Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofbqcvrcell[dot]ofb[at]ofb[dot]gov[dot]in
P.C.B.(BOARD) AF7102187 PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO.AF7.102.187 ON GLASS EPOXY BOARD OF THICKN ESS 1.5 MM AND COPPER FOIL
THICKNESS 35 MICROMETER, AND A S PER SPECIFICATION NO. OLF/MSD/PCB/01/MOD, AND CONFOR M TO JSS-52301, PCB SIZE- 100 X 47 SQMM
Specification
P.C.B.(BOARD) AF7102187 PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO.AF7.102.187 ON GLASS EPOXY BOARD OF THICKN ESS 1.5 MM AND COPPER FOIL
THICKNESS 35 MICROMETER, AND A S PER SPECIFICATION NO. OLF/MSD/PCB/01/MOD, AND CONFOR M TO JSS-52301, PCB SIZE- 100 X 47 SQMM
PCB-SMOTP DOUBLE SIDED PTH PCB-SMOTP DOUBLE SIDED PTH AS PER DRG NO : OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FO
IL THICKNESS 35 MICROMETRE, CONFIRMING TO JSS 52301 AND AS PER SPCEN NO : OLF/MSD/PCB/01/MOD SIZE- 94.5 X 71.63 SQMM
Specification
PCB-SMOTP DOUBLE SIDED PTH PCB-SMOTP DOUBLE SIDED PTH AS PER DRG NO : OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FO
IL THICKNESS 35 MICROMETRE, CONFIRMING TO JSS 52301 AND AS PER SPCEN NO : OLF/MSD/PCB/01/MOD SIZE- 94.5 X 71.63 SQMM
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
90
231
Number
11122
170165FGR1
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
SPECN. NO.: IS:4727-1968 except for :-
i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and
C/QAI/TC-8/7(b).
ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn. the material shall conform to the sealed pattern held in the custody of the Controller,CQAT and C,KANPUR.
iii)PACKING and MARKING : As per schedule No. CIT and C/PMS/41.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101876973
122562.58
Metre
11124
OPF/ADVANCE VR/EOI/2019/RECEE BOAT ITEMS-01
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
SPECN-NO:-IS:1424 VARIETY NO.2 EXCEPT THE FOLLOWING-(a)MASS AS PER IS:1964 - 950 TO 1200 GM/Sqm.(b) WIDTH AS PER IS:1954 -91 CMS (MIN.) (C)BREAKING STRENGTH AS PER IS:1969 (RAVELLED STRIP METHOD)-193 KGS. (MIN)WARP:-162 KGS(MIN)WEFT.(d)WATER PROOFNESS PRESSURE HEAD TEST-AS PER CLAUSE 3.3.7.1OF.IS:2089 APPENDIX-E SHOULD WITH STAND 30 CM WATER HEAD FOR ONE HOUR.(e)WATER PROOFNESS CONE TEST AS PER CLAUSE 3.3.7.2 IS:2089appendix-A. No leakages on outer wetting
Specification
SPECN-NO:-IS:1424 VARIETY NO.2 EXCEPT THE FOLLOWING-(a)MASS AS PER IS:1964 - 950 TO 1200 GM/Sqm.(b) WIDTH AS PER IS:1954 -91 CMS (MIN.) (C)BREAKING STRENGTH AS PER IS:1969 (RAVELLED STRIP METHOD)-193 KGS. (MIN)WARP:-162 KGS(MIN)WEFT.(d)WATER PROOFNESS PRESSURE HEAD TEST-AS PER CLAUSE 3.3.7.1OF.IS:2089 APPENDIX-E SHOULD WITH STAND 30 CM WATER HEAD FOR ONE HOUR.(e)WATER PROOFNESS CONE TEST AS PER CLAUSE 3.3.7.2 IS:2089appendix-A. No leakages on outer wetting
IMSA-0151/A (IMPD-0385/B,
IMPD-0386/A,
IMPD-0387/A, IMPD-0438,
IMPD-0439,
IMPD-0440/B) and Sprcn No. CQAE/ 1940/1419/a and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/1520(b):2006
Drawing no.
IMSA-0151/A (IMPD-0385/B, IMPD-0386/A, IMPD-0387/A, IMPD-0438, IMPD-0439, IMPD-0440/B) and Sprcn No. CQAE/ 1940/1419/a and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/1520(b):2006
Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:-
1. Count of yarn- 840 denier high tenacity nylon yarn.
2. width- 44 mm +- 1.5 mm
3. thickness - 1.1 mm (min) to 2.0 mm (max)
4.breaking strength - 1815 Kgs (min)
SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
4-WEIGHT MAX-1120 GMS/100 METERS.
5-BREAKING STRENGTH-MIN.405 KGS ON FULL WIDTH 20 CMS STRIPS
Specification
SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
4-WEIGHT MAX-1120 GMS/100 METERS.
5-BREAKING STRENGTH-MIN.405 KGS ON FULL WIDTH 20 CMS STRIPS
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
9911022279
3036
Metre
11125
3183000888
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Spring Steel Wire dia 1.1MM for Striker Mechanism, Material Spec IV.STA 3 or 4 or IS:4454:2001,SL or BS:1408:1964. 1408-C for Spring as per Drg. ANO.NAD 7606/5
Specification
Spring Steel Wire dia 1.1MM for Striker Mechanism, Material Spec IV.STA 3 or 4 or IS:4454:2001,SL or BS:1408:1964. 1408-C for Spring as per Drg. ANO.NAD 7606/5
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
01
89
Kilogram
11126
2018000172
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges.
Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.
Specification
Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges.
Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody of the Controller, CQAT&C, Kanpur.
Sampling plan and criteria of conformity.
As per anexure 11 (TC-8).
SPECIFICATION :-
NO.OF SPINDLES----------------16
NO. OF ENDS-------------------16
NO.OF PLAITS/dm------------36/37
WEIGHT/Mtr.----------------8.5 gms.(MAX).
TEX OF YARN----------------93.4 X 4
B.S. IN NEWTON-------------3600-N (MIN).
SPECIFICATION :-
NO.OF SPINDLES------------16
NO.OF ENDS----------------32
NO.OF PLAITS-------------45/56
NO.OF CORES----------------2
TEX OF YARN--SEATH = 96.5 X 1
--CORE = 96.5 X 4
B.S. IN NEWTON (15 Cms.BETWEEN GRILLS)--1800-N(MIN)
TYPE-----------------BRAIDED.
MASS/100 M (In Gms.)------475 (MAX).
Specification No. ADRDE/SPECN/71(a) Except that : The revised linear density of Warp yarn will be Type I-840x4 & Type II-840x2 or Type I-1680x2 & Type II-1680x1.
Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3
CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWEEN GRIP)= 250 KG (MIN) PERCENTAGE ELONGATION AT BREAK=26 TO 28;WEAVE=BRAIDED TWIST PER MTR.(TPM)
300+-20(SINGLE) 270+-20(PLY) 250+-20(CABLE
