List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4361 ROHINI AUTO ELECT. PVT. LTD.
D-22, PHASE-IV(EXSTN) I.D.A. JEEDIMETLA HYDERABAD TELANGANA
PIN1 : 500055
Phone No. : 040-3095125
GSTIN : 36AAACR9658L1ZP 		AAACR9658L

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) HOUSING REAR SIGHT 1005 007898 Description : HOUSING REAR SIGHT 1005 007898() Specification : HOUSING REAR SIGHT TO DRG ARDE SK 2825/29 DS CAT NO 1005-007898 DC (I) NO. 26548-SA DT.25.11.10 IN FINISHED CONDITION NOTE: IC WILL BE SUPPLIED BY SAF AGAINST BANK GURANTEE C Estab
2) HOUSING REAR SIGHT NO ARDE SK 3143 83 for LMG 5 56 mm Description : HOUSING REAR SIGHT NO ARDE SK 3143 83 for LMG 5 56 mm() Specification : HOUSING REAR SIGHT TO DRG.NO.ARDE SK 3143/83 DS CAT NO.1005-008012 DC NO.26516-SA DT-26.06.10 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4362 AMPSON ENGINEERING PVT. LTD.
PLOT NO. N-26, MIDC TARAPUR BOISAR, DISTRICT-PALGHAR, MAHARASHTRA
PIN1 : 401506
Phone No. : 9892288803 		AAACA3817G

Download 		1Machine Tool Proto Type Factory

[ENR Registration]
Name Specification Use Status
1) 7112305004 MED SUPPORT OF 155M MM EDP FUZE AS PER DRG NO 770 28 33 00 Description : 7112305004 MED SUPPORT OF 155M MM EDP FUZE AS PER DRG NO 770 28 33 00() Specification : 7112305004 MED SUPPORT OF 155M MM EDP FUZE AS PER DRG NO 770 28 33 00 C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) MODE SELECTOR SWITCH HOUSING ASSEMBLY AS PER ODC MTPF DRG NO 740 13 21 00 Description : MODE SELECTOR SWITCH HOUSING ASSEMBLY AS PER ODC MTPF DRG NO 740 13 21 00() Specification : MODE SELECTOR SWITCH HOUSING ASSEMBLY AS PER ODC/MTPF DRG NO 740-13-21-00 C Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) NOSE OGIVE AS PER ODC MTPF DRG NO 140 01 12 00 Description : NOSE OGIVE AS PER ODC MTPF DRG NO 140 01 12 00() Specification : NOSE OGIVE AS PER ODC/MTPF DR NO.140-01-12-00 C Estab
2) MODE SELECTOR SWITCH ASSEMBLY AS PER ODC MTPF DRG NO 740 13 23 00 Description : MODE SELECTOR SWITCH ASSEMBLY AS PER ODC MTPF DRG NO 740 13 23 00() Specification : MODE SELECTOR SWITCH ASSEMBLY AS PER ODC/MTPF DRG.NO.740-13-23-00 C Estab
3) LOWER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 32 00 Description : LOWER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 32 00() Specification : LOWER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC/MTPF DRG NO 770-22-32-00 C Estab
4) UPPER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 31 00 Description : UPPER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 31 00() Specification : UPPER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC/MTPF DRG NO 770-22-31-00 C Estab
5) ELECTRONIC MODULE HOUSING AS PER ODC MTPF DRG NO 740 12 21 00 Description : ELECTRONIC MODULE HOUSING AS PER ODC MTPF DRG NO 740 12 21 00() Specification : ELECTRONIC MODULE HOUSING AS PER ODC/MTPF DRG NO.740-12-21-00 C Estab
6) BAKELITE WASHER FOR 155 MM ELECTRONIC FUZE Description : BAKELITE WASHER FOR 155 MM ELECTRONIC FUZE() Specification : BAKELITE WASHER FOR 155 MM ELECTRONIC FUZE C Estab
Category : ddp
Grade : 1
Size : S
4363 SATLUZ ENGINEERING PVT LTD
28 B INDUSTRIAL ESTATE DADA NAGAR KANPUR Uttar Pradesh
PIN1 : 208022
Phone No. : 2231675 		AACCS6322A

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PLASTIC MOULDED BOX FOR REVOLVER Description : PLASTIC MOULDED BOX FOR REVOLVER() Specification : PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2, C Estab
Category : ddp
Grade : 3
Size : S
1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III Description : GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III() Specification : AS PER DRG. NO. 32-0800 & 32-0900 C Estab
2) MAIN SPRING SWIVEL MK-III Description : MAIN SPRING SWIVEL MK-III() Specification : AS PER FGK DRG.NO. 32-0121 MK-III C Estab
3) NIRBHEEK GRIP(R) & GRIP(L) SUB ASSY Description : NIRBHEEK GRIP(R) & GRIP(L) SUB ASSY() Specification : NIRBHEEK GRIP(R) & GRIP(L) SUB ASSY AS PER DRG. NO. SK01690 C Estab
4) PLASTIC MOULDED REV. BOX Description : PLASTIC MOULDED REV. BOX() Specification : AS PER FGK FOR REV. 0.32 C Estab
5) SPRING Description : SPRING() Specification : AS PER DRG.NO.2A26-02-105 C Estab
Category : s
Grade : 3
Size : S
4364 ROHIT RUBBER PRODUCTS
W-66,S-BLOCK, MIDC,BHOSARI BHOSARI PUNE Maharashtra
PIN1 : 411026
Phone No. : 27120224 		AACFR2764G

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SEALING RING TO CQA AMMN DRG NO 3 016919 DET 35 DC I 36861 A DT 30 10 2002 Description : SEALING RING TO CQA AMMN DRG NO 3 016919 DET 35 DC I 36861 A DT 30 10 2002() Specification : SEALING RING TO CQA (AMMN)DRG.NO.3-016919 DET-35 DC(I)36861-A DT.30.10.2002 C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6432100100 REPLACEMENT OF SILICON RUBBER SEAL Description : 6432100100 REPLACEMENT OF SILICON RUBBER SEAL() Specification : REPLACEMENT OF SILICON RUBBER SEAL OF STEEL CUP FOR 120 MM FSAPDS & HESH C Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) WASHER (ACROLUNITRILE BUTADINE RUBBER COMPOUND Grade E ) FOR SHELL 155MM ILLG Naschem M1A1 Description : WASHER (ACROLUNITRILE BUTADINE RUBBER COMPOUND Grade E ) FOR SHELL 155MM ILLG Naschem M1A1() Specification : DRG. NO. 155-1120 C Estab
Category : p
Grade : 2
Size : S
1Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) WASHER RUBBER FOR BOMB 3 KG PRACTICE Description : WASHER RUBBER FOR BOMB 3 KG PRACTICE() Specification : WASHER RUBBER TO DRG.NO.ARDE 2024 DET NO.25 AL NO 671 DATED 29/05/91 SPECN;IND/ME/584(f) CLASS D DC NO.3754-ME DT.12/12/2002. C Estab
2) RUBBER RING FOR BOMB 81MM ILLG. Description : RUBBER RING FOR BOMB 81MM ILLG.() Specification : DRG NO ARDE 1965 DET 25 PT NO ITV 134 C Estab
3) O RING FOR MORTAR BOMB 81MM ILLG 2A Description : O RING FOR MORTAR BOMB 81MM ILLG 2A() Specification : CQA(A) 2345 (C) [DRG. NO. ARDE 2222, DET 6, PART NO ITV 263] C Estab
4) O RING 2MM FOR 51MM ILLG. ITV Description : O RING 2MM FOR 51MM ILLG. ITV() Specification : SPECN. CQA(A) 2328(d) DRG. NO. ARDE 2064 (DET 6) PT NO. ITV 224 C Estab
5) RUBBER WASHER FOR MORTAR BOMB 51MM ILLG Description : RUBBER WASHER FOR MORTAR BOMB 51MM ILLG() Specification : CQA(A) 2328(C)[DRG.NO. ARDE 2064, Det No. 17, Part No ITV 234] C Estab
6) O RING 61 X 2 MM FOR 84 MM ILLG. Description : O RING 61 X 2 MM FOR 84 MM ILLG.() Specification : DRG.NO.F-1301-055320 C C Estab
7) O RING 69.5 DIA FOR 84 MM ILLG. Description : O RING 69.5 DIA FOR 84 MM ILLG.() Specification : DRG.NO.F-1301-054930 C C Estab
8) RUBBER RING FOR 84 MM ILLG. Description : RUBBER RING FOR 84 MM ILLG.() Specification : RUBBER RING TO DRG.NO.F-1301-047940-D DC 34802 A NATURALRUBBER TO SPECN.IND/ME/728 COMPUND Z-14-C. C Estab
9) RUBBER WASHER FOR 105 MM ILLG. Description : RUBBER WASHER FOR 105 MM ILLG.() Specification : DRG.ARDE 9769 DET NO 18 PART NO.ISX 432 C Estab
Category : p
Grade : 2
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SEALING RING TO CQA AMMN DRG NO 3 016919 DET 4 DC I 36861 A DT 30 10 2002 Description : SEALING RING TO CQA AMMN DRG NO 3 016919 DET 4 DC I 36861 A DT 30 10 2002() Specification : SEALING RING TO CQA(AMMN) DRG.NO.3-016919 DET.4 DC(I)36861-A DT.30.10.2002 C Estab
2) SEALING RING TO CQA AMMN DRG NO 3 016919 DET 35 DC I 36861 A DT 30 10 2002 Description : SEALING RING TO CQA AMMN DRG NO 3 016919 DET 35 DC I 36861 A DT 30 10 2002() Specification : SEALING RING TO CQA (AMMN)DRG.NO.3-016919 DET-35 DC(I)36861-A DT.30.10.2002 C Estab
Category : ddp
Grade : 1
Size : S
4365 Puspa Machines & Tools
32/3, S.N.Paul Road, Ariadha S.N.Paul Road Kolkata West Bengal
PIN1 : 700057
Phone No. : 8017471688 		AFVPP4067J

Download 		1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BUSH TO SK NO OTF DD 013 IN FC Description : BUSH TO SK NO OTF DD 013 IN FC() Specification : AS PER DRG C Estab
2) PLATE TO DET No 2 8 OF DRG NO SK NO OTF DD 016 Description : PLATE TO DET No 2 8 OF DRG NO SK NO OTF DD 016() Specification : AS PER DRG. C Estab
Category : ddp
Grade : 3
Size : S
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BODY SUB ASSY DET Cd 3 TO DRG NO 3 022859 TO SK NO OTF SE 010 IN F C Description : BODY SUB ASSY DET Cd 3 TO DRG NO 3 022859 TO SK NO OTF SE 010 IN F C() Specification : AS PER DRG. & SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) GUARD HAND ASSEMBLY (UPPER) DRG NO:1005-560046 Description : GUARD HAND ASSEMBLY (UPPER) DRG NO:1005-560046() Specification : AS PER DRG. C Estab
2) 18.CATCH COCKING HANDLE(D/BLUE) DRG NO:1005-560839 Description : 18.CATCH COCKING HANDLE(D/BLUE) DRG NO:1005-560839() Specification : AS PER DRG. C Estab
3) GUARD HAND ASSEMBLY TO DS CAT NO1005 007775 Description : GUARD HAND ASSEMBLY TO DS CAT NO1005 007775() Specification : GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR COD C Estab
4) CATCH COCKING HANDLE (MOULDING) FOR SMALL ARMS Description : CATCH COCKING HANDLE (MOULDING) FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
Category : p
Grade : 3
Size : S
4366 MITHILA ENTERPRIES
107/254,NEHRU NAGAR, KANPUR. NEHRU NAGAR KANPUR UTTAR PRADESH
PIN1 : 208012
Phone No. : 9415426719 		AKEPA5058B

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BUSHING DRG.NO.2A26-02-154 Description : BUSHING DRG.NO.2A26-02-154() Specification : BUSHING DRG.NO.2A26-02-154 C Estab
2) BUSHING Description : BUSHING() Specification : AS PER DRG.NO. SP-00037 C Estab
3) DIES Description : DIES() Specification : AS PER DRG. & SPECIFICATION E Estab
4) CLOSED DIE FORGINGS OF PINIONS AND GEARS OF WEIGHT 50 TO 350 KGS. Description : CLOSED DIE FORGINGS OF PINIONS AND GEARS OF WEIGHT 50 TO 350 KGS.() Specification : AS PER FGK REQUIREMENT E Estab
5) All types of Rubber Mounded components i.e " O" Rings, Seals, Gasket, Rubber Mountings, Bushes, Grom Description : All types of Rubber Mounded components i.e " O" Rings, Seals, Gasket, Rubber Mountings, Bushes, Grom() Specification : As per FGK requirement E Estab
6) SCREW Description : SCREW() Specification : AS PER SPECIFICATION C Estab
7) INSULATION SLEEVING Description : INSULATION SLEEVING() Specification : AS PER DRG.NO. 5970-002854 C Estab
8) INSULATOR LOWER DRG.NO.2A26-02-269 Description : INSULATOR LOWER DRG.NO.2A26-02-269() Specification : INSULATOR LOWER DRG.NO.2A26-02-269 C Estab
9) INSULATOR UPPER DRG.NO.2A26-02-268 Description : INSULATOR UPPER DRG.NO.2A26-02-268() Specification : INSULATOR UPPER DRG.NO.2A26-02-268 C Estab
10) LOCK DRG.NO.2A26-02-128 Description : LOCK DRG.NO.2A26-02-128() Specification : LOCK DRG.NO.2A26-02-128 C Estab
11) PLATE DRG.NO.2A26-02-267 Description : PLATE DRG.NO.2A26-02-267() Specification : PLATE DRG.NO.2A26-02-267 FOR 125MM TANK GUN C Estab
12) PLUG DRG.NO.2A26-02-125 Description : PLUG DRG.NO.2A26-02-125() Specification : PLUG DRG.NO.2A26-02-125 C Estab
13) PLUNGER DETENT Description : PLUNGER DETENT() Specification : PLUNGER DETENT DRG.NO.ILG-153 C Estab
14) ALL TYPES OF HELICAL COMPRESSION, EXTENSION AND TORSION SPRING Description : ALL TYPES OF HELICAL COMPRESSION, EXTENSION AND TORSION SPRING() Specification : AS PER DRG. & SPECIFICATION C Estab
15) RING DRG NO: 2A26-02-122. Description : RING DRG NO: 2A26-02-122.() Specification : RING DRG NO: 2A26-02-122. C Estab
16) MACHINING Description : MACHINING() Specification : AS PER SPECIFICATION R Estab
17) MACHINING OF COMPONENTS Description : MACHINING OF COMPONENTS() Specification : AS PER SPECIFICATION R Estab
18) ARM (155mm FH Gun) Description : ARM (155mm FH Gun)() Specification : AS PER DRG. NO. 6363094 C Estab
19) SET OF TRIMMING DIE & PUNCH Description : SET OF TRIMMING DIE & PUNCH() Specification : SET OF TRIMMING DIE & PUNCH E Estab
20) FIXTURES, DESIGN & DEVELOPMENT Description : FIXTURES, DESIGN & DEVELOPMENT() Specification : AS PER SPECIFICATION E Estab
21) SPACER Description : SPACER() Specification : AS PER DRG.NO. 1015-000214 C Estab
22) ALL TYPES OF COILED SPRING FOR ORDNANCE Description : ALL TYPES OF COILED SPRING FOR ORDNANCE() Specification : AS PER FGK DRG (FROM 0.3-8.0 mm Dia) C Estab
23) ALL TYPES OF SPRING FOR REV. .32 Description : ALL TYPES OF SPRING FOR REV. .32() Specification : AS PER FGK DRG C Estab
24) WASHER SPRING Description : WASHER SPRING() Specification : AS PER DRG. NO.SP-00007,5310-001473 C Estab
25) STRIP TO FGK DRG. NO. T-90/SK/0009 FOR STORE DRG. NO. 2A46M.02-148 Description : STRIP TO FGK DRG. NO. T-90/SK/0009 FOR STORE DRG. NO. 2A46M.02-148() Specification : STRIP TO FGK DRG. NO. T-90/SK/0009 FOR STORE DRG. NO. 2A46M.02-148 REQUIRED FOR T-90 ORDNANCE C Estab
26) PLATE STUD BAYONET Description : PLATE STUD BAYONET() Specification : AS PER DS CAT NO. 1005-000800 C Estab
27) WASHER Description : WASHER() Specification : AS PER NASK 782/2/3 C Estab
Category : s
Grade : 3
Size : S
4367 AMIT TRADING COMPLEX
CHAMBER BUILDING, CIVIC CENTRE MARHATAL, JABALPUR M.P
PIN1 : 482002
Phone No. : 07612743368 		482002A989

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) OIL CASTOR 1ST LF 1035725003 Description : OIL CASTOR 1ST LF 1035725003() Specification : OIL CASTOR TO FIRST SPECIAL GRADE TO SPECN-IS-435-1973 (2nd Revision) (REAFFIRMED 2013) DC NO.5227-ME DT.12/04/2014.AMD.4 MARCH 2002. R Estab
2) PLATE HOOK LF 1705010043 Description : PLATE HOOK LF 1705010043() Specification : PLATE HOOK-DRG NO.I.A.793 PART NO.ISV-7. R Estab
3) SCREW WOOD MS LF 1737000606 Description : SCREW WOOD MS LF 1737000606() Specification : SCREW WOOD MILD STEEL GALVANISED CSK HEAD 3/4" X 6 GAUGE TO SPECN:-IS-451: 1972.(2ND REV.)AMENDMENT 1 JUNE 1975. R Estab
4) SCREW WOOD MS LF 1737000806 Description : SCREW WOOD MS LF 1737000806() Specification : SLOTTED CONUTER SUNK HEAD WOOD SCREW GALVANISHED NO. 8 X 20 MM TO SPECN:- IS-6760-1972 STEEL R Estab
5) RIVET MS FLAT HD 5X24MM LONG GALV LF 1745010310 Description : RIVET MS FLAT HD 5X24MM LONG GALV LF 1745010310() Specification : RIVET MILD STEEL GALVANISED FLAT HEAD 5 MM X 24 MM LONG TO SPECN:-IS-2155-1982 WITH AMENDMENT NO 1 OF DEC.1984FIRST REVISION. R Estab
6) NAIL WIRE IRON RD SHANK LF 1753011216 Description : NAIL WIRE IRON RD SHANK LF 1753011216() Specification : NAILS WIRE (GALVANISHED) IRON ROUND SHANK 1-3/4" X 12G TO SPECN:- IS-723:1972.REAAFFIRMED-2001 (SECOND REVISION) R Estab
7) COPPER TACKS LF 1753850004 Description : COPPER TACKS LF 1753850004() Specification : COPPER TACKS 1/2" LENGTH X 1.5 MM DIA. R Estab
8) THREAD COTTON LF 2101779885 Description : THREAD COTTON LF 2101779885() Specification : THREAD COTTON SEWING BLEACHED UNDYED & PROOFED 16 TEX X 6 IN CAP. OF 400 MTRS TO SPECN:- JSS-8310-02;2016 REV.NO.3 R Estab
9) STEEL SCREW FOR MULTIMODE GRENADE LF 9911357649 Description : STEEL SCREW FOR MULTIMODE GRENADE LF 9911357649() Specification : STEEL SCREW TO DRG.NO.TRD -1-2-1933. R Estab
Category : s
Grade : 3
Size : S
4368 MAHAVEER CHEMICAL INDUSTRIES
54, AKS NAGAR PONNAIYARAJAPURAM, COIMBATORE TAMIL NADU
PIN1 : 641001
Phone No. : 0422-2470367
GSTIN : 33AAAHR5227E2ZI 		AAAHR5227E

Download 		1Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CARBON BLACK Description : CARBON BLACK() Specification : CARBON BLACK. SPECN: JSS 6810-81: 2016 (REV No.3) DS CAT No.:- CARBON BLACK TYPE-4 6810-001130 DC No. 5490-ME DT. 24-09-2016 R Estab
Category : s
Grade : 3
Size : S
4369 ROCKWELL ENTERPRISES,
26 MIG., S.B.I. COLONY, BARRA-3, KANPUR - 208022 KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : 9415041047 		AAKFR1725M

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) PRESS TOOL & DIES Description : PRESS TOOL & DIES() Specification : PRESS TOOL FOR TRIGGER LOCK C Estab
2) FIXTURES Description : FIXTURES() Specification : DRILLING FIXTURE E Estab
3) FINISH CASTING OF BODY LOCK SAFETY 161 682 Description : FINISH CASTING OF BODY LOCK SAFETY 161 682() Specification : BODY LOCK SAFETY C Estab
4) HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS) Description : HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS)() Specification : T/S LUGGED HOLE MILL SIZE 17.75 MM S Estab
5) SOLID CARBIDE CUTTING TOOLS (DRILLS, REAMERS, BALL NOSE, PROFILE TOOLS) Description : SOLID CARBIDE CUTTING TOOLS (DRILLS, REAMERS, BALL NOSE, PROFILE TOOLS)() Specification : U DRILL HOLDER R 416.2-0240 L251 S Estab
6) HSS TWIST DRILL P.S S-10.2MM DIA LS Description : HSS TWIST DRILL P.S S-10.2MM DIA LS() Specification : DELTA DRILL DIA 14.0 S Estab
7) FIXTURES, DESIGN & DEVELOPMENT Description : FIXTURES, DESIGN & DEVELOPMENT() Specification : SHIM DESIGN REF ARDE 1279/133 E Estab
8) FINISH MACHINING OF INSERT Description : FINISH MACHINING OF INSERT() Specification : SET OF SIX TYPE INSERT S Estab
9) EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN. Description : EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.() Specification : EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN. C Estab
10) CRANK Description : CRANK() Specification : CRANK RETARACTING FIRING NEEDLE FOR C Estab
11) FEEDER LEVER DRG.6380630 Description : FEEDER LEVER DRG.6380630() Specification : FEEDER LEVER DRG.6380630 C Estab
12) BOLTS Description : BOLTS() Specification : AS PER DRG. NO. 2A46-01-31 C Estab
13) SCREW Description : SCREW() Specification : AS PER DRG.NO. 5305-003128 C Estab
14) FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32. Description : FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32.() Specification : FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32. C Estab
15) FINISH MACHINING OF VARIOUS COMPONENTS INVOLVING PRECISION MACHINING AND SUBASSEMBIES, SSEMBLIES THE Description : FINISH MACHINING OF VARIOUS COMPONENTS INVOLVING PRECISION MACHINING AND SUBASSEMBIES, SSEMBLIES THE() Specification : FINISH MACHINING OF BALANCE E Estab
16) GAUGES Description : GAUGES() Specification : GAUGE T-90 E Estab
17) TOOLS Description : TOOLS() Specification : TOOL HOLDER A/W INSERT DIA 20MM S Estab
18) PIN Description : PIN() Specification : AS PER DRG. NO. 5315-000973 C Estab
19) PRE MACHINING OF STOP CARTRIDGE BASE Description : PRE MACHINING OF STOP CARTRIDGE BASE() Specification : PRE MACHINING OF STOP CARTRIDGE BASE C Estab
20) INSULATOR Description : INSULATOR() Specification : PRE MACHINING INSULATOR C Estab
21) SPARE BARREL DRG. NO. 75-2012, 75-2015 AND WOODEN PACKING BOXES FOR OTHER BARRELS ETC. Description : SPARE BARREL DRG. NO. 75-2012, 75-2015 AND WOODEN PACKING BOXES FOR OTHER BARRELS ETC.() Specification : THREE TYPE SPARE E Estab
22) SET OF TRIMMING DIE & PUNCH Description : SET OF TRIMMING DIE & PUNCH() Specification : SET OF TRIMMING DIE & PUNCH E Estab
23) WASHER Description : WASHER() Specification : AS PER DRG.NO. SP OF 155 FH C Estab
24) SLIDE BAR SIZE- 400X125X65 AS PER DRG. NO.3048396 Description : SLIDE BAR SIZE- 400X125X65 AS PER DRG. NO.3048396() Specification : BORING BAR 12 DIA S12M SCLCL/R09. E Estab
Category : p
Grade : 3
Size : S
4370 NOVATECK
5-35-269, SHAKTIPURAM, APIIC ROAD, KUKATPALLY HYDERABAD TELANGANA
PIN1 : 500072
Phone No. : 04023078678 		AARPM1215C

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) DETONATOR CONTACT ASSEMBLY AS PER ODC MTPF DRG NO 770 12 26 00 Description : DETONATOR CONTACT ASSEMBLY AS PER ODC MTPF DRG NO 770 12 26 00() Specification : DETONATOR CONTACT ASSEMBLY AS PER ODC/MTPF DRG NO 770-12-26-00 C Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) PIN AND HOUSING ASSEMBLY GRAZE SWITCH AS PER ODC MTPF DRG NO 740 22 32 00 Description : PIN AND HOUSING ASSEMBLY GRAZE SWITCH AS PER ODC MTPF DRG NO 740 22 32 00() Specification : PIN & HOUSING ASSEMBLY (GRAZE SWITCH) AS PER ODC/MTPF DRG.NO.740-22-32-00 C Estab
2) BALL AND HOUSING ASSEMBLY IMPACT SWITCH AS PER ODC MTPF DRG NO 740 24 33 00 Description : BALL AND HOUSING ASSEMBLY IMPACT SWITCH AS PER ODC MTPF DRG NO 740 24 33 00() Specification : BALL AND HOUSING ASSEMBLY (IMPACT SWITCH) AS PER ODC/MTPF DRG NO.740-24-33-00 C Estab
Category : ddp
Grade : 1
Size : S
4371 swastik
nagpur nagpur maharashtra
PIN1 : 441906
Phone No. : 07122256 		145678

Download 		1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) SULPHURIC ACID Minimum 98% Strength Description : SULPHURIC ACID Minimum 98% Strength() Specification : IS:266:1993 Third Rev Reaffirmed-2003 ammed-1 R Estab
2) Aluminium Stearate Description : Aluminium Stearate() Specification : ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.. R Estab
3) Ether Solvent Grade Description : Ether Solvent Grade() Specification : Specn. No. IS:336-1973 ( second Revision ) reaffirmed - 2002 D.C. 3811- ME Dtd 05-05-04 R Estab
4) ETHYLENE GLYCOL Description : ETHYLENE GLYCOL() Specification : ETHYLENE GLYCOL MONOETHYLETHER (CELLOSOLVE SOLVENT) SPECN. NO. IND/ME/422 (a) 3754-ME-DT.12.12.2002. R Estab
Category : s
Grade : 3
Size : S
4372 AISHWARYA ELECTRICALS PVT.LTD.
F1/C,SITE NO.1,PANKI INDUSTR. PANKI INDUSTRIAL AREA,KANPUR-208020 KANPUR UTTAR PRADESH
PIN1 : 208020
Phone No. : 9839033104 		AABCA6852A

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III Description : GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III() Specification : AS PER DRG. NO. 32-0800 & 32-0900 E Estab
Category : s
Grade : 3
Size : S
4373 MOHAN ENGINEERING
W 110, MIDC Hingna Nagpur MAHARASHTRA
PIN1 : 440016
Phone No. : 9423680887
GSTIN : 27ACMPK8779N1ZG 		ACMPK8779N

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 Description : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 C Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Nonestab
2) COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 022[00]() Specification : as per Drawing C Nonestab
Category : p
Grade : Grade III
Size : SS
4374 SHIVATHENE LINOPACK
PLOT NO.1A, SECTOR- 3, INDUSTRIAL AREA PARWANOO, DIST- SOLAN H. P.
PIN1 : 173220
Phone No. : 1792233115 		AACCS1454K

Download 		1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Resin Shivapol 709 Description : Resin Shivapol 709() Specification : RESIN-SHIVAPOL 709. SPECN-(i) DENSITY AT 25 DEG CENT(G/CM- CUBE)-1.0 -0.05(ii)VISCOSITY AT 25 DEG CENT (CPS),900-1200 (iii)HYDROXYL VALUE(MG OF KOH/G),130-150(iv)ACID VALUE(MG/KO H/G),MAX 0.1(v)MOISTURE(%)MAX 0.5,(vi)MOLECULAR WEIGHT(Mn) R Estab
2) Melamine Make China/Indonesia Description : Melamine Make China/Indonesia() Specification : MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICL R Estab
Category : p
Grade : 3
Size : S
4375 MULTIMETALS LIMITED
HEAVY INDUSTRIAL AREA KAUSUA ROAD KOTA RAJASTHAN
PIN1 : 324003
Phone No. : 0744-3008510 		AKIPM8881H

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) DRIVING BAND BLANK AS PER CQA DRG NO 155 1030 Description : DRIVING BAND BLANK AS PER CQA DRG NO 155 1030() Specification : DRIVING BAND BLANK AS PER CQA(A) KIRKEE ASSEMBLY DRAWING NO 155-1030 2439A 11002 AND DESIGNER'S REF NO. 155-1060 DC 36792-A DT. 01-11-01 R Estab
2) COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 022 Description : COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 022() Specification : as per Drawing R Estab
3) COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 095 Description : COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 095() Specification : as per drawing R Estab
4) Second Driving Band Blank to OFAJ Drg No SM 213 K Description : Second Driving Band Blank to OFAJ Drg No SM 213 K() Specification : AS PER OFAJ Drg. No.SM-213 K. R Estab
5) Driving Band Blank to OFAJ Drg No SM 214 M Description : Driving Band Blank to OFAJ Drg No SM 214 M() Specification : AS PER DRAWING R Estab
Category : ddp
Grade : 1
Size : L
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 0.42MM TH X39.5MM WIDE() Specification : JSS-9535-02-2008 Rev.3 R Estab
2) BRASS STRIP 113MM WIDE X 0.40MM THICK() Specification : JSS 9535-02:2008 REV. 3. R Estab
3) BRASS STRIP 0.40MM X 38MM WIDE() Specification : JSS-9535-02 - 2008 Rev. No. 3 R Estab
4) BRASS STRIP 35.6MM WIDE X 0.58MM TH() Specification : JSS-9535 - 02 - 2008 REV. NO. 3 R Estab
Category : p
Grade : 3
Size : L
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 0.42MM TH X39.5MM WIDE() Specification : JSS-9535-02-2008 Rev.3 R Estab
2) BRASS STRIP 113MM WIDE X 0.40MM THICK() Specification : JSS 9535-02:2008 REV. 3. R Estab
3) BRASS STRIP 0.40MM X 38MM WIDE() Specification : JSS-9535-02 - 2008 Rev. No. 3 R Estab
4) BRASS STRIP 35.6MM WIDE X 0.58MM TH() Specification : JSS-9535 - 02 - 2008 REV. NO. 3 R Estab
Category : p
Grade : 3
Size : L
4376 KASTURI LAL & SONS
M-7, INDUSTRIAL AREA, RAILWAY STATION JAGADHRI, YAMUNA NAGAR, HARYANA
PIN1 : 135001
Phone No. : 01732-250608 		AACFK3691D

Download 		1Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) UNIT LOAD FOR CH 8 AND 9 Description : UNIT LOAD FOR CH 8 AND 9() Specification : UNIT LOAD FOR 155 MM CHARGE 8 & 9 TO BOFORS DRG.No.4085565 AND 4085566 AND AS PER CFA DRG.No.13 S 002 INCORPORATING THE SUGGESTIONS OF CQA(A), KADKI, VIDE THEIR LETTER No.QA 17553/GEN/VIII DATED 30/03/1995. R Estab
Category : p
Grade : 3
Size : S
4377 TRIESS ENGINEERS
NEW NO.-3, PLOT NO.-35, GANESH NAGAR 5TH STREET, G.K. INDUSTRIAL ESTATE ALAPPAKKAM, PORUR CHENNAI T.N.
PIN1 : 600116
Phone No. : 9444042729 		ABEPS1123M

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) 20.UNIT BURST CONTROL DRG NO:1005-007791 R5 Description : 20.UNIT BURST CONTROL DRG NO:1005-007791 R5() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
4378 NEMANI POLY PRODUCTS (P)LTD.
UNIT-II,SHED-B,PLOT 24-A,BAJRA NG BALI AUDYOGIC ASTHAN,BATTA, AREA,PANKI UDYOG NAGAR,KANPUR KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : 0512-3291348 		AAACN4829R

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) SPRING MAIN TO DRG. NO.32-0106 Description : SPRING MAIN TO DRG. NO.32-0106() Specification : SPRING MAIN TO DRG. NO.32-0106 MATERIAL SPRING STEEL, Gr- 4, IS: 4454 (Pt-1)-81 C Estab
Category : ddp
Grade : 3
Size : S
1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) SPRING MAIN TO DRG. NO.32-0106 Description : SPRING MAIN TO DRG. NO.32-0106() Specification : SPRING MAIN TO DRG. NO.32-0106 MATERIAL SPRING STEEL, Gr- 4, IS: 4454 (Pt-1)-81 C Estab
Category : ddp
Grade : 3
Size : S
4379 PONDY OXIDES & CHEMICALS
KRM CENTRE 4TH FLOOR, 2, HARRINGTON ROAD, CHETPET CHENNAI TAMILNADU
PIN1 : 600031
Phone No. : 04442965455 		CHEPO2071G

Download 		1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Litharge (Lead Mono Oxide) Description : Litharge (Lead Mono Oxide)() Specification : LITHARGE (LEAD MONOXIDE) CONFORMING TO THE FOLLOWING SPECN. A) APPEARANCE: YELLOW POWDER B) LEAD MONOXIDE (PbO) CONTENT : MIN. 96%. C) ALKALINE IMPURITIES AS (CaO): 0.002% MAX. D) GRANULATION: MAX.5.0% RETAINED ON 250 MICROMTER I.S.SIEV R Estab
Category : dp
Grade : 3
Size : S
4380 Radiant Organics Pvt Ltd
6 Juhu Sea View Juhu tara Road Sanatcruz west Mumbai Maharashtra
PIN1 : 400049
Phone No. : 26609358
GSTIN : 27AACCR4078A2ZK 		MUMRO7292F

Download 		1Ordnance Factory Bhandara

Name Specification Use Status
1) ACETIC ANHYDRIDE FOR HMX PLANT1[10]() Specification : ACETIC ANHYDRIDE : PURITY - 97.5% MIN. COLOUR - 10 APHA MAX AND SUSPENDED MATTER - NIL. R Estab
Category : p
Grade : Grade III
Size : M

Copyright © 2025 - OFB