List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4161 ASHRON ENGINEERS
D49, MIDC TASAWADE, KARAD, SATARA TASAWADE KARAD Maharashtra
PIN1 : 415109
Phone No. : 27551974
GSTIN : 27AETPB0001K1ZT 		AETPB0001K

Download 		1) Ordnance Factory Bhusawal
Name Specification Use Status
1) 0142900015 STEEL CONTAINER FOR STEEL PACK[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM[63]() Specification : IS:2062 P Nonestab
Category : p
Grade : Grade III
Size : S
4162 Tanishq Wire & Conductors Pvt. Ltd.
Shop No.10, 1st Floor, 502 C, Shiv Market Ashok Vihar, Delhi-110052 Ashok Vihar, Delhi Delhi
PIN1 : 110052
Phone No. : 47050446
GSTIN : 07AAACT9417F3ZA 		DELT07606E

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM[63]() Specification : IS:2062 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030114 MS PLATE SIZE 6MM[01]() Specification : IS 2062-1994 C Nonestab
2) 0133030109 MS PLATE SIZE 25MM[01]() Specification : IS 2062-1994 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300008 MS PLATE 3MM TH PHOS ERA[64]() Specification : IS:2062-1994 C Estab
2) 0133030116 MS PLATE SIZE 1200 MM[01]() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030112 MS PLATE SIZE 1100[01]() Specification : MS PLATE OF SIZE-1100 X 100 X 10MM (IS 2062-1994 OF ANYGRADE) C Nonestab
2) 0133030115 MS PLATE SIZE 400[01]() Specification : MS PLATE OF SIZE 400 X 200 X 6MM (IS 2062-1994 OF ANYGRADE) C Nonestab
3) 0133030113 MS PLATE SIZE 450 MM[01]() Specification : MS PLATE OF SIZE 450 X 450 X 50MM (IS-2062-1994 OF ANYGRADE) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 31 75X0 558MM LF 0710760997 Description : BRASS STRIP 31 75X0 558MM LF 0710760997() Specification : BRASS STRIP 31.75+/-0.50MM WIDEX 0.558+/- 0.0254 MM THICK (1.25 X 0.022" (24 SWG) SPECN : IS-410.-1977 (THIRD REV.)(REAFFIRMED-2006) WITH AMENDMENT NO.1 APRIL-1981 CU ZN 30 CONDITION (a). R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SINGLE CORE TEFLON INSULATED SILVER PLATED COPPER WIRE[07]() Specification : SPECN. NO.JSS-51004 OR 51034 DRG.NO.HEMRL/1195 (FILLED) DET.NO.2, R.NO.6 DT. 10-11-2006. P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHEET MS 2500 x 1000 x 1 6 mm IS513 CR DD LF 0121020016 Description : SHEET MS 2500 x 1000 x 1 6 mm IS513 CR DD LF 0121020016() Specification : C.R. SHEETS TO SPECN: IS-513-2008 (FIFTH REVISION) (REAFFIRMED 2013)-DD ANNEALED AND SKIN PASSED CONDICTION 2500 MM X 1000 MM X 1.6 MM. R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036 Description : Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036() Specification : Steel strip cold rolled closed annealed bright finished 3.56(+0.10/-0.00) mm thick X 80 +/-0.25mm wide in length of 2 mtrs to specn:- IS-513:2008 (Fifth Revision) Grade "DD" Temper 5(Annealed) R Nonestab
2) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020 Description : copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020() Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652 R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL STRIP 85X2 0MM IS 513 BS1449 LF 0101061530 Description : STEEL STRIP 85X2 0MM IS 513 BS1449 LF 0101061530() Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL STRIP 100 0 5MM 26BG IS513 CR LF 0133090563 Description : STEEL STRIP 100 0 5MM 26BG IS513 CR LF 0133090563() Specification : MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISHTO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLLSHOULD BE BETWEEN 50 KG TO 100 KG. C Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS ROD 8 5 MM LF 0711906011 Description : BRASS ROD 8 5 MM LF 0711906011() Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 24 0 457MM IS 410CUZN30 LF 0710661145 Description : BRASS STRIP 24 0 457MM IS 410CUZN30 LF 0710661145() Specification : BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION. R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025 Description : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025() Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A) P Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) SELF ADHESIVE TAPE FOR M-92[25]() Specification/ Drawing No. OFN/BMCS/M91/M92/ Self Adhesive Tape C Estab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) STEEL STRIP 1MM THICK X 90X2M LONG[01]() Specification : STEEL STRIP,1MM THICK X90X2M.L STEEL STRIP 1MM THICK +_.035X 90MM +_.15X2MTS.OR MULTIPLE OF285MM.TO SPECN.BS:1449,PT-I:1983,CS-30(SILICON KILLED)BRIGHT/COLD ROLLED ANNEALED COND. ALT.MATL.BS:1449,PT-I:1983,SEC-4CONDN'A'GRADE-CS-40(SILICON R Nonestab
2) STEEL STRIP 1.8MM +_.06 X270MM[01]() Specification : STEEL STRIP 1.8MM+_.06 X 270MM R Nonestab
Category : s
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) CR SHEET[90]() Specification : CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ALU SHEET 2400X1200X3MM IS737 24345 LF 0615420003[06]() Specification : ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN R Nonestab
2) ALU ALLOY ROD 7 MM IS 733 64430 ITEM CODE 0611505008[06]() Specification : ALUMINIUM ALLOY ROD 7.00(+/-0.05)MM DIA IN STRAIGTH LENGTH OF 2.5 TO 3 METRES TO SPECN.IS:733-1983 DESIGNATION 64430CONDITION "WP" OR IS:733-1983 DESIGNATION 24345 "W" WITHMAXIMUM ALLOWABLE PERIPHERIAL GRAIN GROWTH ON EXTRUDEDSECTION - 5% C Nonestab
3) ALU STRIP 55X0 3MM IS 737 19500 LF 0615361047[06]() Specification : ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BRASS STRIP 22X 0 7MM BS2870CZ106 1 4 LF 0710665195[07]() Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD R Nonestab
2) BRASS STRIP 25 4X0 63 MM LF 0717560949[07]() Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1 R Nonestab
3) COPPER STRIP 15X0 26MM LF 0700661042[07]() Specification : COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDN R Nonestab
4) BRASS STRIP 102 X 3 66 MM BS2871 CZ126 LF 0717560694[07]() Specification : BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED). R Nonestab
5) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020[07]() Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652 R Nonestab
6) COPPER STRIP 16X0 32MM BSEN 1652 LF 0700261016[07]() Specification : COPPER STRIP 16+/-0.2 X 0.32+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BSEN 1652:1998,MATL SYMBOL Cu-ETPMATL CONDN R-220.MATERIAL MUST BE HOMOGENEOUS, FREE FROMBURRS, BOWINESS (MAX) 2MM/MTR.COIL WT.8-10KG. ID WITH NYLONRING 300M R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL STRIP 40x0point35 mm LF 0121060051 Description : STEEL STRIP 40x0point35 mm LF 0121060051() Specification : STEEL STRIP SIZE 40 +/-0.5 MM WIDE X 0.35 +/-0.03 MM THICK TO SPECN:IS-513-2008 (FIFTH REVISION) GR.CR-3 OR GD I CS OFBS-1449-SECTION 1.1:1991 QUALITY IN ANNEALED AND SKIN PASSED CONDITION IN COIL OF 50 KG WEIGHT EACH. R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL TAPE BAND 12 point7 X 0 point45MM ITEM CODE 0133060104 Description : STEEL TAPE BAND 12 point7 X 0 point45MM ITEM CODE 0133060104() Specification : COLD ROLLED STEEL STRIP (STEEL TAPE BANDING) 12.7 MM WIDTH X 0.45MM THICK(26SWG) IN C.R.STEEL STRIPPING SOFT BLUE FINISHHAVE TENSILE STRENGTH 60 TO 80KG/MM SQR WITH SHEAR EDGE IN COIL,OILED WITH SHELL EXISTS 256 WITH WAXED PAPER AND RESI R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6432300008 MS PLATE 3MM TH PHOS ERA Description : 6432300008 MS PLATE 3MM TH PHOS ERA() Specification : IS:2062-1994 P Estab
2) 0145061109 STRIP ST.COLD ROL 0.5MM THX190 MM W Description : 0145061109 STRIP ST.COLD ROL 0.5MM THX190 MM W() Specification : SPECN.IS: 513-1994 (FOURTH REVISION) (AMDT.1) R.A-1998, P Estab
3) 2101773028 TAPE ADHESIVE WP FAB Description : 2101773028 TAPE ADHESIVE WP FAB() Specification : IND/ME/790(A P Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) M S PLATE SZ 3 MM PHOSPATED Description : M S PLATE SZ 3 MM PHOSPATED() Specification : MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3 R Estab
Category : ddp
Grade : 1
Size : S
4163 MECON (INDIA)
1/1GANGULY LANE 3rd FLOOR 1/1 GANGULY LANE KOLKATA West Bengal
PIN1 : 700007
Phone No. : 8910998907
GSTIN : 19ACHPC6036B1Z1 		ACHPC6036B

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS ROD 8 5 MM LF 0711906011 Description : BRASS ROD 8 5 MM LF 0711906011() Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL STRIP 200X1 1MM IS513 BS1449 LF 0101063337 Description : STEEL STRIP 200X1 1MM IS513 BS1449 LF 0101063337() Specification : STEEL STRIP 200+/-0.5 MM WIDE X 1.1+/-0.05 MM THICK TO SPECN IS-513-TYPE DD OR BS-1449 PT-I GR-3,CS OR CR R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025 Description : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025() Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A) R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 22X1 02 MM LF 0710664345 Description : BRASS STRIP 22X1 02 MM LF 0710664345() Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90 R Nonestab
Category : p
Grade : 3
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1737000812 SCREW MS CSK HD[17]() Specification : SCREW WOOD M.S.CSK HEAD IS:451-1972 (R.A - 1996)SIZE - NO. 8 X 30 MM LONG. ( 1 1/4" X 8 GAUGE ) P Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory

[Deemed Registration]
Name Specification Use Status
1) BRASS ROUND 38 POINT 1 PLUS 0POINT25 MM DIA TO SPECN BS 2874 CZ 121 PB3 M IN THE LENGTH OF2 MTRS MINIMUM LONG BAR LATEST ISSUE Description : BRASS ROUND 38 POINT 1 PLUS 0POINT25 MM DIA TO SPECN BS 2874 CZ 121 PB3 M IN THE LENGTH OF2 MTRS MINIMUM LONG BAR LATEST ISSUE() Specification : BRASS ROUND 38.1 +0.25mm DIA TO SPECN BS-2874-CZ-121 PB3-"M" IN THE LENGTH OF2 MTRS (MINIMUM) LONG BAR. LATEST ISSUE R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ELECTROLYTE TIN PLATE Description : ELECTROLYTE TIN PLATE() Specification : AS PER SPECIFICATION C Estab
2) STEEL SHEET Description : STEEL SHEET() Specification : AS PER SPECIFICATION C Estab
3) STEEL ROUND & STRIP Description : STEEL ROUND & STRIP() Specification : AS PER SPECIFICATION C Estab
4) ALUMINIUM ALLOY ROUND Description : ALUMINIUM ALLOY ROUND() Specification : AS PER SPECIFICATION C Estab
5) BRASS STRIP Description : BRASS STRIP() Specification : AS PER SPECIFICATION C Estab
6) Brass Round Description : Brass Round() Specification : AS PER SPECIFICATION C Estab
7) SHUTTER Description : SHUTTER() Specification : AS PER SPECIFICATION C Estab
8) WIRE COPPER FLEXIBLE TWIN TWISTED PVC INSULATED Description : WIRE COPPER FLEXIBLE TWIN TWISTED PVC INSULATED() Specification : AS PER SPECIFICATION C Estab
9) MILD STEEL ELECTRODES Description : MILD STEEL ELECTRODES() Specification : AS PER SPECIFICATION C Estab
10) BALL BEARING Description : BALL BEARING() Specification : AS PER SPECIFICATION C Estab
11) ANGULAR CONTACT BEARING Description : ANGULAR CONTACT BEARING() Specification : AS PER SPECIFICATION C Estab
12) TAPER ROLLER BEARING Description : TAPER ROLLER BEARING() Specification : AS PER SPECIFICATION C Estab
Category : ddp
Grade : 1
Size : S
4164 S R ENGINEERING ENTERPRISE
SADATPUR, MANASINGHAPUR, HOWRAH 711404 HANTAL BARGACHIA ROAD HOWRAH West Bengal
PIN1 : 711404
Phone No. : 8609039416
GSTIN : 19ABPFS6222A1Z6 		ABPFS6222A

Download 		1) Ordnance Factory Bolangir
Name Specification Use Status
1) CASE: DRG.9-04367/9- -104/ 38.310. 032[63]() Specification : CASE: DRG.9-04367/9- -104/ 38.310. 032, DC.NO.36309-A, DT.14.07.97. C Nonestab
2) SLEEVE:DRG.9-04367/9- -104/ 38.316[63]() Specification : SLEEVE:DRG.9-04367/9- -104/ 38.316 .101,DC.NO.36309-A,DT.14.07.97. C Nonestab
3) CAP: DRG.9-04367/9- -104/ 38.320. 262[63]() Specification : CAP: DRG.9-04367/9- -104/ 38.320. 262-DC.NO.36309-A, DT-14.07.97. C Nonestab
4) CUP: DRG.9-04367/9- -104/ 38.350. 189[64]() Specification : CUP: DRG.9-04367/9- -104/ 38.350. 189,DC.NO-36309-A,DT.14.07.97 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) DISC: DRG.9-04367/9- -104/ 38.366. 113[63]() Specification : DISC: DRG.9-04367/9- -104/ 38.366. 113, DC.NO.36309-A, DT-14.07.97. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) LEAD RING TO DRG.NO.b III 8.249.034[64]() Specification : LEAD RING TO DRG.NO.b III 8.249.034 DC NO.36310-A,DT-14.07.97. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) STRIKER Description : STRIKER() Specification : AS PER DRAWING C Estab
2) PIN Description : PIN() Specification : AS PER DRAWING C Estab
3) STOP PIN Description : STOP PIN() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
4165 INDUSTRIAL TUBES MANUFACTURERS PVT.LTD.
G/3, Bachu Bhai Building, 16 Mangesh Shenoy Street,187, Dr. DN Road, FORT- Mumbai-400001(MH) Mangesh Shenoy Street Mumbai Maharashtra
PIN1 : 400001
Phone No. : 2512690022
GSTIN : 08AAACI2822H1ZU 		AAACI2822H

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS TUBE 13 85X10 95X185L IS 407 LF 0717255200 Description : BRASS TUBE 13 85X10 95X185L IS 407 LF 0717255200() Specification : BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB. R Nonestab
Category : p
Grade : 3
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION[07]() Specification : COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERT R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) DRIVING BAND BLANK AS PER CQA DRG NO 155 1030 Description : DRIVING BAND BLANK AS PER CQA DRG NO 155 1030() Specification : DRIVING BAND BLANK AS PER CQA(A) KIRKEE ASSEMBLY DRAWING NO 155-1030 2439A 11002 AND DESIGNER'S REF NO. 155-1060 DC 36792-A DT. 01-11-01 R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) DRIVING BAND BLANK AS PER CQA DRG NO 155 1030 Description : DRIVING BAND BLANK AS PER CQA DRG NO 155 1030() Specification : DRIVING BAND BLANK AS PER CQA(A) KIRKEE ASSEMBLY DRAWING NO 155-1030 2439A 11002 AND DESIGNER'S REF NO. 155-1060 DC 36792-A DT. 01-11-01 R Estab
2) Driving Band Blank to OFAJ Drg No SM 214 M Description : Driving Band Blank to OFAJ Drg No SM 214 M() Specification : AS PER DRAWING R Estab
3) Second Driving Band Blank to OFAJ Drg No SM 213 K Description : Second Driving Band Blank to OFAJ Drg No SM 213 K() Specification : AS PER OFAJ Drg. No.SM-213 K. R Estab
Category : ddp
Grade : 1
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) COPPER NICKEL TUBE 76point2 MM plus 0 point 5 ID X 7point5MM plus 2 MM THICK TO SPECN BS STA 7 NC 8 AS DRAWN CONDN TEST PIECES OF THE MAT SHOULD BE ANNEALED and CHECKED FOR HARDNESS 50 TO 60 VPN and 180 DEGREE BENT TEST INCLUDING THE OTHERS[07]() Specification : COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECI C Nonestab
Category :
Grade : Grade III
Size : S
4166 Sunflag Iron and Steel Co. Ltd.
33, Mount Road, Sadar, Nagpur, Maharshtra - 440001 Mount Road Nagpur Maharashtra
PIN1 : 440001
Phone No. : 2524661 		AACCS3376C

Download 		1) Metal and Steel Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLOOMS SIZE 300MM X 300 MM RCS OF DIFFERENT LENGTH AND WEIGHT Description : STEEL BLOOMS SIZE 300MM X 300 MM RCS OF DIFFERENT LENGTH AND WEIGHT() Specification : STEEL BLOOMS SIZE 300 MM X 300 MM (RCS) AS PER DETAILS SCOPE OF SUPPLY AND RAILWAY SPECIFICATION NO. IRS-R-16/95 WITH CORRIGENDUM 1 TO 3. R Estab
Category : dp
Grade : 3
Size : L
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Cold Drawn Steel Rod Description : Cold Drawn Steel Rod() Specification : Cold Drawn Steel Rod 40mm dia for tail adapter R Nonestab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Cold Drawn Steel Rod Description : Cold Drawn Steel Rod() Specification : Cold Drawn Steel Rod 40mm dia for tail adapter R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Cold Drawn Steel Rod Description : Cold Drawn Steel Rod() Specification : Cold Drawn Steel Rod 40mm dia for tail adapter R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Cold Drawn Steel Rod Description : Cold Drawn Steel Rod() Specification : Cold Drawn Steel Rod 40mm dia for tail adapter R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Cold Drawn Steel Rod Description : Cold Drawn Steel Rod() Specification : Cold Drawn Steel Rod 40mm dia for tail adapter R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) PARTED STEEL BILLET TO OFAJ DRG. NO. F-498 F & SPECN. AS PER OFAJ SPECN NO. F-466 (LATEST ISSUE) FOR 155 MM M1A4 SHELL Description : PARTED STEEL BILLET TO OFAJ DRG. NO. F-498 F & SPECN. AS PER OFAJ SPECN NO. F-466 (LATEST ISSUE) FOR 155 MM M1A4 SHELL() Specification : PARTED STEEL BILLET TO OFAJ DRG. NO. F-498 F & SPECN. AS PER OFAJ SPECN NO. F-466 (LATEST ISSUE) FOR 155 MM M1A4 SHELL R Estab
2) PARTED BILLET TO OFAJ DRG NO. F-602A FOR 81 MM BOMB BODY FORGING FRONT PART Description : PARTED BILLET TO OFAJ DRG NO. F-602A FOR 81 MM BOMB BODY FORGING FRONT PART() Specification : SPECIFICATION NO. F-329M(LATEST ISSUE) R Estab
3) PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL Description : PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL() Specification : PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL R Estab
Category : ddp
Grade : 1
Size : L
4167 MORAKHIA COPPER AND ALLOYS PVT LTD
3429-3434, G I D C , PHASE-IV, CHHATRAL, DIST.GANDHINAGAR, GUJARAT-382729 CHHATRAL CHHATRAL Gujarat
PIN1 : 382729
Phone No. : 9727708712 		AAACM3439J

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) 0700100007 COPPER ROD 6 POINT 5 MM DIA 0 POINT 09 MM IN Description : 0700100007 COPPER ROD 6 POINT 5 MM DIA 0 POINT 09 MM IN() Specification : BS:2874-1986 R Estab
Category : p
Grade : 3
Size : S
4168 APS BEFRAND INDUSTRIES
PLOT NO.41 AND 42, SUVARNA LAGHU UDYOG YOJNA HINGNA INDUSTRIAL AREA, MIDC, NAGPUR MAHARASHTRA
PIN1 : 440016
Phone No. : 9372430026
GSTIN : 27AYGPS7199J1ZH 		AYGPS7199J

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) EPOXY BASED ZINC DUST PRIMER PAINT TO SPECN NO DGS 175 IN GREY SHADE Description : EPOXY BASED ZINC DUST PRIMER PAINT TO SPECN NO DGS 175 IN GREY SHADE() Specification : EPOXY BASED ZINC DUST PRIMER PAINT TO SPECN. NO.DGS-175,IN GREY SHADE. R Estab
Category : ddp
Grade : 1
Size : S
4169 INDIA METAL PRODUCTS
122/674, SHASTRI NAGAR, KANPUR UTTAR PRADESH
PIN1 : 208005
Phone No. : 0754308013
GSTIN : 09AAPPB4473PIZI 		AAPPB4473P

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) ROLLERS LAUNCHING B B PLAIN CAT NO BB 22 TO DRG NO 5098 METRIC Description : ROLLERS LAUNCHING B B PLAIN CAT NO BB 22 TO DRG NO 5098 METRIC() Specification : ROLLERS, LAUNCHING.B.B.PLAIN CAT.NO.BB-22 TO DRG NO.5098 (METRIC)/A. C Estab
Category : ddp
Grade : 1
Size : S
4170 ARM & HAMMER FORGING PVT. LTD.
PLOT NO.287, SECTOR-58, FARIDABAD HARYANA
PIN1 : 121004
Phone No. : 9810856207 		AAGCA8697L

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) OBLIQUE COUPLING CAT NO 14 5420 000016 TO DRG NO 23719 Description : OBLIQUE COUPLING CAT NO 14 5420 000016 TO DRG NO 23719() Specification : OBLIQUE COUPLING CAT.NO.14/5420-000016 TO DRG NO 23719 R Estab
Category : ddp
Grade : 1
Size : S
4171 ASHOK TIMBER INDUSTRIES
E-22, INDUSTRIAL AREA, YAMUNA NAGAR HARYANA
PIN1 : 135001
Phone No. : 9215615001 		ABJPR8092M

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) BAILEY BRIDGE TIMBERS GRILLAGE CAT NO BB 94 TO DRG NO M 6127 E Description : BAILEY BRIDGE TIMBERS GRILLAGE CAT NO BB 94 TO DRG NO M 6127 E() Specification : BAILEY BRIDGE TIMBERS,GRILLAGE CAT.NO.BB-94 TO DRG NO M-6127/E. R Estab
Category : ddp
Grade : 1
Size : S
4172 MRF LIMITED
114 GREAMS ROAD, CHENNAI TMAILNADU
PIN1 : 600006
Phone No. : +914428292777 		AAACM4154G

Download 		1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) MRF TYRE Description : MRF TYRE() Specification : AS PER REQUIRED/SPECIFICATION C Estab
2) INNER TUBE PNEUMATIC Description : INNER TUBE PNEUMATIC() Specification : AS PER REQUIRED/ SPECIFICATION C Estab
3) TYRE PNEUMATIC Description : TYRE PNEUMATIC() Specification : AS PER REQUIRED/SPECIFICATION C Estab
Category : ddp
Grade : 1
Size : L
4173 ASHISH ENTERPRISES
khasra no.788 Sihani Road Sihani Road Ghaziabad Uttar Pradesh
PIN1 : 201001
Phone No. : 2823085
GSTIN : 09AQYPA3109H1ZH 		AQYPS3109H

Download 		1) Rifle Factory Ishapur
Name Specification Use Status
1) CAP SPRING RETURN (MIM) FOR 0.32[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : SS
1) Rifle Factory Ishapur
Name Specification Use Status
1) PIN HAMMER,TRIGGER,SAFETY SEAR FOR 7.62MM GHAATAK[70]() Specification : PIN HAMMER,TRIGGER,SAFETY SEAR FOR 7.62MM GHAATAK AS PER DRAWING NO. AR/01/34-RFI. C Nonestab
Category :
Grade : Grade III
Size : SS
1) Rifle Factory Ishapur
Name Specification Use Status
1) NUT FORE SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PERDRG. NO. AR/01/23 ALT[70]() Specification : NUT FORE SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PERDRG. NO. AR/01/23 ALT C Nonestab
Category :
Grade : Grade III
Size : SS
1) Rifle Factory Ishapur
Name Specification Use Status
1) LOCK NUT FOR 12 BORE MODIFIED PUMP ACTION GUN[70]() Specification : LOCK NUT FOR 12 BORE MODIFIED PUMP ACTION GUN C Nonestab
Category :
Grade : Grade III
Size : SS
1) Rifle Factory Ishapur
Name Specification Use Status
1) Pin Axis Trigger for 9mm Auto Pistol[7015800394]() Specification : Pin Axis Trigger for 9mm Auto Pistol C Nonestab
Category :
Grade : Grade III
Size : SS
1) Rifle Factory Ishapur
Name Specification Use Status
1) PIN LOCK BUTTON TO DRG.NO.RFI/SK.-7317FOR RIFLE 5.56MM.EXCALIBUR[70]() Specification : AS PER DRAWING C Nonestab
2) PIN HINGE COVER EXR. TO DRG.NO.RFI/SK.-7994FOR RIFLE 5.56MM.EXCALIBUR[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : SS
1) Rifle Factory Ishapur
Name Specification Use Status
1) PIN AXIS LINK FOR PISTOL AUTO 9MM 1A[70]() Specification : AS PER DRAWIING C Nonestab
2) PIN RETAINING NUT FOR PISTOL AUTO 9MM 1A.[70]() Specification : AS PER DRAWING C Nonestab
3) PIN PLUNGER TRIPPING LEVER FOR PISTOL AUTO 9MM 1A[70]() Specification : MATERIAL-STEEL BS: 1429-1980 Gr.070 A 72 C Nonestab
4) PIN AXIS TRIGGER FOR PISTOL AUTO 9MM 1A[70]() Specification : MATERIAL-BS 970 PT I:1991 GR 060A78 OR BS 1429-1980, GR.070 A 72 OR IS:378-1990 DESIG 80 T3 OR 90T3 C Nonestab
Category :
Grade : Grade III
Size : SS
1) Rifle Factory Ishapur
Name Specification Use Status
1) PIN PLUNGER TRIPPING LEVER FOR PISTOL AUTO 9MM 1A[70]() Specification : PIN PLUNGER TRIPPING LEVER FOR PISTOL AUTO 9MM 1A C Nonestab
Category :
Grade : Grade III
Size : SS
1) Rifle Factory Ishapur
Name Specification Use Status
1) PIN AXIS LINK FOR 9MM AUTO PISTOL[70]() Specification : PIN AXIS LINK FOR 9MM AUTO PISTOL C Nonestab
Category :
Grade : Grade III
Size : SS
4174 HOWRAH CHEMICAL WORKS
148 MAHATMA GANDHI ROAD KOLKATA WEST BENGAL
PIN1 : 700007
Phone No. : 9831068490
GSTIN : 19AACFH7515DIZK 		AACFH7515D

Download 		1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ACID HYDROCHORIC FOR PHOSPHATING WORK Description : ACID HYDROCHORIC FOR PHOSPHATING WORK() Specification : AS PER REQUIREMENT C Estab
2) ACID NITRIC Description : ACID NITRIC() Specification : AS PER REQUIREMENT C Estab
3) CHROMIC ACID Description : CHROMIC ACID() Specification : AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ACID HYDROCHORIC FOR PHOSPHATING WORK Description : ACID HYDROCHORIC FOR PHOSPHATING WORK() Specification : AS PER REQUIREMENT C Estab
2) ACID NITRIC Description : ACID NITRIC() Specification : AS PER REQUIREMENT C Estab
3) CHROMIC ACID Description : CHROMIC ACID() Specification : AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CARBON BLACK Description : CARBON BLACK() Specification : CARBON BLACK. SPECN: JSS 6810-81: 2016 (REV No.3) DS CAT No.:- CARBON BLACK TYPE-4 6810-001130 DC No. 5490-ME DT. 24-09-2016 R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) LEAD OXIDE (LITHARGE) Description : LEAD OXIDE (LITHARGE)() Specification : LEAD OXIDE (LITHARGE) REQUIRED FOR MANUFACTURE OF ROCKET PROP.AND SINGLE BASE PROPELLANT AS PER SPECN.JSS-6810-111: 2013 (REV.NO.2). R Estab
2) Litharge (Lead Mono Oxide) Description : Litharge (Lead Mono Oxide)() Specification : LITHARGE (LEAD MONOXIDE) CONFORMING TO THE FOLLOWING SPECN. A) APPEARANCE: YELLOW POWDER B) LEAD MONOXIDE (PbO) CONTENT : MIN. 96%. C) ALKALINE IMPURITIES AS (CaO): 0.002% MAX. D) GRANULATION: MAX.5.0% RETAINED ON 250 MICROMTER I.S.SIEV R Estab
Category : p
Grade : 3
Size : S
4175 LOKENATH ENTERPRISE
MOHANLAL BAHALWALA ROAD BALLY HOWRAH WEST BENGAL
PIN1 : 711201
Phone No. : 9874080774 		ATZPD2223N

Download 		1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) POLYTHENE BAG Description : POLYTHENE BAG() Specification : DIFFERENT SIZE AS PER REQUIREMENT C Estab
2) WOODEN PACKING BOX Description : WOODEN PACKING BOX() Specification :DIFFERENT SIZE AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) POLYTHENE BAG Description : POLYTHENE BAG() Specification : DIFFERENT SIZE AS PER REQUIREMENT C Estab
2) WOODEN PACKING BOX Description : WOODEN PACKING BOX() Specification :DIFFERENT SIZE AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
4176 JAI MATADI REFRIGERATION & ELECTRICAL SERVICES
H.NO.606/2, PLOT NO.5, BODWAD ROAD VARANGAON VARANGAON MAHARASHTRA
PIN1 : 425305
Phone No. : 9226131666 		AHOPB7241D

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) LABOURS FOR BAILING MACHINE Description : LABOURS FOR BAILING MACHINE() Specification : LABOURS FOR BAILING MACHINE P Estab
Category : p
Grade : 3
Size : S
4177 Aroson Plastics Pvt. Ltd.
B-90 Mayapuri Industrial Area Phase-1 Mayapuri Industrial Area Phase-1 New Delhi Delhi
PIN1 : 110064
Phone No. : 28116777
GSTIN : 07AAFCA5152R1Z9 		DELA17678D

Download 		1) Ordnance Factory Dumdum
Name Specification Use Status
1) Moulds for component 10 gm to 3 kgs of weight[62]() Specification : "Design, manufacturing, testing & trial and supply of various type of moulds for Annual requirement quantity: 10 moulds (approx.) and weight of components: 10 gm to 3kgs & materials to be moulded, different types of polymer Granules/powde S Nonestab
Category : p
Grade : Grade III
Size : S
4178 TRELLEBORG INDIA PVT. LTD.
22/9,BERATENA AGRAHARA,HOSUR MAIN ROAD, BENGALURU KARNATAKA
PIN1 : 560100
Phone No. : +918033729368 		AAECT1088L

Download 		1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) O RING (RUBBER) Description : O RING (RUBBER)() Specification : O RING OF DIFFERENT SIZE/AS PER GCF DRAWING/SPECIFICATION C Estab
2) PACKING RING (RUBBER) Description : PACKING RING (RUBBER)() Specification : PACKING RING OF DIFFERENT SIZE/AS PER GCF DRAWING/SPECIFICATION C Estab
3) SEALING RING Description : SEALING RING() Specification : SEALING RING OF DIFFERENT SIZE/AS PER DRG./SPECIFICATION C Estab
Category : dp
Grade : 2
Size : L
4179 Vikrant Forge Pvt Ltd
NH2 Delhi Road, Maitypara, Dankuni Maitypara, Dankuni Hooghly West Bengal
PIN1 : 711224
Phone No. : 26591870
GSTIN : 09AABCS8714R1ZL 		AAACV9222A

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) ROUND 70 MM DIA[01]() Specification : ROUND 70 MM DIA STEEL GRADE 38XC TO GOST 4543/71 R Nonestab
Category : p
Grade : Grade II
Size : M
4180 Strongholds System and Technology Pvt Ltd
SWAPNA NAGRI BLD B1 FLT NO 503 Opp. Annasahen Stadium OPP ANNASAHEB MAGAR STADUIM Maharashtra
PIN1 : 411018
Phone No. : 9960616219
GSTIN : 27ABGCS0892J1ZX 		PNES73274F

Download 		1) Small Arms Factory
Name Specification Use Status
1) Blank of Body Cover Drg No 23055A SKM 902 1[01]() Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902 1, C Nonestab
2) MOUNTING RAIL for JVPC[70]() Specification : MOUNTING RAIL C Nonestab
3) Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA[70]() Specification : Lower Body For CQB 5.56x45 MM for CQB DRG. No. 1901 01 01 11 16 001 00DA. C Nonestab
4) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]() Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA C Nonestab
5) Body Upper for CQB 5 56x45 MM for CQB DRG No 1901 01 01 15 18 001 00DA[70]() Specification : Body Upper for CQB 5 56x45 MM for CQB DRG No 1901 01 01 15 18 001 00DA C Nonestab
6) Receiver Body for 9X19 mm Machine Pistol[70]() Specification : Receiver Body for 9X19 mm Machine Pistol as per Drawing C Nonestab
7) FEED TRAY INTEGRATED FOR LMG BELT FED[70]() Specification : FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED C Nonestab
8) Barrel Mount for 9X19 mm Machine Pistol[70]() Specification : Barrel Mount for 9X19 mm Machine Pistol as per drawing R Nonestab
Category :
Grade : Grade III
Size : S