List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4221 STEEL ARTS
23, JAGAIPURWA, CHAKERI ROAD LAL BANGLOW KANPUR U.P.
PIN1 : 208007
Phone No. : 9936433693
GSTIN : 09AAQPJ2350N1Z8 		KNPR01122G

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Cylinder Gas for LMG Belt Fed Description : Cylinder Gas for LMG Belt Fed() Specification : Cylinder Gas (Exdptl) DRG No. ARDE/SK/108/010 for LMG 7.62 MM Belt Fed C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Estab
2) Steel Blank for Receiver plate for MAG 7.62MM Description : Steel Blank for Receiver plate for MAG 7.62MM() Specification : AS PER DRG. C Estab
3) STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884 Description : STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884() Specification : AS PER DRG C Estab
4) BARREL BLANK FOR REVOLVER Description : BARREL BLANK FOR REVOLVER() Specification : AS PER DRAWING C Estab
5) BODY TRIGGER Drg. No 1099 A Description : BODY TRIGGER Drg. No 1099 A() Specification : AS PER DRG C Estab
6) BLOCK REAR FINISH Drg. No SK 454/4/1 Description : BLOCK REAR FINISH Drg. No SK 454/4/1() Specification : AS PER DRG C Estab
7) Sear auto carbine Drg. No. AKC-O1/11 Description : Sear auto carbine Drg. No. AKC-O1/11() Specification : AS PER DRG. C Estab
8) SEAR AUTO FOR SMALL ARMS Description : SEAR AUTO FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) Catch Barrel to DRG No. PH-1-5 (without heat treatment) Description : Catch Barrel to DRG No. PH-1-5 (without heat treatment)() Specification : Catch Barrel to DRG No. PH-1-5 (without heat treatment) C Estab
10) CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 Description : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10() Specification : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 C Estab
11) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
12) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
13) Lever Extractor PH-1-7 Description : Lever Extractor PH-1-7() Specification : As per Drg. C Estab
14) SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION Description : SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION() Specification : SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97 C Estab
15) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
16) Bracket Carrying Handle 1005-006604 Description : Bracket Carrying Handle 1005-006604() Specification : As Per Drg. C Estab
17) FRONT FEED PAWL for MAG Description : FRONT FEED PAWL for MAG() Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02 C Estab
18) REAR SIGHT CURSOR FOR SMALL ARMS Description : REAR SIGHT CURSOR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
19) COVER CATCH for MAG Description : COVER CATCH for MAG() Specification : COVER CATCH TO DS CAT NO. 1005-000464 DC(I) NO. 27019-SA DT- 28.01.17. C Estab
20) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. Description : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.() Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. C Estab
21) COLLAR MOUNTING FRONT for MAG Description : COLLAR MOUNTING FRONT for MAG() Specification : COLLAR MOUNTING FRONT TO DS CAT NO.3120-004671 DC(I) NO.25310-SA DT.30/03/02 IN FINISHED CONDITION C Estab
22) BODY BARREL LOCKING CATCH DS CAT 1005-006830 Description : BODY BARREL LOCKING CATCH DS CAT 1005-006830() Specification : AS PER DRG DS CAT 1005-006830 C Estab
23) EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. Description : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.() Specification : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. C Estab
24) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM() Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM C Estab
25) Guide DS CAT No. 1005-006843 Description : Guide DS CAT No. 1005-006843() Specification : AS PER DRG. C Estab
26) FEED ARM FOR AIR VERSION for MAG Description : FEED ARM FOR AIR VERSION for MAG() Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION C Estab
27) SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) Description : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 )() Specification : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) C Estab
28) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
29) SPRING COVER CATCH IN FINISHED CONDITION FOR MAG Description : SPRING COVER CATCH IN FINISHED CONDITION FOR MAG() Specification : DS CAT NO.5360-006984 DC(I)NO.27018-SA DT.27.01.17. C Estab
30) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Estab
31) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Estab
2) Steel Blank for Receiver plate for MAG 7.62MM Description : Steel Blank for Receiver plate for MAG 7.62MM() Specification : AS PER DRG. C Estab
3) STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884 Description : STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884() Specification : AS PER DRG C Estab
4) BARREL BLANK FOR REVOLVER Description : BARREL BLANK FOR REVOLVER() Specification : AS PER DRAWING C Estab
5) BODY TRIGGER Drg. No 1099 A Description : BODY TRIGGER Drg. No 1099 A() Specification : AS PER DRG C Estab
6) BLOCK REAR FINISH Drg. No SK 454/4/1 Description : BLOCK REAR FINISH Drg. No SK 454/4/1() Specification : AS PER DRG C Estab
7) Sear auto carbine Drg. No. AKC-O1/11 Description : Sear auto carbine Drg. No. AKC-O1/11() Specification : AS PER DRG. C Estab
8) SEAR AUTO FOR SMALL ARMS Description : SEAR AUTO FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) Catch Barrel to DRG No. PH-1-5 (without heat treatment) Description : Catch Barrel to DRG No. PH-1-5 (without heat treatment)() Specification : Catch Barrel to DRG No. PH-1-5 (without heat treatment) C Estab
10) CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 Description : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10() Specification : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 C Estab
11) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
12) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
13) Lever Extractor PH-1-7 Description : Lever Extractor PH-1-7() Specification : As per Drg. C Estab
14) SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION Description : SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION() Specification : SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97 C Estab
15) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
16) Bracket Carrying Handle 1005-006604 Description : Bracket Carrying Handle 1005-006604() Specification : As Per Drg. C Estab
17) FRONT FEED PAWL for MAG Description : FRONT FEED PAWL for MAG() Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02 C Estab
18) REAR SIGHT CURSOR FOR SMALL ARMS Description : REAR SIGHT CURSOR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
19) COVER CATCH for MAG Description : COVER CATCH for MAG() Specification : COVER CATCH TO DS CAT NO. 1005-000464 DC(I) NO. 27019-SA DT- 28.01.17. C Estab
20) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. Description : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.() Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. C Estab
21) COLLAR MOUNTING FRONT for MAG Description : COLLAR MOUNTING FRONT for MAG() Specification : COLLAR MOUNTING FRONT TO DS CAT NO.3120-004671 DC(I) NO.25310-SA DT.30/03/02 IN FINISHED CONDITION C Estab
22) BODY BARREL LOCKING CATCH DS CAT 1005-006830 Description : BODY BARREL LOCKING CATCH DS CAT 1005-006830() Specification : AS PER DRG DS CAT 1005-006830 C Estab
23) EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. Description : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.() Specification : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. C Estab
24) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM() Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM C Estab
25) Guide DS CAT No. 1005-006843 Description : Guide DS CAT No. 1005-006843() Specification : AS PER DRG. C Estab
26) FEED ARM FOR AIR VERSION for MAG Description : FEED ARM FOR AIR VERSION for MAG() Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION C Estab
27) SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) Description : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 )() Specification : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) C Estab
28) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
29) SPRING COVER CATCH IN FINISHED CONDITION FOR MAG Description : SPRING COVER CATCH IN FINISHED CONDITION FOR MAG() Specification : DS CAT NO.5360-006984 DC(I)NO.27018-SA DT.27.01.17. C Estab
30) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Estab
31) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Estab
2) STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884 Description : STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884() Specification : AS PER DRG C Estab
3) BARREL BLANK FOR REVOLVER Description : BARREL BLANK FOR REVOLVER() Specification : AS PER DRAWING C Estab
4) BODY TRIGGER Drg. No 1099 A Description : BODY TRIGGER Drg. No 1099 A() Specification : AS PER DRG C Estab
5) Block Rear drg .no. CQA(SA) SK-454/4/1 for Rifle 5.56mm Description : Block Rear drg .no. CQA(SA) SK-454/4/1 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
6) Sear auto carbine Drg. No. AKC-O1/11 Description : Sear auto carbine Drg. No. AKC-O1/11() Specification : AS PER DRG. C Estab
7) SEAR DRG FOR CARBINE 5 56MM IN FINISHED CONDITION Description : SEAR DRG FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : SEAR DRG NO AKC 01/10 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
8) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) SEAR FOR SMALL ARMS Description : SEAR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) Description : CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT)() Specification : DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) C Estab
11) CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 Description : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10() Specification : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 C Estab
12) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
13) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
14) Lever Extractor PH-1-7 Description : Lever Extractor PH-1-7() Specification : As per Drg. C Estab
15) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
16) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
17) Bracket Carrying Handle 1005-006604 Description : Bracket Carrying Handle 1005-006604() Specification : As Per Drg. C Estab
18) FRONT FEED PAWL for MAG Description : FRONT FEED PAWL for MAG() Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02 C Estab
19) Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433 Description : Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433() Specification : AS PER DRG. DS CAT 1005-000433 DC (I) 26752-SA DTD. 03.04.2015 C Estab
20) COVER CATCH for MAG Description : COVER CATCH for MAG() Specification : COVER CATCH TO DS CAT NO. 1005-000464 DC(I) NO. 27019-SA DT- 28.01.17. C Estab
21) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. Description : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.() Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. C Estab
22) COLLAR MOUNTING FRONT for MAG Description : COLLAR MOUNTING FRONT for MAG() Specification : COLLAR MOUNTING FRONT TO DS CAT NO.3120-004671 DC(I) NO.25310-SA DT.30/03/02 IN FINISHED CONDITION C Estab
23) BODY BARREL LOCKING CATCH DS CAT 1005-006830 Description : BODY BARREL LOCKING CATCH DS CAT 1005-006830() Specification : AS PER DRG DS CAT 1005-006830 C Estab
24) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM() Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM C Estab
25) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Estab
26) FEED ARM FOR AIR VERSION for MAG Description : FEED ARM FOR AIR VERSION for MAG() Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION C Estab
27) SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) Description : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 )() Specification : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) C Estab
28) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
Category : p
Grade : 3
Size : S
4222 K.E.ALLOYS (PVT.) LTD.
3/244 VISHNUPURI KANPUR U.P.
PIN1 : 208002
Phone No. : 9839029155 		AAHCS9963Q

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Steel flat 36mm x 62mm for JVPC Description : Steel flat 36mm x 62mm for JVPC() Specification : BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL STRIP 3.18MM*70MM*1200MM FOR BRACKET TO DRG. NO.CQA(I) 393 /37 Description : STEEL STRIP 3.18MM*70MM*1200MM FOR BRACKET TO DRG. NO.CQA(I) 393 /37() Specification : AS PER DRG. R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ST SHEET Description : ST SHEET() Specification : ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE). C Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SM SHEET CR Description : SM SHEET CR() Specification : SM SHEET CR 1.25X1250X2500MM BS:1449:PT.1:1983 CR-3 SEC.2 OR IS:513:1994 REQD.FOR STOP D S CAT NO 1005-000975 9MM MAGZINE CARBINE 1A1/CARBURIZING BOX. R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL ROUND 18 MM Description : STEEL ROUND 18 MM() Specification : STEEL ROUND 18.00 MM TO SPECN. BS:970PT.1:1983 GD.655 M13 (EN 36B).(FOR STUD CHANGE LEVER). R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) COLD ROLLED BRIGHT ANNEALED STEELSHEET Description : COLD ROLLED BRIGHT ANNEALED STEELSHEET() Specification : COLD ROLLED BRIGHT ANNEALED STEEL SHEET MADE FROM FULLY KILLED STEEL AS PER BS: 1449 PT 1 1983 GRADE -43/35 SIZE : 95MM+-0.25 WIDE THICKNESS 2.0MM+-0.06X920+15 MM LONG.( PART NO. ITV-46) R Estab
2) HOT ROLLED STEEL ROD 35MM Description : HOT ROLLED STEEL ROD 35MM() Specification : HOT ROLLED STEEL ROD 35MM (+0.07/-0.13) DIA SPECN. IS:1570 C-15 MN 75 FOR STRIKER HEAD AS PER DRG. NO. SK-6570/A MULTIPLE LENGTH OF 1 MTR R Estab
3) COLD DRAWN STEEL ROD 28 MM Description : COLD DRAWN STEEL ROD 28 MM() Specification : COLD DRAWN STEEL ROD 28 MM (+0.00/-0.13) DIA TO SPECN. IS: 1570, C20 IN 1 MTR LENGTH OR ITS MULTIPLE FOR LUG SUSPENSION (ITEM NO.8) OF ARM- 1099 C3/OFC DRG. NO. SK-6772. R Estab
4) Steel rod 85mm dia Description : Steel rod 85mm dia() Specification : Steel to specn. IS 1570-13 S-25 or 11 S25 of IS:1570-1979 size 85 mm (+/-1.30) dia in standard length (center plug Arm-1099 C4 Item No. 17) as per Drg. No. SK-9758 R Estab
5) CR steel bright annealed strip 1.05mm (+/-0.02mm) thick x 206mm(1.00) wide x 1045mm (+0.00/-5.00) long to material specn. steel to IS: 1570 C15 latest issue D.D. quality semikilled fine finish and best surface (to manufacture Vane Cylinder Arm-1099C2 Description : CR steel bright annealed strip 1.05mm (+/-0.02mm) thick x 206mm(1.00) wide x 1045mm (+0.00/-5.00) long to material specn. steel to IS: 1570 C15 latest issue D.D. quality semikilled fine finish and best surface (to manufacture Vane Cylinder Arm-1099C2() Specification : CR steel bright annealed strip 1.05mm (+/-0.02mm) thick x 206mm(1.00) wide x 1045mm (+0.00/-5.00) long to material specn. steel to IS: 1570 C15 latest issue D.D. quality semikilled fine finish and best surface (to manufacture Vane Cylinde R Estab
6) MS ROUND Description : MS ROUND() Specification : STEEL TO SPECN. IS:1570,C 20 COLD DRAWN ROD 1-1/4" (+0.004") IE 31.75MM DIA IN STANDARD LENGTH ( TAIL PLUG ARM -1099C4 ITEM NO. 20 AS PER OFC DRG. NO. SK-9757 R Estab
7) FORGED TO DIA 229 Description : FORGED TO DIA 229() Specification : FORGED TO DIA 229(+20MM) IN LENGTH OF 1 TO 1.5 METERS AS PER GR.MSF IX/3 (%C -0.95-1.15, SI -0.15-0.25, MN -2.0-2.5, S -0.03MAX, P-0.03MAX-CR.-0.3MAX) OR T90MN2W50CR45 AS PER IS:1570-1961) R Estab
8) STEEL ROD OF DIA 175MM Description : STEEL ROD OF DIA 175MM() Specification : STEEL ROD OF DIA 175MM X 60MM LENGTH OR ITS MULTIPLE LENGTH TO SPECN: IS:3749-1978 XT215 CR12 IN FORGED ANNEALED , SKIN TURN AND ULTRASONCALLY SOUND CONDITION, AS PER IS: 8791-1978 R Estab
9) STEEL ROD 102 Description : STEEL ROD 102() Specification : STEEL ROD 102 (+10)MM (4") DIA IN LENGTH OF 1 MTR TO 2 MTRS CLASS -IX/3 (%C-0.95-1.15, SI-0.15-0.25, MN -2.0-2.5,S-0.03MAX. P-0.03MAX, CR-0.03MAX) OR T90MN2W50CR45 AS PER IS: 1570-1961 R Estab
10) STEEL F AND A ROD 210 DIA X70MM SAE H10 Description : STEEL F AND A ROD 210 DIA X70MM SAE H10() Specification : STEEL FORGED & ANNEALED ROD 210 (+/-2 MM) DIA X 70 MM (+5MM) OR ITS MULTIPLE LENGTH OF 1 TO 2 METRE TO SPECN. SAEH -10 IN ROUGH MACHINED & ULTRASONICALLY SOUND CONDITION AS PER IS: 8791-1978 CLAUSE 9.1(A). R Estab
11) HSS ROD Description : HSS ROD() Specification : HSS ROD 2-1/2" DIA(63MM) TO SPECN. IS: 7291-1981 XT-72 W18 CR-4 V-1 TOLERANCE AS PER IS: 10604(PART-I)1983 R Estab
12) STEEL FLAT Description : STEEL FLAT() Specification : STEEL FLAT TO SIZE 12MM X 300MM TO SPECN. T-105CR5MN2 OF IS: 3749-1978 OR BS: 970 EN -31 IN LENGTH OF ONE TO TWO MTRS. R Estab
13) STEEL HSS ROUND 45 MM DIA Description : STEEL HSS ROUND 45 MM DIA() Specification : STEEL HSS ROUND 45 MM DIA TO SPECN. IS: 7291-1981 X T-72 W18 CR4 V-1 R Estab
14) Steel Flat to size 10mmX200mm in length of one meter Description : Steel Flat to size 10mmX200mm in length of one meter() Specification : MSF Class IX/3 or XII I/3 In forged & machined condition(Chemical composition: C-0.85-0.95%,SI-0.15-0.25%,MN-2.00-2.5%,S-0.03%,P- 0.03%,CR - 0.3% R Estab
15) HSS 70 MM DIA SPECN XT 72W Description : HSS 70 MM DIA SPECN XT 72W() Specification : H.S.S 70 MM DIA TO SPECN. XT-72 W18 CR4 V-1 OF IS -7291-1981 R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Equipment Factory

[ENR Registration]
Name Specification Use Status
1) COPPER TUBES VARIOUS Description : COPPER TUBES VARIOUS() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category : s
Grade : 3
Size : O
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL ROUND 14 MM DIA Description : STEEL ROUND 14 MM DIA() Specification : SPECN: BS:970: PT31:1991 GD 817 M40 OR 826 M40, R Estab
Category : s
Grade : 3
Size : S
4223 LUCKY ENGINEERING COMPANY
28, NEW JHILMIL INDUSTRIAL COMPLEX, G T ROAD, SHAHDARA NEW DELHI NEW DELHI
PIN1 : 110095
Phone No. : 011430907777
GSTIN : 06AAAFL9689E1Z0 		AAAFL9689E

Download 		1) High Explosive Factory

[Deemed Registration]
Name Specification Use Status
1) STRIKER DET 3 PART Description : STRIKER DET 3 PART() Specification : CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A C Estab
2) STRIKER LEVER (FOR HAND GRENADE) Description : STRIKER LEVER (FOR HAND GRENADE)() Specification : CQA(A) DRG.NO. ITW/6 GE AND PART NO. ITW/67 C Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) DETONATOR CONTACT ASSEMBLY AS PER ODC MTPF DRG NO 770 12 26 00[00]() Specification : DETONATOR CONTACT ASSEMBLY AS PER ODC MTPF DRG NO 770-12-26-00 C Nonestab
2) BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA A DRG NO 13021 0 0 DC I NO 35218 A DT 13 11 91 WITH CUP BOOSTER[63]() Specification : BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA(A) DRG. NO.13021-0-0.DC(I). NO.35218-A DT.13-11-91. WITH CUP BOOSTER TO CQA(A) DRG.NO.13032-0-0.DC(I). NO.36804-A DT.1-1-02.SPECN. NO. MIL-F-46996 B(MU),AIDEMEMOIRE B/14 AND CQA(A)PROOF C Nonestab
3) PIN CONNECTING TO CAT SECTION AND CAT PART NO 14 5315 001703 AND DRG CAT NO 24018[00]() Specification : PIN CONNECTING TO CAT SECTION AND CAT PART NO 14/ 5315- 001703 AND DRG CAT NO 24018 C Nonestab
4) PIN CONNECTING TO CAT SECTION CAT PART NO 14 5315 001704 AND DRG CAT NO 23705[00]() Specification : PIN CONNECTING TO CAT SECTION CAT/PART NO 14/5315-001704 AND DRG/ CAT NO 23705 C Nonestab
5) ANCHOR GUARD PLATE TO CAT SECTION AND CAT PART NO 14 5420 000214 AND DRG NO 24034[00]() Specification : ANCHOR GUARD PLATE TO CAT SECTION & CAT/PART NO.14/5420-000214 AND DRG.NO.24034 C Nonestab
6) COUPLING SHAFT TO CAT SECTION AND CAT PART NO 14 5420 000020 AND DRG CAT NO 23710[00]() Specification : COUPLING SHAFT TO CAT SECTION & CAT/PART NO.14/5420-000020 AND DRG/CAT NO.23710 C Nonestab
7) BODY TO CQA A DRG NO 13119 0 0 2 4416[00]() Specification : BODY TO CQA (A) DRG. NO. 13119-0-0-2-4416 (AS PER DC NO. 36804-A DATED 01/01/2002) C Nonestab
8) NUT COUPLING TO CAT SECTION AND CAT PART NO 14 5420 000018 AND DRG CAT NO 23704[00]() Specification : NUT COUPLING TO CAT SECTION AND CAT PART NO 14 5420 000018 AND DRG CAT NO 23704 C Nonestab
9) WINCH ANCHOR ASSY TO CAT SECTION AND CAT PART NO 14 3950 000004 AND DRG CAT NO AKW 16Z41[00]() Specification : WINCH ANCHOR ASSY TO CAT SECTION AND CAT PART NO 14 3950 000004 AND DRG CAT NO AKW 16Z41 C Nonestab
10) WINCH RAMP ASSY LH TO CAT SECTION and CAT PART NO 14 5420 000137 AND DRG CAT NO 23709 B[00]() Specification : WINCH, RAMP ASSY. LH TO CAT SECTION & CAT/PART NO.14/5420-000137 AND DRG./CAT NO.23709/B C Nonestab
11) WINCH RAMP ASSY RH TO CAT SECTION and CAT PART NO 14 5420 000138 AND DRG CAT NO 23709 B[00]() Specification : WINCH, RAMP ASSY. RH TO CAT SECTION & CAT/PART NO.14/5420-000138 AND DRG./CAT NO.23709/B C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING FOR GUIDE TRACK T 90 6120100103[61]() Specification : FORGING FOR GUIDE TO DRAWING NUMBER 172.55.013/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION C Estab
2) FORGING FOR CLAMP TRACK T 90 L F NO 6120100102[61]() Specification : FORGING FOR "CLAMP" TO DRAWING NUMBER 172.55.025/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION C Estab
3) FORGING FOR SHOE TRACK T 90 L F NO 6120100101[61]() Specification : FORGING FOR "SHOE" TO DRAWING NUMBER 219.35.126/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION. C Estab
4) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]() Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED] C Estab
5) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Estab
6) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 [W/O SURFACE TREATED. C Estab
7) PLUG FASTENING FOR 250 KG L F NO 6241101124[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Estab
8) PLUG FOR LUG HOUSING 250 KG L F NO 6241101114[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Estab
9) FIL PLUG MCD W O SUR 250 KG L F NO 6240000504[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Estab
10) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Estab
11) BOLT M20 X 1 POINT 5 6G TRACK T 90 L F NO 6120100107[61]() Specification : BOLT TO DRAWING NUMBER 172.55.026 (M20 x 1.5-6G){CQA(HV)}TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING. C Estab
12) BOLT M27 X 1 PINT 5 6G TRACK T 90 L F NO 6120100108[61]() Specification : BOLT TO DRAWING NUMBER 219-35-158 (M27 X 1.5-6G) {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]() Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES C Nonestab
2) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]() Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES. C Nonestab
3) ROLLING RING GENERAL ARRANGEMENT FOR 450 KG L F NO 6241100118[62]() Specification : (1)RING WELDING ASSY(TWO QUADRANT) AS PER DRAWING NO.ARDE-2122-18 SHTS 6 SHTS. NO.1,QTY-04 NOS. (2)COVER PLATE AS PER DRAWING NO.ARDE 2122-19,QTY-01 NOS. (3)CLAMPING PLATE AS PER DRAWING NO.ARDE-2122-20,QTY-01 NOS. (4)SPRING WASHER M 16 T C Nonestab
4) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]() Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) CONT EXP W O SUR 250 KG HSLD L F NO 6244121304[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
2) CONTAINER EXPLODER MCD 450 KG L F NO 6230701104[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
3) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED C Nonestab
4) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]() Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED C Nonestab
5) FILLING PLUG MCD 450 KG L F NO 6230400504[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
6) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED] C Nonestab
7) THRUSTER PLATE FOR 1000 LBS L F NO 6220200120[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. (DRG. ENCLOSED). C Nonestab
8) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
9) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
10) RING NUT MCD 450 KG L F NO 6230900904[62]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
11) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
12) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
13) PROTECTING RING ASSEMBLY L F NO 6220900611[62]() Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING TO DRG. NO. 1460D. R.NO. 9 DTD. 03-11-17 {NOTE:- TO COVER UP ASSEMBLY REJECTION ITEM NO.4 SHOULD BE SUPPLIED 5% EXTRA} [DRG. ENCLOSED]. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARTG TRG FOR 81MM MOR BOMB3B EMPTY[60]() Specification : CQA (A) 2348 C Nonestab
2) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]() Specification : I.A. 1204 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A TO DESIGNER'S REF.ARDE-1933 DETAIL NO. 2 PART NO.ITV-17 SA SHT 1&2 SPECN CQA(A)- 2322() Specification : CQA(A)- 2322 R Estab
2) STRIKER DET 3 PART ITW 65 DC (I)() Specification : CQA(A) 1504 R Estab
3) FILLING HOLE PLUG(ALUMN)() Specification : CQA(A)1504 R Estab
4) MINE APM CONSISTING OF BODY,SPOOL() Specification : CQA(A) 1804 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Forged Proof Machined Blank Heat Treated for Ring as SK-9042/B Description : Forged Proof Machined Blank Heat Treated for Ring as SK-9042/B() Specification : As per Drg. No. SK-9042/B C Estab
2) FORGED PROOF MACHINED BLANK FIN CYLINDER Description : FORGED PROOF MACHINED BLANK FIN CYLINDER() Specification : FORGED PROOF MACHINED BLANK FIN CYLINDER TO DRG. NO. SK- 8928/D C Estab
Category : p
Grade : 3
Size : S
4224 RIALTO ENTERPRISES PVT.LTD.
PLOT NO.- 13&14, OLD MAHABALIPURAM KOTTIVAKKAM CHENNAI TAMILNADU
PIN1 : 600041
Phone No. : 044-24483595
GSTIN : 33AAACR3589E1ZG 		CHER06488G

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) NUT ELEVATING FOR MONOPOD ASSEMBLY OF LMG Description : NUT ELEVATING FOR MONOPOD ASSEMBLY OF LMG() Specification : NUT ELEVATING TO DS CAT NO-5310-024602 DC(I) NO. 26955-SA DT. 05.10.16 FOR MONOPOD ASSEMBLY. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897 Description : Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897() Specification : AS PER DRG. C Estab
2) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56 Description : MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56() Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR) C Estab
3) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)() Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) C Estab
Category : p
Grade : 3
Size : S
4225 Multimetals Limited
Heavy Industries Area,Kansua Road, Rajasthan KOTA Rajasthan
PIN1 : 324003
Phone No. : 7118538 		AABCM6604J

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS TUBE 13 85X10 95X185L IS 407 LF 0717255200 Description : BRASS TUBE 13 85X10 95X185L IS 407 LF 0717255200() Specification : BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB. R Nonestab
Category : p
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION Description : BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION() Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION. R Estab
Category : p
Grade : 3
Size : L
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS TUBE 22 35X16 70MM BS2871 M Lf 0717559001 Description : BRASS TUBE 22 35X16 70MM BS2871 M Lf 0717559001() Specification : TUBING BRASS SEAMLESS 22.35+0.00/-0.15 MM OUTSIDE DIA X 16.70+0.10/-0.00MM INSIDE DIA WALL THICKNESS NOT LESS THAN 2.60MMIN THE STRAIGHT LENGHT OF 324+/-2.0 MM MATERIAL COMPOSITIONAS PER SPECN.BS-2871 PT-2 1972 CZ -126 M CONDITION.(STRESS R Nonestab
Category : p
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BRASS TUBE M 10583B TO SPEC JSS 9535 02 1995 REV NO1 UN ANNEALED AND STRESS RELIEVED FOR PR 18A MAGAZINE DRG NO IQX 192 Description : BRASS TUBE M 10583B TO SPEC JSS 9535 02 1995 REV NO1 UN ANNEALED AND STRESS RELIEVED FOR PR 18A MAGAZINE DRG NO IQX 192() Specification : BRASS TUBE(M-10583B) TO SPEC. JSS 9535-02:1995 (REV. NO.1) UN ANNEALED AND STRESS RELIEVED R Estab
Category : p
Grade : 3
Size : L
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) COPPER ALLOY TUBE ID 39point87 0point25 mm THICKNESS 3point2 mm BOTH ENDS CUT IN SQUARE IN STRAIGHT LENGTH 1point5 TO 3 MTRS AS PER SPEC NO JSS 4710 01 88 GR IV Description : COPPER ALLOY TUBE ID 39point87 0point25 mm THICKNESS 3point2 mm BOTH ENDS CUT IN SQUARE IN STRAIGHT LENGTH 1point5 TO 3 MTRS AS PER SPEC NO JSS 4710 01 88 GR IV() Specification : COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SAT R Estab
Category : ddp
Grade : 3
Size : L
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) GUILDING METAL COPPER ALLOY TUBE Description : GUILDING METAL COPPER ALLOY TUBE() Specification : GUILDING METAL COPPER ALLOY TUBE AS PER DRG. NO. SK-8370 FOR 155MM SMOKE F-007ER 24KM (BOFORS) R Estab
2) BRASS TUBE Description : BRASS TUBE() Specification : BRASS TUBE TO SIZE : O/D 9.53+/-0.076MM X 0.71MM WT IN MULTIPLE LENGTH OF 115MM TO SPECN. IS:407-1966 ALLOY-1 IN ANNEALED CONDITION OF STD. FOR CENTRAL TUBE (DRG. NO. ARM-1099C4 ITEM NO.19) R Estab
3) CU-NI DRIVING BAND BLANK DRG. NO. SK-7894/B Description : CU-NI DRIVING BAND BLANK DRG. NO. SK-7894/B() Specification : CU-NI DRIVING BAND BLANK DRG. NO. SK-7894/B R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE DIA 44 MM WITH MIN 1 5 MTR STRAIGHT LENGTH Description : BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE DIA 44 MM WITH MIN 1 5 MTR STRAIGHT LENGTH() Specification : BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 44 -0.1 0 MM WITH MIN 1.5 MTR STRAIGHT LENGTH R Estab
2) LEADED BRASS ROUND TO SPECN BS 2874 LATEST ISSUE GR CZ 121PB 3 IN M CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 3 POINT 658 MINUS 0 POINT 05 MM DIA Description : LEADED BRASS ROUND TO SPECN BS 2874 LATEST ISSUE GR CZ 121PB 3 IN M CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 3 POINT 658 MINUS 0 POINT 05 MM DIA() Specification : LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE: 3.658 -0.05 MM DIA R Estab
Category : ddp
Grade : 1
Size : S
4226 VIJAYA CHANDRA INDUSTRIES
PLOT No. 22 B, PHASE V, IDA CHERLAPALLY HYDERABAD Telangana
PIN1 : 500051
Phone No. : 27269999
GSTIN : 36ADFPK2431D1Z2 		ADFPK2431D

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SPRING TO 6206003118[62]() Specification : 155.27.376 C Nonestab
2) SPRING TO 6206102170[62]() Specification : 6206102170 C Nonestab
3) SPRING TO 6206109122[62]() Specification : 155.32.121 C Nonestab
4) SPRING TO 6206305580[62]() Specification : 6206305580 R Nonestab
5) SPRING TO 6206109025[62]() Specification : 172.11.079-1 C Nonestab
6) SPRING TO 6206109075[62]() Specification : 6206109075 C Nonestab
7) SPRING TO 6206209073[62]() Specification : 6206209073 C Nonestab
8) SPRING TO 6206609136[62]() Specification : 6206609136 C Nonestab
9) SPRING TO 6206609160[62]() Specification : 6206609160 C Nonestab
10) SPRING TO 6206102492[62]() Specification : 6206102492 C Nonestab
11) SPRING TO 6206111444[62]() Specification : 6206111444 C Nonestab
12) SPRING TO 6206609142[62]() Specification : 6206609142 C Nonestab
13) SPRING TO 6206801527[62]() Specification : 6206801527 C Nonestab
14) SPRING TO 6206004170[62]() Specification : 6206004170 C Nonestab
15) SPRING TO 6206113266[62]() Specification : AS PER DRG P Nonestab
16) SPRING TO 6206212217[62]() Specification : AS PER DRAWING P Nonestab
17) SPRING TO 6206603131[62]() Specification : AS PER DRAWING P Nonestab
18) SPRING TO 6206890218[62]() Specification : AS PER DRAWING P Nonestab
19) SPRING TO 6206201203[62]() Specification : AS PER DRAWING P Nonestab
20) SPRING TO 6206102475[62]() Specification : AS PER DRAWING P Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) SPRING MAIN FOR 9MM AUTO PISTOL 1A Description : SPRING MAIN FOR 9MM AUTO PISTOL 1A() Specification : As per drawing C Estab
2) Spring Catch Safety for 9mm Auto Pistol Description : Spring Catch Safety for 9mm Auto Pistol() Specification : As per drawing C Estab
Category : p
Grade : 3
Size : M
4227 PUNIT ENTERPRISES
30/17, D-2 BLOCK, MIDC CHINCHWAD, PUNE-411019 MIDC CHINCHWAD PUNE Maharashtra
PIN1 : 411019
Phone No. : 9822033017
GSTIN : 27AASPG6786H1Z0 		PNEUO5299A

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CAP TOP CLOSING FOR HAND FLARE[64]() Specification : DRG.NO.OFDR/CT/1/12/A3 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) POLY PROPYLENE DISC FOR 51MM SMOKE[62]() Specification : DRG. NO.CQA(A)/AMN/2868 PT.NO.ITV 252 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PARACHUTE HOUSING FOR 51 MM ILLG.[62]() Specification : DRG.ARDE 2064 DET NO. 24 PT NO.ITV 240 SPECN. NO. CQA(A) 2328(d) C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) RUBBER WASHER FOR 51MM ILLG.[62]() Specification : DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CYLINDER POLYTHENE FOR FOG SIGNAL[64]() Specification : OFDR/CARTG-84/R-3/A3 C Estab
2) Heat Shrink Tube for Shell 155mm Illg. M1A1[63]() Specification : [DRG. NO. 2440A03096] C Estab
3) RUBBER RING FOR MORTAR BOMB 81MM ILLG 2A[62]() Specification : CQA(A) 2345 (C)[DRG.NO. ARDE 1965, Det No.25, Part No. ITV 134] C Nonestab
4) CUP PLASTIC FOR 81MM ILLG MK-II[62]() Specification : DRG NO ARDE 2222 DET 10 PT NO ITV 262 SPECN. NO. CQA (A) 2345 (C) C Estab
5) SPRING HOLDER FOR 81MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 7 PT NO ITV 258 SPECN: NO. CQA(A) 2345(C) C Estab
6) RUBBER WASHER FOR 105 MM ILLG.[62]() Specification : DRG.ARDE 9769 DET NO 18 PART NO.ISX 432 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) O RING FOR MORTAR BOMB 81MM ILLG 2A[62]() Specification : CQA(A) 2345 (C) [DRG. NO. ARDE 2222, DET 6, PART NO ITV 263] C Nonestab
2) CUP HDPE FOR SHELL 84MM ILLG.[62]() Specification : F-1301-56251-A C Estab
3) CARRIER AMMN 17A FOR 81MM ILLG. MK-II[62]() Specification : DRG.NO ARDE 2224 PT NO ISV 551A SHEET NO.3 SPECN. NO. CQA(A) 2804 (M) C Nonestab
4) HALF CUP FOR BOMB 81 MM ILLG. MK-II[62]() Specification : DRG NO.ARDE 2224 DET NO.5 PT NO. ISV 1930 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) TRANSIT PLUG FOR SHELL 84 mm ILLG.[62]() Specification : CIA/AMMN/2220 C Estab
2) SET OF COMPONENTS FOR SIGNAL DISTRESS D/N 1 MK IN[64]() Specification : DRG. NOS. NAD-8611/38, 40, 37, 39, 27, 29, 2 AND 36 (TOTAL EIGHT) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) OUTER TUBE FOR PARA FLARE RED [61]() Specification : DRG.NO. OFDR/CT/34M/ U-I/A4 C Estab
2) VENTURY ASSEMBLY FOR PARA FLARE RED[62]() Specification : DRG NO OFDR/CT/14/UI A3 (AMENDMENT NO.88 DT 9/5/98) C Estab
3) BURSTER TUBE (STEEL) FOR PARA FLARE RED[62]() Specification : DRG.NO.OFDR/CT /19/ UI/A-4 (AMENDMENT NO.88 DT.9-5-98) C Estab
4) BASE YELLOW FOR PARA FLARE RED[61]() Specification : DRG NO.OFDR/CT/30/M/A-2. DATED 05/11/1996 C Nonestab
5) BOTTOM SAFETY COVER PARA FLARE RED[61]() Specification : DRG NO.OFDR/CT/41/M/UI/A-3 C Estab
6) SUPPORT FOR PARA FLARE RED[62]() Specification : DRG NO OFDR/CT/17/UI/A4 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SPOOL COMPLETE (ITEM NO. 18) POLY MOULDING FOR FTW[64]() Specification : DRG. NO. DD(L) 13461-A/1 C Estab
2) AMMUNITION CONTAINER 75A (ASSY)[65]() Specification : DRG. NO. CQA/AMN/3259 PART NO. ISV 583A C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Obturator for Shell 155mm Illg M1A1[63]() Specification : [DRG. NO. 155-1140] C Estab
2) Scuff Protector for Shell 155mm Illg M1A1[63]() Specification : [DRG. NO. 155-1110] C Estab
3) WASHER (ACROLUNITRILE BUTADINE RUBBER COMPOUND Grade E ) FOR SHELL 155MM ILLG Naschem M1A1[63]() Specification : DRG. NO. 155-1120 C Estab
4) Protector, Spilt half, drogue( HDPE) for Shell 155 mm Illg M1A1[63]() Specification : DRG.NO. 2440A03092 C Estab
5) Protector, Top drogue (HDPE Type-2) for Shell 155 mm Illg M1A1[63]() Specification : DRG.NO. 2440A03093 C Estab
6) SPACER[63]() Specification : SPACER TO DRG.NO. 2439A00016 DC 36552A DATED 24.4.99.MATL ACRYLONITRILE BUTADIENE RUBBER COMPOUND GRADE "D" [TO SPECN.NO.IND/ME/914(PROV). DC 3496ME DTD. 6/2/98. E Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PLAQUE PLASTIC LARGE DRG NO 155 1190 HDPE TO SPECN JSS 9330 03 1995 TYPE 2[63]() Specification : SPECN JSS 9330 03 1995 TYPE 2 C Estab
2) PLAQUE PLASTIC SMALL DRG NO 155 1200 HDPE TO SPECN JSS 9330 03 1995 TYPE 2[63]() Specification : SPECN JSS 9330 03 1995 TYPE 2 C Estab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BASE CAP (BLACK) FOR PROJECTILE() Specification : DRG. NO. AFK/PJ/SK-62/1 R Estab
2) PLUG TO DRG NO KF SK 1746() Specification : SPECN. NO. DGOF 135 (a) DT. 15.11.19 R Estab
3) CHARGE HOLDER TO DRG.NO.KF/SK-1746() Specification : DGOF 135 R Estab
4) PLUG FUZE HOLE, 35 MM NO. 6 AS PER DRG. NO. CIA/AMN/2125 PART NO. ITV 95() Specification : DRG. NO. CIA/AMN/2125 PART NO. ITV 95 R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC INDEX DISC-SHOT NO.1[60]() Specification : DRG. NO. AFK/SK-2888 C Nonestab
2) PLASTIC INDEX DISC-SHOT NO.6[60]() Specification : DRG.NO.AFK/SK-2888.DT. 17.01.2007SHT.1 C Nonestab
3) PLASTIC INDEX DISC-SHOT NO.BB[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
4) PLASTIC INDEX DISC-SHOT NO.8[60]() Specification : DRG NO. AFK/SK-2888 DT.04.05.2002 C Nonestab
5) PLASTIC INDEX DISC-SHOT NO.4 No[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
6) PLASTIC INDEX DISC-SHOT NO.7[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
7) PLASTIC INDEX DISC-SHOT NO.9[60]() Specification : DRG.NO.AFK/SK-2888 DT.11.01.2007 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SQUIB ASSY (EMPTY) FOR PYRO CTG.[60]() Specification : NASK 856 (PROVISIONAL) C Nonestab
2) SET OF PYRO SQUIB OPERATOR II-253ME[60]() Specification : DRG .NO. NASK--- 1089/1 (PROV.) C Nonestab
3) SQUIB PLUG BRIDGED FOR IGNITER[60]() Specification : DRG. NO. ERDL,1164 DET. 2 C Nonestab
4) COMPONENTS FOR SQUIB PSQ 6[60]() Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X C Nonestab
5) BRIDGED SQUIB[60]() Specification : DRG. NO. ERDL; 1320 DET. NO. 5. FOR SAM 5B-87 DT. 09.10.98 C Nonestab
6) SQUIB (EMPTY) FOR IGNITER EB-2[60]() Specification : DRG.NO. AFK-SK-343-06 DT.02.02.2006 C Nonestab
7) SQUIB HOLDER DRG.NO. AFK/SK-334-06][60]() Specification : DRG. NO. AFK/SK-334-06 R Nonestab
8) SQUIB HOLDER - DRG.NO. AK/SK-303-05[60]() Specification : DRG. NO. AFK/SK - 303-05 SHEET NO. 3/3 DT.27.11.2014 C Nonestab
9) SQUIB ASSEMBLY (EMPTY) TO DRG. NO ERDL 959 DET. 4 DT 14-09-76 FOR PP9 RST[64]() Specification : DRG. NO ERDL 959 DET. 4 DT 14-09-76 C Nonestab
10) MFG OF L.T SQUIB. DRG NO ERDL 563.[96]() Specification : DRG.NO.ERDL 563 DET NO. 7 DATE 9.6.89 C Nonestab
11) CHARGES FOR MISC JOB FOR LT SQUIB[96]() Specification : DRG NO.ERDL-1046 DET-2. Dt. 19.11.2009 R Nonestab
12) SQUIBS TO DRG NO.ERDL 1004 DET NO.1[99]() Specification : ERDL SPECN NO. ERDL/PYRO/PS/145 C Nonestab
13) SQUIB PLUG DET.ELEC.82 MK IN2[64]() Specification : DRG. NO. HEMRL DRG. 1443 DET. NO. 8 DT. 25.11.97 C Nonestab
14) SQUIB PLUG TO DRG. NO. ERDL DRG 897, DET NO. 7[60]() Specification : DRG. NO. ERDL DRG 897, DET NO. 7 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOX PLASTIC DRG NO AFK/SK-2224[14]() Specification : DRG NO. 04-44-79000-06130-3 C Nonestab
2) DISC LOW DENSITY POLYTHENE 3.2MM TH[21]() Specification : KF/SK-1572 C Nonestab
3) PLASTIC BOX FOR .22RF CARTGS.[65]() Specification : DRG. NO. AFK/SK 586-09 SHT. 1 C Nonestab
4) COLLAR NOSE TO DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942[60]() Specification : DRG NO ARDE 2233 DET NO.1 PART NO ISV 1942 C Nonestab
5) NYLON RING-DRG PT NO ITV 50[60]() Specification : DESIGN REF. CIA/AMN/1579 PART NO. ITV-50 C Nonestab
6) BASE CAP DRGN0 KF/PJ/SK-14DT22.8.85[60]() Specification : CQA[A] SEALED DRG NO -04-749-130222-01-4E C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PL.CONTAINER WITH SLEEVES FOR CCJC[60]() Specification : AS PER CQA(A) SPECN. C Nonestab
2) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]() Specification : CQA(A)2804 C Nonestab
3) CONTAINER TO DRG.NO. ARDE 2056[65]() Specification : DRG.NO ARDE 2025 DETAIL NO 1 C Nonestab
4) CONTAINER 38 B WITH SLEEVE A & B &[65]() Specification : DESGN REF NO. CIA/AMN/2008 C Nonestab
5) AMN.CONT. 67A,BOTTOM & TOPSLEEVE MR[60]() Specification : DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A C Nonestab
6) CONTAINER (FOR C.E PELLET)[60]() Specification : DRG 1396 PART NO IQX 1032, PART NO. IQX 1034, PART NO. IQX 1033 C Nonestab
7) CONTAINER NO. P-17,ARDE 1910 DET 1TO5 ERU204[65]() Specification : DRG NO ARDE 1910 DET. NO.1 & DET. NO. 5 C Nonestab
8) CONTAINER TO ARDE-1933 DET-4 ITV 170[60]() Specification : CQA (A) 2322 C Nonestab
9) WASHER SEALING TO DRG AFK/SK/2187[63]() Specification : DRG NO AFK/SK/2187 SHEET NO 1 C Nonestab
10) CONTAINER NO.P-14 TO HOLD CARTGS[60]() Specification : CQA(A) 2804 C Nonestab
11) AMMUNITION CONTAINER 47 B, DES. REF CIA/AMN/2483, PT. NO. ISV 515 A SPECN. NO CQA(A) 2804[65]() Specification : CQA(A) 2804 C Nonestab
12) CONTAINER FOR BOOSTER CHARGE[60]() Specification : DRG NO. NAI(V) 7002 (PROV) DT.23.7.04 WITH 2 NOS OF SPARE O RING TO DRG. NO. NAI (V) 7002/2 (PROV) DT. 23.7.04 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC POWER PISTON W/O POUCH 65MM[21]() Specification : AFK DRG.NO. KF/SK-1809 C Nonestab
2) HALF CUP B DRG.PT NO ISV 862,DCI-36[60]() Specification : DES REF NO CIA/AMN/851 DRG PT.NO. ISV 862 C Nonestab
3) H.CUP REF CIA/AMN/2158 PT ISV 1740[60]() Specification : DESIGNER'S REF. NO. CIA/AMN/2158 PT. NO.ISV 1740 C Nonestab
4) PLASTIC POWER PISTON FOR 70 MM 12 BORE[60]() Specification : DRG. NO KF/SK-1747 DATED 04/03/2000 C Nonestab
5) CUP HALF DRG. ARDE/2225 DET.8[60]() Specification : DRG.NO. ARDE/2225 DET.NO.8 DT.30.05.2008 C Nonestab
Category : p
Grade : Grade III
Size : S
4228 M/s ADINATH INDUSTRIES
PLOT NO. 224, SECTOR-7, SIDCUL INDUSTRIAL AREA, HARIDWAR HARIDWAR UTTRAKHAND
PIN1 : 249403
Phone No. : 9810060890
GSTIN : 08AAEFA6033D1ZX 		AAEFA6033D

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) NYLON RING TO DRG. NO. ISX- 426 Description : NYLON RING TO DRG. NO. ISX- 426() Specification : NYLON RING TO DRG. NO. ISX- 426 required for Shell 130mm HE1B P Estab
Category : p
Grade : 2
Size : O
4229 NILKAMAL LIMITED
SURVEY NO. 393, NAROLI-KHARADPADA ROAD, VILLAGE KHARADPADA SILVASSA U.T. OF DADRA & NAGAR HAVELI
PIN1 : 396230
Phone No. : 0226818888 		AABPP7423M

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PLASTIC INDEX DISC-SHOT NO.4() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 R Estab
Category : p
Grade : 2
Size : L
4230 SRINIVASA PAPER CONVERTERS PVT. LTD.
PLOT NO. 76, E BLOCK, IDA AUTONAGAR VISAKHAPATNAM ANDHRA PRADESH
PIN1 : 530024
Phone No. : 9441466862 		VBNS02920B

Download 		1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) INSERT TO DRG.NO.4-24929/3 K33/040 Description : INSERT TO DRG.NO.4-24929/3 K33/040() Specification : DRG.NO.4-24929/3 K33/040 DC NO.36875-A, dt.27.12.02.PART DRG NO.TUBE TO DRG NO. 4-24929/3RK33/017 DC NO.36891-A Dtd.05-04-03,TUBE TO Drg No 4-24929/3RK33 /019 DC No 34147-A Dt.04.06.87 C Estab
2) TUBE PAPER Description : TUBE PAPER() Specification : ISX-185A C Estab
Category : p
Grade : 3
Size : S
4231 M/s VAIBHAV ASSOCIATES, KANPUR
FLAT NO. F-2, BALAJI DHAM, 117/H-1/201, PANDU NAGAR KANPUR UTTAR PRADESH
PIN1 : 208005
Phone No. : 9450938501 		AAWPS8523J

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Polythene Bag SK 9060 A Description : Polythene Bag SK 9060 A() Specification : Polythene Bag SK 9060 A P Estab
Category : p
Grade : 2
Size : O
4232 IMPEX CHEMICAL CORPORATION
7 DEVKARAN MANSION, 24 VITHAL DAS ROAD,PRINCESS STREET, P.B.NO.2399 MUMBAI MAHARASHTRA
PIN1 : 400002
Phone No. : 07612743368 		0000TR4009

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) POTASSIUM NITRATE GR I ITEM CODE 1001621710 Description : POTASSIUM NITRATE GR I ITEM CODE 1001621710() Specification : POTASSIUM NITRATE Gr. I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 (2ND REV.) (REAFFIRMED 2003) DC NO. 3810-ME DT. 5/5/04 R Estab
Category : s
Grade : 3
Size : S
4233 VIKAS METALS
NO.4-4-168, MAHAKALI STREET, RANIGUNJ SECUNDERABAD TELANGA
PIN1 : 500003
Phone No. : 9391055542 		AABHC0919B

Download 		1) Ordnance Factory Medak

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 2 X1250X2500 Description : STEEL SHEET 2 X1250X2500() Specification : STEEL SHEET 2 X1250X2500 to Grade Fe 410 IS:1079-88 R Estab
2) LOW CARBON FERRO MANGANESE Description : LOW CARBON FERRO MANGANESE() Specification : L.C FERRO MANGANESE, GRADE:O2FeMn72 PARTICLE SIZE CLASS:5, AS PER IS: 1171-2011, %MN=70-74; %C=0.20 MAX, %SI=1.0 MAX; %S=0.05 MAX; %P=0.30 MAX; PARTICLE SIZE RANGE: 3.12 TO 25MM. R Estab
Category : s
Grade : 3
Size : S
4234 MICRO METAL CRAFT
22, BIT-STEP MESRA RANCHI JHARKHAND
PIN1 : 835215
Phone No. : 0651-2271190
GSTIN : 20AARFM5599D1Z1 		RCHM02890G

Download 		1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) FUZE PERCUSSION DA NO.117 (EMPTY) MK.20 WITH CAP TO DESIGNERS REF NO.L5/10744/GE/341, PART NO: Description : FUZE PERCUSSION DA NO.117 (EMPTY) MK.20 WITH CAP TO DESIGNERS REF NO.L5/10744/GE/341, PART NO:() Specification : FUZE PERCUSSION DA NO.117 (EMPTY) MK.20 WITH CAP TO DESIGNERS REF NO.L5/10744/GE/341, PART NO: QX-244 GE, DC NO. 31398-A, DT.10.02.75. (REF.DRG.FUZE PERCUSSION DA NO.117 EMPTY MK 20 ITEM LIST FOR QX 244 GE DCI-31398-A DT.10.02.75) C Estab
Category : p
Grade : 3
Size : S
4235 PIK INDIA
PATAUDI ROAD, GURGAON HARYANA
PIN1 : 122001
Phone No. : 9810064841 		AABFP6186B

Download 		1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) Rubber Hose-Assly Description : Rubber Hose-Assly() Specification : AS/ GCF/SIZE/SPECIFICATION C Estab
Category : s
Grade : 3
Size : O
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) HOSE 1T8 60 TO 7052000860 Description : HOSE 1T8 60 TO 7052000860() Specification : TY:005.280(1T8-60) C Estab
2) HOSE TO 7052000885 Description : HOSE TO 7052000885() Specification : TY:005.280(2T8-85) C Estab
3) HOSE 2T 12 15 TO 7052001215 Description : HOSE 2T 12 15 TO 7052001215() Specification : TY:005.280-87(2T12-15) C Estab
4) HOSE TO 7052001615 Description : HOSE TO 7052001615() Specification : TY:005.280-76(2T16-15) C Estab
5) HOSE 2T 20 15 TO 7052002015 Description : HOSE 2T 20 15 TO 7052002015() Specification : TY:005.280(2T20-15) C Estab
6) HOSE 2T 25 15 TO 7052002515 Description : HOSE 2T 25 15 TO 7052002515() Specification : TY:005.280(2T25-15) C Estab
7) HOSE 1T 48 15 TO 7052004815 Description : HOSE 1T 48 15 TO 7052004815() Specification : TY:005.280(48-15) C Estab
8) HOSE TO 7052101807 Description : HOSE TO 7052101807() Specification : TY:005.6016-87(40Y18-7) C Estab
9) HOSE TO 7052102507 Description : HOSE TO 7052102507() Specification : TY:005.6016-87(40Y25-7) C Estab
10) HOSE TO 7052102513 Description : HOSE TO 7052102513() Specification : 40Y25-13 C Estab
11) HOSE 2M 12 15 TO 7052502515 Description : HOSE 2M 12 15 TO 7052502515() Specification : TY:38.005.1515-76 C Estab
Category : p
Grade : 2
Size : S
4236 BHANU ENGINEERING WORKS
17, B.K. MOITRA ROAD, P.O-BARANAGAR P.O-BARANAGAR KOLKATA WEST BENGAL
PIN1 : 700036
Phone No. : 9836859407
GSTIN : 19AEAPB7409L1ZH 		CALA13808E

Download 		1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) SPRING SEAR ASSEMBLY FOR PISTOL AUTO 9MM 1A. Description : SPRING SEAR FOR PISTOL AUTO 9MM 1A.() Specification : As per drawing C Estab
Category : p
Grade : 3
Size : S
1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) Spring Sear Assembly for 9mm Auto Pistol Description : Spring Sear Assembly for 9mm Auto Pistol() Specification : Spring Sear Assembly for 9mm Auto Pistol C Estab
Category : p
Grade : 3
Size : S
4237 ASHOKA MANUFACTURING LTD.,
16,2ND FLOOR, INDIA EXCHANGE PLACE, KOLKATA W.B.
PIN1 : 700001
Phone No. : 033-22902386 		CALA06752F

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BAYONET 1A FOR SMALL ARMS Description : BAYONET 1A FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
2) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
3) SCABBARD BAYONET FOR CARBINE 9MM Description : SCABBARD BAYONET FOR CARBINE 9MM() Specification : SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 C Estab
4) Bayonet No. 5 MK-1 DS CAT No. 1005-000951 Description : Bayonet No. 5 MK-1 DS CAT No. 1005-000951() Specification : AS PER DRG. C Estab
5) TRIGGER ASSY. TO DSCAT NO. 1005-006589 Description : TRIGGER ASSY. TO DSCAT NO. 1005-006589() Specification : AS PER DRG. C Estab
6) Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897 Description : Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897() Specification : AS PER DRG. C Estab
7) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)() Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) C Estab
Category : p
Grade : 3
Size : S
4238 U.S ENTERPRISES
PLOT NO. 488, INDL. AREA, PHASE 9, MOHALI PANJAB
PIN1 : 160059
Phone No. : 09463390516
GSTIN : 03AFFPK3474A1Z0 		AFFPK3474A

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) IGN. ELEMENT,FIRE. BOLT,SAFETY CASE() Specification : DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A R Estab
Category : p
Grade : 3
Size : S
4239 M/s CHOWDHURY PACKAGERS
D-37, MIDC, INDUSTRIAL AREA, NAGPUR NAGPUR MAHARASHTRA
PIN1 : 440028
Phone No. : 9373103457 		AKYPA6267D

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Corr. Paper Board Box Drg. SK-9378/B Description : Corr. Paper Board Box Drg. SK-9378/B() Specification : As per drawing P Estab
Category : p
Grade : 2
Size : S
4240 THORO PACKAGING INDUSTRIES
OFFICE NO. 3, THAKKAR HOUSE, EAST STREET, CAMP PUNE MAHARASHTRA
PIN1 : 411001
Phone No. : 02026123313 		AAAFT6877E

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PIC PKG TOP 460mmx175mmx20mm THICK Description : PIC PKG TOP 460mmx175mmx20mm THICK() Specification : MATERIAL EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KG PER CUBIC METRE. R Estab
2) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 275 MM X 142 MM X 12 MM Description : E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 275 MM X 142 MM X 12 MM() Specification : IS:4671-1984 R Estab
3) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 146 MM X 120 MM X 12 MM Description : E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 146 MM X 120 MM X 12 MM() Specification : IS:4671-1984 R Estab
4) POLYSTRENE FOAM TYPE2, 275X142X6MM Description : POLYSTRENE FOAM TYPE2, 275X142X6MM() Specification : IS:4671-1984 R Estab
5) PIECE PKG. POLYSTRINE 250X170X12MM Description : PIECE PKG. POLYSTRINE 250X170X12MM() Specification : IS:4671_1984 R Estab
6) PIECE PKG. POLYSTERINE 240X110X15 Description : PIECE PKG. POLYSTERINE 240X110X15() Specification : IS:4671_1984 R Estab
Category : p
Grade : 3
Size : S