RESISTOR 2.2 KILO OHMS +/-5%,0.5 WATT COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 2.2 KILO OHMS +/-5%,0.5 WATT COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 0.25-2.2K OHM +/- 10%

RESISTOR 0.25-2.2K OHM +/- 10%

RESISTANCE 22 KOHMS,0.25 WATTS NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE 22 KOHMS,0.25 WATTS NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE 47 K OHMS 0.25 WATTS NOTE:SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE 47 K OHMS 0.25 WATTS NOTE:SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE VERIABLE 50 KOHM .5

RESISTANCE VERIABLE 50 KOHM .5

RESISTOR 100 OHMS,0.25 WATTS. NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTOR 100 OHMS,0.25 WATTS. NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE 200 OHMS 0.25 WATTS AND 5 % TOLLERANCE NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE 200 OHMS 0.25 WATTS AND 5 % TOLLERANCE NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RELAY REC 10 ( RC4.529.031.06 ) PCO.452.049TY

RELAY REC 10 ( RC4.529.031.06 ) PCO.452.049TY

TRANSISTOR BEL 100P OA,MAKE:BELL

TRANSISTOR BEL 100P OA,MAKE:BELL

TRANSISTOR BEL 100N 1A,MAKE:BELL

TRANSISTOR BEL 100N 1A,MAKE:BELL

TRANSISTOR - 2T-201 OR CK-100

TRANSISTOR - 2T-201 OR CK-100

TRANSISTOR-2T-203 OR CL-100

TRANSISTOR-2T-203 OR CL-100

STABILIZER DIODE 8145 CM3.62.012TY A2R3 OR ZENER DIODE 8.5 VOLTS/0.5 WATT

STABILIZER DIODE 8145 CM3.62.012TY A2R3 OR ZENER DIODE 8.5 VOLTS/0.5 WATT

LED GREEN COLOUR 5MM DIA X 8MM LONG, INTENSITY MATCHED STANDARD DIFFUSED,IR MAX-30MA,IR TYPICAL-10MA,VR MAX-5V, PD MAX-120 MW,VIEWING ANGLE-55 DEGREE, OPERATING TEMP.=(-)55 DEGREE TO 100 DEGREE CENTIGRADE, COMPONENT SHOULD BE MIL GRADE ONLY.

LED GREEN COLOUR 5MM DIA X 8MM LONG, INTENSITY MATCHED STANDARD DIFFUSED,IR MAX-30MA,IR TYPICAL-10MA,VR MAX-5V, PD MAX-120 MW,VIEWING ANGLE-55 DEGREE, OPERATING TEMP.=(-)55 DEGREE TO 100 DEGREE CENTIGRADE, COMPONENT SHOULD BE MIL GRADE ONLY.

I.R.DIODE TL-38(TO CASING),CLEAR PACKAGE VR.(MAX)-1.7MA,PEAK WAVE LG-940NM, VR.(MAX)-5V,POWER DISSIPATION-100 MW, IF.(MAX)-100 MA,RADIANT POWER-120 MW, OPERATING TEMP-30 TO 70 DEG.CENTG. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

I.R.DIODE TL-38(TO CASING),CLEAR PACKAGE VR.(MAX)-1.7MA,PEAK WAVE LG-940NM, VR.(MAX)-5V,POWER DISSIPATION-100 MW, IF.(MAX)-100 MA,RADIANT POWER-120 MW, OPERATING TEMP-30 TO 70 DEG.CENTG. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

SILICON DIODE IN 4007. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

SILICON DIODE IN 4007. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

DIODE,IR EMITTING,TYPE L 23 47-02 HIMAMATSU OR EQUIVALENT. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

DIODE,IR EMITTING,TYPE L 23 47-02 HIMAMATSU OR EQUIVALENT. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

DIODE OA-5 NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

DIODE OA-5 NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

CONDENSER 22 MF 16

CONDENSER 22 MF 16

LIGHT EMITING DIODE COLOUR GREEN SIZE= DIAMETER 5 MM AND 7 MM LONG

LIGHT EMITING DIODE COLOUR GREEN SIZE= DIAMETER 5 MM AND 7 MM LONG

CONDENSER 4.7 MICRO FARAD, 16V

CONDENSER 4.7 MICRO FARAD, 16V

BATTERY,NON-RECHARGEABLE, 3V, TYPE- CR123/CR123A, LITHIUM, MAKE-PANASONIC/DURACELL/SONY

BATTERY,NON-RECHARGEABLE, 3V, TYPE- CR123/CR123A, LITHIUM, MAKE-PANASONIC/DURACELL/SONY

RECHARGEABLE BATTERY, RCR123/RCR123A/16340, 3.7 VOLT CAPACITY 650 MAH MINIMUM. A SAMPLE OF RECHARGEABLE BATTERY MUST BE SUBMITTED AT THE TIME OF TENDER.

RECHARGEABLE BATTERY, RCR123/RCR123A/16340, 3.7 VOLT CAPACITY 650 MAH MINIMUM. A SAMPLE OF RECHARGEABLE BATTERY MUST BE SUBMITTED AT THE TIME OF TENDER.

BATTERY LITHIUM CELL 3.6 VOLT,SIZE:AA AS PER SPECIFICATION NO.OLF/A-1/SPEC

BATTERY LITHIUM CELL 3.6 VOLT,SIZE:AA AS PER SPECIFICATION NO.OLF/A-1/SPEC

LITHIUM CELL 3.5V SIZE-AA LS-6 SAFT OR EQUIVALENT NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

LITHIUM CELL 3.5V SIZE-AA LS-6 SAFT OR EQUIVALENT NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

PENCIL CELL 1.5 V,SIZE-AA,LEAK PROOF EVEREADY NO.1015/NIPPO/NOVINO. NOTE:- 1. IT SHOULD CONFIRM TO IS:9128 GRADE.

PENCIL CELL 1.5 V,SIZE-AA,LEAK PROOF EVEREADY NO.1015/NIPPO/NOVINO. NOTE:- 1. IT SHOULD CONFIRM TO IS:9128 GRADE.

BATTERY CHARGER FOR RECHARGEABLE BATTERY, RCR123/RCR123A/16340 AS PER ANNEXURE-A

BATTERY CHARGER FOR RECHARGEABLE BATTERY, RCR123/RCR123A/16340 AS PER ANNEXURE-A

TAFLON ROD 1-1/2 "DIAX2FT LONG

TAFLON ROD 1-1/2 "DIAX2FT LONG

EBONITE ROD 7/8"(22.23 MM) TYPE-I OF IS:6693-1972

EBONITE ROD 7/8"(22.23 MM) TYPE-I OF IS:6693-1972

EBONITE ROD 1-1/2" CONFIRMING TO IS -6693

EBONITE ROD 1-1/2" CONFIRMING TO IS -6693

EBONITE ROD 1-3/8"DIA

EBONITE ROD 1-3/8"DIA

EBONITE ROD 7/8"DIA BS-234/1957 TYPE 1 OR 2.

EBONITE ROD 7/8"DIA BS-234/1957 TYPE 1 OR 2.

EBONITE ROD POED -M-101 GRADE A.B.3/4"OR 19.05 MM DIA.

EBONITE ROD POED -M-101 GRADE A.B.3/4"OR 19.05 MM DIA.

EBONITE ROD 5/8"(15.875 MM)DIA. TYPE-I OF IS:6693-1972

EBONITE ROD 5/8"(15.875 MM)DIA. TYPE-I OF IS:6693-1972

IS:2771

IS:2771

Boxes Fibre Board Rigid Corrugated Triple Wall 7 Ply of Size 700mmx450mmx400mm CQA(GS)/US/460

CQA(GS)/US/460

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

INVESTMENT CASTING FOR BOARD LF NO 9927099227

INVESTMENT CASTING FOR BOARD LF NO 9927099227

T-02/IC/8070001/246 M1

INVESTMENT CASTING MANDREL LF NO 9927092205

INVESTMENT CASTING MANDREL LF NO 9927092205

T-02/IC/9317009/050 M1

BRACKET CASTING LF NO 7520203400

BRACKET CASTING LF NO 7520203400

T-02/IC/8080029/034M1

BODY CASTING SC/52/651 (LF 7515230400)

BODY CASTING SC/52/651 (LF 7515230400)

BODY CASTING LF NO 7515128900

BODY CASTING LF NO 7515128900

SC/510203/508

SHAFT CASTING LF NO 7512408500

SHAFT CASTING LF NO 7512408500

B-24/IC/8319058/85M1

ST SQR.75 MM TO SPECN.BS:3S144:1995(1999)GD S144H LFVD WITH CAL.SILICIDE TREATMENT.INCLUSION RATINGCHART SECONDARY REFINING STEEL AS PER SPECN.IS:4163-82,i.e.THN/THK SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE: 2.0-1.

ST SQR.75 MM TO SPECN.BS:3S144:1995(1999)GD S144H LFVD WITH CAL.SILICIDE TREATMENT.INCLUSION RATINGCHART SECONDARY REFINING STEEL AS PER SPECN.IS:4163-82,i.e.THN/THK SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE: 2.0-1.

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

STEEL SQR.75 MM TO SPECN.BS:3S144:1995(1999) GD.S144 D, TEST CONDITION S144H.

STEEL SQR.75 MM TO SPECN.BS:3S144:1995(1999) GD.S144 D, TEST CONDITION S144H.

• As per tender document Annexure L

• As per tender document Annexure L

ST.SQR.65MMX2.50MTR LONG OR MULTIPLE TO SPEC.BS:3S144-1995 (1999)GD.S144 D LFVD(WITH CAL.SILICATE TREATMENT,SULPHUR- 0.015MAX,PHOSPHORUS-0.03MAX.AS PER SPCN. IS:4163-1982,INCLU. RATING i.e.THIN/THICK-SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE: 1.5-1,GLOBULAR OXIDE:2.0-1.

ST.SQR.65MMX2.50MTR LONG OR MULTIPLE TO SPEC.BS:3S144-1995 (1999)GD.S144 D LFVD(WITH CAL.SILICATE TREATMENT,SULPHUR- 0.015MAX,PHOSPHORUS-0.03MAX.AS PER SPCN. IS:4163-1982,INCLU. RATING i.e.THIN/THICK-SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE: 1.5-1,GLOBULAR OXIDE:2.0-1.

EBONITE ROD 1/2"DIA AS PER SPECN-IS-6693

EBONITE ROD 1/2"DIA AS PER SPECN-IS-6693

EBONITE ROD 1/2" DIA PO1-D-10GD

EBONITE ROD 1/2" DIA PO1-D-10GD

EBONITE ROD 3/8"DIA [9.5M.M.]. HIEGHLY POLISHED] IS-234/1957.

EBONITE ROD 3/8"DIA [9.5M.M.]. HIEGHLY POLISHED] IS-234/1957.

EBONITE ROD 10 MM DIA. POED M 101 GRADE- A & B.

EBONITE ROD 10 MM DIA. POED M 101 GRADE- A & B.

EBONITE ROD 1"DIA IS-6693.

EBONITE ROD 1"DIA IS-6693.

PERSPEX ROD 12 MM DIA CLEAR TRANSPARENT ACRYLIC COLOURLESS.

PERSPEX ROD 12 MM DIA CLEAR TRANSPARENT ACRYLIC COLOURLESS.

PERSPEX ROD 10 MM DIA CLEAR TRANSPARENT ACRYLIC COLOURLESS

PERSPEX ROD 10 MM DIA CLEAR TRANSPARENT ACRYLIC COLOURLESS

L.E.D.[LIGHT EMITTING DIODE] RED COLOUR DIA-3 MM X 3 MM LONG NOTE:SAMPLE APPROVAL REQUIRED BEFORE BULK SUPPLY

L.E.D.[LIGHT EMITTING DIODE] RED COLOUR DIA-3 MM X 3 MM LONG NOTE:SAMPLE APPROVAL REQUIRED BEFORE BULK SUPPLY

L E D [LIGHT EMMITING DIODE] RED COLOUR COMPLETE WITH COVER DIA-5MM X 7MM LONG NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

L E D [LIGHT EMMITING DIODE] RED COLOUR COMPLETE WITH COVER DIA-5MM X 7MM LONG NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

LED RED COLOUR WITH ADAPTER,DIA.3 MM X LENGTH 4.5 MM,INTENSITY MATCHED STANDARD DIFFUSED,IR.MAX-30 MA,IR.TYPICAL-10 MA, VR.MAX-5V,PD.MAX-120 MW,VIEWING ANGLE- 55 DEGREE,OPERATING TEMP-55 TO 100 DEG.C NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

LED RED COLOUR WITH ADAPTER,DIA.3 MM X LENGTH 4.5 MM,INTENSITY MATCHED STANDARD DIFFUSED,IR.MAX-30 MA,IR.TYPICAL-10 MA, VR.MAX-5V,PD.MAX-120 MW,VIEWING ANGLE- 55 DEGREE,OPERATING TEMP-55 TO 100 DEG.C NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

WHITE SLEEVE III TV-40-230-2X0.4 AS PER SPECN.GOST(RUSSIAN) 19034-73 FOR TNPO 160 AND 168 B.

WHITE SLEEVE III TV-40-230-2X0.4 AS PER SPECN.GOST(RUSSIAN) 19034-73 FOR TNPO 160 AND 168 B.

WHITE SLEEVE 3.31 TB-40,2 GOST 19034-82

WHITE SLEEVE 3.31 TB-40,2 GOST 19034-82

PVC ADHESIVE INSULATION TAPE GREEN COLOUR,SIZE=12 MM WIDE,8 METERS/10 METERS LONG OR IN STD.LENGTH IN ROLL CONFORMING TO IS:7809 MAKE-KINJAL/JOHNSON/PERMACIL

PVC ADHESIVE INSULATION TAPE GREEN COLOUR,SIZE=12 MM WIDE,8 METERS/10 METERS LONG OR IN STD.LENGTH IN ROLL CONFORMING TO IS:7809 MAKE-KINJAL/JOHNSON/PERMACIL

PVC ADHESIVE INSULATION TAPE RED COLOUR SIZE=12 MM WIDE, 8 METERS/10 METERS LONG OR IN STD. LENGTH IN ROLL CONFORMING TO IS:7809 MAKE-KINJAL/PERMACIL/JOHNSON

PVC ADHESIVE INSULATION TAPE RED COLOUR SIZE=12 MM WIDE, 8 METERS/10 METERS LONG OR IN STD. LENGTH IN ROLL CONFORMING TO IS:7809 MAKE-KINJAL/PERMACIL/JOHNSON

STEEL RECTANGULAR BLOCK TO SIZE 165MM

SPECN. BS:3S144 1995 (1999)GD.S144D MATL PROCESSED THROUGH LFVD(WITH CAL.SILICATE TREATMENT)SULP SULPHAR 0 015 MAX & PHOSPHOROUS 0.03 MAX.INCLU.RATING AS PER SPECN. IS:4163-1982

SLEEVE PVC BLACK 10 MM BORE

SLEEVE PVC BLACK 10 MM BORE

EBONITE SHEET 1/4" THICK (6.35

EBONITE SHEET 1/4" THICK (6.35

HYLEM SHEET 3.5MM THICK

HYLEM SHEET 3.5MM THICK

HYLAM ROD 1/4"DIA.

HYLAM ROD 1/4"DIA.

HYLEM SHEET 1.00 MM THICK FABRIC BASE. SPECE:F-105.

HYLEM SHEET 1.00 MM THICK FABRIC BASE. SPECE:F-105.

HYLAM BLACK SHEET 2.5 MM THICK GRADE P1 OF IS:9036-1974

HYLAM BLACK SHEET 2.5 MM THICK GRADE P1 OF IS:9036-1974

ELCON RHEOSTAT (VOLUME CONTROL) WITH SWITCH 27 MM

ELCON RHEOSTAT (VOLUME CONTROL) WITH SWITCH 27 MM

POTENTIOMETER WIRE WOUND 500 OHM, 1WK10TYPE WITH LOCKNUT & WASHER OR EQUIV -ALENT

POTENTIOMETER WIRE WOUND 500 OHM, 1WK10TYPE WITH LOCKNUT & WASHER OR EQUIV -ALENT

POTENTIOMETER 47 K OHMS,LINEAR 16 MM, RESISTIVE ELEMENT-CARBON,POWER RATING- 0.1 WATT,LINEAR VARIATION,ROTATION-300 DEGREE, OPERATING TEMP-55 TO 100 DEG.CENTG. MAKE-PHILIPS NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

POTENTIOMETER 47 K OHMS,LINEAR 16 MM, RESISTIVE ELEMENT-CARBON,POWER RATING- 0.1 WATT,LINEAR VARIATION,ROTATION-300 DEGREE, OPERATING TEMP-55 TO 100 DEG.CENTG. MAKE-PHILIPS NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

POTENTIOMETER 100K RS STOCK NO.168-291

POTENTIOMETER 100K RS STOCK NO.168-291

MINIATURE SEALED SWITCH SPDT 1.5A, ELICO MTA-111, COMPONENT SHOULD BE MIL GRADE ONLY.

MINIATURE SEALED SWITCH SPDT 1.5A, ELICO MTA-111, COMPONENT SHOULD BE MIL GRADE ONLY.

ON-OFF SWITCH TOGGLE ELICO -6 GTAY NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

ON-OFF SWITCH TOGGLE ELICO -6 GTAY NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

MINIATURE TOGGLE SWITCH SEALED SPST 1.5 A,250 VOLTS,ELICO MTA 316 CONFORMING TO IS-3452(PT-1)1966 REAFFIRMED 1989 NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE

MINIATURE TOGGLE SWITCH SEALED SPST 1.5 A,250 VOLTS,ELICO MTA 316 CONFORMING TO IS-3452(PT-1)1966 REAFFIRMED 1989 NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE

TOGGLE SWITCH DPDT, CENTRE OFF, 1.5 AMP, TYPE 6H TAY-N, ELICO MAKE OR EQUIVALENT. NOTE: IT SHOULD CONFIRM TO JSS/MIL GRADE.

TOGGLE SWITCH DPDT, CENTRE OFF, 1.5 AMP, TYPE 6H TAY-N, ELICO MAKE OR EQUIVALENT. NOTE: IT SHOULD CONFIRM TO JSS/MIL GRADE.

SWITCH(TOGGLE),ETA 101,WITH LOCKING RING & TOGGLE BOOT,BLACK COLOUR(ELICO MAKE)

SWITCH(TOGGLE),ETA 101,WITH LOCKING RING & TOGGLE BOOT,BLACK COLOUR(ELICO MAKE)

SWITCH TOGGLE SINGLE POLE 2 AMP SPST 2A-250V.

SWITCH TOGGLE SINGLE POLE 2 AMP SPST 2A-250V.

• NA

• NA

SWITCH PN 45 M (93)

SWITCH PN 45 M (93)

SWITCH ELICO INDIA, 6-6 TAY AC 1.5 A, 230 V WITH LOCK NUT AND WASHER.

SWITCH ELICO INDIA, 6-6 TAY AC 1.5 A, 230 V WITH LOCK NUT AND WASHER.

SLEEVE PVC,3.31 TV-40-4.0X0.6MM AS PER JSS-54801,AND SPEC.NO.OLF/AL/SLV/02/MOD

SLEEVE PVC,3.31 TV-40-4.0X0.6MM AS PER JSS-54801,AND SPEC.NO.OLF/AL/SLV/02/MOD

SLEEVE PVC,3.31 TV-40-3.0X0.4MM AS PER JSS-54801,AND SPEC.NO.OLF/AL/SLV/02/MOD

SLEEVE PVC,3.31 TV-40-3.0X0.4MM AS PER JSS-54801,AND SPEC.NO.OLF/AL/SLV/02/MOD