Specification : ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.
1) St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.[01]()
Specification : St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC SK-JVPC-108[70]()
Specification : BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Piston Extension for JVPC[01]()
Specification : Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) St. Forging Plate Bottom to DRG No. SKM-283*2[01]()
Specification : St. Forging Plate Bottom to DRG No. SKM-283*2
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) FORGING RECEIVER GUIDE FRONT RIGHT for MAG[41]()
Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]()
Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),
R
Nonestab
2) STEEL FORGING FOR LEVER LOCKING FOR MAG[04]()
Specification : DRG. NO. SKM-303*5 MICRO-ETCH & NMIR TEST AS PER DRG.
C
Nonestab
3) ST FORGING BUFFER BODY FOR MAG[01]()
Specification : DRG. NO. SKM-304*1
C
Nonestab
4) STEEL FORGING BREECH BLOCK SLIDE FOR MAG[04]()
Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Cylinder Gas[01]()
Specification : Steel Forging Cylinder Gas SKM 306*6 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Barrel Extension Blank up to Stage V for JVPC[70]()
Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING HAMMER FOR JVPC[01]()
Specification : STEEL FORGING HAMMER FOR JVPC 5.56 MM AS PER DRG. NO. SK JVPC 969.
C
Nonestab
2) Steel Forging Block Gas for JVPC[01]()
Specification : STEEL FORGING BLOCK GAS FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6003
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING BLOCK REAR FOR LMG 5 56[03]()
Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17
C
Nonestab
2) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
3) STEEL FORGING TO FOR BLOCK FRONT OF MAG[01]()
Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM
R
Nonestab
4) BUTTON CATCH MAGAZINE FOR JVPC[70]()
Specification : BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-04-00-02-004-00DA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A[91]()
Specification : MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A
C
Nonestab
2) SEMI MACHINING OF 81 MM MORTAR BOMB FROM REAR PART FORGING GSF DRAWING NO M 10177A TO GSF DRAWING NO M 11611 INPUT MATERIAL ITEM CODE 6227100203[91]()
Specification : SEMI MACHINING OF 81 MM MORTAR BOMB FROM REAR PART FORGING GSF DRAWING NO M 10177A TO GSF DRAWING NO M 11611 INPUT MATERIAL ITEM CODE 6227100203
Specification : CARD BOARD DISCS TO DRG.NO 6388106MADE FROM BOARD GLAZED CALANDERED AMMN. 2 MM TO 2.20 MM THICK TO SPECH. JSS-8135-13:2014 REVI-3 DC NO.5257-ME DATED 18/06/2014 (1) MASS= 2250 PLUS-MINUS 225 GM/SQ.MTR. (2) ASH ON INCINERATION AT 800 DEG.C
R
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Itarsi
[ENR Registration]
Name
Specification
Use
Status
1) PAPER KRAFT AMMUNITION
Description : PAPER KRAFT AMMUNITION()
Specification : PAPER KRAFT AMMUNITION SIZE 48.2 CMX 63.4 CM GRADE 170 +/- 10 GMS. TO SPECIFICATION JSS/8135 - 017 -2002(REAFFURNED 2011) DC.NO.5016 -ME DT. 16.03.2011.
Specification : CARD BOARD DISCS TO DRG.NO 6388106MADE FROM BOARD GLAZED CALANDERED AMMN. 2 MM TO 2.20 MM THICK TO SPECH. JSS-8135-13:2014 REVI-3 DC NO.5257-ME DATED 18/06/2014 (1) MASS= 2250 PLUS-MINUS 225 GM/SQ.MTR. (2) ASH ON INCINERATION AT 800 DEG.C
R
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG
Description : 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG()
Specification : JSS 9310- 03: 2010
R
Estab
2) 1419828815 PAPER WHITE FINE
Description : 1419828815 PAPER WHITE FINE()
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
Specification : MOTHER GRAPHITE FOR TEM AS PER DRAWING NO .OFI/2001/GMP/65/7/2./R1
R
Estab
2) CONTROL MOULD FOR PINAKA
Description : CONTROL MOULD FOR PINAKA()
Specification : AS PER HEMRL DRAWING NO. HEMRL/SRP/PIN/CON/04.01 WITH SPECIFICATION SHEET.
R
Estab
3) MOULD FOR NASCHEM CHARGE
Description : MOULD FOR NASCHEM CHARGE()
Specification : AS PER DRG NO OFI/99/GMP/48 R2.MATERIAL- ALUMINIUM ALLOY HE-30 AND AS PER SPECIFICATION NO 37/ PROC / GMP DT 15/01/2008
R
Estab
4) SET OF CASTING MANDRELS
Description : SET OF CASTING MANDRELS()
Specification : SET OF CASTING MANDRELS(FRONT & REAR) FOR PINAKA , AS PER SPECIFICATION NO. 54/PINAKA/GMP/OFI DT. 01/09/2016.
R
Estab
5) GRAPHITE INSERT FOR TEM
Description : GRAPHITE INSERT FOR TEM()
Specification : AS PER DRAWING NO. OFI/2001/GMP/65/7/3. 2. LINER FOR RZ-61 FULL SCALE MOTOR AS PER DRAWING NO. OFI/2003/GMP/85 R1 MATERIAL: EPOXY + SILICA FABRIC (COLD CURED). 3. PYRO CARTRIDGE HOLDER FOR SPC(5B-29)AS PER SKETCH NO. 220 OF NAI JABALPUR.
Specification : MOTHER GRAPHITE FOR TEM AS PER DRAWING NO .OFI/2001/GMP/65/7/2./R1
R
Estab
2) CONTROL MOULD FOR PINAKA
Description : CONTROL MOULD FOR PINAKA()
Specification : AS PER HEMRL DRAWING NO. HEMRL/SRP/PIN/CON/04.01 WITH SPECIFICATION SHEET.
R
Estab
3) MOULD FOR NASCHEM CHARGE
Description : MOULD FOR NASCHEM CHARGE()
Specification : AS PER DRG NO OFI/99/GMP/48 R2.MATERIAL- ALUMINIUM ALLOY HE-30 AND AS PER SPECIFICATION NO 37/ PROC / GMP DT 15/01/2008
R
Estab
4) SET OF CASTING MANDRELS
Description : SET OF CASTING MANDRELS()
Specification : SET OF CASTING MANDRELS(FRONT & REAR) FOR PINAKA , AS PER SPECIFICATION NO. 54/PINAKA/GMP/OFI DT. 01/09/2016.
R
Estab
5) GRAPHITE INSERT FOR TEM
Description : GRAPHITE INSERT FOR TEM()
Specification : AS PER DRAWING NO. OFI/2001/GMP/65/7/3. 2. LINER FOR RZ-61 FULL SCALE MOTOR AS PER DRAWING NO. OFI/2003/GMP/85 R1 MATERIAL: EPOXY + SILICA FABRIC (COLD CURED). 3. PYRO CARTRIDGE HOLDER FOR SPC(5B-29)AS PER SKETCH NO. 220 OF NAI JABALPUR.
Specification : ALKATHENE LINER 500 GAUGE(0.127 MM+ OR - 10%) THICK POLYTHENE TUBE 900 MM WIDE AND 1200 MMLENGTH WHEN LAID FLAT BOTTOM FLATTENED AND SEAMED SECURELYBY FUSION BONDING.DRG.NO OFI/2005/NC/164.
Specification : CORRUGATED FIBRE BOARD BOXES(PROVI)OF INTERNAL DIMENSIONS 400 MM X 400 MM X 600 MM,SPCN.NO.OFI/ 100/NIGU/SPCN,ISSUE NO-2 (TWO) DT. 27-11-2010 & AS PER DRG. NO.OFI/2010/NIGU/297 R1.
Specification : ALKATHENE LINER 500 GAUGE(0.127 MM+ OR - 10%) THICK POLYTHENE TUBE 900 MM WIDE AND 1200 MMLENGTH WHEN LAID FLAT BOTTOM FLATTENED AND SEAMED SECURELYBY FUSION BONDING.DRG.NO OFI/2005/NC/164.
R
Estab
3) Bag Polythene
Description : Bag Polythene()
Specification : JSS-9330-03 1995 REV. NO. 1 DC NO. 3490 ME DTD. 14.01.98
R
Estab
4) Bag HDPE Woven With Polythene Liner
Description : Bag HDPE Woven With Polythene Liner()
Specification : 16TEX X 6 BLEACHED UNPROOFED. TO SPECIFICATION NO JSS 8310-02:2007 REVISION NO. 2 DC NO. 4020-ME DATED 8.1.2010 IN ROLLS OF 1000 METRE LENGTH.
R
Estab
6) Di Phenyl Amine
Description : Di Phenyl Amine()
Specification : SPCN. JSS-6810-129:2015 AND REVISION NO.3,DC NO.5395-ME DT.01.02.2016(1)PRIMARY AMINES O.10% INSTEAD OF 0.20% MAX.(2)SETTING POINT BETWEEN 51.7 DEGREE CELCIUS TO 53 DEGREE CELCIUS INSTEAD OF 51.5 DEGREE CELCIUS TO 53 DEGREE CELCIUS.(3)MOI
Specification : :-ETHYL ACETATE GRADE I TO SPCN.IS 229-1993 (THIRD REVISION ) REAFFIRMED 2014 WITH INITIALBOILING POINT (IBP) MINIMUM 75.0 DEG. CENTIGRADE ANDDISTILATION RANGE NOT MORE THAN 2.5 DEG. CELSIUS WHICHSHOULD INCLUDE 77.2 DEG. CELSIUS. ( MATERI
R
Estab
9) TOLUENE DI ISOCYANATEAS
Description : TOLUENE DI ISOCYANATEAS()
Specification : TOLUENE DI-ISOCYANATEAS PER SPEC ERDL/TRIM/PROP/RM/6(PROVISIONAL) DOC.NO.HEMRL/SRP/PIN/MQAP/6 COPY NO-2 REV. NO.-6 DATED 20/05/2015MAKE -(1) M/S E.MERCK, MUMBAI (2) M/S ARC ORGANICS.(3)M/S BAYER PHARMACEUTICALS PVT LTD, THANE.
