1) GUARD HAND ASSY BLACK
Description : GUARD HAND ASSY BLACK()
Specification : GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO.26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6220822317 CONTAINER WITH DISC TO DRG PT NO ITV 21 DC 36747 A
Description : 6220822317 CONTAINER WITH DISC TO DRG PT NO ITV 21 DC 36747 A()
Specification : CONTAINER WITH DISC TO DRG.PT.NO.ITV 21 DC 36747-A SPECN. NO. CQA(A) 2303(F) DC 36747-A FOR BOMB 120 MM MORTAR.MATERIAL:-NYLON REINFORCED (BACKED) CELLULOID SHEET. COLOURED RATIO:--RED: LIGHT BLUE:: 4 : 3. PACKING AS PER DRAWING NUM
R
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) POLYTHENE BAG
Description : POLYTHENE BAG FOR 84MM C.G CC()
Specification : JSS :9330-03:2014 REV. NO.3
E
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG. CASE
Description : POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG. CASE()
Specification : POLYTHENE PROTECTIVE BAG AS PER MATL. LDPE GRADE TYPE 1 TO SPECN JSS 9330-03:2007 REV NO.2 FOR 84MM CG CC OF SIZE LENGTH 440-450 MM, DIA 110, LAY FLAT 173(+10,-0), THICKNESS 0.26-0.06 AS PER DRG. NO. CG84/SK/11003/C DT 14/11/2010 AMENDED
E
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Equipment Factory Hazaratpur
[ENR Registration]
Name
Specification
Use
Status
1) Description : SELF SEALING POLYTHENE BAG OF DIFFERENT DIMENSIONS()
Specification : STEEL STRIP 200+/-0.5 MM WIDE X 1.1+/-0.05 MM THICK TO SPECN IS-513-TYPE DD OR BS-1449 PT-I GR-3,CS OR CR
R
Nonestab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) ARALDITE TWO TUBE PACK 180GRAM EACH LF 1003022200
Description : ARALDITE TWO TUBE PACK 180GRAM EACH LF 1003022200()
Specification : ARALDITE IN TWO TUBE PACK (180 GRMS IN EACH PACK)
R
Nonestab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) CUPRO NI STRIP BS EN 1652 LF 0700169101
Description : CUPRO NI STRIP BS EN 1652 LF 0700169101()
Specification : CUPRO NICKEL STRIP SIZE 26+/-0.50 MM WIDE x 0.50[+0.02/-0.03 MM] THICK IN COILS. TO SPECN:- BS EN 1652:1998 DESIGN Cu Ni 25 WITH % Bi RESTRICTED TO 0.002%,MATERIAL CONDITION R-290 OR BS EN 1652:1998 DESIGN Cu Ni 10 Fe 1 Mn. MATERIAL CONDI
R
Nonestab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) CUPRO NI STRIP BS EN 1652 LF 0700169101
Description : CUPRO NI STRIP BS EN 1652 LF 0700169101()
Specification : CUPRO NICKEL STRIP SIZE 26+/-0.50 MM WIDE x 0.50[+0.02/-0.03 MM] THICK IN COILS. TO SPECN:- BS EN 1652:1998 DESIGN Cu Ni 25 WITH % Bi RESTRICTED TO 0.002%,MATERIAL CONDITION R-290 OR BS EN 1652:1998 DESIGN Cu Ni 10 Fe 1 Mn. MATERIAL CONDI
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Nonestab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS STRIP 25 4X0 63 MM LF 0717560949
Description : BRASS STRIP 25 4X0 63 MM LF 0717560949()
Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1
R
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) TIN POWDER MZ 6605 1001771519
Description : TIN POWDER MZ 6605 1001771519()
Specification : TIN POWDER TO SPECN NO.MZ 66005. DT. 21/04/2007.
R
Nonestab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) TAPE ADHESIVE W P FABRIC 50MM WIDE LF 2101773048
Description : TAPE ADHESIVE W P FABRIC 50MM WIDE LF 2101773048()
Specification : TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14.
R
Nonestab
Category : s
Grade : 3
Size :
S
1Cordite Factory Arvankadu
[ENR Registration]
Name
Specification
Use
Status
1) PAPER WRAPPING WAXED KRAFT AMMUNITION
Description : PAPER WRAPPING WAXED KRAFT AMMUNITION()
Specification : JSS 8135-05-2017 (REVISION No. 5)
R
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Equipment Factory Hazaratpur
[ENR Registration]
Name
Specification
Use
Status
1) Description : SELF ADHESIVE POLY BAG (50 X 35) CM()
1) paint ready mixed air drying matt finish for general purpose olive green item code 1011509314
Description : paint ready mixed air drying matt finish for general purpose olive green item code 1011509314()
Specification : ISC-220 OF IS-5-2007 (6TH REV) TO SPECN IS-168-1993 (THIRD REV) (REAFFIRMED 2002) DC NO. 36851030- ME DT19-03-2001 AS APPLICABLE FOR DEFENCE USE)
Specification : PAINT READY MIXED AMMN. AIR DRYING BRUSHING SEMI-GLOSSY FOR GENERAL PURPOSE TURQUIOISE BLUE ISC NO.-102 OF IS-5-2007(6TH REV) TO SPECN 1S-168-1993(REAFFIRMED 2002)(3RD REV) DC NO. DC NO.3685-ME DT 19/3/01 AS APPLICABLE FOR DEFENCE USE.
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
Specification : AS PER SPECIFICATION
C
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
1) METALLIC CONTAINER FOR CH 8 AND 9
Description : METALLIC CONTAINER FOR CH 8 AND 9()
Specification : METALLIC CONTAINERS FOR CHARGES 8 & 9 OF 155 MM AMMN SPECIFICATION CQA(AMMN) KIRKEE. DRG.NO.4085561 DC-35637-A DT.17.12.93 LEAK TEST AS PER SPECN.IA 1169 (N) DC 35707-A DT 05.05.94
Specification : BOX STEEL NO.412 S/4 (GENERAL ARRANGEMENT) DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5. (REQUIRED FOR PACKING OF 68 MM ROCKET HE/PRACTICE)
C
Estab
12) 6572900000 CARRIER 6A L STEEL DRG NO ISV 354A
Description : 6572900000 CARRIER 6A L STEEL DRG NO ISV 354A()
Specification : CARRIER 6A/L STEEL COMPLETE WITH ALL FITMENTS DRAWING NO.ISV354-A DC-37214-A,SPECN. NO. IA-1169(N) DC 35576-A, SHOULD BEPAINTED WITH READY MXD PAINT AIR DRYING MATT FINISH SPRAYINGFOR GENERAL PURPOSE "OLIVE GREEN R.M.A.R. MATT FINISH GP T
C
Estab
13) 6576773398 AMN CONTAINER BOX C 53A ISV 574 A
Description : 6576773398 AMN CONTAINER BOX C 53A ISV 574 A()
Specification : AMMUNITION CONTAINER BOX C 53-A (STEEL) FOR PACKING OF 130MMAMMUNITION TO DRG. PART NUMBER ISV 574-A DC NUMBER 37047-A DATED 20/03/2006.
C
Estab
Category : p
Grade : 3
Size :
S
3846
CREATIVE POLY PACKS PRIVATE LIMITED
7 POLLOCK STREET 3RD FLOOR SUITE NO. 12 KOLKATA WEST BENGAL
PIN1 : 700001
Phone No. : 033-22216415 GSTIN :
19AACCC3222D1Z7
Specification : CALCIUM CARBONATE FOR EXPLOSIVES TYPE II PRECIPITATED MATERIAL RETAINED ON 90 MICRON IS SIEVE - NIL (PERCENT BY MASS) FOR USE IN PROPELLANTS SPECN: IS 7633 - 1982 REAFFIRMED 2016. (FIRST REVISION) AMENDMENT NO. 1 DC 5372-ME DT.28-07-2015
R
Estab
Category : p
Grade : 3
Size :
M
3848
HINDUSTAN METAL
315, MAKER BHAVAN - 3, NEW MARINE LINES, MUMBAI MAHARASHTRA
PIN1 : 400020
Phone No. : 022-22019829
1) METALLIC CONTAINER FOR CH 8 AND 9
Description : METALLIC CONTAINER FOR CH 8 AND 9()
Specification : METALLIC CONTAINERS FOR CHARGES 8 & 9 OF 155 MM AMMN SPECIFICATION CQA(AMMN) KIRKEE. DRG.NO.4085561 DC-35637-A DT.17.12.93 LEAK TEST AS PER SPECN.IA 1169 (N) DC 35707-A DT 05.05.94
R
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Itarsi
[ENR Registration]
Name
Specification
Use
Status
1) Package 155 MM
Description : Package 155 MM()
Specification : O DRGNO 4085561 WITH D.C.NO 35637-A TO ALL COMPONENTS AND CONNEC-TED DRAWINGS.
R
Estab
Category : ddp
Grade : 1
Size :
S
3849
S K PROFILE INDUSTRIES
PLOT NO:114 H.NO 5-5-35/14 PRASHANTI NAGAR IDA,KUKATPALLY HYDERABAD TELANGANA
PIN1 : 500072
Phone No. : 09885723204
1) UNIT LOAD FOR CH 8 AND 9
Description : UNIT LOAD FOR CH 8 AND 9()
Specification : UNIT LOAD FOR 155 MM CHARGE 8 & 9 TO BOFORS DRG.No.4085565 AND 085566 AND AS PER CFA DRG.No.13 S 002 INCORPORATING THE SUGGESTIONS OF CQA(A), KADKI, VIDE THEIR LETTER No.QA 17553/GEN/VIII DATED 30/03/1995.
Specification : PLY WOOD FOR GENERAL PURPOSE,GRADE MR TYPE BB SIZE 120 cm X120 cm X 3 mm THICK, 3 PLY, SPECN IS:303-1989 (3RD REVISION) WITH AMENDMENT NO.1 , 2,3,4,5, & 6.
R
Estab
13) PLYWOOD 120X120CMX6MM THICK 5PLY()
Specification : IS:303-1989
R
Estab
14) BOX CARTRIDGE PEK 1 TA L()
Specification : SPECN. NO. IA 948 (ak) DC 36868-A
R
Estab
15) AMMN.CONT.BOX H-76 MK1 DRGNO 1A 914()
Specification : IA 948
R
Estab
16) BOX M 20 A L DRG CIA AMMN 135()
Specification : SPECN IA 948 (a,k)
R
Estab
17) TIMBER MANGO 150X19MMX1.219 MTR UP()
Specification : SPECN. IND/ME/883 (f)(PROV) DC 3754-ME
1) METALLIC CONTAINER FOR CH 8 AND 9
Description : METALLIC CONTAINER FOR CH 8 AND 9()
Specification : METALLIC CONTAINERS FOR CHARGES 8 & 9 OF 155 MM AMMN SPECIFICATION CQA(AMMN) KIRKEE. DRG.NO.4085561 DC-35637-A DT.17.12.93 LEAK TEST AS PER SPECN.IA 1169 (N) DC 35707-A DT 05.05.94
Specification : DIETHYLPHTHALATE (SPECN : IND/ME/873(A): 2015 DC 5384-ME, DT.21.12.2015 ADDL.CLAUSE: COMPATIBILITY WITH NG, WHEN MIXED WITH NG THE DEP MUST NOT LOWER THE ABEL HEAT TEST OF NG.
R
Estab
2) DI N BUTYL PHTHALATE DBP
Description : DI N BUTYL PHTHALATE DBP()
1) 6333501000 CASING ASSLY FOR MODULAR CHARGE 350[63]()
Specification : CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) GUARD HAND ASSY.(DARK BLUE GRAY) FOR RIFLE 5.56MM INSAS[70]()
Specification : GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA) 2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) & 4) 5305-077989 (WITH S.S.REFLECTOR). ARDE SPECN.ARDE/SPECN/538
C
Nonestab
2) CATCH COCKING HANDLE (MOULDING) FOR RIFLE 5.56MM INSAS[70]()
3) STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUN[70]()
Specification : STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUNTO RFI DRG.NO. PAG-0070.[MAT.- NYLON-66 TO SPECN.DEF,STD 93-8/1][COLOUR- BLACK & LIGHT MATT FINISH]
C
Nonestab
4) GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY) WITH COLOUR CODE 695 FOR RIFLE 5.56MM INSAS[70]()
Specification : GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY) WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TO ARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)
C
Nonestab
5) BUTT (PLASTIC) (DARK BLUE) FOR RIFLE 5.56MM INSAS.[70]()
Specification : BUTT(PLASTIC),(D/BLUE) TO DS CAT NO.1005-560838(DC-26635-S) SPECN.NO.ARDE/SPECN/536(PROV). FOR RIFLE 5.56MM INSAS.
C
Nonestab
6) GUARD HAND ASSY. (UPPER) (STEEL STRIP) FOR RIFLE 5.56MM INSAS.[70]()
Specification : GUARD HAND ASSY.(UPPER)(STEEL STRIP)[FOR DARK BLUE GRAY COL.TO DS CAT NO.1005-560046 (DC-26533-SA). CONSISTING OF:- 1)1005-560047(DC-25638-SA) 2)1005-560832(DC-26635-SA) & 3)5320-022259(DC-26504-SA),(2-NOS.) FOR RIFLE 5.56MM INSAS.
C
Nonestab
7) HANDLE CARRYING ASSY.(MOULDING) (DARK BLUE) FOR RIFLE 5.56MM INSAS.[70]()
Specification : HANDLE CARRYING ASSY.(MOULDING)(DARK BLUE) TO DS CAT. NO. 1005-560850(DC-26635-SA).CONSIST OF:1005-007829(DC-23971-SA)(ALONG WITH LEVER REVETING ASSY. TO DS CAT NO.1005-007818 (DC 23982-SA). CONSIST OF: 1005-007816 & 5315-009330. SPECN.NO.
Specification : SOAP SOFT IN THE FORM OF FLAKES TO DGQA SPCN IND/SL/3021 (C) PACKED IN WATER PROOF BAGS OF 20 KG CAPACITY, FOR LUBRICATION IN DEEP DRAW PROCESS OF VARIOUS TYPES OF CARTG.CASES & CUPS.
