1) SHEET MS 2500 x 1000 x 1 6 mm IS513 CR DD LF 0121020016
Description : SHEET MS 2500 x 1000 x 1 6 mm IS513 CR DD LF 0121020016()
Specification : C.R. SHEETS TO SPECN: IS-513-2008 (FIFTH REVISION) (REAFFIRMED 2013)-DD ANNEALED AND SKIN PASSED CONDICTION 2500 MM X 1000 MM X 1.6 MM.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036
Description : Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036()
Specification : Steel strip cold rolled closed annealed bright finished 3.56(+0.10/-0.00) mm thick X 80 +/-0.25mm wide in length of 2 mtrs to specn:- IS-513:2008 (Fifth Revision) Grade "DD" Temper 5(Annealed)
R
Nonestab
2) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020
Description : copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020()
Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS)
Specification : MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISHTO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLLSHOULD BE BETWEEN 50 KG TO 100 KG.
C
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 8 5 MM LF 0711906011
Description : BRASS ROD 8 5 MM LF 0711906011()
Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION
Specification : BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025
Description : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025()
Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A)
Specification : CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ALU SHEET 2400X1200X3MM IS737 24345 LF 0615420003[06]()
Specification : ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
R
Nonestab
2) ALU ALLOY ROD 7 MM IS 733 64430 ITEM CODE 0611505008[06]()
Specification : ALUMINIUM ALLOY ROD 7.00(+/-0.05)MM DIA IN STRAIGTH LENGTH OF 2.5 TO 3 METRES TO SPECN.IS:733-1983 DESIGNATION 64430CONDITION "WP" OR IS:733-1983 DESIGNATION 24345 "W" WITHMAXIMUM ALLOWABLE PERIPHERIAL GRAIN GROWTH ON EXTRUDEDSECTION - 5%
C
Nonestab
3) ALU STRIP 55X0 3MM IS 737 19500 LF 0615361047[06]()
Specification : ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.
Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
R
Nonestab
2) BRASS STRIP 25 4X0 63 MM LF 0717560949[07]()
Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1
R
Nonestab
3) COPPER STRIP 15X0 26MM LF 0700661042[07]()
Specification : COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDN
R
Nonestab
4) BRASS STRIP 102 X 3 66 MM BS2871 CZ126 LF 0717560694[07]()
Specification : BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED).
R
Nonestab
5) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020[07]()
Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652
Specification : COPPER STRIP 16+/-0.2 X 0.32+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BSEN 1652:1998,MATL SYMBOL Cu-ETPMATL CONDN R-220.MATERIAL MUST BE HOMOGENEOUS, FREE FROMBURRS, BOWINESS (MAX) 2MM/MTR.COIL WT.8-10KG. ID WITH NYLONRING 300M
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL STRIP 40x0point35 mm LF 0121060051
Description : STEEL STRIP 40x0point35 mm LF 0121060051()
Specification : STEEL STRIP SIZE 40 +/-0.5 MM WIDE X 0.35 +/-0.03 MM THICK TO SPECN:IS-513-2008 (FIFTH REVISION) GR.CR-3 OR GD I CS OFBS-1449-SECTION 1.1:1991 QUALITY IN ANNEALED AND SKIN PASSED CONDITION IN COIL OF 50 KG WEIGHT EACH.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL TAPE BAND 12 point7 X 0 point45MM ITEM CODE 0133060104
Description : STEEL TAPE BAND 12 point7 X 0 point45MM ITEM CODE 0133060104()
Specification : COLD ROLLED STEEL STRIP (STEEL TAPE BANDING) 12.7 MM WIDTH X 0.45MM THICK(26SWG) IN C.R.STEEL STRIPPING SOFT BLUE FINISHHAVE TENSILE STRENGTH 60 TO 80KG/MM SQR WITH SHEAR EDGE IN COIL,OILED WITH SHELL EXISTS 256 WITH WAXED PAPER AND RESI
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6432300008 MS PLATE 3MM TH PHOS ERA
Description : 6432300008 MS PLATE 3MM TH PHOS ERA()
Specification : IS:2062-1994
P
Estab
2) 0145061109 STRIP ST.COLD ROL 0.5MM THX190 MM W
Description : 0145061109 STRIP ST.COLD ROL 0.5MM THX190 MM W()
1) M S PLATE SZ 3 MM PHOSPATED
Description : M S PLATE SZ 3 MM PHOSPATED()
Specification : MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) BRASS STRIPS
Description : BRASS STRIPS()
Specification : BRASS STRIP TO SIZE -18+/-0.2MM(W) x 0.7+/-0.01MM(T) TO BS 2870, CZ-106,1/4 HARD. OXIDIZATION, BEND & DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE [PACKING CONDITION - EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CL
R
Estab
2) COPPER STRIP TO SIZE:13+/-0.2MM(W)* 0.35+0.02MM(T)
Description : COPPER STRIP TO SIZE:13+/-0.2MM(W)* 0.35+0.02MM(T)()
Specification : COPPER STRIP TO SIZE -13+/-0.2MM(W) x 0.35+0.02MM(T) DEEP DRAWING QUALITY TO BS 2870,1970, C-102, CONDITION O. OXIDIZATION, BEND& DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION - EACH ROLL OF STRIP SHOULD BE
R
Estab
Category : p
Grade : 3
Size :
S
3983
CHATTERJI RUBBER MFG CO
129 A J.K. PAUL ROAD J.K PAUL ROAD KOLKATA West Bengal
PIN1 : 700038
Phone No. : 23961908
1) 9077100046 COVER MUZZLE TO DRG NASK
Description : 9077100046 COVER MUZZLE TO DRG NASK()
Specification : 9077100046 COVER MUZZLE TO DRG.NO.NASK 938/10
C
Estab
2) 9077100049 BREECH COVER LR MR TO DRG NO
Description : 9077100049 BREECH COVER LR MR TO DRG NO()
Specification : 9077100049 BREECH COVER LR & MR TO DRG.NO.NASK/939/21 .
C
Estab
Category : p
Grade : 3
Size :
M
1) Cordite Factory Arvankadu
[ENR Registration]
Name
Specification
Use
Status
1) PAPER WRAPPING WAXED KRAFT AMMUNITION
Description : PAPER WRAPPING WAXED KRAFT AMMUNITION()
Specification : JSS 8135-05-2017
(REV. NO.5)
R
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) Protective Ring Drg No. SK-8237
Description : Protective Ring Drg No. SK-8237()
Specification : Protective Ring Drg No. SK-8237
P
Estab
2) PROTECTIVE RING TO DRG. NO. SK-7844/A
Description : PROTECTIVE RING TO DRG. NO. SK-7844/A()
Specification : PROTECTIVE RING TO DRG. NO. SK-7844/A
P
Estab
3) Protective Ring
Description : Protective Ring()
Specification : Drg. No. SK-8944
P
Estab
4) Protective Ring to Drg. No. SK-8943 for Nozzle Front of Stabilizer Assembly of Rocket Pinaka
Description : Protective Ring to Drg. No. SK-8943 for Nozzle Front of Stabilizer Assembly of Rocket Pinaka()
Specification : As per Drg. No. SK-8943
P
Estab
5) NYLON RING TO DRG. NO. ISX- 426
Description : NYLON RING TO DRG. NO. ISX- 426()
Specification : NYLON RING TO DRG. NO. ISX- 426 required for Shell 130mm HE1B
P
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) TRANSIT PLUG TO CQA AMMN DRG NO 155 1065
Description : TRANSIT PLUG TO CQA AMMN DRG NO 155 1065()
Specification : TRANSIT PLUG TO CQA(AMMN)DRG.NO.155-1065,DC 36792-A DT. 01-11-01.
C
Estab
2) THREAD PROTECTOR TO OFAJ DRG NO SM 952
Description : THREAD PROTECTOR TO OFAJ DRG NO SM 952()
Specification : THREAD PROTECTOR TO OFAJ.DRG.NO.SM 952
C
Estab
3) PROTECTOR FOR FIRST COPPER BAND TO OFAJ DRG NO SM 620C
Description : PROTECTOR FOR FIRST COPPER BAND TO OFAJ DRG NO SM 620C()
Specification : as per drawing
C
Estab
4) PROTECTOR FOR 2ND COPPER BAND TO OFAJ DRG NO SM 621C
Description : PROTECTOR FOR 2ND COPPER BAND TO OFAJ DRG NO SM 621C()
Specification : as per drawing
C
Estab
5) PLUG 52 MM FOR SHELL 130 MM HE
Description : PLUG 52 MM FOR SHELL 130 MM HE()
Specification : AS PER DRG
C
Estab
6) COPPER BAND PROTECTOR AS PER DRG NO SM 285 BMATERIAL POLYTHENE HIGH DENSITY TYPE 2
Description : COPPER BAND PROTECTOR AS PER DRG NO SM 285 BMATERIAL POLYTHENE HIGH DENSITY TYPE 2()
Specification : COPPER BAND PROTECTOR AS PER DRG. NO. SM-285 B. MATERIAL POLYTHENE HIGH DENSITY TYPE - 2
C
Estab
7) NYLON RING TO CQA
Description : NYLON RING TO CQA()
Specification : AS PER DRG
C
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) O RING TO OFAJ DRG NO FS 519 D
Description : O RING TO OFAJ DRG NO FS 519 D()
Specification : 'O' RING TO OFAJ DRG. NO.FS-519 D
C
Estab
Category : ddp
Grade : 1
Size :
S
3984
MECON (INDIA)
1/1GANGULY LANE
3rd FLOOR 1/1 GANGULY LANE KOLKATA West Bengal
PIN1 : 700007
Phone No. : 8910998907 GSTIN : 19ACHPC6036B1Z1
Specification : STEEL STRIP 200+/-0.5 MM WIDE X 1.1+/-0.05 MM THICK TO SPECN IS-513-TYPE DD OR BS-1449 PT-I GR-3,CS OR CR
R
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025
Description : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025()
Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A)
R
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS STRIP 22X1 02 MM LF 0710664345
Description : BRASS STRIP 22X1 02 MM LF 0710664345()
Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
R
Nonestab
Category : p
Grade : 3
Size :
L
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1737000812 SCREW MS CSK HD[17]()
Specification : SCREW WOOD M.S.CSK HEAD IS:451-1972 (R.A - 1996)SIZE - NO. 8 X 30 MM LONG. ( 1 1/4" X 8 GAUGE )
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
[Deemed Registration]
Name
Specification
Use
Status
1) BRASS ROUND 38 POINT 1 PLUS 0POINT25 MM DIA TO SPECN BS 2874 CZ 121 PB3 M IN THE LENGTH OF2 MTRS MINIMUM LONG BAR LATEST ISSUE
Description : BRASS ROUND 38 POINT 1 PLUS 0POINT25 MM DIA TO SPECN BS 2874 CZ 121 PB3 M IN THE LENGTH OF2 MTRS MINIMUM LONG BAR LATEST ISSUE()
Specification : BRASS ROUND 38.1 +0.25mm DIA TO SPECN BS-2874-CZ-121 PB3-"M" IN THE LENGTH OF2 MTRS (MINIMUM) LONG BAR. LATEST ISSUE
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) ELECTROLYTE TIN PLATE
Description : ELECTROLYTE TIN PLATE()
Specification : BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION[07]()
Specification : COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERT
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) DRIVING BAND BLANK AS PER CQA DRG NO 155 1030
Description : DRIVING BAND BLANK AS PER CQA DRG NO 155 1030()
Specification : DRIVING BAND BLANK AS PER CQA(A) KIRKEE ASSEMBLY DRAWING NO 155-1030 2439A 11002 AND DESIGNER'S REF NO. 155-1060 DC 36792-A DT. 01-11-01
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) DRIVING BAND BLANK AS PER CQA DRG NO 155 1030
Description : DRIVING BAND BLANK AS PER CQA DRG NO 155 1030()
Specification : DRIVING BAND BLANK AS PER CQA(A) KIRKEE ASSEMBLY DRAWING NO 155-1030 2439A 11002 AND DESIGNER'S REF NO. 155-1060 DC 36792-A DT. 01-11-01
R
Estab
2) Driving Band Blank to OFAJ Drg No SM 214 M
Description : Driving Band Blank to OFAJ Drg No SM 214 M()
Specification : AS PER DRAWING
R
Estab
3) Second Driving Band Blank to OFAJ Drg No SM 213 K
Description : Second Driving Band Blank to OFAJ Drg No SM 213 K()
Specification : AS PER OFAJ Drg. No.SM-213 K.
R
Estab
Category : ddp
Grade : 1
Size :
L
1) Gun and Shell Factory
Name
Specification
Use
Status
1) COPPER NICKEL TUBE 76point2 MM plus 0 point 5 ID X 7point5MM plus 2 MM THICK TO SPECN BS STA 7 NC 8 AS DRAWN CONDN TEST PIECES OF THE MAT SHOULD BE ANNEALED and CHECKED FOR HARDNESS 50 TO 60 VPN and 180 DEGREE BENT TEST INCLUDING THE OTHERS[07]()
Specification : COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECI
C
Nonestab
Category :
Grade : Grade III
Size :
S
3986
Sunflag Iron and Steel Co. Ltd.
33, Mount Road, Sadar, Nagpur, Maharshtra - 440001 Mount Road Nagpur Maharashtra
PIN1 : 440001
Phone No. : 2524661
1) STEEL BLOOMS SIZE 300MM X 300 MM RCS OF DIFFERENT LENGTH AND WEIGHT
Description : STEEL BLOOMS SIZE 300MM X 300 MM RCS OF DIFFERENT LENGTH AND WEIGHT()
Specification : STEEL BLOOMS SIZE 300 MM X 300 MM (RCS) AS PER DETAILS SCOPE OF SUPPLY AND RAILWAY SPECIFICATION NO. IRS-R-16/95 WITH CORRIGENDUM 1 TO 3.
Specification : Cold Drawn Steel Rod 40mm dia for tail adapter
R
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) PARTED STEEL BILLET TO OFAJ DRG. NO. F-498 F & SPECN. AS PER OFAJ SPECN NO. F-466 (LATEST ISSUE) FOR 155 MM M1A4 SHELL
Description : PARTED STEEL BILLET TO OFAJ DRG. NO. F-498 F & SPECN. AS PER OFAJ SPECN NO. F-466 (LATEST ISSUE) FOR 155 MM M1A4 SHELL()
Specification : PARTED STEEL BILLET TO OFAJ DRG. NO. F-498 F & SPECN. AS PER OFAJ SPECN NO. F-466 (LATEST ISSUE) FOR 155 MM M1A4 SHELL
R
Estab
2) PARTED BILLET TO OFAJ DRG NO. F-602A FOR 81 MM BOMB BODY FORGING FRONT PART
Description : PARTED BILLET TO OFAJ DRG NO. F-602A FOR 81 MM BOMB BODY FORGING FRONT PART()
3) PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL
Description : PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL()
Specification : PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL
R
Estab
Category : ddp
Grade : 1
Size :
L
1) Ordnance Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) COLD DRAWN STEEL ROD 40MM DIA
Description : COLD DRAWN STEEL ROD 40MM DIA()
Specification : COLD DRAWN STEEL ROD 40 (-0.10) MM DIA TO SPECN. BS: 970 PT 3 1991 GRADE 080M40, 3 TO 4 METRE LONG ( FOR MANUFACTURING OF TAIL ADAPTER ITV-47)
R
Estab
Category : p
Grade : 2
Size :
S
3987
SOUTHWEST ALUMINIUM (GROUP) CO. LTD.
XIPENG TOWN JIULONGPO DISTRICT CHONGQING CHINA
PIN1 : 401326
Phone No. : 0086236580888
1) ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 1 SPECN EXTRUDED HOLLOW PROFILE INTHE LENGTH OF 4850 20MM FOR MG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A
Description : ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 1 SPECN EXTRUDED HOLLOW PROFILE INTHE LENGTH OF 4850 20MM FOR MG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A()
Specification : ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE INTHE LENGTH OF 4850 +20MM FOR MG AS PER DRG.NO.IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A'".
R
Nonestab
2) ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 BY 1 SPECN EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 PLUS 20MM FOR RG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A 6076451584
Description : ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 BY 1 SPECN EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 PLUS 20MM FOR RG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A 6076451584()
Specification : ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 +20MM FOR RG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A'
1) UNIT LOAD FOR CH 8 AND 9
Description : UNIT LOAD FOR CH 8 AND 9()
Specification : UNIT LOAD FOR 155 MM CHARGE 8 & 9 TO BOFORS DRG.No.4085565 AND 4085566 AND AS PER CFA DRG.No.13 S 002 INCORPORATING THE SUGGESTIONS OF CQA(A), KADKI, VIDE THEIR LETTER No.QA 17553/GEN/VIII DATED 30/03/1995.
1) ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 1 SPECN EXTRUDED HOLLOW PROFILE INTHE LENGTH OF 4850 20MM FOR MG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A
Description : ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 1 SPECN EXTRUDED HOLLOW PROFILE INTHE LENGTH OF 4850 20MM FOR MG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A()
Specification : ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE INTHE LENGTH OF 4850 +20MM FOR MG AS PER DRG.NO.IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A'".
R
Nonestab
Category : ddp
Grade : 1
Size :
L
1) Ordnance Factory Ambajhari
[Deemed Registration]
Name
Specification
Use
Status
1) ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 BY 1 SPECN EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 PLUS 20MM FOR RG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A 6076451584
Description : ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 BY 1 SPECN EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 PLUS 20MM FOR RG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A 6076451584()
Specification : ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 +20MM FOR RG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A'
1) SHOCK STRUT KHAKI OF DRG NO ADRDE 1426 A FOR AN 32 PLATFORM 6245001426
Description : SHOCK STRUT KHAKI OF DRG NO ADRDE 1426 A FOR AN 32 PLATFORM 6245001426()
Specification : SHOCK STRUT KHAKI OF DRG NO ADRDE-1426-A FOR AN-32 PLATFORM
C
Estab
Category : ddp
Grade : 1
Size :
S
3997
INDIA METAL PRODUCTS
122/674, SHASTRI NAGAR, KANPUR UTTAR PRADESH
PIN1 : 208005
Phone No. : 0754308013 GSTIN : 09AAPPB4473PIZI
1) EPOXY BASED ZINC DUST PRIMER PAINT TO SPECN NO DGS 175 IN GREY SHADE
Description : EPOXY BASED ZINC DUST PRIMER PAINT TO SPECN NO DGS 175 IN GREY SHADE()
Specification : EPOXY BASED ZINC DUST PRIMER PAINT TO SPECN. NO.DGS-175,IN GREY SHADE.
