List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4421 MICRON INDUSTRIES
4, SARDAR PATEL ROAD, 2ND FLOOR DIPLOMATIC ENCLAVE NEW DELHI NEW DELHI
PIN1 : 110021
Phone No. : 9872699944 		AAACM0386Q

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) BOMBLET FUZE DASD ASSY EMPTY AS PER ARDE DRAWING NO 86030409000000000DJ Description : BOMBLET FUZE DASD ASSY EMPTY AS PER ARDE DRAWING NO 86030409000000000DJ() Specification : AS PER ARDE DRAWING NO. 86030409000000000DJ & ARDE QAP C Estab
Category : p
Grade : 1
Size : O
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SAM BODY FOR DPICM WARHEAD AS PER ARDE DRAWING NO 86030310010100100DB Description : SAM BODY FOR DPICM WARHEAD AS PER ARDE DRAWING NO 86030310010100100DB() Specification : As per DRG C Estab
2) SASD ASSEMBLY EMPTY FOR DPCIM WARHEAD AS PER DRAWING NO 86030310010000000DD Description : SASD ASSEMBLY EMPTY FOR DPCIM WARHEAD AS PER DRAWING NO 86030310010000000DD() Specification : As per QAP C Estab
Category : p
Grade : 1
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA A DRG NO 13021 0 0 DC I NO 35218 A DT 13 11 91 WITH CUP BOOSTER Description : BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA A DRG NO 13021 0 0 DC I NO 35218 A DT 13 11 91 WITH CUP BOOSTER() Specification : BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA(A) DRG. NO.13021-0-0.DC(I). NO.35218-A DT.13-11-91. WITH CUP BOOSTER TO CQA(A) DRG.NO.13032-0-0.DC(I). NO.36804-A DT.1-1-02.SPECN. NO. MIL-F-46996 B(MU),AIDEMEMOIRE B/14 AND CQA(A)PROOF C Estab
Category : p
Grade : 1
Size : O
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) COVER TO CQA AMMN DRG. NO. 3-016919 DET 15 DC 37284-A DT 06.07.2011() COVER TO CQA AMMN DRG. NO. 3-016919 DET 15 DC 37284-A DT 06.07.2011 (ITEM CODE- 9912794801 C Estab
Category : p
Grade : 3
Size : M
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) COVER TO CQA AMMN DRG NO 3 016919 DET 15 DC 37284 A DT 06 07 2011 Description : COVER TO CQA AMMN DRG NO 3 016919 DET 15 DC 37284 A DT 06 07 2011() Specification : COVER TO CQA AMMN DRG NO. 3-016919 DET-15 DC 37284-A DT 06.07.2011. R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SAFE AND ARMING DEVICE M9040A1 ASSY OF FUZE PDM9030A1 AS PER OFAJ DRG NO FS2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA Description : SAFE AND ARMING DEVICE M9040A1 ASSY OF FUZE PDM9030A1 AS PER OFAJ DRG NO FS2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA() Specification : SAFE AND ARMING DEVICE M9040A1 ASSY. OF FUZE PDM9030A1 AS PER OFAJ DRG. NO. FS-2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA C Estab
Category : ddp
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) STOP TO CQA A DRAWING NO 6W8 205 504 DC 37271 A DT 08 11 10 Description : STOP TO CQA A DRAWING NO 6W8 205 504 DC 37271 A DT 08 11 10() Specification : STOP TO CQA (A) DRAWING NO. 6W8-205.504 DC 37271-A DT. 08-11-10 C Estab
2) WASHER TO CQA AMMN DRG NO BW 9 440 010 DC 37271 A DT 08 11 10 Description : WASHER TO CQA AMMN DRG NO BW 9 440 010 DC 37271 A DT 08 11 10() Specification : WASHER TO CQA (AMMN.) DRG. NO. BW 9.440. 010 DC 37271-A DT. 08-11-10 C Estab
3) LITTLE CUP TO CQA AMMN DRG NO BW8 635 064 DC 37271 A DT 08 11 10 Description : LITTLE CUP TO CQA AMMN DRG NO BW8 635 064 DC 37271 A DT 08 11 10() Specification : LITTLE CUP TO CQA (AMMN.) DRG. NO.BW8. 635.064 DC 37271-A DT. 08-11-10 C Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) WASHER TO CQA A DRG NO BW 9 440 047 DC 37539 A Description : WASHER TO CQA A DRG NO BW 9 440 047 DC 37539 A() Specification : WASHER TO CQA (A) DRG NO. BW 9.440. 047 DC 37539-A DT. 26-11-2019 C Estab
Category : ddp
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SAFE AND ARMING DEVICE ASSEMBLY EMPTY FOR 155MM ELECTRONIC FUZE Description : SAFE AND ARMING DEVICE ASSEMBLY EMPTY FOR 155MM ELECTRONIC FUZE() Specification : SAFE AND ARMING DEVICE ASSEMBLY (EMPTY) FOR 155MM ELECTRONIC FUZE. C Estab
Category : ddp
Grade : 1
Size : S
1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) CYLINDER Description : CYLINDER() Specification : AS PER DRG. NO. SK-01444 C Estab
Category : s
Grade : 3
Size : S
4422 SEWA ENTERPRISES,
87-E/10, DABAULI, KANPUR U.P.
PIN1 : 208022
Phone No. : 9335036523 		ACQFS6487B

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
Category : p
Grade : 3
Size : S
4423 GK MICROMETALS PVT. LTD
39, INDUSTRIAL AREA, BANMORE DISTT. MORENA (M.P.) MORENA M.P.
PIN1 : 476444
Phone No. : 9425111787 		BPLGO3141F

Download 		1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001017178 POWDER ALUMINIUM HY250 MIC JSS 1370 Description : 1001017178 POWDER ALUMINIUM HY250 MIC JSS 1370() Specification : JSS 1370-03-2007 R Estab
Category : s
Grade : 3
Size : S
1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001017178 POWDER ALUMINIUM HY250 MIC JSS 1370 Description : 1001017178 POWDER ALUMINIUM HY250 MIC JSS 1370() Specification : JSS 1370-03-2007 R Estab
Category : s
Grade : 3
Size : S
4424 D. KHANDELWAL STEEL CORPN.
"OM BUILDING"2ND FLOOR BESIDE UNION BANK OF INDIA,GHAT ROAD NAGPUR MAHARASHTRA
PIN1 : 440018
Phone No. : 9881713477 		ALOPK5011A

Download 		1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133021020 SHEET M S Description : 0133021020 SHEET M S() Specification : SHEET MILD STEEL,SIZE: 2 MM THICK X 1830 MM LONG X 915 WIDE.IS - 1079-1994,GRADE "O" R Estab
2) 0133030114 MS PLATE SIZE 6MM Description : 0133030114 MS PLATE SIZE 6MM() Specification : IS 2062-1994 R Estab
3) 0134071133 SHEET M S 2500 Description : 0134071133 SHEET M S 2500() Specification : IS:513-1994 R Estab
4) 0145060016 SHEET MILD STEEL 1830X915 Description : 0145060016 SHEET MILD STEEL 1830X915() Specification : IS-513-1994 R Estab
Category : s
Grade : 3
Size : S
4425 BHARAT ELECTRONICS LIMITED
JALAHALLI POST, BANGALORE KARNATAKA
PIN1 : 560013
Phone No. : 08028382626
GSTIN : 29AAACB5985C1ZL 		BLRB03693E

Download 		1Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) FOOT FIRING MECHANISM Description : FOOT FIRING MECHANISM() Specification : FOOT FIRING MECHANISM BEL/AS PER DRG./REQUIREMENT C Estab
2) CONTROL PANEL Description : CONTROL PANEL() Specification : AS PER DRG./SPECIFICATION C Estab
3) CABLE BEL Description : CABLE BEL() Specification : AS PER DRG./SPECIFICATION C Estab
4) SENSOR BEL Description : SENSOR BEL() Specification : AS PER DRG./SPECIFICATION C Estab
5) DRIVING CONTROLS Description : DRIVING CONTROLS() Specification : DRIVING CONTROLS BEL/AS PER DRG. C Estab
6) SIGN LIGHTING BEL Description : SIGN LIGHTING BEL() Specification : AS PER DRG./SPECIFICATION C Estab
7) RELAY BEL Description : RELAY BEL() Specification : AS PER DRG./SPECIFICATION C Estab
8) PANEL LIGHTING BEL Description : PANEL LIGHTING BEL() Specification : AS PER DRG./SPECIFICATION C Estab
9) CLIP BEL Description : CLIP BEL() Specification : AS PER DRG./SPECIFICATION C Estab
10) HOSE CONNECTION BEL Description : HOSE CONNECTION BEL() Specification : AS PER DRG./SPECIFICATION C Estab
11) SUPPLY OF ELECTRONIC SUIT Description : SUPPLY OF ELECTRONIC SUIT() Specification : AS PER DRG./SPECIFICATION C Estab
12) NFV CAMERA TO BEL Description : NFV CAMERA TO BEL() Specification : AS PER DRG./SPECIFICATION C Estab
13) SIGHT CONTROL BOX BEL Description : SIGHT CONTROL BOX BEL() Specification : AS PER DRG./SPECIFICATION C Estab
Category : ddp
Grade : 1
Size : L
4426 M/s Crown Rubber Products, Pune
CROWN RUBBER PRODUCTS, J-221, MIDC, BHOSARI, PUNE 411026. PUNE MAHARASTRA
PIN1 : 411026
Phone No. : 9657860521 		AAVPP4930B

Download 		1Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) O Ring 191*5.4 As Per Drg No. 86030201090000300PA 01 Description : O Ring 191*5.4 As Per Drg No. 86030201090000300PA 01() Specification : O Ring 191*5.4 As Per Drg No. 86030201090000300PA C Estab
2) O Ring 171.7*5.3 As Per Drg No. 86030201030000200PA 01 Description : O Ring 171.7*5.3 As Per Drg No. 86030201030000200PA 01() Specification : O Ring 171.7*5.3 As Per Drg No. 86030201030000200PA C Estab
3) O Ring 133*4 As Per Drg No. 86030201120000300PA 01 Description : O Ring 133*4 As Per Drg No. 86030201120000300PA 01() Specification : O Ring 133*4 As Per Drg No. 86030201120000300PA C Estab
4) O Ring 188*5.4 As Per Drg No. 86030201090000300PA 01 Description : O Ring 188*5.4 As Per Drg No. 86030201090000300PA 01() Specification : O Ring 188*5.4 As Per Drg No. 86030201090000300PA C Estab
Category : p
Grade : 2
Size : S
4427 NEELESH ENGINEERS
SECTOR 7, PLOT-86, PCNTDA, BHOSARI, PUNE-411026 PUNE MAHARASHTRA
PIN1 : 411026
Phone No. : 020-30787831 		ABJPP1674P

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) THREAD RING GAUGES Description : THREAD RING GAUGES() Specification : M340 X 3-66 GO NO GO THREAD GAUGE E Estab
2) SCREW Description : SCREW() Specification : SCREW RING GO GAUGE FOR TRAPOZIDE E Estab
3) GAUGES Description : GAUGES() Specification : THREAD PLUG GAUGES GO NO GO TR 225 E Estab
4) TOOLS Description : TOOLS() Specification : MEASURING TOOL FOR MAGAZINE COVER E Estab
5) All types of extruded Rubber profiles i.e. Beadings, Channels, Sections, Tubes etc Description : All types of extruded Rubber profiles i.e. Beadings, Channels, Sections, Tubes etc() Specification : THREAD PROFILE E Estab
6) ALLOY STEELS/S.S. COMPONENTS Description : ALLOY STEELS/S.S. COMPONENTS() Specification : STANDARD COMPONENTS FOR T-90 C Estab
7) LOCK DRG.NO.2A26-02-128 Description : LOCK DRG.NO.2A26-02-128() Specification : LOCK AXLE ETC REQUIRED FOR T-72/T-90 C Estab
8) HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS) Description : HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS)() Specification : SPLINE MILLING IN MACHINING INPUT S Estab
Category : s
Grade : 3
Size : S
4428 SHRI GANESH ENTERPRISES
E-350 BARRA-8 KANPUR UTTAR PRADESH
PIN1 : 208027
Phone No. : 98390998332 		AQJPG6819Q

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) DETENT STUD COCKING SLIDE for MAG Description : DETENT STUD COCKING SLIDE for MAG() Specification : DETENT STUD COCKING SLIDE TO DS CAT NO. 5307-004452 DC(I) NO. 27020-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
2) ROLLER FOR MAG Description : ROLLER FOR MAG() Specification : DRG NO. 1005-000559 DC(I) NO. 25307-SA DT-26/03/2002 IN FINISHED CONDITION.AS PER DRG. C Estab
3) 10. BUFFER PLATE Description : 10. BUFFER PLATE() Specification : DS CAT NO. 1005-000573 C Estab
4) TRIGGER PIN DS CAT NO.5315 - 001538 DC(I) NO. 25365-SA DT0 16.05.2002 Description : TRIGGER PIN DS CAT NO.5315 - 001538 DC(I) NO. 25365-SA DT0 16.05.2002() Specification : TRIGGER PIN DS CAT NO.5315 - 001538 DC(I) NO. 25365-SA DT0 16.05.2002 C Estab
5) RIVET COCKING HANDLE GUIDE FOR MAG Description : RIVET COCKING HANDLE GUIDE FOR MAG() Specification : RIVET, COCKING HANDLE GUIDE PART NO. 025T (DS CAT.NO. 5320-002938 DC(I) 27016-SA DT. 19.01.17) C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) DETENT STUD COCKING SLIDE for MAG Description : DETENT STUD COCKING SLIDE for MAG() Specification : DETENT STUD COCKING SLIDE TO DS CAT NO. 5307-004452 DC(I) NO. 27020-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
2) ROLLER FOR MAG Description : ROLLER FOR MAG() Specification : DRG NO. 1005-000559 DC(I) NO. 25307-SA DT-26/03/2002 IN FINISHED CONDITION.AS PER DRG. C Estab
3) 10. BUFFER PLATE Description : 10. BUFFER PLATE() Specification : DS CAT NO. 1005-000573 C Estab
4) TRIGGER PIN DS CAT NO.5315 - 001538 DC(I) NO. 25365-SA DT0 16.05.2002 Description : TRIGGER PIN DS CAT NO.5315 - 001538 DC(I) NO. 25365-SA DT0 16.05.2002() Specification : TRIGGER PIN DS CAT NO.5315 - 001538 DC(I) NO. 25365-SA DT0 16.05.2002 C Estab
5) RIVET COCKING HANDLE GUIDE FOR MAG Description : RIVET COCKING HANDLE GUIDE FOR MAG() Specification : RIVET, COCKING HANDLE GUIDE PART NO. 025T (DS CAT.NO. 5320-002938 DC(I) 27016-SA DT. 19.01.17) C Estab
Category : p
Grade : 3
Size : S
4429 CHOKSEY CHEMICALS PVT LTD
111 Industrial Area Next to croma showroom Sion GTB Station road mumbai Maharashtra
PIN1 : 400022
Phone No. : 49100100
GSTIN : 27AAACC6303K1ZT 		MUMC1104IC

Download 		1Opto Electronic Factory

Name Specification Use Status
1) SEALANT YT-32 AS PER SPCN NO. TY:38.105.462-80 (LF-9927076729)[99]() Specification : TY:38.105.462-80 R Estab
Category : p
Grade : Grade III
Size : S
4430 KALIMATI CARBON PVT. LTD.
10C, MIDDLETON ROW, 7TH FLOOR KOLKATA WEST BENGAL
PIN1 : 700071
Phone No. : 033-22640043 		CALK08664F

Download 		1Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) ACTIVATED CARBON (CHARCOAL) Description : ACTIVATED CARBON (CHARCOAL)() Specification : ACTIVATED CARBON,COLUMN SIZE: 8-25 BSS P Estab
Category : p
Grade : 3
Size : S
4431 RAHUL ENTERPRISES
3605, FCA GALI NO 10, S.G.M. NAGAR, FARIDABAD S.G.M. NAGAR FARIDABAD HARYANA
PIN1 : 121001
Phone No. : 9818189156 		ABBPP0541M

Download 		1Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) DIE CASTING OF TRIGGER HOUSING FOR 12 BORE MOD PUMP ACTION GUN Description : DIE CASTING OF TRIGGER HOUSING FOR 12 BORE MOD PUMP ACTION GUN() Specification : DIE CASTING OF TRIGGER HOUSING FOR 12 BORE MOD. PAG. R Estab
Category : p
Grade : 3
Size : S
4432 NATIONAL INDUSTRIES
123/54 SARESH BAGH KANPUR U.P.
PIN1 : 208012
Phone No. : 7860037121 		AAAMPD7969

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4433 STARLINE INDUSTRIES
10, CLIVE ROW, 2ND FLOOR, ROOM NO. 6/3 KOLKATA W.B.
PIN1 : 700001
Phone No. : 05122217225 		PA3271C1Z0

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
2) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
3) WALLET EMPTY FOR SMALL ARMS Description : WALLET EMPTY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
4) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
5) TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10 Description : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10() Specification : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10 C Estab
6) Tool Cleaning Gas Block Drg No. AKC-02, Description : Tool Cleaning Gas Block Drg No. AKC-02,() Specification : AS PER DRG. C Estab
7) PIVOT BUTT TO DS CAT NO 1005 000879 IN FINISHED CONDITION FOR CARBINE 9MM Description : PIVOT BUTT TO DS CAT NO 1005 000879 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : PIVOT BUTT TO DS/CAT NO.1005-000879 IN FINISHED CONDITION.DC(I) NO. 26883-SA DT.04.07.16. C Estab
8) ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 Description : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001() Specification : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 C Estab
9) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
10) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
11) BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 Description : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99() Specification : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 C Estab
12) Nut Extractor DRG. No. PH-4-2 Description : Nut Extractor DRG. No. PH-4-2() Specification : As per Drg. C Estab
13) PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 Description : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99() Specification : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 C Estab
14) PIN, CATCH REAR SIGHT TO DS CAT NO. 5315-001507 DC(I) NO. 26203-SA DT-20.05.06 IN FINISHED CONDITION. Description : PIN, CATCH REAR SIGHT TO DS CAT NO. 5315-001507 DC(I) NO. 26203-SA DT-20.05.06 IN FINISHED CONDITION.() Specification : PIN, CATCH REAR SIGHT TO DS CAT NO. 5315-001507 DC(I) NO. 26203-SA DT-20.05.06 IN FINISHED CONDITION. C Estab
15) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
16) SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION Description : SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION() Specification : SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97 C Estab
17) SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 Description : SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08() Specification : SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 C Estab
18) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
19) SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19 C Estab
20) Plunger in Finished Condn.PH 1-24 Description : Plunger in Finished Condn.PH 1-24() Specification : As Per Drg. C Estab
21) SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER Description : SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW PLUNGER TO DRG NO.PH-1-26 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
22) SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Description : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04() Specification : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
23) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
24) PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99 Description : PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99() Specification : PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99 C Estab
25) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
26) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
27) CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION. Description : CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.() Specification : CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4434 ELOQUENT ENGG. WORKS
204, GANJ PETH, MOMINPURA, CHOTTI MASJID PUNE MAHARASHTRA
PIN1 : 411042
Phone No. : 912026456756 		ACQPS5725G

Download 		1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) ALUMINIUM STRIP 0.46+0.04MM-0.05MM X34.3MM() Specification : IS 737-2008 (4TH REVISION) GRADE 19000 R Estab
2) SRIR (EMPTY) (TYPE E, C & H) TO DRG.NO. NASK 990/1 (PROV)() Specification : DRG.NO. NASK 990/1 (PROV) DT. 07.09.2011 R Estab
3) CONTACT TO DRG.ARDE 2078/31.27.8.87() Specification : ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 2O. R Estab
Category : p
Grade : 3
Size : S
4435 THEIS PRECISION STEEL INDIA PRIVATE LIMITED
OPP:GIDC, N.H.NO.8, P.O: KABILPORE, NAVSARI N.H.NO.8 NAVSARI GUJARAT
PIN1 : 396424
Phone No. : 09227949744 		SRTT00997D

Download 		1Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) HOUSING BODY OF GHAATAK AND INSAS Description : HOUSING BODY OF GHAATAK AND INSAS() Specification : STEEL STRIP 1.8MM +_.055X 270MM +_ 0.2 WIDTH TO SPCN.IS:7226 -1974, GRADE C40 SPCL. CONTROL/TREATMENT TO SUIT REQUIRED SILICON/ALUMINIUM KILLED WITH ALUMINIUM CONTENT 0.01%(MAX).DEPTH OF DECARBURISATION WITHIN 3% ON THICKNESS/SIDES SPHER- R Estab
Category : p
Grade : 3
Size : L
4436 SRI KONARK INDUSTRIES
H.NO. 5-5-35/100, IST FLOOR, PRASHANTH NAGAR,KUKATPALLY, HYDERABAD- 500072 ANDHRA PRADESH
PIN1 : 500072
Phone No. : 9505458485 		ACUPP4392G

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BARREL BLANK AS PER DRG. NO. SK-01394 Description : BARREL BLANK AS PER DRG. NO. SK-01394() Specification : AS PER SPECIFICATION/REQUIREMENT C Estab
2) HAMMER TO DRG. NO. 32-0601 MK-III Description : HAMMER TO DRG. NO. 32-0601 MK-III() Specification : HAMMER TO DRG. NO. 32-0601 MK-III,MATERIAL BS 970 PT I 1983 GD:070 M-55(B.S 970 EN-9) ALT.MATERIAL: FROM I.C ROUTE I.C DRG NO.SK-5377R BS 3146 Pt.1-1974. TYPE CLASS-12 Gr.A. C Estab
Category : s
Grade : 3
Size : S
4437 S.S.M. BROTHERS LTD.,
POST BOX No. 8, 11-D, GANDHIPURAM MAIN ROAD, KOMARAPALAYAM, NAMAKKAL, TAMIL NADU
PIN1 : 638183
Phone No. : 04288-260815 		AACCS9495C

Download 		1Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CAMBRIC COTTON DYED & UNDYED Description : CAMBRIC COTTON DYED & UNDYED() Specification : IS 5088-1982 (REV.1) WITH AMENDMENT No. 2 REAFFIRMED 2011 DC 3999-ME DT.08-01-2010 (VARIETY No. 2) R Estab
2) THREAD SEWING UNBLEACHED Description : THREAD SEWING UNBLEACHED() Specification : THREAD COTTON SEWING UNBLEACHED UNPROOFED 27 TEX X 9 (COPS OF 1000 MTRS. JSS:8310-02 2016 REVISION NO.3 DC 5497-ME DT.24.09.2016 R Estab
3) WHITE COLOUR COTTON DOWN TIGHT Description : WHITE COLOUR COTTON DOWN TIGHT() Specification : CLOTH COTTON DOWN TIGHT (WHITE COLOUR) SPECN :IND/ME/1005 october 2012 DC - 5105 ME 27/04/2013 WIDTH : 1400 MM. R Estab
4) CALICO BAGS 40 KG Description : CALICO BAGS 40 KG() Specification : BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2017-FOR CLOTH R Estab
5) TAPE COTTON WHITE Description : TAPE COTTON WHITE() Specification : TAPE COTTON WHITE UN-PROOFED FOR AMMUNITION PURPOSES 6 MM + OR -1.5MM WIDE SPECN:IND/ME/888:2015 DC-5405(ME) DT.01.02.2016 R Estab
6) CORD RAYON Description : CORD RAYON() Specification : CORD RAYON WITH BREAKING LOAD 343 N SPECIFICATION :IND/ME/761(B) DC 3754-ME DT.12.12.2002 R Estab
7) TAPE COTTON WHITE 30 MM Description : TAPE COTTON WHITE 30 MM() Specification : TAPE COTTON MEDIUM UNPROOFED SPECN : IND/ME/888:2015 DC 5405-ME DT.01-02-16 (COLOURWHITE , WIDTH : 30MM) R Estab
Category : dp
Grade : 3
Size : S
4438 KAMAL INDUSTRIAL CORPORATION
PLOT -W-15 CHEMICAL ZONE MIDC INDUSTRIAL AREA AMBARNATH WEST THANE MAHARASHTRA
PIN1 : 421501
Phone No. : 02512611525 		PNESO9189F

Download 		1Ordnance Factory Katni

[ENR Registration]
Name Specification Use Status
1) PHOSPHER COPPER MASTER ALLOY Description : PHOSPHER COPPER MASTER ALLOY() Specification : PHOSPHER COPPER MASTER ALLOY 14% SPECN 1S:5743-1991 ALLOY DESIGNATION CU.P-14 IN THE FORM OF NOTCHED INGOTS PACKED IN WOODEN CRATES WEIGHING NOT MORE THAN 50 KG MARKING ON INGOTS STRICTLY AS PER IS 5743 CLAUSE 7.2 CHECK ANALYSIS FOR EVERY R Estab
Category : s
Grade : 3
Size : S
4439 NARENDRA EXPLOSIVES LIMITED
59, GANDHI ROAD DEHRADUN UTTARAKHAND
PIN1 : 248001
Phone No. : 0135-2727279
GSTIN : 09AABCN6341D1ZO 		DELN06963F

Download 		1Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) CONTAINER WITH DISC CLOSING TO DRG.NO.ARDE-1935 Description : CONTAINER WITH DISC CLOSING TO DRG.NO.ARDE-1935() Specification : CONTAINER WITH DISC CLOSING TO DRG.NO.ARDE-1935, DET NO.1 PART NO.ITV 28A SHEET-1 TO DC.36747-A DT. 09-03-2001, SHEET-2 DC-35684-A DT.06-04-94 TO SPECN. CQA(A)2303(f) C Estab
2) SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART Description : SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART() Specification : SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART NO.IQX-831, DC NO. 36785, DT.08.10.2001 [FOR PRIMER 18A] C Estab
Category : p
Grade : 3
Size : S
4440 STARLINE INDUSTRIES,
10, CLIVE ROW, 2ND FLOOR, ROOM NO.6/3, KOLKATA-700 001. 2ND FLOOR, ROOM NO. 6/3 KOLKATA WEST BENGAL
PIN1 : 700001
Phone No. : 033-22428712 		ACVPA3271C

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BUSH STUD HAMMER Description : BUSH STUD HAMMER() Specification : FGK DRG. NO. PH-5-3 C Estab
2) Lever Cam Description : Lever Cam() Specification : As per FGK Drg. 32-0103 C Estab
3) NUT EXTRACTOR Description : NUT EXTRACTOR() Specification : FGK DRG. NO. PH -4-2 C Estab
4) AXIS CYLINDER Description : AXIS CYLINDER() Specification : PIN AXIS CYLINDER AS PER FGK DRG. NO. 32-0303 C Estab
5) PIN CATCH TRIGGER Description : PIN CATCH TRIGGER() Specification : FGK DRG. NO. PH-7-3 C Estab
6) PIN CATCH PIN SWIVEL HAMMER Description : PIN CATCH PIN SWIVEL HAMMER() Specification : FGK DRG. NO. PH -6-5 C Estab
7) PIN EXTRACTOR Description : PIN EXTRACTOR() Specification : FGK DRG. NO. PH-10-2 C Estab
8) PIN FIXING BARREL Description : PIN FIXING BARREL() Specification : FGK DRG. NO. 32-0109 C Estab
9) SCREW CAM Description : SCREW CAM() Specification : FGK DRG. NO. PH-1/28 C Estab
10) SCREW CATCH BARREL Description : SCREW CATCH BARREL() Specification : FGK DRG. NO. SK-01470 C Estab
11) SCREW FIXING LEVER CAM Description : SCREW FIXING LEVER CAM() Specification : FGK DRG. NO. PH -1-20 C Estab
12) SCREW PIN FIXING BARREL Description : SCREW PIN FIXING BARREL() Specification : AS PER DRG. NO. 32-0117 C Estab
13) SCREW PLATE BODY Description : SCREW PLATE BODY() Specification : FGK DRG. NO. PH-1-19/32-0119 C Estab
14) SCREW PLUNGER Description : SCREW PLUNGER() Specification : FGK DRG. NO. PH-1-26 C Estab
15) SCREW SHIELD Description : SCREW SHIELD() Specification : FGK DRG. NO. PH-1-16 C Estab
16) SCREW STOCK Description : SCREW STOCK() Specification : FGK DRG. NO. PH -1-15 C Estab
17) STUD STOP CYLINDER Description : STUD STOP CYLINDER() Specification : FGK DRG. NO. PH PH-2-2 C Estab
18) SWIVEL BUTT SUB ASSEMBLY Description : SWIVEL BUTT SUB ASSEMBLY() Specification : AS PER DRG. NO. 32-1100 C Estab
Category : s
Grade : 3
Size : S

Copyright © 2025 - OFB