List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4541 KHALSA ENGG. WORKS
87, SUBHASH ROAD HARJINDER NAGAR-II KANPUR U.P.
PIN1 : 208007
Phone No. : 9839964476
GSTIN : 09AACFK8758M2ZJ 		AACFK8758M

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SPINDLE REGULATOR FOR MAG Description : SPINDLE REGULATOR FOR MAG() Specification : SPINDLE REGULATOR TO DS CAT NO. 1005-007081 DC(I) NO. 26670-SA DT- 17.4.13 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SPRING PLUNGER REAR SIGHT LEAF Description : SPRING PLUNGER REAR SIGHT LEAF() Specification : SPG.PLUNGER REAR SIGHT LEAF PART NO.M-2117 IN FINISHED CONDITION DS CAT NO.5360-000522 DC(I)NO.26149-SA DT.22.01.06 C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) KNOB GAS REGULATOR SCREW FOR MAG Description : KNOB GAS REGULATOR SCREW FOR MAG() Specification : KNOB, GAS REGULATOR SCREW PART NO. 1012 TO DS CAT NO. 1005-000417 DC(I) NO. 25292-SA DT- 14.03.02 IN FINISHED CONDITION (I.C.TO BE SUPPLIED BY SAF) C Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) A4 5340 006721 BUCKLE WAIST ADJUSTABLE ADOPTER SLIDING BAR TYPE PTRM[2102064015]() Specification : SPECN.NO.IND/GS/1802 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]() Specification : DRAWING NO. : JSS 1670-05 : 2013 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SNAP HOOK QUICK EJECTOR FOR PTAM[2110069098]() Specification : ADRDE/1210(c) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) TOWING RING LARGE BPLCA[2010068064]() Specification : Drg. No. 1.3.01-06-01-(b) R Nonestab
2) TOWING RING SMALL FOR BPLCA[2010068065]() Specification : Drg. No. 1.3.01-06-01-(b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]() Specification : DRAWING NO. CQA(GS)/US/562 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) CANOPY RELEASE ASSEMBLY WITH WIRE LOOP[2110021012]() Specification : DRAWING NO. ADRDE/1233(a) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PLATE CURVED WITH HOLE[2110018006]() Specification : SPCN/DRG:ADRDE/1107(d) sheet no. 8 R Nonestab
2) QUICK RELEASE UNIT[2110071022]() Specification : SPECN.NO.: ADRDE/1369(a) DRD/26/98. R Nonestab
3) SWIVEL CONE WITH PLATE[2110071013]() Specification : DRG.NO.:ADRDE/1321(b) DRD/60/98. R Nonestab
4) NIV TRIANGULAR D RING[2010020005]() Specification : DRAWING NO. CQA(GS)/US/560 C Nonestab
5) BUCKLE ADRDE 1429 01[2110029012]() Specification : BUCKLE A.B.C DRG.NO. ADRDE/1429-01 R Nonestab
6) LOCK OCK WITH BUCKLE[2110069032]() Specification : ADRDE/1354. R Nonestab
7) ADJUSTABLE BUCKLE[2110071004]() Specification : DRG.NO.:ADRDE/1304 (a) DRD/46/98. R Nonestab
8) SHOULDER BUCKLE UPPER[2110071006]() Specification : DRG. NO.:ADRDE/1302 (a) DRD/44/98. R Nonestab
9) PIN ASSEMBLY[2010071032]() Specification : DRG.NO.ADRDE/PAS/2008/23 R Nonestab
10) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]() Specification : DRAWING NO. : JSS 1670-05 : 2013 R Nonestab
11) TRIANGULAR D RING[2110030008]() Specification : ADRDE/109(d) R Nonestab
12) INVERTED V[2110071034]() Specification : DRAWING NO. ADRDE/1359(b) R Nonestab
13) Vent Ring 63 mm Dia[2110068055]() Specification : Vent Ring 63 mm Dia 1.3.03-05-01 R Nonestab
14) Coil Spring for BP Hawk[2110025029]() Specification : 1.3.03-01-01(b) R Nonestab
15) Coil Spring BP SU30[2110025072]() Specification : ADRDE/1402-03-002 (a) Except that:- (i) Wire Dia=3.4+-0.1 mm (ii) Permanent set upto 3 mm. (iii) Length of coil spring= 360 +-8 mm. R Nonestab
16) Conical Spring Dia 220 M[2110025051]() Specification : MISC/RP/ADC-150/CSS/01 R Nonestab
17) Metal Components of PTAM[9911038378]() Specification : One set of metal components of PTAM as per Appendix-A. R Nonestab
18) Plate Stiffner[2110080005]() Specification : SPECN-ADRDE/1.6.01-01.07 R Nonestab
19) Device for Tightening Belt[2110090002]() Specification : SPECN. NO. – ADRDE/1.6.01.04-25 (Prov.) R Nonestab
20) Ring 14point5 mm Dia[2110080002]() Specification : SPECN-ADRDE/1.6.01.01.03-02 R Nonestab
21) WRENCH SIZE VARIOUS LIKE 22X24 32X36 etc and TOOLS[2110090010]() Specification : WRENCH SIZE VARIOUS (LIKE 22X24, 32X36 etc.) & TOOLS SET WITH METAL TOOL BOX 5 TIER SIZE = 21" X 8" X 8" 1- VARIOUS SZ OF SPANNERS SIZE 6mm to 36mm -GEDORE-1SET 2- HAMMER 500 GM-GEDORE--1 NO. 3- CUTTING PLA YER-GEDORE/TAPARIYA-1 NO. R Nonestab
22) RIP CORD WITH PIN for BP LCA[2110077029]() Specification : Drg. No. 1.3.01-11(b) R Nonestab
23) Spike[2110090007]() Specification : SPECN-ADRDE/1.6.01.04-29 (PROV.) R Nonestab
24) Hook for Rigging Lines Packing[2110090013]() Specification : ADRDE/1.6.01.04-31 (PROV.) & ADRDE/1.6.01.04-33 (PROV.) R Nonestab
25) LARGE PACKING ROD[2110090014]() Specification : ADRDE/1.6.01.04-32 (PROV.) R Nonestab
26) Clamp[2110029023]() Specification : ADRDE/1417. R Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) COVER for MAG Description : COVER for MAG() Specification : COVER TO DS CAT NO. 1005-000446 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION. C Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PULLEY FOR ROTATING CANOPY[2110068044]() Specification : SPECN:- ADRDE/1319(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PULLY RTU.[2110026012]() Specification : DRG. NO.ADRDE/1041A-2/SA-1 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) LAP STRAP ADJUSTABLE BUCKLE For Pilot Para Mirage Sea Harrier and Jaguar AC[2110075021]() Specification : DRG. NOo. ADRDE/1456(a) Except that :- Material for Spring : Steel Wire for Mechanic Grade-SL as per IS:4454 (Part-1) : 2001, sheet No.12 of 17. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SOCKET FOR HARNESS FOR PSM SERIES[2010068067]() Specification : DRG.NO.ADRDE/1387 (a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PULLEY FOR ROTATING CANOPY[2110068044]() Specification : SPECN:- ADRDE/1319(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) FEMALE COUPLING FOR CWL[2110075039]() Specification : DRG. NO. ADRDE/1344(b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PIN WITH PULLY[2110071016]() Specification : DRG. NO.:ADRDE/1300-G(b) DRD/33/98 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PULLEY[2101069001]() Specification : SPECN. NO. ADRDE/1159-A-2/SA-6(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PULLEY[2101069001]() Specification : SPECN. NO. ADRDE/1159-A-2/SA-6(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) U SHACKLE for PP PSU[2110019015]() Specification : DRG. NO-ADRDE/1380. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SHACKLE WITH NUT AND BOLT BLACK[2110077022]() Specification : DRG. NO. ADRDE/ 1348-G (b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) MALE CONNECTOR[2010071033]() Specification : ADRDE/PAS/2008/24(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) QUICK RELEASE LOCK TP WITH BUCKLE[2110019011]() Specification : DRG.NO.-ADRDE/PAS/2007/16. R Nonestab
2) METALLIC REEL[2110038026]() Specification : SPECN NO.ADRDE/786-SA-1(e) R Nonestab
3) Quick Release Connecting Lug Male for PP BMK41[2110064000]() Specification : DRAWING NO.: ADRDE/797(e) SHEET NO. 8. R Nonestab
4) Shoulder Adjustable Buckle ACPB CT[2110080015]() Specification : Specn No. ADRDE/194(a) R Nonestab
5) RIP Cord Handle Main[2110025079]() Specification : SPECN./DRG. No. 2.1.01.16-00. R Nonestab
6) RIP Cord Handle Reserve[2110025094]() Specification : SPECN./DRG. No. 2.1.01.18-00. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SHACKLE WITH PULLY[2110060001]() Specification : SPECN/DRG.NO: ADRDE/302(c). R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) BRIDDLE RING FOR B.P. PARA JAGUAR A/C[2110018001]() Specification : DRAWING NO. : ADRDE/269(c) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SHACKLE 'D' SHAPED LARGE[2110060002]() Specification : SPECIFICATION :DRAWING NO ADRDE/303(c). R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) ORK II for PP PSU[2110019016]() Specification : DRG NO.-ADRDE/1396. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SHACKLE D SHAPED SMALL[2110060015]() Specification : SPECIFICATION/DRAWING:ADRDE/304((b). R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) ROLLER FITTING[2110075019]() Specification : SPCN.NO.AS PER ADRDE/1446 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) DETACHABLE ALIGNMENT RING[2110071009]() Specification : DRG.NO.:ADRDE/1296-G(b) DRD/29/98. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) CONE BASE AND CONE TOP FOR PP BMK41[2110071031]() Specification : Drawing No. ADRDE/1367(b) and ADRDE/1320(b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) DETACHABLE SHROUD LINK[2110071001]() Specification : DETACHABLE SHROUD LINK R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SNAP HOOK STATIC LINE PTR M WITH SAFETY PIN[2110017018]() Specification : DRAWING NO JSS: 5340-05:2014 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) QUICK RELEASE LINK PAE BAG[2110018011]() Specification : SPCN.NO.ROV.DRG.NO.ADRDE/113(b) R Nonestab
2) Snap Hook Lanyard[2110025090]() Specification : Specn. No. 2.1.01-13-00. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SCREW GUARD TRIGGER BACK TO DRG NO 29P 0055 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG. NO.29P 0055 required for 0.315" Sporting Rifle C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) DRIFT AS PER DRG No K 9004 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 9004 WITH FIRM'S MATERIAL C Nonestab
2) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]() Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL C Nonestab
3) CLAMP HANDLE SUB ASSY TO DRG NO 30P 1310 REQD FOR 40mm MGL[70]() Specification : CLAMP HANDLE SUB ASSY. TO DRG. NO. 30P 1310 REQD. FOR 40mm MGL C Nonestab
Category :
Grade : Grade III
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BOLTS Description : BOLTS() Specification : FINISH MACHINING OF BOLT C Estab
2) BUSHING Description : BUSHING() Specification : AS PER DRG.NO.161-714 C Estab
3) BUSHING SLEEVE FOR MK II Description : BUSHING SLEEVE FOR MK II() Specification : BUSHING SLEEVE TO DRG NO 3120-105151 FOR MK-II SPARE C Estab
4) Cam Cylinder Description : Cam Cylinder() Specification : Rev Comp.Drg. No.-32-0104 C Estab
5) Catch Barrel Description : Catch Barrel() Specification : Rev Component Drg. No. 32-0105 C Estab
6) Catch Hammer Description : Catch Hammer() Specification : Rev Comp.Drg. No.- SK-01289 C Estab
7) CLEANING KIT Description : CLEANING KIT() Specification : AS PER DRG.NO.FGK/MISC/780 C Estab
8) MACHINE COMPONENTS Description : MACHINE COMPONENTS() Specification : STANDARD COMPONENTS FOR T-90 C Estab
9) MACHINING Description : MACHINING() Specification : FINISH MACHINING OF BRACKET C Estab
10) FIXING PIN 1185 Description : FIXING PIN 1185() Specification : FIXING PIN AS PER DRG.NO.176-1185 FOR SHARANG ORD C Estab
11) HAMMER TO DRG. NO. 32-0601 MK-III Description : HAMMER TO DRG. NO. 32-0601 MK-III() Specification : HAMMER TO DRG. NO. 32-0601 MK-III,MATERIAL BS 970 PT I 1983 GD:070 M-55(B.S 970 EN-9) ALT.MATERIAL: FROM I.C ROUTE I.C DRG NO.SK-5377R BS 3146 Pt.1-1974. TYPE CLASS-12 Gr.A. C Estab
12) Lever Cam Description : Lever Cam() Specification : As per FGK Drg.NO. PH 1/3 & FGK 32-0103 C Estab
13) LEVER EXTRACTOR Description : LEVER EXTRACTOR() Specification : FGK DRG. NO. PH-1-7 C Estab
14) LFG ORDNANCE COMPONENTS AS PER ANNEXURE "G" Description : LFG ORDNANCE COMPONENTS AS PER ANNEXURE "G"() Specification : LFG ORDNANCE COMPONENTS C Estab
15) LINER ILG 150 Description : LINER ILG 150() Specification : LINER DRG.NO.ILG-150 C Estab
16) LOCKING PLATE 1481M X Description : LOCKING PLATE 1481M X() Specification : LOCKING PLATE AS PER DRG NO-176-1481 FOR SHARANG ORDNANCE C Estab
17) WASHER Description : WASHER() Specification : WASHER SCREW FOR T-72 & T-90 C Estab
18) MAIN SPRING STRIP Description : MAIN SPRING STRIP() Specification : AS PER DRG.NO. 32-0110 C Estab
19) MACHINING ITEMS DIES/JIGS FIXTURES Description : MACHINING ITEMS DIES/JIGS FIXTURES() Specification : MISCELLANEOUS ITEMS FOR T-72 ORDNANCE C Estab
20) NEEDLE Description : NEEDLE() Specification : AS PER DRG.NO. 115-000211 C Estab
21) PIN Description : PIN() Specification : PIN STRAIGHT HEADLESS C Estab
22) PIN FIRING Description : PIN FIRING() Specification : FGK DRG. NO. SK-01244 C Estab
23) PIN STOP Description : PIN STOP() Specification : FGK DRG. NO. SK-1242 C Estab
24) PLATE BODY TO DRG. NO. 32-0501 MK-III Description : PLATE BODY TO DRG. NO. 32-0501 MK-III() Specification : PLATE BODY TO DRG. NO. 32-0501 MK-III MATERIAL:-BS 970 Pt.1: 1983 Gd. 070 M-55 (BS 970 EN-9), FINISH:-ELECTROSTATIC POWDER COATING AFTER ASSY. ALT MATERIAL FROM IC ROUTE:-BS 3146 PT.1 1974 TYPE CLASS-8. C Estab
25) PLUNGER DETENT Description : PLUNGER DETENT() Specification : PLUNGER DETENT DRG.NO.5340-015489 C Estab
26) PLUNGER PAWL Description : PLUNGER PAWL() Specification : FGK DRG. NO. 32-0-134 C Estab
27) REBOUND SLIDE Description : REBOUND SLIDE() Specification : AS PER DRG.NO. 32-0122 C Estab
28) REBOUND TRIGGER Description : REBOUND TRIGGER() Specification : AS PER DRG. NO.32-0132 MK-III C Estab
29) SCREW Description : SCREW() Specification : AS PER DRG.NO. 5305-003128 C Estab
30) Shield Description : Shield() Specification : Rev Comp.Drg. No.- SK-01287 C Estab
31) SPACER Description : SPACER() Specification : AS PER DRG.NO. 1015-000214 C Estab
32) Spring Catch Barrel Description : Spring Catch Barrel() Specification : As per FGK Drg.NO. PH 1-12/32-0112 C Estab
33) SPRING CATCH HAMMER Description : SPRING CATCH HAMMER() Specification : AS PER DRG.NO. 32-0606 C Estab
34) SPRING CATCH TRIGGER Description : SPRING CATCH TRIGGER() Specification : AS PER DRG.NO. 32-0704 C Estab
35) Spring Main Description : Spring Main() Specification : As per FGK Drg.No. 32-0106 C Estab
36) SPRING PAWL Description : SPRING PAWL() Specification : AS PER DRG.NO. 32-0133 C Estab
37) SPRING REBOUND SLIDE Description : SPRING REBOUND SLIDE() Specification : AS PER DRG.NO. 32-0127 C Estab
38) STOP CYLINDER Description : STOP CYLINDER() Specification : DRG NO 32-011 C Estab
39) STUD STOP CYLINDER Description : STUD STOP CYLINDER() Specification : FGK DRG. NO. PH PH-2-2 C Estab
40) TRIGGER TO DRG. NO. 32-0701 MK-III Description : TRIGGER TO DRG. NO. 32-0701 MK-III() Specification : TRIGGER TO DRG. NO. 32-0701 MK-III ALT VERSION 2 MATERIAL: BS 970 Pt.1: 1983 GD. 070 M-55 (BS 970 EN-9)/ALT.MTL.(I.C.)BS3146 PT.-1,1974 TYPE CLASS-8 ALT. MATERIAL FOR MIM COMPONENTS:MIM 4650. C:0.3-0.6%, NI:1.5-2.5%,Cr-0.5% MAX.,Si-0.5%, C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05 Description : PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05() Specification : PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05 C Estab
2) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
3) CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) Description : CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT)() Specification : DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) C Estab
4) NUT RETAINING HANDLE for MAG Description : NUT RETAINING HANDLE for MAG() Specification : NUT RETAINING HANDLE DS CAT NO. 5310 - 002660 DC(I) NO. 25349-SA DT. 30-04-02 C Estab
5) IC Knob Gas Regulator Screw Description : IC Knob Gas Regulator Screw() Specification : I C SKM-754*2 for Knob Gas Regulator Screw C Estab
6) SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION. Description : SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION.() Specification : SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4542 JAI BHAGWATI ENTERPRISES
A-1/7-A, CO-OPERATIVE INDUSTRIAL ESTATE, UDYOG NAGAR KANPUR U.P.
PIN1 : 208022
Phone No. : 9839113391
GSTIN : 09AKCPS7141L1ZP 		AKCPS7141L

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) WHEEL LOCK FOR RIFLE 5 56 MM Description : WHEEL LOCK FOR RIFLE 5 56 MM() Specification : WHEEL LOCK TO DRG.NO. CQA(SA) SK-454/1/4 DC(I) NO. 26921-SA DT- 26.08.16 IN FINISHED CONDITION. DS CAT NO. 1005-560045 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) RIVET SNAP HEAD DRG NO SK 3220 Description : RIVET SNAP HEAD DRG NO SK 3220() Specification : RIVET SNAP HEAD TO DRG. NO.SK-3220* PHOSPHATED TO SPECN.JSS-0465-01-1988 CLASS II OIL FINISH C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) GUIDE UPPER RIGHT IN WITHOUT HEAT TREATMENT CONDITION FOR MAG Description : GUIDE UPPER RIGHT IN WITHOUT HEAT TREATMENT CONDITION FOR MAG() Specification : GUIDE UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 27011-SA DT- 14.01.2017.IN WITHOUT HEAT TREATMENT CONDITION. C Estab
2) RIVET BOTTOM PLATE 5320 000945 FOR MAG Description : RIVET BOTTOM PLATE 5320 000945 FOR MAG() Specification : RIVET BOTTOM PLATE DS CAT NO. 5320 - 000945 PT.NO.2025Z DC(I) NO. 27286-SA DT- 14.02.21 IN FINISHED CONDITION C Estab
Category : ddp
Grade : 3
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302 Description : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302() Specification : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302(IN FINISH C SPECN BS 970 PT.1:1983 GRADE 080 M40 C Estab
2) Catch Hammer Description : Catch Hammer() Specification : Rev Comp.Drg. No.- SK-01289 C Estab
3) CATCH TRIGGER Description : CATCH TRIGGER() Specification : DRG NO 32-0702 MK-III C Estab
4) LEVER EXTRACTOR Description : LEVER EXTRACTOR() Specification : FGK DRG. NO. PH-1-7 C Estab
5) PAWL Description : PAWL() Specification : DRG NO 32-0102 C Estab
6) PIN FIRING Description : PIN FIRING() Specification : FGK DRG. NO. SK-01244 C Estab
7) PIN STOP Description : PIN STOP() Specification : FGK DRG. NO. SK-01242 C Estab
8) REBOUND TRIGGER Description : REBOUND TRIGGER() Specification : AS PER DRG. NO. 32-0132 MK-III C Estab
9) SAFETY Description : SAFETY() Specification : DRG NO 32-0123R C Estab
10) SWIVELL BUTT SUB ASSEMBLY Description : SWIVELL BUTT SUB ASSEMBLY() Specification : AS PER DRG. NO. 32-1100 C Estab
Category : s
Grade : 3
Size : S
4543 SATYAM ART AND SCREEN
996 AMANPUR MADAN MAHAL JABALPUR 482002 MADAN MAHAL JABALPUR Madhya Pradesh
PIN1 : 482002
Phone No. : 2423846
GSTIN : 23AJFPS1021D1ZW 		AJFPS1021D

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) CES SERVICE EDITION FOR DHANUSH[90]() Specification : CES SERVICE EDITION FOR DHANUSH. E Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory

[Deemed Registration]
Name Specification Use Status
1) INSPECTION LOG BOOK FOR DHANUSH Description : INSPECTION LOG BOOK FOR DHANUSH() Specification : INSPECTION LOG BOOK FOR DHANUSH. P Nonestab
2) HISTORY SHEET BINDER COMPLETE Description : HISTORY SHEET BINDER COMPLETE() Specification : HISTORY SHEET (BINDER COMPLETE). HISTORY SHEET BOOK(BINDER COMPLETE) FOR DHANUSH COMPRISING- 1)BARREL/LINER HISTORY SHEET, 2)BREECH RING/JACKET HISTORY, 3)CARRIAGE/MOUNTING HISTORY, 4)DAILY RECORDS OF ROUND FIRED, 5)RECOIL SYSTEM HI P Nonestab
3) OPERATORS MANUAL FOR DHANUSH Description : OPERATORS MANUAL FOR DHANUSH() Specification : OPERATOR'S MANUAL FOR DHANUSH. P Nonestab
4) PARTS CATALOUGE 1 2 Description : PARTS CATALOUGE 1 2() Specification : PARTS CATALOUGE 1&2. P Nonestab
5) RANGE TABLE CONSOLIDATED DHANUSH Description : RANGE TABLE CONSOLIDATED DHANUSH() Specification : RANGE TABLE CONSOLIDATED DHANUSH. P Nonestab
6) TECHNICAL DESCRIOTION FOR DHANUSH Description : TECHNICAL DESCRIOTION FOR DHANUSH() Specification : TECHNICAL DESCRIOTION FOR DHANUSH. P Nonestab
7) MAINTENANCE MANUAL FIELD SERVICE Description : MAINTENANCE MANUAL FIELD SERVICE() Specification : MAINTENANCE MANUAL FIELD SERVICE. P Nonestab
8) MAINTENANCE MANUAL WORKSHOP Description : MAINTENANCE MANUAL WORKSHOP() Specification : MAINTENANCE MANUAL WORKSHOP. P Nonestab
9) USER HANDBOOK FOR DHANUSH Description : USER HANDBOOK FOR DHANUSH() Specification : USER HANDBOOK FOR DHANUSH. P Nonestab
10) TECHNICAL MANUAL FOR DHANUSH Description : TECHNICAL MANUAL FOR DHANUSH() Specification : TECHNICAL MANUAL FOR DHANUSH. P Nonestab
11) ISPL FOR DHANUSH Description : ISPL FOR DHANUSH() Specification : ISPL FOR DHANUSH. P Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SET OF IGNITER TOP AND BOTTOM CL BAG LF 9911358667[99]() Specification : SET OF IGNITER TOP & BOTTOM CLOTH BAG (EMPTY)- SET CONSIST OF (I) IGNITER TOP AS PER HEMRL DRG NO.1126 (ii) IGNITER BOTTOM AS PER HEMRL DRG NO.1127. C Nonestab
2) PROPELLANT BAG EMPTY FOR 125MM FSAPDS LF NUMBER 9911358720[99]() Specification : PROPELLANT BAG EMPTY FOR 125MM FSAPDS PRACTICE AMMUNITION AS PER DRG NO.ISX 411 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) FABRIC EXCELESSIOR FOR 125MM FSAPDS LF 9911358541[99]() Specification : FABRIC EXCELESSIOR FOR 125MM FSAPDS SIZE (40+/-2) X (820+/-2) mm as per specification No. GOST 20023-89 AND QAP NO.F3/MANGO PROJECT/21-22 DATE 05/10/2021 C Nonestab
2) FABRIC EXCELESSIOR FOR 125MM FSAPDS LF 9911358541[99]() Specification : FABRIC EXCELESSIOR FOR 125MM FSAPDS SIZE (40 +/-2) X (820 +/- 2) MM AS PER SPECIFICATION NO GHOST 20023-89 ANS QAP NO F3/MANGO PROJECT/21-22 DATE 05 10 2021 C Nonestab
3) INSULATION TAPE TBRL MMG H MK 1 046 LF 9911358312[99]() Specification : INSULATION TAPE TO DRG NO TBRL/MMG H MK 1 046/R 1 C Nonestab
4) SET OF LIGHTERS AND FLASH REDUCER LF 9911358663[99]() Specification : SET OF LIGHTER AND FLASH REDUCER COVER WITH GASKET CONSISTING OF. (I) BAG OF LIGHTER LOWER AS PER DRAWING TRD-2.1.3470 & TRD-2.1.3471 QTY.1 NO. (II) BAG AS LIGHTER UPPER AS PER DRAWING TRD-2.1.3474 & TRD-2.1.3475 QTY.1 NO. (III) GASKET AS C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) INSULATION TAPE TBRL MMG H MK 1 046 LF 9911358312 Description : INSULATION TAPE TBRL MMG H MK 1 046 LF 9911358312() Specification : INSULATION TAPE TO DRG NO TBRL/MMG H MK 1 046/R 1 C Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PACKING PIECE TOP BOTTOM LABEL PUFF 9911358395[99]() Specification : PACKING PIECE TOP TO DRG.NO.ARDE 1910 8 QTY.-01 NO. PACKING PIECE BOTTOM TO DRG.NO.ARDE 1910 6 QTY.-01 NO.LABEL ROUND CUTTING TO DRG.NO.ARM 1521 B4 QTY.-01 NO. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) LABEL GOVT EXP TRD 703 D LF 2567130032[25]() Specification : GOVT. EXPLOSIVE LABEL (STICKER LABEL) TO DRG. NO. TRD-703 d. R Nonestab
2) SEAL ADH PERMACEL TYBCAL LF 2513613001[25]() Specification : PERMACEL TYBCAL SF WITH INTERLINER SELF ADHESIVE SEAL TO DRGNO: TRD 994-C. R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) FACTORY LABEL Description : FACTORY LABEL() Specification : AS PER REQUIRED/SPECIFICATION C Estab
2) IDENTIFICATION PLATE Description : IDENTIFICATION PLATE() Specification : AS PER REQUIRED/SPECIFICATION C Estab
3) GRAPH FOR CHECKING LIQUID Description : GRAPH FOR CHECKING LIQUID() Specification : AS PER REQUIRED/SPECIFICATION P Estab
Category : p
Grade : 3
Size : O
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE: 50MM WIDE, COLOUR BLACK Description : TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE: 50MM WIDE, COLOUR BLACK() Specification : IND/ME/790 (b) : 2013 DC NO.5266-ME, DT.24.06.2014 (EACH ROLL OF 50 MTRS.) P Estab
2) WASHER LEATHER LUBRICATED, OD:59.69 MM, ID : 48.26 MM, THICKNESS : 2.03 MM Description : WASHER LEATHER LUBRICATED, OD:59.69 MM, ID : 48.26 MM, THICKNESS : 2.03 MM() Specification : REF.DRG.NO :ISX-343, DS CAT NO-5330-003641. DCI 36265-A DT.02.04.97. C Estab
Category : p
Grade : 3
Size : S
4544 THE METAL POWDER CO. LTD
DOOR NO. 113 VELAYUTHAM STREET SIVAKASI Tamil Nadu
PIN1 : 626123
Phone No. : 280599
GSTIN : 33AAACT4262E1ZQ 		MRIT00817F

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) CALCIUM SILICIDE 63M JSS-6810-107 (1001093023)[10]() Specification : CALCIUM SILICIDE 63 MICROMETER IS SIEVE TO SPECN.JSS-6810-107 :2013 (REV.NO.3) DC NO.5218-ME DT.12/4/2014 R Nonestab
2) ALUMINIUM POWDER HV GR1 60 BSS JSS 1370 03 1001017225[10]() Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS. R Nonestab
3) Magnesium Powder gr.III (1001491847)[10]() Specification : MAGNESIUM POWDER FOR EXPLOSIVE&PYROTECHNIC COMPOSITION GRIIITOSPECN-IS:2307-2004(2nd REV) R Nonestab
4) ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163[10]() Specification : JSS-1370-03:2007 REVISION NO (3) R Nonestab
Category : p
Grade : Grade III
Size : L
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Aluminium Powder Heavy Grade -I, Size-125 Micrometer[10]() Specification : ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER. R Estab
Category : p
Grade : Grade III
Size : L
4545 K P Steel & Metal Enterprises
House No. 6, Near Masjid Yaqub Ali Old Bhandara Road NAGPUR Maharashtra
PIN1 : 440018
Phone No. : 2778625
GSTIN : 27AAIFK8507E1ZA 		AAIFK8507E

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]() Specification : HEMRL/MED/PS/289 (MATERIAL: GALVANIZED STEEL SHEET TO SPECN. NO.IS:277-92) HEMRL C Estab
2) 6432300001 STD CASATTE CONT FOR STD ERA PANEL[64]() Specification : IS:277-92) HEMRL C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) TOP PLUG TO OFAJ DRG.NO:S-78C (REF. DRG.NO.4079922 Description : TOP PLUG TO OFAJ DRG.NO:S-78C (REF. DRG.NO.4079922() Specification : TOP PLUG TO OFAJ DRG.NO:S-78C (REF. DRG.NO.4079922,DC NO.36817-A, DT.08.03.2002,DULY SURFACE TREATED AS PER DRG.NO.5191819, DC NO.34810-A, DT.05.03.90 (PRF FOR 155MM M-107 & M77B ) C Estab
2) TIN BOX FOR STORAGE OF DETONATOR AND CAPS Description : TIN BOX FOR STORAGE OF DETONATOR AND CAPS() Specification : DRG. NO. OFBL/MISC/U-03/96 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6432300002 CASETTE CONTAINER SPCL ERA PANEL Description : 6432300002 CASETTE CONTAINER SPCL ERA PANEL() Specification : HEMRL/MED/PS/289 (MATERIAL: GALVANIZED STEEL SHEET TO SPECN. NO.IS:277-92) HEMRL R Estab
Category : p
Grade : 3
Size : S
4546 N. V. Enterprises
69/5 SITE NO-1 KIDWAI NAGAR kANPUR Uttar Pradesh
PIN1 : 208011
Phone No. : 2232799
GSTIN : 09AACFN7259C1Z8 		AACFN7259C

Download 		1) Small Arms Factory
Name Specification Use Status
1) TRIGGER MECHANISM ASSEMBLY FOR LMG[70]() Specification : TRIGGER MECHANISM ASSEMBLY FOR LMG 7.62 MM BELT FED DRG. NO. 1804 01 01 02 00 000 00DA. C Nonestab
2) Body Finished Through IC for Revolver Side Swing[70]() Specification : Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW. C Nonestab
Category :
Grade : Grade III
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Cam Cylinder Description : Cam Cylinder() Specification : Rev Comp.Drg. No.-32-0104 C Estab
2) FEEDER LEVER DRG.6380630 Description : FEEDER LEVER DRG.6380630() Specification : FEEDER LEVER DRG.6380630 C Estab
3) MACHINE COMPONENTS Description : MACHINE COMPONENTS() Specification : HONING STICK HOLDE FOR SUNNEN C Estab
4) MAIN SPRING SWIVEL MK-III Description : MAIN SPRING SWIVEL MK-III() Specification : AS PER FGK DRG.NO. 32-0121 C Estab
5) PIN Description : PIN() Specification : PIN AXIS CYLINDER AS PER DRG. NO. 32-0303 C Estab
6) PIN CATCH PIN SWIVEL HAMMER Description : PIN CATCH PIN SWIVEL HAMMER() Specification : FGK DRG. NO. PH -6-5 C Estab
7) PIN FIRING Description : PIN FIRING() Specification : FGK DRG. NO. SK-01244 C Estab
8) PLATE BODY TO DRG. NO. 32-0501 MK-III Description : PLATE BODY TO DRG. NO. 32-0501 MK-III() Specification : PLATE BODY TO DRG. NO. 32-0501 MK-III MATERIAL:-BS 970 Pt.1: 1983 Gd. 070 M-55 (BS 970 EN-9), FINISH:-ELECTROSTATIC POWDER COATING AFTER ASSY. ALT MATERIAL FROM IC ROUTE:-BS 3146 PT.1 1974 TYPE CLASS-8. C Estab
9) PLUNGER Description : PLUNGER() Specification : FGK DRG. NO. PH -1-24 C Estab
10) Shield Description : Shield() Specification : Rev Comp.Drg. No.- SK-01287 C Estab
11) STUD HAMMER Description : STUD HAMMER() Specification : FGK DRG. NO. PH -2-4 C Estab
12) STUD REBOUND Description : STUD REBOUND() Specification : AS PER DRG. NO. 32-0205 MK-III C Estab
13) STUD STOP CYLINDER Description : STUD STOP CYLINDER() Specification : FGK DRG. NO. PH PH-2-2 C Estab
14) STUD TRIGGER Description : STUD TRIGGER() Specification : FGK DRG. NO. PH -2-3 C Estab
15) SWIVEL BUTT SUB ASSEMBLY Description : SWIVEL BUTT SUB ASSEMBLY() Specification : AS PER DRG. NO. 32-1100 C Estab
16) Trigger Description : Trigger() Specification : As per FGK Drg.NO. 32-0701 MK-III C Estab
Category : s
Grade : 3
Size : S
4547 Stumpp Schuele and Somappa Springs Pvt Ltd
#04,Bommasandra Industrial area, Zigani link road,Bommasandra Bangalore Karnataka
PIN1 : 560099
Phone No. : 46467421 		AALCS7347E

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SPRING TO CQA A DRG NO 6W8 384 007 DC 37271 A DT 08 112010 Description : SPRING TO CQA A DRG NO 6W8 384 007 DC 37271 A DT 08 112010() Specification : SPRING TO CQA (A) DRG. NO. 6W8-384-007 DC-37271-A DT.08.11.2010 C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Varangaon

[ENR Registration]
Name Specification Use Status
1) LINK CARTG. METALLIC BELT 7.62MM M13 Description : LINK CARTG. METALLIC BELT 7.62MM M13() Specification : TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 & TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004 (II) JSS : 0465-01-1994 (REVISION NO. 1) NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG. E Estab
2) CHARGER CLIP 7.62 mm AMMUNITION- B Description : CHARGER CLIP 7.62 mm AMMUNITION- B() Specification : CIA-4205(d), DC No. 36247-A Dtd.26.02.1997 AS PER DRG. NO. CIA/AMMN/411/IQV/18A, DC(I) 35648-A DT. 12-01-1994. SPRING TO DRG. NO. IQV 61, DCI NO. 36790-A DT. 29-10-2001 & SPECN. IS : 2507-1975. CLIP TO DRG. IQV 62, DCI NO. 36790 DT. 29- E Estab
Category : p
Grade : 3
Size : L
4548 SRI KONARK INDUSTRIES
H.NO. 5-5-35/100, IST FLOOR, PRASHANTH NAGAR,KUKATPALLY, HYDERABAD- 500072 ANDHRA PRADESH
PIN1 : 500072
Phone No. : 9505458485 		ACUPP4392G

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BARREL BLANK AS PER DRG. NO. SK-01394 Description : BARREL BLANK AS PER DRG. NO. SK-01394() Specification : AS PER SPECIFICATION/REQUIREMENT C Estab
2) HAMMER TO DRG. NO. 32-0601 MK-III Description : HAMMER TO DRG. NO. 32-0601 MK-III() Specification : HAMMER TO DRG. NO. 32-0601 MK-III,MATERIAL BS 970 PT I 1983 GD:070 M-55(B.S 970 EN-9) ALT.MATERIAL: FROM I.C ROUTE I.C DRG NO.SK-5377R BS 3146 Pt.1-1974. TYPE CLASS-12 Gr.A. C Estab
Category : s
Grade : 3
Size : S
4549 NATIONAL INDUSTRIES
123/54 SARESH BAGH KANPUR U.P.
PIN1 : 208012
Phone No. : 7860037121 		AAAMPD7969

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4550 S.S.M. BROTHERS LTD.,
POST BOX No. 8, 11-D, GANDHIPURAM MAIN ROAD, KOMARAPALAYAM, NAMAKKAL, TAMIL NADU
PIN1 : 638183
Phone No. : 04288-260815 		AACCS9495C

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CAMBRIC COTTON DYED & UNDYED Description : CAMBRIC COTTON DYED & UNDYED() Specification : IS 5088-1982 (REV.1) WITH AMENDMENT No. 2 REAFFIRMED 2011 DC 3999-ME DT.08-01-2010 (VARIETY No. 2) R Estab
2) THREAD SEWING UNBLEACHED Description : THREAD SEWING UNBLEACHED() Specification : THREAD COTTON SEWING UNBLEACHED UNPROOFED 27 TEX X 9 (COPS OF 1000 MTRS. JSS:8310-02 2016 REVISION NO.3 DC 5497-ME DT.24.09.2016 R Estab
3) WHITE COLOUR COTTON DOWN TIGHT Description : WHITE COLOUR COTTON DOWN TIGHT() Specification : CLOTH COTTON DOWN TIGHT (WHITE COLOUR) SPECN :IND/ME/1005 october 2012 DC - 5105 ME 27/04/2013 WIDTH : 1400 MM. R Estab
4) CALICO BAGS 40 KG Description : CALICO BAGS 40 KG() Specification : BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2017-FOR CLOTH R Estab
5) TAPE COTTON WHITE Description : TAPE COTTON WHITE() Specification : TAPE COTTON WHITE UN-PROOFED FOR AMMUNITION PURPOSES 6 MM + OR -1.5MM WIDE SPECN:IND/ME/888:2015 DC-5405(ME) DT.01.02.2016 R Estab
6) CORD RAYON Description : CORD RAYON() Specification : CORD RAYON WITH BREAKING LOAD 343 N SPECIFICATION :IND/ME/761(B) DC 3754-ME DT.12.12.2002 R Estab
7) TAPE COTTON WHITE 30 MM Description : TAPE COTTON WHITE 30 MM() Specification : TAPE COTTON MEDIUM UNPROOFED SPECN : IND/ME/888:2015 DC 5405-ME DT.01-02-16 (COLOURWHITE , WIDTH : 30MM) R Estab
Category : dp
Grade : 3
Size : S
4551 MICRON INSTRUMENTS PRIVATE LTD.
143-B, INDUSTRIAL AREA-1, P.O.BOX NO. 657 CHANDIGARH PUNJAB
PIN1 : 160002
Phone No. : 0172-2650223 		04AAACMO38

Download 		1) Machine Tool Proto Type Factory

[ENR Registration]
Name Specification Use Status
1) SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... Description : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00...() Specification : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... C Estab
Category : p
Grade : 3
Size : M
1) Machine Tool Proto Type Factory

[ENR Registration]
Name Specification Use Status
1) SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... Description : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00...() Specification : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... C Estab
Category : p
Grade : 3
Size : M
1) Machine Tool Proto Type Factory

[ENR Registration]
Name Specification Use Status
1) SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... Description : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00...() Specification : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... C Estab
Category : p
Grade : 3
Size : M
4552 PRECISION ENGINEERING SERVICES
102, KRISHNA BLDG, LAXMI INDUSTRIAL ESTATE, VARTAK NAGAR POKHRAN ROAD NO 1 THANE Maharashtra
PIN1 : 400606
Phone No. : 25889027
GSTIN : 27ACNPA7929D1ZK 		MUMV15149B

Download 		1) Machine Tool Proto Type Factory
Name Specification Use Status
1) 2019540050 SCREW GRUB CON END N2 40 32 PART NO [20]() Specification : SCREW,GRUB,CON.END.N2-40-32.PART NO C Estab
2) 2019540054 SLOT CSK HD SCRW M6X16LG IS5308 6 8 [20]() Specification : SLOT.CSK.HD.SCRW.M6X16LG IS5308-6.8 C Estab
3) 2019540057 PIN TAPER KP 5X30TO PART NO DW 1070 [20]() Specification : PIN,TAPER,KP-5X30TO PART NO.DW-1070 C Estab
4) 2019540059 KEY RECTANGULAR SPECIAL N4 14 8X50 [20]() Specification : KEY,RECTANGULAR,SPECIAL,N4-14-8X50. C Estab
5) 2019540062 CYLINDRICAL PIN DIA 8 M6X40 LG [20]() Specification : CYLINDRICAL PIN DIA 8-M6X40 LG. C Estab
6) 2019540070 PLUG END SCREWED M12X1 5 DRG N15 11 [20]() Specification : PLUG END SCREWED M12X1.5 DRG.N15-11 C Estab
7) 2019540081 MULTI TOOTH LOCK WASHER B 10 5IS 53 [20]() Specification : MULTI TOOTH LOCK WASHER-B,10.5IS:53 C Estab
8) 2019540084 COVER I TO DRG NO DW 1071 1008 14 [20]() Specification : COVER-I TO DRG.NO.DW-1071-1008-14. C Estab
9) 2019540085 PLUG TO DRG NO DW 1071 1014 14 [20]() Specification : PLUG TO DRG.NO.DW-1071-1014-14. C Estab
10) 2019540088 COVER II TO DRG NO DW 1071 1027 14 [20]() Specification : COVER-II TO DRG.NO.DW-1071-1027-14. C Estab
11) 2019540095 SPACER V TO DRG DW 1070 1025 14 [20]() Specification : SPACER-V TO DRG.DW-1070-1025-14. C Estab
12) 2019540097 SCREW CUT OUT TO DRG NO 6120223 [20]() Specification : SCREW CUT-OUT TO DRG.NO.6120223. C Estab
13) 2019540103 HANDLE TO DRG NO 6097426 [20]() Specification : HANDLE TO DRG.NO.6097426. C Estab
14) 2019540106 SPRING SEAT TO DRG NO 6097424 [20]() Specification : SPRING SEAT TO DRG.NO.6097424. C Estab
15) 2019540112 JOINTING TO DRG NO 6110015 [20]() Specification : JOINTING TO DRG.NO.6110015. C Estab
16) 2019540118 PLUNGER HANDLE TO DRG NO 6095933 [20]() Specification : PLUNGER HANDLE TO DRG.NO.6095933. C Estab
17) 7110303065 SCREW TO DRG NO 6 341 858 [71]() Specification : SCREW TO DRG.NO.6 341 858. C Estab
Category : p
Grade : Grade III
Size : S
4553 COMEEX MACHINE TOOLS CO.
98A/16 HADAPSAR INDUSTRIAL ESTATE, PUNE MAHARASHTRA
PIN1 : 411013
Phone No. : 7720048450
GSTIN : 27AAVPP4747Q1ZG 		AAVPP4747Q

Download 		1) Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) CUP SECURING CARTRIDGE FOR PARA FLARE RED Description : CUP SECURING CARTRIDGE FOR PARA FLARE RED() Specification : DRG. NO. OFDR/CT/31/M/UI/A-4 C Estab
2) SLIDING PLATE FOR PARA FLARE RED Description : SLIDING PLATE FOR PARA FLARE RED() Specification : DRG NO.OFDR/CT/35/M/UI/A-3.AMDT. SL NO.160 DT. 28/05/2005 C Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) VENTURY ASSY FOR PYRO(INDIA) PARA FLARE RED Description : VENTURY ASSY FOR PYRO(INDIA) PARA FLARE RED() Specification : OFDR/CT/14/U I/A3 C Estab
2) DELAY UNIT (EMPTY) PARA FLARE RED Description : DELAY UNIT (EMPTY) PARA FLARE RED() Specification : DRG NO OFDR/CT/22/U-I/A-4(AMENDMENT NO.88 DT 9.5.98) C Estab
3) CONTAINER WITH BASE & LID BUOYANT Description : CONTAINER WITH BASE & LID BUOYANT() Specification : DRG NO. OFDR/CT/1/M1/A3 AMDT DC 103 DT 5-3-99 AND LID FOR CONTAINER TO DRG.NO.OFDR/CT/5/M1/A3 TO SPECN.NO. DGOF/OFDR/008. C Estab
4) LEAF SPRING, 51 ILLG. ITV 221. Description : LEAF SPRING, 51 ILLG. ITV 221.() Specification : DRG.NO. ARDE-2064 (DET NO 23)PT.NO. ITV 221 DC 35882-A DT. 26-12-94 SPEC.NO. CQA(A) 2328 (d) DC-37332-A DT 01-03-13. C Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) CYLINDER POLYTHENE Description : CYLINDER POLYTHENE() Specification : DRG NO OFDR/CARTGS-84/R-3/A-3 AMENDMENT NO.111 DTD 21.5.99 C Estab
2) SLIDING PLATE FOR PYRO(INDIA) HAND FLARE RED Description : SLIDING PLATE FOR PYRO(INDIA) HAND FLARE RED() Specification : DGOF/OFDR/007 [DRG NO.OFDR/CT/1/13/A3] C Estab
3) STRIKER FOR PYRO(INDIA) HAND FLARE RED Description : STRIKER FOR PYRO(INDIA) HAND FLARE RED() Specification : DGOF/OFDR/007[DRG. NO. OFDR/CT/1/8/M1/A4/R14] C Estab
4) CAP CHAMBER FOR PYRO(INDIA) HAND FLARE RED Description : CAP CHAMBER FOR PYRO(INDIA) HAND FLARE RED() Specification : DGOF/OFDR/007[DRG NO.OFDR/CT/1/9/M1/A3] C Estab
5) TUBE FOR PYRO (INDIA) FOR HAND FLARE RED Description : TUBE FOR PYRO (INDIA) FOR HAND FLARE RED() Specification : DGOF/OFDR/004 DRG. NO. OFDR/CT/1/11/A3 C Estab
Category : p
Grade : 2
Size : S
4554 POLY 'Q' ENTERPRISES,
10/324Y, BALAJI NAGAR, JEGATHALA ROAD, ARUVANKADU, THE NILGIRIS TAMIL NADU
PIN1 : 643202
Phone No. : 8940711989 		AAEAA4537F

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) ALKATHENE LINER Description : ALKATHENE LINER() Specification : BAG FILM POLYTHENE 500 GAUGE THICK AS PER CFA SKETCH No. 864 DT. 31-12-2014 (ATTACHED) R Estab
Category : dp
Grade : 3
Size : S
4555 VIJAY TIMBER INDUSTRIES
48, INDUSTRIAL ESTATE, PHASE-II, YAMUNA NAGAR, HARYANA
PIN1 : 135001
Phone No. : 01732-252585 		AAEFV2705P

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) UNIT LOAD FOR CH 8 AND 9 Description : UNIT LOAD FOR CH 8 AND 9() Specification : UNIT LOAD FOR 155 MM CHARGE 8 & 9 TO BOFORS DRG.No.4085565 AND 4085566 AND AS PER CFA DRG.No.13 S 002 INCORPORATING THE SUGGESTIONS OF CQA(A), KADKI, VIDE THEIR LETTER No.QA 17553/GEN/VIII DATED 30/03/1995. R Estab
Category : p
Grade : 3
Size : S
4556 JMP Manufacturing Co.
983-Preet Nagar, Sodal Road Jalandhar Punjab
PIN1 : 144004
Phone No. : 0181-2291653 		JLDJ00011E

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) SPRING SHACKLE Description : SPRING SHACKLE() Specification : SPRING SHACKLE DRG./PART NO.F-3210122 C.0 C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) SPRING SHACKLE Description : SPRING SHACKLE() Specification : SPRING SHACKLE DRG./PART NO.F-3210122 C.0 C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) LPTA SPRING AND SUSPENSION OF 2ITEM Description : LPTA SPRING AND SUSPENSION OF 2ITEM() Specification : SPRING & SUSPENSION OF2 ITEMS (1)ASSY SPRING SHACKLE FRONT PT NO.3523200063 @ 2 NOS a (2) ASSY SPRING SHACKLE REAR PT.NO.3523200163.@ 2 NOS.b C Estab
2) LPTA Ft Spring Hangar Bkt Description : LPTA Ft Spring Hangar Bkt() Specification : FT. SPRING HANGER BKT. FT.& RR. PT.NO. 042.322.0401 J V1 DRG. NO. 042.322.0401 J V1 (SET OF 4 NOS.) C Estab
3) LPTA GUIDE PLATE Description : LPTA GUIDE PLATE() Specification : GUIDE PLATE DRG.NO.X2604.3240.3201 C Estab
Category : p
Grade : 3
Size : S
4557 SWAN PAINT & VARNISH WORKS
153 MANICKTALA MAIN ROAD KOLKATA WEST BENGAL
PIN1 : 700054
Phone No. : 9883313614 		AEUPM9907Q

Download 		1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) SHELLAC LACQUER APC-211 TIN WITH DYE AURAMINE FOR BODY, FUZE DA 5A Description : SHELLAC LACQUER APC-211 TIN WITH DYE AURAMINE FOR BODY, FUZE DA 5A() Specification : SPCN- DN NO- JSS-8010-63:2004 DS CAT NO-8010-000307 C Estab
2) PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111 Description : PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111() Specification : SPCN- DEF STAN-80-15/1 C Estab
3) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING() Specification : AS PER REQUIREMENT C Estab
4) PAINT FINISHING CHLORINATED RUBBER TYPE BRUSHING Description : PAINT FINISHING CHLORINATED RUBBER TYPE BRUSHING() Specification :AS PER REQUIREMENT C Estab
5) APC NO-217 FOR FUZE DA 5A Description : APC NO-217 FOR FUZE DA 5A() Specification : SPCN- JSS-8010-42, DST-84 AMENDMENT-2 :1989 C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) SHELLAC LACQUER APC-211 TIN WITH DYE AURAMINE FOR BODY, FUZE DA 5A Description : SHELLAC LACQUER APC-211 TIN WITH DYE AURAMINE FOR BODY, FUZE DA 5A() Specification : SPCN- DN NO- JSS-8010-63:2004 DS CAT NO-8010-000307 C Estab
2) PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111 Description : PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111() Specification : SPCN- DEF STAN-80-15/1 C Estab
3) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING() Specification : AS PER REQUIREMENT C Estab
4) PAINT FINISHING CHLORINATED RUBBER TYPE BRUSHING Description : PAINT FINISHING CHLORINATED RUBBER TYPE BRUSHING() Specification :AS PER REQUIREMENT C Estab
5) APC NO-217 FOR FUZE DA 5A Description : APC NO-217 FOR FUZE DA 5A() Specification : SPCN- JSS-8010-42, DST-84 AMENDMENT-2 :1989 C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Ambernath

[ENR Registration]
Name Specification Use Status
1) VARNISH SHELLAC 20 PERCENT APC Description : VARNISH SHELLAC 20 PERCENT APC() Specification : JSS 8010 63 : 2012 Rev No.3 P Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Ambernath

[ENR Registration]
Name Specification Use Status
1) VARNISH SHELLAC 20 PERCENT APC Description : VARNISH SHELLAC 20 PERCENT APC() Specification : JSS 8010 63 : 2012 Rev No.3 P Estab
Category : p
Grade : 3
Size : S
4558 MARSAN ENTERPRISES
24,KOTKAR INDUSTRIAL ESTATE, BABASAHEB KOTKAR MARG OFF , AAREY ROAD, MUMBAI, MAHARASHTRA,
PIN1 : 400063
Phone No. : 0512-2295042 		AAAPL3140N

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
2) SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008 Description : SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008 C Estab
3) SPG CATCH MAGAZINE 5360 000789 FOR CARBINE 9MM Description : SPG CATCH MAGAZINE 5360 000789 FOR CARBINE 9MM() Specification : SPG.CATCH MAGAZINE DS CAT NO.5360-000789 IN FINISHED CONDITION DC(I)26372-SA,DT.16-08-2007 C Estab
4) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
Category : p
Grade : 3
Size : S
4559 CACUTTA CARTON COMPANY
32 COSSIPORE ROAD KOLKATA WEST BENGAL
PIN1 : 700002
Phone No. : 9433097348 		AJKPK7603C

Download 		1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) PACKING BOXES OF VARIOUS SIZE & DESIGN Description : PACKING BOXES OF VARIOUS SIZE & DESIGN() Specification : AS PER DRAWING C Estab
2) CARTON BOX IN FC Description : CARTON BOX IN FC() Specification : AS PER DRAWING C Estab
3) SELF PARTITIONED PACKING BOX Description : SELF PARTITIONED PACKING BOX() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) PACKING BOXES OF VARIOUS SIZE & DESIGN Description : PACKING BOXES OF VARIOUS SIZE & DESIGN() Specification : AS PER DRAWING C Estab
2) CARTON BOX IN FC Description : CARTON BOX IN FC() Specification : AS PER DRAWING C Estab
3) SELF PARTITIONED PACKING BOX Description : SELF PARTITIONED PACKING BOX() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) PACKING BOXES OF VARIOUS SIZE & DESIGN Description : PACKING BOXES OF VARIOUS SIZE & DESIGN() Specification : AS PER DRAWING C Estab
2) CARTON BOX IN FC Description : CARTON BOX IN FC() Specification : AS PER DRAWING C Estab
3) SELF PARTITIONED PACKING BOX Description : SELF PARTITIONED PACKING BOX() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) PACKING BOXES OF VARIOUS SIZE & DESIGN Description : PACKING BOXES OF VARIOUS SIZE & DESIGN() Specification : AS PER DRAWING C Estab
2) CARTON BOX IN FC Description : CARTON BOX IN FC() Specification : AS PER DRAWING C Estab
3) SELF PARTITIONED PACKING BOX Description : SELF PARTITIONED PACKING BOX() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
4560 INDIAN OIL CORPORATION LTD
BLOCK NO.9 2ND FLOOR SCHEME NO.18, CIVIC CENTRE JABALPUR -482002 M.P. BLOCK NO.9 2ND FLOOR SCHEME NO.18, CIVIC CENTRE JABALPUR M.P.
PIN1 : 482002
Phone No. : 0761-2743368 		482002I189

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) WAX PARAFFIN SPECIAL JSS-9160-06 (1020871017) Description : WAX PARAFFIN SPECIAL JSS-9160-06 (1020871017)() Specification : PARAFFIN WAX SPECIAL TO SPECN:-JSS-9160-06 :2002 (REV.NO.2) (reaffirmed 2011) DC NO.-5047-ME.DT.15/12/2011 R Estab
2) SULPHUR GR 1 ITEM CODE 1001734157 Description : SULPHUR GR 1 ITEM CODE 1001734157() Specification : SULPHUR GR. 1 IN LUMPS FORM TO SPECN :- JSS-6810-103:2017 (REV NO. 4) DC NO. 5099-ME DT. 21/12/2012. R Estab
Category : p
Grade : 3
Size : L