List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4621 ROHINI AUTO ELECT. PVT. LTD.
D-22, PHASE-IV(EXSTN) I.D.A. JEEDIMETLA HYDERABAD TELANGANA
PIN1 : 500055
Phone No. : 040-3095125
GSTIN : 36AAACR9658L1ZP 		AAACR9658L

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) HOUSING REAR SIGHT 1005 007898 Description : HOUSING REAR SIGHT 1005 007898() Specification : HOUSING REAR SIGHT TO DRG ARDE SK 2825/29 DS CAT NO 1005-007898 DC (I) NO. 26548-SA DT.25.11.10 IN FINISHED CONDITION NOTE: IC WILL BE SUPPLIED BY SAF AGAINST BANK GURANTEE C Estab
2) HOUSING REAR SIGHT NO ARDE SK 3143 83 for LMG 5 56 mm Description : HOUSING REAR SIGHT NO ARDE SK 3143 83 for LMG 5 56 mm() Specification : HOUSING REAR SIGHT TO DRG.NO.ARDE SK 3143/83 DS CAT NO.1005-008012 DC NO.26516-SA DT-26.06.10 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) TRIGGER CQA(SA)SK454/1/1 R5 Description : TRIGGER CQA(SA)SK454/1/1 R5() Specification : TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10, R Estab
4) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
5) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Extractor Small Arms Cartridge DSCAT No.1005/007756 Description : Extractor Small Arms Cartridge DSCAT No.1005/007756() Specification : AS PER DRG. C Estab
7) HAMMER TO DS CAT NO. 1005-008003 Description : HAMMER TO DS CAT NO. 1005-008003() Specification : AS PER DRG. C Estab
8) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
9) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
11) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
12) MOUNTING REAR for MAG Description : MOUNTING REAR for MAG() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Estab
13) NUT PLAIN PRECISION for MAG Description : NUT PLAIN PRECISION for MAG() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Estab
14) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
15) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
16) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Description : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
17) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEVER CLAMPING FRONT LEG ASSY for MAG Description : LEVER CLAMPING FRONT LEG ASSY for MAG() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Estab
19) LEVER CLAMPING REAR LEG ASSY for MAG Description : LEVER CLAMPING REAR LEG ASSY for MAG() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Estab
20) LEG RIGHT FRONT ASSY for MAG Description : LEG RIGHT FRONT ASSY for MAG() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Estab
21) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
22) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4622 AMPSON ENGINEERING PVT. LTD.
PLOT NO. N-26, MIDC TARAPUR BOISAR, DISTRICT-PALGHAR, MAHARASHTRA
PIN1 : 401506
Phone No. : 9892288803 		AAACA3817G

Download 		1) Machine Tool Proto Type Factory

[ENR Registration]
Name Specification Use Status
1) 7112305004 MED SUPPORT OF 155M MM EDP FUZE AS PER DRG NO 770 28 33 00 Description : 7112305004 MED SUPPORT OF 155M MM EDP FUZE AS PER DRG NO 770 28 33 00() Specification : 7112305004 MED SUPPORT OF 155M MM EDP FUZE AS PER DRG NO 770 28 33 00 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) MODE SELECTOR SWITCH HOUSING ASSEMBLY AS PER ODC MTPF DRG NO 740 13 21 00 Description : MODE SELECTOR SWITCH HOUSING ASSEMBLY AS PER ODC MTPF DRG NO 740 13 21 00() Specification : MODE SELECTOR SWITCH HOUSING ASSEMBLY AS PER ODC/MTPF DRG NO 740-13-21-00 C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) NOSE OGIVE AS PER ODC MTPF DRG NO 140 01 12 00 Description : NOSE OGIVE AS PER ODC MTPF DRG NO 140 01 12 00() Specification : NOSE OGIVE AS PER ODC/MTPF DR NO.140-01-12-00 C Estab
2) MODE SELECTOR SWITCH ASSEMBLY AS PER ODC MTPF DRG NO 740 13 23 00 Description : MODE SELECTOR SWITCH ASSEMBLY AS PER ODC MTPF DRG NO 740 13 23 00() Specification : MODE SELECTOR SWITCH ASSEMBLY AS PER ODC/MTPF DRG.NO.740-13-23-00 C Estab
3) LOWER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 32 00 Description : LOWER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 32 00() Specification : LOWER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC/MTPF DRG NO 770-22-32-00 C Estab
4) UPPER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 31 00 Description : UPPER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 31 00() Specification : UPPER BATTERY HOUSING FOR 155MM ELECTRONIC FUZE AS PER ODC/MTPF DRG NO 770-22-31-00 C Estab
5) ELECTRONIC MODULE HOUSING AS PER ODC MTPF DRG NO 740 12 21 00 Description : ELECTRONIC MODULE HOUSING AS PER ODC MTPF DRG NO 740 12 21 00() Specification : ELECTRONIC MODULE HOUSING AS PER ODC/MTPF DRG NO.740-12-21-00 C Estab
6) BAKELITE WASHER FOR 155 MM ELECTRONIC FUZE Description : BAKELITE WASHER FOR 155 MM ELECTRONIC FUZE() Specification : BAKELITE WASHER FOR 155 MM ELECTRONIC FUZE C Estab
Category : ddp
Grade : 1
Size : S
4623 Kiran Equipment Corporation
C - 83, Sector - 63, Noida Uttarpradesh
PIN1 : 201301
Phone No. : 9312223757
GSTIN : 07AACPV4382J1ZA 		DELA20696E

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) Packing Ring() As per Drg C Not Estab
2) Distance Ring() As per Drg C Not Estab
3) DISC() As per Drg C Not Estab
4) SEPARATOR AND MOISTURE() DRG.NO.175.60.002CB-1CB C Non Established
5) PACKING RINGS() DRG NO. 172.35.027-1 C Non Established
Category : P
Grade : III
Size : S
1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) Pump Element Description : Pump Element SB327-07-11() Specification : SB-327-07-11 C Estab
Category : ddp
Grade : 3
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) DOUBLE PRESSURE GAUGE TO DRG NO 6110390[90]() Specification : DOUBLE PRESSURE GAUGE TO DRG NO 6110390 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) AUTOMATIC PRESSURE REGULATOR ADY 2C ASSY TO 6206213075[62]() Specification : AUTOMATIC PRESSURE REGULATOR ADY 2C ASSY TO DRG NO.155.38.31CB-ACB C Nonestab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) MAIN OIL FILTER[62]() Specification : MAIN OIL FILTER TO DRG NO.SB 413-00-15 C Estab
2) PUMP ELEMENT[62]() Specification : PUMP ELEMENT TO DRG NO.SB 327-07-11 C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) Packing of Crankshaft Fly wheel end() To drg. No. SB 3305-27-1 C Estab
2) Thrust Bush() To drg. No. 3305-25-3 C Estab
3) Cover() To drg. No. 340-192-4 C Estab
4) Shim() To drg. No. 303-08-5 C Estab
5) Fuel Filter() To drg. No. SB 3329-00-13 C Estab
6) Filter Cover() To drg. No. SB 3329-01-11 C Estab
7) Filter Element() To drg. No. SB 329-05-7 C Estab
8) Stack of Plates() To drg. No. SB 329-61-11 C Estab
9) Filter Bowl() To drg. No. SB 329-08-06 C Estab
10) Packing Ring() As per drgs. and specifications C Estab
11) Sealing Ring() As per drgs. and specifications C Estab
12) Air Distributor() SB 310-30-6 E Estab
13) Valve Guide() 306-17-1 E Estab
14) Guide Bushing() 506-17-7 E Estab
15) Bearing() SB 327-13-1 E Estab
16) Camshaft Bearing assy() SB 20-06-04-4 E Estab
17) Assy, Piston Pin with End Cap.() 304-10-5 & 304-11-10 E Estab
18) Drive Coupling() Sb 3334-10-8 E Estab
19) Valve () SB 345-40-1 E Estab
20) Intake Manifold() SB 20-19-00-1 E Estab
21) Water Pump() SB 20-11-00-6 E Estab
22) Air Intake unit() SB 345-00-4 E Estab
23) Valve Guide() 306-17-5 E Estab
24) First Slot type Filtering sect() SB 413-04-1 E Estab
25) Starting Valve Bush() 306-19-2 E Estab
26) Bush for Con.rod small end() 304-13-3 E Estab
27) Nut() 301-21-1 E Estab
28) Main Oil Filter() SB 413-00-15 E Estab
29) Disc Washer() 306-117-1 E Estab
Category : P
Grade : II
Size : S
4624 MECH COMPONENTS PVT LTD
#58, C-operative Industrial Estate, Expansion Program,Gandhinagar, Balanagar, Hyderabad-500037 Gandhinagar Balanagar Telangana
PIN1 : 500037
Phone No. : 23079342 		AAACM9481E

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) HOUSING WITH PIN FINISHED FOR DET L F 9911358156 Description : HOUSING WITH PIN FINISHED FOR DET L F 9911358156() Specification : HOUSING WITH PIN DRG.PT NO.IQX-85 SA.DC 36709 A, DATE.08-09-2000. C Nonestab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Trigger Assy. DS CAT No. 1005-006589 Description : Trigger Assy. DS CAT No. 1005-006589() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
4625 TIVEE AGENTS (TRIVENKEM AGENCIES)
499, RG STREET, COIMBATORE TAMIL NADU
PIN1 : 641001
Phone No. : 9842239350 		AABFT5612J

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) SODA ASH COMMERCIAL GRADE Description : SODA ASH COMMERCIAL GRADE() Specification : C.F.SPECN.39.0 Dt.29-06-2006 (REV. No. 1) Dt.01-12-2016 R Estab
2) SODA ASH TECH Description : SODA ASH TECH() Specification : SODA ASH (TECHNICAL) SPECIFICATION:IS 251 - 1998 (FOURTH REVISION) REAFFIRMED 2015 R Estab
Category : s
Grade : 3
Size : S
4626 TRIESS ENGINEERS
NEW NO.-3, PLOT NO.-35, GANESH NAGAR 5TH STREET, G.K. INDUSTRIAL ESTATE ALAPPAKKAM, PORUR CHENNAI T.N.
PIN1 : 600116
Phone No. : 9444042729 		ABEPS1123M

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) 20.UNIT BURST CONTROL DRG NO:1005-007791 R5 Description : 20.UNIT BURST CONTROL DRG NO:1005-007791 R5() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
4627 NEMANI POLY PRODUCTS (P)LTD.
UNIT-II,SHED-B,PLOT 24-A,BAJRA NG BALI AUDYOGIC ASTHAN,BATTA, AREA,PANKI UDYOG NAGAR,KANPUR KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : 0512-3291348 		AAACN4829R

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) SPRING MAIN TO DRG. NO.32-0106 Description : SPRING MAIN TO DRG. NO.32-0106() Specification : SPRING MAIN TO DRG. NO.32-0106 MATERIAL SPRING STEEL, Gr- 4, IS: 4454 (Pt-1)-81 C Estab
Category : ddp
Grade : 3
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) SPRING MAIN TO DRG. NO.32-0106 Description : SPRING MAIN TO DRG. NO.32-0106() Specification : SPRING MAIN TO DRG. NO.32-0106 MATERIAL SPRING STEEL, Gr- 4, IS: 4454 (Pt-1)-81 C Estab
Category : ddp
Grade : 3
Size : S
4628 PONDY OXIDES & CHEMICALS
KRM CENTRE 4TH FLOOR, 2, HARRINGTON ROAD, CHETPET CHENNAI TAMILNADU
PIN1 : 600031
Phone No. : 04442965455 		CHEPO2071G

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Litharge (Lead Mono Oxide) Description : Litharge (Lead Mono Oxide)() Specification : LITHARGE (LEAD MONOXIDE) CONFORMING TO THE FOLLOWING SPECN. A) APPEARANCE: YELLOW POWDER B) LEAD MONOXIDE (PbO) CONTENT : MIN. 96%. C) ALKALINE IMPURITIES AS (CaO): 0.002% MAX. D) GRANULATION: MAX.5.0% RETAINED ON 250 MICROMTER I.S.SIEV R Estab
Category : dp
Grade : 3
Size : S
4629 Radiant Organics Pvt Ltd
6 Juhu Sea View Juhu tara Road Sanatcruz west Mumbai Maharashtra
PIN1 : 400049
Phone No. : 26609358
GSTIN : 27AACCR4078A2ZK 		MUMRO7292F

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) ACETIC ANHYDRIDE FOR HMX PLANT1[10]() Specification : ACETIC ANHYDRIDE : PURITY - 97.5% MIN. COLOUR - 10 APHA MAX AND SUSPENDED MATTER - NIL. R Estab
Category : p
Grade : Grade III
Size : M
4630 ENTREMONDE POLYCOATERS LIMITED
KILFIRE HOUSE, 1st FLOOR, C-17, DALIA INDUSTRIAL AREA, OPP. LAXMI INDUSTRIAL ESTATE, OFF LINK ROAD ANDHERI WEST MUMBAI MAHARASHTRA
PIN1 : 400053
Phone No. : 022-26732563 		AAACE0944L

Download 		1) Ordnance Equipment Factory Hazaratpur

[ENR Registration]
Name Specification Use Status
1) FABRIC NYLON PU COATED 250 GSM WHITE 100 CM() Specification : DMSRDE/T&GS/89/377 (d) R Estab
Category : ddp
Grade : 3
Size : S
4631 MAHAVEER CHEMICAL INDUSTRIES
54, AKS NAGAR PONNAIYARAJAPURAM, COIMBATORE TAMIL NADU
PIN1 : 641001
Phone No. : 0422-2470367
GSTIN : 33AAAHR5227E2ZI 		AAAHR5227E

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CARBON BLACK Description : CARBON BLACK() Specification : CARBON BLACK. SPECN: JSS 6810-81: 2016 (REV No.3) DS CAT No.:- CARBON BLACK TYPE-4 6810-001130 DC No. 5490-ME DT. 24-09-2016 R Estab
Category : s
Grade : 3
Size : S
4632 VITZRO CELL
VITZRO BUILDING 4TH FLOOR 27-16 GUNJA-DONG KOREA KOREA
PIN1 : 0
Phone No. : 082 220243247 		AAAAAAAAAA

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) AMPOULE RESERVE BATTERY AS PER MTPF DRG NO 770 22 33 00 I AMPOULE BATTERY VITZROCELL VCG1525 10 XX Description : AMPOULE RESERVE BATTERY AS PER MTPF DRG NO 770 22 33 00 I AMPOULE BATTERY VITZROCELL VCG1525 10 XX() Specification : AMPOULE RESERVE BATTERY AS PER MTPF DRG.NO.770-22-33-00 i.e. AMPOULE BATTERY VITZROCELL VCG1525 10-XX C Estab
Category : ddp
Grade : 1
Size : L
4633 SK Dynamics Pvt.Ltd.
B 5 Industrial Estate Near Ram Nagar Roorkee Uttarakhand
PIN1 : 247667
Phone No. : 263616
GSTIN : 05AAKCS1322G1ZP 		MRTS01805G

Download 		1) Small Arms Factory
Name Specification Use Status
1) Magnet Permanent for Firing Device[70]() Specification : Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768 C Nonestab
Category : p
Grade : Grade III
Size : S
4634 SHENDE SALES CORPORATION
470 SADASHIV PETH, OPP. NEW ENGLISH SCHOOL, TILAK ROAD, CROSS LANE, PUNE MAHARASHATRA
PIN1 : 411030
Phone No. : 02024488005
GSTIN : 27AAAPW8417B1ZQ 		PNEP14877C

Download 		1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) RUBBER U SEAL MOULDING ON METAL RINGS Description : RUBBER U SEAL MOULDING ON METAL RINGS() Specification : AS PER GCF SPECIFICATION C Estab
Category : p
Grade : 3
Size : S
4635 GAJ CHEMICALS
OLD No. 23, NEW No.82, NAINIAPPA NAICKEN STREET, PARK TOWN, CHENNAI TAMIL NADU
PIN1 : 600003
Phone No. : 044-25354330 		ADUPG0316Q

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) BARIUM NITRATE GR I Description : BARIUM NITRATE GR I() Specification : BARIUM NITRATE GR I -RETAINED ON 125 MICROMETRE IS SIEVE-NIL SPECN:JSS 6810-59:2016 DC-5480-ME DT. 24/09/2016. (REVISION No.4) R Estab
Category : s
Grade : 3
Size : S
4636 ALLIED ENGINEERS
61-O-1,BLOCK,DEVKI NAGAR YASODA NAGAR,KANPUR-208011 KANPUR UTTAR PRADESH
PIN1 : 208011
Phone No. : 7408898031
GSTIN : 09AAVFA6914E1Z6 		AAVFA6914E

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) PRESS TOOL & DIES Description : PRESS TOOL & DIES() Specification : PRESS TOOL FOR BASE OF HANDLE S Estab
2) ARM (155mm FH Gun) Description : ARM (155mm FH Gun)() Specification : AS PER DRG. NO. 6363094 C Estab
3) BEARING LS-11 Description : BEARING LS-11() Specification : BEARING, GEAR WHEEL C Estab
4) BARREL BLANK Description : BARREL BLANK() Specification : REVOLVER BODY MK-III TITANIUM C Estab
5) BOLTS Description : BOLTS() Specification : AS PER DRG. NO. 6349451 C Estab
6) BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138. Description : BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138.() Specification : BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138. REQD FOR 155MMM FH GUN. C Estab
7) BRACKET DRG IWP 1031 Description : BRACKET DRG IWP 1031() Specification : BRACKET DRG IWP 1031 C Estab
8) TOOLS Description : TOOLS() Specification : BROACHING TOOL FOR T-72 SAG CAM S Estab
9) CASE OF FIRING UNIT Description : CASE OF FIRING UNIT() Specification : AS PER DRG. NO. 3053014 C Estab
10) NUT, BOLTS, WASHERS Description : NUT, BOLTS, WASHERS() Specification : CASTLE NUT C Estab
11) COVER CATCH Description : COVER CATCH() Specification : AS PER DRG.NO. 161-712 C Estab
12) PIN Description : PIN() Specification : CYLINDRICAL PINDRG NO. 10277454 C Estab
13) FIXTURES, DESIGN & DEVELOPMENT Description : FIXTURES, DESIGN & DEVELOPMENT() Specification : DESIGN AND DEVELOPMENT OF FIXTURE R Estab
Category : s
Grade : 3
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) FIXTURES, DESIGN & DEVELOPMENT Description : FIXTURES, DESIGN & DEVELOPMENT() Specification : DESIGN AND SUPPLY OF FIXTURE E Estab
2) DIES Description : DIES() Specification : SET OF FORGING DIES FOR T-90 ORD, E Estab
3) EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN. Description : EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.() Specification : EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN. C Estab
4) FABRICATION & MACHINING Description : FABRICATION & MACHINING() Specification : FINISH MACHINING OF LEVER E Estab
5) COVER CATCH Description : COVER CATCH() Specification : FINISH MACHINING REAR CATCH HOLDER E Estab
6) FINISH MACHINING OF VARIOUS MECH. COMPONENTS Description : FINISH MACHINING OF VARIOUS MECH. COMPONENTS() Specification : FINISH MACHINING OF BALANCE E Estab
7) BRACKET Description : BRACKET() Specification : FINISH MACHINING OF BRACKET C Estab
8) PRE MACHINING OF STOP CARTRIDGE BASE Description : PRE MACHINING OF STOP CARTRIDGE BASE() Specification : FINISH MACHINING OF STOP CARTRIDGE BASE C Estab
9) MACHINING OF COMPONENTS Description : MACHINING OF COMPONENTS() Specification : MACHINING OF STOP C Estab
10) FIXTURES Description : FIXTURES() Specification : FIXTURE FOR FINISH MACHINE EXTRACTOR LOWER E Estab
11) INSULATOR Description : INSULATOR() Specification : INSULATOR ILG-155/DS CAT 5970-002105 C Estab
12) ALL PLASTIC COMPONENTS Description : ALL PLASTIC COMPONENTS() Specification : ITEM C Estab
13) PIN LOCKING PIN FIRING Description : PIN LOCKING PIN FIRING() Specification : LOCKING LUG C Estab
14) BRAKE FLUID Description : BRAKE FLUID() Specification : AS PER SPECIFICATION E Estab
15) CYLINDER Description : CYLINDER() Specification : MACHINING OF FIN CYLINDER C Estab
16) NOZZLE AS PER DRG NO. 2A46-01-05. Description : NOZZLE AS PER DRG NO. 2A46-01-05.() Specification : NOZZLE AS PER DRG NO. 2A46-01-05. C Estab
17) INSULATORS/PLUGS/LOCK/BUSHING MATERIALS Description : INSULATORS/PLUGS/LOCK/BUSHING MATERIALS() Specification : OIL PLUG DRG. NO. 10356154 C Estab
18) PIN Description : PIN() Specification : PARALLEL PIN N4-13-10X30 C Estab
19) COVER & PLATE Description : COVER & PLATE() Specification : SECURING PLATE C Estab
20) PLUNGER Description : PLUNGER() Specification : AS PER DRG. NO.5340-015739IFL-7662 C Estab
21) PRESS TOOL & DIES Description : PRESS TOOL & DIES() Specification : PRESS TOOLS FOR EXTRACTOR UPPER AND LOWER S Estab
22) ALL TYPES OF HELICAL COMPRESSION, EXTENSION AND TORSION SPRING Description : ALL TYPES OF HELICAL COMPRESSION, EXTENSION AND TORSION SPRING() Specification : RETAINER HELICAL C Estab
23) MACHINING Description : MACHINING() Specification : DISC C Estab
24) ARM (155mm FH Gun) Description : ARM (155mm FH Gun)() Specification : SET OF BROACH FORM COMPONENT ARM C Estab
25) SAFETY CATCH FIRING MECH ASSY Description : SAFETY CATCH FIRING MECH ASSY() Specification : SAFETY CATCH AS PER DRG.NO. 176-8148 C Estab
26) SCREW Description : SCREW() Specification : STOP SCREW DRG NO. 155/COMP.-5/181 C Estab
27) PRESSED MACHINED TOOLS & FIXTURES Description : PRESSED MACHINED TOOLS & FIXTURES() Specification : DESIGN AND DEVELOPMENT OF PRESS C Estab
28) MANUFACTURING OF COMPONENTS Description : MANUFACTURING OF COMPONENTS() Specification : SET OF BROACH FOR COMPONENT PRESSURE C Estab
29) HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS) Description : HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS)() Specification : SPLINE OF MILLING IN MACHINING INPUR S Estab
30) SPRING Description : SPRING() Specification : AS PER DRG.NO.161-491 C Estab
31) WASHER Description : WASHER() Specification : N5-35-12X16 C Estab
32) NUT, BOLTS, WASHERS Description : NUT, BOLTS, WASHERS() Specification : AS PER FGK REQUIREMENT C Estab
33) FINISH MACHINING OF VARIOUS COMPONENTS INVOLVING PRECISION MACHINING AND SUBASSEMBIES, SSEMBLIES THE Description : FINISH MACHINING OF VARIOUS COMPONENTS INVOLVING PRECISION MACHINING AND SUBASSEMBIES, SSEMBLIES THE() Specification : AS PER DRG. C Estab
Category : s
Grade : 3
Size : S
4637 JAIPUR STEEL STRIPS PVT. LTD.
E-776, ROAD NO-13 VISWAKARMA INDUSTRIAL AREA JAIPUR RAJASTHAN
PIN1 : 302013
Phone No. : 0512-2295042 		AAACJ6228L

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ST STRIP FOR LMG Description : ST STRIP FOR LMG() Specification : ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT). C Estab
2) STEEL STRIP 3.5MM THICK X140MM WIDE TO SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. STRAIGHTENED & IN STD. CUT LENGTH Description : STEEL STRIP 3.5MM THICK X140MM WIDE TO SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. STRAIGHTENED & IN STD. CUT LENGTH() Specification : SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. C Estab
Category : p
Grade : 3
Size : S
4638 JAI AUTO INDUSTRY
183, HSIDC,PHASE-2, INDUSTRIAL AREA KUNDLI (SONEPAT) HARYANA
PIN1 : 131028
Phone No. : 0130-2219592 		AAFPJ1363P

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) PROTECTOR FOR FIRST COPPER BAND TO OFAJ DRG NO SM 620C Description : PROTECTOR FOR FIRST COPPER BAND TO OFAJ DRG NO SM 620C() Specification : as per drawing C Estab
2) PROTECTOR FOR 2ND COPPER BAND TO OFAJ DRG NO SM 621C Description : PROTECTOR FOR 2ND COPPER BAND TO OFAJ DRG NO SM 621C() Specification : as per drawing C Estab
Category : ddp
Grade : 1
Size : S
4639 METDERM TREAT
15, MERCHANT INDUSTRIAL ESTATE NO.-1 WALIVE, VASI(EAST) THANE MAHARASHATRA
PIN1 : 401208
Phone No. : 90250-4860116 		AFTOM2519Q

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED AS PER DRG NO. 0204-03-03-00-07- 000-00DC Description : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED AS PER DRG NO. 0204-03-03-00-07- 000-00DC() Specification : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED AS PER DRG NO. 0204-03-03-00-07- 000-00DC R Estab
Category : p
Grade : 3
Size : S
4640 R.N. INDUSTRIES
PLOT NO.648 VIJAY NAGAR (OLD) RANJHI JABALPUR M.P.
PIN1 : 482010
Phone No. : 07612743368 		482010R161

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CATCH LOCK ASSY DRG.NO. IA-1053 4 CO (9911358061) Description : CATCH LOCK ASSY DRG.NO. IA-1053 4 CO (9911358061)() Specification : CATCH LOCK ASSY AS PER DRG NO.IA-1053 SHT 1,SHT 2,SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH,2-LINK,3-HOOK PLATE,4-HASP C Estab
2) PLATE ANGLE 64MM X 64MM FOR CRATES (9911358104) Description : PLATE ANGLE 64MM X 64MM FOR CRATES (9911358104)() Specification : DRG.NO. ISV 8 DC NO. 35855-A DT. 23/11/1994 R Estab
3) CENTRAL TUBE FOR BOMB 450 KG LF 9911358138 Description : CENTRAL TUBE FOR BOMB 450 KG LF 9911358138() Specification : CENTRAL TUBE WELDED TO DRG NO.TRD-212314. (DET-16 AEDE-2122 ) FOR BOMB 450 KG HSLD RDZ. R Estab
4) CENTRAL TUBE FOR BOMB LBS MK 11 RDZ LF 9911358218 Description : CENTRAL TUBE FOR BOMB LBS MK 11 RDZ LF 9911358218() Specification : CENTRAL TUBE FOR BOMB LBS MK 11 RDZ WITH REDUCED NEQ(NE&TE) TO DRG NO:khs-210305. R Estab
Category : p
Grade : 3
Size : S