List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4441 ROHANINDIA
30/A,LAXMINARAYAN ROAD, DUM DUM CANTONMENT, P.O ROBINDRANAGAR. LAXMINARAYAN ROAD KOLKATA West Bengal
PIN1 : 700065
Phone No. : 7003920053
GSTIN : 19AEWPM2043P1ZO 		AEWPM2043P

Download 		1Heavy Vehicle Factory

Name Specification Use Status
1) ROLLER SUPPORT TO 6206203018[62]() Specification : ROLLER SUPPORT TO DRG NO. 175.18.005CB C Nonestab
Category :
Grade : Grade III
Size : SS
1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BRONZE FORGING FOR SHELL & SAFETY ARM Description : BRONZE FORGING FOR SHELL & SAFETY ARM() Specification : SAFETY ARM 155 MM DRG. NO. 4077842 C Estab
2) MACHINING Description : MACHINING() Specification : FINISH MACHINING OF STOP C Estab
3) HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS) Description : HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS)() Specification : H.S.S.(MM-42) SPECIAL DOVETAIL CUTTER S Estab
4) PHOSPHER BRONZE, GUN METAL, TIN BRONGE TO ALL STANDARD SPECIFICATION IN THE FORM OF ROUND, SQUARE, R Description : PHOSPHER BRONZE, GUN METAL, TIN BRONGE TO ALL STANDARD SPECIFICATION IN THE FORM OF ROUND, SQUARE, R() Specification : PHOSPHER BRONZE SIZE: 45 MM SQUARE R Estab
5) COVER & PLATE Description : COVER & PLATE() Specification : PLATE TO SIZE 380 X 40 MM IN LENGTH C Estab
Category : s
Grade : 3
Size : S
4442 G S ENGINEERING WORKS
MIG 145 DABOULI WEST DABOULI WEST KANPUR Uttar Pradesh
PIN1 : 208022
Phone No. : 9839120792
GSTIN : 09AXJPK2111L1ZG 		AXJPK2111L

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LOCKING HAND GUARD FOR JVPC Description : PIN LOCKING HAND GUARD FOR JVPC() Specification : PIN LOCKING HAND GUARD FOR JVPC 5.56MM DRG.NO.0204 03-02-00-13-001-00DB C Estab
Category : ddp
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN TRIGGER HAMMER AND SEAR SAFETY for JVPC Description : PIN TRIGGER HAMMER AND SEAR SAFETY for JVPC() Specification : PIN TRIGGER, HAMMER AND SEAR SAFETY DRG.NO. 0204-03-02-02-18 -003-00DA. C Estab
Category : ddp
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIVOT COVER SLIDE GUIDE ROLLER FOR MAG Description : PIVOT COVER SLIDE GUIDE ROLLER FOR MAG() Specification : DS CAT NO. 1005-000460 DC(NO.) 25298-SA DT-19.3.2002 IN FINISHED CONDITION. C Estab
Category : ddp
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : REAR END OUTER TUBE RETURN SPRINGPART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
Category : ddp
Grade : 3
Size : S
1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Catch Hammer Description : Catch Hammer() Specification : Rev Comp.Drg. No.- SK-01289 C Estab
2) CATCH TRIGGER Description : CATCH TRIGGER() Specification : DRG NO 32-070 C Estab
3) LEVER EXTRACTOR Description : LEVER EXTRACTOR() Specification : FGK DRG. NO. PH-1-7 C Estab
4) Spring Catch Barrel Description : Spring Catch Barrel() Specification : As per FGK Drg. PH.1-7/FGK 32-0112 C Estab
Category : s
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING. Description : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.() Specification : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR INSAS 5.56 MM Description : PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR INSAS 5.56 MM() Specification : ARDE SK 2689/132 C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) RIVET GUIDE UPPER FOR MAG Description : RIVET GUIDE UPPER FOR MAG() Specification : RIVET GUIDE UPPER TO DS CAT NO. 5320 - 000953 DC(I) NO. 27014-SA DT- 16.01.17 IN FINISHED CONDITION. C Estab
2) RIVET DRG. NO.SKM 876F MAG7.62 Description : RIVET DRG. NO.SKM 876F MAG7.62() Specification : RIVET, COCKING H GUIDE & LOCKING SHOULDER TO DRG NO. SKM 876FFOR COCKING H/GUIDE & LOCKING SHOULDER C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Rivet Drg No SKM 876A Description : Rivet Drg No SKM 876A() Specification : SKM 876A C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PLATEFORM ASSEMBLY FOR CARBINE 9MM Description : PLATEFORM ASSEMBLY FOR CARBINE 9MM() Specification : PLATEFORM ASSEMBLY OF 9MM MAGAZINE IN FINISHED CONDITION DS CAT NO 1005-000978 DC(1) 25694-SA DT 08-03-2003 (COMPONENT ARE (1)ROLLER (2) PIN (3)GUIDE SPRING (4) PLATE- -FORM (5)PLATEFORM EXTENSION C Estab
2) PIN LOCKING TRIGGER MECH-9MM Description : PIN LOCKING TRIGGER MECH-9MM() Specification : PIN LOCKING TRIGGER MECH.D S CAT NO 1005-000904 9MM CARBINE FINISHED CONDITION (ICR NO 1080) DC NO. 26896-SA DT. 18/07/2016 C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION. Description : EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION.() Specification : EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4443 SRI KONARK INDUSTRIES
H.NO. 5-5-35/100, IST FLOOR, PRASHANTH NAGAR,KUKATPALLY, HYDERABAD- 500072 ANDHRA PRADESH
PIN1 : 500072
Phone No. : 9505458485 		ACUPP4392G

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BARREL BLANK AS PER DRG. NO. SK-01394 Description : BARREL BLANK AS PER DRG. NO. SK-01394() Specification : AS PER SPECIFICATION/REQUIREMENT C Estab
2) HAMMER TO DRG. NO. 32-0601 MK-III Description : HAMMER TO DRG. NO. 32-0601 MK-III() Specification : HAMMER TO DRG. NO. 32-0601 MK-III,MATERIAL BS 970 PT I 1983 GD:070 M-55(B.S 970 EN-9) ALT.MATERIAL: FROM I.C ROUTE I.C DRG NO.SK-5377R BS 3146 Pt.1-1974. TYPE CLASS-12 Gr.A. C Estab
Category : s
Grade : 3
Size : S
4444 NATIONAL INDUSTRIES
123/54 SARESH BAGH KANPUR U.P.
PIN1 : 208012
Phone No. : 7860037121 		AAAMPD7969

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4445 S.S.M. BROTHERS LTD.,
POST BOX No. 8, 11-D, GANDHIPURAM MAIN ROAD, KOMARAPALAYAM, NAMAKKAL, TAMIL NADU
PIN1 : 638183
Phone No. : 04288-260815 		AACCS9495C

Download 		1Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CAMBRIC COTTON DYED & UNDYED Description : CAMBRIC COTTON DYED & UNDYED() Specification : IS 5088-1982 (REV.1) WITH AMENDMENT No. 2 REAFFIRMED 2011 DC 3999-ME DT.08-01-2010 (VARIETY No. 2) R Estab
2) THREAD SEWING UNBLEACHED Description : THREAD SEWING UNBLEACHED() Specification : THREAD COTTON SEWING UNBLEACHED UNPROOFED 27 TEX X 9 (COPS OF 1000 MTRS. JSS:8310-02 2016 REVISION NO.3 DC 5497-ME DT.24.09.2016 R Estab
3) WHITE COLOUR COTTON DOWN TIGHT Description : WHITE COLOUR COTTON DOWN TIGHT() Specification : CLOTH COTTON DOWN TIGHT (WHITE COLOUR) SPECN :IND/ME/1005 october 2012 DC - 5105 ME 27/04/2013 WIDTH : 1400 MM. R Estab
4) CALICO BAGS 40 KG Description : CALICO BAGS 40 KG() Specification : BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2017-FOR CLOTH R Estab
5) TAPE COTTON WHITE Description : TAPE COTTON WHITE() Specification : TAPE COTTON WHITE UN-PROOFED FOR AMMUNITION PURPOSES 6 MM + OR -1.5MM WIDE SPECN:IND/ME/888:2015 DC-5405(ME) DT.01.02.2016 R Estab
6) CORD RAYON Description : CORD RAYON() Specification : CORD RAYON WITH BREAKING LOAD 343 N SPECIFICATION :IND/ME/761(B) DC 3754-ME DT.12.12.2002 R Estab
7) TAPE COTTON WHITE 30 MM Description : TAPE COTTON WHITE 30 MM() Specification : TAPE COTTON MEDIUM UNPROOFED SPECN : IND/ME/888:2015 DC 5405-ME DT.01-02-16 (COLOURWHITE , WIDTH : 30MM) R Estab
Category : dp
Grade : 3
Size : S
4446 KAMAL INDUSTRIAL CORPORATION
PLOT -W-15 CHEMICAL ZONE MIDC INDUSTRIAL AREA AMBARNATH WEST THANE MAHARASHTRA
PIN1 : 421501
Phone No. : 02512611525 		PNESO9189F

Download 		1Ordnance Factory Katni

[ENR Registration]
Name Specification Use Status
1) PHOSPHER COPPER MASTER ALLOY Description : PHOSPHER COPPER MASTER ALLOY() Specification : PHOSPHER COPPER MASTER ALLOY 14% SPECN 1S:5743-1991 ALLOY DESIGNATION CU.P-14 IN THE FORM OF NOTCHED INGOTS PACKED IN WOODEN CRATES WEIGHING NOT MORE THAN 50 KG MARKING ON INGOTS STRICTLY AS PER IS 5743 CLAUSE 7.2 CHECK ANALYSIS FOR EVERY R Estab
Category : s
Grade : 3
Size : S
4447 STARLINE INDUSTRIES
10, CLIVE ROW, 2ND FLOOR, ROOM NO. 6/3 KOLKATA W.B.
PIN1 : 700001
Phone No. : 05122217225 		PA3271C1Z0

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
2) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
3) WALLET EMPTY FOR SMALL ARMS Description : WALLET EMPTY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
4) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
5) TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10 Description : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10() Specification : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10 C Estab
6) Tool Cleaning Gas Block Drg No. AKC-02, Description : Tool Cleaning Gas Block Drg No. AKC-02,() Specification : AS PER DRG. C Estab
7) PIVOT BUTT TO DS CAT NO 1005 000879 IN FINISHED CONDITION FOR CARBINE 9MM Description : PIVOT BUTT TO DS CAT NO 1005 000879 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : PIVOT BUTT TO DS/CAT NO.1005-000879 IN FINISHED CONDITION.DC(I) NO. 26883-SA DT.04.07.16. C Estab
8) ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 Description : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001() Specification : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 C Estab
9) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
10) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
11) BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 Description : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99() Specification : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 C Estab
12) Nut Extractor DRG. No. PH-4-2 Description : Nut Extractor DRG. No. PH-4-2() Specification : As per Drg. C Estab
13) PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 Description : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99() Specification : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 C Estab
14) PIN, CATCH REAR SIGHT TO DS CAT NO. 5315-001507 DC(I) NO. 26203-SA DT-20.05.06 IN FINISHED CONDITION. Description : PIN, CATCH REAR SIGHT TO DS CAT NO. 5315-001507 DC(I) NO. 26203-SA DT-20.05.06 IN FINISHED CONDITION.() Specification : PIN, CATCH REAR SIGHT TO DS CAT NO. 5315-001507 DC(I) NO. 26203-SA DT-20.05.06 IN FINISHED CONDITION. C Estab
15) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
16) SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION Description : SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION() Specification : SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97 C Estab
17) SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 Description : SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08() Specification : SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 C Estab
18) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
19) SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19 C Estab
20) Plunger in Finished Condn.PH 1-24 Description : Plunger in Finished Condn.PH 1-24() Specification : As Per Drg. C Estab
21) SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER Description : SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW PLUNGER TO DRG NO.PH-1-26 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
22) SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Description : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04() Specification : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
23) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
24) PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99 Description : PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99() Specification : PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99 C Estab
25) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
26) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
27) CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION. Description : CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.() Specification : CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4448 UNIVERSAL TRADING COMPANY
72/1, SISIR BHADURI SARANI, KOLKATA WEST BENGAL
PIN1 : 700006
Phone No. : 03323503445 		AABFU4518J

Download 		1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) PACKING BOX CO 180 A FOR FUZE MINE COMBINATION Description : PACKING BOX CO 180 A FOR FUZE MINE COMBINATION() Specification : AS PER DRG. P Estab
2) PACKING BO CO 261 Description : PACKING BO CO 261() Specification : PACKING BOX CO 261 P Estab
3) PACKING BOX CO 262 3 A IN FC Description : PACKING BOX CO 262 3 A IN FC() Specification : AS PER DRG P Estab
4) PACKING BOX TO DRG. NO. CO-63/2 FOR PRIMER 18A & 13A Description : PACKING BOX TO DRG. NO. CO-63/2 FOR PRIMER 18A() Specification : PACKING BOX TO DRG. NO. CO-63/2 FOR PRIMER 18A & 13A P Estab
5) WOODEN PACKING BOX 1000 X 425 X 225 MM DRG CO 456 Description : WOODEN PACKING BOX 1000 X 425 X 225 MM DRG CO 456() Specification : AS PER DRG. P Estab
6) WOODEN PACKING BOX CO 480 Description : WOODEN PACKING BOX CO 480() Specification : AS PER DRG. P Estab
7) PACKING BOX DRG NO CO 326 IN F C Description : PACKING BOX DRG NO CO 326 IN F C() Specification : PACKING BOX DRG NO CO- 326 IN F/C P Estab
8) PACKING BOX GSF SK NO CO 338 Description : PACKING BOX GSF SK NO CO 338() Specification : PACKING BOX GSF SK NO CO-338 P Estab
9) PACKING BOX GSF SK NO CO 339 Description : PACKING BOX GSF SK NO CO 339() Specification : PACKING BOX GSF SK NO CO-339 P Estab
10) INTERNAL FITTING FOR PACKING BOX CO 386 1 ITEM 3 Description : INTERNAL FITTING FOR PACKING BOX CO 386 1 ITEM 3() Specification : INTERNAL FITTING FOR PACKING BOX CO-386/1 (ITEM-3) P Estab
11) INTERNAL FITTING FOR PACKING BOX CO 386 1 ITEM 4 Description : INTERNAL FITTING FOR PACKING BOX CO 386 1 ITEM 4() Specification : INTERNAL FITTING FOR PACKING BOX CO-386/1 (ITEM-4) P Estab
12) INTERNAL FITTING FOR PACKING BOX CO 386 1 ITEM ID Description : INTERNAL FITTING FOR PACKING BOX CO 386 1 ITEM ID() Specification : INTERNAL FITTING FOR PACKING BOX CO-386/1 (ITEM-ID) P Estab
13) PACKING BOX CO 134 Description : PACKING BOX CO 134() Specification : PACKING BOX CO-134 P Estab
14) PACKING BOX CO 135 FOR DA FUZE 162 MK 9 Description : PACKING BOX CO 135 FOR DA FUZE 162 MK 9() Specification : AS PER DRG. P Estab
15) PACKING BOX FOR PRIMER ELECTRIC 1A L EMPTY CO 226 Description : PACKING BOX FOR PRIMER ELECTRIC 1A L EMPTY CO 226() Specification : PACKING BOX FOR PRIMER ELECTRIC 1A/L EMPTY(CO-226) P Estab
16) PACKING BOX CO 271 Description : PACKING BOX CO 271() Specification : AS PER DRG. P Estab
17) PACKING BOX CO 427 FOR PROJECTOR GRENADE FOR 7 POINT 62 Description : PACKING BOX CO 427 FOR PROJECTOR GRENADE FOR 7 POINT 62() Specification : PACKING BOX (CO-427) FOR PROJECTOR GRENADE FOR 7.62 P Estab
18) PACKING BOX GSF DRG NO CO 435 Description : PACKING BOX GSF DRG NO CO 435() Specification : AS PER DRG. P Estab
19) PACKING BOX GSF DRG. NO. CO-438 Description : PACKING BOX GSF DRG. NO. CO-438A() Specification : PACKING BOX GSF DRG. NO. CO-438 P Estab
20) PACKING BOX GSF DRG NO CO 100 1 Description : PACKING BOX GSF DRG NO CO 100 1() Specification : PACKING BOX GSF DRG NO CO-100/1 P Estab
21) WOODEN PACKING BOX DRG NO CO 454 A Description : WOODEN PACKING BOX DRG NO CO 454 A() Specification : AS PER DRG. P Estab
22) WOODEN PACKING BOX (TRANSIT) TO DRG. NO. CO-445A F/C Description : WOODEN PACKING BOX (TRANSIT) TO DRG. NO. CO-445A F/C() Specification : AS PER DRAWING P Estab
23) WOODEN PACKING BOX TO DRG NO CO 393 IN F C Description : WOODEN PACKING BOX TO DRG NO CO 393 IN F C() Specification : WOODEN PACKING BOX TO DRG NO CO-393 IN F/C P Estab
24) WOODEN PACKING BOX (TRANSIT) TO DRG. NO. CO-433/B IN F/C Description : WOODEN PACKING BOX (TRANSIT) TO DRG. NO. CO-433/B IN F/C() Specification : DRG NO CO-433/B FOR 84MM RL MK-II P Estab
25) WOODEN PACKING BOX TO DRG NO CO 459 A F C Description : WOODEN PACKING BOX TO DRG NO CO 459 A F C() Specification : WOODEN PACKING BOX TO DRG NO CO-459 A F/C P Estab
26) WOODEN PACKING BOX TO DRG NO CO 461 A IN F C Description : WOODEN PACKING BOX TO DRG NO CO 461 A IN F C() Specification : WOODEN PACKING BOX TO DRG NO CO-461 A IN F C P Estab
27) PACKING BOX no co 292 1 Description : PACKING BOX no co 292 1() Specification : AS PER DRG. P Estab
28) WOODEN TRAY TO DRG NO CO 368 ITEM NO 8 Description : WOODEN TRAY TO DRG NO CO 368 ITEM NO 8() Specification : WOODEN TRAY TO DRG. NO. CO-368 ITEM NO-8 P Estab
29) WOODEN PACKING BOX CO 374 B Description : WOODEN PACKING BOX CO 374 B() Specification : WOODEN PACKING BOX NO. CO-374 B (760X610X63) P Estab
30) INTERNAL FITTING CO 292 2 Description : INTERNAL FITTING CO 292 2() Specification : AS PER DRG. P Estab
31) INTERNAL FITTING TRAY GSF DRG NO CO 435 Description : INTERNAL FITTING TRAY GSF DRG NO CO 435() Specification : INTERNAL FITTING (TRAY) GSF DRG NO CO-435 P Estab
32) SUPPORT CO 428 A Description : SUPPORT CO 428 A() Specification : SUPPORT (ITEM NO 9) AS PER GSF DRG NO CO-428 A P Estab
33) INTERNAL FITTING CO 476 Description : INTERNAL FITTING CO 476() Specification : AS PER DRG. P Estab
34) INTERNAL FITTING CO 454 A Description : INTERNAL FITTING CO 454 A() Specification : AS PER DRG. P Estab
35) INTERNAL FITTING 180 A Description : INTERNAL FITTING 180 A() Specification : AS PER DRG. P Estab
36) SUPPORT FOR PACKING BOX CO 454 A ITEM NO 9 Description : SUPPORT FOR PACKING BOX CO 454 A ITEM NO 9() Specification : AS PER DRG. P Estab
37) INTERNAL FITTING OF CO 326 Description : INTERNAL FITTING OF CO 326() Specification : AS PER DRG. P Estab
38) TIMBER MANGO 2255050105 Description : TIMBER MANGO 2255050105() Specification : TIMBER MANGO 76.2MM X 15.875MM X 1.524MTRS & ABOVE P Estab
39) TIMBER MANGO 2255050125 Description : TIMBER MANGO 2255050125() Specification : TIMBER MANGO 76.2MM X 12.7MM X 1.524MTRS & ABOVE P Estab
40) TIMBER MANGO 2255561325 Description : TIMBER MANGO 2255561325() Specification : TIMBER MANGO SIZE 228.6 MM X 12.7 MM X 1.524 MTRS P Estab
41) WOODEN TRAY TO DRG NO M 3834 2 Description : WOODEN TRAY TO DRG NO M 3834 2() Specification : WOODEN TRAY TO DRG NO M-3834/2 P Estab
Category : p
Grade : 3
Size : S
4449 UNITED BLEACHERS (P) LIMITED
POST BOX No. 12, NELLITHURAI ROAD, METTUPALAYAM, COIMBATORE DISTRICT, TAMIL NADU
PIN1 : 641301
Phone No. : 04254-222914 		AAACU3750G

Download 		1Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CAMBRIC COTTON DYED & UNDYED Description : CAMBRIC COTTON DYED & UNDYED() Specification : IS 5088-1982 (FIRST REVISION) WITH AMENDMENT No. 2 REAFFIRMED 2011 DC 3999-ME Dt.08-01-2010 (VARIETY No. 2) R Estab
Category : p
Grade : 3
Size : S
4450 STARLINE INDUSTRIES,
10, CLIVE ROW, 2ND FLOOR, ROOM NO.6/3, KOLKATA-700 001. 2ND FLOOR, ROOM NO. 6/3 KOLKATA WEST BENGAL
PIN1 : 700001
Phone No. : 033-22428712 		ACVPA3271C

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BUSH STUD HAMMER Description : BUSH STUD HAMMER() Specification : FGK DRG. NO. PH-5-3 C Estab
2) Lever Cam Description : Lever Cam() Specification : As per FGK Drg. 32-0103 C Estab
3) NUT EXTRACTOR Description : NUT EXTRACTOR() Specification : FGK DRG. NO. PH -4-2 C Estab
4) AXIS CYLINDER Description : AXIS CYLINDER() Specification : PIN AXIS CYLINDER AS PER FGK DRG. NO. 32-0303 C Estab
5) PIN CATCH TRIGGER Description : PIN CATCH TRIGGER() Specification : FGK DRG. NO. PH-7-3 C Estab
6) PIN CATCH PIN SWIVEL HAMMER Description : PIN CATCH PIN SWIVEL HAMMER() Specification : FGK DRG. NO. PH -6-5 C Estab
7) PIN EXTRACTOR Description : PIN EXTRACTOR() Specification : FGK DRG. NO. PH-10-2 C Estab
8) PIN FIXING BARREL Description : PIN FIXING BARREL() Specification : FGK DRG. NO. 32-0109 C Estab
9) SCREW CAM Description : SCREW CAM() Specification : FGK DRG. NO. PH-1/28 C Estab
10) SCREW CATCH BARREL Description : SCREW CATCH BARREL() Specification : FGK DRG. NO. SK-01470 C Estab
11) SCREW FIXING LEVER CAM Description : SCREW FIXING LEVER CAM() Specification : FGK DRG. NO. PH -1-20 C Estab
12) SCREW PIN FIXING BARREL Description : SCREW PIN FIXING BARREL() Specification : AS PER DRG. NO. 32-0117 C Estab
13) SCREW PLATE BODY Description : SCREW PLATE BODY() Specification : FGK DRG. NO. PH-1-19/32-0119 C Estab
14) SCREW PLUNGER Description : SCREW PLUNGER() Specification : FGK DRG. NO. PH-1-26 C Estab
15) SCREW SHIELD Description : SCREW SHIELD() Specification : FGK DRG. NO. PH-1-16 C Estab
16) SCREW STOCK Description : SCREW STOCK() Specification : FGK DRG. NO. PH -1-15 C Estab
17) STUD STOP CYLINDER Description : STUD STOP CYLINDER() Specification : FGK DRG. NO. PH PH-2-2 C Estab
18) SWIVEL BUTT SUB ASSEMBLY Description : SWIVEL BUTT SUB ASSEMBLY() Specification : AS PER DRG. NO. 32-1100 C Estab
Category : s
Grade : 3
Size : S
4451 NARENDRA EXPLOSIVES LIMITED
59, GANDHI ROAD DEHRADUN UTTARAKHAND
PIN1 : 248001
Phone No. : 0135-2727279
GSTIN : 09AABCN6341D1ZO 		DELN06963F

Download 		1Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) CONTAINER WITH DISC CLOSING TO DRG.NO.ARDE-1935 Description : CONTAINER WITH DISC CLOSING TO DRG.NO.ARDE-1935() Specification : CONTAINER WITH DISC CLOSING TO DRG.NO.ARDE-1935, DET NO.1 PART NO.ITV 28A SHEET-1 TO DC.36747-A DT. 09-03-2001, SHEET-2 DC-35684-A DT.06-04-94 TO SPECN. CQA(A)2303(f) C Estab
2) SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART Description : SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART() Specification : SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART NO.IQX-831, DC NO. 36785, DT.08.10.2001 [FOR PRIMER 18A] C Estab
Category : p
Grade : 3
Size : S
4452 SABOO TEXTILES
OLD BHANDARA ROAD, ITWARI NAGPUR MAHARASHTRA
PIN1 : 440002
Phone No. : 9823148756
GSTIN : 27ABJPS2565E1ZG 		NGPM07274B

Download 		1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) CUTTING & STITCHING OF BAGS M4A2 Description : CUTTING & STITCHING OF BAGS M4A2() Specification : CUTTING & STITCHING OF CHARGE BAGS FOR M4A2 AS PER DRG.NO- 12882-2-0 TO 12884-2-0,12885-1-0,12886-0-0,12887-0-0,12888-1 -0,12890-2-0,NO 12909-0-0 , 12910-0-0,14776-0-0 TO 14778-0- 0,13976-0-0,12891-0-0,12899-0-0,12905-0-0. MATERIAL WILL R Estab
2) BLANKET COTTON DOSUTI WHITE STICHED AROUND SIZE 1.5X0.8 Description : BLANKET COTTON DOSUTI WHITE STICHED AROUND SIZE 1.5X0.8() Specification : BLANKET COTTON DOSUTI WHITE STITCHED AROUND OF SIZE- 1.5 X 0.8 METER. AS PER SPECIFICATION NO- IS:179-2009 (THIRD REVISION). R Estab
Category : p
Grade : 3
Size : S
4453 JOSPAL INDUSTRIES
D-153, TTC INDUSTRIAL AREA, MIDC, SHIRAWANE NAVI MUMBAI MAHARASHTRA
PIN1 : 400705
Phone No. : 02225782222 		MUMJO1854G

Download 		1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) AMMN.CONTAINER BOX B-9 A() Specification : IA 1169 R Estab
2) BOX H 50 MK1 LA DRG NO DDL 18867() Specification : BOX AMMUNITION S.A.H 50, MK 1/LA, STEEL DRG. NO. DD(L) 18867 PART NO. SV 140 A, DC 36493-A. SPECN: IA 1169 (n), DC 35576A. PAINTED WITH PAINT R F U MATT FINISH, OLIVE GREEN, ISC:220 OF IS: 5-1994(AMENDMENT NO.1) TO SPECN IS: 168-1993 R Estab
3) CYLINDER NO 274 MK1 SER() Specification : IA 1163 R Estab
4) BOX NO.428 MK.1() Specification : DRG. NO. D.D.(L) 18704 R Estab
5) CYLINDER NO 80 A MK() Specification : IA-1163 R Estab
6) AMMUNITION CONT.CYL.NO 309 MK-2() Specification : IA 1163 R Estab
Category : p
Grade : 3
Size : S
4454 SHIV SHANKARLAL SHIVSARANLAL
31/128 GHUMNI BAZAR KANPUR U P
PIN1 : 208001
Phone No. : 9839123019 		PG9987J1ZF

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ENGINEERS SCREW DRIVER Description : ENGINEERS SCREW DRIVER() Specification : ENGINEERS SCREW DRIVER 1.6 X 6.5 X 150 IS:844 PT-II,MAKE-TAPARIA/JHALLNI ONLY S Estab
Category : s
Grade : 3
Size : S
4455 KRISHNA SAW MILL
4, SETT PUKUR ROAD, KOLKATA WEST BENGAL
PIN1 : 700002
Phone No. : 9830352063 		CALKO8525G

Download 		1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) WOODEN BEAM SIZE 100 MM X 150 MM X 1000 MM Description : WOODEN BEAM SIZE 100 MM X 150 MM X 1000 MM() Specification : WOODEN BEAM ( SIZE 100 MM X 150 MM X 1000 MM / TYPE : SAL) P Estab
2) WOODEN BEAM Description : WOODEN BEAM() Specification : WOODEN BEAM (SIZE:100 MM X 180MM X2050 MM) P Estab
3) WOODEN BEAM SIZE 180MM X 180 MM X500 MM Description : WOODEN BEAM SIZE 180MM X 180 MM X500 MM() Specification : WOODEN BEAM (SIZE: 180MM X 180 MM X500 MM / TYPE : SAL) P Estab
Category : p
Grade : 2
Size : S
4456 STEEL ARTS(INDIA) PVT.LTD.
23/F-12 JAGAI PURWA, NEAR SURSA MANDIR,KANPUR-208007 KANPUR UTTAR PRADESH
PIN1 : 208007
Phone No. : 9793020055
GSTIN : 09AAECS8638P1ZF 		AAECS8638P

Download 		1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) ALIGNMENT BRACKET Description : ALIGNMENT BRACKET() Specification : AS PER DRG. NO. SK-00868 C Estab
2) AXIS CYLINDER NIRBHEEK Description : AXIS CYLINDER NIRBHEEK() Specification : AXIS CYLINDER NIRBHEEK C Estab
3) AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302 Description : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302() Specification : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302(IN FINISH C SPECN BS 970 PT.1:1983 GRADE 080 M40 C Estab
4) BARREL BLANK AS PER DRG. NO. SK-01394 Description : BARREL BLANK AS PER DRG. NO. SK-01394() Specification : AS PER SPECIFICATION/REQUIREMENT C Estab
5) BUSHING Description : BUSHING() Specification : AS PER DRG.NO. 115-000208 C Estab
6) Cam Cylinder Description : Cam Cylinder() Specification : Rev Comp.Drg. No.-32-0104 C Estab
7) Catch Hammer Description : Catch Hammer() Specification : Rev Comp.Drg. No.- SK-01289 C Estab
8) COVER & PLATE Description : COVER & PLATE() Specification : AS PER DRG. NO. 1015-004616 C Estab
9) CYLINDER Description : CYLINDER() Specification : AS PER DRG. NO. SK-01444 C Estab
10) CYLINDER SUB ASSY DRG.NO.32-0400. ALONGWITH ASSY.COMPONENTS DRG.NO.32-0401 Description : CYLINDER SUB ASSY DRG.NO.32-0400. ALONGWITH ASSY.COMPONENTS DRG.NO.32-0401() Specification : PROVIDE"TEST PIECE AS PER RELEVENT I.S.FOR MECH. TEST AT FGK C Estab
11) Extractor Description : Extractor() Specification : As per FGK Drg.32-1001 C Estab
12) MACHINING Description : MACHINING() Specification : FINISH MACHINING OF EYE BOLT/SCREW C Estab
13) HAMMER TO DRG. NO. 32-0601 MK-III Description : HAMMER TO DRG. NO. 32-0601 MK-III() Specification : HAMMER TO DRG. NO. 32-0601 MK-III,MATERIAL BS 970 PT I 1983 GD:070 M-55(B.S 970 EN-9) ALT.MATERIAL: FROM I.C ROUTE I.C DRG NO.SK-5377R BS 3146 Pt.1-1974. TYPE CLASS-12 Gr.A. C Estab
14) LEVER EXTRACTOR Description : LEVER EXTRACTOR() Specification : FGK DRG. NO. PH-1-7 C Estab
15) LOCKING PLATE 1481M X Description : LOCKING PLATE 1481M X() Specification : LOCKING PLATE AS PER DS CAT NO. 5310-022970 C Estab
16) PAWL Description : PAWL() Specification : DRG NO 32-0102 C Estab
17) PIN CATCH TRIGGER Description : PIN CATCH TRIGGER() Specification : FGK DRG. NO. PH-7-3 C Estab
18) PIN CATCH HAMMER/PIN SWIVEL HAMMER Description : PIN CATCH HAMMER/PIN SWIVEL HAMMER() Specification : AS PER DRG.NO.PH-6-5 C Estab
19) PLATE BODY TO DRG. NO. 32-0501 MK-III Description : PLATE BODY TO DRG. NO. 32-0501 MK-III() Specification : PLATE BODY TO DRG. NO. 32-0501 MK-III MATERIAL:-BS 970 Pt.1: 1983 Gd. 070 M-55 (BS 970 EN-9), FINISH:-ELECTROSTATIC POWDER COATING AFTER ASSY. ALT MATERIAL FROM IC ROUTE:-BS 3146 PT.1 1974 TYPE CLASS-8. C Estab
20) PLUNGER Description : PLUNGER() Specification : FGK DRG. NO. ILG-153 C Estab
21) REBOUND SLIDE Description : REBOUND SLIDE() Specification : AS PER DRG.NO. 32-0122 MK-III C Estab
22) REBOUND TRIGGER Description : REBOUND TRIGGER() Specification : AS PER DRG. NO. 32-0132 MK-III C Estab
23) RETAINING PIN, FEED Description : RETAINING PIN, FEED() Specification : RETAINER HELICAL C Estab
24) SEMI FINISHED BARREL Description : SEMI FINISHED BARREL() Specification : AS PER DRG. NO. 01445 C Estab
25) Shield Description : Shield() Specification : Rev Comp.Drg. No.- SK-01287 C Estab
26) STOP CYLINDER Description : STOP CYLINDER() Specification : DRG NO 32-011 C Estab
27) SWIVEL BUTT SUB ASSEMBLY Description : SWIVEL BUTT SUB ASSEMBLY() Specification : AS PER DRG. NO. 32-1100 C Estab
28) TRIGGER TO DRG. NO. 32-0701 MK-III Description : TRIGGER TO DRG. NO. 32-0701 MK-III() Specification : TRIGGER TO DRG. NO. 32-0701 MK-III ALT VERSION 2 MATERIAL: BS 970 Pt.1: 1983 GD. 070 M-55 (BS 970 EN-9)/ALT.MTL.(I.C.)BS3146 PT.-1,1974 TYPE CLASS-8 ALT. MATERIAL FOR MIM COMPONENTS:MIM 4650. C:0.3-0.6%, NI:1.5-2.5%,Cr-0.5% MAX.,Si-0.5%, C Estab
29) WASHER Description : WASHER() Specification : WASHER LOCK AS PER DRG.NO. 5310-001470 C Estab
Category : s
Grade : 3
Size : S
4457 UNIVERSAL TIMBER CORPORATION
RAILWAY STATION JAGADHRI N.R., YAMUNA NAGAR, HARYANA
PIN1 : 135001
Phone No. : 01732-261509 		AAAFU1970B

Download 		1Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) UNIT LOAD FOR CH 8 AND 9 Description : UNIT LOAD FOR CH 8 AND 9() Specification : UNIT LOAD FOR 155 MM CHARGE 8 & 9 TO BOFORS DRG.No.4085565 AND 4085566 AND AS PER CFA DRG.No.13 S 002 INCORPORATING THE SUGGESTIONS OF CQA(A), KADKI, VIDE THEIR LETTER No.QA 17553/GEN/VIII DATED 30/03/1995. R Estab
Category : p
Grade : 3
Size : S
4458 DADA DHARAMNATH TIMBER CO. PVT. LTD
F-27 MIDC INDUSTRIAL AREA HINGN ROAD NAGPUR MAHARASHTRA
PIN1 : 440016
Phone No. : 8007774016 		AAACD8616Q

Download 		1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) BOX STEEL NO 1 MK-1 FOR TU TB 250 Description : BOX STEEL NO 1 MK-1 FOR TU TB 250() Specification : DRG NO ARDE 9501-05 C Estab
2) SSTEEL CONTAINER TO TU 1111 Description : SSTEEL CONTAINER TO TU 1111() Specification : DRG NO. ARM 1519 C Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) BOX STEEL NO 1 MK-1 FOR TU TB 250 Description : BOX STEEL NO 1 MK-1 FOR TU TB 250() Specification : DRG NO ARDE 9501-05 C Estab
2) SSTEEL CONTAINER TO TU 1111 Description : SSTEEL CONTAINER TO TU 1111() Specification : DRG NO. ARM 1519 C Estab
Category : dp
Grade : 3
Size : S
4459 SANGEETA INDUSTRIES
NA , B W INDUSTRIAL COMPLEX 179/24 BADU ROAD, DEGBERIA NORTH 24 PARGANAS WEST BENGAL
PIN1 : 700128
Phone No. : 9830174781 		AVWPA9298C

Download 		1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) VARIOUS PLASTIC CRATES,POLYTHENE BAG Description : VARIOUS PLASTIC CRATES,POLYTHENE BAG() Specification : DIFFERENT SIZE AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) VARIOUS PLASTIC CRATES,POLYTHENE BAG Description : VARIOUS PLASTIC CRATES,POLYTHENE BAG() Specification : DIFFERENT SIZE AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) VARIOUS PLASTIC CRATES,POLYTHENE BAG Description : VARIOUS PLASTIC CRATES,POLYTHENE BAG() Specification : DIFFERENT SIZE AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) VARIOUS PLASTIC CRATES,POLYTHENE BAG Description : VARIOUS PLASTIC CRATES,POLYTHENE BAG() Specification : DIFFERENT SIZE AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) VARIOUS PLASTIC CRATES,POLYTHENE BAG Description : VARIOUS PLASTIC CRATES,POLYTHENE BAG() Specification : DIFFERENT SIZE AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
4460 SHIVAM TIMBER
BARGI HILLS SAHANALA, TILWARA ROAD, JABALPUR MADHAYA PRADESH
PIN1 : 482002
Phone No. : 9424734000
GSTIN : 23AADHA6268F1ZL 		AADHA6268F

Download 		1Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) TIMBER PLANKS Description : TIMBER PLANKS() Specification : AS PER REQUIREMENT/SPECIFICATION R Estab
Category : s
Grade : 3
Size : O

Copyright © 2025 - OFB