List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4021 NITYANAND UDYOG PVT. LTD.
6-A, M.I.D.C. INDUSTRIAL AREA, HINGNA ROAD, NAGPUR, MAHARASHTRA
PIN1 : 440016
Phone No. : 07104-237425
GSTIN : 27AAACN7201R1Z5 		AAACN7201R

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) TWIN CONTAINER 520.9 FOR HEAT-551() DRG.NO. TRD-422155 C NOT ESTABLISHED
2) CARRIER, AMMUNITION 12-A (PLASTIC)() DRG.PT.NO. ISV-470-A DC-36999-A DT. 2/2/05 WITH SHOCK ABSORBER ASSEMBLY B DRG. PT.NO. ISV-147-SA DC-35855-A DT. 23/11/94 CQA(A)-2804(m) DC-36202-A DT. 7/11/96 C Non Established
3) SET OF FOLLOWING 6 COMPONENTS FOR ARMING DEVICE FOR 84MM 551 (1) HOUSING (2) CONTACT SLEEVE (3) CONT() DRG.NO. (1) HOUSING TRD-2-2-2217 (2) CONTACT SLEEVE TRD-1-2-2192 (3) CONTACT PIECE RETAINER 1-2-2194 (4) CONTACT SLEEVE INSULATOR TRD-1-2-2199 (5) PROJECTIVE COVER TRD-2-2-2197 (6) INSULATOR TRD-2-2-2202 C Non Established
4) UNIT LOAD ULS 106.24 CONTAINER 9710 ON PALLET() DRG.NO. KHPK-210058 C Non Established
Category : P
Grade : III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SLIDING RING TO DRG.NO.TRD-1-2-2264 (9911357851)() DRG.NO. TRD-1-2-2264 C NOT ESTABLISHED
Category : P
Grade : III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6220822317 CONTAINER WITH DISC TO DRG PT NO ITV 21 DC 36747 A Description : 6220822317 CONTAINER WITH DISC TO DRG PT NO ITV 21 DC 36747 A() Specification : CONTAINER WITH DISC TO DRG.PT.NO.ITV 21 DC 36747-A SPECN. NO. CQA(A) 2303(F) DC 36747-A FOR BOMB 120 MM MORTAR.MATERIAL:-NYLON REINFORCED (BACKED) CELLULOID SHEET. COLOURED RATIO:--RED: LIGHT BLUE:: 4 : 3. PACKING AS PER DRAWING NUM R Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BUTT PLASTIC FOR AKC 14[70]() Specification : BUTT PLASTIC TO DRG NO.AKC-14 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5 56 IN FINISHED CONDITION[70]() Specification : GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5.56 IN FINISHED CONDITION. C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MAGAZINE PLASTIC FOR AMOGH 5 56MM IN FINISHED CONDITION[70]() Specification : MAGAZINE PLASTIC, 30 RDS TO DRG NO. AKC-18*2 FOR AMOGH 5.56MM IN FINISHED CONDITION C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Grip Handle Right[70]() Specification : GRIP HANDLE (RIGHT) AS PER DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126 C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Grip Handle Left and Right For FIRING DEVICE[70]() Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125 C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MUZZLE CAP MOULDING FOR JVPC[70]() Specification : MUZZLE CAP MOULDING DRG. NO. 0204 04 04 00 00 001 00DA C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BUTT PLASTIC FOR AKC 14[70]() Specification : BUTT PLASTIC TO DRG NO.AKC-14 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Packing Box for Revolver 0 32 Side Swing DRG No SK 6263 R SW[25]() Specification : Packing Box for Revolver 0.32 Side Swing DRG No.SK-6263 R/SW. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA[7012670010]() Specification : Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA C Estab
2) Hand Guard for LMG 7 62 51mm Belt Fed as per drawing no1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA[70]() Specification : Hand Guard for LMG 7.62X51mm Belt Fed as per drawing no. 1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA. C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MUZZLE CAP MOULDING[70]() Specification : MUZZLE CAP MOULDING DRG. NO. 0204 04 04 00 00 000 00AA C Nonestab
2) Hand Guard for LMG 7 62 51mm Belt Fed as per drawing no1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA[70]() Specification : Hand Guard for LMG 7.62X51mm Belt Fed as per drawing no. 1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA. C Nonestab
3) HAND GUARD RIGHT and LEFT FOR LMG BELT FED[70]() Specification : HAND GUARD RIGHT & LEFT AS PER DRG.NO. 1804 01 00 00 00 001 00DA & 1804 01 00 00 00 002 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Packing Box for Revolver 0 32 Side Swing DRG No SK 6263 R SW[25]() Specification : Packing Box for Revolver 0.32 Side Swing DRG No.SK-6263 R/SW. C Nonestab
2) Connector lower body for CQB 5 56[70]() Specification : Connector lower body for CQB 5.56x45 mm DRG. No. 1901 01 02 00 00 007 00DC. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) BALLISTIC CAP TO OFAJ DRG NO FS 2771C Description : BALLISTIC CAP TO OFAJ DRG NO FS 2771C() Specification : BALLISTIC CAP TO OFAJ DRG NO FS 2771C C Estab
Category : dp
Grade : 3
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) 6573020501 AMMUNITION CONTAINER NO 6717 AS PER DRAWING NO AFK DEV 239 SHEET NO 1 2 AND3[65]() Specification : AS PER DRAWING NO AFK DEV 239 SHEET NO 1 2 AND3 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330600190 RING SEALING DRG.3-016919 DET-52[63]() Specification : SPECN.JSS 4720-02 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6576763204 CONTAINER 67A (PLASTIC)W/O DISC[65]() Specification : SPECN.CQA(A) 2804(M) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331451000 SHAPED CHARGE 145 MM EMPTY[63]() Specification : QAP NO. HEMRL/HE/ ADD/08/01 REV.00 OF 09/2008. C Nonestab
2) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB[62]() Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6419000014 PLUG TO DRG.NO ISX-393 FOR 125MM HE[64]() Specification : PLUG (PLASTIC) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Guard Hand Left Right Assembly Polymers[11]() Specification : Guard Hand Left Right Assembly Polymers E Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) 2103142046 DISC LDPE 6 4 MM THICK[21]() Specification : DISC LDPE 6.4 MM THICK C Nonestab
2) 6595050014 ANTI ST PLASTIC BOX FOR CTG 380[65]() Specification : ANTI ST. PLASTIC BOX FOR CTG. .380" R Nonestab
3) 6595050015 PLASTIC BOX FOR PKG OF CARTG 30 06[65]() Specification : PLASTIC BOX FOR PKG. OF CARTG 30-06 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SUPPORT FOR CONTAINER 125 MM FSAPDS (IMI)() DRG.NO. TRD-121959 C NOT ESTABLISHED
Category : P
Grade : II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) COVER GUN MUZZLE FOR TAR AS PER DRG NO TAR K 9029 STAR[70]() Specification : COVER GUN MUZZLE FOR TAR AS PER DRG NO. TAR K 9029 STAR C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) OILER ASSEMBLY SK 6641 TE[70]() Specification : OILER ASSEMBLY SK- 6641/TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Lifting Plug to Drg No.5191856 with Rubber Gasket to Drg No. 6391043 Description : Lifting Plug to Drg No.5191856 with Rubber Gasket to Drg No. 6391043() Specification : Lifting Plug to Drg No.5191856 with Rubber Gasket to Drg No. 6391043 E Estab
2) PLUG TO DRG NO ISX 393 Description : PLUG TO DRG NO ISX 393() Specification : PLUG TO DRG. NO. ISX- 393 FOR 125MM HE SHELL WITH DC NO. 35484-A DATED 31/03/1993 E Estab
3) PLUG 52MM TO DRG NO ISX 377 Description : PLUG 52MM TO DRG NO ISX 377() Specification : PLUG 52MM TO DRG NO ISX 377 E Estab
Category : s
Grade : 2
Size : O
1) Gun and Shell Factory
Name Specification Use Status
1) PACKING WASHER TO DET NO 073 OF DRG NO 4 025998 AS PER DRG NO M 11651[62]() Specification : PACKING WASHER TO DET NO.(073) OF DRG. NO. 4-025998 AS PER DRG. NO. M-11651 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MFG and supply of handle carrying assembly POLYMER AS PER THE DRAWING NO 27P 6300 FOR RIFLE 7 62MM[70]() Specification : MFG and supply of handle carrying assembly POLYMER AS PER THE DRAWING NO 27P 6300 FOR RIFLE 7 62MM E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 2101110400 CLOTH ALL WOOL MELTON FINISH Description : 2101110400 CLOTH ALL WOOL MELTON FINISH() Specification : JSS 8305- 16: 2009 R Estab
2) 2103218064 EXPANDED POLY FOAM 1000X 500X 20MM Description : 2103218064 EXPANDED POLY FOAM 1000X 500X 20MM() Specification : IS: 4671- 1984 R Estab
3) 2103218067 EXPANDED POLY FOAM 1000X 500X 6MM Description : 2103218067 EXPANDED POLY FOAM 1000X 500X 6MM() Specification : IS:4671 - 1984. R Estab
4) 2103218068 EXPANDED POLY FOAM 1000X 500X 10MM Description : 2103218068 EXPANDED POLY FOAM 1000X 500X 10MM() Specification : IS: 4671 - 1984 (FIRST REVISION) R.A-1999 SIZE: 1000 MM X 500 MM X 10 MM THICK. R Estab
5) 2103782301 COMMERCL.BLACK POLYTN.0.2TO0.3MM TH Description : 2103782301 COMMERCL.BLACK POLYTN.0.2TO0.3MM TH() Specification : SPECN.NO. JSS 9330-03 R Estab
6) 2512925322 BAG POLYTHENE SZ-1170 X 303 X 0.5MM Description : 2512925322 BAG POLYTHENE SZ-1170 X 303 X 0.5MM() Specification : SPECN. NO. JSS 9330- 03 C Estab
7) 6044000103 HALF CUP 120MM DRG ISV 1740 PLASTIC Description : 6044000103 HALF CUP 120MM DRG ISV 1740 PLASTIC() Specification : JSS 9330-01. C Estab
8) 6141600000 MINE APERS M 14 EMPTY WITH FZ INTGL Description : 6141600000 MINE APERS M 14 EMPTY WITH FZ INTGL() Specification : CQA (A) 1837 C Estab
9) 6143010220 HALF CUP B 81MM DRG ISV 862 PLASTIC Description : 6143010220 HALF CUP B 81MM DRG ISV 862 PLASTIC() Specification : HALF CUP'B'(PLASTIC) TO DRG.PART NO.ISV-862 DC-36693-A C Estab
10) 6273200026 OBTURATOR TO DRG NO CQA 155 1140 Description : 6273200026 OBTURATOR TO DRG NO CQA 155 1140() Specification : OBTURATOR TO CQA DESIGN.REF.155-1140, DC 37025-A DT.08/08/05 FOR THE ASSLY OF SHELL 155 MM HE ERFB M1A4 (BT)/(BB). C Estab
11) 6330600190 RING SEALING DRG.3-016919 DET-52 Description : 6330600190 RING SEALING DRG.3-016919 DET-52() Specification : SPECN.JSS 4720-02 C Estab
12) 6410900220 LENS PART DRG. 065/4 FOR 125MM HEAT Description : 6410900220 LENS PART DRG. 065/4 FOR 125MM HEAT() Specification : SPECN. NO. JSS 9330-05 C Estab
13) 6490501002 PLUG FUZE HOLE 50.8MM 2A (PLASTIC) Description : 6490501002 PLUG FUZE HOLE 50.8MM 2A (PLASTIC)() Specification : PLUG FUZE HOLE 50.8 MM 2A (PLASTIC) C Estab
14) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A Description : 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A() Specification : SPECN.NO. CQA(A) 2804 C Estab
15) 6571523799 WASHER POLY ISV 1465 FOR CON 63A Description : 6571523799 WASHER POLY ISV 1465 FOR CON 63A() Specification : POLYTHENE WASHER TO DRG.PART NO. ISV 1465 DC NO. 30799-A(FOR AMMN. CONTAINER 63A) , MATL:- HDPE TYPE-ISPECN.NO. JSS 9330-03 DC NO. 3490-ME. C Estab
16) 6572129007 CONT.38B (PLASTIC) Description : 6572129007 CONT.38B (PLASTIC)() Specification : CONT.38B, CONSISTING 1.BODY 2.LID .3.RING-A. 4.DISC 5.DISC 6.SLEEVE. C Estab
17) 6576700001 DISC POLYFOAM ISV 1809 CONT 67A Description : 6576700001 DISC POLYFOAM ISV 1809 CONT 67A() Specification : DISC (TOP & BOTTOM) PART NO.ISV 1809 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) CYLINDER GAS FOR LMG BELT FED[70]() Specification : CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED C Nonestab
2) HAND GUARD RIGHT and LEFT FOR LMG BELT FED[70]() Specification : HAND GUARD RIGHT & LEFT AS PER DRG.NO. 1804 01 01 00 00 001 00DA & 1804 01 01 00 00 002 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) FORE GRIP ASSEMBLY SK 6632 TE[70]() Specification : FORE GRIP ASSEMBLY SK- 6632/TE C Nonestab
2) MAGAZINE ASSEMBLY SK 6614 TE[70]() Specification : MAGAZINE ASSEMBLY SK- 6614/TE C Nonestab
3) HAND GUARD ASSEMBLY SK 6624 TE[70]() Specification : HAND GUARD ASSEMBLY SK- 6624/TE C Nonestab
4) Pistol Grip Assembly SK 6646 TE[70]() Specification : Pistol Grip Assembly SK-6646/ TE C Nonestab
5) Fore End assembly SK 6647 TE[70]() Specification : Fore End assembly SK -6647/ TE C Nonestab
6) Pistol Grip Box assembly SK 6649 TE[70]() Specification : Pistol Grip Box assembly SK- 6649/ TE C Nonestab
7) BUTT ASSEMBLY DRG No SK 6650 TE[70]() Specification : BUTT ASSEMBLY DRG No.SK-6650/TE C Nonestab
8) Knife Bayonet Assembly Drg No SK 6552 TE[70]() Specification : Knife-Bayonet Assembly Drg No. SK- 6552/ TE C Nonestab
9) FOLDING BUTT ASSEMBLY FOR GPMG DRG No SK GPMG 6321 REF DRG NO 1804 10 00 00 00 001 00DA[70]() Specification : FOLDING BUTT ASSEMBLY FOR GPMG 7.62X51MM DRG. NO.SK- GPMG-6321,(REF DRG NO 1804 10 00 00 00 001 00DA C Nonestab
Category : p
Grade : 3
Size : S
4022 THE SUPREME INDUSTRIES LIMITED
612 RAHEJA CHAMBERS NARIMAN POINT MUMBAI Maharashtra
PIN1 : 400021
Phone No. : 0224043000
GSTIN : 27AAACT1344F1ZO 		AAACT1344F

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024STR WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024STR WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM[21]() Specification : AS PER CQA(A) SPECN. C Nonestab
2) SET OF PROFEEL ANTISTATIC FITMENTS[21]() Specification : AS PER CQA(A) SPECN. C Nonestab
3) PACKING PIECE TOP & BOTTOM FOR PKG. OF FUZE YDB-60[21]() Specification : DRG. NO. ODC/AFK - 044 - 14 C Nonestab
4) DISC POLYTHENE OD 55 X 6 MM THICK[60]() Specification : AS PER SPECN. C Nonestab
5) DISC POLYTHENE O.D. 55 MM X 3 MM TH[60]() Specification : AS PER SPECN. C Nonestab
6) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.[21]() Specification : IND/ME/913 C Nonestab
7) INTERNAL PROFEEL FITMENT FOR CYLINDER[21]() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. C Nonestab
8) SET OF PKG. PIECES FOR LIMPET MINE[21]() Specification : A) BOTTOM 460 X 355 X 25 MM TH 1 NO. B) END 300 X 135 X 30 MM TH 2 NOS C) SIDE 360 X 135 X 30 MM TH 2 NOS D) TOP 455 X 350 X 25 MM TH C Nonestab
9) PIECE PACKING SET TO DRG ARDE 1930[21]() Specification : DRG NO ARDE 1930 DC 35965A (1) BOTTOM DET NO 3 PART ISV 1716 LENGTH 224MM -1 NO (2)TOP DET NO 4 PART ISV 1717 LENGTH 224MM 1 NO AND PIECES OF SIZES 174 X 113 X 25MM-2NOS, 274 X174X 15MM-2NOS, 113X 100 X 3MM-1NO C Nonestab
Category : p
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6570250010 PACKING FITMENT FOR 155 MM BBU AS PER DRG NO PROP SK 802[65]() Specification : PACKING FITMENT FOR 155 MM BBU AS PER DRG NO PROP SK 802 R Nonestab
2) 6570250009 PACKING BOX FOR 155 MM BBU AS PER DRG NO PROP SK 803[65]() Specification : PACKING BOX FOR 155 MM BBU AS PER DRG NO PROP SK 803 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2103218068 EXPANDED POLY FOAM 1000X 500X 10MM[21]() Specification : IS: 4671 - 1984 (FIRST REVISION) R.A-1999 SIZE: 1000 MM X 500 MM X 10 MM THICK. R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6576700001 DISC POLYFOAM ISV 1809 CONT 67A[65]() Specification : DISC (TOP & BOTTOM) PART NO.ISV 1809 R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2103218064 EXPANDED POLY FOAM 1000X 500X 20MM[21]() Specification : IS: 4671- 1984 R Nonestab
2) 2103218067 EXPANDED POLY FOAM 1000X 500X 6MM[21]() Specification : IS:4671 - 1984. R Nonestab
3) 1923415012 EXPANDED POLY FOAM 1000X500X12MM TH[19]() Specification : IS: 4671 - 1984 R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2103218071 PIECE PACKNG END 10MM TH RUDRA[21]() Specification : PIECE PACKING ENDSIZE: 172MM X 130MM X 10MM THICKMTL: EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3 R Nonestab
2) 2103218070 PIECE PACKNG SIDE 6MM TH RUDRA[21]() Specification : PIECE PACKING SIDESIZE:-274MM X 172MM X 6MM THICKMTL: EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3 R Nonestab
3) 2103218069 PIECE PACKNG TOP AND BTM 20MM TH RUDRA[21]() Specification : PIECE PACKING TOP & BOTTOMSIZE:-254MM X 130MM X 20MM THICKMTL:EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3 R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6356000017 LLDPE PACKAGE BOX FOR INFLUENCE MINE MK II EMPTY ASSEMBLY TO ARDE DRG NO 9707 00 04 00 00 000 00TA AS PER QAP NO NFM IMMK II PKG 02[63]() Specification : LLDPE PACKAGE BOX FOR INFLUENCE MINE MK-II (EMPTY ASSEMBLY)TO ARDE DRG. NO. 9707 00 04 00 00 000 00TA AS PER QAP NO.NFM/IMMK-II/PKG/02 C Nonestab
2) 6570250311 FOAM PACKING FITMENT IN BOX M32[65]() Specification : FOAM PACKING FITMENTS IN WOODEN BOX M32 FOR MODULAR CHARGE350 GM AS PER DRG NO FQ/XIV/015 DATED 06/07/2021 R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PACKING BOX TO HOLD 3 WEAPONS AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL[70]() Specification : AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL E Nonestab
2) SUPPLY OF PACKING BOX AS PER DRG NO K 9024 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL E Estab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6570250007 PKG FIT FOR WOODEN BOX FOR RCC100MM TO SPECN NO HEMRL[65]() Specification : PKG.FIT.FOR WOODEN BOX FOR RCC100MM TO SPECN.NO.HEMRL HE/CAST-080 & MATL.EXPANDED LINKED POLYETHENE FOAM TO IND/ME 1023(PRO) DC NO.3857ME TO DT.14 QT.02NO,DT.15 QT.04NO,DT.16 QT.01NO,DT.03 QT.02NO,DT.04 QT.04NO,DT.05 QT.02NO,DT.06 QT.04NO C Nonestab
2) 6331431101 BOTTOM AND TOP PACKING SHEET TO SPECN HEMRL DRG HE CAST 086DET 02 CHARGE HOLDING TRAY[63]() Specification : BOTTOM & TOP PACKING SHEET TO SPECN. HEMRL DRG HE/CAST 086DET-02, CHARGE HOLDING TRAY(SUB ASSLY) TO SPECN HEMRL DRG HE/CAST 086 DET-03 SADDLE HOLDING TRAY TO SPECN.HEMRL DRG.HE/CAST 086 DET-09 MATL:ALL ABOVE ITEMS IS MADE BY EXPANDEDLINKE C Estab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) GASKET I FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.20 C Nonestab
2) GASKET II FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.21 C Nonestab
3) PACKING FITMENT OF 81MM ATAL SMOKE GRENADE[62]() Specification : DRG.NO.HEMRL PYRO/SK.0275(PROV) C Nonestab
Category :
Grade : Grade III
Size : L
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN. Description : SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
3) INTERNAL PROFEEL FITMENT FOR CYLINDER() Specification : INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING. R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ANTISTATIC POLYETHYLENE CUSHIONINGMATERIAL Description : ANTISTATIC POLYETHYLENE CUSHIONINGMATERIAL() Specification : AS PER HEMRL DRAWING NO.HEMRL/SRP/AK/BST/10.1, DET NO. 2& DOC NO.HEMRL/SRP/AK/BST/10.1 DET NO.1 AS PER TECHNICAL SPECIFICATIONS ANDQUALITY DOCUMENT FOR COMPOSITE BOOSTER PROPELLANT NO.R2 R Estab
2) PROFEEL PACKING FOR BBU MADE Description : PROFEEL PACKING FOR BBU MADE() Specification : SPECN. NO. IND/ME/913 AND AS PER DRG. NO. OFI/2007/GMP/102 SHEET 1/2 & 2/2. R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ANTISTATIC POLYETHYLENE CUSHIONINGMATERIAL Description : ANTISTATIC POLYETHYLENE CUSHIONINGMATERIAL() Specification : AS PER HEMRL DRAWING NO.HEMRL/SRP/AK/BST/10.1, DET NO. 2& DOC NO.HEMRL/SRP/AK/BST/10.1 DET NO.1 AS PER TECHNICAL SPECIFICATIONS ANDQUALITY DOCUMENT FOR COMPOSITE BOOSTER PROPELLANT NO.R2 R Estab
2) PROFEEL PACKING FOR BBU MADE Description : PROFEEL PACKING FOR BBU MADE() Specification : SPECN. NO. IND/ME/913 AND AS PER DRG. NO. OFI/2007/GMP/102 SHEET 1/2 & 2/2. R Estab
Category : ddp
Grade : 1
Size : S
1) High Explosive Factory

[Deemed Registration]
Name Specification Use Status
1) SET OF PROFEEL Description : SET OF PROFEEL() Specification : (1) PIECE PACKING BOTTOM TO DRG NO. CQA(A)/AMN/3194 DC 36847A (2) PIECE PACKING MIDDLE TO DRG NO. CQA (A)/AMN/3195 DC 36847A (3) PIECE PACKING TOP TO DRG NO. CQA (A)/AMN/3196 DC 36847A R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Plastic Packaging Box for 10 JVPC[14]() Specification : Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072. C Nonestab
Category : p
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6191700063 PACKING BOX FOR ASSY OF PINAKA RKT[61]() Specification : PACKING BOX FOR ASSEMBLY OF PINAKA ROCKET ACCESSORIES TO ARDE DRAWING NO 8603 02 04 00 000 00 DA C Nonestab
Category : p
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6570250309 PACKING FITMENT FOR MINE AT 1B ND[65]() Specification : PACKING FITMENT FOR MINE A/T 1B WITH FUZE (QTY 4 NOS.) INBOX C-44A AS PER DRG NO. FQ/XI/177 C Nonestab
Category : p
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6572672227 CROSS LINKED POLYTHENE FOAM DISC[65]() Specification : DISC,FELT MATL.: CROSS LINKED POLYTHENE FOAM TO DRG. NO. ARDE 1203, DETAIL NO. 11, SIZE 69.0 MM DIA X 19 MM C Nonestab
2) 6570250308 PACKING FITMENT TOP AND DISC MIDDLE[65]() Specification : JSS 9330-03: 2007 C Nonestab
3) 6572129008 DISC CROSS LINKED CONT 38B[65]() Specification : DISC, CLOSED CELL CROSS LINKED POLYETHYELENE FOAM(CAP CELL) 46.5 MM DIA X 6 MM THICK DES.REF NO.CQA(A)/AMN/3042 DRG. NO. ISV-2017, DC.NO.36449A DT.30.07.98 DETAIL NO.2 FOR CONTAINER 38 B. R Nonestab
Category : p
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) PLASTIC MOULDED BOX FOR REVOLVER[14]() Specification : PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2, C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2[70]() Specification : PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2 C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) PLASTIC MOULDED BOX FOR REVOLVER[14]() Specification : PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2, C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2[70]() Specification : PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2 C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Plastic Packing Box for 10 JVPC[14]() Specification : Plastic Packing Box for 10 JVPC alongwith accessories C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Buffer for JVPC[70]() Specification : Buffer for JVPC 5.56MM X 30MM DRG No. 0204-03-02-03-22-005-00DB C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Plastic Packaging Box for 10 JVPC[14]() Specification : Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072. C Estab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Plastic Packaging Box for 10 JVPC[14]() Specification : Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072. C Estab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) PLASTIC MOULDED BOX FOR REVOLVER[14]() Specification : PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2, C Estab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Buffer for JVPC[70]() Specification : Buffer for JVPC 5.56MM X 30MM DRG No. 0204-03-02-03-22-005-00DB C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Plastic Packaging box for 10 JVPC along with accessories[14]() Specification : Plastic Packaging box for 10 JVPC 5.56X30MM along with accessories. drg. no.SK-JVPC-1072. C Estab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Packing Box for Revolver 0 32 Side Swing DRG No SK 6263 R SW[25]() Specification : Packing Box for Revolver 0.32 Side Swing DRG No.SK-6263 R/SW. C Nonestab
2) PACKING BOX FOR LMG[25]() Specification : PACKING BOX FOR 7.62 X 51MM LMG.DRG NO.SK-6126* C Nonestab
3) DEVELOPMENT MANUFACTURE AND SUPPLY OF PACKING BOX AS PER SPECIFICATION NO 7167 PACKING BOX SPEC CQB ATTACHED[70]() Specification : AS PER SPECIFICATION NO.7167/PACKING BOX/SPEC/CQB (ATTACHED) C Nonestab
Category :
Grade : Grade III
Size : L
4023 Shilpa Agencies Textile Division
16/52, CIVIL LINES FIRST FLOOR, BARAF KHANA KANPUR KANPUR Uttar Pradesh
PIN1 : 208001
Phone No. : 3248426
GSTIN : 09AAJFS7957H1ZH 		AAJFS7957H

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) THERMAL BONDED BATTING POLYESTER 100 GSM 150 CM WIDTH[21]() Specification : AS PER APPENDIX 'B" OF PROV. SPECIFICATION NO. IND/TC/4587(d) AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER CQA(T&C) KANPUR QAI NO.CQA (T&C)/QAI/99 TC-11 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) SET OF INNER FILLING INSULATION MATERIAL A AND B INNER JACKET THERMO PLASTIC POLYMER[21]() Specification : SET OF INNER FILLING INSULATION MATERIAL 'A' & 'B' (INNER JACKET) THERMO PLASTIC POLYMER - MATERIAL 'A' - 60GSM, WIDTH 150 CM (MIN.), CLO VALUE > 1.0 AND MATERIAL 'B' - 100 GSM WIDTH 150 CM (MIN.), CLO VALUE >2.0 SPECIFICATION :- AS P R Estab
2) INNER FILLING INSULATION MATERIAL OUTER JACKET THERMO PLASTIC POLYMER 110 GSM WIDTH 150 CM MIN[21]() Specification : INNER FILLING INSULATION MATERIAL (OUTER JACKET) THERMO PLASTIC POLYMER 110 GSM WIDTH 150 CM. (MIN.) SPECIFICATION :- AS PER APPENDIX 'C' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) Batting Polyester 350 GSM in 91 cm[21]() Specification : as per requirement R Nonestab
Category : p
Grade : Grade III
Size : S
4024 Nexgen Fluoropolymers Pvt Ltd
402, Pearls Omaxe, Tower-1, Netaji Subhash Place, Pitampura, New Delhi Delhi
PIN1 : 110034
Phone No. : 43057430
GSTIN : 08AADCN3119R1Z1 		AADCN3119R

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300003 TEFLON SHT ERA PANEL[64]() Specification : HEMRL/ED/PS/286, R Estab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) TEFLON SHEET FILM Description : TEFLON SHEET FILM() Specification : TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2 R Estab
2) TEFLON SHEET POUCH 278 Description : TEFLON SHEET POUCH 278() Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2 R Estab
3) TEFLON SHEET POUCH 300 Description : TEFLON SHEET POUCH 300() Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2 R Estab
4) TEFLON SHEET POUCH 360 Description : TEFLON SHEET POUCH 360() Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300007 TEFLON SHT FILM[64]() Specification : HEMRL/PS/286. R Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300004 TEFLON SHT[64]() Specification : HEMRL /ED/PS/286 R Nonestab
Category : p
Grade : Grade III
Size : SS
4025 KRISHNA ENTERPRISES
H.O. 106, STREET NO. 2, KALKA BHAVAN, GOVINDPURI, KALKAJI, NEW DELHI DELHI
PIN1 : 110019
Phone No. : 9811818650 		AAJFK6314N

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) GASKET LARGE OF DRG NO ADRDE 1118 FOR AN 32 PLATFORM 6245001118 Description : GASKET LARGE OF DRG NO ADRDE 1118 FOR AN 32 PLATFORM 6245001118() Specification : GASKET LARGE OF DRG. NO.ADRDE-1118 FOR AN-32 PLATFORM C Estab
2) GASKET SMALL OF DRG NO ADRDE 1117 FOR AN 32 PLATFORM 6245001417 Description : GASKET SMALL OF DRG NO ADRDE 1117 FOR AN 32 PLATFORM 6245001417() Specification : GASKET SMALL OF DRG NO ADRDE-1117 FOR AN-32 PLATFORM C Estab
3) GASKET TAPERED OF DRG NO ADRDE 1438 FOR AN 32 PLATFORM 6245001438 Description : GASKET TAPERED OF DRG NO ADRDE 1438 FOR AN 32 PLATFORM 6245001438() Specification : GASKET (TAPERED) OF DRG. NO.ADRDE-1438 FOR AN-32 PLATFORM (Item Code:6245001438) C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 2029992283 RING SECURING ISV 1122 Description : 2029992283 RING SECURING ISV 1122() Specification : SECURING RING,DRG.PART NO.ISV-1122, DC 35975-A. C Estab
Category : s
Grade : 3
Size : S
4026 Uma Udyog
S.No.64/5, Vadgaon Budruk, Sinhagad Road Pune Maharashtra
PIN1 : 411041
Phone No. : 9881198440
GSTIN : 27AABFU4476H1ZX 		PNEU00357A

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) 6381210301 SET OF COMPONENTS FOR PRIMER M191A2[63]() Specification : SET OF COMPONENTS FOR PRIMER M191 A2 CONSISTING OF PLUNGER, PLUNGER GUIDE, WASHER SEALING, IGNITION ELEMENT AND INNER CASE AS PER ATTACHED ANNEXURE "A" C Nonestab
Category :
Grade : Grade III
Size : S
4027 JAI JOGANI PALLETS
PLOT NO-5639/H,PHASE-2,GIDC VATVA, SHALA MANDIR ROAD, NR. VINZOL GAM,AHMEDABAD-382445 VATVA AHMEDABAD Gujarat
PIN1 : 382445
Phone No. : 9825005447
GSTIN : 24AAHHG1323H1ZR 		AAHHG1323H

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) WOODEN PALLET FOR PACKING BOMB 12O[65]() Specification : WOODEN PALLET-FOR PACKING BOMB 120 E Nonestab
Category :
Grade : Grade III
Size : S
4028 TAIKO PACK TACH INDIA LLP
Gat No 1624, Opp Indospace Industrial Park, MIDC Ranjangaon, Shirur Pune-Nagar Road Ranjangaon Ganpati Maharashtra
PIN1 : 412220
Phone No. : 9096849592
GSTIN : 27AAKFT6736C1Z0 		PNET16990B

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) WOODEN PALLET FOR PACKING BOMB 12O[65]() Specification : WOODEN PALLET-FOR PACKING BOMB 120 E Nonestab
Category :
Grade : Grade III
Size : S
4029 KAMAKSHA THERMOCOL
PLOT NO C-3/1, MIDC RANJANGAON TAL SHIRUR, DIST PUNE, RANJANGAON MAHARASHTRA
PIN1 : 412210
Phone No. : 9325096929 		TNEK06340F

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PKG PIEC T&B 255mmL x 130mmW x10mmT() Specification : AS PER SPECN. R Estab
2) PKG PIEC END 175MM X 140MM X10MM TH() Specification : DRG.NO. KF/SK 1834 DT.16.01.89 R Estab
3) PKG PIEC SIDE 255mmL X175mmW X 5mmT() Specification : DRG. NO.KF/SK-1834 DT. 16.1.89 R Estab
4) PIC PKG TOP 460mmx175mmx20mm THICK() Specification : MATERIAL EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KG PER CUBIC METRE. R Estab
5) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 265 MM X 146 MM X 12 MM() Specification : EXPANDED POLYSTYRENE FOAM TYPE 2 SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METRE TO SPECN IS:4671-1984 (FIRST REVISION) SIZE 265 MM X 146 MM X 12 MM. R Estab
6) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 275 MM X 142 MM X 12 MM() Specification : EXPANDED POLYSTYRENE FOAM TYPE 2 SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METRE TO SPECN IS:4671-1984 (FIRST REVISION), SIZE 275 MM X 142 MM X 12 MM. R Estab
7) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 146 MM X 120 MM X 12 MM() Specification : EXPANDED POLYSTYRENE FOAM TYPE 2 SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METRE TO SPECN IS:4671-1984 (FIRST REVISION), SIZE 146 MM X 120 MM X 12 MM. R Estab
8) POLYSTRENE FOAM TYPE2, 275X142X6MM() Specification : IS:4671-1984 R Estab
9) PIECE PACKING THERMOCOL 365X220X10() Specification : IS: 4671-1984 REAFFIRMED 1990 TYPE II OF AVERAGE DENSITY 15 TO 20 KG/M CUBE R Estab
10) PIECE PKG. POLYSTRINE 250X170X12MM() Specification : IS:4671_1984 R Estab
11) PIECE PKG. POLYSTERINE 240X110X15() Specification : IS:4671_1984 R Estab
12) PKG. PIECES MIDDLE 130 X120 X6 MM() Specification : IS :4671_1984(FIRST REVISION) TYPE-2 R Estab
13) PIECE PKG.END POLYSTE. 170X14015MM() Specification : IS:4671_1984(FIRST REVISION)TYPE-2 . ( REAFFIRMED 2004 ) R Estab
14) PIECES PKG.OF MAT.EXP.POLY.FOAM() Specification : IS:4671-1984 R Estab
15) SEPERATOR OF POLY.FOAM 278X190X6MMT() Specification : IS-4671-1984 R Estab
16) END PKG PIECE 230X335X20MM POLYSTYRENE FOAM() Specification : IS:4671-1984 R Estab
Category : p
Grade : 3
Size : S
4030 SYNERGY SYSTEMS
198, 1st floor, VKV Buiding, Nehru Street, Ramnagar, Coimbatore RAMNAGAR Coimbatore Tamil Nadu
PIN1 : 641009
Phone No. : 2233659
GSTIN : 33AZXPS8517Q2Z2 		TN38BX1453

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) SENSOR TYPE 15D 32 FOR STABILIZER 1G46 TO DRG NO6S2320016 2TU LF 7440200730[74]() Specification : SENSOR TYPE 15D-32- FOR STABILIZER 1G46 TO DRG. NO6S2320016-2TU (LF 7440200730) C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) CONNECTOR P 2RMG18B7SH1E2B 9927083887[99]() Specification : CONNECTOR-PLUG 2RMG18B7SH1E2B , AS PER SPECN.NO:OLF/AL/CON/02 /H AND JSS-50860 C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) 7440200840 TRANSISTOR 2T834V[74]() Specification : 7440200840 TRANSISTOR 2T834V Drg No.AAO.339.209 TY TRANSISTOR 2T834V TO SPEC NO.A AO339209TY FOR POWER UNIT OF 1G46 C Nonestab
Category :
Grade : Grade III
Size : S
4031 OM TRADERS
Plot no,86 B/H Supreme packaging,dhandha,himatnagar, HIMATNAGAR HIMATNAGAR Gujarat
PIN1 : 383001
Phone No. : 222595
GSTIN : 24AZBPS5187N1ZQ 		AZBPS5187N

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) WOODEN PALLET FOR PACKING BOMB 12O[65]() Specification : WOODEN PALLET-FOR PACKING BOMB 120 E Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) WOODEN PALLET FOR PACKING BOMB 12O[65]() Specification : WOODEN PALLET-FOR PACKING BOMB 120 E Nonestab
Category :
Grade : Grade III
Size : S
4032 ANALOGICS TECH INDIA LIMITED
Plot No. 9/10, Road No. 6, Nacharam Industrial Estate Hyderabad Telangana
PIN1 : 500076
Phone No. : 67355000 		AABCA7421P

Download 		1) Machine Tool Proto Type Factory
Name Specification Use Status
1) SUPPLY OF EPD FUZE PCBS(PCB-I& PCB-II)ASSEMBLED WITH ALL ELEC TRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE-'A' AND ANNEXURE-'B' RESPECTIVELY.[99]() Specification : SUPPLY OF EPD FUZE PCBS(PCB-I& PCB-II)ASSEMBLED WITH ALL ELEC TRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE-'A' AND ANNEXURE-'B' RESPECTIVELY. C Nonestab
Category : p
Grade : Grade III
Size : S
4033 HIRANYA ENTERPRISES
1-9-285/3/1 RAMNAGAR GUNDU HYDERABAD Telangana
PIN1 : 500044
Phone No. : 9948266636
GSTIN : 36CFEPP3366K1Z1 		CFEPP3366K

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) ZIRCONIUM POWDER TO SPECN ERDL HE PS 200[10]() Specification : SPECN NO ERDL/HE/PS/200 R Nonestab
Category :
Grade : Grade III
Size : S
4034 MARK ELEKTRIKS
PLOT NO, #15, GULTEKADI INDUSTRIAL ESTATE PUNE MAHARASHTRA
PIN1 : 411037
Phone No. : 02024268499
GSTIN : 27AABFM9350N1ZT 		AABFM9350N

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BLANK LABELS TO PRINT PACKERS() Specification : AS PER AFK SPECN. R Estab
2) THERMAL TRANSFER LABEL PRINTER() Specification : AS PER AFK SPECN. R Estab
Category : p
Grade : 3
Size : S
4035 STUTI ENTERPRISES
P-103, KALINDI HOUSING ESTATE, BLOCK A ROOM NO. 5 C, KALINDI VATIKA, 5TH FLOOR, KOLKATA WEST BENGAL
PIN1 : 700089
Phone No. : 03322318432 		AGPKB0196N

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PAPER FOR BASE WADS FOR PAPER CARTRIDGE CASES IN ROLLS OF 610 mm TO 914 mm WIDTH DIA OF ROLL 450 mm TO 600 mm TO SPECN JSS 9310 03 2010 REV 1 DC 5023 ME EXCEPT FOR BURSTING STRENGTH WHICH SHOULD BE BETWEEN 125 AND 250 KPa() Specification : JSS 9310 03 2010 REV 1 DC 5023 R Estab
Category : p
Grade : 3
Size : S
4036 M.J. ENTERPRISES
#31/B-1, KIADB INDUSTRIAL AREA, HOSKOTE, BENGALURU KARNATAKA
PIN1 : 562114
Phone No. : 08027971569 		AANPP9658C

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) PAPER KRAFT AMMUNITION Description : PAPER KRAFT AMMUNITION() Specification : PAPER KRAFT AMMUNITION 48.2CM X 63.4CM SUBSTANCE 125 PLUS OR MINUS 5 GSM SPECN: JSS 8135-017:2016 DC 5493-ME DT 24-09-2016 R Estab
2) PAPER WRAPPING WAXED KRAFT AMMUNITION Description : PAPER WRAPPING WAXED KRAFT AMMUNITION() Specification : JSS 8135-05-2017 (REV. No.5) R Estab
Category : p
Grade : 1
Size : S
4037 RAMA PACKAGING INDUSTRIES.,
375/4B, ZARI CAUSEWAY ROAD, VILLAGE-KACHIGAM, NANI DAMAN DAMAN DAMAM AND DIU
PIN1 : 396210
Phone No. : 022-24463990 		ADYPC5329B

Download 		1) Ordnance Factory Ambernath

[ENR Registration]
Name Specification Use Status
1) POLYTHENE BAG CCL70 Description : POLYTHENE BAG CCL70() Specification : JSS:9339-03-2014 REV.NO.3 E Estab
2) POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG. CASE Description : POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG. CASE() Specification : POLYTHENE PROTECTIVE BAG AS PER MATL. LDPE GRADE TYPE 1 TO SPECN JSS 9330-03:2007 REV NO.2 FOR 84MM CG CC OF SIZE LENGTH 440-450 MM, DIA 110, LAY FLAT 173(+10,-0), THICKNESS 0.26-0.06 AS PER DRG. NO. CG84/SK/11003/C DT 14/11/2010 AMENDED E Estab
3) POLYTHENE BAG FOR 130 MM CARTRIDGE CASE Description : POLYTHENE BAG FOR 130 MM CARTRIDGE CASE() Specification : POLYTHENE WEATHER PROOF PROTECTIVE BAG FOR CARTG. CASE 130MM TO DRG. NO. CC130/SK/0007/C DT 24/02/2004 SHEET NO.1/1 AMENDED UPTO 16/06/2016 TO SPECN. JSS:9330-03-2014, REV. NO.3, LDPE GRADE TYPE 1. E Estab
4) POLYTHENE BAG RW142 Description : POLYTHENE BAG RW142() Specification : JSS;9339-03-2014 REV NO.3, L.D.P.E GRADE TYPE 1. E Estab
5) POLYTHENE BAG FOR CSR76 Description : POLYTHENE BAG FOR CSR76() Specification : JSS:9330-03-2014 REV.NO.3, L.D.P.E GRADE TYPE 1. E Estab
6) POLYTHENE BAG FOR CCL60 Description : POLYTHENE BAG FOR CCL60() Specification : JSS:9330:03:2014 REV NO.3 L.D.P.E GRADE TYPE 1 E Estab
Category : dp
Grade : 3
Size : M
4038 ID TECHNOLOGIES
S. NO. 81/3, SHIVANE VILLAGE, NEAR VISHNU MALTI INDUS, ESTATE TAL. HAVELI, PUNE MAHARASHTRA
PIN1 : 411023
Phone No. : 020-67642400
GSTIN : 27ACTPJ4977G1ZX 		ACTPJ4977G

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BLANK LABELS TO PRINT PACKERS() Specification : AS PER AFK SPECN. R Estab
2) ONE SET OF BLANK LABLES() Specification : L3/LABEL & RIBBON/02 R Estab
3) THERMAL TRANSFER LABEL PRINTER() Specification : AS PER AFK SPECN. R Estab
4) THERMAL TRANSFER LABEL RIBBON BLACK() Specification : THERMAL TRANSFER LABEL RIBBON COLOUR BLACK SIZE : 101 MM X 360 MTERS. MATERIAL SONY TR 4085 R Estab
5) WHITE BLANK LABEL TO PRINT LABEL H() Specification : LABEL H 1003 MATERIAL : CHROMO 90 GSM R Estab
Category : p
Grade : 3
Size : S
4039 synthetic & natural rubber industries
opp mala flour mill kunda road partapur opp mala flour mill kunda road partapur meerut Uttar Pradesh
PIN1 : 250103
Phone No. : 4009520
GSTIN : 09AAJFS5326E1Z4 		MRTS00293G

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) O RING I D 38 0 MM 250KG 6241101204[62]() Specification : "O" RING I.D. 38.0 MM ,DIA WITH DIA 3.5 MM AS THICK TO SPECN IND/ME/884(PROV)C3 FOR 250 KG HSLD BOMB. C Nonestab
2) NEOPRENE RUBBER WASHER 450 KG (6231401501)[62]() Specification : WASHER NEOPRENE RUBBER SPECN. IND/ME/884 [PROV] C3 TO DRG. NO. ARDE 2122 DET 15. [DRG. ENCLOSED FOR DIMENSION ONLY C Nonestab
3) WASHER (RUBBER) 250KG (6240901300)[65]() Specification : WASHER AS PER DRG. NO. ARDE 9501 -01 DET 12 TO SPECN. NEO- PRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED. FOR 250 KG HSLD BOMB. C Nonestab
Category : ddp
Grade : Grade III
Size : M
4040 GBS PRODUCTS & SERVICES
PLOT NO.-16,PATIL LAYOUT,DATTAWADI, NAGPUR MAHARASHTRA
PIN1 : 440023
Phone No. : 09112288703
GSTIN : 27AAUPW5212C1ZH 		AAUPW5212C

Download 		1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) BOLT Description : BOLT() Specification : AS PER GCF REQUIRED/DRG./ SPECIFICATION C Estab
2) SCREW Description : SCREW() Specification : SCREW M14X30 TO DRG.NO.T90/35/T069/2 C Estab
3) CIRCLIP PLIERS FOR EXTERNAL Description : CIRCLIP PLIERS FOR EXTERNAL() Specification : CIRCLIP PLIERS 10-25MM FOR INTERNAL RERAINING RINGS FROM D-90 DEG. ANGLED TIPS C Estab
4) CIRCLIP PLIERS FOR INTERNAL Description : CIRCLIP PLIERS FOR INTERNAL() Specification : CIRCLIP PLIERS 12-25MM FOR INTERNAL RERAINING RINGS FROM D-90 DEG. ANGLED TIPS C Estab
5) SCREW DRIVER FOR SLOTTED HEAD SCREW Description : SCREW DRIVER FOR SLOTTED HEAD SCREW() Specification : AS PER GCF DRG./SPECIFICATION/REQUIREMENT C Estab
Category : s
Grade : 3
Size : S