1) HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF & COUNTER STIFFNER (OEM is M/s Flexituff Ventures International Ltd., New Delhi)()
Specification : AS PER APPENDIX'E'&'F'OF IND/TC/3838(K)
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Equipment Factory
[ENR Registration]
Name
Specification
Use
Status
1) HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF & COUNTER STIFFNER
Description : HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF & COUNTER STIFFNER()
Specification : AS PER APPENDIX "E' & 'F' OF IND/TC/3838 (K)
R
Estab
Category : s
Grade : 3
Size :
O
1Ordnance Equipment Factory
[ENR Registration]
Name
Specification
Use
Status
1) HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER
Description : HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER()
Specification : AS PER APPENDIX ‘E’ & ‘F’ OF IND/TC/3838(K)
R
Estab
Category : s
Grade : 1
Size :
O
1Ordnance Equipment Factory
[ENR Registration]
Name
Specification
Use
Status
1) HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER
Description : HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER()
Specification : AS PER APPENDIX ‘E’ & ‘F’ OF IND/TC/3838(K)
Specification : BLADE FORESIGHT DRG NO-PHMK-IV-3-1-3 IN FINISHED CONDITIONREQUIRED FOR REVOLVER MK-IV,
C
Estab
4) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES
Description : TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES()
Specification :
R
Estab
2) PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16.
Description : PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16.()
Specification : PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16.
Specification : BLADE FORESIGHT DRG NO-PHMK-IV-3-1-3 IN FINISHED CONDITIONREQUIRED FOR REVOLVER MK-IV,
C
Estab
4) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
Specification : COPPER TUBE O/D 46.8 (+/-)0.20MM X I/D 40.3 (+/-)0.10MM IN STRAIGHT LENGTH OF 1.5 Mtr. TO 3 Mtr. TO SPECN- JSS-4710-01-2007 (REV NO.4)GRADE-I
Specification : COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION.
R
Estab
3) BRASS ROD 11 MM BS:2874 CZ122 H (0712200012)
Description : BRASS ROD 11 MM BS:2874 CZ122 H (0712200012)()
Specification : BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H
R
Estab
4) BRASS ROD 6.35MM IS:319 GRD.1 HB (0711904006)
Description : BRASS ROD 6.35MM IS:319 GRD.1 HB (0711904006)()
Specification : BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.
R
Estab
5) BRASS ROD 8.5 MM IS:4170 CU ZN 40 (0711906010)
Description : BRASS ROD 8.5 MM IS:4170 CU ZN 40 (0711906010)()
Specification : BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.
R
Estab
6) BRASS ROD 9.5MM OD IS-319-89 GR-2 (0712100010)
Description : BRASS ROD 9.5MM OD IS-319-89 GR-2 (0712100010)()
Specification : BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".
R
Estab
7) BRASS ROD 29 MM BS2874 CZ122 M LF 0712200029
Description : BRASS ROD 29 MM BS2874 CZ122 M LF 0712200029()
Specification : BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION.
R
Estab
8) BRASS ROD 4MM BSEN12166 CUZN35PB2 (0717501004)
Description : BRASS ROD 4MM BSEN12166 CUZN35PB2 (0717501004)()
Specification : BRASS ROD 4 +/-0.05 MM DIA IN ST. LENGTH OF 2 METERS MIN.TO SPECN.BS EN 12166:2011 DESIGN.CuZn35Pb2 MATERIAL CONDITIONR540 WITH UTS=54-65 Kgf/MM2 & ELONGATION=5% MIN
R
Estab
9) BRASS ROD 14MM BS2874 CZ122 "M" (0717703904)
Description : BRASS ROD 14MM BS2874 CZ122 "M" (0717703904)()
Specification : BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
R
Estab
2) MINE APM CONSISTING OF BODY,SPOOL()
Specification : CQA(A) 1804
R
Estab
Category : p
Grade : 3
Size :
S
4566
ELECTRONICS CORPORATION OF INDIA LIMITED
ECIL P.O. HYDRABAD HYDRABAD ANDHRA PRADESH
PIN1 : 500062
Phone No. : 04027125909
1) STEEL ROD 22 23 MM DIA GR SS D 24 LF 0113000022
Description : STEEL ROD 22 23 MM DIA GR SS D 24 LF 0113000022()
Specification : GR SS D 24
R
Estab
2) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)
Description : STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK
R
Estab
3) STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032)
Description : STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032)()
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Estab
4) STEEL ROD 32MM DIA GOST-V-10230-75 (0184108032)
Description : STEEL ROD 32MM DIA GOST-V-10230-75 (0184108032)()
Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE
R
Estab
5) STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)
Description : STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)()
Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2004)1st REV)GRADE 14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2003)1s
R
Estab
6) STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)
Description : STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Estab
7) STEEL ROD 20 64 mm BS 970 EN 3 LF 0352001901
Description : STEEL ROD 20 64 mm BS 970 EN 3 LF 0352001901()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
2) LINK HOLDING END FOR BOX H2A[07]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Estab
3) BOLT & CUP FOR PRB DRUM[07]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
4) CATCH FOR BOX SM 171K, 651J, 642[07]()
Specification : AS PER DRG./SPECIFICATION
C
Nonestab
5) BRACKET MIDDLE FOR BOX C-51A AND C52A[07]()
Specification : BRACKET MIDDLE FOR BOX C-51A & BOX C-52A
AS PER DRG.NO.OFB/C/1363,DET-12 & OFB/C/1364,DET-10
REF.DRG.NO.ISV-2033 DC 36629-A DATED 06/01/2000.
1) ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT 1105 TO DRG NO IMPD0993 WASHER DIA 11 POINT 5 TO DRG NO IMPD0994 HEX NUT M 10 TO DRG NO IMPD0995 AND LOCK NUT M10 FOR SR NO 1 TO DRG IMPD 0996[00]()
Specification : ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT-1105 TO DRG NO. IMPD0993, WASHER DIA 11.5 TO DRG. NO.IMPD0994, HEX NUT M-10 TO DRG. NO. IMPD0995 AND LOCK NUT M10 FOR SR. NO. 1 TO DRG. IMPD 0996.
1) INDUCTION HARDENING OF SECTOR 675 54 190
Description : INDUCTION HARDENING OF SECTOR 675 54 190()
Specification : INDUCTION HARDENING OF SECTOR DRG No. 675- 54-190
C
Estab
2) INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438
Description : INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438()
Specification : INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438 [ FOR FIRST TIME PROCUREMENT FIRM SHOULD DO TRIAL, TESTING OF FIRST SHIELD BY CUTTING/SECTIONING OF FIRST INDUCTION HARDENING SHIELD, PREPARING TEST PIECE AND HARDNESS TES
C
Estab
Category : p
Grade : 3
Size :
M
4575
VIJAYA TRADING CORPORATION
SR. NO 54, 2A/2B, SHOP NO 4, YASHASHREE PARK APARTMENT, NEAR MAIN BUS STOP, HINGANE, KAVENAGAR PUNE MAHARASHTRA
PIN1 : 411052
Phone No. : 9423157589
1) INTERNAL FITMENTS FOR BOX M-41A
Description : INTERNAL FITMENTS FOR BOX M-41A()
Specification : INTERNAL FITMENTS FOR BOX M-41A TO DESIGNER'S REF.CQA(A)/AMN/3306 PART NO ISV 302 SA DC-37127-A DT.30.07.07(EACH SET CONSIST OF(1) TOP & BOTTOM PIECE TO PART NO ISV-2112 DC-36995 A DT.13.01.05=2 NOS (2) SIDE PIECES(BIG) TO PART NO ISV 211
C
Estab
2) DISC FOR FUZE 162 MARK-8 & DA5A
Description : DISC FOR FUZE 162 MARK-8 & DA5A()
Specification : CQA(A)/AMMN/3042 DET.3 PART NO.ISV-2018. DC-36449-A Dt.30-07-98.
C
Estab
3) DISC POLYTHENE FOAM AVERAGE DENSITY 20 TO 30
Description : DISC POLYTHENE FOAM AVERAGE DENSITY 20 TO 30()
Specification : DISC POLYTHENE FOAM AVERAGE DENSITY 20 TO 30 KG/METER CUBE OD 55x6MM THICK.
C
Estab
4) DISC POLYTHENE FOAM OF AVERAGE DENSITY 20
Description : DISC POLYTHENE FOAM OF AVERAGE DENSITY 20()
Specification : DISC POLYTHENE FOAM OF AVERAGE DENSITY 20 TO 30KG/METER CUBE OD-55MM x 3MM THICK.
1) BUFFER ASSY TO DS CAT NO 1015 001482 FOR 81 MM LIGHT MORTAR IN FC[70]()
Specification : AS PER DRAWING
C
Nonestab
2) LEG LEFT ASSY TO DS CAT NO 1015 001548 FOR MOUNTING ASSY OF 81MM MORTAR IN FC[70]()
Specification : AS PER DRAWING
C
Nonestab
3) MOUNTING GENERAL ASSY FOR 81 MM MORTAR TO DS CAT NO 1015 001480 PART NO AMG 72895 1 AND SHT 2 IN FC[70]()
Specification : AS PER DRAWINGS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) C1054 SLIDER FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
2) SUPPORT TO DRG NO C1062 WITH FIRM MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
3) MANUFACTURING AND SUPPLY OF STOPPER IN FULLY FINISHED CONDITION TO DRG NO C2018 DS CAT NO 4730 007336 THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL[70]()
Specification : As per TE
C
Nonestab
4) C3028 STOP FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
5) C1097 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
1) BODY COVER WITH INTEGRAL PICATINY RAIL FOR LMG BELT FED[70]()
Specification : BODY COVER WITH INTEGRAL PICATINY RAIL LMG 7.62MM BELT FED AS PER DRG. NO. ARDE/SK/108/005
C
Nonestab
2) TRIGGER ASSEMBLY TO DS CAT NO 1005 006589[70]()
Specification : TRIGGER ASSEMBLY TO DS CAT NO 1005 006589 DC(1) NO 26375 SA DT 05/09/07 WITH DETAILS OF LATEST ISSUE INSPECTION TO BE GOVERN BY RELEVANT CLAUSES OF SPECN JSS-1005-04 2006 OF LATE ST ISSUE and ANY OTHER ACCEPTANCE CRITERIA TO BE PROVIDED B
C
Nonestab
3) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]()
Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*
C
Nonestab
4) BLOCK GAS IN FINISH CONDITION FOR MAG[70]()
Specification : BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)
C
Nonestab
5) Receiver Body for 9X19 mm Machine Pistol[70]()
Specification : Receiver Body for 9X19 mm Machine Pistol as per Drawing
C
Nonestab
6) FEED TRAY INTEGRATED FOR LMG BELT FED[70]()
Specification : FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
C
Nonestab
7) FEED MECHANISM and COVER ASSEMBLY REQUIRED FOR LMG BELT FED[70]()
Specification : FEED MECHANISM & COVER ASSEMBLY AS PER DRG.NO.1804 01 04 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
C
Nonestab
8) RECEIVER FOR LMG BELT FED[70]()
Specification : RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED
C
Nonestab
9) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
10) BIPOD ASSEMBLY FOR GPMG MMG EXPORT[70]()
Specification : BIPOD ASSEMBLY FOR GPMG 7.62X51MM/MMG(EXPORT) DRG. NO. SK-MMGU-6326
C
Nonestab
11) RECEIVER FOR GPMG WITHOUT HEATTREATMENT[70]()
Specification : RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG. NO. SK-GPMG-6258
1) CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER Description : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER()
Specification : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.
C
Estab
Category : p
Grade : 2
Size :
S
1Ordnance Factory Dehradun
[ENR Registration]
Name
Specification
Use
Status
1) CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER Description : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER()
Specification : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.
C
Estab
Category : p
Grade : 2
Size :
S
1Ordnance Factory Dehradun
[ENR Registration]
Name
Specification
Use
Status
1) CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER Description : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER()
Specification : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.
C
Estab
Category : p
Grade : 2
Size :
S
4580
ASHA ENTERPRISES
439/17 MS NAICKER FOURTH STREET, GRAMA NEDUM SALAI, SOLINGANALLUR, CHENNAI TAMIL NADU
PIN1 : 600119
Phone No. : 9962545995 GSTIN :
33AEGPT3047N1Z5
