Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofbqcvrcell[dot]ofb[at]ofb[dot]gov[dot]in
SPECN. NO. CQA(GS)/US/324 EXCEPT THAT MATL. WILL BE BRS. INSTEAD OF ALU.
i) MATERIAL FOR BUCKLE BRASS TO BE Cu Zn 30 (70:30) AS PER IS: 410-1991 (HARD TEMPERED)
ii) BUCLE SHALL BE PRODUCED BY STAMPING.
iii) BUCLE SHALL BE NICKEL CROME PLATE Cu/Ni 25 b Cr.r. As IS: 1068-1993
iv) BUCKLE TO BE FREE FROM SURFACE IRREGULARITIES & SHARP EDGES.
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER
Specification
BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER
Drawing no.
BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawings.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with amendment No. 1 to 6 & Annexure-‘A’ for Sub Assembly of Wind Cheater except PSF”
Specification
Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with amendment No. 1 to 6 & Annexure-‘A’ for Sub Assembly of Wind Cheater except PSF”
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
Cordage Braided Nylon 23 Kg Undyed
CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE
SPCN. No. IS :4227-1998 VARIETY NO. 1 EXCEPT THAT:-
NOMINAL LINEAR DENSITY CORE –-
OF YARN (DTEX), SHEATH Alternate ends of 235X1
a tolerance of and 235x2 dtex
(-)5% and (+) 10%
BREAKING LOAD ON 15CM 226 N, MIN
TEST LENGTH, N
TPM (final) 100, min
Poly Plastic Tape White 12 mm printed with OPF Kanpur in green- colour for semi automatic – strapping device is as per Specification –
1- Colour of tape - White
2- Colour of letter – Green
3- Breaking strength – 70 to 85 kgs.
4- Sealing Temperature – 165 degree centigrade
5- Size 12 mm width X 0.50 mm thick approx.
6-Sporn (paper cone) size O/D 227 MM X I/D 203 MM
7- Length of roll (standard) 1800 mtrs
8- Printing of word OPF KANPUR on the tape white at a gap of 6” word size 8 mm.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
