1) HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF & COUNTER STIFFNER (OEM is M/s Flexituff Ventures International Ltd., New Delhi)()
Specification : AS PER APPENDIX'E'&'F'OF IND/TC/3838(K)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
[ENR Registration]
Name
Specification
Use
Status
1) HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF & COUNTER STIFFNER
Description : HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF & COUNTER STIFFNER()
Specification : AS PER APPENDIX "E' & 'F' OF IND/TC/3838 (K)
R
Estab
Category : s
Grade : 3
Size :
O
1) Ordnance Equipment Factory
[ENR Registration]
Name
Specification
Use
Status
1) HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER
Description : HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER()
Specification : AS PER APPENDIX ‘E’ & ‘F’ OF IND/TC/3838(K)
R
Estab
Category : s
Grade : 1
Size :
O
1) Ordnance Equipment Factory
[ENR Registration]
Name
Specification
Use
Status
1) HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER
Description : HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER()
Specification : AS PER APPENDIX ‘E’ & ‘F’ OF IND/TC/3838(K)
1) PIVOT BUTT TO DS CAT NO 1005 000879 IN FINISHED CONDITION FOR CARBINE 9MM
Description : PIVOT BUTT TO DS CAT NO 1005 000879 IN FINISHED CONDITION FOR CARBINE 9MM()
Specification : PIVOT BUTT TO DS/CAT NO.1005-000879 IN FINISHED CONDITION.DC(I) NO. 26883-SA DT.04.07.16.
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) WASHER FRONT GUIDE RIGHT FOR MAG
Description : WASHER FRONT GUIDE RIGHT FOR MAG()
Specification : DS CAT NO 5310-011400 DC(I) NO 27105-SA DT-20/06/2017 IN FINISHED CONDITION.
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Heavy Vehicle Factory
[ENR Registration]
Name
Specification
Use
Status
1) JACKET ASSY DRG TO 6206809022
Description : JACKET ASSY DRG TO 6206809022()
Specification : 2A26CB06CB
C
Estab
2) JACKET SECTION TO 6201020035
Description : JACKET SECTION TO 6201020035()
Specification : 2A46M.106-1
C
Estab
3) JACKET SECTION TO 6201020036
Description : JACKET SECTION TO 6201020036()
Specification : 2A46M.106-2
C
Estab
4) JACKET SECTION TO 6201020045
Description : JACKET SECTION TO 6201020045()
Specification : 2A46M.106-4
C
Estab
5) THERMAL JACKET ASSEMBLY TO 6201020042
Description : THERMAL JACKET ASSEMBLY TO 6201020042()
Specification : 2A46M.CB106.CB
C
Estab
6) JACKET SECTION TO 6201020037
Description : JACKET SECTION TO 6201020037()
Specification : 2A46M.106-3
C
Estab
Category : p
Grade : 2
Size :
S
4603
NEETA INDUSTRIES
D/16 MAHAVIR JYOT GOVARDHAN NAGAR L B S MARG MULUND Maharashtra
PIN1 : 400080
Phone No. : 21645992 GSTIN : 27ACCPS2075D1ZQ
1) ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT 1105 TO DRG NO IMPD0993 WASHER DIA 11 POINT 5 TO DRG NO IMPD0994 HEX NUT M 10 TO DRG NO IMPD0995 AND LOCK NUT M10 FOR SR NO 1 TO DRG IMPD 0996[00]()
Specification : ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT-1105 TO DRG NO. IMPD0993, WASHER DIA 11.5 TO DRG. NO.IMPD0994, HEX NUT M-10 TO DRG. NO. IMPD0995 AND LOCK NUT M10 FOR SR. NO. 1 TO DRG. IMPD 0996.
1) INDUCTION HARDENING OF SECTOR 675 54 190
Description : INDUCTION HARDENING OF SECTOR 675 54 190()
Specification : INDUCTION HARDENING OF SECTOR DRG No. 675- 54-190
C
Estab
2) INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438
Description : INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438()
Specification : INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438 [ FOR FIRST TIME PROCUREMENT FIRM SHOULD DO TRIAL, TESTING OF FIRST SHIELD BY CUTTING/SECTIONING OF FIRST INDUCTION HARDENING SHIELD, PREPARING TEST PIECE AND HARDNESS TES
C
Estab
Category : p
Grade : 3
Size :
M
4605
VIJAYA TRADING CORPORATION
SR. NO 54, 2A/2B, SHOP NO 4, YASHASHREE PARK APARTMENT, NEAR MAIN BUS STOP, HINGANE, KAVENAGAR PUNE MAHARASHTRA
PIN1 : 411052
Phone No. : 9423157589
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
2) LINK HOLDING END FOR BOX H2A[07]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Estab
3) BOLT & CUP FOR PRB DRUM[07]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
4) CATCH FOR BOX SM 171K, 651J, 642[07]()
Specification : AS PER DRG./SPECIFICATION
C
Nonestab
5) BRACKET MIDDLE FOR BOX C-51A AND C52A[07]()
Specification : BRACKET MIDDLE FOR BOX C-51A & BOX C-52A
AS PER DRG.NO.OFB/C/1363,DET-12 & OFB/C/1364,DET-10
REF.DRG.NO.ISV-2033 DC 36629-A DATED 06/01/2000.
E
Nonestab
6) BRACKET CROSS FOR BOX C51A[07]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
7) PIECE PACKING END FOR BOX C-43[07]()
Specification : PIECE PACKING END FOR BOX C-43
R
Nonestab
8) PIECE PACKING BOTTOM BOX-C43A[07]()
Specification : PIECE PACKING BOTTOM BOX-C43A
R
Nonestab
9) RIVET MS FLAT 4 X 10 MM[07]()
Specification : RIVET MS FLAT 4 X 10 MM
R
Nonestab
10) HINGE PIN DRG. NO. OFB/C/700[07]()
Specification : HINGE PIN DRG. NO. OFB/C/700
R
Estab
11) BRACKET SIDE FOR BOX C-51A[07]()
Specification : BRACKET SIDE FOR BOX C-51A
R
Nonestab
12) SUPPORT FOR BRACKET SIDE C-51A[07]()
Specification : SUPPORT FOR BRACKET SIDE C-51A
R
Nonestab
13) BRACKET TOP FOR BOX C 51-A[07]()
Specification : BRACKET TOP FOR BOX C 51-A
R
Nonestab
14) GUIDE ANGLE FOR BOX C-51A[07]()
Specification : GUIDE ANGLE FOR BOX C-51A
R
Nonestab
15) STOPPER REAR FOR BOX C-51 A[07]()
Specification : STOPPER REAR FOR BOX C-51 A
R
Nonestab
16) S.M. FLAT 5 X 25 MM TO IS-1079-94[07]()
Specification : S.M. FLAT 5 X 25 MM TO IS-1079-94
R
Nonestab
17) HINGE FOR BOX SM 171 K 642 C[07]()
Specification : HINGE FOR BOX SM 171 K 642 C
R
Nonestab
18) SUB ASSEMBLY OF LINK & HANDLE[07]()
Specification : SUB ASSEMBLY OF LINK & HANDLE
R
Nonestab
19) BRACKET FRONT (FOR SHELL) C-52[07]()
Specification : BRACKET FRONT(FOR SHELL) C-52
R
Nonestab
20) MIDDLE BRACKET (FRONT) C-52-A[07]()
Specification : MIDDLE BRACKET (FRONT) C-52-A
R
Nonestab
21) BRACKET REAR FOR BOX C-52-A[07]()
Specification : BRACKET REAR FOR BOX C-52-A
R
Nonestab
22) BIGGER BRACKET FOR BOX SM+-642-C[07]()
Specification : AS PER OFBH DRG
R
Nonestab
23) SMALLER BRACKET FOR BOX SM-642-C[07]()
Specification : AS PER OFBH DRG AND SPECIFICATION
R
Nonestab
Category : p
Grade : Grade III
Size :
S
4609
Eastern Yarns Pvt. Ltd.
503, City Centre, The Mall, KANPUR UTTAR PRADESH
PIN1 : 208001
Phone No. : 05122330156
1) HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER
Description : HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER()
Specification : AS PER APPENDIX 'E' & 'F' OF IND/TC/3838(K)
1) INTERNAL FITMENTS FOR BOX M-41A
Description : INTERNAL FITMENTS FOR BOX M-41A()
Specification : INTERNAL FITMENTS FOR BOX M-41A TO DESIGNER'S REF.CQA(A)/AMN/3306 PART NO ISV 302 SA DC-37127-A DT.30.07.07(EACH SET CONSIST OF(1) TOP & BOTTOM PIECE TO PART NO ISV-2112 DC-36995 A DT.13.01.05=2 NOS (2) SIDE PIECES(BIG) TO PART NO ISV 211
C
Estab
2) DISC FOR FUZE 162 MARK-8 & DA5A
Description : DISC FOR FUZE 162 MARK-8 & DA5A()
Specification : CQA(A)/AMMN/3042 DET.3 PART NO.ISV-2018. DC-36449-A Dt.30-07-98.
C
Estab
3) DISC POLYTHENE FOAM AVERAGE DENSITY 20 TO 30
Description : DISC POLYTHENE FOAM AVERAGE DENSITY 20 TO 30()
Specification : DISC POLYTHENE FOAM AVERAGE DENSITY 20 TO 30 KG/METER CUBE OD 55x6MM THICK.
C
Estab
4) DISC POLYTHENE FOAM OF AVERAGE DENSITY 20
Description : DISC POLYTHENE FOAM OF AVERAGE DENSITY 20()
Specification : DISC POLYTHENE FOAM OF AVERAGE DENSITY 20 TO 30KG/METER CUBE OD-55MM x 3MM THICK.
1) CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER Description : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER()
Specification : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Dehradun
[ENR Registration]
Name
Specification
Use
Status
1) CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER Description : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER()
Specification : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Dehradun
[ENR Registration]
Name
Specification
Use
Status
1) CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER Description : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY. A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER()
Specification : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WILL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.
C
Estab
Category : p
Grade : 2
Size :
S
4618
ASHA ENTERPRISES
439/17 MS NAICKER FOURTH STREET, GRAMA NEDUM SALAI, SOLINGANALLUR, CHENNAI TAMIL NADU
PIN1 : 600119
Phone No. : 9962545995 GSTIN : 33AEGPT3047N1Z5
1) DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA
Description : DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA()
Specification : DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA. DCI 35983-A DT.29.07.95. MATERIAL: MILL BOARD TO JSS-9310-01-2014 REV-3 DC.5290 ME DTD-16-12-14
C
Estab
2) DISC PWF(0.79") 20.07MM DIA,0.051MM THICK TO SPECN
Description : DISC PWF(0.79") 20.07MM DIA,0.051MM THICK TO SPECN()
3) DISC TO DRG.NO.2-013535
Description : DISC TO DRG.NO.2-013535()
Specification : DISC TO DRG.NO.2-013535/53-00-482M/14, DC NO. 36785-A, DT.08.10.2001.
C
Estab
4) DISC TO DRG.NO.FD 537 TO DRG. PART NO
Description : DISC TO DRG.NO.FD 537 TO DRG. PART NO()
Specification : DISC TO DRG.NO.FD 537 TO DRG. PART NO.QX-324, DC-36103-A DT.29.3.96.
C
Estab
5) MIIL BOARD (WAXED),290*200*2.5(MM) (TOP SUPPORT) USING MATERIAL MILL BOARD TO
Description : MIIL BOARD (WAXED),290*200*2.5(MM) (TOP SUPPORT) USING MATERIAL MILL BOARD TO()
Specification : MIIL BOARD (WAXED),290*200*2.5(MM) (TOP SUPPORT) USING MATERIAL MILL BOARD TO JSS-9310-01-2014 REV-3 DC NO.5290-ME DT.16.12.14 & PARAFFIN WAX AMMN.TO JSS- 9160-09:2010 REV-1 DC:5024-ME DT.01.08.11
C
Estab
6) MILL BOARD DISC TO SIZE:93MM DIA x 3MM THICK (WAXED),
Description : MILL BOARD DISC TO SIZE:93MM DIA x 3MM THICK (WAXED),()
Specification : MILL BOARD DISC TO SIZE:93MM DIA x 3MM THICK (WAXED), DRG.NO:CIA/AMN/2650, DRG.PART NO.ISV-482 GA DC NO.37330-A, DT.04.02.2013 , ITEM NO. 5. MATERIAL:MILL BOARD TO JSS:9310-01-2014-Rev-3 DC-5290 ME DT.16.12.2014.
C
Estab
7) PAPER WHITE FINE,SIZE:L-762 X W-508 (MM),SUBSTANCE 42-46 GRRAM/SQ.METRE
Description : PAPER WHITE FINE,SIZE:L-762 X W-508 (MM),SUBSTANCE 42-46 GRRAM/SQ.METRE()
Specification : PAPER WHITE FINE,SIZE:L-762 X W-508 (MM),SUBSTANCE 42-46 GRRAM/SQ.METRE AND THICHNESS: 0.051 +/- 0.005 MM TO SPECN.JSS-9310-06: 2002,DC NO:3738-ME, DT.17.09.2002 (REAFFIRMED 2011)
C
Estab
8) STRENGTHENED COVER TO DRG.3-022483
Description : STRENGTHENED COVER TO DRG.3-022483()
Specification : STRENGTHENED COVER TO DRG.3-022483 /54-bH-482/12,DC NO.36134-A, DT.4.07.96
C
Estab
9) DISC PAPER WHITE
Description : DISC PAPER WHITE()
