4821
GK MICROMETALS PVT. LTD
BPLG03141F
Download
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) AL. POWDER HEAVY GRI SIZE-125 MICRON[10]()
Specification : JSS 1370-03:2014(REV No.3)
R
Nonestab
Category : p
1Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Aluminium Powder Heavy Grade -I, Size-125 Micrometer[10]()
Specification : ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.
R
Nonestab
Category : p
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ALUMINIUM POWDER HV GR1 60BSS JSS-1370-03 (1001017225)[10]()
Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.
R
Nonestab
2) ALUMINIUM POWDER HEAVY GR.1 (1001017163)[10]()
Specification : JSS-1370-03:2007 REVISION NO (3)
R
Nonestab
Category : p
4822
K MAX TECHNOLOGIES PVT LTD
CHEK08401B
Download
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) OBTURATOR FOR AMK 339[01]()
Specification : AS PER MONITORING INSTRUCTION NO. HAPP/QA/SC/AMK/002, ISSUE NO. 01, REV NO.01, DT. 03.12.2018,
C
Nonestab
Category :
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) OBTURATOR FOR 125MM FSAPDS[01] DOP 550MM()
Specification : AS PER MONITORING INSTRUCTION NO.HAPP/QA/SC/G/033, ISSU NO.01, REV NO.02 DT:02/05/19
C
Nonestab
Category :
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
C
Nonestab
2) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
Category :
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) Assembly Centre Contact for RGB 60[03]()
Specification : ASSY CENTRE CONTACT FOR RGB-60 AS PER DRG.NO:NASK 1068/8, NASK 1068/8/1, NASK 1068/8/2, NASK 1068/8/3.
(L..F No. 0126701688)
C
Nonestab
Category :
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) CENDERING BAND()
AS PER DRAWING
C
NOT ESTABLISHED
2) DRIVING BAND()
AS PER DRAWING
C
NOT ESTABLISHED
3) PLASTIC CONTAINER()
AS PER DRAWING
C
NOT ESTABLISHED
4) RUBBER SEAL()
AS PER DRAWING
C
NOT ESTABLISHED
Category : P
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PROPELLANT SUPPORT PART NO 1185138 LF 9911358419
Description : PROPELLANT SUPPORT PART NO 1185138 LF 9911358419()
Specification : PROPELLANT SUPPORT PART NO.1185138 TO OEM DRG.NO.3041011484/ TRD.DRG.NO. 2.2.2412
R
Nonestab
Category : p
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) COLLAR()
DRG.NO. 432.40.037-2
C
Not Estab.
2) COLLAR()
DRG.NO. 432.40.047-4
C
Not Estab.
3) RUBBER SHIELDS (02 TYPES)()
DRG.NO. 1)172.04.451-2, 2) 172.04.421-1
C
Not Estab.
4) COLLAR()
DRG.NO. 432.40.036-2
C
Not Estab.
Category : P
1Engine Factory Avadi
Name
Specification
Use
Status
1) TA in m/c.of bearing cap of 8th support (opn.no.10-70)[00]()
Specification : TA in m/c.of bearing cap of 8th support (opn.no.10-70)
E
Estab
2) INJECTOR ASSEMBLY UTD[62]()
Specification : INJECTOR ASSEMBLY UTD
C
Estab
3) SPRAYER(INJECTOR)[62]()
Specification : SB 317-00-33-01
C
Estab
4) TA in m/c.of thrust bearing cap (opn.no.10-70)[00]()
Specification : TA in m/c.of thrust bearing cap (opn.no.10-70)
E
Estab
Category : ddp
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) MODE SELECTOR SWITCH ASSEMBLY AND MODE SELECTOR SWITCH (MSS) AND MSS HOUSING[99]()
Specification : MODE SELECTOR SWITCH ASSEMBLY AND MODE SELECTOR SWITCH (MSS) AND MSS HOUSING
E
Nonestab
Category : ddp
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) NOSE OGIVE FOR 155 PD, DRG.NO.140-01-12-00, NORYL GFN 2- BEIGE COLOR 801[99]()
Specification : NOSE OGIVE FOR 155 PD, DRG.NO.140-01-12-00, NORYL GFN 2- BEIGE COLOR 801
R
Nonestab
Category : ddp
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) RIGHT BATTERY SEGMENT FOR FUZE FB40 TO DRG NO:3690120.[71]()
Specification : RIGHT BATTERY SEGMENT FOR FUZE
FB40 TO DRG NO:3690120.
R
Nonestab
Category : ddp
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) LEFT SEGMENT OF BATTERY FOR FUZE FB40 TO DRG.NO: 3690110[71]()
Specification : LEFT SEGMENT OF BATTERY FOR FUZE FB40 TO DRG.NO: 3690110
C
Nonestab
Category : ddp
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) BATTERY AND L.F. CIRCUIT SUPPORT ASSY FOR FUZE FB40 TO DRG.NO: 5690020[71]()
Specification : BATTERY AND L.F. CIRCUIT SUPPORT
ASSY FOR FUZE FB40 TO DRG.NO: 5690020
R
Nonestab
Category : ddp
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) E-MODULE HOUSING DRG.NO.740-12-21-00[99]()
Specification : E-MODULE HOUSING DRG.NO.740-12-21-00
R
Nonestab
Category : ddp
1Opto Electronic Factory
Name
Specification
Use
Status
1) CASING FOR HEAD 1G46 TO DRG NO. AL8635059 (7440200784)[7440200784]()
Specification : AS PER DRAWING
C
Estab
Category : p
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) housing ep to drg. cwc/229/32/2[74]()
Specification : housing ep to drg. cwc/229/32/2
C
Nonestab
Category : p
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) FRAME FOR GOGGLES ALL TERRAIN AS PER DRG NO CQA GS PROV GS 5 1 2012 C SHT 2 OF 4 WITH ELASTIC TAPE INCLUDING PIN and BUCKLE COMPLETE DRG NO CQA GS PROV GS 5 1 2012 C SHT 3 OF 4 DETAILED SPECN FOR FRAME and ELASTIC TAPE AS PER ANNEXURE[74]()
Specification : FRAME FOR GOGGLES(ALL TERRAIN) AS PER
DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.2 OF 4,
WITH ELASTIC TAPE INCLUDING PIN & BUCKLE(COMPLETE)
DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.3 OF 4.
DETAILED SPECN. FOR FRAME & ELASTIC TAPE AS
PER
C
Nonestab
2) A SET OF 19 COMPONENTS OF HR BINO AS PER DETAIL OF COMPONENTS MENTIONED IN ANNEXURE A[74]()
Specification : A SET OF 19 COMPONENTS OF HR BINO AS PER DETAIL OF COMPONENTS MENTIONED IN ANNEXURE-"A". Eye piece cover green, Interpupillary distance plate printed, Rubber armouring right, Rubber armouring left, Objective cap right green, Objective ca
C
Estab
3) LENS FOR GOGGLES ALL TERRAIN AS PER DRG NO CQA GS PROV GS 5 1 2012 C SHT 4 OF 4 WITH MICRO FIBER CLEANING CLOTH OF SIZE 20 CM X 20 CM MADE OF 100 percent POLYESTER IN BLACK COLOUR DETAILED SPECN FOR LENS AS PER ANNEXURE[74]()
Specification : LENS FOR GOGGLES(ALL TERRAIN) AS PER
DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C),SHT. 4 OF 4
WITH MICRO FIBER CLEANING CLOTH OF
SIZE 20 CM X 20 CM MADE OF 100% POLYESTER IN
BLACK COLOUR.
DETAILED SPECN. FOR LENS AS PER ANNEXURE.
C
Nonestab
4) SHOCK ABSORBER TO DRG NO MCT 1420 COMP COMPRISING OF MCT 1419 MCT 1421 DULY RUBBER MOULDED[74]()
Specification : SHOCK ABSORBER TO DRG NO. MCT-1420(COMP) COMPRISING OF MCT-1419 & MCT-1421. DULY RUBBER MOULDED
C
Nonestab
Category : p
1Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) SPOOL PLASTIC TO HOLD 55 METERS OF CABLE[70]()
Specification : SPOOL PLASTIC TO HOLD 55 METERS OF CABLE DRG. NO. OCF SK 1087-B
R
Nonestab
Category : p
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 5000 WITH FIRMS MATERIAL
C
Nonestab
Category : p
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040
E
Nonestab
Category : p
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIXED BUTT ASSY AS PER DRG No K3000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL
C
Nonestab
Category : p
1Ordnance Factory Varangaon
Name
Specification
Use
Status
1) PLASTIC BULLET FOR CARTG. 7.62MM ANTI RIOT[60]()
Specification : AS PER DRG.NO.
C
Nonestab
Category : ddp
1Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) Button Polyester 19mm OG[21]()
Specification : IS 1461-1984 second revision (reaffirmed - 2003)
R
Nonestab
Category : ddp
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ROTOR HOLDER TO OFAJ DRG NO FS 2473 B FOR FUZE M842 AMMN 20 MM AMR HEI[00]()
Specification : "ROTOR HOLDER"TO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI.
C
Nonestab
2) ROTOR HOLDER TO OFAJ DRG NO FS 2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI[00]()
Specification : "ROTOR HOLDER" TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI
C
Nonestab
Category : p
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SET OF 6 COMPONENTS FOR ARMING DEVICE FOR HEAT-551()
SET OF FOLLOWING 6 COMPONENTS FOR ARMING DEVICE FOR 84MM 551 (1) HOUSING TRD NO. 2-2-2217 (2) CONTACT SLEEVE TRD NO. 1-2-2192 (3) CONTACT PIECE RETAINER TRD NO. 1-2-2194 (4) CONTACT SLEEVE INSULATOR TRD NO. 1-2-2199 (5) PROTECTIVE COVER TRD NO. 2-2-2197 &
C
NOT ESTABLISHED
Category : P
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) BULLET RUBBER FOR CARTG 38 MM[60]()
Specification : DGOF 135
C
Nonestab
2) RUBBER RING DRG ARDE/2165/5 ERU204[60]()
Specification : ARDE/SPECN/423
C
Nonestab
Category : p
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) SET OF COMPONENTS FOR PYRO CARTRG.[60]()
Specification : DRG ERDL 898
C
Nonestab
2) 105 MM LRIR EMPTY[61]()
Specification : DRG.NO. NASK 987 DT.20.04 .15
C
Nonestab
3) 105MM LONG RANGE CHAFF ROCKETS (LRCR)[93]()
Specification : DRG.NO.NASK 760 SHEET 1 OF 2 SHTS. (PROV) DT.20.04.2015.
C
Nonestab
4) BASE CAP (BLACK) FOR PROJECTILE[60]()
Specification : DRG. NO. AFK/PJ/SK-62/1
C
Nonestab
5) BOOSTER CARTG ASSY EMPTY[60]()
Specification : DRG.NO. AFK/SK-014-03 DT.27.12.12
C
Nonestab
6) CENTER PIECE (MODIFIED) FOR GRENADE[60]()
Specification : DRG.NO. AFK/SK/798-14
C
Nonestab
7) CENTRE PIECE DET 2 PT ITW 64 DC (I)[61]()
Specification : CQA(A) 1504
C
Estab
8) FUZE MINE COMB.M605 ASSEMBLY EMPTY[63]()
Specification : CQA(A) 1803
C
Nonestab
9) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]()
Specification : I.A. 1204
C
Nonestab
10) MINE APM CONSISTING OF BODY,SPOOL[61]()
Specification : CQA(A) 1804
C
Nonestab
11) PLASTIC MOULDED ITEMS FROM 5 GRAMS TO 5.5 KILOGRAMS[60]()
Specification : AS PER AHSP/ AFK SPECIFICATION
C
Nonestab
12) HOUSING (EMPTY) FOR IGNITER EB-2[60]()
Specification : DRG.NO. AFK/SK-347-06
C
Nonestab
13) CASE CARTG OF 25 PR MK 2/1/L BRASS TO DRG NO DD(L) 6557 E PART NO. RW-32[60]()
Specification : DRG NO DD(L) 6557 E PART NO. RW-32
C
Nonestab
14) IGNITER FOR ROCKET 140 MM EMPTY ASY[60]()
Specification : 1)BODY(CONTAINER) TO DRG.NO. NASK 776/9/1/1/1 (PROVISIONAL)DT. 13-5-04 QTY.1 NO. 2)DISC TO DRG NO.NASK 776/9/1/1/2 (PROVISIONAL) DT. 29-5-01 QTY 2 NOS 3) BODY (LID) TO DRG NO. NASK 776/9/1/2/1 (PROVISI ONAL) DT.29-1-04 QTY 1NO.
C
Nonestab
Category : p
4823
PRECISION MACHINE TOOLS
AVFPS5807H
Download
1Opto Electronic Factory
Name
Specification
Use
Status
1) STEM FINISHED TO DRG NO BSH8126170 LF 7434011004[74]()
Specification : STEM FINISHED TO DRG NO BSH8126170 (LF 7434011004)
C
Nonestab
Category :
1Opto Electronic Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING BASE LF 9927068774[99]()
Specification : INVESTMENT CASTING BASE LF 9927068774
C
Nonestab
2) INVESTMENT CASTING BRACKET LF 9927068795[99]()
Specification : INVESTMENT CASTING BRACKET LF 9927068795
C
Nonestab
3) INVESTMENT CASTING HOLDER LF 9927068805[99]()
Specification : INVESTMENT CASTING HOLDER LF 9927068805
C
Nonestab
4) INVESTMENT CASTING FOR HANDLE LF 9927068880[99]()
Specification : INVESTMENT CASTING FOR HANDLE LF 9927068880
C
Nonestab
5) INVESTMENT CASTING FOR SCREW LF 9927068894[99]()
Specification : INVESTMENT CASTING FOR SCREW LF 9927068894
C
Nonestab
6) INVESTMENT CASTING BUSH LF 9927068917[99]()
Specification : INVESTMENT CASTING BUSH LF 9927068917
C
Nonestab
7) INVESTMENT CASTIING HOLDER LF 9927069029[99]()
Specification : INVESTMENT CASTIING HOLDER LF 9927069029
C
Nonestab
8) COVER PLATE LF 9927084511[99]()
Specification : COVER PLATE LF 9927084511
C
Nonestab
9) BRACKET LF 9927090646[99]()
Specification : BRACKET LF 9927090646
C
Nonestab
10) INVESTMENT CASTING FLANGE LF 9927095589[99]()
Specification : INVESTMENT CASTING FLANGE LF 9927095589
C
Nonestab
11) INVESTMENT CASTING HOUSING LF 9927095689[99]()
Specification : INVESTMENT CASTING HOUSING LF 9927095689
C
Nonestab
12) INVESTMENT CASTING HOLDER LF 9927096071[99]()
Specification : INVESTMENT CASTING HOLDER LF 9927096071
C
Nonestab
13) INVESTMENT CASTING FOR CAP LF 9927098789[99]()
Specification : INVESTMENT CASTING FOR CAP LF 9927098789
C
Nonestab
14) INVESTMENT CASTING FOR CARRAGE LF 9927098900[99]()
Specification : INVESTMENT CASTING FOR CARRAGE LF 9927098900
C
Nonestab
15) FLANGE CASTING LF 7520121400[75]()
Specification : FLANGE CASTING LF 7520121400
C
Nonestab
16) INVESTMENT CASTING FOR SLEEVE LF 9927098801[99]()
Specification : INVESTMENT CASTING FOR SLEEVE LF 9927098801
C
Nonestab
17) COVER LF 7431411001[74]()
Specification : COVER LF 7431411001
C
Nonestab
18) BODY LF 7433511003[74]()
Specification : BODY LF 7433511003
C
Nonestab
19) CONNECTING ROD LF 7440205910[74]()
Specification : CONNECTING ROD LF 7440205910
C
Nonestab
20) CONNECTING ROD LF 7440205911[74]()
Specification : CONNECTING ROD LF 7440205911
C
Nonestab
Category :
1Opto Electronic Factory
Name
Specification
Use
Status
1) BODY LF 7432311060[74]()
Specification : BODY LF 7432311060
C
Nonestab
Category :
1Opto Electronic Factory
Name
Specification
Use
Status
1) BODY LF NO 7420211089[74]()
Specification : BODY LF NO 7420211089
C
Nonestab
2) MAGNET LF NO 7432417009[74]()
Specification : MAGNET LF NO 7432417009
C
Nonestab
Category : p
1Opto Electronic Factory
Name
Specification
Use
Status
1) SET OF 06 TYPES OF MECHANICAL ITEMS LF O 7434011009[74]()
Specification : SET OF 06 TYPES OF MECHANICAL ITEMS LF O 7434011009
C
Nonestab
Category : p
1Opto Electronic Factory
Name
Specification
Use
Status
1) PLUG FOR BLOCK BPV29 LF NO 7445601240[74]()
Specification : PLUG FOR BLOCK BPV29 LF NO 7445601240
C
Nonestab
2) PLUG LF NO 7440205908[74]()
Specification : PLUG LF NO 7440205908
C
Nonestab
3) GASKET FOR BLOCK BPV29 LF NO 7440901251[74]()
Specification : GASKET FOR BLOCK BPV29 LF NO 7440901251
C
Nonestab
4) COVER LF NO 7440901464[74]()
Specification : COVER LF NO 7440901464
C
Nonestab
5) GASKET LF NO 7440901252[74]()
Specification : GASKET LF NO 7440901252
C
Nonestab
6) GASKET LF NO 7440901253[74]()
Specification : GASKET LF NO 7440901253
C
Nonestab
Category : p
1Opto Electronic Factory
Name
Specification
Use
Status
1) BODY CASTING LF NO 7515128900[75]()
Specification : BODY CASTING LF NO 7515128900
C
Nonestab
2) BODY CASTING SC/52/651 (LF 7515230400)[75]()
Specification : BODY CASTING SC/52/651 (LF 7515230400)
C
Nonestab
3) BRACKET CASTING LF NO 7520203400[75]()
Specification : BRACKET CASTING LF NO 7520203400
C
Nonestab
4) INVESTMENT CASTING FOR BOARD LF NO 9927099227[99]()
Specification : INVESTMENT CASTING FOR BOARD LF NO 9927099227
C
Nonestab
5) SHAFT CASTING LF NO 7512408500[75]()
Specification : SHAFT CASTING LF NO 7512408500
C
Nonestab
6) INVESTMENT CASTING MANDREL LF NO 9927092205[99]()
Specification : INVESTMENT CASTING MANDREL LF NO 9927092205
C
Nonestab
Category : p
4824
POLYNOVA INDUSTRIES LIMITED
AAACP3071F
Download
1Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) PU Coated Nylon Fabric in Camouflage Design 150 cm Excluding Selvedges[21]()
Specification : AS PER ENCLOSED SPECIFICATION
R
Nonestab
2) PU COATED NYLON FABRIC IN BLACK COLOUR 150 CMS EXCLUDING SELVEDGES[21]()
Specification : PROV/1201905/001(a)
R
Nonestab
Category :
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) FABRIC PP TPO COATED WITH F.R. TREATED FOR FLOORING 115 CM WIDE[21]()
Specification : As per rquirement & specification
R
Nonestab
2) GROUND SHEET TPO O.G.[21]()
Specification : IND/TC/2328(b)
R
Estab
3) FABRIC NYLON 75 GMS O.G. POLYURETHANE COATED 100 CM WIDE[21]()
Specification : DMSRDE/TEX-3(P)/2001/1/(V.NO. 2)
R
Estab
4) BOTH SIDE PVC COATED 650 GSM FIRE RETARDANT FABRIC 150 CM WIDE[21]()
Specification : As per rquirement & specification
R
Estab
5) BOTH SIDE PVC COATED NYLON FABRIC DARK BROWN (SHADE NO. 412 OF IS:5) WIDTH 100 CMS[21]()
Specification : MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO.
R
Estab
6) BOTH SIDE PVC COATED NYLON FABRIC LIGHT GREEN (SHADE NO. 218 OF IS:5) WIDTH 100 CMS[21]()
Specification : MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO.
R
Estab
7) BOTH SIDE PVC COATED NYLON FABRIC OLIVE GREEN (SHADE NO. 220 OF IS:5) WIDTH 100 CMS[21]()
Specification : MATL. WILLBE SUPP. AS PER APPENDIX-I OF DMSRDE SPECN. NO.
R
Estab
8) BOTH SIDE PVC COATED NYLON FABRIC SAND COLOUR (SHADE NO.388 OF IS:5) WIDTH 100 CMS[21]()
Specification : MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO.
R
Estab
9) BOTH SIDE PVC COATED NYLON FABRIC WITH F.R. TREATMENT 135 CM WIDE[21]()
Specification : As per rquirement & specification
R
Estab
10) BOTH SIDE PVC COATED POLYESTER FABRIC DARK BROWN (SHADE NO. 412 OF IS:5) WIDTH 100 CMS[21]()
Specification : MATL. WILLBE SUPP. AS PER APPENDIX-III OF DMSRDE SPECN.NO.
R
Estab
11) BOTH SIDE PVC COATED POLYESTER FABRIC WHITE WIDTH 100 CMS.[21]()
Specification : MATL. WILLBE SUPP. AS PER APPENDIX-III OF DMSRDE SPECN.NO.
R
Estab
12) DRILL COTTON PROOFED WHITE (BLEACHED) 71 CMS.[21]()
Specification : IND/TC/097 (c)
R
Estab
13) FABRIC NYLON 66 BREATHABLE POLY URETHENE COATED DISRUPTIVE ARMY COMOFLAGE PATTERN 180 + 2 CM (NO NEG[21]()
Specification : CQA (T&C) PROV. SPECN NO. PROV/S/3566/RAIN CAPE MP DIS/TC-15(b) APPENDIX "A" & AS IN TE
R
Estab
Category : DP
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) FABRIC PP TPO COATED WITH F.R. TREATED FOR FLOORING 115 CM WIDE[21]()
Specification : As per rquirement & specification
R
Nonestab
2) GROUND SHEET TPO O.G.[21]()
Specification : IND/TC/2328(b)
R
Nonestab
3) FABRIC NYLON 75 GMS O.G. POLYURETHANE COATED 100 CM WIDE[21]()
Specification : DMSRDE/TEX-3(P)/2001/1/(V.NO. 2)
R
Nonestab
4) BOTH SIDE PVC COATED 650 GSM FIRE RETARDANT FABRIC 150 CM WIDE[21]()
Specification : As per rquirement & specification
R
Nonestab
5) BOTH SIDE PVC COATED NYLON FABRIC DARK BROWN (SHADE NO. 412 OF IS:5) WIDTH 100 CMS[21]()
Specification : MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO.
R
Nonestab
6) BOTH SIDE PVC COATED NYLON FABRIC LIGHT GREEN (SHADE NO. 218 OF IS:5) WIDTH 100 CMS[21]()
Specification : MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO.
R
Nonestab
7) BOTH SIDE PVC COATED NYLON FABRIC OLIVE GREEN (SHADE NO. 220 OF IS:5) WIDTH 100 CMS[21]()
Specification : MATL. WILLBE SUPP. AS PER APPENDIX-I OF DMSRDE SPECN. NO.
R
Nonestab
8) BOTH SIDE PVC COATED NYLON FABRIC SAND COLOUR (SHADE NO.388 OF IS:5) WIDTH 100 CMS[21]()
Specification : MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO.
R
Nonestab
9) BOTH SIDE PVC COATED NYLON FABRIC WITH F.R. TREATMENT 135 CM WIDE[21]()
Specification : As per rquirement & specification
R
Nonestab
10) BOTH SIDE PVC COATED POLYESTER FABRIC DARK BROWN (SHADE NO. 412 OF IS:5) WIDTH 100 CMS[21]()
Specification : MATL. WILLBE SUPP. AS PER APPENDIX-III OF DMSRDE SPECN.NO.
R
Nonestab
11) BOTH SIDE PVC COATED POLYESTER FABRIC WHITE WIDTH 100 CMS.[21]()
Specification : MATL. WILLBE SUPP. AS PER APPENDIX-III OF DMSRDE SPECN.NO.
R
Nonestab
12) DRILL COTTON PROOFED WHITE (BLEACHED) 71 CMS.[21]()
Specification : IND/TC/097 (c)
R
Nonestab
13) FABRIC NYLON 66 BREATHABLE POLY URETHENE COATED DISRUPTIVE ARMY COMOFLAGE PATTERN 180 + 2 CM (NO NEG[21]()
Specification : CQA (T&C) PROV. SPECN NO. PROV/S/3566/RAIN CAPE MP DIS/TC-15(b) APPENDIX "A" & AS IN TE
R
Nonestab
14) BREATHABLE RAIN COAT NYLON FABRIC NAVY BLUE 100 CMS. (MIN), 135 + - 10 CMS.[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
15) CLOTH POLYPROPYLENE OG TPO COATING 115 CMS WIDE.[21]()
Specification : SPECIFICATION NO: JSS 8305 - 35 : 2014 {7218/PK} EXCEPT THAT
R
Nonestab
16) FABRIC NYLON 250 GSM PU COATED 120 CMS O.G[21]()
Specification : as per requirement
R
Nonestab
17) FABRIC NYLON 300 GSM RIP STOP PU COATED FR 152 CMS WIDE[21]()
Specification : AS PER SPEC
R
Nonestab
18) FABRIC NYLON 66 AIRTEXTURED PU COATED INDIAN ARMY PRINT 135/136 CMS[21]()
Specification : SPECN. NO. IND / TC / 0155 AND AS PER ANNEXURE 'A' ATTACHED
R
Nonestab
19) FABRIC NYLON BLACK 250 GMS P U COATED 172 CMS WIDE.[21]()
Specification : Specification No. IND/TC/0155 Except Threads/Cm (As per
R
Nonestab
20) NYLON FABRIC 220 GMS O.G. 100 CM WIDE WATER & OIL REPELLENT[21]()
Specification : PROV.SPECIFICATION NO.DMSRDE/T&GS/96/431(B)
R
Nonestab
21) NYLON FABRIC O.G. POLYURETHANE COATED (250 GM/SQR M)91 CM[21]()
Specification : SPECN. NO. IND/TC/2314 (a)
R
Nonestab
22) PVC COATED FR TREATED GREY COLOUR POLYESTER FABRIC 360 GSM 91 CMS[21]()
Specification : AS PER APPENDIX "B" ATTACHED TO PROV. SPECN. S/6252/A/TC-6
R
Nonestab
Category : DP
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Three Layer WP Breathable fabric DS OG/WH 118cm()
As per Appendix A of Specn.No.IND/TC/4587
R
Not Established
2) Fabric Nylon Knitted Aluminised 100cm()
IND/TC/0161
R
Not Established
3) Fabric Nylon 75GSM WH PU Coated 152cm()
IND/TC/0157
R
Not Estab
Category : DP
4825
EBCO PVT LTD
AAACE1625N
Download
1Gun and Shell Factory
Name
Specification
Use
Status
1) Link for AO 18 AK 630 Drg no 3 AO 18 001 AS PER TECH SPECN NO 3 AO 18 001 TY NASK 835 PROV
Description : Link for AO 18 AK 630 Drg no 3 AO 18 001 AS PER TECH SPECN NO 3 AO 18 001 TY NASK 835 PROV()
Specification : AS PER DRAWING
C
Estab
Category : ddp
1Ordnance Factory Medak
Name
Specification
Use
Status
1) LINK 9H 623
Description : LINK 9H 623()
Specification : As per drawing
E
Estab
Category : p
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) LINK BELT FOR CARTRIDGE TO 6201000274
Description : LINK BELT FOR CARTRIDGE TO 6201000274()
Specification : 6L19CBCB
C
Estab
2) BELT LINK TO 6206609288
Description : BELT LINK TO 6206609288()
Specification : 6L19-1
C
Estab
Category : p
4826
SRIVARI METAL WORKS
ABZPT1095Q
Download
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) DIAPHRAGM [64]()
Specification : PART NO.ISV 95 SA FOR PACKING OF PRIMER 1A/L. [REFER OFBL DRG.NO.BL/EQP/U-1/241]
C
Nonestab
Category :
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PARTITION TO PART NO.ISV 227SA[64]()
Specification : PARTITION TO PART NO.ISV 227SA DC.35919-A Dt.21.02.95 PACKING OF FUZE 117 MK-20.
C
Nonestab
2) PLYWOOD 6 MM (+/-6%) THICKNESS OF SIZE: (8'X4')[22]()
Specification : PLYWOOD 6 MM (+/-6%) THICKNESS OF SIZE: (8'X4') MR GRADE,TYPE:AB,BRANDED QUALITY TO SPECN. IS: 303(LATEST ISSUE).
C
Nonestab
3) PIECE PACKING BOTTOM B 448 X 165 X 6 MM TH (5 PLY)[64]()
Specification : PIECE PACKING BOTTOM "B" 448 X 165 X 6 MM TH (5 PLY) ITEM NO 7 PT NO ISV-465 GA DRG NO CQA (A) /AMN/2543.SHEET-1 DC-36814-A DT.15.02.02
C
Nonestab
4) PARTITION 410 X 45 X 3 MM TH (5 PLY ITEM NO 9 PT[64]()
Specification : PARTITION 410 X 45 X 3 MM TH (5 PLY ITEM NO 9 PT NO ISV-465 GA DESIGNER REF CQA/AMN/2543 SHEET-1 DC NO.36814-A DT.15-02-02
C
Nonestab
5) PIECE PACKING TOP[64]()
Specification : PIECE PACKING TOP TO PT NO ISV-240 SA DRG NO CQA(A)/AMN/2543,DET-1.DC-35099-A DT.31-05-91
C
Nonestab
6) PIECE PACKING END[64]()
Specification : PIECE PACKING END TO PT NO ISV-241 SA DRG NO CQA(A)/AMN/2543.Dt-2 DC.35099-A Dt.31-05-91
C
Nonestab
7) PIECE PACKING[64]()
Specification : PIECE PACKING TO PT NO ISV-1775 DRG NO CQA(A)/AMN/2543.DET-3.DC NO -34312-A DT.30.01.88
C
Nonestab
8) PIECE PACKING BOTTOM[64]()
Specification : PIECE PACKING BOTTOM "A" PT NO ISV-242 SA DRG NO CQA(A)/AMN/2543.Det-4.DC NO-35099-A DT.31-05-91
C
Nonestab
9) PIECE PACKING SIDE PART NO.ISV228SA[64]()
Specification : PIECE PACKING SIDE PART NO.ISV228SA DC.35919A Dt.21.02.95 FOR PACKING OF FUZE 117 MK-20.
C
Nonestab
Category :
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) MOP 12 SHELLS 155MM BT ON PELLET WITHOUT GRUMMET()
Specification : TO DRG.NO.155-1000(M) (UNIT LOAD) CONSISTING OF PALLET TO DRG.NO.155-1210(M), FRAME ASSEMBLY TO DRG.NO.155-1230(M) DC NO.37126-A,DT.25.07.07.
C
Nonestab
2) BOX UNIT LOAD FOR 155 MM SHELL M107 1465000220[14]()
Specification : DRG.NO.3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002
C
Nonestab
Category :
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) GI.WIRE, 20SWG SOFT GALVANISED STEEL
Description : GI.WIRE, 20SWG SOFT GALVANISED STEEL()
Specification : GI.WIRE, 20SWG SOFT GALVANISED STEEL TO IS: 280-2006 (4th Rev.)
P
Estab
Category : p
4827
VISHAL ENGINEERING COMPANY
PNEV11826D
Download
1Engine Factory Avadi
Name
Specification
Use
Status
1) RH HEAD COVER[62]()
Specification : RH HEAD COVER TO DRG NO.SB 406-08-3
C
Estab
2) LH HEAD COVER[62]()
Specification : LH HEAD COVER TO DRG NO.SB 306-09-8
C
Estab
Category :
4828
BONIK INTERNATIONAL
AADFB1693H
Download
1Ordnance Factory Medak
Name
Specification
Use
Status
1) BUTTON ASSEMBLY
Description : BUTTON ASSEMBLY()
Specification : 675-95-Cb174
C
Estab
Category : p
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) FAN WITH BRACKET ASSY TO 6201071035
Description : FAN WITH BRACKET ASSY TO 6201071035()
Specification : 188.71.051CBCB
C
Estab
2) FAN ASSY TO 6201071037
Description : FAN ASSY TO 6201071037()
Specification : 188.71.053CBCB
C
Estab
3) FAN ASSY TO 6201071054
Description : FAN ASSY TO 6201071054()
Specification : 172.71.087CBCB
C
Estab
4) STRAP TO 6201074023 TO DRG NO 188 74 020
Description : STRAP TO 6201074023 TO DRG NO 188 74 020()
Specification : 188.74.020
C
Estab
5) NAMEPLATE TO 6201087002
Description : NAMEPLATE TO 6201087002()
Specification : 172.87.245-6
C
Estab
6) INSCRIPTION PLATE TO 6201087064
Description : INSCRIPTION PLATE TO 6201087064()
Specification : A.172.87.245-6
C
Estab
7) ASSY COOLING FAN TO 6204096112
Description : ASSY COOLING FAN TO 6204096112()
Specification : V548.0125.0108
C
Estab
8) FAN VENTILATING NO 2MK1 LU 115022 TO 6204640122
Description : FAN VENTILATING NO 2MK1 LU 115022 TO 6204640122()
Specification : 175868FV
C
Estab
9) JUMPER TO 6206002009
Description : JUMPER TO 6206002009()
Specification : 175.71.014
C
Estab
10) NAME PLATE TO 6206002021
Description : NAME PLATE TO 6206002021()
Specification : 172.71.056
C
Estab
11) JUMPER TO 6206002029
Description : JUMPER TO 6206002029()
Specification : 172.71.066
C
Estab
12) JUMPER TO 6206002030
Description : JUMPER TO 6206002030()
Specification : 172.71.067
C
Estab
13) NAME PLATE TO 6206002034
Description : NAME PLATE TO 6206002034()
Specification : 172.71.107
C
Estab
14) NAME PLATE TO 6206109066
Description : NAME PLATE TO 6206109066()
Specification : 172.11.128
C
Estab
15) NAME PLATE TO 6206305297
Description : NAME PLATE TO 6206305297()
Specification : 175.33.263
C
Estab
16) CLAMP WITH NAME PLATE ASSY TO 6206501041
Description : CLAMP WITH NAME PLATE ASSY TO 6206501041()
Specification : 172.70.111CB
C
Estab
17) CONTACT ASSY TO 6206501065
Description : CONTACT ASSY TO 6206501065()
Specification : 172.70.174CB
C
Estab
18) PLUG SOCKET ASSY TO 6206501112
Description : PLUG SOCKET ASSY TO 6206501112()
Specification : 175.70.011CB-1
C
Estab
19) FAN ASSY TO 6206501114
Description : FAN ASSY TO 6206501114()
Specification : 175.70.024CB
C
Estab
20) JUMPER ASSY TO 6206501140
Description : JUMPER ASSY TO 6206501140()
Specification : 175.70.163CB
C
Estab
21) INSTRUCTION PLATE TO 6206501331
Description : INSTRUCTION PLATE TO 6206501331()
Specification : 172.70.563
C
Estab
22) INSTRUCTION PLATE TO 6206501332
Description : INSTRUCTION PLATE TO 6206501332()
Specification : 172.70.564
C
Estab
23) PLUG TO 6206501338
Description : PLUG TO 6206501338()
Specification : 172.47.229
C
Estab
24) SENDING UNIT D 20 TO 6206501521
Description : SENDING UNIT D 20 TO 6206501521()
Specification : D20.000CB
C
Estab
25) NAME PLATE TO 6206501527
Description : NAME PLATE TO 6206501527()
Specification : 432.71.176
C
Estab
26) COWL TO 6206501549
Description : COWL TO 6206501549()
Specification : 307.201
C
Estab
27) FAN BLADE TO 6206501550
Description : FAN BLADE TO 6206501550()
Specification : 597.002
C
Estab
28) FAN WITH BRACKET TO 6206502007
Description : FAN WITH BRACKET TO 6206502007()
Specification : 172.71.022CB-4
C
Estab
29) FAN WITH BRACKET TO 6206502023
Description : FAN WITH BRACKET TO 6206502023()
Specification : 172.71.074CB
C
Estab
30) PANEL TO 6206502036
Description : PANEL TO 6206502036()
Specification : 166.26.122CB-ACB
C
Estab
31) NAME PLATE TO 6206502075
Description : NAME PLATE TO 6206502075()
Specification : 172.71.195
C
Estab
32) NAME PLATE TO 6206502087
Description : NAME PLATE TO 6206502087()
Specification : 175.71.008
C
Estab
33) COVER TO 6206502102
Description : COVER TO 6206502102()
Specification : 166.26.161
C
Estab
34) NAME PLATE TO 6206503018
Description : NAME PLATE TO 6206503018()
Specification : 172.71.052-6
C
Estab
35) JUMPER ASSY TO 6206504151
Description : JUMPER ASSY TO 6206504151()
Specification : 172.73.025CBCB
C
Estab
36) EXTERNAL POWER SUPPLY SOCKET ASSY TO 6206591131
Description : EXTERNAL POWER SUPPLY SOCKET ASSY TO 6206591131()
Specification : 172.70.309CBCB
C
Estab
37) CONNECTOR ASSY TO 6206591132
Description : CONNECTOR ASSY TO 6206591132()
Specification : 172.70.310CBCB
C
Estab
38) NAME PLATE TO 6206591175
Description : NAME PLATE TO 6206591175()
Specification : 172.70.622
C
Estab
39) SGD NAME PLATE TO 6206801945
Description : SGD NAME PLATE TO 6206801945()
Specification : V572.0175.2045
C
Estab
40) NAME PLATE TO 6206811077
Description : NAME PLATE TO 6206811077()
Specification : 172.71.216
C
Estab
41) NAME PLATE TO 6206811303
Description : NAME PLATE TO 6206811303()
Specification : 172.71.189
C
Estab
42) JUMPER ASSEMBLY TO 6206902810
Description : JUMPER ASSEMBLY TO 6206902810()
Specification : CG10.1C.400CB
C
Estab
43) NAME PLATE TO 6207002019
Description : NAME PLATE TO 6207002019()
Specification : OHE/02/LH-DB
C
Estab
44) BRUSH ASSEMBLY TO 6207502001
Description : BRUSH ASSEMBLY TO 6207502001()
Specification : 995-208CB
C
Estab
45) NAME PLATE TO 6207503002
Description : NAME PLATE TO 6207503002()
Specification : HVF-172.71.052-5
C
Estab
46) PLUG ASSY TO 6207902083
Description : PLUG ASSY TO 6207902083()
Specification : WP.175.84Mcb
C
Estab
Category : p
4829
BHARAT ELECTRONICS LIMITED
MRTB00630A
Download
1Ordnance Factory Medak
Name
Specification
Use
Status
1) INSTANT FIRE DETECTION AND SUPPRESSION SYSTEM
Description : INSTANT FIRE DETECTION AND SUPPRESSION SYSTEM()
Specification : INSTANT FIRE DETECTION AND SUPPRESSION SYSTEM FOR BMP II & VARIANTS / AS PER ENCLOSURES
E
Estab
Category : ddp
4830
SOUTHERN MAGNESIUM & CHEMICALS LIMITED
HYDSO1244F
Download
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) MAGNESIUM POWDER GR.B
Description : MAGNESIUM POWDER GR.B()
Specification : MAGNESIUM POWDER GR.B, PARTICLE SIZE BS SIEVE NO. AS PER CS-5035-A (A) 30 BSS = ALL PASS. (B) 44 BSS = NOT MORE THAN 15% RETAINED. (C) 100 BSS = NOT MORE THAN 15% PASS. (D) 120 BSS = ALL RETAINED. APPARENT DENSITY: 0.65 TO 0.85 g/ml & OT
R
Estab
Category : p
4831
ASHOKA ENGINEERING COMPANY
AAPPG4048P
Download
1Ordnance Factory Medak
Name
Specification
Use
Status
1) EXTINGUISHER FIRE HALON 1211 BCF 1
Description : EXTINGUISHER FIRE HALON 1211 BCF 1()
Specification : EXTINGUISHER FIRE HALON 1211 BCF 1
E
Estab
Category : p
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) 3 5 KG SQUIB OPERATED CYLINDER RD TO 6204295050
Description : 3 5 KG SQUIB OPERATED CYLINDER RD TO 6204295050()
Specification : CEES/MBT/DO200/RD
C
Estab
2) 2 KG WHEEL VALVE OPERATED TYPE RD TO 6204295052
Description : 2 KG WHEEL VALVE OPERATED TYPE RD TO 6204295052()
Specification : CEES/MBT/DO100/RD
C
Estab
3) 2 KG PORTABLE CYLINDER RD TO 6204295054
Description : 2 KG PORTABLE CYLINDER RD TO 6204295054()
Specification : CEES/MBT/D1200/RD
C
Estab
4) RECTIFIED FFC TO 6206917031
Description : RECTIFIED FFC TO 6206917031()
Specification : 172.82.054SB-B/RT
C
Estab
Category : p
4832
BOMBAY WELL PRINT INKS PVT. LTD.
NGPB00772C
Download
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY
Description : PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY()
Specification : PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH, SEMI GLOSSY TO SPECN: IS.138-2018 (4TH REV.) (TO BE SUPPLIED IN 500 ML PACK)
R
Estab
Category : p
4833
BHARAT WIRE ROPES LTD
AABCB2180N
Download
1Ordnance Factory Medak
Name
Specification
Use
Status
1) WIRE ROPE 765 100 CD104
Description : WIRE ROPE 765 100 CD104()
Specification : WIRE ROPE 765 100 CD104
C
Estab
Category : p
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) TOWING ROPE ASSY TO 6206008864
Description : TOWING ROPE ASSY TO 6206008864()
Specification : 172.91.368CBCB
C
Estab
Category : p
4834
Premier Sealing Products
ABBPR2616P
Download
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) OIL SEAL AGB Pt No X2702200
Description : OIL SEAL AGB Pt No X2702200()
Specification : OIL SEAL AGB Pt No X2702200
C
Estab
2) OIL SEAL X2701400V1
Description : OIL SEAL X2701400V1()
Specification : OIL SEAL-AGB, Pt. no. X2701400V1
C
Estab
3) OIL SEAL Pt No F2701400V1
Description : OIL SEAL Pt No F2701400V1()
Specification : OIL SEAL, Pt No F2701400V1
C
Estab
4) OIL SEAL Pt No F2752700
Description : OIL SEAL Pt No F2752700()
Specification : OIL SEAL, Pt No F2752700
C
Estab
5) SHAFT SEAL PT No X2703400
Description : SHAFT SEAL PT No X2703400 B()
Specification : SHAFT SEAL, PT.NO. X2703400
C
Estab
6) SHAFT SEAL Pt No X2703500 B
Description : SHAFT SEAL Pt No X2703500 B()
Specification : SHAFT SEAL, Pt No X2703500B
C
Estab
7) SHAFT SEAL Pt No X2703600
Description : SHAFT SEAL Pt No X2703600()
Specification : SHAFT SEAL, Pt No X2703600
C
Estab
8) SHAFT SEAL X2703800V2
Description : SHAFT SEAL X2703800V2()
Specification : SHAFT SEAL, Pt. No. X2703800V2
C
Estab
Category : p
4835
Mahem Engineering Pvt. Ltd.
AABCM3228J
Download
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) SHIFT CYLINDER BODY F 1830942 V1
Description : SHIFT CYLINDER BODY F 1830942 V1()
Specification : SHIFT CYLINDER BODY PT. NO. F-1830942-V1
C
Estab
2) SHIFT CYLINDER BODY X1831042 V1
Description : SHIFT CYLINDER BODY X1831042 V1()
Specification : E-SHIFT CYLINDER BODY PT. NO. X1831042-V1
C
Estab
Category : p
4836
Millennium Forging Pvt. Ltd.
AHMM04877F
Download
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) FORG FOR OUT PUT SHAFT REAR
Description : FORG FOR OUT PUT SHAFT REAR()
Specification : FORGING FOR OUT PUT SHAFT REAR STALLION BS-III VEHICLE, PART NO X3303311-3(R2)
C
Estab
2) FORG FOR ACTUATER
Description : FORG FOR ACTUATER()
Specification : FORGING FOR ACTUATER, DRG. No. Z-1802911(R1) PART NO. X1802911
C
Estab
Category : p
4837
Forge (India) Pvt. Ltd.
AAACF2805M
Download
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) FORG FOR GEAR ON LAY SHAFT GEAR LAY SHAFT
Description : FORG FOR GEAR ON LAY SHAFT GEAR LAY SHAFT()
Specification : FORG. FOR GEAR ON LAY SHAFT/GEAR LAY SHAFT, STLN- BS-III, PART NO. X1602611-3(R2)
C
Estab
2) FORG FOR STEERING LEVER BS3
Description : FORG FOR STEERING LEVER BS3()
Specification : FORG.FOR STEERING LEVER, PART NO.X3206711-3
C
Estab
3) FORG FOR GEAR INPUT HIGH BS 3
Description : FORG FOR GEAR INPUT HIGH BS 3()
Specification : FORG. FOR GEAR INPUT HIGH, STLN- BS-III, PART NO. X1601211-3(R1)
C
Estab
4) FORG FOR SPUR GEAR GEAR INPUT LOW
Description : FORG FOR SPUR GEAR GEAR INPUT LOW()
Specification : FORG. FOR GEAR INPUT LOW, STLN- BS-III, PT. NO. X1602411-3 (R1)
C
Estab
5) FORG DRIVING FLANGE
Description : FORG DRIVING FLANGE()
Specification : FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)
C
Estab
6) FORG FOR RING FOR OIL SEAL INNER
Description : FORG FOR RING FOR OIL SEAL INNER()
Specification : FORGING FOR RING FOR OIL SEAL INNER, DRG. No.F 0741111-3
C
Estab
7) FORG FOR RING FOR OIL SEAL OUTER
Description : FORG FOR RING FOR OIL SEAL OUTER()
Specification : FORGING FOR RING FOR OIL SEAL OUTER, DRG. No. F 0741011 -3
C
Estab
8) FORG FOR 4th GEAR ON LAY SHAFT
Description : FORG FOR 4th GEAR ON LAY SHAFT()
Specification : FORG.FOR 4th GEAR ON LAY SHAFT, STLN- BS-III, PART NO. F1607211-3
C
Estab
9) FORG FOR CONSTANT MESH GEAR LAY SHAFT
Description : FORG FOR CONSTANT MESH GEAR LAY SHAFT()
Specification : FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3
C
Estab
10) FORG FOR SLEEVE STLN BS III F3427015 3 R1
Description : FORG FOR SLEEVE STLN BS III F3427015 3 R1()
Specification : FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S
C
Estab
11) FORG FOR SLEEVE STLN BS III F3424215 3 R1
Description : FORG FOR SLEEVE STLN BS III F3424215 3 R1()
Specification : FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)
C
Estab
12) FORG FOR OUTPUT FLANGE BS 3
Description : FORG FOR OUTPUT FLANGE BS 3()
Specification : FORG FOR OUT PUT FLANGE, STLN- BS-III, PT. NO. F1402311-3
C
Estab
13) FORG FOR INPUT SHAFT PINION
Description : FORG FOR INPUT SHAFT PINION()
Specification : FORG.FOR INPUT SHAFT STLN- BS-III, PART NO. DRG.NO. F3311611-3
C
Estab
14) FORG FOR REVERSE IDLER GEAR BS 3
Description : FORG FOR REVERSE IDLER GEAR BS 3()
Specification : FORG FOR REVERSE IDLER GEAR , STLN- BS-III, PT. NO. F8A02611-3
C
Estab
15) FORG FOR 4th GEAR ON MAIN SHAFT
Description : FORG FOR 4th GEAR ON MAIN SHAFT()
Specification : FORG.FOR 4th GEAR ON MAIN SHAFT, STLN- BS-III,PART NO./DRG.NO.F1668911-3
C
Estab
Category : p
4838
Anod Plasma Spray Limited
KNPA00370G
Download
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Chromium Plating in Obturating Spindle[63]()
Specification : Drg. No. 3053054
C
Nonestab
Category : p
4839
THE ARASAN ALUMINIUM INDUSTRIES (P) LTD.
AAACT6771E
Download
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) ALUMINIUM POWDER (LIGHT)GR.1
Description : ALUMINIUM POWDER (LIGHT)GR.1()
Specification : ALUMINIUM POWDER (LIGHT) GR.1 TO SPCN JSS:1370-04-2011 REV-1 5024-ME DT.01.08.11. (SIEVE SIZE:- 125 MICRON 98 +/- 2% )
R
Estab
Category : p
4840
SAI PLY PVT. LTD.
CALS18427D
Download
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PLYWOOD 6 MM(+/-6%) THICKNESS OF SIZE:(8 ft. X 4 ft.) MR GRADE, TYPE-AB, BRANDED QUALITY
Description : PLYWOOD 6 MM(+/-6%) THICKNESS OF SIZE:(8 ft. X 4 ft.) MR GRADE, TYPE-AB, BRANDED QUALITY()
Specification : SPECN. IS-303 (LATEST ISSUE).
P
Estab
Category : s
