Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
C
Estab
7) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC[70]()
Specification : MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC 5.56MM SK-JVPC-108 AS PER GIVEN SKETCH FROM PROVIDED MATERIAL SIZE 90X90X64MM BY SAF THROUGH L.F.NO.0412894855.
C
Estab
8) Blank for Piston extension stage VI[0132089519]()
Specification : BLANK FOR PISTON EXTENSION (STAGE VI) TO DRG.NO. SKJVPC 730 FOR JVPC 5.56MM. NOTE:-RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L.F.NO.0412001042.
R
Estab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Plate Armature in finished condition[70]()
Specification : Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
C
Nonestab
2) PIN AUTO SEAR FOR JVPC[70]()
Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017 00DB
C
Nonestab
3) Trigger Rear with Machining Route[70]()
Specification : Trigger Rear with Machining Route. Drg.No.0204-03-02-02-18-013-00DC
C
Nonestab
4) Link for JVPC[7012470234]()
Specification : LINK FOR JVPC 5.56MM DRG. NO.0204-03-02-18-30-001-00DF
Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
C
Nonestab
7) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC[70]()
Specification : MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC 5.56MM SK-JVPC-108 AS PER GIVEN SKETCH FROM PROVIDED MATERIAL SIZE 90X90X64MM BY SAF THROUGH L.F.NO.0412894855.
C
Nonestab
8) Blank for Piston extension stage VI[0132089519]()
Specification : BLANK FOR PISTON EXTENSION (STAGE VI) TO DRG.NO. SKJVPC 730 FOR JVPC 5.56MM. NOTE:-RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L.F.NO.0412001042.
R
Nonestab
9) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT[70]()
Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G)
C
Nonestab
10) Steel blank of Receiver plate Left and Right FOR MAG[01]()
Specification : AS PER DRG.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Latch Special in finished condition[70]()
Specification : Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
C
Nonestab
2) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT[70]()
Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G)
C
Nonestab
3) Steel blank of Receiver plate Left and Right FOR MAG[01]()
Specification : AS PER DRG.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Rod Front Spring Recoil for JVPC[70]()
Specification : Rod Front Spring Recoil for JVPC 5.56MM DRG. No. 204-03-02-00-06-003-00DD
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STUD COCKING HANDLE FOR CARBINE 5 56 MM[70]()
Specification : COCKING HANDLE TO DRG NO.AKC-08/8* FOR CARBINE5.56MM IN FINISHED CONDITION.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) LEVER CHANGE RIGHT FOR CARBINE 5 point 56MM[70]()
Specification : AS PER DRAWING
C
Nonestab
2) Bracket Foresight[70]()
Specification : BRACKET FORESIGHT TO DRG NO. AKC-02/5(IN FINISHED CONDITION FOR AMOGH 5.56MM.
C
Nonestab
3) CHANGE LEVER LEFT FOR CARBINE 5point56MM[70]()
Specification : CHANGE LEVER LEFT TO DRG NO. AKC-10/1/2 FOR CARBINE 5.56MM.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PLUNGER LEVER CHANGE FOR CARBINE 5 56 MM[70]()
Specification : PLUNGER LEVER CHANGE TO DRG NO.AKC-10/4 FOR CARBINE 5.56MM IN FINISHED CONDITION.
C
Nonestab
2) TRIGGER IN FINISHED CONDITION FOR CARBINE 5 56MM[70]()
Specification : TRIGGER TO DRG NO AKC 01/8 IN FINISHED CONDITION FOR CARBINE 5.56MM
C
Nonestab
3) PIN TRIGGER AND SAFETY SEAR IN FINISHED CONDITION FOR CARBINE 5 56 MM[70]()
Specification : PIN TRIGGER & SAFETY SEAR DRG NO AKC 01/13*FOR CARBINE 5.56 MM IN FINISHED CONDITION.
C
Nonestab
4) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM[70]()
Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM.
C
Nonestab
5) RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56[70]()
Specification : RETAINER TO DRG.NO.ARDE SK-2689/90 IN FINISHED CONDITION. DS CAT NO.1005-007824 DC(I)NO.26547-SA DT.24.11.2010
C
Nonestab
6) PLUNGER LOCK COVER FOR CARBINE 5 56 MM IN FINISHED CONDITION[70]()
Specification : PLUNGER LOCK COVER DRG NO AKC 01/7 FOR CARBINE 5.56 MM IN FINISHED CONDITION
C
Nonestab
7) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56[70]()
Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION.
C
Nonestab
8) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM[70]()
Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM.
C
Nonestab
9) SEAR SK 2689/239 SOFT COND.L5[70]()
Specification : SEAR AS PER DRG.NO. ARDE/SK-2689/239 IN SOFT CONDITION DS CAT NO 1005-007736 DC(1)26524 SA DT-16.07.10.,
20) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.[70]()
Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
C
Nonestab
21) TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10[70]()
Specification : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10
C
Nonestab
22) TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10[70]()
Specification : TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10
C
Nonestab
23) PIN PLUNGER LOCK BUTT FOR CARBINE 5 56MM IN FINISHED CONDITION[70]()
Specification : PIN PLUNGER LOCK BUTT TO DRG NO.AKC-13/7* FOR CARBINE 5.56MM IN FINISHED CONDITION.
C
Nonestab
24) PIN LOCKING PIN FIRING IN FINISHED CONDITION DS CAT NO 5315 010101[70]()
Specification : PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101.
C
Nonestab
25) PLUNGER DS CAT NO 1005 007901 IN FINISHED CONDITION FOR LMG 5 56[70]()
Specification : PLUNGER TO DRG. NO. ARDE SK- 2825/34,DS CAT NO. 1005-007901 DC(I) NO. 26954-SA, DT. 04/10/16 IN FINISHED CONDITION
C
Nonestab
26) PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56[70]()
Specification : PLUNGER PLATE SHOULDER REST TO DRG NO-ARDE/SK-2825/53 IN FINISHED CONDITION.DS DAT.NO.-1005-007902 DC(I) NO. 26950-SA,DTD.27.09.16
C
Nonestab
27) PLUNGER FOR AMOGH CARBINE 5 56[70]()
Specification : PLUNGER TO DRG. NO. ARDE SK 2689/87.IN FINISHED CONDITION DS CAT NO-1005-007827. DC(I)26547-SA,DTD-24.11.2010
C
Nonestab
28) REFLECTOR TO FOR CARBINE 5 56MM IN FINISHED CONDITION FOR CARBINE 5 56MM[70]()
Specification : REFLECTOR TO DRG NO.AKC-12/2 FOR CARBINE 5.56MM IN FINISHED CONDIION.
C
Nonestab
29) RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56[70]()
Specification : RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16
R
Nonestab
30) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56[70]()
Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH.
C
Nonestab
31) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56[70]()
Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH
C
Nonestab
32) RIVET SPACER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]()
Specification : RIVET SPACER DRG NO AKC 03/9 FOR CARBINE 5.56MM IN FINISHED CONDITION
C
Nonestab
33) SCREW FRONT SLING LOOP FOR LMG 5 56[70]()
Specification : SCREW FRONT SLING LOOP TO DRG. NO. ARDE SK- 3145/29,DS CAT NO. 5305-018855 DC(I) NO. 26950-SA, DT. 27.09.16
C
Nonestab
34) SCREW M C SLOTTED FOR LMG 5 56[70]()
Specification : SCREW M/C SLOTTED CSK HD M6 X 25-IS-1365 DULY PHOSPHATED
C
Nonestab
35) STUD LEVER CHANGE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56MM[70]()
Specification : STUD LEVER CHANGE TO DRG NO. AKC-10/1/1* (IN FINISHED CONDITION) FOR AMOGH 5.56MM.
C
Nonestab
36) TELESCOPIC ROD IN FINISHED CONDITION FOR AMOGH CARBINE 5 56MM[70]()
Specification : TELESCOPIC ROD TO DRG NO. AKC-09/4 IN FINISHED CONDITION FOR AMOGH 5.56MM.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CENTRAL PAWL AXIS for MAG[70]()
Specification : CENTRAL PAWL AXIS TO DS CAT NO. 5315-001512 DC(I) NO. 27015-SA DT- 16.01.17 IN FINISHED CONDITION.
C
Nonestab
2) EJECTOR for MAG 7 62MM[70]()
Specification : EJECTOR TO DS CAT NO. 1005-000548 DC(I) NO. 27011-SA DT- 14.01.2017 IN FINISHED CONDITION.
C
Nonestab
3) BUTTON FEED BOX for MAG[70]()
Specification : BUTTON FEED BOX DRG. NO DS CAT NO. 5340-016725 DC(I) NO. 27021-SA DT- 28.1.17. IN WHITE FINISH CONDITION..
C
Nonestab
4) DETENT STUD COCKING SLIDE for MAG[70]()
Specification : DETENT STUD COCKING SLIDE TO DS CAT NO. 5307-004452 DC(I) NO. 27020-SA DT- 28.01.17 IN FINISHED CONDITION.
C
Nonestab
5) BODY LOWER FEED MECH SLIDE DS CAT 1005-000475[70]()
Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02
C
Nonestab
12) BODY COVER RIGHT HAND AIR VERSION FOR MAG 7 62 MM[70]()
Specification : BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002
.
C
Nonestab
13) Body Upper Feed Mechanism Slide 1005-006823[70]()
Specification : As Per Drg.DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating
C
Nonestab
14) Body Trigger for MAG[61]()
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
C
Nonestab
15) Guide upper Left for MAG[70]()
Specification : .GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 27011-SA DT.14.01.17 IN FINISHED CONDITION.
C
Nonestab
16) BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645[70]()
Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15
C
Nonestab
17) FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION.[70]()
Specification : FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION.
C
Nonestab
18) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.[70]()
Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.
C
Nonestab
19) CENTRAL PAWL SPRING[70]()
Specification : CENTRAL PAWL SPRING DS CAT NO.5360-000514 DC(I) NO.27017-SA DT.27-01-17
C
Nonestab
20) BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.[70]()
Specification : BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.
C
Nonestab
21) FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION.[70]()
Specification : FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION. (MATERIAL WILL BE SUPPLIED BY S.A.F ON FREIGHT TO PAY AGAINST B/G.
C
Nonestab
22) BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.[70]()
Specification : BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.
C
Nonestab
23) FRONT AND REAR FEED PAWLS AXIS[70]()
Specification : FRONT AND REAR FEED PAWLS AXIS TO DS CAT NO. 5315-001513 DC(I) NO. 27015-SA DT- 16-01-17 IN FINISHED CONDITION.
25) CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.[70]()
Specification : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.
C
Nonestab
26) EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.[70]()
Specification : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.
C
Nonestab
27) CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING.[70]()
Specification : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. ( MATL.AL.FLAT 115X12MM FROM L.F.NO.0611530090 WILL BE SUPPL IED BY SAF ON B/G.)
C
Nonestab
28) COVER PLATE ACCESS TO DS CAT NO. 1005-006647 DC(I) NO. 25325-SA DT- 10.4.02 IN FINISHED CONDITION.[70]()
Specification : COVER PLATE ACCESS TO DS CAT NO. 1005-006647 DC(I) NO. 25325-SA DT- 10.4.02 IN FINISHED CONDITION.
C
Nonestab
29) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.[70]()
Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.
C
Nonestab
30) BUSHING BLANK, TO DS CAT NO. 5340-009974 DC(I) NO.25387-SA DT.07.06.02 IN F INISHED CONDITION.[70]()
Specification : BUSHING BLANK, TO DS CAT NO. 5340-009974 DC(I) NO.25387-SA DT.07.06.02 IN F INISHED CONDITION.
C
Nonestab
31) HANDLE COCKING SLIDE WITHOUT ANODIZING DRG.NO. SKM-1004[70]()
Specification : HANDLE COCKING SLIDE WITHOUT ANODIZING DRG.NO. SKM-1004
Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION
C
Nonestab
47) FORK CARRIER for MAG[72]()
Specification : FORK CARRIER TO DS CAT NO. 1005-000685 DC(I) NO. 22564-SA DT- 3.6.94 IN FINISHED CONDITION.
C
Nonestab
48) FRONT AND REAR FEED PAWLS SPRING for MAG[70]()
Specification : FRONT AND REAR FEED PAWLS SPRING TO DS CAT NO. 5360-000515 DC(I) NO. 27017-SA DT- 27.01.2017 IN FINSHED CONDITION.
C
Nonestab
49) HOUSING PIVOT for MAG[72]()
Specification : HOUSING PIVOT TO DS CAT NO. 1005-000666 DC(I) NO. 26182-SA DT- 03.04.06 IN FINISHED CONDITION.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STUD BAYONET FOR CARBINE 9 MM[70]()
Specification : STUD BAYONET DS CAT NO-5307-000965 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24785-SA-DT.26-07-2000.
C
Nonestab
2) SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER[70]()
Specification : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19
C
Nonestab
3) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION[70]()
Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009
C
Nonestab
4) SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION[70]()
Specification : SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97
C
Nonestab
5) LEVER EXTRACTOR FOR REVOLVER[70]()
Specification : LEVER EXTRACTOR DRG.NO.PH-1-7 IN FINISHED CONDITION D.A. NO. 05/18 DT. 07-03-18.
C
Nonestab
6) CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER THROUGH MIM ROUTE[70]()
Specification : CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08, THROUGH MIM ROUTE.
C
Nonestab
7) Blank for Ring CAP for Carbine 9mm[01]()
Specification : BLANK FOR RING CAP TO DRG.NO-SK-5183*.D.A. NO. 04/17 DT. 18.01.17
C
Nonestab
8) Body ForeSight drg .no. 1005-000896 for Carbine 9mm[70]()
Specification : BODY FORE SIGHT DS CAT NO 1005-000896 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)20697-SA-DATED-29-03-1990.,
C
Nonestab
9) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm[70]()
Specification : AS PER DRG.no. 1005-000977
C
Nonestab
10) SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM[70]()
Specification : SUPPORT BARREL DS CAT NO 1005-000891 IN FINISHED CONDITION COMPLETE. SMG 9MM CARBINE 1A1. DC (I) 26898-SA,DT.20-07-2016.
C
Nonestab
11) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE[70]()
Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided
13) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978[70]()
Specification : AS PER DRG.
C
Nonestab
14) PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM[70]()
Specification : PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1
C
Nonestab
15) LEVER LOCKING FOR CARBINE 9 MM[70]()
Specification : LEVER LOCKING(CISA-633)DS CAT NO-1005-006886 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)26900-SA DATED-20-07-2016.
C
Nonestab
16) BLANK FOR CASING BARREL FOR CARBINE 9MM[01]()
Specification : BLANK FOR CASING BARREL. DRG.NO-SK-5252.
C
Nonestab
17) EXTRACTOR TO DS CAT NO 5120 007853 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1[70]()
Specification : EXTRACTOR TO DS CAT. NO.5120-007853 D C(I) NO-26339-SA DT.21-05-07 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.
C
Nonestab
18) FLY OFF LEVER FOR STRIKER MECHANISM IN FINISHED CONDITION[70]()
Specification : FLY-OFF LEVER TO DRG.NO. NAD 7606/4 DT. 03 SEP 13 FOR STRIKER MECHANISM IN FINISHED CONDITION
C
Nonestab
19) Plunger DRG No. 1005-000832[70]()
Specification : As per Drg.
C
Nonestab
20) Bearing back sight pin[70]()
Specification : BEARING BACK SIGHT PIN,D S CAT NO-1005-000825 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)26877-SA-DT.27-06-16
C
Nonestab
21) SPG CATCH MAGAZINE 5360 000789 FOR CARBINE 9MM[70]()
Specification : PIN LOCKING TRIGGER MECH.D S CAT NO 1005-000904 9MM CARBINE FINISHED CONDITION (ICR NO 1080) DC NO. 26896-SA DT. 18/07/2016
C
Nonestab
23) Machining of CAP of 9MM Carbine in finished condition[70]()
Specification : Machining of CAP of 9MM Carbine in finished condition DS CAT No. 1005-000860 from I.C. Cap (Material will be supplied by SAF against B.G.)
C
Nonestab
24) Pin butt DS CAT No 5315 009110 in finished condition[70]()
Specification : PIN BUTT D S CAT NO-5315-009110 IN FINISHED CONDITION OF SMG9MM CARBINE 1A1.DC(I)-26908-SA DT.05.08.16
C
Nonestab
25) SET SCREW DSCAT NO 5305 005083 IN FINISHED CONDITION FOR CARBINE 9MM[70]()
Specification : SET SCREW,DSCAT NO. 5305-005083 IN FINISHED CONDITION D C (I) NO.26372-SA DT.16-08-2007
C
Nonestab
26) Screw catch magazine DS CAT No. 5305-005080 in finished conditon of SMG 9 MM Carbine[70]()
Specification : AS PER DRG.DS CAT No. 5305-005080
C
Nonestab
27) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER[70]()
Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11
C
Nonestab
28) STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06[70]()
Specification : DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06
C
Nonestab
29) BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.[70]()
Specification : BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.
C
Nonestab
30) SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007[70]()
Specification : SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007
C
Nonestab
31) BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99.[70]()
Specification : BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99.
C
Nonestab
32) PIN LEVER LOCKING D S CAT NO-1005-000871 IN FINISHED CONDITI ON OF SMG 9MM CARBINE 1A1.DC(I)26882-SA DT.02-07-16.[70]()
Specification : PIN LEVER LOCKING D S CAT NO-1005-000871 IN FINISHED CONDITI ON OF SMG 9MM CARBINE 1A1.DC(I)26882-SA DT.02-07-16.
C
Nonestab
33) PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.[70]()
Specification : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.
C
Nonestab
34) PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04.[70]()
Specification : PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04.
C
Nonestab
35) BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.[70]()
Specification : BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.
C
Nonestab
36) PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.[70]()
Specification : PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.
R
Nonestab
37) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.[70]()
Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.
C
Nonestab
38) PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.[70]()
Specification : PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.
C
Nonestab
39) PIN LEVER LOCKING CAP D S CAT NO-5315-002017 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26341-SA DT.01-06-2007[70]()
Specification : PIN LEVER LOCKING CAP D S CAT NO-5315-002017 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26341-SA DT.01-06-2007
C
Nonestab
40) PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.[70]()
Specification : PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.
C
Nonestab
41) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003[70]()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Nonestab
42) PIN SPRING STOP DS CAT NO 5315 002026 IN FINISHED CONDITION FOR CARBINE 9MM[70]()
Specification : PIN SPRING STOP DS CAT NO 5315-002026 DC(I)NO.24969 DATED 19-03-2001 IN FINISHED CONDITION
C
Nonestab
43) SCREW GRUB B A STEEL CONICAL POINTED DS CAT NO 5305 005079 FOR CARBINE 9MM[70]()
70) PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99[70]()
Specification : PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99
C
Nonestab
71) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION[70]()
Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION
C
Nonestab
72) SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER[70]()
Specification : SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09
C
Nonestab
73) EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.[70]()
Specification : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.
C
Nonestab
74) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION[70]()
Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681
C
Nonestab
75) Nut Extractor for Revolver[70]()
Specification : Nut Extractor for Revolver to Drg. No. PH-4-2 in finished Condition D.A. No. – 35/04, Dt. 09-04-04
C
Nonestab
76) RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56[70]()
Specification : RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16
R
Nonestab
77) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Nonestab
78) CENTRE PIN TO DS CAT NO 5315 009119 IN FINISHED CONDITION FOR CARBINE 9MM[70]()
Specification : CENTRE PIN TO DS CAT NO. 5315-009119 DC(I) NO. 26372-SA DT. 16-08-07 IN FINISHED CONDITION
C
Nonestab
79) PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE[70]()
Specification : PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
Specification : Rear Feed Pawl to DS CAT no. 1005-006638 DC(I) NO. 25321-SA, DT. 08-04-02 in finished condition
C
Nonestab
8) SECURING NUT GAS REGULATOR FOR MAG[70]()
Specification : DS CAT NO.5310-002662 DC(I) 25349-SA DT.30.4.02 (MATL.ST.RD.19.05 MM DIA GD.605M36 FROM L.F.NO.0283000019 WILL BE SUPPLIED BY S.A.F.ON B/G.)AS PER DRGAS PER DRG
Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99
C
Nonestab
11) RIVET SOLID FOR MAG[70]()
Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000
C
Nonestab
12) ROD CLEANING FOR MAG[71]()
Specification : ROD CLEANING 7.62MM BARREL GAS CYLINDER 1ATO DS CAT NO.1005-000358 DC (I) NO.23088-SA DT.19-9-95IN FINISHED CONDITION.,
C
Nonestab
13) PIN RETAINING CATCH FEED COVER IN FINISHED CONDITION DS CAT NO. 5315-001520, DC(I) NO. 26160-SA DATE 14/02/2006[70]()
Specification : PIN RETAINING CATCH FEED COVER IN FINISHED CONDITION DS CAT NO. 5315-001520, DC(I) NO. 26160-SA DATE 14/02/2006
C
Nonestab
14) SPLIT COLLAR GAS REGULATOR FOR MAG[70]()
Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION.
C
Nonestab
15) PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02[70]()
Specification : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G)
C
Nonestab
16) PIVOT COVER LATCHES SPRING FOR MAG[70]()
Specification : PIVOT COVER LATCHES SPRING TO DS CAT NO. 1005-000463 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G)
C
Nonestab
17) LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.[70]()
Specification : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.
Specification : DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION.
C
Nonestab
44) PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION[70]()
Specification : PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION
C
Nonestab
45) PIN RETAINING HANDLE COCKING SLIDE for MAG[70]()
Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION.
C
Nonestab
46) SLEEVE GAS REGULATOR FOR MAG[70]()
Specification : SLEEVE GAS REGULATOR TO DS CAT NO. 3120-004755 DC(I) NO. 25570-SA DT- 29.10.02
C
Nonestab
47) SIGHT REAR FOR MAG[70]()
Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION.
C
Nonestab
48) SLEEVE BOLT COVER IN FINISHED CONDITION[70]()
Specification : SLEEVE BOLT COVER IN FINISHED CONDITION DS CAT NO.1005-006624 DC (I) NO.26159-SA,DT.09-02-06 (MATL.ST.ROD 1/2" DIA GD.605M36 FROM L.F NO.0283001013/02830 00012 WILL BE SUP.BY.SAF .ON B/G.
C
Nonestab
49) REAR END OUTER TUBE RETURN SPRING FOR MAG[70]()
Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION.
54) Post Aiming MG MK 3 DS CAT No 1290x000258[71]()
Specification : Post Aiming No. MG MK-3 to DS CAT No. 1290-000258 DC(I) 24575-SA dt. 30.10.99 in finished condition
C
Nonestab
55) PIN FIRING for MAG[70]()
Specification : PIN FIRING,DS CAT NO.1005-006641 IN FINISHED CONDITION (MATERIAL TO BE ISSUED AGAINST BANK GUARANTEE) MAG 7.62 MM DC(I) NO. 25325-SA, DT.10.04.2002
C
Nonestab
56) PIN LOCATING SEAR SPRING for MAG[70]()
Specification : PIN LOCATING SEAR SPRING TO DS CAT NO. 5315-001541 DC(I) NO. 27013-SA DT- 14.01.17 IN FINISHED CONDITION.
C
Nonestab
57) PIN RETAINING COCKING STUD for MAG[70]()
Specification : PIN RETAINING COCKING STUD TO DS CAT NO. 5315-004848 DC(I) N0. 27013-SA DT- 14/01/17 IN FINISHED CONDITION.
C
Nonestab
58) PIN STRAIGHT HEADLESS FRONT SIGHT BAND for MAG[70]()
AMMUNITION CONTAINER BOX C-18 A/L (STEEL) TO DRG. PT. NO. ISV 282-A DC NO 35479-A DT.23-03-93 SPECN:-IA-1169 (n), DC 35576-A AIDE MEMORIE P/11
C
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CENTRAL TUBE ASSEMBLY WELDING FOR BOMB 250KG()
DRG. NO. TRD-2-1-2296
C
NOT ESTABLISHED
2) CATCH LOCK ASSY DRG.NO. IA-1053 4 CO()
CATCH LOCK ASSY AS PER DRG.NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 4 COMPONENTS (ONE EACH) 1 CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP
C
Non Established
Category : P
Grade : III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARTG CLIP FOR 76 62 SRGM LF 9911357314[99]()
Specification : CARTG. CLIP ASSY TO DRG.NO. TRD-2-1-1992.
C
Nonestab
2) DEPTH CHARGE MK II MOD 3 EMPTY LF 9911353534[99]()
Specification : DEPTH CHARGE MK-11 MOD-3 EMPTY TO DRG NO NAD/7502/1 R/NO 2 DT 19/12/90 UNDER NOTE 5 SPECN AMENDED ARD-2165 SPECN:NA-SPECIFICATION U-2D
C
Nonestab
Category : p
Grade : Grade III
Size :
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Catch 6AL()
As per Drg. & Specification.
C
Not Established
2) Vertical Channel 6AL()
As per Drg. & Specification.
C
Not Established
3) Vertical Channel 13A()
As per Drg. & Specification.
C
Not Established
4) Catch C44A()
As per Drg. & Specification.
C
Not Established
5) Carrying Link C43A()
As per Drg. & Specification.
C
Not Established
6) Assy. Handle C43A()
As per Drg. & Specification.
C
Not Established
7) Plate Engaging H2A()
As per Drg. & Specification.
C
Not Established
8) Plate for Hinge H2A()
As per Drg. & Specification.
C
Not Established
Category : DP
Grade : III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) WASHER AS PER DRG NO TRD 1 1 3223 LF 9911358675
Description : WASHER AS PER DRG NO TRD 1 1 3223 LF 9911358675()
Specification : WASHER AS PER DRG MKTA 754152 003 TRD 1 1 3223 ALT
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) RING AS PER DRG NO TRD 2 1 3226 LF 2013999927
Description : RING AS PER DRG NO TRD 2 1 3226 LF 2013999927()
Specification : RING AS PER DRG NO MKTA 754176 001 TRD 2 1 3226 LF 2013999927
C
Nonestab
2) Washer as per drawing no TRD 1 1 3222 lf 9911358672
Description : Washer as per drawing no TRD 1 1 3222 lf 9911358672()
Specification : Washer as per drawing number MKTA 754152.002/ TRD - 1.1.3222
C
Nonestab
3) Gasket as per DRG No 1 1 3218 lf 9911358664
Description : Gasket as per DRG No 1 1 3218 lf 9911358664()
Specification : Gasket as per drawing number TRD- 1.1.3218
C
Nonestab
4) WASHER AS PER DRG NO MKTA 754152 003 LF 9911358670
Description : WASHER AS PER DRG NO MKTA 754152 003 LF 9911358670()
Specification : WASHER AS PER DRG NO MKTA 754152 003 TRD 1 1 3223
C
Nonestab
5) WASHER AS PER DRG NO MKTA 754152 001 LF 9911358668
Description : WASHER AS PER DRG NO MKTA 754152 001 LF 9911358668()
Specification : WASHER AS PER DRG NO MKTA 754152.001/TRD 1.1.3221
C
Nonestab
6) Contact as per TRD No 2 1 3228 lF 9911358674
Description : Contact as per TRD No 2 1 3228 lF 9911358674()
Specification : Contact as per drawing number MKTA 725115.001/ TRD- 2.1.3228
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141156252 HOUSING WITH PIN PT.DRG.NO.IQX85 SA[61]()
Specification : HOUSING WITH PIN
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) HOUSING WITH PIN FINISHED FOR DET L F 9911358156
Description : HOUSING WITH PIN FINISHED FOR DET L F 9911358156()
Specification : HOUSING WITH PIN DRG.PT NO.IQX-85 SA.DC 36709 A, DATE.08-09-2000.
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SET OF CONTAINER 3YAK22 AND PALLET 3YAK LF 9911358583[99]()
Specification : SET OF CONTAINER 3YAK22 & COLLAPSIBLE 3YAK23. ONE SET CONSIST OF 20 NUMBER OF CONTAINER 3YAK22 & 1 NUMBER OF COLLAPSIBLE PALLET 3YAK23
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SLIDING DISC PART NO 6416336 LF 9911358402
Description : SLIDING DISC PART NO 6416336 LF 9911358402()
Specification : SLIDING DISC PART NO.6416336 TO OEM DRG.NO.304101511/ TRD.DRG.NO 1.2.2427
R
Nonestab
2) SLIDING DISC PART NO 6413413 LF 9911358440
Description : SLIDING DISC PART NO 6413413 LF 9911358440()
Specification : SLIDING DISC PART NO.6413413 TO OEM DRG.NO.304052464/ TRD.DRG.NO.1.2.2627
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PACKING RING DRG 3 027321 DET 22 LF 9911357213
Description : PACKING RING DRG 3 027321 DET 22 LF 9911357213()
Specification : PACKING RING DRG. 3-027321 DET-22
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6570160000 BOX G 70 MK-1 (STEEL) OLIVE GREEN.[65]()
Specification : SPECN. NO. IA 1169
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) box g 70 MK1 LA LF 6570160000
Description : box g 70 MK1 LA LF 6570160000()
Specification : BOX G-70 MK1/ LA LF 6570160000
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) KEY AMMUNITION 39 A[61]()
Specification : KEY AMMUNITION 39 A TO DESIGNER REF NO:CIA/AMN/2208 DRG PART NO.IUX 144A, DC NO.35916-A, DT.21.02.95 TO SPECN. CQA (A) 1817(t) DC 37096-A, DT.06.03.2007.
Specification : AMMUNITION CONTAINER BOX B-9A STEEL TO DESIGNER'S REF: ARDE-2174, SHEET NO.3 PART NO.ISV 553A, DC 35907-A, SPECN IA 1169(n) DC 35576-A BOXES TO BE PAINTED AS PER DRG. WITH PAINT OF SHADE OLIVE GREEN (ISC 220) OF IS:5-2007 WITH 6TH REVI
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP()
Specification : CUP TO DRG.NO.9-04367/9 - - 104/38.350.189, DC NO.36309-A, DT.14.07.97
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SPRING 5209544 FOR HEAT-551[99]()
Specification : SPRING TO DRG NO.301100269.
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Metallic Container For Charge 9[25]()
Specification : METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Aluminium Container SER[25]()
Specification : ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Aluminium Container SER[25]()
Specification : ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.
R
Nonestab
2) Cylinder 12 A Steel for Ammunition Container Assembly 117 A[14]()
Specification : CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.
R
Nonestab
3) Metallic Container For Charge 9[25]()
Specification : METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.
R
Nonestab
4) METALLIC CONTAINER M4A2 SER[25]()
Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Aluminium Container SER[25]()
Specification : ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.
R
Nonestab
2) Metallic Container For Charge 9[25]()
Specification : METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.
R
Nonestab
3) METALLIC CONTAINER M4A2 SER[25]()
Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Aluminium Container SER[25]()
Specification : ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.
R
Nonestab
2) Metallic Container For Charge 9[25]()
Specification : METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.
R
Nonestab
3) METALLIC CONTAINER M4A2 SER[25]()
Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)
Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576
C
Estab
Category : p
Grade : 3
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) STRIKER SPRING DET 7 SPECN IA-780 K()
Specification : CQA (A)-1504
R
Estab
2) KEY AMMUNITION 19 B()
Specification : DESGN. REF. NO. CIA/AMN/1373 PT. NO. IUX 96A
1) NG Barrier of 125mm FSAPDS practice LF 9911358705
Description : NG Barrier of 125mm FSAPDS practice LF 9911358705()
Specification : NG Barrier of 125mm FSAPDS practice consist of. 1. NG barrier for 125mm FSAPDS/ Practice ammn. primary cartridge to spec./ drg. no. HEMRL/CCC/125/FS/2014-1
2. NG barrier for 125mm FSAPDS/ Practice ammn. secondary cartridge to spec./ drg
Specification : 7440201449 CABLE
Drg No.BG29-4S 250
CABLE TO DRG NO BG29-4S 250
C
Nonestab
2) CABLE BV29 050 FOR BV29 000 LF 7440201458[74]()
Specification : ATTACHED
C
Nonestab
3) LF 7449017051 HARNESS 3 AS PER DRAWING[74]()
Specification : HARNESS-3 AS PER DRAWING NO.ODC-OLF/CTI/T-90/053 WITHOUT ITEMS AT SL NO.2 & 3 OF PART LIST NO.ODC-OLF/CTI/T-90/053. NOTE:ITEM AT SL NO.1 OF PART LIST NO.ODC-OLF/CTI/T-90/053 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/VENDOR BE
C
Nonestab
4) LF 7449017052 HARNESS 4 AS PER DRAWING[74]()
Specification : HARNESS-4 AS PER DRAWING NO.ODC-OLF/CTI/T-90/054 NOTE:ITEMS AT SL NO.1&2 OF PART LIST NO.ODC-OLF/CTI/T-90/054TO BE SUPPLIED BY OLF & TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017052)
C
Nonestab
5) LF 7449017049 HARNESS 1 AS PER DRAWING[74]()
Specification : HARNESS-1 AS PER DRAWING NO. ODC-OLF/CTI/T-90/051(M1) WITHOUT ITEM AT SL NO.1 OF PART LIST NO.ODC-OLF/CTI/T-90/051(M1). NOTE:ITEM AT SL NO. 2 TO 10 & 12 TO 17 OF PART LIST NO. ODC-OLF/CTI/T-90/051(M1) TO BE SUPPLIED BY OLF & TO BE FITTED
C
Nonestab
6) LF 7449017050 HARNESS 2 AS PER DRAWING[74]()
Specification : HARNESS-2 AS PER DRAWING NO.ODC-OLF/CTI/T-90/052(M1) WITHOUTITEMS AT SL NO.2 TO 6 IN PART LIST NO.ODC-OLF/CTI/T-90/052(M1) NOTE:ITEMS AT SL NO.1 & 7 OF PART LIST NO.ODC-OLF/CTI/T-90/052(M1) TO BE SUPPLIED BY OLF & TO BE FITTED BY MANUFACT
C
Nonestab
7) LF 7449017053 VIDEO CABLE 1 AS PER DRG[74]()
Specification : VIDEO CABLE-1 AS PER DRG NO.ODC-OLF/CTI/T-90/72. NOTE:ITEMS AT SL NO. 1 TO 4 OF DRG.NO.ODC-OLF/CTI/T-90/72 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER /VENDOR BEFORE SUPPLY (LF 7449017053)
C
Nonestab
8) LF 7449017054 VIDEO CABLE 2 AS PER DRAWING[74]()
Specification : VIDEO CABLE-2 AS PER DRAWING NO.ODC-OLF/CTI/T-90/73 NOTE:ITEMS AT SL NO.1,3 & 4 OF DRG.NO.ODC-OLF/CTI/T-90/73 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017054)
C
Nonestab
9) LF 7449017055 LRF CABLE ASSY AS PER DRG[74]()
Specification : LRF CABLE ASSY AS PER DRG NO.ODC-OLF/CTI/T-90/055 NOTE:ITEMS AT SL NO. 1 & 2 OF DRG. NO.ODC-OLF/CTI/T-90/055 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/ VENDOR BEFORE DELIVERY (LF 7449017055)
C
Nonestab
10) LF 7425485618 BUNDLE CABLE ASSY[74]()
Specification : BUNDLE CABLE ASSY AS PER DRAWING NO OLF/R&D/-/207 (LF 7425485618)
C
Nonestab
11) COAXIAL CABLE BROWN 18 AWG 7 X 0 102 MM 82 FT 25 M MAKE CARLISLEIT MANUFACTURER PART NO MRG 179 0125 LF 9001121785[90]()
Specification : COAXIAL CABLE BROWN, 18 AWG. 7 X 0.102 MM, 82 FT, 25 M MAKE- CARLISLEIT MANUFACTURER PART NO. MRG 179.0125 (LF 9001121785)
C
Nonestab
12) VIDEO CABLE 1 AS PER DRAWING NO ODC OLF CTI T 90 72 LF 7440209484[74]()
Specification : VIDEO CABLE-1 AS PER DRAWING NO. ODC-OLF/CTI/T-90/72 (LF 7440209484)
C
Nonestab
13) HARNESS 1 AS PER DRAWING NO ODC OLF CTI T 90 051 LF 7440209486[74]()
Specification : HARNESS-1 AS PER DRAWING NO. ODC-OLF/CTI/T-90/051 (LF 7440209486)
C
Nonestab
14) HARNESS 2 AS PER DRAWING NO ODC OLF CTI T 90 052 LF 7440209487[74]()
Specification : HARNESS-2 AS PER DRAWING NO. ODC-OLF/CTI/T-90/052 (LF 7440209487)
C
Nonestab
15) HARNESS 3 AS PER DRAWING NO ODC OLF CTI T 90 053 LF 7440209488[74]()
Specification : HARNESS-3 AS PER DRAWING NO. ODC-OLF/CTI/T-90/053 (LF 7440209488)
C
Nonestab
16) HARNESS 4 AS PER DRAWING NO ODC OLF CTI T 90 054 LF 7440209489[74]()
Specification : HARNESS-4 AS PER DRAWING NO. ODC-OLF/CTI/T-90/054 (LF 7440209489)
1) Sleeve In Finish Condition for Striker Mechanism[70]()
Specification : Sleeve Drawing No. NAD-7606/7 for Striker Mechanism No 8 MK-1 In Finish Condition.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Sleeve In Finish Condition for Striker Mechanism[70]()
Specification : Sleeve Drawing No. NAD-7606/7 for Striker Mechanism No 8 MK-1 In Finish Condition.
C
Estab
2) TRIGGER IN FINISHED CONDITION FOR CARBINE 5 56MM[70]()
Specification : TRIGGER TO DRG NO AKC 01/8 IN FINISHED CONDITION FOR CARBINE 5.56MM
C
Estab
3) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE[70]()
Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided
7) BODY COVER RIGHT HAND AIR VERSION FOR MAG 7 62 MM[70]()
Specification : BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002
.
C
Estab
8) Body ForeSight drg .no. 1005-000896 for Carbine 9mm[70]()
Specification : BODY FORE SIGHT DS CAT NO 1005-000896 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)20697-SA-DATED-29-03-1990.,
C
Estab
9) Body Cover with Integral Picatiny Rail for LMG Belt Fed[70]()
Specification : Body Cover with Integral Picatiny Rail LMG 7.62 MM Belt Fed as per Drg. No. ARDE/SK/108/005
C
Estab
10) CLOSING CUP for JVPC[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
13) BREECH BLOCK ASSEMBLY AS PER DS CAT NO. 1005-006625 DC(I) NO. 25277-SA, DT. 02.03.02[70]()
Specification : BREECH BLOCK ASSEMBLY AS PER DS CAT NO. 1005-006625 DC(I) NO. 25277-SA, DT. 02.03.02
C
Estab
14) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
R
Estab
15) Steel Blank for Plunger handle carrying FOR LMG 5 56[01]()
Specification : STEEL BLANK FOR PLUNGER HANDLE CARRYING TO DRG.NO-SK-5273.
C
Estab
16) Steel blank of Receiver plate Left and Right FOR MAG[01]()
Specification : AS PER DRG.
C
Estab
17) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Estab
18) Blank for Body Cover Drg. No. 23055A SKM-902*1[01]()
Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902*1,
C
Estab
19) CHANGE LEVER LEFT FOR CARBINE 5point56MM[70]()
Specification : CHANGE LEVER LEFT TO DRG NO. AKC-10/1/2 FOR CARBINE 5.56MM.
C
Estab
20) Machining of Cap back of 9 mm Carbine DS CAT No. 1005-000860[70]()
Specification : AS PER DRG.
C
Estab
21) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.[70]()
Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.
C
Estab
22) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99[70]()
Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99
1) RESINE HARDNER HY 951
Description : RESINE HARDNER HY 951()
Specification : RESINE HARDNER HY-951 AS PER DOC NO.-DRDL/TSQD/AK/023 REV-1 (8.3 PAGE NO.12) & IT'S AMENDMENT. AS PER BDL LETTER NO.BDL/O2/AK/EXPL/01 DATED 04.09.2013.
Specification : EPOXY RESIN LY-556 AS PER DOC NO. DRDL/TSQD/AK/023 REV.1 (8.2 PAGE NO.11)
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Itarsi
[ENR Registration]
Name
Specification
Use
Status
1) RESINE HARDNER HY 951
Description : RESINE HARDNER HY 951()
Specification : RESINE HARDNER HY-951 AS PER DOC NO.-DRDL/TSQD/AK/023 REV-1 (8.3 PAGE NO.12) & IT'S AMENDMENT. AS PER BDL LETTER NO.BDL/O2/AK/EXPL/01 DATED 04.09.2013.
1) St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.[01]()
Specification : St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC SK-JVPC-108[70]()
Specification : BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Piston Extension for JVPC[01]()
Specification : Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) St. Forging Plate Bottom to DRG No. SKM-283*2[01]()
Specification : St. Forging Plate Bottom to DRG No. SKM-283*2
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) FORGING RECEIVER GUIDE FRONT RIGHT for MAG[41]()
Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]()
Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),
R
Nonestab
2) STEEL FORGING FOR LEVER LOCKING FOR MAG[04]()
Specification : DRG. NO. SKM-303*5 MICRO-ETCH & NMIR TEST AS PER DRG.
C
Nonestab
3) ST FORGING BUFFER BODY FOR MAG[01]()
Specification : DRG. NO. SKM-304*1
C
Nonestab
4) STEEL FORGING BREECH BLOCK SLIDE FOR MAG[04]()
Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Cylinder Gas[01]()
Specification : Steel Forging Cylinder Gas SKM 306*6 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Barrel Extension Blank up to Stage V for JVPC[70]()
Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING HAMMER FOR JVPC[01]()
Specification : STEEL FORGING HAMMER FOR JVPC 5.56 MM AS PER DRG. NO. SK JVPC 969.
C
Nonestab
2) Steel Forging Block Gas for JVPC[01]()
Specification : STEEL FORGING BLOCK GAS FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6003
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING BLOCK REAR FOR LMG 5 56[03]()
Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17
C
Nonestab
2) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
3) STEEL FORGING TO FOR BLOCK FRONT OF MAG[01]()
Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM
R
Nonestab
4) BUTTON CATCH MAGAZINE FOR JVPC[70]()
Specification : BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-04-00-02-004-00DA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A[91]()
Specification : MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A
C
Nonestab
2) SEMI MACHINING OF 81 MM MORTAR BOMB FROM REAR PART FORGING GSF DRAWING NO M 10177A TO GSF DRAWING NO M 11611 INPUT MATERIAL ITEM CODE 6227100203[91]()
Specification : SEMI MACHINING OF 81 MM MORTAR BOMB FROM REAR PART FORGING GSF DRAWING NO M 10177A TO GSF DRAWING NO M 11611 INPUT MATERIAL ITEM CODE 6227100203
R
Nonestab
Category :
Grade : Grade III
Size :
M
4738
CHEMSDEAL INC. PVT LTD FORMERLY KNOWN AND REGISTERED AS GLOBAL MARKETING & PROJECTS
Mittal Chamber 2nd Floor 42 - Jaora Compound Indore Madhya Pradesh
PIN1 : 452001
Phone No. : 94250662882
Specification : SPCN.IS 229-1993 (THIRD REVISION ) REAFFIRMED 2014 WITH INITIALBOILING POINT (IBP) MINIMUM 75.0 DEG. CENTIGRADE ANDDISTILATION RANGE NOT MORE THAN 2.5 DEG. CELSIUS WHICHSHOULD INCLUDE 77.2 DEG. CELSIUS. ( MATERIAL SHOULD BEPACKED IN NEW G
R
Estab
2) SODIUM SULPHATE ANHYDROUS TECH GR A
Description : SODIUM SULPHATE ANHYDROUS TECH GR A()
Specification : SPECIFICATION-OFI/0023/SPN DT 26/08/1994 "GRADE C" MATERIAL SHAL BE IN POWDER FORM FREE FROM DIRT AND OTHER FOREIGN MATTER AND PACKED IN POLYTHENE LINED H.D.P.E.BAGS OF 50 KG EACH.THE STRENGTH OF LIME AS CALCIUM OXIDE BY MASS SHOULD BE BE
Specification : CARD BOARD DISCS TO DRG.NO 6388106MADE FROM BOARD GLAZED CALANDERED AMMN. 2 MM TO 2.20 MM THICK TO SPECH. JSS-8135-13:2014 REVI-3 DC NO.5257-ME DATED 18/06/2014 (1) MASS= 2250 PLUS-MINUS 225 GM/SQ.MTR. (2) ASH ON INCINERATION AT 800 DEG.C
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Itarsi
[ENR Registration]
Name
Specification
Use
Status
1) PAPER KRAFT AMMUNITION
Description : PAPER KRAFT AMMUNITION()
Specification : PAPER KRAFT AMMUNITION SIZE 48.2 CMX 63.4 CM GRADE 170 +/- 10 GMS. TO SPECIFICATION JSS/8135 - 017 -2002(REAFFURNED 2011) DC.NO.5016 -ME DT. 16.03.2011.
Specification : CARD BOARD DISCS TO DRG.NO 6388106MADE FROM BOARD GLAZED CALANDERED AMMN. 2 MM TO 2.20 MM THICK TO SPECH. JSS-8135-13:2014 REVI-3 DC NO.5257-ME DATED 18/06/2014 (1) MASS= 2250 PLUS-MINUS 225 GM/SQ.MTR. (2) ASH ON INCINERATION AT 800 DEG.C
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG
Description : 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG()
Specification : JSS 9310- 03: 2010
R
Estab
2) 1419828815 PAPER WHITE FINE
Description : 1419828815 PAPER WHITE FINE()
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
Specification : MOTHER GRAPHITE FOR TEM AS PER DRAWING NO .OFI/2001/GMP/65/7/2./R1
R
Estab
2) CONTROL MOULD FOR PINAKA
Description : CONTROL MOULD FOR PINAKA()
Specification : AS PER HEMRL DRAWING NO. HEMRL/SRP/PIN/CON/04.01 WITH SPECIFICATION SHEET.
R
Estab
3) MOULD FOR NASCHEM CHARGE
Description : MOULD FOR NASCHEM CHARGE()
Specification : AS PER DRG NO OFI/99/GMP/48 R2.MATERIAL- ALUMINIUM ALLOY HE-30 AND AS PER SPECIFICATION NO 37/ PROC / GMP DT 15/01/2008
R
Estab
4) SET OF CASTING MANDRELS
Description : SET OF CASTING MANDRELS()
Specification : SET OF CASTING MANDRELS(FRONT & REAR) FOR PINAKA , AS PER SPECIFICATION NO. 54/PINAKA/GMP/OFI DT. 01/09/2016.
R
Estab
5) GRAPHITE INSERT FOR TEM
Description : GRAPHITE INSERT FOR TEM()
Specification : AS PER DRAWING NO. OFI/2001/GMP/65/7/3. 2. LINER FOR RZ-61 FULL SCALE MOTOR AS PER DRAWING NO. OFI/2003/GMP/85 R1 MATERIAL: EPOXY + SILICA FABRIC (COLD CURED). 3. PYRO CARTRIDGE HOLDER FOR SPC(5B-29)AS PER SKETCH NO. 220 OF NAI JABALPUR.
Specification : MOTHER GRAPHITE FOR TEM AS PER DRAWING NO .OFI/2001/GMP/65/7/2./R1
R
Estab
2) CONTROL MOULD FOR PINAKA
Description : CONTROL MOULD FOR PINAKA()
Specification : AS PER HEMRL DRAWING NO. HEMRL/SRP/PIN/CON/04.01 WITH SPECIFICATION SHEET.
R
Estab
3) MOULD FOR NASCHEM CHARGE
Description : MOULD FOR NASCHEM CHARGE()
Specification : AS PER DRG NO OFI/99/GMP/48 R2.MATERIAL- ALUMINIUM ALLOY HE-30 AND AS PER SPECIFICATION NO 37/ PROC / GMP DT 15/01/2008
R
Estab
4) SET OF CASTING MANDRELS
Description : SET OF CASTING MANDRELS()
Specification : SET OF CASTING MANDRELS(FRONT & REAR) FOR PINAKA , AS PER SPECIFICATION NO. 54/PINAKA/GMP/OFI DT. 01/09/2016.
R
Estab
5) GRAPHITE INSERT FOR TEM
Description : GRAPHITE INSERT FOR TEM()
Specification : AS PER DRAWING NO. OFI/2001/GMP/65/7/3. 2. LINER FOR RZ-61 FULL SCALE MOTOR AS PER DRAWING NO. OFI/2003/GMP/85 R1 MATERIAL: EPOXY + SILICA FABRIC (COLD CURED). 3. PYRO CARTRIDGE HOLDER FOR SPC(5B-29)AS PER SKETCH NO. 220 OF NAI JABALPUR.
