List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4341 ROHINI AUTO ELECT. PVT. LTD.
D-22, PHASE-IV(EXSTN) I.D.A. JEEDIMETLA HYDERABAD TELANGANA
PIN1 : 500055
Phone No. : 040-3095125
GSTIN : 36AAACR9658L1ZP 		AAACR9658L

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) HOUSING REAR SIGHT 1005 007898 Description : HOUSING REAR SIGHT 1005 007898() Specification : HOUSING REAR SIGHT TO DRG ARDE SK 2825/29 DS CAT NO 1005-007898 DC (I) NO. 26548-SA DT.25.11.10 IN FINISHED CONDITION NOTE: IC WILL BE SUPPLIED BY SAF AGAINST BANK GURANTEE C Estab
2) HOUSING REAR SIGHT NO ARDE SK 3143 83 for LMG 5 56 mm Description : HOUSING REAR SIGHT NO ARDE SK 3143 83 for LMG 5 56 mm() Specification : HOUSING REAR SIGHT TO DRG.NO.ARDE SK 3143/83 DS CAT NO.1005-008012 DC NO.26516-SA DT-26.06.10 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4342 HIMATECH ENGINEERS
PLOT NO, C61/A, I, E, SANATHNAGAR HYDERABAD TELANGANA
PIN1 : 500018
Phone No. : 9140-23702558 		AAXPN4079P

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SPRING LOCK FOR DEVICE FIRING Description : SPRING LOCK FOR DEVICE FIRING() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Rivet MS Snap Head Description : Rivet MS Snap Head() Specification : RIVET M.S. SNAP HEAD 1.59 DIA X 4.19 L TO BSS 641:1951 TABLE ...2 (CADMIUM PLATED) TO BE RIVETED ON DEVICE FIRING 1B C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) RIVET SNAP HEAD FOR SMALL ARMS Description : RIVET SNAP HEAD FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
Category : p
Grade : 3
Size : S
4343 AMPSON ENGINEERING PVT. LTD.
PLOT NO. N-26, MIDC TARAPUR BOISAR, DISTRICT-PALGHAR, MAHARASHTRA
PIN1 : 401506
Phone No. : 9892288803 		AAACA3817G

Download 		1Machine Tool Proto Type Factory

[ENR Registration]
Name Specification Use Status
1) 7112305004 MED SUPPORT OF 155M MM EDP FUZE AS PER DRG NO 770 28 33 00 Description : 7112305004 MED SUPPORT OF 155M MM EDP FUZE AS PER DRG NO 770 28 33 00() Specification : 7112305004 MED SUPPORT OF 155M MM EDP FUZE AS PER DRG NO 770 28 33 00 C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) MODE SELECTOR SWITCH HOUSING ASSEMBLY AS PER ODC MTPF DRG NO 740 13 21 00 Description : MODE SELECTOR SWITCH HOUSING ASSEMBLY AS PER ODC MTPF DRG NO 740 13 21 00() Specification : MODE SELECTOR SWITCH HOUSING ASSEMBLY AS PER ODC/MTPF DRG NO 740-13-21-00 C Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) NOSE OGIVE AS PER ODC MTPF DRG NO 140 01 12 00 Description : NOSE OGIVE AS PER ODC MTPF DRG NO 140 01 12 00() Specification : NOSE OGIVE AS PER ODC/MTPF DR NO.140-01-12-00 C Estab
2) MODE SELECTOR SWITCH ASSEMBLY AS PER ODC MTPF DRG NO 740 13 23 00 Description : MODE SELECTOR SWITCH ASSEMBLY AS PER ODC MTPF DRG NO 740 13 23 00() Specification : MODE SELECTOR SWITCH ASSEMBLY AS PER ODC/MTPF DRG.NO.740-13-23-00 C Estab
3) LOWER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 32 00 Description : LOWER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 32 00() Specification : LOWER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC/MTPF DRG NO 770-22-32-00 C Estab
4) UPPER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 31 00 Description : UPPER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 31 00() Specification : UPPER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC/MTPF DRG NO 770-22-31-00 C Estab
5) ELECTRONIC MODULE HOUSING AS PER ODC MTPF DRG NO 740 12 21 00 Description : ELECTRONIC MODULE HOUSING AS PER ODC MTPF DRG NO 740 12 21 00() Specification : ELECTRONIC MODULE HOUSING AS PER ODC/MTPF DRG NO.740-12-21-00 C Estab
6) BAKELITE WASHER FOR 155 MM ELECTRONIC FUZE Description : BAKELITE WASHER FOR 155 MM ELECTRONIC FUZE() Specification : BAKELITE WASHER FOR 155 MM ELECTRONIC FUZE C Estab
Category : ddp
Grade : 1
Size : S
4344 MAX STEELS
GAGANGIRI TOWER, OFFICE NO.103, 1ST FLOOR 25/29, DR. DESHMUKH LANE MUMBAI Maharashtra
PIN1 : 400004
Phone No. : 23867943 		AFXPS8582F

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) FORGED CARBON STEEL ROUND TO SPECN IS1570 C40 IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METER SIZE 60MM DIA PLUS OR MINUS 2MM Description : FORGED CARBON STEEL ROUND TO SPECN IS1570 C40 IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METER SIZE 60MM DIA PLUS OR MINUS 2MM() Specification : SPECN. IS:1570, C40 IN NORMALISED CONDITION R Estab
Category : p
Grade : 3
Size : O
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) OFE COPPER ROD AS PER EN 13604 CW009A CONDITION D SIZE 50 MM DIA Description : OFE COPPER ROD AS PER EN 13604 CW009A CONDITION D SIZE 50 MM DIA() Specification : OFE COPPER ROD AS PER EN 13604-CW009A CONDITION D SIZE 50 MM DIA C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) OFE COPPER ROD AS PER SPECIFICATION ASTM B 170 GRADE I SIZE 45 MM DIA Description : OFE COPPER ROD AS PER SPECIFICATION ASTM B 170 GRADE I SIZE 45 MM DIA() Specification : OFE COPPER ROD AS PER SPECIFICATION ASTM B 170 GRADE I SIZE 45 MM DIA R Estab
Category : s
Grade : 3
Size : O
1Gun Carriage Factory

[Deemed Registration]
Name Specification Use Status
1) ST PIPE100 X78MM BS 970PT 1 83 708M Description : ST PIPE100 X78MM BS 970PT 1 83 708M() Specification : STEEL PIPE O/D 100.00MM +/-0.50MM X I/D 78.00MM +/-0.50MM, THE PIPE SHOULD BE 1.9 MTRS OR ITS MULTIPLE LENGTH, TO MATERIAL SPECN: BS 970-PT-1-1983, GD 708 M40 OR 709 M40. CONDITION`T' C Estab
Category : s
Grade : 3
Size : M
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088 3 1 4523 A SIZE 12 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES Description : GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088 3 1 4523 A SIZE 12 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES() Specification : GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088 3 1 4523 A SIZE 12 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) OXYGEN FREE COPPER STRIP TO SPECN BS 2870 1980 GRADE C103 CONDITION 1 2 H HAVING STRAIGHT LENGTH OF 2 5 TO 3 MT SIZE 92 1MM WIDE X 4 0 1 MM THICK Description : OXYGEN FREE COPPER STRIP TO SPECN BS 2870 1980 GRADE C103 CONDITION 1 2 H HAVING STRAIGHT LENGTH OF 2 5 TO 3 MT SIZE 92 1MM WIDE X 4 0 1 MM THICK() Specification : OXYGEN FREE COPPER STRIP TO SPECN BS 2870 1980 GRADE C103 CONDITION 1 2 H HAVING STRAIGHT LENGTH OF 2 5 TO 3 MT SIZE 92 1MM WIDE X 4 0 1 MM THICK R Estab
Category : ddp
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 1 SPECN EXTRUDED HOLLOW PROFILE IN LENGTH OF 4850 20MM FOR KERB AS PER DRG NO VLW 31416 AND SCOPE OF SUPPLY AS PER ANNEXURE B Description : ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 1 SPECN EXTRUDED HOLLOW PROFILE IN LENGTH OF 4850 20MM FOR KERB AS PER DRG NO VLW 31416 AND SCOPE OF SUPPLY AS PER ANNEXURE B() Specification : ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE IN LENGTH OF 4850 +20MM FOR KERB AS PER DRG.NO.VLW 31416 & SCOPE OF SUPPLY AS PER ANNEXURE 'B'" C Estab
Category : ddp
Grade : 3
Size : S
1Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) 0103056925 PIPE STEEL BLACK TUBE TYPE S GDE B TO SPECIFICATION ASTM A 53 AS PER DRG NO GCF 20 SK 314 EACH TUBE SHOULD BE SEAMLESS AND SHOULD BE TESTED ULTRASONICALLY AND TO BE FREE FROM ALL DEFECTS Description : 0103056925 PIPE STEEL BLACK TUBE TYPE S GDE B TO SPECIFICATION ASTM A 53 AS PER DRG NO GCF 20 SK 314 EACH TUBE SHOULD BE SEAMLESS AND SHOULD BE TESTED ULTRASONICALLY AND TO BE FREE FROM ALL DEFECTS() Specification : 0103056925 PIPE STEEL BLACK TUBE TYPE S GDE B TO SPECIFICATION ASTM A 53 AS PER DRG NO GCF 20 SK 314 EACH TUBE SHOULD BE SEAMLESS AND SHOULD BE TESTED ULTRASONICALLY AND TO BE FREE FROM ALL DEFECTS C Estab
Category : ddp
Grade : 3
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) 0700100007 COPPER ROD 6 POINT 5 MM DIA 0 POINT 09 MM IN Description : 0700100007 COPPER ROD 6 POINT 5 MM DIA 0 POINT 09 MM IN() Specification : BS:2874-1986 R Estab
Category : p
Grade : 3
Size : S
1Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) 9910449732 STEEL PIPE O D 100 MM 0 50MM X I D 78 MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T Description : 9910449732 STEEL PIPE O D 100 MM 0 50MM X I D 78 MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T() Specification : 9910449732 STEEL PIPE O D 100 MM 0 50MM X I D 78 MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T R Estab
Category : s
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) STEEL ROD 32 0 50 MM DIA X 1200 5 MM LONG TO IS 2062 200 GRADE E 250 QUALITY A OR B OR C 0142450032 Description : STEEL ROD 32 0 50 MM DIA X 1200 5 MM LONG TO IS 2062 200 GRADE E 250 QUALITY A OR B OR C 0142450032() Specification : STEEL ROD 32+/-0.50 MM DIA X 1200+/-5 MM LONG TO IS 2062-200 GRADE-E 250, QUALITY A OR B OR C. R Estab
2) PLATE 12 0 5 MM X 1000MM X 770MM STEEL TO IS 2062 2006 GRADE E 250 QUALITY A OR B OR C 0142451277 Description : PLATE 12 0 5 MM X 1000MM X 770MM STEEL TO IS 2062 2006 GRADE E 250 QUALITY A OR B OR C 0142451277() Specification : PLATE 12+/-0.5 MM X 1000MM X 770MM STEEL TO IS 2062-2006 GRADE -E 250,QUALITY A OR B OR C. R Estab
3) PLATE 25MM THICK X 880MM X 650MM STEEL TO IS 2062 2006 GRADE E 250 QUALITY A OR B OR C 0142452588 Description : PLATE 25MM THICK X 880MM X 650MM STEEL TO IS 2062 2006 GRADE E 250 QUALITY A OR B OR C 0142452588() Specification : PLATE 25MM THICK X 880MM X 650MM STEEL TO IS 2062-2006 GRADE-E 250, QUALITY A OR B OR C. R Estab
4) AL ALLOY PLATE OF 3 MM THICK X 1200 MM WIDTH X 1800 MM LENGTH OR ITS MULTIPLE LENGTH OF AL ALLOY GRADE 24345 HE 15 WP CONDITION AS PER IS 737 0660453210 Description : AL ALLOY PLATE OF 3 MM THICK X 1200 MM WIDTH X 1800 MM LENGTH OR ITS MULTIPLE LENGTH OF AL ALLOY GRADE 24345 HE 15 WP CONDITION AS PER IS 737 0660453210() Specification : AL.ALLOY PLATE OF 3 MM THICK X 1200 MM WIDTH X 1800 MM LENGTH OR ITS MULTIPLE LENGTH OF AL. ALLOY GRADE 24345 (HE-15) WP CONDITION AS PER IS:737. R Estab
5) ALUMINIUM ALLOY PLATE TO IS 733 1983 REV 3 GRADE 19500 OR 19000 OF SIZE 6MM THICKNESS X 1000 MM WIDTH X 2500 MM LONG IN M CONDITION 0660456025 Description : ALUMINIUM ALLOY PLATE TO IS 733 1983 REV 3 GRADE 19500 OR 19000 OF SIZE 6MM THICKNESS X 1000 MM WIDTH X 2500 MM LONG IN M CONDITION 0660456025() Specification : ALUMINIUM ALLOY PLATE TO IS :733:1983 (REV 3) (GRADE 19500 OR 19000) OF SIZE 6MM THICKNESSX1000 MM WIDTH X 2500 MM LONG IN 'M' CONDITION. R Estab
6) AL ALLOY WELDING WIRE GRILUMIN S MG 45 SIZE 1 POINT 6 MM DIA TO DIN SPECN 1732 SG AL MG 4 POINT 5 MN ZR 3 POINT 3546 Description : AL ALLOY WELDING WIRE GRILUMIN S MG 45 SIZE 1 POINT 6 MM DIA TO DIN SPECN 1732 SG AL MG 4 POINT 5 MN ZR 3 POINT 3546() Specification : AL.ALLOY WELDING WIRE GRILUMIN S-MG-45.SIZE:-1.6 MM DIA.TO DIN SPECN.-1732. SG-AL MG 4.5 MN ZR/3.3546. R Estab
7) SEAMLESS STEEL TUBE TO SPECN DIN 2391 OF SIZE 134 point 5 MM OD X 9 point 5 MM THICK X 1250 MM LONG STEEL HAVING PROP UTS 52 KGF per MM SQ MIN YIELD STRENGTH 36 KGF per MM SQ MIN percent ELONGATION 22 percent ON GAUGE LENGTH 5 point 65 SQ ROOT AREA Description : SEAMLESS STEEL TUBE TO SPECN DIN 2391 OF SIZE 134 point 5 MM OD X 9 point 5 MM THICK X 1250 MM LONG STEEL HAVING PROP UTS 52 KGF per MM SQ MIN YIELD STRENGTH 36 KGF per MM SQ MIN percent ELONGATION 22 percent ON GAUGE LENGTH 5 point 65 SQ ROOT AREA() Specification : SEAMLESS STEEL TUBE TO SPECN.DIN 2391 OF SIZE -134.5MM O/D +/-0.15 X9.5MM THICK X1250MM LONG.STEEL HAVING PROPERTIES UTS 52 KGF/MM SQ.(MIN). YIELD STRENGTH 36KGF/MM SQ.(MIN).% ELONGATION 22% ON GAUGE LENGTH 5.65SQ. ROOT AREA. R Estab
Category : ddp
Grade : 1
Size : S
1Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) 0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316 Description : 0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316() Specification : 0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316 R Estab
Category : s
Grade : 3
Size : O
4345 ROHIT RUBBER PRODUCTS
W-66,S-BLOCK, MIDC,BHOSARI BHOSARI PUNE Maharashtra
PIN1 : 411026
Phone No. : 27120224 		AACFR2764G

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SEALING RING TO CQA AMMN DRG NO 3 016919 DET 35 DC I 36861 A DT 30 10 2002 Description : SEALING RING TO CQA AMMN DRG NO 3 016919 DET 35 DC I 36861 A DT 30 10 2002() Specification : SEALING RING TO CQA (AMMN)DRG.NO.3-016919 DET-35 DC(I)36861-A DT.30.10.2002 C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6432100100 REPLACEMENT OF SILICON RUBBER SEAL Description : 6432100100 REPLACEMENT OF SILICON RUBBER SEAL() Specification : REPLACEMENT OF SILICON RUBBER SEAL OF STEEL CUP FOR 120 MM FSAPDS & HESH C Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) WASHER (ACROLUNITRILE BUTADINE RUBBER COMPOUND Grade E ) FOR SHELL 155MM ILLG Naschem M1A1 Description : WASHER (ACROLUNITRILE BUTADINE RUBBER COMPOUND Grade E ) FOR SHELL 155MM ILLG Naschem M1A1() Specification : DRG. NO. 155-1120 C Estab
Category : p
Grade : 2
Size : S
1Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) WASHER RUBBER FOR BOMB 3 KG PRACTICE Description : WASHER RUBBER FOR BOMB 3 KG PRACTICE() Specification : WASHER RUBBER TO DRG.NO.ARDE 2024 DET NO.25 AL NO 671 DATED 29/05/91 SPECN;IND/ME/584(f) CLASS D DC NO.3754-ME DT.12/12/2002. C Estab
2) RUBBER RING FOR BOMB 81MM ILLG. Description : RUBBER RING FOR BOMB 81MM ILLG.() Specification : DRG NO ARDE 1965 DET 25 PT NO ITV 134 C Estab
3) O RING FOR MORTAR BOMB 81MM ILLG 2A Description : O RING FOR MORTAR BOMB 81MM ILLG 2A() Specification : CQA(A) 2345 (C) [DRG. NO. ARDE 2222, DET 6, PART NO ITV 263] C Estab
4) O RING 2MM FOR 51MM ILLG. ITV Description : O RING 2MM FOR 51MM ILLG. ITV() Specification : SPECN. CQA(A) 2328(d) DRG. NO. ARDE 2064 (DET 6) PT NO. ITV 224 C Estab
5) RUBBER WASHER FOR MORTAR BOMB 51MM ILLG Description : RUBBER WASHER FOR MORTAR BOMB 51MM ILLG() Specification : CQA(A) 2328(C)[DRG.NO. ARDE 2064, Det No. 17, Part No ITV 234] C Estab
6) O RING 61 X 2 MM FOR 84 MM ILLG. Description : O RING 61 X 2 MM FOR 84 MM ILLG.() Specification : DRG.NO.F-1301-055320 C C Estab
7) O RING 69.5 DIA FOR 84 MM ILLG. Description : O RING 69.5 DIA FOR 84 MM ILLG.() Specification : DRG.NO.F-1301-054930 C C Estab
8) RUBBER RING FOR 84 MM ILLG. Description : RUBBER RING FOR 84 MM ILLG.() Specification : RUBBER RING TO DRG.NO.F-1301-047940-D DC 34802 A NATURALRUBBER TO SPECN.IND/ME/728 COMPUND Z-14-C. C Estab
9) RUBBER WASHER FOR 105 MM ILLG. Description : RUBBER WASHER FOR 105 MM ILLG.() Specification : DRG.ARDE 9769 DET NO 18 PART NO.ISX 432 C Estab
Category : p
Grade : 2
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SEALING RING TO CQA AMMN DRG NO 3 016919 DET 4 DC I 36861 A DT 30 10 2002 Description : SEALING RING TO CQA AMMN DRG NO 3 016919 DET 4 DC I 36861 A DT 30 10 2002() Specification : SEALING RING TO CQA(AMMN) DRG.NO.3-016919 DET.4 DC(I)36861-A DT.30.10.2002 C Estab
2) SEALING RING TO CQA AMMN DRG NO 3 016919 DET 35 DC I 36861 A DT 30 10 2002 Description : SEALING RING TO CQA AMMN DRG NO 3 016919 DET 35 DC I 36861 A DT 30 10 2002() Specification : SEALING RING TO CQA (AMMN)DRG.NO.3-016919 DET-35 DC(I)36861-A DT.30.10.2002 C Estab
Category : ddp
Grade : 1
Size : S
4346 ANANT AUOTMATS PVT LTD
G-20 SITE-3 PANKI INDUSTRIAL AREA KANPUR Uttar Pradesh
PIN1 : 208022
Phone No. : 260008
GSTIN : 09AABCA6960D2ZR 		AABCA6960D

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LOCKING PISTOL GRIP FOR JVPC Description : PIN LOCKING PISTOL GRIP FOR JVPC() Specification : PIN LOCKING PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-04-00-09-001-00DA C Estab
Category : ddp
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC Description : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC() Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB C Estab
Category : ddp
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) RIVET FRONT BLOCK AND SIDE PLATE BIG FOR FRONT BLOCK AND SIDE PLATE Description : RIVET FRONT BLOCK AND SIDE PLATE BIG FOR FRONT BLOCK AND SIDE PLATE() Specification : RIVET,FRONT BLOCK & SIDE PLATE(BIG) TO DRG NO SKM 876E FOR FRONT BLOCK & SIDE PLATE C Estab
2) RIVET BOTTOM PLATE FOR MAG Description : RIVET BOTTOM PLATE FOR MAG() Specification : RIVET BOTTOM PLATE TO DS CAT NO. 5320 - 000944 PT.NO.2025Y DC(I) NO. 27014-SA DT- 16.01.17 IN FINISHED CONDITION. C Estab
3) RIVET COCKING HANDLE GUIDE FOR MAG Description : RIVET COCKING HANDLE GUIDE FOR MAG() Specification : RIVET, COCKING HANDLE GUIDE PART NO. 025T (DS CAT.NO. 5320-002938 DC(I) 27016-SA DT. 19.01.17) C Estab
4) PIN STRAIGHT HEADLESS FRONT SIGHT BAND for MAG Description : PIN STRAIGHT HEADLESS FRONT SIGHT BAND for MAG() Specification : PIN STRAIGHT HEADLESS (FRONT SIGHT BAND)TO DS CAT NO. 5315-001500 DC(I) NO. 25727-SA DT- 19.4.03 IN FINISHED CONDITION. C Estab
5) SPLIT PIN HOLLOW HALF LINK FOR MAG Description : SPLIT PIN HOLLOW HALF LINK FOR MAG() Specification : DS CAT NO. 5315-001523 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION C Estab
6) SPLIT PIN SOLID HALF LINK PART NO B 32 EC Description : SPLIT PIN SOLID HALF LINK PART NO B 32 EC() Specification : DS CAT NO. 5315-001524 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION C Estab
7) PIN CATCH BUFFER BODY Description : PIN CATCH BUFFER BODY() Specification : PIN, CATCH BUFFER BODY TO DS CAT NO. 5315-001531 DC(I) NO. 27020-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
8) ALL TYPES OF PINS FOR SMALL ARMS Description : ALL TYPES OF PINS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 Description : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
10) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
11) Pin Straight Head Less (Block Gas) drg .no. 5315-009260 for LMG 5.56mm Description : Pin Straight Head Less (Block Gas) drg .no. 5315-009260 for LMG 5.56mm() Specification : AS PER DRG. C Estab
12) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
13) PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16. Description : PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.() Specification : PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16. C Estab
14) PIN SPRING STOP DS CAT NO 5315 002026 IN FINISHED CONDITION FOR CARBINE 9MM Description : PIN SPRING STOP DS CAT NO 5315 002026 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : PIN SPRING STOP DS CAT NO 5315-002026 DC(I)NO.24969 DATED 19-03-2001 IN FINISHED CONDITION C Estab
15) SCREW GRUB B A STEEL CONICAL POINTED DS CAT NO 5305 005079 FOR CARBINE 9MM Description : SCREW GRUB B A STEEL CONICAL POINTED DS CAT NO 5305 005079 FOR CARBINE 9MM() Specification : SCREW GRUB B.A. STEEL CONICAL POINTED DS CAT NO.5305-005079 DC-26341-SA DATED 01-06-07 C Estab
16) Nut Extractor DRG. No. PH-4-2 Description : Nut Extractor DRG. No. PH-4-2() Specification : As per Drg. C Estab
17) PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 Description : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99() Specification : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 C Estab
18) SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER Description : SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW PLUNGER TO DRG NO.PH-1-26 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
19) Steel Blank plug Gas to Drg. No. SK-5217(Material will be supply by SAF against B/G) Description : Steel Blank plug Gas to Drg. No. SK-5217(Material will be supply by SAF against B/G)() Specification : AS PER DRG. C Estab
20) STUD CHANGE LEVER FOR INSAS 5.56 MM Description : STUD CHANGE LEVER FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
21) STEEL BLANK FOR STUD CHANGE LEVER FOR CARBINE 5 56 Description : STEEL BLANK FOR STUD CHANGE LEVER FOR CARBINE 5 56() Specification : STEEL BLANK FOR STUD CHANGE LEVER TO DRG.NO-RFI SK-7017-S* D.A.NO.08/17 C Estab
22) Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm Description : Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) Trigger ( Carbine) Drg No. AKC-01/8, Description : Trigger ( Carbine) Drg No. AKC-01/8,() Specification : AS PER DRG. C Estab
24) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
25) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
26) PIN GROOVED HEADLESS LOCKING CUP HAND GUARD IN FINISHED CONDITION FOR FOR RIFLE 5 56 Description : PIN GROOVED HEADLESS LOCKING CUP HAND GUARD IN FINISHED CONDITION FOR FOR RIFLE 5 56() Specification : PIN GROOVED HEADLESS LOCKING CUP HAND GUARD TO DS CAT NO. 5315-009191 D.C.NO.26501-SA DT. 08.05.2010 IN FINISHED CONDITION. C Estab
27) PIN COCKING HANDLE STUD FOR SMALL ARMS Description : PIN COCKING HANDLE STUD FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) RIVET SNAP HEAD FOR SMALL ARMS Description : RIVET SNAP HEAD FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
29) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
30) PIN GROOVED HD FOR HINGE COVER OF SMALL ARMS Description : PIN GROOVED HD FOR HINGE COVER OF SMALL ARMS() Specification : AS PER DRAWING C Estab
31) Pin Grooved Headed for Hammer DS CAT NO 5315 009190 Description : Pin Grooved Headed for Hammer DS CAT NO 5315 009190() Specification : Pin Grooved Headed for Hammer DS CAT NO 5315 009190 C Estab
32) LINK CROSS PIECE LONG DSCATNO. 5315-001511 DC(I) 25355-SA DT.07.05.02 Description : LINK CROSS PIECE LONG DSCATNO. 5315-001511 DC(I) 25355-SA DT.07.05.02() Specification : LINK CROSS PIECE LONG DS CATNO. 5315-001511 DC(I) 25355-SA DT.07.05.02 C Estab
33) BUSH RETAINING STEM Description : BUSH RETAINING STEM() Specification : BUSH RETAINING STEM TO 7DS CAT NO. 1005-006842 DC(I) NO. 27107-SA DT-21.06.17 C Estab
34) BUSHING BLANK, TO DS CAT NO. 5340-009974 DC(I) NO.25387-SA DT.07.06.02 IN F INISHED CONDITION. Description : BUSHING BLANK, TO DS CAT NO. 5340-009974 DC(I) NO.25387-SA DT.07.06.02 IN F INISHED CONDITION.() Specification : BUSHING BLANK, TO DS CAT NO. 5340-009974 DC(I) NO.25387-SA DT.07.06.02 IN F INISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4347 CGM MARKETING ENGINEERS
BLOCK NO.27,1ST FLOOR,SHRI GITA MANDIR COMPLEX,SUBHASH ROAD NAGPUR MAHARASHTRA
PIN1 : 440018
Phone No. : 9890330757
GSTIN : 27ACYPM9347E1ZV 		ACYPM9347E

Download 		1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1753011704 NAIL WIRE IRON ROUND SHANK Description : 1753011704 NAIL WIRE IRON ROUND SHANK() Specification : IS:723-1972. R Estab
Category : s
Grade : 3
Size : S
1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) M.S.TARGET PLATE FOR CLC-2 Description : M.S.TARGET PLATE FOR CLC-2() Specification : M.S.TARGET PLATE FOR CLC-2 SIZE:1000 MM X 300 MM X 12.5 MM. TOL.ON THICKNESS 5% SPECN NO IS2062:1999. R Estab
2) MS TARGET PLATE FOR FLSC-12 Description : MS TARGET PLATE FOR FLSC-12() Specification : MS TARGET PLATE FOR FLSC-12 SPECIFICATION: MILD STEEL TARGET SHEETS TO IS:2062:1999 DIMENTION:1000 MM (L) X 300 MM (W) X 2 MM(T) R Estab
3) MS TARGET PLATE FOR FLSC-4 Description : MS TARGET PLATE FOR FLSC-4() Specification : MS TARGET PLATE FOR FLSC-4 SPECIFICATION: MILD STEEL TARGET SHEETS TO IS:2062:1999 DIMENTION: 1000 MM(L) X 300 MM(W) X 1 MM(T). R Estab
4) MS TARGET PLATE FOR FLSC-25 Description : MS TARGET PLATE FOR FLSC-25() Specification : MS TARGET PLATE FOR FLSC-25 SPECIFICATION:MILD STEEL TARGET SHEET TO IS:2062:1999 DIMENTION: 1000 MM(L) X 300 MM(W) X 4 MM(T) R Estab
Category : p
Grade : 1
Size : S
4348 VINARC ENGINEERS
W-258 'S'BLOCK MIDC BHOSARI PUNE MAHARASHTRA
PIN1 : 411026
Phone No. : 02027121622 		AAAHM9009F

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) LOCK ASSY TO ARDE DRG NO 8603 01 01 00 03 000 00DB ISSUE I REV 2 OF OCT 2009 OR LATEST AMENDED DRG AND SPECIFICATION AS ON TE DATE 6180458603 Description : LOCK ASSY TO ARDE DRG NO 8603 01 01 00 03 000 00DB ISSUE I REV 2 OF OCT 2009 OR LATEST AMENDED DRG AND SPECIFICATION AS ON TE DATE 6180458603() Specification : "LOCK ASSY" TO ARDE DRG.NO.8603-01-01-00-03-000-00DB ISSUE-I,REV-2 OF OCT.-2009. OR LATEST AMENDED DRG. AND SPECIFICATION AS ON T.E. DATE 6180458603 C Estab
2) CONTAINER FOR ROCKET LINKS ASSY AS PER DRG NO 8603 01 01 01 10 000 00PA ALONGWITH 1 HEX NUT M12 TO SS GRADE A2 70 OR A4 70 TO IS 1367 PART 14 SEC 2 2002 2NOS 2 SS SPRING LOCK WASHER FOR SCREW M12 TO DIN127B ANY GRADE OR EQIVAL 2NOS 6180458610 Description : CONTAINER FOR ROCKET LINKS ASSY AS PER DRG NO 8603 01 01 01 10 000 00PA ALONGWITH 1 HEX NUT M12 TO SS GRADE A2 70 OR A4 70 TO IS 1367 PART 14 SEC 2 2002 2NOS 2 SS SPRING LOCK WASHER FOR SCREW M12 TO DIN127B ANY GRADE OR EQIVAL 2NOS 6180458610() Specification : CONTAINER FOR ROCKET LINKS(ASSY).AS PER DRG.NO.8603-01-01-01 10-000-00PA ALONGWITH ,1)HEX NUT M12 TO SS GRADE A2-70 OR A4-70 TO IS 1367(PART14/SEC2):2002-2NOS.,2)SS SPRING LOCK WASHER FOR SCREW M12 TO DIN127B(ANY GRADE) OR EQIVAL.-2NOS.,3 C Estab
3) HOOK ASSY TO DRG NO 8603 01 01 01 06 000 00XA RAW MATERIAL TO IS 2062 2006 GRADE E 250 QUALITY A OR B OR C OR LATEST AMENDED DRG AND SPECN AS ON TE DATE 6188600014 Description : HOOK ASSY TO DRG NO 8603 01 01 01 06 000 00XA RAW MATERIAL TO IS 2062 2006 GRADE E 250 QUALITY A OR B OR C OR LATEST AMENDED DRG AND SPECN AS ON TE DATE 6188600014() Specification : HOOK ASSY. TO DRG. NO. 8603-01-01-01-06 -000-00XA RAW MATERIAL TO IS 2062-2006 GRADE E 250, QUALITY A OR B OR C, OR LATEST AMENDED DRG. AND SPECN. AS ON T.E. DATE 6188600014 C Estab
4) POD STACKING ASSY TO DRG NO 8603 01 01 01 07 000 12 XA OR LATEST AMENDED DRG AND SPECN AS ON TE DATE 6188600015 Description : POD STACKING ASSY TO DRG NO 8603 01 01 01 07 000 12 XA OR LATEST AMENDED DRG AND SPECN AS ON TE DATE 6188600015() Specification : POD STACKING ASSY.TO DRG. NO. 8603-01-01-01-07-000-12 XA. OR LATEST AMENDED DRG. AND SPECN. AS ON T.E. DATE 6188600015 C Estab
5) POD STACKING ASSY FRONT TO DRG NO 8603 01 01 01 08 000 12XA OR LATEST AMENDED DRG AND SPECN AS ON TE DATE 6188600016 Description : POD STACKING ASSY FRONT TO DRG NO 8603 01 01 01 08 000 12XA OR LATEST AMENDED DRG AND SPECN AS ON TE DATE 6188600016() Specification : POD STACKING ASSY.(FRONT)TO DRG.NO.8603-01-01-01-08-000-12XA OR LATEST AMENDED DRG. AND SPECN. AS ON T.E. DATE 6188600016 C Estab
6) REAR COVER ASSY TO DRG NO 8603 01 01 01 09 000 00XA OR LATEST AMENDED DRG AND SPECN AS ON TE DATE 6188600017 Description : REAR COVER ASSY TO DRG NO 8603 01 01 01 09 000 00XA OR LATEST AMENDED DRG AND SPECN AS ON TE DATE 6188600017() Specification : REAR COVER ASSY. TO DRG. NO. 8603-01-01-01-09-000-00XA. OR LATEST AMENDED DRG. AND SPECN AS ON T.E.DATE C Estab
7) BRACKET ASSY AS PER DRG NO 8603 01 01 01 03 000 00XA OR LATEST AMENDED DRG AND SPECIFICATION AS ON TE DATE 6188609000 Description : BRACKET ASSY AS PER DRG NO 8603 01 01 01 03 000 00XA OR LATEST AMENDED DRG AND SPECIFICATION AS ON TE DATE 6188609000() Specification : BRACKET ASSY. AS PER DRG. NO. 8603-01-01-01-03-000-00XA OR LATEST AMENDED DRG. AND SPECIFICATION AS ON T.E. DATE 6188609000 C Estab
8) SUSPENSION ASSY OF DRG NO ADRDE 1416 FOR AN 32 PLATFORM 6245001416 Description : SUSPENSION ASSY OF DRG NO ADRDE 1416 FOR AN 32 PLATFORM 6245001416() Specification : SUSPENSION ASSY OF DRG NO ADRDE-1416 FOR AN-32 PLATFORM C Estab
9) CHOCK WHEEL OF DRG NO ADRDE 1427 FOR AN 32 PLATFORM 6245001427 Description : CHOCK WHEEL OF DRG NO ADRDE 1427 FOR AN 32 PLATFORM 6245001427() Specification : CHOCK WHEEL OF DRG NO. ADRDE -1427 FOR AN-32 PLATFORM 6245001427 C Estab
10) BRACKET CORNER LEFT TO DRG NO ADRDE 1403 01 01 07L 6245141409 Description : BRACKET CORNER LEFT TO DRG NO ADRDE 1403 01 01 07L 6245141409() Specification : BRACKET CORNER (LEFT) TO DRG NO ADRDE-1403-01-01-07L C Estab
11) BRACKET CORNER RIGHT TO DRG NO ADRDE 1403 01 01 07R Description : BRACKET CORNER RIGHT TO DRG NO ADRDE 1403 01 01 07R() Specification : BRACKET CORNER (RIGHT) TO DRG. NO. ADRDE-1403-01-01-07R C Estab
12) BRACKET MIDDLE TO DRG NO ADRDE 1403 01 01 08A 6245141411 Description : BRACKET MIDDLE TO DRG NO ADRDE 1403 01 01 08A 6245141411() Specification : BRACKET MIDDLE TO DRG NO ADRDE-1403-01-01-08A C Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Medak

[ENR Registration]
Name Specification Use Status
1) LOCK ASSEMBLY 8603 01 01 00 03 000 Description : LOCK ASSEMBLY 8603 01 01 00 03 000() Specification : LOCK ASSEMBLY 8603 01 01 00 03 000 C Estab
Category : p
Grade : 2
Size : S
4349 NOVATECK
5-35-269, SHAKTIPURAM, APIIC ROAD, KUKATPALLY HYDERABAD TELANGANA
PIN1 : 500072
Phone No. : 04023078678 		AARPM1215C

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) DETONATOR CONTACT ASSEMBLY AS PER ODC MTPF DRG NO 770 12 26 00 Description : DETONATOR CONTACT ASSEMBLY AS PER ODC MTPF DRG NO 770 12 26 00() Specification : DETONATOR CONTACT ASSEMBLY AS PER ODC/MTPF DRG NO 770-12-26-00 C Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) PIN AND HOUSING ASSEMBLY GRAZE SWITCH AS PER ODC MTPF DRG NO 740 22 32 00 Description : PIN AND HOUSING ASSEMBLY GRAZE SWITCH AS PER ODC MTPF DRG NO 740 22 32 00() Specification : PIN & HOUSING ASSEMBLY (GRAZE SWITCH) AS PER ODC/MTPF DRG.NO.740-22-32-00 C Estab
2) BALL AND HOUSING ASSEMBLY IMPACT SWITCH AS PER ODC MTPF DRG NO 740 24 33 00 Description : BALL AND HOUSING ASSEMBLY IMPACT SWITCH AS PER ODC MTPF DRG NO 740 24 33 00() Specification : BALL AND HOUSING ASSEMBLY (IMPACT SWITCH) AS PER ODC/MTPF DRG NO.740-24-33-00 C Estab
Category : ddp
Grade : 1
Size : S
4350 AISHWARYA ELECTRICALS PVT.LTD.
F1/C,SITE NO.1,PANKI INDUSTR. PANKI INDUSTRIAL AREA,KANPUR-208020 KANPUR UTTAR PRADESH
PIN1 : 208020
Phone No. : 9839033104 		AABCA6852A

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III Description : GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III() Specification : AS PER DRG. NO. 32-0800 & 32-0900 E Estab
Category : s
Grade : 3
Size : S
4351 SHIVATHENE LINOPACK
PLOT NO.1A, SECTOR- 3, INDUSTRIAL AREA PARWANOO, DIST- SOLAN H. P.
PIN1 : 173220
Phone No. : 1792233115 		AACCS1454K

Download 		1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Resin Shivapol 709 Description : Resin Shivapol 709() Specification : RESIN-SHIVAPOL 709. SPECN-(i) DENSITY AT 25 DEG CENT(G/CM- CUBE)-1.0 -0.05(ii)VISCOSITY AT 25 DEG CENT (CPS),900-1200 (iii)HYDROXYL VALUE(MG OF KOH/G),130-150(iv)ACID VALUE(MG/KO H/G),MAX 0.1(v)MOISTURE(%)MAX 0.5,(vi)MOLECULAR WEIGHT(Mn) R Estab
2) Melamine Make China/Indonesia Description : Melamine Make China/Indonesia() Specification : MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICL R Estab
Category : p
Grade : 3
Size : S
4352 MOHAN ENGINEERING
W 110, MIDC Hingna Nagpur MAHARASHTRA
PIN1 : 440016
Phone No. : 9423680887
GSTIN : 27ACMPK8779N1ZG 		ACMPK8779N

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 Description : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 C Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Nonestab
2) COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 022[00]() Specification : as per Drawing C Nonestab
Category : p
Grade : Grade III
Size : SS
4353 KASTURI LAL & SONS
M-7, INDUSTRIAL AREA, RAILWAY STATION JAGADHRI, YAMUNA NAGAR, HARYANA
PIN1 : 135001
Phone No. : 01732-250608 		AACFK3691D

Download 		1Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) UNIT LOAD FOR CH 8 AND 9 Description : UNIT LOAD FOR CH 8 AND 9() Specification : UNIT LOAD FOR 155 MM CHARGE 8 & 9 TO BOFORS DRG.No.4085565 AND 4085566 AND AS PER CFA DRG.No.13 S 002 INCORPORATING THE SUGGESTIONS OF CQA(A), KADKI, VIDE THEIR LETTER No.QA 17553/GEN/VIII DATED 30/03/1995. R Estab
Category : p
Grade : 3
Size : S
4354 MULTIMETALS LIMITED
HEAVY INDUSTRIAL AREA KAUSUA ROAD KOTA RAJASTHAN
PIN1 : 324003
Phone No. : 0744-3008510 		AKIPM8881H

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) DRIVING BAND BLANK AS PER CQA DRG NO 155 1030 Description : DRIVING BAND BLANK AS PER CQA DRG NO 155 1030() Specification : DRIVING BAND BLANK AS PER CQA(A) KIRKEE ASSEMBLY DRAWING NO 155-1030 2439A 11002 AND DESIGNER'S REF NO. 155-1060 DC 36792-A DT. 01-11-01 R Estab
2) COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 022 Description : COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 022() Specification : as per Drawing R Estab
3) COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 095 Description : COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 095() Specification : as per drawing R Estab
4) Second Driving Band Blank to OFAJ Drg No SM 213 K Description : Second Driving Band Blank to OFAJ Drg No SM 213 K() Specification : AS PER OFAJ Drg. No.SM-213 K. R Estab
5) Driving Band Blank to OFAJ Drg No SM 214 M Description : Driving Band Blank to OFAJ Drg No SM 214 M() Specification : AS PER DRAWING R Estab
Category : ddp
Grade : 1
Size : L
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 0.42MM TH X39.5MM WIDE() Specification : JSS-9535-02-2008 Rev.3 R Estab
2) BRASS STRIP 113MM WIDE X 0.40MM THICK() Specification : JSS 9535-02:2008 REV. 3. R Estab
3) BRASS STRIP 0.40MM X 38MM WIDE() Specification : JSS-9535-02 - 2008 Rev. No. 3 R Estab
4) BRASS STRIP 35.6MM WIDE X 0.58MM TH() Specification : JSS-9535 - 02 - 2008 REV. NO. 3 R Estab
Category : p
Grade : 3
Size : L
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 0.42MM TH X39.5MM WIDE() Specification : JSS-9535-02-2008 Rev.3 R Estab
2) BRASS STRIP 113MM WIDE X 0.40MM THICK() Specification : JSS 9535-02:2008 REV. 3. R Estab
3) BRASS STRIP 0.40MM X 38MM WIDE() Specification : JSS-9535-02 - 2008 Rev. No. 3 R Estab
4) BRASS STRIP 35.6MM WIDE X 0.58MM TH() Specification : JSS-9535 - 02 - 2008 REV. NO. 3 R Estab
Category : p
Grade : 3
Size : L
4355 TRIESS ENGINEERS
NEW NO.-3, PLOT NO.-35, GANESH NAGAR 5TH STREET, G.K. INDUSTRIAL ESTATE ALAPPAKKAM, PORUR CHENNAI T.N.
PIN1 : 600116
Phone No. : 9444042729 		ABEPS1123M

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) 20.UNIT BURST CONTROL DRG NO:1005-007791 R5 Description : 20.UNIT BURST CONTROL DRG NO:1005-007791 R5() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
4356 NEMANI POLY PRODUCTS (P)LTD.
UNIT-II,SHED-B,PLOT 24-A,BAJRA NG BALI AUDYOGIC ASTHAN,BATTA, AREA,PANKI UDYOG NAGAR,KANPUR KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : 0512-3291348 		AAACN4829R

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) SPRING MAIN TO DRG. NO.32-0106 Description : SPRING MAIN TO DRG. NO.32-0106() Specification : SPRING MAIN TO DRG. NO.32-0106 MATERIAL SPRING STEEL, Gr- 4, IS: 4454 (Pt-1)-81 C Estab
Category : ddp
Grade : 3
Size : S
1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) SPRING MAIN TO DRG. NO.32-0106 Description : SPRING MAIN TO DRG. NO.32-0106() Specification : SPRING MAIN TO DRG. NO.32-0106 MATERIAL SPRING STEEL, Gr- 4, IS: 4454 (Pt-1)-81 C Estab
Category : ddp
Grade : 3
Size : S
4357 swastik
nagpur nagpur maharashtra
PIN1 : 441906
Phone No. : 07122256 		145678

Download 		1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) SULPHURIC ACID Minimum 98% Strength Description : SULPHURIC ACID Minimum 98% Strength() Specification : IS:266:1993 Third Rev Reaffirmed-2003 ammed-1 R Estab
2) Aluminium Stearate Description : Aluminium Stearate() Specification : ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.. R Estab
3) Ether Solvent Grade Description : Ether Solvent Grade() Specification : Specn. No. IS:336-1973 ( second Revision ) reaffirmed - 2002 D.C. 3811- ME Dtd 05-05-04 R Estab
4) ETHYLENE GLYCOL Description : ETHYLENE GLYCOL() Specification : ETHYLENE GLYCOL MONOETHYLETHER (CELLOSOLVE SOLVENT) SPECN. NO. IND/ME/422 (a) 3754-ME-DT.12.12.2002. R Estab
Category : s
Grade : 3
Size : S
4358 PONDY OXIDES & CHEMICALS
KRM CENTRE 4TH FLOOR, 2, HARRINGTON ROAD, CHETPET CHENNAI TAMILNADU
PIN1 : 600031
Phone No. : 04442965455 		CHEPO2071G

Download 		1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Litharge (Lead Mono Oxide) Description : Litharge (Lead Mono Oxide)() Specification : LITHARGE (LEAD MONOXIDE) CONFORMING TO THE FOLLOWING SPECN. A) APPEARANCE: YELLOW POWDER B) LEAD MONOXIDE (PbO) CONTENT : MIN. 96%. C) ALKALINE IMPURITIES AS (CaO): 0.002% MAX. D) GRANULATION: MAX.5.0% RETAINED ON 250 MICROMTER I.S.SIEV R Estab
Category : dp
Grade : 3
Size : S
4359 Radiant Organics Pvt Ltd
6 Juhu Sea View Juhu tara Road Sanatcruz west Mumbai Maharashtra
PIN1 : 400049
Phone No. : 26609358
GSTIN : 27AACCR4078A2ZK 		MUMRO7292F

Download 		1Ordnance Factory Bhandara

Name Specification Use Status
1) ACETIC ANHYDRIDE FOR HMX PLANT1[10]() Specification : ACETIC ANHYDRIDE : PURITY - 97.5% MIN. COLOUR - 10 APHA MAX AND SUSPENDED MATTER - NIL. R Estab
Category : p
Grade : Grade III
Size : M
4360 ENTREMONDE POLYCOATERS LIMITED
KILFIRE HOUSE, 1st FLOOR, C-17, DALIA INDUSTRIAL AREA, OPP. LAXMI INDUSTRIAL ESTATE, OFF LINK ROAD ANDHERI WEST MUMBAI MAHARASHTRA
PIN1 : 400053
Phone No. : 022-26732563 		AAACE0944L

Download 		1Ordnance Equipment Factory Hazaratpur

[ENR Registration]
Name Specification Use Status
1) FABRIC NYLON PU COATED 250 GSM WHITE 100 CM() Specification : DMSRDE/T&GS/89/377 (d) R Estab
Category : ddp
Grade : 3
Size : S

Copyright © 2025 - OFB