-3A Specification M.S.FLAT 10 X 25 MM [3/8''X1.0''] BS-970/EN-3A Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
M S SHEET 18 SWG IS 513 1986 GDE O HARD Description M.S.SHEET 18 SWG IS: 513-1986 GDE-"O" 1/2 HARD Specification M.S.SHEET 18 SWG IS: 513-1986 GDE-"O" 1/2 HARD Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
MILD STEEL SHEET 3 MM THICK SIZE 8X4 AS PER SPECN IS 1079 GDE 42 1079 Description MILD STEEL SHEET 3.00 MM THICK SIZE 8X4 AS PER SPECN.IS-1079, GDE-42 -1079 Specification MILD STEEL SHEET 3.00 MM THICK SIZE 8X4 AS PER SPECN.IS-1079, GDE-42 -1079 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
M S ROD 12MM DIA IS 2073 C 20 IS 2073 1970 Description M.S.ROD 12MM" DIA (1/2" ) IS 2073,C-20 IS 2073-1970 Specification M.S.ROD 12MM" DIA (1/2" ) IS 2073,C-20 IS 2073-1970 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 Kilogram
STEEL FLAT 22X18MM FOR MAG Description SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM) Specification SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM) Drawing no. SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 Array Manufacturing Technology Testing / Inspection Facility	04	320 Kilogram
STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C Description STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907) Specification STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907) ANX_A_NATURE-C-Steel_Flat_17_X_47mm.pdf Drawing no. Manufacturing Technology As per attachment manufacturing_inspection_for_RAW_material.pdf Testing / Inspection Facility As per attachment manufacturing_inspection_for_RAW_material.pdf	03	320 Kilogram
STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT Description STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 3063 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) Specification STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 3063 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) Drawing no. DRG. NO. SKM- 889 Manufacturing Technology Testing / Inspection Facility	70	320 Number
St Forging Cylinder Gas Drg No SKM 306 star 5 Description St Forging Cylinder Gas Drg No SKM 306 star 5 Specification St Forging Cylinder Gas Drg No SKM 306 star 5 Drawing no. SKM 306 STAR 5 Manufacturing Technology Testing / Inspection Facility	01	320 Number
ST FORGING BUFFER BODY FOR MAG Description DRG. NO. SKM-3041 Specification DRG. NO. SKM-3041 Drawing no. DRG. NO. SKM-304*1 Manufacturing Technology Testing / Inspection Facility	01	320 Number
Steel Flat 70X38MM Description SPECN IS:6603-2001;DISIGNATION X12CR12 ORX20CR13. Specification SPECN IS:6603-2001;DISIGNATION X12CR12 ORX20CR13. Drawing no. Manufacturing Technology Testing / Inspection Facility	01	320 Kilogram
ST FLAT 70X34MM IN HOT ROLLED and ANNEALED CONDITION Description ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN Specification ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN Drawing no. Manufacturing Technology As per attachment manufacturing_inspection_for_RAW_material.pdf Testing / Inspection Facility as per attachment NATURE-C_ST_FLAT_70X34.pdf	01	320 Kilogram
STOP SCREW REARSIGHT CURSOR FOR MAG Description DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION. Specification DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 Manufacturing Technology Testing / Inspection Facility	70	320 Number
STUD REAR RETURN SPRING ASSEMBLY FOR MAG Description DS CAT NO. 5320-000957 DC(I) NO. 27014-SA DT-16-01-17 IN FINISHED CONDITION. Specification DS CAT NO. 5320-000957 DC(I) NO. 27014-SA DT-16-01-17 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5320-000957 DC(I) NO. 27014-SA DT-16-01-17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
TELESCOPIC ROD RETURN SPRING Description DS CAT NO. 1005-006845DC(I) NO.25343-SA, DT.26.04.02, Specification DS CAT NO.1005-006845DC(I) NO.25343-SA, DT.26.04.02, Drawing no. DS CAT NO. 1005-006845DC(I) NO.25343-SA, DT.26.04.02, Manufacturing Technology Testing / Inspection Facility	70	320 Number
TOOL ADJUSTING FOR MAG Description DS CAT NO.1005-000766 DC(I) NO.24257-SA DT.14-01-99 IN FINISHED CONDITION. Specification DS CAT NO.1005-000766 DC(I) NO.24257-SA DT.14-01-99 IN FINISHED CONDITION. Drawing no. DS CAT NO.1005-000766 DC(I) NO.24257-SA DT.14-01-99 Manufacturing Technology Testing / Inspection Facility	70	320 Number
St Forging Plate Bottom for MAG Description DRG No. SKM-2832 Specification DRG No. SKM-2832 Drawing no. SKM-283*2 Manufacturing Technology Testing / Inspection Facility	01	320 Number
ST BLANK OF RECEIVER PLATE LEFT AND RIGHT FOR MAG Description ST. BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG. SKM-960* WITH FIRM'S MAT. THE PROFILE & REF HOLES (SHOULDER LOCKING HOLE DIA 13 .39 (+_0.02) & BUSH MOUNTING FRONT HOLE DIA 18.025 (+_0.02) TO BE DONE SIMULT IN BOTH PLATES KEPT TOGETHER ONE ABOVE AND THER & NO. TO MAKE SET DRG. SKM 8842 & SKM-884/13 ENCL Specification AS PER DRG. Drawing no. SKM-960* DRG_STEEL_BLANK_OF_RECEIVER_PLATE.pdf Manufacturing Technology AS PER ENCLOSED manufacturing_inspection_for_RAW_material.pdf Testing / Inspection Facility AS PER ENCLOSED manufacturing_inspection_for_RAW_material.pdf	01	320 Set
SPRING SEAR TRIPPER FOR MAG Description DS CAT NO. 5360-000531 DC (I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. Specification DS CAT NO. 5360-000531 DC (I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5360-000531 DC (I) NO. 27018-SA DT- 27.01.17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPRING HELICAL COMPRESSION FOR MAG Description DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 Specification DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 Drawing no. DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 Manufacturing Technology Testing / Inspection Facility	72	320 Number
SPRING HELICAL COMPRESSION FOR MAG Description DSCAT NO. 5360-000533, DC(I) NO. 26201-SA, DT.17-05-2006 Specification DSCAT NO. 5360-000533, DC(I) NO. 26201-SA, DT.17-05-2006 Drawing no. DSCAT NO. 5360-000533, DC(I) NO. 26201-SA, DT.17-05-2006 Manufacturing Technology Testing / Inspection Facility	72	320 Number
SPRING FOR BOLT COVER SPRING FOR SPINDLE TRIGGER FRAME FOR MAG Description DS CAT NO. 5360-002920 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. Specification DS CAT NO. 5360-002920 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5360-002920 DC(I) NO. 27018-SA DT- 27.01.17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPRING EJECTION OPENING COVER FOR MAG Description DS CAT NO. 5360-000523 DC(I) NO. 25387-SA DT- 07.06.02 IN FINISHED CONDITION. Specification DS CAT NO. 5360-000523 DC(I) NO. 25387-SA DT- 07.06.02 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5360-000523 DC(I) NO. 25387-SA DT- 07.06.02 Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPRING CONTROL FEED ARM FOR MAG Description DS CAT NO.5360-007527 DC(I) NO.27021-SA DT.28.1.17 IN FINISHED CONDITION Specification DS CAT NO.5360-007527 DC(I) NO.27021-SA DT.28.1.17 IN FINISHED CONDITION Drawing no. DS CAT NO.5360-007527 DC(I) NO.27021-SA DT.28.1.17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPRING CIRCLIP FEED PAWL ASSEMBLY FOR MAG Description DS CAT NO. 5365-000386 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. Specification DS CAT NO. 5365-000386 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5365-000386 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPRING CATCH REAR SIGHT CURSOR FOR MAG Description DS CAT NO. 5360-000512 DC(I) NO. 26097-SA DT- 24.9.05 IN FINISHED CONDITION. Specification DS CAT NO. 5360-000512 DC(I) NO. 26097-SA DT- 24.9.05 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5360-000512 DC(I) NO. 26097-SA Manufacturing Technology Testing / Inspection Facility	70	320 Number
TOOL REMOVING RUPTURED CASE FOR MAG Description TOOL REMOVING RUPTURED CASE 7.62MM 1A GEN.ARRANGEMENT TO DRG DS CAT NO.4933-000215 DC(I)NO.24278-SA DT.04-03-99 Specification TOOL REMOVING RUPTURED CASE 7.62MM 1A GEN.ARRANGEMENT TO DRG DS CAT NO.4933-000215 DC(I)NO.24278-SA DT.04-03-99 Drawing no. DRG DS CAT NO.4933-000215 DC(I)NO.24278-SA DT.04-03-99 Drg_1005_000606_trigger_gaurd.pdf Manufacturing Technology Testing / Inspection Facility	70	320 Number
TRAY RH FOR MAG AIR VERSION Description DRG. NO. 3602008194 Specification DRG. NO. 3602008194 Drawing no. DRG. NO. 3602008194 Manufacturing Technology Testing / Inspection Facility	01	320 Number
Trigger guard Description AS PER DRG. Specification AS PER DRG. DS CAT No. 1005-00060 Drawing no. Drg_1005_000606_trigger_gaurd.pdf Manufacturing Technology Machining and anodizing and Dying Manufacturing_Testing_Facility_of_Trigger_Guard.pdf Testing / Inspection Facility Chemical and Mechanical properties as per std.given drawing Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing Manufacturing_Testing_Facility_of_Trigger_Guard.pdf	70	320 Number
Wallet SA Spare Parts and Tools No Description Wallet SA Spare Parts & Tools No 2 MK 1 to DS CAT No 1005-000765 finished condition (4 Shts) Specification Wallet SA Spare Parts & Tools No. 2MK-1 to DS CAT No. 1005-000765 finished condition (4 Shts) _4_shts_Page_1.pdf Drawing no. DS CAT No. 1005-000765 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_1.pdf 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_2.pdf 1005-000765_-_Wallet_SA_spare_p Manufacturing Technology Sewings /Stitching Drawing_of_Wallet_SA_spare_parts_and_Tools_1.pdf Drawing_of_Wallet_SA_spare_parts_and_Tools_2.pdf Drawing_of_Wallet_SA_spare_parts_and_Tools_3.pdf Drawing_of_Wallet_SA_spare_parts_and_Tools_4.pdf Testing / Inspection Facility Chemical and Mechanical prosperities as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing. 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_1.pdf 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_2.pdf 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_3.pdf 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_4.pdf	71	320 Number
WASHER FRONT GUIDE RIGHT FOR MAG Description DS CAT NO 5310-011400 DC(I) NO 27105-SA DT-20/06/2017 IN FINISHED CONDITION. Specification DS CAT NO 5310-011400 DC(I) NO 27105-SA DT-20/06/2017 IN FINISHED CONDITION. WASHER_FRONT_GUIDE_RIGHT_5310-011400.pdf Drawing no. DS CAT NO 5310-011400 DC(I) NO 27105-SA DT-20/06/2017 I WASHER_FRONT_GUIDE_RIGHT_5310-011400.pdf Manufacturing Technology Machining WASHER_FRONT_GUIDE_RIGHT_5310-011400.pdf Testing / Inspection Facility As per drawing WASHER_FRONT_GUIDE_RIGHT_5310-011400.pdf	70	320 Number
WASHER KEY FOR MAG Description DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. Specification DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 Manufacturing Technology Testing / Inspection Facility	70	320 Number
WASHER KEY PART NO 136 Description DS CAT NO. 5310-002667 DC(I) NO. 27106-SA DT.21.06.17 IN FINISHED CONDITION. Specification DS CAT NO. 5310-002667 DC(I) NO. 27106-SA DT.21.06.17 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5310-002667 DC(I) NO. 27106-SA DT.21.06.17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
WASHER KEY WAY FOR MAG Description DS CAT NO. 5310-016270 DC(I) NO. 25363-SA DT- 15/05/2002 IN FINISHED CONDITION Specification DS CAT NO. 5310-016270 DC(I) NO. 25363-SA DT- 15/05/2002 IN FINISHED CONDITION Drawing no. DS CAT NO. 5310-016270 DC(I) NO. 25363-SA 15/05/2002 Manufacturing Technology Testing / Inspection Facility	70	320 Number
WASHER PART NO 502 FOR MAG Description DS CAT NO. 5310-002664 DC(I) NO. 25349-SA DT- 30.4.02 IN FINISHED CONDITION. Specification DS CAT NO. 5310-002664 DC(I) NO. 25349-SA DT- 30.4.02 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5310-002664 DC(I) NO. 25349-SA DT- 30.4.02 Manufacturing Technology Testing / Inspection Facility	70	320 Number
WASHER PLUG FOR MAG Description DS CAT NO. 5310-012252 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. Specification DS CAT NO. 5310-012252 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. WASHER_PLUG_5310-012252.pdf Drawing no. DS CAT NO. 5310-012252 DC(I) NO. 27105-SA DT- 20.06.17 WASHER_PLUG_5310-012252.pdf Manufacturing Technology Machining WASHER_PLUG_5310-012252.pdf Testing / Inspection Facility As per drawing WASHER_PLUG_5310-012252.pdf	70	320 Number
SPRING CATCH COVER IN FINISHED CONDITION FOR MAG Description DS CAT NO.5360 - 003081 DC(I)NO.27018-SA, DT. 27.01.17 Specification DS CAT NO.5360 - 003081 DC(I)NO.27018-SA, DT. 27.01.17 Drawing no. DS CAT NO.5360 - 003081 DC(I)NO.27018-SA, DT. 27.01.17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPRING CATCH BUFFER BODY PART NO 2125 FOR MAG Description DS CAT NO. 5360-002926 DC(I) NO. 25393-SA DT-11.6.2002 IN FINISHED CONDITION. Specification DS CAT NO. 5360-002926 DC(I) NO. 25393-SA DT-11.6.2002 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5360-002926 DC(I) NO. 25393-SA Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPRING CARTRIDGE GUIDE PAWL FOR MAG Description PT.NO.69 DS CAT NO 5360-000518 DC(I) NO.27021-SA DT. 28.01.17 IN FINISHED CONDITION. Specification PT.NO.69 DS CAT NO 5360-000518 DC(I) NO.27021-SA DT. 8.01.17 IN FINISHED CONDITION. Drawing_Spring_Cartridge_Guide_Pawl.pdf Drawing no. DS CAT NO 5360-000518 DC(I) NO.27021-SA DT.28.01.17 Drawing_Spring_Cartridge_Guide_Pawl.pdf Manufacturing Technology Spring Coiling Drawing_Spring_Cartridge_Guide_Pawl.pdf Testing / Inspection Facility Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing Drawing_Spring_Cartridge_Guide_Pawl.pdf	70	320 Number
SPRING CARRYING HANDLE CATCH Description DS CAT NO. 5360-002919 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. Specification DS CAT NO. 5360-002919 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5360-002919 DC(I) NO. 27018-SA DT- 27.01.17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPRING ADJUSTING SCREW FORESIGHT HOUSING BLOCK FOR MAG Description DS CAT NO. 5360-000511 DC(I) NO. 25384-SA DT- 04.06.2002 IN FINISHED CONDITION.AS PER DRG Specification DS CAT NO. 5360-000511 DC(I) NO. 25384-SA DT- 04.06.2002 IN FINISHED CONDITION.AS PER DRG Drawing no. DS CAT NO. 5360-000511 DC(I) NO. 25384-SA DT- 04.06.2002 Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPRING ADJUSTING SCREW FORESIGHT HOUSING BLOCK FOR MAG Description DS CAT NO. 5360-000511 DC(I) NO. 25384-SA DT- 04.06.2002 IN FINISHED CONDITION.AS PER DRG Specification DS CAT NO. 5360-000511 DC(I) NO. 25384-SA DT- 04.06.2002 IN FINISHED CONDITION.AS PER DRG Drawing no. DS CAT NO. 5360-000511 DC(I) NO. 25384-SA DT- 04.06.2002 Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPLIT PIN HOLLOW HALF LINK FOR MAG Description DS CAT NO. 5315-001523 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION Specification DS CAT NO. 5315-001523 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION Drawing no. DS CAT NO. 5315-001523 DC(I) NO. 27020-SA DT-28.01.17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPLIT PIN SOLID HALF LINK PART NO B 32 EC Description DS CAT NO. 5315-001524 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION Specification DS CAT NO. 5315-001524 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION Drawing no. DS CAT NO. 5315-001524 DC(I) NO. 27012-SA DT- 14.01.17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPLIT COLLAR GAS REGULATOR FOR MAG Description SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. Specification SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. Drawing no. DS CAT NO. 1005-000402 DC(I) NO. 25292-SA Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPINDLE REGULATOR FOR MAG Description SPINDLE REGULATOR TO DS CAT NO. 1005-007081 DC(I) NO. 26670-SA DT- 17.4.13 IN FINISHED CONDITION. Specification SPINDLE REGULATOR TO DS CAT NO. 1005-007081 DC(I) NO. 26670-SA DT- 17.4.13 IN FINISHED CONDITION. Drawing no. DS CAT NO. 1005-007081 DC(I) NO. 26670-SA Manufacturing Technology Testing / Inspection Facility	70	320 Number
SPRING COVER CATCH IN FINISHED CONDITION FOR MAG Description DS CAT NO.5360-006984 DC(I)NO.27018-SA DT.27.01.17. Specification DS CAT NO.5360-006984 DC(I)NO.27018-SA DT.27.01.17. Drawing no. DS CAT NO.5360-006984 DC(I)NO.27018-SA DT.27.01.17. Manufacturing Technology Testing / Inspection Facility	70	320 Number
SLEEVE LOCK PIN HEADED FOR MAG Description DS CAT NO. 1005-006846 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. Specification DS CAT NO. 1005-006846 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. Drawing no. DS CAT NO. 1005-006846 DC(I) NO. 27019-SA DT- 28.01.17 Manufacturing Technology Testing / Inspection Facility	70	320 Number
WASHER BRAZING BUSH FOR MAG Description DS CAT NO. 5310-011901 DC(I) NO. 25352-SA DT- 04.5.02 IN FINISHED CONDITION. Specification S CAT NO. 5310-011901 DC(I) NO. 25352-SA DT- 04.5.02 IN FINISHED CONDITION. WASHER _BRAZING_BUSH_5310-011901.pdf Drawing no. DS CAT NO. 5310-011901 DC(I) NO. 25352-SA DT- 04.5.02 WASHER _BRAZING_BUSH_5310-011901.pdf Manufacturing Technology Machining WASHER _BRAZING_BUSH_5310-011901.pdf Testing / Inspection Facility As per Drawing WASHER _BRAZING_BUSH_5310-011901.pdf	70	320 Number
WOODEN CHEST MG2B FOR MAG Description DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001 Specification DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001 Drawing no. DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001 1005_006475_Drg.pdf 1005_006477_1_Drg.pdf 1005_006477_2_Drg.pdf 1005_006477_3_Drg.pdf 1005_006477_4_Drg.pdf Manufacturing Technology Carpentry and related work Manufacturing_Testing_Facility_of_Wooden_Chest.pdf Testing / Inspection Facility Chemical and Mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing. Manufacturing_Testing_Facility_of_Wooden_Chest.pdf	70	320 Number

12884

110180189

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
CONNECTING LUG for PP JAGUAR Description DRG.NO.ADRDE/1339 Specification DRG.NO.ADRDE/1339 Drawing no. DRG.NO.ADRDE/1339 Connecting_Lug_ADRDE_1339.pdf Manufacturing Technology Testing / Inspection Facility	2110075013	200 Number
SLEEVE GAS REGULATOR FOR MAG Description SLEEVE GAS REGULATOR TO DS CAT NO. 3120-004755 DC(I) NO. 25570-SA DT- 29.10.02 Specification SLEEVE GAS REGULATOR TO DS CAT NO. 3120-004755 DC(I) NO. 25570-SA DT- 29.10.02 Drawing no. DS CAT NO. 3120-004755 DC(I) NO. 25570-SA DT- 29.10.02 Array Manufacturing Technology Testing / Inspection Facility	70	320 Number

Proceed