1) PAINT PRIMING REDOXIDE ZINC CHROME AMMN AIR DRYING MATT FINISH BRUSHING or SPRAYING
Description : PAINT PRIMING REDOXIDE ZINC CHROME AMMN AIR DRYING MATT FINISH BRUSHING or SPRAYING()
2) READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004
Description : READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004()
Specification : READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004
E
Estab
3) APC 221 AS PER SPECIFICATION 1011704021
Description : APC 221 AS PER SPECIFICATION 1011704021()
Specification : APC 221 to Specn JSS 8010-28:2015(Rev-No.3) OR
Specn JSS 8010-68:2014(Rev.No.3) Paint Ready Mixed Priming Red Oxide Zinc Chrome, Ammn., Air drying Matt Finish, Brushing/Spraying.
E
Estab
4) PAINT RFU BLACK ACID PROOF
Description : PAINT RFU BLACK ACID PROOF()
Specification : BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING30
Specification : BRASS STRIP 20+/-0.50 MM WIDE X 0.497+/- 0.020 MM THICK IN COIL OF 8 METERS MINIMUM. TO SPECN:-BS-2870-1980, CZ-102,HALF HARD, HARDNESS 100-115 VPN
Specification : BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.
Specification : BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO
R
Estab
5) BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345)
Description : BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345)()
Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
Specification : BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN
Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
Specification : BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120
R
Estab
11) BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132)
Description : BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132)()
Specification : BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM.
R
Estab
12) BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159)
Description : BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159)()
Specification : BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
Specification : COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV.
Specification : BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(REVISION NO.3) HARDNESS 135-155 HV IN THEFORM OF COIL OF 60MM INT.DIA.
Specification : BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED).
Specification : BRASS STRIP 70+/-0.8 MM WIDE x 2.29+/-0.05 MMTHICK IN LENGTHOF 3 METERS IN COILS TO SPECN.JSS-9535-02-2008 REVISON NO.3IN ANNEALED COND.
R
Estab
19) BRASS STRIP 25.4X0.63 MM (0717560949)
Description : BRASS STRIP 25.4X0.63 MM (0717560949)()
Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1
Specification : BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981.
1) STEEL ROUND TO SPECN IS 7283 1992 WITH PROPERTIES AS PER SPECN IS 2062 2006 AND SIZE 115 MM DIA
Description : STEEL ROUND TO SPECN IS 7283 1992 WITH PROPERTIES AS PER SPECN IS 2062 2006 AND SIZE 115 MM DIA()
Specification : STEEL ROUND TO SPECN. IS:7283-1992 WITH PROPERTIES AS PER SPECN IS 2062-2006 DESIGNATION (FE 410 W) QUALITY-A HAVING STRAIGHT LENGTH OF 2 TO 3 METERS. SIZE: - 115.00 +2.00 MM DIA
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Field Gun Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) BRONZE FORGING FOR SHELL & SAFETY ARM
Description : BRONZE FORGING FOR SHELL & SAFETY ARM()
Specification : AL-BRONZE FORGING 75MM X 45MM IN MULTI
1) AMPOULE RESERVE BATTERY AS PER MTPF DRG NO 770 22 33 00 I AMPOULE BATTERY VITZROCELL VCG1525 10 XX
Description : AMPOULE RESERVE BATTERY AS PER MTPF DRG NO 770 22 33 00 I AMPOULE BATTERY VITZROCELL VCG1525 10 XX()
Specification : AMPOULE RESERVE BATTERY AS PER MTPF DRG.NO.770-22-33-00 i.e. AMPOULE BATTERY VITZROCELL VCG1525 10-XX
C
Estab
Category : ddp
Grade : 1
Size :
L
4469
SK Dynamics Pvt.Ltd.
B 5 Industrial Estate Near Ram Nagar Roorkee Uttarakhand
PIN1 : 247667
Phone No. : 263616 GSTIN : 05AAKCS1322G1ZP
33) FINISH MACHINING OF VARIOUS COMPONENTS INVOLVING PRECISION MACHINING AND SUBASSEMBIES, SSEMBLIES THE
Description : FINISH MACHINING OF VARIOUS COMPONENTS INVOLVING PRECISION MACHINING AND SUBASSEMBIES, SSEMBLIES THE()
1) ST STRIP FOR LMG
Description : ST STRIP FOR LMG()
Specification : ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT
Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT()
Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G)
Specification : STARCH GR II AMMUNITION TO SPECN :IND/ME/459 (C) 2496-ME DT 4-2-84.
R
Estab
2) SILICA GEL BAGS WEIGHING 4 POINT 5 GMS PLUS MINUS ZERO POINT FIVE GMS ITEM CODE 1003250138
Description : SILICA GEL BAGS WEIGHING 4 POINT 5 GMS PLUS MINUS ZERO POINT FIVE GMS ITEM CODE 1003250138()
Specification : SILICA GEL BAGS WEIGHING 4.5GMS (+/-) 0.5GMS CONTAINING SILICA CRYSTALS/GEL OF SIZE 1.00 MM TO 2.00 MM TO SPECN. IS-3401-1992 (THIRD REVISION) (REAFFIRMED 1997) NORMAL TYPE DIMENSION OF BAGS AS PER DRG.NO. khPK-210025 a (ITEM 6)
Specification : PACKING FITMENTS CONSISTING OF ONE NO.EACH OF THE FOLLOWING:1.BOTTOM TO DRG. PT. NO: ISV-1976 DC-36073-A DT 31/01/96.2.TOP TO DRG. PT. NO. : ISV-1975 DC-36073-A DT 31/01/96.
1) VARNISH APC-221 TO THE SPECIFICATION NO. JSS-8010-28 2015 (REV.NO. 3)/LATEST ISSUE
Description : VARNISH APC-221 TO THE SPECIFICATION NO. JSS-8010-28 2015 (REV.NO. 3)/LATEST ISSUE()
Specification : VARNISH APC-221 TO THE SPECIFICATION NO. JSS-8010-28 2015 (REV.NO. 3)/LATEST ISSUE
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) PAINT READYMIXED (OLIVE GREEN) QUICK DRYING MATT FINISH
Description : PAINT READYMIXED (OLIVE GREEN) QUICK DRYING MATT FINISH()
Specification : PAINT READY MIXED (OLIVE GREEN) QUICK DRYING MATT FINISH FOR GENERAL PURPOSE OF IS-220 OF IS-5-2007 (SIXTH REVISION) REAF-2017 TO SPECN: IS-168-2016(4TH REV.) [MODE OF APPLICATION-SPRAYING, AS APPLICABLE FOR DEFENCE USE. (TO BE SUPPLIED I
Specification : SPECN. IS-168 -REAFFIRMED 2012 APPLICABLE FOR DEFENCE USE & COLOUR SHADE ISC NO.359 OF IS:5-2007 (6TH REVISION) AMMENDMENT NO.1. (TO BE SUPPLIED IN 5 LTRS PACK)
R
Estab
3) PAINT R.MIXED MARKING GOLDEN YELLOW
Description : PAINT R.MIXED MARKING GOLDEN YELLOW()
Specification : PAINT R.MIXED MARKING GOLDEN YELLOW ISC-356 OF IS 5-2007 Rev-6, REAF - 2017 TO SPECN: IS-138-1992 (3RD REV.) FOR PACKAGES, MODE OF APPLICATION-STENCILLING.[TOBE SUPPLIED IN 500ML PACK]
