Specification : TYPE MEDIUM SPEED , FINE GRAIN , HIGH CONTRAST EQUIVALENT TO IRF-150(INDU) OR STRUCTURIX D7(AGFA), INDUSTREX AX,AA )KODAK )
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100.
Description : X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100.()
Specification : X-RAY FILM ROLL, WIDTH-17 INCH x 200 FEET LENGTH, FILM SPEED-100. DIMENSION OF PAPER CYLINDER ON WHICH FILMS TO BE ROLLED: ID - 77+/-2.0 MM, OD - 90.0 MM MAX., LENGTH - 430+/-10.0 MM AND OVERALL OD OF X-RAY FILM ROLL - 150MM MAX.
P
Estab
Category : s
Grade : 3
Size :
S
4842
NEWCO AUTO PVT LTD
PLOT NO. 1 & 2 P PHASE- V , ON USHA CROSIING INDUSTRIAL AREA GAMHARIA JAMSHEDPUR Jharkhand
PIN1 : 832108
Phone No. : 2249470 GSTIN :
20AACCS3968E1ZL
1) OXYGEN FREE HIGH CONDUCTIVITY COPPER STRIP HAVING PURITY 99 point 95 MIN TO SIZE 110 MM WIDE X 6MM THICK IN 2 Point 5 TO 3 METER LONG
Description : OXYGEN FREE HIGH CONDUCTIVITY COPPER STRIP HAVING PURITY 99 point 95 MIN TO SIZE 110 MM WIDE X 6MM THICK IN 2 Point 5 TO 3 METER LONG()
Specification : OXYGEN FREE HIGH CONDUCTIVITY COPPER STRIP HAVING PURITY 99.95 MIN TO SIZE 110 MM WIDE X 6MM THICK IN 2.5 TO 3 METER LONG
C
Estab
Category : p
Grade : 3
Size :
O
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS STRIP 102 X 3 66 MM BS2871 CZ126 LF 0717560694
Description : BRASS STRIP 102 X 3 66 MM BS2871 CZ126 LF 0717560694()
Specification : BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED).
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) OXYGEN FREE COPPER STRIP TO SPECN BS 2870 1980 GRADE C103 CONDITION 1 2 H HAVING STRAIGHT LENGTH OF 2 5 TO 3 MT SIZE 92 1MM WIDE X 4 0 1 MM THICK
Description : OXYGEN FREE COPPER STRIP TO SPECN BS 2870 1980 GRADE C103 CONDITION 1 2 H HAVING STRAIGHT LENGTH OF 2 5 TO 3 MT SIZE 92 1MM WIDE X 4 0 1 MM THICK()
Specification : OXYGEN FREE COPPER STRIP TO SPECN BS 2870 1980 GRADE C103 CONDITION 1 2 H HAVING STRAIGHT LENGTH OF 2 5 TO 3 MT SIZE 92 1MM WIDE X 4 0 1 MM THICK
R
Estab
Category : ddp
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS STRIP 22X1 02 MM LF 0710664345
Description : BRASS STRIP 22X1 02 MM LF 0710664345()
Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) 0700100007 COPPER ROD 6 POINT 5 MM DIA 0 POINT 09 MM IN
Description : 0700100007 COPPER ROD 6 POINT 5 MM DIA 0 POINT 09 MM IN()
Specification : BS:2874-1986
R
Estab
Category : p
Grade : 3
Size :
M
1Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) BRASS STRIP TO SIZE:18+/-0.2MM(W)* 0.7+/-0.01MM(T)
Description : BRASS STRIP TO SIZE:18+/-0.2MM(W)* 0.7+/-0.01MM(T)()
Specification : BRASS STRIP TO SIZE- 18+/-0.2MM(W) x 0.7+/-0.01MM(T) TO BS 2870, CZ-106,1/4 HARD. OXIDIZATION, BEND & DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE [PACKING CONDITION - EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLO
Specification : COLD ROLLED STEEL STRIP (STEEL TAPE BANDING) 12.7 MM WIDTH X 0.45MM THICK(26SWG) IN C.R.STEEL STRIPPING SOFT BLUE FINISHHAVE TENSILE STRENGTH 60 TO 80KG/MM SQR WITH SHEAR EDGE IN COIL,OILED WITH SHELL EXISTS 256 WITH WAXED PAPER AND RESI
R
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036
Description : Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036()
Specification : Steel strip cold rolled closed annealed bright finished 3.56(+0.10/-0.00) mm thick X 80 +/-0.25mm wide in length of 2 mtrs to specn:- IS-513:2008 (Fifth Revision) Grade "DD" Temper 5(Annealed)
R
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) HIGH TENSILE STEEL STRAP
Description : HIGH TENSILE STEEL STRAP()
Specification : HIGH TENSILE STEEL STRAP TO IS 5872 -1990, GRADE-1, REAT-2010 SUITABLY BLUED OR RUST PROOFED (SIZE - 19.05 MM WIDTH x 0.63 MM THICK) NOTE - MAXIMUM OUTER DIAMETER OF THE ROLL - 600 MM, INNER DIAMETER OF THE ROLL - 300 PLUS 10 MM, WEIGHT
Specification : POLY ACRYL AMIDE (POLY ELECTROLYTE & IS USED AS FLOCCULATION ADDITIVE FOR CLEANING OF INDUSTRIAL WASTE WATER & DEWATERING OF SLUDGE) WITH FOLLOWING SPECN.:- (1) APPEARANCE: LARGE GRAINED FREE FLOWING POWDER. (2) WATER SOLUBILITY: TOTALLY
P
Estab
Category : s
Grade : 3
Size :
S
4850
PACIFIC PLASTIC INDUSTRIES
A-267, 2ND FLOOR, OKHLA, INDUSTRIAL AREA PHASE-1 NEW DELHI NEW DELHI
PIN1 : 110020
Phone No. : 9868107595
1) POLYTHENE BAG TO DRG.CIA/AMN/2185
Description : POLYTHENE BAG TO DRG.CIA/AMN/2185()
Specification : POLYTHENE BAG TO DRG.CIA/AMN/2185, DET.NO-10, PART NO.ISV-1627, DC NO.36832-A, DT.10.05.02. MATERIAL- LOW DENSITY POLYETHYLENE TYPE-1 TO SPECN JSS-9330-03 -2014 REV-3 DC NO.5292 ME, DT.16.12.14, SIZE-1170 MM x 300 MM x 0.5 MM THICK.
C
Estab
Category : s
Grade : 3
Size :
S
4853
VINOD MEDICAL SYSTEM PVT. LTD.
KUNJ B-1&2, SAI NAGAR, NEAR DEVENDRA NAGAR RAILWAY CROSSING RAIPUR C.G
PIN1 : 492099
Phone No. : 0771-4214421 GSTIN :
22AAACV8457B1ZK
1) X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100.
Description : X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100.()
Specification : X-RAY FILM ROLL, WIDTH-17 INCH x 200 FEET LENGTH, FILM SPEED-100. DIMENSION OF PAPER CYLINDER ON WHICH FILMS TO BE ROLLED ID - 77+/-2.0 MM, OD - 90.0 MM MAX., LENGTH - 430+/-10.0 MM AND OVERALL OD OF X-RAY FILM ROLL - 150MM MAX.
1) HIGH TENSILE STEEL STRAP
Description : HIGH TENSILE STEEL STRAP()
Specification : HIGH TENSILE STEEL STRAP TO IS 5872 -1990,GRADE-1, REAT-2010-SUITABLY BLUED OR RUST PROOFED (SIZE - 19.05 MM WIDTH x 0.63 MM THICK) NOTE - MAXIMUM OUTER DIAMETER OF THE ROLL - 600 MM, INNER DIAMETER OF THE ROLL - 300+10 MM, WEIGHT OF ON
1) CONVERSION FORGING TO DRG No64C 2008 200 G3 REQD FOR OUTER RING TO DRG No 2A42 02 008 C2008 RAW MATERIAL STEEL ROUND 34mm DIA WILL BE SUPPLIED BY OFT[70]()
Specification : AS PER TE
C
Estab
2) CONVERSION FORGING TO DRG NO 64C 2009 200 G3 REQD FOR INNER RING TO DRG NO 2A42 02 009 C2009 RAW MATERIAL STEEL ROUND 34mm DIA WILL BE ISSUED BY OFT[70]()
Specification : AS PER TE
C
Estab
3) CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR PISTON C3004 RAW MATERIAL STEEL ROUND 50mm DIA WILL BE SUPPLIED BY OFT[70]()
Specification : AS PER TE
C
Estab
4) CONVERSION FORGING TO DRG NO 64C 3001 200 D3 REQUIRED FOR SLIDER C3001[70]()
Specification : AS PER TE
C
Estab
5) CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42 03 015 C 3015[70]()
Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Guide Rod Finish as per drawing no SK 6504 TE[70]()
Specification : Guide Rod Finish as per drawing no SK 6504 TE
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
2) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
3) Cleaning Rod Drg No SK 6574 TE[70]()
Specification : Cleaning Rod Drg No. SK- 6574/ TE
C
Nonestab
4) RIVET SK 6529 TE[70]()
Specification : RIVET SK- 6529/ TE
C
Nonestab
5) Pin SK 6508 TE[70]()
Specification : Pin SK- 6508 /TE
C
Nonestab
6) Cleaning Rod with Brush and Pull Through TO DRG No SK 4142[70]()
Specification : Cleaning Rod with Brush and Pull Through TO DRG No SK 4142
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MFG AND SUPPLY OF TUBE RETURN SPRING TO DRG NO ICR 1311 WITH OFT MATERIAL DC NO 27069 SA DT 05 05 2017 DS CAT NO 1005 001642 FOR RIFLE SLR[10]()
Specification : MFG AND SUPPLY OF TUBE RETURN SPRING TO DRG NO ICR 1311 WITH OFT MATERIAL DC NO 27069 SA DT 05 05 2017 DS CAT NO 1005 001642 FOR RIFLE SLR
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEAR SAFETY ICR 1281 L F 7011606010[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.5 6X30MM DRG NO. 0204-03-03-02-15-000-00DB[70]()
Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.5 6X30MM DRG NO. 0204-03-03-02-15-000-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) GUIDE ASSEMBLY 2 FOR CARBINE 5 56MM[70]()
Specification : GUIDE ASSEMBLY-2 TO DRG NO.AKC 09/2*. FOR CARBINE 5.56MM
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) RAIL SK 6548 TE[70]()
Specification : RAIL SK-6548/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001[70]()
Specification : PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001
P
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING[70]()
Specification : COVER ASSEMBLY MACHINING & SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL. CONSISTING OF COVER ASSY. MACHINING TO DRG NO. AKC-08/2* SLIDE RETRACTING TO DRG NO. AKC-08/7*.IN FINISHED CONDITION FOR AMOGH 5.56
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
2) RETAINER AS PER DRAWING NO SK 6521 TE[70]()
Specification : RETAINER AS PER DRAWING NO SK 6521 TE
C
Nonestab
3) COVER RETAINER ASSEMBLY DRG No SK 6667 TE[70]()
Specification : COVER RETAINER ASSEMBLY DRG No SK- 6667/ TE
C
Nonestab
4) ACCESSORIES IN CONTAINER ASSY FOR AK203[70]()
Specification : ACCESSORIES IN CONTAINER ASSY FOR AK-203 SAF DRG NO. SK 6601*TE
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) HEAD FLASH IGNITER TO DRG NO IQX 306 IN FC FOR FMC DC NO 35573 A DT 02 09 93[63]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) DISTANCE TUBE TO DRG NO F 1301 047281 D IN FC WITHOUT SURFACE TREATMENT[62]()
1) X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100.
Description : X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100.()
Specification : X-RAY FILM ROLL, WIDTH-17 INCH x 200 FEET LENGTH, FILM SPEED-100. DIMENSION OF PAPER CYLINDER ON WHICH FILMS TO BE ROLLED- ID - 77+/-2.0 MM, OD - 90.0 MM MAX., LENGTH - 430+/-10.0 MM AND OVERALL OD OF X-RAY FILM ROLL - 150MM MAX.
