List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4581 KHALSA ENGG. WORKS
87, SUBHASH ROAD HARJINDER NAGAR-II KANPUR U.P.
PIN1 : 208007
Phone No. : 9839964476
GSTIN : 09AACFK8758M2ZJ 		AACFK8758M

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SPINDLE REGULATOR FOR MAG Description : SPINDLE REGULATOR FOR MAG() Specification : SPINDLE REGULATOR TO DS CAT NO. 1005-007081 DC(I) NO. 26670-SA DT- 17.4.13 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SPRING PLUNGER REAR SIGHT LEAF Description : SPRING PLUNGER REAR SIGHT LEAF() Specification : SPG.PLUNGER REAR SIGHT LEAF PART NO.M-2117 IN FINISHED CONDITION DS CAT NO.5360-000522 DC(I)NO.26149-SA DT.22.01.06 C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) KNOB GAS REGULATOR SCREW FOR MAG Description : KNOB GAS REGULATOR SCREW FOR MAG() Specification : KNOB, GAS REGULATOR SCREW PART NO. 1012 TO DS CAT NO. 1005-000417 DC(I) NO. 25292-SA DT- 14.03.02 IN FINISHED CONDITION (I.C.TO BE SUPPLIED BY SAF) C Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) A4 5340 006721 BUCKLE WAIST ADJUSTABLE ADOPTER SLIDING BAR TYPE PTRM[2102064015]() Specification : SPECN.NO.IND/GS/1802 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]() Specification : DRAWING NO. : JSS 1670-05 : 2013 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SNAP HOOK QUICK EJECTOR FOR PTAM[2110069098]() Specification : ADRDE/1210(c) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) TOWING RING LARGE BPLCA[2010068064]() Specification : Drg. No. 1.3.01-06-01-(b) R Nonestab
2) TOWING RING SMALL FOR BPLCA[2010068065]() Specification : Drg. No. 1.3.01-06-01-(b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]() Specification : DRAWING NO. CQA(GS)/US/562 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) CANOPY RELEASE ASSEMBLY WITH WIRE LOOP[2110021012]() Specification : DRAWING NO. ADRDE/1233(a) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PLATE CURVED WITH HOLE[2110018006]() Specification : SPCN/DRG:ADRDE/1107(d) sheet no. 8 R Nonestab
2) QUICK RELEASE UNIT[2110071022]() Specification : SPECN.NO.: ADRDE/1369(a) DRD/26/98. R Nonestab
3) SWIVEL CONE WITH PLATE[2110071013]() Specification : DRG.NO.:ADRDE/1321(b) DRD/60/98. R Nonestab
4) NIV TRIANGULAR D RING[2010020005]() Specification : DRAWING NO. CQA(GS)/US/560 C Nonestab
5) BUCKLE ADRDE 1429 01[2110029012]() Specification : BUCKLE A.B.C DRG.NO. ADRDE/1429-01 R Nonestab
6) LOCK OCK WITH BUCKLE[2110069032]() Specification : ADRDE/1354. R Nonestab
7) ADJUSTABLE BUCKLE[2110071004]() Specification : DRG.NO.:ADRDE/1304 (a) DRD/46/98. R Nonestab
8) SHOULDER BUCKLE UPPER[2110071006]() Specification : DRG. NO.:ADRDE/1302 (a) DRD/44/98. R Nonestab
9) PIN ASSEMBLY[2010071032]() Specification : DRG.NO.ADRDE/PAS/2008/23 R Nonestab
10) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]() Specification : DRAWING NO. : JSS 1670-05 : 2013 R Nonestab
11) TRIANGULAR D RING[2110030008]() Specification : ADRDE/109(d) R Nonestab
12) INVERTED V[2110071034]() Specification : DRAWING NO. ADRDE/1359(b) R Nonestab
13) Vent Ring 63 mm Dia[2110068055]() Specification : Vent Ring 63 mm Dia 1.3.03-05-01 R Nonestab
14) Coil Spring for BP Hawk[2110025029]() Specification : 1.3.03-01-01(b) R Nonestab
15) Coil Spring BP SU30[2110025072]() Specification : ADRDE/1402-03-002 (a) Except that:- (i) Wire Dia=3.4+-0.1 mm (ii) Permanent set upto 3 mm. (iii) Length of coil spring= 360 +-8 mm. R Nonestab
16) Conical Spring Dia 220 M[2110025051]() Specification : MISC/RP/ADC-150/CSS/01 R Nonestab
17) Metal Components of PTAM[9911038378]() Specification : One set of metal components of PTAM as per Appendix-A. R Nonestab
18) Plate Stiffner[2110080005]() Specification : SPECN-ADRDE/1.6.01-01.07 R Nonestab
19) Device for Tightening Belt[2110090002]() Specification : SPECN. NO. – ADRDE/1.6.01.04-25 (Prov.) R Nonestab
20) Ring 14point5 mm Dia[2110080002]() Specification : SPECN-ADRDE/1.6.01.01.03-02 R Nonestab
21) WRENCH SIZE VARIOUS LIKE 22X24 32X36 etc and TOOLS[2110090010]() Specification : WRENCH SIZE VARIOUS (LIKE 22X24, 32X36 etc.) & TOOLS SET WITH METAL TOOL BOX 5 TIER SIZE = 21" X 8" X 8" 1- VARIOUS SZ OF SPANNERS SIZE 6mm to 36mm -GEDORE-1SET 2- HAMMER 500 GM-GEDORE--1 NO. 3- CUTTING PLA YER-GEDORE/TAPARIYA-1 NO. R Nonestab
22) RIP CORD WITH PIN for BP LCA[2110077029]() Specification : Drg. No. 1.3.01-11(b) R Nonestab
23) Spike[2110090007]() Specification : SPECN-ADRDE/1.6.01.04-29 (PROV.) R Nonestab
24) Hook for Rigging Lines Packing[2110090013]() Specification : ADRDE/1.6.01.04-31 (PROV.) & ADRDE/1.6.01.04-33 (PROV.) R Nonestab
25) LARGE PACKING ROD[2110090014]() Specification : ADRDE/1.6.01.04-32 (PROV.) R Nonestab
26) Clamp[2110029023]() Specification : ADRDE/1417. R Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) COVER for MAG Description : COVER for MAG() Specification : COVER TO DS CAT NO. 1005-000446 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION. C Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PULLEY FOR ROTATING CANOPY[2110068044]() Specification : SPECN:- ADRDE/1319(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PULLY RTU.[2110026012]() Specification : DRG. NO.ADRDE/1041A-2/SA-1 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) LAP STRAP ADJUSTABLE BUCKLE For Pilot Para Mirage Sea Harrier and Jaguar AC[2110075021]() Specification : DRG. NOo. ADRDE/1456(a) Except that :- Material for Spring : Steel Wire for Mechanic Grade-SL as per IS:4454 (Part-1) : 2001, sheet No.12 of 17. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SOCKET FOR HARNESS FOR PSM SERIES[2010068067]() Specification : DRG.NO.ADRDE/1387 (a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PULLEY FOR ROTATING CANOPY[2110068044]() Specification : SPECN:- ADRDE/1319(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) FEMALE COUPLING FOR CWL[2110075039]() Specification : DRG. NO. ADRDE/1344(b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PIN WITH PULLY[2110071016]() Specification : DRG. NO.:ADRDE/1300-G(b) DRD/33/98 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PULLEY[2101069001]() Specification : SPECN. NO. ADRDE/1159-A-2/SA-6(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PULLEY[2101069001]() Specification : SPECN. NO. ADRDE/1159-A-2/SA-6(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) U SHACKLE for PP PSU[2110019015]() Specification : DRG. NO-ADRDE/1380. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SHACKLE WITH NUT AND BOLT BLACK[2110077022]() Specification : DRG. NO. ADRDE/ 1348-G (b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) MALE CONNECTOR[2010071033]() Specification : ADRDE/PAS/2008/24(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) QUICK RELEASE LOCK TP WITH BUCKLE[2110019011]() Specification : DRG.NO.-ADRDE/PAS/2007/16. R Nonestab
2) METALLIC REEL[2110038026]() Specification : SPECN NO.ADRDE/786-SA-1(e) R Nonestab
3) Quick Release Connecting Lug Male for PP BMK41[2110064000]() Specification : DRAWING NO.: ADRDE/797(e) SHEET NO. 8. R Nonestab
4) Shoulder Adjustable Buckle ACPB CT[2110080015]() Specification : Specn No. ADRDE/194(a) R Nonestab
5) RIP Cord Handle Main[2110025079]() Specification : SPECN./DRG. No. 2.1.01.16-00. R Nonestab
6) RIP Cord Handle Reserve[2110025094]() Specification : SPECN./DRG. No. 2.1.01.18-00. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SHACKLE WITH PULLY[2110060001]() Specification : SPECN/DRG.NO: ADRDE/302(c). R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) BRIDDLE RING FOR B.P. PARA JAGUAR A/C[2110018001]() Specification : DRAWING NO. : ADRDE/269(c) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SHACKLE 'D' SHAPED LARGE[2110060002]() Specification : SPECIFICATION :DRAWING NO ADRDE/303(c). R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) ORK II for PP PSU[2110019016]() Specification : DRG NO.-ADRDE/1396. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SHACKLE D SHAPED SMALL[2110060015]() Specification : SPECIFICATION/DRAWING:ADRDE/304((b). R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) ROLLER FITTING[2110075019]() Specification : SPCN.NO.AS PER ADRDE/1446 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) DETACHABLE ALIGNMENT RING[2110071009]() Specification : DRG.NO.:ADRDE/1296-G(b) DRD/29/98. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) CONE BASE AND CONE TOP FOR PP BMK41[2110071031]() Specification : Drawing No. ADRDE/1367(b) and ADRDE/1320(b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) DETACHABLE SHROUD LINK[2110071001]() Specification : DETACHABLE SHROUD LINK R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SNAP HOOK STATIC LINE PTR M WITH SAFETY PIN[2110017018]() Specification : DRAWING NO JSS: 5340-05:2014 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) QUICK RELEASE LINK PAE BAG[2110018011]() Specification : SPCN.NO.ROV.DRG.NO.ADRDE/113(b) R Nonestab
2) Snap Hook Lanyard[2110025090]() Specification : Specn. No. 2.1.01-13-00. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SCREW GUARD TRIGGER BACK TO DRG NO 29P 0055 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG. NO.29P 0055 required for 0.315" Sporting Rifle C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) DRIFT AS PER DRG No K 9004 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 9004 WITH FIRM'S MATERIAL C Nonestab
2) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]() Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL C Nonestab
3) CLAMP HANDLE SUB ASSY TO DRG NO 30P 1310 REQD FOR 40mm MGL[70]() Specification : CLAMP HANDLE SUB ASSY. TO DRG. NO. 30P 1310 REQD. FOR 40mm MGL C Nonestab
Category :
Grade : Grade III
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BOLTS Description : BOLTS() Specification : FINISH MACHINING OF BOLT C Estab
2) BUSHING Description : BUSHING() Specification : AS PER DRG.NO.161-714 C Estab
3) BUSHING SLEEVE FOR MK II Description : BUSHING SLEEVE FOR MK II() Specification : BUSHING SLEEVE TO DRG NO 3120-105151 FOR MK-II SPARE C Estab
4) Cam Cylinder Description : Cam Cylinder() Specification : Rev Comp.Drg. No.-32-0104 C Estab
5) Catch Barrel Description : Catch Barrel() Specification : Rev Component Drg. No. 32-0105 C Estab
6) Catch Hammer Description : Catch Hammer() Specification : Rev Comp.Drg. No.- SK-01289 C Estab
7) CLEANING KIT Description : CLEANING KIT() Specification : AS PER DRG.NO.FGK/MISC/780 C Estab
8) MACHINE COMPONENTS Description : MACHINE COMPONENTS() Specification : STANDARD COMPONENTS FOR T-90 C Estab
9) MACHINING Description : MACHINING() Specification : FINISH MACHINING OF BRACKET C Estab
10) FIXING PIN 1185 Description : FIXING PIN 1185() Specification : FIXING PIN AS PER DRG.NO.176-1185 FOR SHARANG ORD C Estab
11) HAMMER TO DRG. NO. 32-0601 MK-III Description : HAMMER TO DRG. NO. 32-0601 MK-III() Specification : HAMMER TO DRG. NO. 32-0601 MK-III,MATERIAL BS 970 PT I 1983 GD:070 M-55(B.S 970 EN-9) ALT.MATERIAL: FROM I.C ROUTE I.C DRG NO.SK-5377R BS 3146 Pt.1-1974. TYPE CLASS-12 Gr.A. C Estab
12) Lever Cam Description : Lever Cam() Specification : As per FGK Drg.NO. PH 1/3 & FGK 32-0103 C Estab
13) LEVER EXTRACTOR Description : LEVER EXTRACTOR() Specification : FGK DRG. NO. PH-1-7 C Estab
14) LFG ORDNANCE COMPONENTS AS PER ANNEXURE "G" Description : LFG ORDNANCE COMPONENTS AS PER ANNEXURE "G"() Specification : LFG ORDNANCE COMPONENTS C Estab
15) LINER ILG 150 Description : LINER ILG 150() Specification : LINER DRG.NO.ILG-150 C Estab
16) LOCKING PLATE 1481M X Description : LOCKING PLATE 1481M X() Specification : LOCKING PLATE AS PER DRG NO-176-1481 FOR SHARANG ORDNANCE C Estab
17) WASHER Description : WASHER() Specification : WASHER SCREW FOR T-72 & T-90 C Estab
18) MAIN SPRING STRIP Description : MAIN SPRING STRIP() Specification : AS PER DRG.NO. 32-0110 C Estab
19) MACHINING ITEMS DIES/JIGS FIXTURES Description : MACHINING ITEMS DIES/JIGS FIXTURES() Specification : MISCELLANEOUS ITEMS FOR T-72 ORDNANCE C Estab
20) NEEDLE Description : NEEDLE() Specification : AS PER DRG.NO. 115-000211 C Estab
21) PIN Description : PIN() Specification : PIN STRAIGHT HEADLESS C Estab
22) PIN FIRING Description : PIN FIRING() Specification : FGK DRG. NO. SK-01244 C Estab
23) PIN STOP Description : PIN STOP() Specification : FGK DRG. NO. SK-1242 C Estab
24) PLATE BODY TO DRG. NO. 32-0501 MK-III Description : PLATE BODY TO DRG. NO. 32-0501 MK-III() Specification : PLATE BODY TO DRG. NO. 32-0501 MK-III MATERIAL:-BS 970 Pt.1: 1983 Gd. 070 M-55 (BS 970 EN-9), FINISH:-ELECTROSTATIC POWDER COATING AFTER ASSY. ALT MATERIAL FROM IC ROUTE:-BS 3146 PT.1 1974 TYPE CLASS-8. C Estab
25) PLUNGER DETENT Description : PLUNGER DETENT() Specification : PLUNGER DETENT DRG.NO.5340-015489 C Estab
26) PLUNGER PAWL Description : PLUNGER PAWL() Specification : FGK DRG. NO. 32-0-134 C Estab
27) REBOUND SLIDE Description : REBOUND SLIDE() Specification : AS PER DRG.NO. 32-0122 C Estab
28) REBOUND TRIGGER Description : REBOUND TRIGGER() Specification : AS PER DRG. NO.32-0132 MK-III C Estab
29) SCREW Description : SCREW() Specification : AS PER DRG.NO. 5305-003128 C Estab
30) Shield Description : Shield() Specification : Rev Comp.Drg. No.- SK-01287 C Estab
31) SPACER Description : SPACER() Specification : AS PER DRG.NO. 1015-000214 C Estab
32) Spring Catch Barrel Description : Spring Catch Barrel() Specification : As per FGK Drg.NO. PH 1-12/32-0112 C Estab
33) SPRING CATCH HAMMER Description : SPRING CATCH HAMMER() Specification : AS PER DRG.NO. 32-0606 C Estab
34) SPRING CATCH TRIGGER Description : SPRING CATCH TRIGGER() Specification : AS PER DRG.NO. 32-0704 C Estab
35) Spring Main Description : Spring Main() Specification : As per FGK Drg.No. 32-0106 C Estab
36) SPRING PAWL Description : SPRING PAWL() Specification : AS PER DRG.NO. 32-0133 C Estab
37) SPRING REBOUND SLIDE Description : SPRING REBOUND SLIDE() Specification : AS PER DRG.NO. 32-0127 C Estab
38) STOP CYLINDER Description : STOP CYLINDER() Specification : DRG NO 32-011 C Estab
39) STUD STOP CYLINDER Description : STUD STOP CYLINDER() Specification : FGK DRG. NO. PH PH-2-2 C Estab
40) TRIGGER TO DRG. NO. 32-0701 MK-III Description : TRIGGER TO DRG. NO. 32-0701 MK-III() Specification : TRIGGER TO DRG. NO. 32-0701 MK-III ALT VERSION 2 MATERIAL: BS 970 Pt.1: 1983 GD. 070 M-55 (BS 970 EN-9)/ALT.MTL.(I.C.)BS3146 PT.-1,1974 TYPE CLASS-8 ALT. MATERIAL FOR MIM COMPONENTS:MIM 4650. C:0.3-0.6%, NI:1.5-2.5%,Cr-0.5% MAX.,Si-0.5%, C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05 Description : PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05() Specification : PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05 C Estab
2) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
3) CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) Description : CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT)() Specification : DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) C Estab
4) NUT RETAINING HANDLE for MAG Description : NUT RETAINING HANDLE for MAG() Specification : NUT RETAINING HANDLE DS CAT NO. 5310 - 002660 DC(I) NO. 25349-SA DT. 30-04-02 C Estab
5) IC Knob Gas Regulator Screw Description : IC Knob Gas Regulator Screw() Specification : I C SKM-754*2 for Knob Gas Regulator Screw C Estab
6) SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION. Description : SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION.() Specification : SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4582 N. V. Enterprises
69/5 SITE NO-1 KIDWAI NAGAR kANPUR Uttar Pradesh
PIN1 : 208011
Phone No. : 2232799
GSTIN : 09AACFN7259C1Z8 		AACFN7259C

Download 		1) Small Arms Factory
Name Specification Use Status
1) TRIGGER MECHANISM ASSEMBLY FOR LMG[70]() Specification : TRIGGER MECHANISM ASSEMBLY FOR LMG 7.62 MM BELT FED DRG. NO. 1804 01 01 02 00 000 00DA. C Nonestab
2) Body Finished Through IC for Revolver Side Swing[70]() Specification : Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW. C Nonestab
Category :
Grade : Grade III
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Cam Cylinder Description : Cam Cylinder() Specification : Rev Comp.Drg. No.-32-0104 C Estab
2) FEEDER LEVER DRG.6380630 Description : FEEDER LEVER DRG.6380630() Specification : FEEDER LEVER DRG.6380630 C Estab
3) MACHINE COMPONENTS Description : MACHINE COMPONENTS() Specification : HONING STICK HOLDE FOR SUNNEN C Estab
4) MAIN SPRING SWIVEL MK-III Description : MAIN SPRING SWIVEL MK-III() Specification : AS PER FGK DRG.NO. 32-0121 C Estab
5) PIN Description : PIN() Specification : PIN AXIS CYLINDER AS PER DRG. NO. 32-0303 C Estab
6) PIN CATCH PIN SWIVEL HAMMER Description : PIN CATCH PIN SWIVEL HAMMER() Specification : FGK DRG. NO. PH -6-5 C Estab
7) PIN FIRING Description : PIN FIRING() Specification : FGK DRG. NO. SK-01244 C Estab
8) PLATE BODY TO DRG. NO. 32-0501 MK-III Description : PLATE BODY TO DRG. NO. 32-0501 MK-III() Specification : PLATE BODY TO DRG. NO. 32-0501 MK-III MATERIAL:-BS 970 Pt.1: 1983 Gd. 070 M-55 (BS 970 EN-9), FINISH:-ELECTROSTATIC POWDER COATING AFTER ASSY. ALT MATERIAL FROM IC ROUTE:-BS 3146 PT.1 1974 TYPE CLASS-8. C Estab
9) PLUNGER Description : PLUNGER() Specification : FGK DRG. NO. PH -1-24 C Estab
10) Shield Description : Shield() Specification : Rev Comp.Drg. No.- SK-01287 C Estab
11) STUD HAMMER Description : STUD HAMMER() Specification : FGK DRG. NO. PH -2-4 C Estab
12) STUD REBOUND Description : STUD REBOUND() Specification : AS PER DRG. NO. 32-0205 MK-III C Estab
13) STUD STOP CYLINDER Description : STUD STOP CYLINDER() Specification : FGK DRG. NO. PH PH-2-2 C Estab
14) STUD TRIGGER Description : STUD TRIGGER() Specification : FGK DRG. NO. PH -2-3 C Estab
15) SWIVEL BUTT SUB ASSEMBLY Description : SWIVEL BUTT SUB ASSEMBLY() Specification : AS PER DRG. NO. 32-1100 C Estab
16) Trigger Description : Trigger() Specification : As per FGK Drg.NO. 32-0701 MK-III C Estab
Category : s
Grade : 3
Size : S
4583 Sarang Auto Aeronautics Private Limited
B-62, MIDC Ambad MIDC Ambad Nasik Maharashtra
PIN1 : 422010
Phone No. : 2386494
GSTIN : 27AAMCS4801J1Z4 		NSKS11560D

Download 		1) Ordnance Factory Bhusawal
Name Specification Use Status
1) CYLINDER FOR METAL CASE[01]() Specification : CYLINDER FOR METAL CASE AS PER DRAWING NO. OFBH/SK/1460. THE ACCEPTANCE CRITERIA MUST BE COMPLIED AS PER ATTACHED ANNEXURE 'A' . THE SUPPLIER MUST PROVIDE/SUBMIT THE TEST CERTIICATE OBTAINED FROM NABL/GOVT. ACCREDATED LAB WITH SUPPLY C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) CYLINDER FOR METAL CASE[01]() Specification : CYLINDER FOR METAL CASE AS PER DRAWING NO. OFBH/SK/1460. THE ACCEPTANCE CRITERIA MUST BE COMPLIED AS PER ATTACHED ANNEXURE 'A' . THE SUPPLIER MUST PROVIDE/SUBMIT THE TEST CERTIICATE OBTAINED FROM NABL/GOVT. ACCREDATED LAB WITH SUPPLY C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) BRACKET CARTRIDGE FRONT FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) Handle with Handle Clip for Box C-53A[99]() Specification : DRG, NO.OFB/C/1564 E Nonestab
2) CARRYING LINK[99]() Specification : DRG.NO OFB/C/1540 E Nonestab
3) HANDLE AND HANDLE CLIP ASSEMBLY[99]() Specification : DRG, NO.OFB/C/1564 E Nonestab
4) HANDLE AS PER DRG. NO. OFB/C/1757[99]() Specification : AS PER O.F.BSL DRAWING/SPECIFICATION E Nonestab
5) BOTTOM CORNER PIECE FOR BOX C-53[99]() Specification : AS PER O.F.BHUSAWAL DRAWING E Nonestab
6) CATCH[99]() Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994. E Nonestab
7) BRACKET A-1 FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
8) BRACKET A-2 FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
9) CENTER PARTITION FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
10) BOTTOM FRAME FOR CARRIER 13A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
11) TOP FRAME FOR CARRIER 13A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
12) HINGE - AS PER DRG. NO. OFB/C/1565[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
13) Hinge[99]() Specification : Drg.No. OFB/C/1410-A E Nonestab
14) Bracket B-2 for Box C-53 A[99]() Specification : As per O.F.Bhusawal Drawing/Specification E Nonestab
15) ENGAGING PLATE FOR BOXH2A[99]() Specification : ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718. E Nonestab
16) BOTTOM SUPPORT PIECE FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
17) BRACKET CARTRIDGE REAR FOR BOX C53[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
18) BRACKET FOR AMMN. BOX SM 601C[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
19) PIECE PACKING FOR BOX SM 601[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
20) CATCH PLATE WITHOUT ASSLY. OF BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
21) CHANNEL - FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION C Nonestab
22) LID CORNER PIECE FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
23) ASSEMBLE SECURING PLATE/1545 BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
24) ANGLE PLATE VERTICAL AS PER DRG. NO. OFBH-CA-13-C-1969[99]() Specification : ANGLE PLATE VERTICAL FOR CARRIER 13A/16A AS PER DRG NO. OFBH-CA-13-C-1969 E Nonestab
25) HINGE WITH HINGE PIN ASSY FOR BOX H2A[99]() Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067 E Nonestab
26) PIECE PACKING `A'[99]() Specification : PIECE PAKING A AS PER REF. PART NO. ISV 1820 E Nonestab
27) PIECE PACKING 'B'[99]() Specification : AS PER DRG NO. OFB/C/1541 E Nonestab
28) BRACKET END FOR SHELL FOR BOX C-53A[99]() Specification : AS PER DRG. NO. OFB/C/1477 E Nonestab
29) BRACKET B-1 FOR BOX C-53A[99]() Specification : AS PER OFB DRG NO. OFB/C/1487 & ISV 2049 E Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) PLATE HOOK AS PER DRG. NO. OFB/C/1560[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
2) LINK HOLDING END FOR BOX H2A[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
3) BOLT & CUP FOR PRB DRUM[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
4) CATCH FOR BOX SM 171K, 651J, 642[07]() Specification : AS PER DRG./SPECIFICATION C Nonestab
5) BRACKET MIDDLE FOR BOX C-51A AND C52A[07]() Specification : BRACKET MIDDLE FOR BOX C-51A & BOX C-52A AS PER DRG.NO.OFB/C/1363,DET-12 & OFB/C/1364,DET-10 REF.DRG.NO.ISV-2033 DC 36629-A DATED 06/01/2000. E Nonestab
6) BRACKET CROSS FOR BOX C51A[07]() Specification : AS PER OFBH SPECIFICATION C Nonestab
7) PIECE PACKING END FOR BOX C-43[07]() Specification : PIECE PACKING END FOR BOX C-43 R Nonestab
8) PIECE PACKING BOTTOM BOX-C43A[07]() Specification : PIECE PACKING BOTTOM BOX-C43A R Nonestab
9) RIVET MS FLAT 4 X 10 MM[07]() Specification : RIVET MS FLAT 4 X 10 MM R Nonestab
10) HINGE PIN DRG. NO. OFB/C/700[07]() Specification : HINGE PIN DRG. NO. OFB/C/700 R Nonestab
11) BRACKET SIDE FOR BOX C-51A[07]() Specification : BRACKET SIDE FOR BOX C-51A R Nonestab
12) SUPPORT FOR BRACKET SIDE C-51A[07]() Specification : SUPPORT FOR BRACKET SIDE C-51A R Nonestab
13) BRACKET TOP FOR BOX C 51-A[07]() Specification : BRACKET TOP FOR BOX C 51-A R Nonestab
14) GUIDE ANGLE FOR BOX C-51A[07]() Specification : GUIDE ANGLE FOR BOX C-51A R Nonestab
15) STOPPER REAR FOR BOX C-51 A[07]() Specification : STOPPER REAR FOR BOX C-51 A R Nonestab
16) STRENGTHENING PLATE OFB/C/1546[07]() Specification : STRENGTHENING PLATE OFB/C/1546 R Nonestab
17) STRENGTHENING BAND OFB/C/1584[07]() Specification : STRENGTHENING BAND OFB/C/1584 R Nonestab
18) STAPLE FOR BOX SM 171 K[07]() Specification : STAPLE FOR BOX SM 171 K R Nonestab
19) HINGE FOR BOX SM 171 K 642 C[07]() Specification : HINGE FOR BOX SM 171 K 642 C R Nonestab
20) BIGGER PACKING PIECE BOX 642-C[07]() Specification : BIGGER PACKING PIECE BOX 642-C R Nonestab
21) SUB ASSEMBLY OF LINK & HANDLE[07]() Specification : SUB ASSEMBLY OF LINK & HANDLE R Nonestab
22) BRACKET FRONT (FOR SHELL) C-52[07]() Specification : BRACKET FRONT(FOR SHELL) C-52 R Nonestab
23) MIDDLE BRACKET (FRONT) C-52-A[07]() Specification : MIDDLE BRACKET (FRONT) C-52-A R Nonestab
24) BRACKET REAR FOR BOX C-52-A[07]() Specification : BRACKET REAR FOR BOX C-52-A R Nonestab
25) BIGGER BRACKET FOR BOX SM+-642-C[07]() Specification : AS PER OFBH DRG R Nonestab
26) SMALLER BRACKET FOR BOX SM-642-C[07]() Specification : AS PER OFBH DRG AND SPECIFICATION R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) Chock Wheel of Drg No ADRDE 1427 for AN 32 Platform[00]() Specification : Chock Wheel of Drg.No.ADRDE – 1427 for AN-32 Platform (Item Code:6245001427) C Nonestab
2) Belt Tightening Device of Drg No ADRDE 1424[00]() Specification : Belt Tightening Device of Drg. No. ADRDE-1424 (Item code: 6245001424) C Nonestab
3) APPROACH ROLLER ASSEMBLY FOR AN 32 PLATFORM AS PER DRAWING NO BS 0120 6245000120[62]() Specification : APPROACH ROLLER ASSEMBLY FOR AN-32 PLATFORM AS PER DRAWING NO. BS-0120 C Nonestab
4) ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG NO ADRDE 1408 FOR AN 32 PLATFORM 6245001408[62]() Specification : ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG.NO.ADRDE-1408 FOR AN-32 PLATFORM. C Nonestab
5) SHACKLE WITH PIN SHACKLE NO 15 OF DRG NO ADRDE 1410 FOR AN 32 PLATFORM 6245001410[62]() Specification : SHACKLE WITH PIN (SHACKLE NO. 15) OF DRG NO ADRDE -1410 FOR AN-32 PLATFORM C Nonestab
Category : p
Grade : Grade III
Size : S
4584 SHRI BALAJI ENTERPRISES
117/130, A-7, SARVODAYA NAGAR KANPUR U.P.
PIN1 : 208005
Phone No. : 9305707172 		ABUPD3750B

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STOP SCREW REARSIGHT CURSOR FOR MAG Description : STOP SCREW REARSIGHT CURSOR FOR MAG() Specification : DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION. C Estab
2) PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16. Description : PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16.() Specification : PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16. C Estab
3) Blade fore sight 32mk-IV Drg no. PHMK-IV-3-1-3 Description : Blade fore sight 32mk-IV Drg no. PHMK-IV-3-1-3() Specification : BLADE FORESIGHT DRG NO-PHMK-IV-3-1-3 IN FINISHED CONDITIONREQUIRED FOR REVOLVER MK-IV, C Estab
4) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES Description : TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES() Specification : R Estab
2) PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16. Description : PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16.() Specification : PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16. C Estab
3) Blade fore sight 32mk-IV Drg no. PHMK-IV-3-1-3 Description : Blade fore sight 32mk-IV Drg no. PHMK-IV-3-1-3() Specification : BLADE FORESIGHT DRG NO-PHMK-IV-3-1-3 IN FINISHED CONDITIONREQUIRED FOR REVOLVER MK-IV, C Estab
4) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
5) STOP SCR.REARSIGHT CURSOR MAG 7.62MM Description : STOP SCR.REARSIGHT CURSOR MAG 7.62MM() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
4585 POLY 'Q' ENTERPRISES,
10/324Y, BALAJI NAGAR, JEGATHALA ROAD, ARUVANKADU, THE NILGIRIS TAMIL NADU
PIN1 : 643202
Phone No. : 8940711989 		AAEAA4537F

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) ALKATHENE LINER Description : ALKATHENE LINER() Specification : BAG FILM POLYTHENE 500 GAUGE THICK AS PER CFA SKETCH No. 864 DT. 31-12-2014 (ATTACHED) R Estab
Category : dp
Grade : 3
Size : S
4586 VIJAY TIMBER INDUSTRIES
48, INDUSTRIAL ESTATE, PHASE-II, YAMUNA NAGAR, HARYANA
PIN1 : 135001
Phone No. : 01732-252585 		AAEFV2705P

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) UNIT LOAD FOR CH 8 AND 9 Description : UNIT LOAD FOR CH 8 AND 9() Specification : UNIT LOAD FOR 155 MM CHARGE 8 & 9 TO BOFORS DRG.No.4085565 AND 4085566 AND AS PER CFA DRG.No.13 S 002 INCORPORATING THE SUGGESTIONS OF CQA(A), KADKI, VIDE THEIR LETTER No.QA 17553/GEN/VIII DATED 30/03/1995. R Estab
Category : p
Grade : 3
Size : S
4587 PRESMET PRODUCTS
119/221 (2),(OLD NO.486-D), POKHARPUR, KANPUR - 208010 KANPUR UTTAR PRADESH
PIN1 : 208010
Phone No. : 0512-2400140
GSTIN : 09ABFPJ4157R1Z0 		ABFPJ4157R

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) AXIS CYLINDER NIRBHEEK Description : AXIS CYLINDER NIRBHEEK() Specification : AXIS CYLINDER NIRBHEEK C Estab
2) AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302 Description : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302() Specification : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302(IN FINISH C SPECN BS 970 PT.1:1983 GRADE 080 M40 C Estab
3) AXLE SHAFT (155mm) - (BOFORS) Description : AXLE SHAFT (155mm) - (BOFORS)() Specification : As per FGK DRG.161-706 C Estab
4) CYLINDER Description : CYLINDER() Specification : BLANK FOR CYLINDER C Estab
5) Cam Cylinder Description : Cam Cylinder() Specification : Rev Comp.Drg. No.-32-0104 C Estab
6) CAP FOR CONTACT ELECTRICAL AS PER DRG Description : CAP FOR CONTACT ELECTRICAL AS PER DRG() Specification : CAP FOR CONTACT ELECTRICAL AS PER DRG NO.1015-003201 C Estab
7) NUT, BOLTS, WASHERS Description : NUT, BOLTS, WASHERS() Specification : CASTLE NUT ILG 20/1 C Estab
8) Catch Barrel Description : Catch Barrel() Specification : Rev Component Drg. No. 32-0105 C Estab
9) Catch Hammer Description : Catch Hammer() Specification : Rev Comp.Drg. No.- SK-01289 C Estab
10) COVER & PLATE Description : COVER & PLATE() Specification : SECURING PLATE PIECE C Estab
11) CYLINDER SUB ASSY DRG.NO.32-0400. ALONGWITH ASSY.COMPONENTS DRG.NO.32-0401 Description : CYLINDER SUB ASSY DRG.NO.32-0400. ALONGWITH ASSY.COMPONENTS DRG.NO.32-0401() Specification : PROVIDE "TEST PIECE AS PER RELEVENT I.S. FOR MECH. TEST AT FGK C Estab
12) MACHINE COMPONENTS Description : MACHINE COMPONENTS() Specification : DISC AS PER DRG. NO. 161-471 C Estab
13) Extractor Description : Extractor() Specification : As per FGK Drg. NO. 32-0400 C Estab
14) FINISH MACHINE OF BREECH CARRIER Description : FINISH MACHINE OF BREECH CARRIER() Specification : AS PER DRG. NO. 2025298 C Estab
15) SCREW Description : SCREW() Specification : AS PER DRG.NO. 5305-003276 C Estab
16) PIN Description : PIN() Specification : PIN AXIS AS PER FGK DRG. NO. C Estab
17) BOLTS Description : BOLTS() Specification : FINISH MACHINING OF BOLT M16X128 C Estab
18) FORG.CRANK SHAFTS, CONNECT.RODS, ROLLS, ROUND SHAFTS UP TO 250 MM DIA.WITH WT.1.5 TON & LENGTH 6 MTR Description : FORG.CRANK SHAFTS, CONNECT.RODS, ROLLS, ROUND SHAFTS UP TO 250 MM DIA.WITH WT.1.5 TON & LENGTH 6 MTR() Specification : FINISH MACHINIG OF ROD 2A26-02-156 C Estab
19) HAMMER TO DRG. NO. 32-0601 MK-III Description : HAMMER TO DRG. NO. 32-0601 MK-III() Specification : HAMMER TO DRG. NO. 32-0601 MK-III,MATERIAL BS 970 PT I 1983 GD:070 M-55(B.S 970 EN-9) ALT.MATERIAL: FROM I.C ROUTE I.C DRG NO.SK-5377R BS 3146 Pt.1-1974. TYPE CLASS-12 Gr.A. C Estab
20) Hammer Description : Hammer() Specification : As per FGK Drg.No. SK-01247 FOR MK-III C Estab
21) INSULATOR LOWER DRG.NO.2A26-02-269 Description : INSULATOR LOWER DRG.NO.2A26-02-269() Specification : INSULATOR LOWER DRG.NO.2A26-02-269 C Estab
22) INSULATOR UPPER DRG.NO.2A26-02-268 Description : INSULATOR UPPER DRG.NO.2A26-02-268() Specification : INSULATOR UPPER DRG.NO.2A26-02-268 C Estab
23) KEY AS PER DRG 161 480 Description : KEY AS PER DRG 161 480() Specification : KEY AS PER DRG.NO.161-480 FOR SHARANG ORD C Estab
24) FINISH COMPONENT OF KEY 176 1104 FOR SHARANG Description : FINISH COMPONENT OF KEY 176 1104 FOR SHARANG() Specification : KEY OPERATING LEVER C Estab
25) LOCKING PLATE 1481M X Description : LOCKING PLATE 1481M X() Specification : LOCKING PLATE AS PER D.S. CAT NO. 5310-022970 C Estab
26) PAWL Description : PAWL() Specification : DRG NO 32-0102 C Estab
27) Pin Lever Spring main Description : Pin Lever Spring main() Specification : As per FGK Drg.PH1-21/32-0121 C Estab
28) PLATE BODY TO DRG. NO. 32-0501 MK-III Description : PLATE BODY TO DRG. NO. 32-0501 MK-III() Specification : PLATE BODY TO DRG. NO. 32-0501 MK-III MATERIAL:-BS 970 Pt.1: 1983 Gd. 070 M-55 (BS 970 EN-9), FINISH:-ELECTROSTATIC POWDER COATING AFTER ASSY. ALT MATERIAL FROM IC ROUTE:-BS 3146 PT.1 1974 TYPE CLASS-8. C Estab
29) Plate Body Description : Plate Body() Specification : As per FGK Drg. C Estab
30) PLUNGER DETENT Description : PLUNGER DETENT() Specification : PLUNGER DETENT DRG.NO.ILG-153 C Estab
31) PLUNGER Description : PLUNGER() Specification : AS PER D.S.CAT NO.5340-015718 MK-1 C Estab
32) REBOUND SLIDE Description : REBOUND SLIDE() Specification : AS PER DRG.NO. 32-0122 MK-III C Estab
33) REBOUND TRIGGER Description : REBOUND TRIGGER() Specification : AS PER DRG. NO. 32-0132 MK-III C Estab
34) RIB 8138 FOR SHARANG Description : RIB 8138 FOR SHARANG() Specification : RIB AS PER DRG NO.176-8138 FOR SHARANG ORD C Estab
35) OIL OX-52 (RIFLE OIL) Description : OIL OX-52 (RIFLE OIL)() Specification : RIFLING BOX TO DRG. NO. TPH-3/1/63* C Estab
36) SEAT Description : SEAT() Specification : SEAT OBTURATOR BARREL C Estab
37) Shield Description : Shield() Specification : Rev Comp.Drg. No.- SK-01287 C Estab
38) STOP CYLINDER Description : STOP CYLINDER() Specification : DRG NO 32-0111 C Estab
39) STUD REBOUND Description : STUD REBOUND() Specification : AS PER DRG. NO. 32-0205 C Estab
40) SWIVELL HAMMER Description : SWIVELL HAMMER() Specification : DRG NO 32-0607 C Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) SEAR SAFETY[70]() Specification : SEAR SAFETY IN FINISHED CONDITION AS PER DRG. NO.-ARDE/SK-2689/63(DS CAT NO.1005-007738)DC(I)N0.26743-SA,DT.26.02.2015, C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN TRIGGER HAMMER AND SEAR SAFETY for JVPC[70]() Specification : PIN TRIGGER, HAMMER AND SEAR SAFETY DRG.NO. 0204-03-02-02-18 -003-00DA. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Blank of Body Cover Drg No 23055A SKM 902 1[01]() Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902 1, C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT[70]() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) ST BLANK OF RECEIVER PLATE LEFT AND RIGHT FOR MAG[01]() Specification : AS PER DRG. C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Body Cover Right Air Version[70]() Specification : Body Cover Right (Air Version) as per FN Dgr. No. 3602008030 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN TRIGGER HAMMER AND SEAR SAFETY for JVPC[70]() Specification : PIN TRIGGER, HAMMER AND SEAR SAFETY DRG.NO. 0204-03-02-02-18 -003-00DA. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN AUTO SEAR FOR JVPC[70]() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017 00DB C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) TRIGGER saf matl[70]() Specification : TRIGGER IN FINISH CONDITION AS PER DRG.NO.CQA(I)393/26 WITH-OUT ANODIZE PROTECTIVE FINISH FOR FIRING DEVICE, MATERIAL TO BE SUPPLIED BY SAF THROUGH LF NO.0142032535 AGAINST BANK GUARANTEE CAT-/PT NO.1005-007703. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Blank of Body Cover Drg No 23055A SKM 902 1[01]() Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902 1, C Nonestab
2) Body Trigger for MAG[61]() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Nonestab
3) Steel Blank of Cylinder Gas[01]() Specification : Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G). C Estab
Category :
Grade : Grade III
Size : S
4588 FRONTIER TOOLINGS
E-45,ISPAT NAGAR, PANKI PANKI KANPUR NAGAR UTTAR PRADESH
PIN1 : 208022
Phone No. : 0512-2218422 		AABFF1848G

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) ARM (155mm FH Gun) Description : ARM (155mm FH Gun)() Specification : AS PER DRG. NO. 6358150 C Estab
2) ASSY. OF PRIMER MAGAZINE Description : ASSY. OF PRIMER MAGAZINE() Specification : AS PER PART NO. 1165150 FOR 155 FH GUN C Estab
3) BASE 176 8136 FOR SHARANG Description : BASE 176 8136 FOR SHARANG() Specification : BASE AS PER DRG NO 176-8136 FOR SHARANG ORD C Estab
4) BLANK FOR BODY COVER Description : BLANK FOR BODY COVER() Specification : BLANK FOR BODY MK-III C Estab
5) BODY (FINISH) Description : BODY (FINISH)() Specification : BODY BREECH BLOCK OPERATING LEVER C Estab
6) FORGED STEEL FLANGE UPTO 50TONS AND RING BAR,GUN BARREL, BR.RING,CASING COUPLING,BR.BLOCK Description : FORGED STEEL FLANGE UPTO 50TONS AND RING BAR,GUN BARREL, BR.RING,CASING COUPLING,BR.BLOCK() Specification : BORE ENLARGEMENT OF T-72 CASING C Estab
7) BRACKET DRG IWP 1031 Description : BRACKET DRG IWP 1031() Specification : BRACKET DRG IWP 1031 C Estab
8) TOOLS Description : TOOLS() Specification : BROACHING TOOL FOR T-72 SAG CAM C Estab
9) BUSHING SLEEVE FOR MK II Description : BUSHING SLEEVE FOR MK II() Specification : BUSHING SLEEVE TO DRG NO 3120-105151 FOR MK-II SPARE C Estab
10) CAP FOR CONTACT ELECTRICAL AS PER DRG Description : CAP FOR CONTACT ELECTRICAL AS PER DRG() Specification : CAP FOR CONTACT ELECTRICAL AS PER DRG NO.1015-003201 C Estab
11) HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS) Description : HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS)() Specification : TWIST DRILL P/SH SIZE-7.20MM DIA S Estab
12) CASE OF FIRING UNIT Description : CASE OF FIRING UNIT() Specification : AS PER DRG. NO. 3053014 C Estab
13) COVER CATCH Description : COVER CATCH() Specification : AS PER DS CAT NO.1005-000464 C Estab
14) MACHINE COMPONENTS Description : MACHINE COMPONENTS() Specification : SHIM 1015-000201/5365-010653 C Estab
15) PIN Description : PIN() Specification : PIN HOUSING C Estab
16) MACHINING Description : MACHINING() Specification : ROUGH MACHINING OF FRONT C Estab
17) GAUGES Description : GAUGES() Specification : CONCENTRICITY PLUG GAUGE FOR BARREL C Estab
18) COVER & PLATE Description : COVER & PLATE() Specification : PLATE DRG NO-155/COMP-5/85(6358 146 R Estab
19) T/S HSS TWIST DRILL SIZE:40MM DIA Description : T/S HSS TWIST DRILL SIZE:40MM DIA() Specification : T/S HSS TWIST DRILL SIZE:40MM DIA S Estab
20) FIXTURES, DESIGN & DEVELOPMENT Description : FIXTURES, DESIGN & DEVELOPMENT() Specification : DESIGN,DEV.&SUPPLY OF FIX.FOR T-90 C Estab
21) MANUFACTURING OF COMPONENTS Description : MANUFACTURING OF COMPONENTS() Specification : SEALED COLLET AS PER WALTER CODE C Estab
22) CLOSED DIE FORGINGS OF PINIONS AND GEARS OF WEIGHT 50 TO 350 KGS. Description : CLOSED DIE FORGINGS OF PINIONS AND GEARS OF WEIGHT 50 TO 350 KGS.() Specification : DIE FORGING LEVER FOR LFG ORD. C Estab
23) DIES Description : DIES() Specification : DIE FORGING HOLDER FOR LFG ORD. C Estab
24) Extractor Description : Extractor() Specification : As per FGK Drg.4081489 C Estab
25) CRANK Description : CRANK() Specification : FINISH COMPONENT OF CRANK C Estab
26) FINISH COMPONENT OF KEY 176 1104 FOR SHARANG Description : FINISH COMPONENT OF KEY 176 1104 FOR SHARANG() Specification : FINISH COMPONENT OF KEY 176 1104 FOR SHARANG FOR SHARANG ORD C Estab
27) FINISH MACHINE OF BREECH CARRIER Description : FINISH MACHINE OF BREECH CARRIER() Specification : AS PER DRG. NO. 2025298 C Estab
28) FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32. Description : FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32.() Specification : FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32. C Estab
29) FINISH MACHINING OF VARIOUS MECH. COMPONENTS Description : FINISH MACHINING OF VARIOUS MECH. COMPONENTS() Specification : SUPPLY OF "HT FOR NITRIDING C Estab
30) SAFETY CATCH FIRING MECH ASSY Description : SAFETY CATCH FIRING MECH ASSY() Specification : SAFETY CATCH FIRING MECH ASSY MECHANISM SUB ASSY AS PER DRG NO-161-483 C Estab
31) FINISH MACHINING OF INSERT Description : FINISH MACHINING OF INSERT() Specification : FINISH MACHINING OF INSERT C Estab
32) FINISH MACHINING OF RACK AS PER DRG NO.4080437. Description : FINISH MACHINING OF RACK AS PER DRG NO.4080437.() Specification : FINISH MACHINING OF RACK AS PER DRG NO.4080437. C Estab
33) FIXTURES Description : FIXTURES() Specification : FIXTURE FOR HOUSING C Estab
34) FINISH CASTING OF HOUSING AS PER DRG 161 467 FOR SHARANG Description : FINISH CASTING OF HOUSING AS PER DRG 161 467 FOR SHARANG() Specification : FINISH CASTING OF HOUSING AS PER DRG 161 467 FOR SHARANG ORD C Estab
35) TWIST DRILL JOBBER P/S-2.2MM DIA Description : TWIST DRILL JOBBER P/S-2.2MM DIA() Specification : TWIST DRILL JOBBER P/S-2.2MM DIA S Estab
36) TWIST DRILL JOBBER P/S-3.0 MM DIA Description : TWIST DRILL JOBBER P/S-3.0 MM DIA() Specification : TWIST DRILL JOBBER P/S-2.2MM DIA S Estab
37) BEARING LS-11 Description : BEARING LS-11() Specification : BEARING LS-11 C Estab
38) INPUT MATERIAL FOR BUSH LOCKING SLIDE Description : INPUT MATERIAL FOR BUSH LOCKING SLIDE() Specification : INPUT MATERIAL FOR BUSH LOCKING SLIDE C Estab
39) INSULATORS/PLUGS/LOCK/BUSHING MATERIALS Description : INSULATORS/PLUGS/LOCK/BUSHING MATERIALS() Specification : AS PER DRG. & SPECIFICATION C Estab
40) INSULATION SLEEVING Description : INSULATION SLEEVING() Specification : AS PER DRG.NO. 5970-002854 C Estab
41) MACHINING OF COMPONENTS Description : MACHINING OF COMPONENTS() Specification : MACHINING OF FIN CYLINDER C Estab
42) SUB ASSY. OF PRIMER MAGAZINE Description : SUB ASSY. OF PRIMER MAGAZINE() Specification : SUB ASSY. OF PRIMER MAGAZINE C Estab
43) LFG ORDNANCE COMPONENTS AS PER ANNEXURE "G" Description : LFG ORDNANCE COMPONENTS AS PER ANNEXURE "G"() Specification : LFG ORDNANCE COMPONENTS AS PER ANNEXURE "G" C Estab
44) NOZZLE AS PER DRG NO. 2A46-01-05. Description : NOZZLE AS PER DRG NO. 2A46-01-05.() Specification : NOZZLE AS PER DRG NO. 2A46-01-05. C Estab
45) PHOSPHER BRONZE, GUN METAL, TIN BRONGE TO ALL STANDARD SPECIFICATION IN THE FORM OF ROUND, SQUARE, R Description : PHOSPHER BRONZE, GUN METAL, TIN BRONGE TO ALL STANDARD SPECIFICATION IN THE FORM OF ROUND, SQUARE, R() Specification : AS PER SPECIFICATION C Estab
46) PLUNGER DETENT Description : PLUNGER DETENT() Specification : PLUNGER DETENT DRG.NO.ILG-153 C Estab
47) PRE MACHINING OF STOP CARTRIDGE BASE Description : PRE MACHINING OF STOP CARTRIDGE BASE() Specification : PRE MACHINING OF STOP CARTRIDGE BASE C Estab
48) PREMACHINING OF FRAME DRG. NO. 4081488 FG. 510476. Description : PREMACHINING OF FRAME DRG. NO. 4081488 FG. 510476.() Specification : PREMACHINING OF FRAME FOR SP.OF 155 FH BOFORSE DRG. NO. 4081488 FG. 510476. C Estab
49) PRESS TOOL & DIES Description : PRESS TOOL & DIES() Specification : PRESS TOOL FOR PLATE FOR IFG S Estab
50) REBOUND SLIDE Description : REBOUND SLIDE() Specification : AS PER DRG. & SPECIFICATION C Estab
51) RELEASE LEVER SUB ASSY 176 8151 Description : RELEASE LEVER SUB ASSY 176 8151() Specification : RELEASE LEVER SUB ASSY AS PER DRG NO.176-8151 OF SEMI-AUTOMATIC BR BLOCK OPERATION MECHANISM OF SHARANG ORDNANCE C Estab
52) MANUFACTURER/REPAIR OF HYDRAULIC CYLINDER Description : MANUFACTURER/REPAIR OF HYDRAULIC CYLINDER() Specification : REPAIRING OF SET OF FORGING & TRIMMING DIE(L) C Estab
53) FERROUS CLOSED DIE FORGING DULY PROOF Description : FERROUS CLOSED DIE FORGING DULY PROOF() Specification : REPAIRING OF SET OF FORGING DIE C Estab
54) FORGINGS Description : FORGINGS() Specification : SET OF FORGING DIES OF T-90 ORDNAN. C Estab
55) ALL TYPES OF HELICAL COMPRESSION, EXTENSION AND TORSION SPRING Description : ALL TYPES OF HELICAL COMPRESSION, EXTENSION AND TORSION SPRING() Specification : AS PER DRG. & SPECIFICATION C Estab
56) SAFETY Description : SAFETY() Specification : SAFETY LOCK ASSY.DRG.NO.161-681 C Estab
57) All types of Rubber Mounded components i.e " O" Rings, Seals, Gasket, Rubber Mountings, Bushes, Grom Description : All types of Rubber Mounded components i.e " O" Rings, Seals, Gasket, Rubber Mountings, Bushes, Grom() Specification : As per FGK requirement C Estab
58) INDIAN MACHINERY PLANT AND SPARES (MECHANICAL & ELECTRICAL) Description : INDIAN MACHINERY PLANT AND SPARES (MECHANICAL & ELECTRICAL)() Specification : SET OF SPARES CONSISTING OF CAM C Estab
59) Mechenical Assys Description : Mechenical Assys() Specification : STRIKER ASSEMBLY C Estab
60) SLEEVES Description : SLEEVES() Specification : SLEEVE IFL-7642 DS CAT 3120-004660 C Estab
61) SPACER STEPPED Description : SPACER STEPPED() Specification : AS PER DRG.NO.ARDE/SK-2689/78 C Estab
62) SCREW Description : SCREW() Specification : SPECIAL SCREW DRG NO-155/COMP-5/88(6349 439 C Estab
63) STRIKER Description : STRIKER() Specification : AS PER DRG. & SPECIFICATION C Estab
64) SOLID CARBIDE CUTTING TOOLS (DRILLS, REAMERS, BALL NOSE, PROFILE TOOLS) Description : SOLID CARBIDE CUTTING TOOLS (DRILLS, REAMERS, BALL NOSE, PROFILE TOOLS)() Specification : P/S SOLID CARBIDE END MILL 16 MM S Estab
65) TRIGGER TO DRG. NO. 32-0701 MK-III Description : TRIGGER TO DRG. NO. 32-0701 MK-III() Specification : TRIGGER TO DRG. NO. 32-0701 MK-III ALT VERSION 2 MATERIAL: BS 970 Pt.1: 1983 GD. 070 M-55 (BS 970 EN-9)/ALT.MTL.(I.C.)BS3146 PT.-1,1974 TYPE CLASS-8 ALT. MATERIAL FOR MIM COMPONENTS:MIM 4650. C:0.3-0.6%, NI:1.5-2.5%,Cr-0.5% MAX.,Si-0.5%, S Estab
66) SOLID CARBIDE DRILL DIA 8.5MM Description : SOLID CARBIDE DRILL DIA 8.5MM() Specification : SOLID CARBIDE DRILL DIA 8.5MM S Estab
67) HSS TWIST DRILL P.S S-10.2MM DIA LS Description : HSS TWIST DRILL P.S S-10.2MM DIA LS() Specification : HSS TWIST DRILL P.S S-10.2MM DIA LS S Estab
68) SET OF S/C DRILL DIA 4MM Description : SET OF S/C DRILL DIA 4MM() Specification : SET OF S/C DRILL DIA 4MM S Estab
69) SET OF S/C DRILL DIA 9MM Description : SET OF S/C DRILL DIA 9MM() Specification : SET OF S/C DRILL DIA 9MM S Estab
Category : s
Grade : 3
Size : S
4589 PRATIK METAL & FABRICATORS, BHUSAWAL
S.NO. 161/2, KANDARI SHIVAR NEAR CO-OPERATIVE INDUSTRIAL ESTATE VARANGAON ROAD TA. BHUSAWAL DIST. JALGAON Maharashtra
PIN1 : 425201
Phone No. : 225367
GSTIN : 27AANPP7328K1ZI 		AANPP7328K

Download 		1) Ordnance Factory Bhusawal
Name Specification Use Status
1) CARRYING LINK[99]() Specification : DRG.NO OFB/C/1540 E Nonestab
2) HANDLE[99]() Specification : AS PER O.F.BSL DRAWING/SPECIFICATION E Nonestab
3) BOTTOM CORNER PIECE FOR BOX C-53[99]() Specification : AS PER O.F.BHUSAWAL DRAWING E Nonestab
4) Handle with Handle Clip for Box C-53A[99]() Specification : AS PER O.F. BHUSAWAL DRAWING/SPECIFICATION C Nonestab
5) BRACKET A-1 FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
6) BRACKET A-2 FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
7) HINGE - AS PER DRG. NO. OFB/C/1565[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
8) BRACKET B-1 FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
9) Bracket B-2 for Box C-53 A[99]() Specification : As per O.F.Bhusawal Drawing/Specification E Nonestab
10) BOTTOM SUPPORT PIECE FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
11) BRACKET CARTRIDGE REAR FOR BOX C53[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
12) BRACKET END FOR SHELL FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION R Nonestab
13) BRACKET FOR AMMN. BOX SM 601C[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
14) PIECE PACKING FOR BOX SM 601[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
15) CHANNEL - FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION C Nonestab
16) LID CORNER PIECE FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
17) PIECE PACKING 'B'[99]() Specification : AS PER DRG NO. OFB/C/1541 E Nonestab
18) PIECE PACKING 'A'[99]() Specification : PIECE PACKING 'A' AS PER REF. PART NO. ISV1820 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) PLATE HOOK AS PER DRG. NO. OFB/C/1560[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
2) LINK HOLDING END FOR BOX H2A[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
3) BOLT & CUP FOR PRB DRUM[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
4) CATCH FOR BOX SM 171K, 651J, 642[07]() Specification : AS PER DRG./SPECIFICATION C Nonestab
5) BRACKET MIDDLE FOR BOX C-51A AND C52A[07]() Specification : BRACKET MIDDLE FOR BOX C-51A & BOX C-52A AS PER DRG.NO.OFB/C/1363,DET-12 & OFB/C/1364,DET-10 REF.DRG.NO.ISV-2033 DC 36629-A DATED 06/01/2000. E Nonestab
6) BRACKET CROSS FOR BOX C51A[07]() Specification : AS PER OFBH SPECIFICATION C Nonestab
7) PIECE PACKING END FOR BOX C-43[07]() Specification : PIECE PACKING END FOR BOX C-43 R Nonestab
8) PIECE PACKING BOTTOM BOX-C43A[07]() Specification : PIECE PACKING BOTTOM BOX-C43A R Nonestab
9) RIVET MS FLAT 4 X 10 MM[07]() Specification : RIVET MS FLAT 4 X 10 MM R Nonestab
10) HINGE PIN DRG. NO. OFB/C/700[07]() Specification : HINGE PIN DRG. NO. OFB/C/700 R Nonestab
11) BRACKET SIDE FOR BOX C-51A[07]() Specification : BRACKET SIDE FOR BOX C-51A R Nonestab
12) SUPPORT FOR BRACKET SIDE C-51A[07]() Specification : SUPPORT FOR BRACKET SIDE C-51A R Nonestab
13) BRACKET TOP FOR BOX C 51-A[07]() Specification : BRACKET TOP FOR BOX C 51-A R Nonestab
14) GUIDE ANGLE FOR BOX C-51A[07]() Specification : GUIDE ANGLE FOR BOX C-51A R Nonestab
15) STOPPER REAR FOR BOX C-51 A[07]() Specification : STOPPER REAR FOR BOX C-51 A R Nonestab
16) S.M. FLAT 5 X 25 MM TO IS-1079-94[07]() Specification : S.M. FLAT 5 X 25 MM TO IS-1079-94 R Nonestab
17) STRENGHTENING BAND (CR. LINK) 1538[07]() Specification : STRENGHTENING BAND (CR. LINK) 1538 R Nonestab
18) STRENGTHENING PLATE OFB/C/1546[07]() Specification : STRENGTHENING PLATE OFB/C/1546 R Nonestab
19) STRENGTHENING BAND OFB/C/1584[07]() Specification : STRENGTHENING BAND OFB/C/1584 R Nonestab
20) STAPLE FOR BOX SM 171 K[07]() Specification : STAPLE FOR BOX SM 171 K R Nonestab
21) HINGE FOR BOX SM 171 K 642 C[07]() Specification : HINGE FOR BOX SM 171 K 642 C R Nonestab
22) BIGGER PACKING PIECE BOX 642-C[07]() Specification : BIGGER PACKING PIECE BOX 642-C R Nonestab
23) WOOD PACKING FOR BOX SM-642-C[44]() Specification : WOOD PACKING FOR BOX SM-642-C R Nonestab
24) SUB ASSEMBLY OF LINK & HANDLE[07]() Specification : SUB ASSEMBLY OF LINK & HANDLE R Nonestab
25) BRACKET FRONT (FOR SHELL) C-52[07]() Specification : BRACKET FRONT(FOR SHELL) C-52 R Nonestab
26) MIDDLE BRACKET (FRONT) C-52-A[07]() Specification : MIDDLE BRACKET (FRONT) C-52-A R Nonestab
27) BRACKET REAR FOR BOX C-52-A[07]() Specification : BRACKET REAR FOR BOX C-52-A R Nonestab
28) BIGGER BRACKET FOR BOX SM+-642-C[07]() Specification : AS PER OFBH DRG R Nonestab
29) SMALLER BRACKET FOR BOX SM-642-C[07]() Specification : AS PER OFBH DRG AND SPECIFICATION R Nonestab
Category : p
Grade : Grade III
Size : S
4590 RMV MACHINES AND TOOLS
INDUSTRY LLP,PLOT NO.781-MCHIRAURA ROAD,RANIA INDUSTRIAL AREA,KANPUR DEHAT-209304 RANIA INDUSTRIAL AREA KANPUR DEHAT UTTAR PRADESH
PIN1 : 209304
Phone No. : 9839033477 		AAVFR1895F

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) AXLE AS PER DRG 161 713 FOR SHARANG Description : AXLE AS PER DRG 161 713 FOR SHARANG() Specification : AXLE AS PER DRG NO. 161 -713 FOR SHARANG ORD C Estab
2) BASE 176 8136 FOR SHARANG Description : BASE 176 8136 FOR SHARANG() Specification : BASE ARM C Estab
3) CRANK Description : CRANK() Specification : BELL CRANK LEVER C Estab
4) MACHINE COMPONENTS Description : MACHINE COMPONENTS() Specification : STUD 5307-231480 C Estab
5) FINISH CASTING OF BODY LOCK SAFETY 161 682 Description : FINISH CASTING OF BODY LOCK SAFETY 161 682() Specification : FINISH CASTING OF BODY LOCK SAFETY AS PER DRG NO. 161-682 FOR SHARANG ORD C Estab
6) CAP Description : CAP() Specification : AS PER DRG.NO. A51912-19 C Estab
7) BREECH CARRIER Description : BREECH CARRIER() Specification : CARRIER/DOG 52-IIT 412C-02-99 C Estab
8) NUT, BOLTS, WASHERS Description : NUT, BOLTS, WASHERS() Specification : CASTLE NUT C Estab
9) CATCH CARRING HANDLE Description : CATCH CARRING HANDLE() Specification : CATCH AS PER DRG.NO. ILG-178 C Estab
10) CONNECTING LINK RIGID Description : CONNECTING LINK RIGID() Specification : AS PER DRG. & SPECIFICATION C Estab
11) FINISH COMPONENT OF DEFLECTOR 166 471 FOR SHARANG Description : FINISH COMPONENT OF DEFLECTOR 166 471 FOR SHARANG() Specification : FINISH COMPONENT OF DEFLECTOR AS PER DRG NO-166 471 FOR SHARANG ORD C Estab
12) BOLTS Description : BOLTS() Specification : EYE BOLT C Estab
13) MACHINING Description : MACHINING() Specification : FINISH MACHINING OF WASHER C Estab
14) FUME EXTRACTOR SUB ASSY 166 875 OF BARREL ASSY OF SHARANG ORD Description : FUME EXTRACTOR SUB ASSY 166 875 OF BARREL ASSY OF SHARANG ORD() Specification : FUME EXTRACTOR SUB ASSY 166 875 OF BARREL ASSY OF SHARANG ORD C Estab
15) GAUGES Description : GAUGES() Specification : PROFILE GAUGE 27 DEG. ANGLE & SLOT C Estab
16) All types of Rubber Mounded components i.e " O" Rings, Seals, Gasket, Rubber Mountings, Bushes, Grom Description : All types of Rubber Mounded components i.e " O" Rings, Seals, Gasket, Rubber Mountings, Bushes, Grom() Specification : GASKET 52-CT 412-02-92 E Estab
17) SCREW Description : SCREW() Specification : SCREW-ILG-202 DRG. NO.5305-012185 C Estab
18) INSULATION SLEEVING Description : INSULATION SLEEVING() Specification : AS PER DRG.NO. 5970-002854 C Estab
19) INSULATOR Description : INSULATOR() Specification : AS PER DRG.NO. ILG-155/DS CAT 5970-002105 C Estab
20) KEY AS PER DRG 161 480 Description : KEY AS PER DRG 161 480() Specification : KEY AS PER DRG.NO.161-480 FOR SHARANG ORD C Estab
21) PANEL Description : PANEL() Specification : AS PER DRG.NO.NAI(V) 9016/5/3 R Estab
22) PIN Description : PIN() Specification : PIN SHOULDER HEADLES C Estab
23) COVER & PLATE Description : COVER & PLATE() Specification : PLATE RIGHT C Estab
24) PLUNGER AS PER DRG 161 463 FOR SHARANG Description : PLUNGER AS PER DRG 161 463 FOR SHARANG() Specification : PLUNGER AS PER DRG 161-463 FOR SHARANG ORD C Estab
25) PLUNGER DETENT Description : PLUNGER DETENT() Specification : PLUNGER DETENT DRG.NO.5340-167960 C Estab
26) PLUNGER LOCKING Description : PLUNGER LOCKING() Specification : AS PER D.S.CAT NO.1015-003175 C Estab
27) PRESSURE BLOCK 2A26-02-5 Description : PRESSURE BLOCK 2A26-02-5() Specification : PRESSURE BLOCK 2A26-02-5 C Estab
28) MACHINE SUB ASSEMBLY Description : MACHINE SUB ASSEMBLY() Specification : SAFETY LOCK ASSEMBLY AS PER DRG. NO. 161-681 C Estab
29) SLEEVES Description : SLEEVES() Specification : AS PER DRG.1015-000213 C Estab
30) SPACER Description : SPACER() Specification : SPACER SLEEVE (ORDNANCE) C Estab
31) SPRING Description : SPRING() Specification : SPRING LOADED C Estab
32) PIN STRIKER Description : PIN STRIKER() Specification : FGK DRG. NO. PH -6-3 C Estab
33) WASHER Description : WASHER() Specification : AS PER DRG.NO. A51020-68 C Estab
Category : s
Grade : 3
Size : S
4591 ELECTRONICS CORPORATION OF INDIA LIMITED
ECIL P.O. HYDRABAD HYDRABAD ANDHRA PRADESH
PIN1 : 500062
Phone No. : 04027125909 		AAACE4809L

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) MODIFIED BUZZER TO SUIT LIMPET MINE() Specification : MODIFIED BUZZER TO SUIT LIMPET MINE MAINDEKA. R Estab
2) TIMER ASSY. ARDE/SPECN/604/1998() Specification : ARDE/SPECN/604/1998 . R Estab
Category : p
Grade : 3
Size : L
1) Ordnance Factory Medak

[ENR Registration]
Name Specification Use Status
1) HULL ELECTRIC WIRES BMP II Description : HULL ELECTRIC WIRES BMP II() Specification : 675-88-CB2 E Estab
2) TURRET ELECTRICAL WIRES 678-97-Cd1 (BMP-IIK) Description : TURRET ELECTRICAL WIRES 678-97-Cd1 (BMP-IIK)() Specification : - do - E Estab
Category : dp
Grade : 2
Size : S
4592 THE METAL POWDER CO. LTD.
MARAVAN KULEM THIRUMANGALAM PUDUNGER MADURAI TAMILNADU
PIN1 : 626709
Phone No. : 0761-2743368 		626709M115

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Magnesium Powder GR III ITEM CODE 1001491847 Description : Magnesium Powder GR III ITEM CODE 1001491847() Specification : MAGNESIUM POWDER FOR EXPLOSIVE&PYROTECHNIC COMPOSITION GRIIITOSPECN-IS:2307-2004(2nd REV) R Estab
Category : p
Grade : 3
Size : S
4593 MOD FORGE PVT. LTD
35-B/3, INDUSTRIAL ESTATE CHENNAI T.N.
PIN1 : 600058
Phone No. : 0761-2743368 		600058M438

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL ROD 22 23 MM DIA GR SS D 24 LF 0113000022 Description : STEEL ROD 22 23 MM DIA GR SS D 24 LF 0113000022() Specification : GR SS D 24 R Estab
2) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041) Description : STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)() Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK R Estab
3) STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032) Description : STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032)() Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED R Estab
4) STEEL ROD 32MM DIA GOST-V-10230-75 (0184108032) Description : STEEL ROD 32MM DIA GOST-V-10230-75 (0184108032)() Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE R Estab
5) STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145) Description : STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)() Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2004)1st REV)GRADE 14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2003)1s R Estab
6) STEEL ROD 18MM BS970 080M50 CD ANL (0133001165) Description : STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)() Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R R Estab
7) STEEL ROD 20 64 mm BS 970 EN 3 LF 0352001901 Description : STEEL ROD 20 64 mm BS 970 EN 3 LF 0352001901() Specification : BS 970 EN 3 R Estab
Category : p
Grade : 3
Size : S
4594 KOCHHAR SAW MILLS
48, NARBADA ROAD JABALPUR JABALPUR M.P.
PIN1 : 482001
Phone No. : 0761-2743368 		482001K247

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CRATE 13A WOODEN ISV-948 (84HE/ILLG (6574380000) Description : CRATE 13A WOODEN ISV-948 (84HE/ILLG (6574380000)() Specification : CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED W P Estab
Category : p
Grade : 3
Size : S
4595 DEEPAK FASTENERS LTD., LUDHIANA
E-536, PHASE-VI, FOCAL POINT, LUDHIANA LUDHIANA PUNJAB
PIN1 : 141010
Phone No. : 9316169511 		AAACD6282G

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Grub Screw M8 x 1.25 P x 8 Length. Make: Unbreako Description : Grub Screw M8 x 1.25 P x 8 Length. Make: Unbreako() Specification : Grub Screw M8 x 1.25 P x 8 Length. Make: Unbreako R Estab
2) Grub Screw M4 x 0.7 P x 5 Long. Make: Unbreako Description : Grub Screw M4 x 0.7 P x 5 Long. Make: Unbreako() Specification : Grub Screw M4 x 0.7 P x 5 Long. Make: Unbreako R Estab
Category : p
Grade : 2
Size : M
4596 SEANA INDUSTRIES
18, Industrial Estate, Adhartal Jabalpur Madhya Pradesh
PIN1 : 482004
Phone No. : 0761-4031354 		JBPSO4426C

Download 		1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) AMMUNITION CONTAINER BOX B-9A STEEL Description : AMMUNITION CONTAINER BOX B-9A STEEL() Specification : AMMUNITION CONTAINER BOX B-9A STEEL TO DESIGNER'S REF: ARDE-2174, SHEET NO.3 PART NO.ISV 553A, DC 35907-A, SPECN IA 1169(n) DC 35576-A BOXES TO BE PAINTED AS PER DRG. WITH PAINT OF SHADE OLIVE GREEN (ISC 220) OF IS:5-2007 WITH 6TH REVI C Estab
Category : p
Grade : 3
Size : S
4597 LORDS VANIJYA PVT. LTD.
227/1B, A.J.C. BOSE ROAD KOLKATA WEST BENGAL
PIN1 : 700020
Phone No. : 913340033508 		AJCPP0778P

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) COMPONENTS FOR CARTG. 40MM MGL AMN() Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP R Estab
2) MINE APM CONSISTING OF BODY,SPOOL() Specification : CQA(A) 1804 R Estab
Category : p
Grade : 3
Size : S
4598 WESTERN EXTRUSION INDUSTRIES,
219, KIKA, STREET (GULALWADI) BOMBAY MUMBAI MAHARASHTRA
PIN1 : 400002
Phone No. : 0761-2743368 		400002W020

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) COPPER TUBE 46.8X40.3MM JSS:4710-01 (0707255347) Description : COPPER TUBE 46.8X40.3MM JSS:4710-01 (0707255347)() Specification : COPPER TUBE O/D 46.8 (+/-)0.20MM X I/D 40.3 (+/-)0.10MM IN STRAIGHT LENGTH OF 1.5 Mtr. TO 3 Mtr. TO SPECN- JSS-4710-01-2007 (REV NO.4)GRADE-I R Estab
2) COPPER TUBE 35X2.5MM W/T JSS-4710-1 (0707255389) Description : COPPER TUBE 35X2.5MM W/T JSS-4710-1 (0707255389)() Specification : COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION. R Estab
3) BRASS ROD 11 MM BS:2874 CZ122 H (0712200012) Description : BRASS ROD 11 MM BS:2874 CZ122 H (0712200012)() Specification : BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H R Estab
4) BRASS ROD 6.35MM IS:319 GRD.1 HB (0711904006) Description : BRASS ROD 6.35MM IS:319 GRD.1 HB (0711904006)() Specification : BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB. R Estab
5) BRASS ROD 8.5 MM IS:4170 CU ZN 40 (0711906010) Description : BRASS ROD 8.5 MM IS:4170 CU ZN 40 (0711906010)() Specification : BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40. R Estab
6) BRASS ROD 9.5MM OD IS-319-89 GR-2 (0712100010) Description : BRASS ROD 9.5MM OD IS-319-89 GR-2 (0712100010)() Specification : BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B". R Estab
7) BRASS ROD 29 MM BS2874 CZ122 M LF 0712200029 Description : BRASS ROD 29 MM BS2874 CZ122 M LF 0712200029() Specification : BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION. R Estab
8) BRASS ROD 4MM BSEN12166 CUZN35PB2 (0717501004) Description : BRASS ROD 4MM BSEN12166 CUZN35PB2 (0717501004)() Specification : BRASS ROD 4 +/-0.05 MM DIA IN ST. LENGTH OF 2 METERS MIN.TO SPECN.BS EN 12166:2011 DESIGN.CuZn35Pb2 MATERIAL CONDITIONR540 WITH UTS=54-65 Kgf/MM2 & ELONGATION=5% MIN R Estab
9) BRASS ROD 14MM BS2874 CZ122 "M" (0717703904) Description : BRASS ROD 14MM BS2874 CZ122 "M" (0717703904)() Specification : BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M" R Estab
Category : p
Grade : 3
Size : S
4599 NEETA INDUSTRIES
D/16 MAHAVIR JYOT GOVARDHAN NAGAR L B S MARG MULUND Maharashtra
PIN1 : 400080
Phone No. : 21645992
GSTIN : 27ACCPS2075D1ZQ 		ACCP12075D

Download 		1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT 1105 TO DRG NO IMPD0993 WASHER DIA 11 POINT 5 TO DRG NO IMPD0994 HEX NUT M 10 TO DRG NO IMPD0995 AND LOCK NUT M10 FOR SR NO 1 TO DRG IMPD 0996[00]() Specification : ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT-1105 TO DRG NO. IMPD0993, WASHER DIA 11.5 TO DRG. NO.IMPD0994, HEX NUT M-10 TO DRG. NO. IMPD0995 AND LOCK NUT M10 FOR SR. NO. 1 TO DRG. IMPD 0996. C Estab
Category : p
Grade : Grade III
Size : S
4600 EFD INDUCTION PRIVATE LIMITED
KIADB BENGALORE AEROSPACE PARK, BUDIGERE ,POST: BANGALORE NORTH TALUK,PLOT NO.-43 & 44, BANGALORE KARNATAKA
PIN1 : 562129
Phone No. : 09880845012
GSTIN : 29AAACE3219Q1ZA 		BLRE00286G

Download 		1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) INDUCTION HARDENING OF SECTOR 675 54 190 Description : INDUCTION HARDENING OF SECTOR 675 54 190() Specification : INDUCTION HARDENING OF SECTOR DRG No. 675- 54-190 C Estab
2) INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438 Description : INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438() Specification : INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438 [ FOR FIRST TIME PROCUREMENT FIRM SHOULD DO TRIAL, TESTING OF FIRST SHIELD BY CUTTING/SECTIONING OF FIRST INDUCTION HARDENING SHIELD, PREPARING TEST PIECE AND HARDNESS TES C Estab
Category : p
Grade : 3
Size : M