Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofbqcvrcell[dot]ofb[at]ofb[dot]gov[dot]in
SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the
custody of controller CQAT&C Kanpur and in addition the firm shall get, The name and/or trade mark woven/stamped along with selvedge at the interval of one meter on either side of the
fabric. (2)Packing & Marking:-as per relevant clause of specification. (3)Sampling plan:-As per relevant clause of specification
SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading for breaking strength test for warp and weft shall be
less than the value shown in ISI specn. NO.IS:4726-84.
(ii) 100 % Sampling/Testing/Inspection shall be resorted
(iii)Roll length shall be 80 M or above.(iv) A Flag allowance of 50 cm for each major defect flagged except for continuous defect which shall be given a one meter allowance for each meter in which defect occurs
Specn.-IS:2422-1985 Dye fastness to light may be obtained by Carbon arc method also in case Xenon arc is not available. (a)In appearance shade finish and all other respects not defined in this specification, the material shall conform to the corresponding sealed pattern held in the custody
of the Controller, CQAT&C, Kanpur.
(b) Sampling plan as per Annexure I attached
Spcn :-1. WEIGHT PER SQR.MTR.(IN GRMS)=115 gm.
2. WIDTH IN CM – 94
3. AIR POROSITY(Cub.Ft/Sqr.Ft./Sec.) - 25 TO 30.
4. BREAKING STRENGTH(In Kg)-50 Min. BOTH DIRECTION.
5. THICKNESS IN MM 0.25 (Max).
6. NUMBER OF THREAD/CM - 21/22 IN ONE DIRECTION. - 23/24 ON OTHER DIRECTION
7. TEX. OF YARN - 9.8 X 2 WARP - 9.4 X 2 WEFT
8. FINISHED GRAY MERCERISED
SPECN.NO. :AS PER FOLLOWING PARTICULARS.
a)Width 132 cms., (b)Thickness in mm at 200 gm/sq.cm 0.45,
(c)Weight/mt/Sq (in Gms) 107 Max.,(d) No. of mesh/Sq.inch- 140 ,(e) Tearing strength in kg.in both direction 3.2 min.(f)Bursting strength in kg. 11 kg. min, (g) B.S.in kg 5X20 cms strip length direction 40 min, width direction 24 min.
(h)Elongation at break length direction | 40% width direction 92.5 to 100%
SPECN.NO. :AS PER FOLLOWING PARTICULARS.
a)Width 132 cms., (b)Thickness in mm at 200 gm/sq.cm 0.45,
(c)Weight/mt/Sq (in Gms) 107 Max.,(d) No. of mesh/Sq.inch- 140 ,(e) Tearing strength in kg.in both direction 3.2 min.(f)Bursting strength in kg. 11 kg. min, (g) B.S.in kg 5X20 cms strip length direction 40 min, width direction 24 min.
(h)Elongation at break length direction | 40% width direction 92.5 to 100%
AS PER PARTICULAR =WIDTH=94 CM
A.P.35+_5 Cuft/Sqft/Sec at 10"WHP
Weight/Sq.Metre=115-117 Gram
Thread /cm-Warp-28,WEft-25
Tex of Yarn
Tex x Fold-Warp-9.4x2,Weft-9.5x2
B.S.in Kg-Warp-53kg(min)
Weft-53kg(min.)
Weave-Plain
Finish-Grey Merecerised
FABRIC NYLON LT. WT. 37g RIP STOP WEAVE OLIVE DRAB. SHADE NO 298 (AS PER SPECN. NO IS:5-1994), 94 CM. WIDTH
Specification
SPECIFICATION NO. IS:4726-1984.
EXCEPT THAT:-
i) page 4, clause 2.2.1, third line has been deleted from IS.
ii) page 7, table 1, note 2 has been amended as given
FOR:- 210 g/sq.cm
READ:- 200 g/sq.cm
FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH
Specification
SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2
Read-200 g/cm2
FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE) specification
Specification
Specn. No. :- IS:2422-1985.Dye fastness to light may be obtained by Carbon Arc Method also in case Xenon Arc is not available. (a) In appearance shade finish and all other
respects not defined in this specification,the material shall conform to the corresponding to sealed pattern held in the custody of the Controller, CQA(T&C), Kanpur.
(b) Sampling Plan as per Annexure I attached.
