List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3821 VIRAT ALUMINIUM
37 / 39, 2nd Carpenter Street, 2nd Carpenter Street, MUMBAI Maharashtra
PIN1 : 400004
Phone No. : 23840111 		AACPS4448N

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Al alloy rod 35mm ENAW7075 T6 LF 0611505135 Description : Al alloy rod 35mm ENAW7075 T6 LF 0611505135() Specification : Al alloy rod 35+/- 0.3mm in std. length of 2.0 to 3.0 meter to specification EN AW 7075-T6 R Nonestab
Category : s
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) AL ALLOY PLATE OF 3MM THICK X 1200 MM WIDTH X 1800 MM LENGTH OR ITS MULTIPLE LENGTH OF AL ALLOY GRADE 24345 HE 15 WP CONDITION AS PER IS 737 Description : AL ALLOY PLATE OF 3MM THICK X 1200 MM WIDTH X 1800 MM LENGTH OR ITS MULTIPLE LENGTH OF AL ALLOY GRADE 24345 HE 15 WP CONDITION AS PER IS 737() Specification : AL ALLOY PLATE OF 3MM THICK X 1200 MM WIDTH X 1800 MM LENGTH OR ITS MULTIPLE LENGTH OF AL ALLOY GRADE 24345 HE 15 WP CONDITION AS PER IS 737 R Estab
Category : ddp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ALUMINIUM ALLOY ROD Description : ALUMINIUM ALLOY ROD() Specification : AS PER SPECIFICATION R Estab
Category : dp
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ALUMINIUM ALLOY ROUND 17MM DIA TO SPECN.DTD-5124 Description : ALUMINIUM ALLOY ROUND 17MM DIA TO SPECN.DTD-5124() Specification : SPECN.DTD-5124 R Estab
Category : s
Grade : 3
Size : S
3822 S.S. ENTERPRISE
34, HAMID MUNSHI LANE HAMID MUNSHI LANE HOWRAH West Bengal
PIN1 : 711101
Phone No. : 033-26662926
GSTIN : 19AAOFS4775N1Z4 		AAOFS4775N

Download 		1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT Description : STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT() Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) 125 MM HEAT BODY Description : 125 MM HEAT BODY() Specification : AS PER DRAWING R Estab
2) Rib Assy.(Front , Middle & Rear) in F C for TU-1111. Description : Rib Assy.(Front , Middle & Rear) in F C for TU-1111.() Specification : Det-11 to Drg No.ARDE-2139 C Estab
3) FIN ASSEMBLY FOR TAIL UNIT 1111 Description : FIN ASSEMBLY FOR TAIL UNIT 1111() Specification : DRG.NO.ARDE 2139 ,DET.NO. 14 E Estab
4) Arming Wire Guide Description : Arming Wire Guide() Specification : Det.37 to Drg No.ARDE-9501-03 C Estab
5) SCREW Description : SCREW() Specification : AS PER REQUIREMENT C Estab
6) GAUGES Description : GAUGES() Specification : AS PER DRAWING S Estab
7) RIB - FRONT, MIDDLE & REAR FOR TU-1111 Description : RIB - FRONT, MIDDLE & REAR FOR TU-1111() Specification : DRG.NO.ARDE 2139, DET.NO.11 C Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Rib Assy.(Front , Middle & Rear) in F C for TU-1111. Description : Rib Assy.(Front , Middle & Rear) in F C for TU-1111.() Specification : Det-11 to Drg No.ARDE-2139 C Estab
2) FIN ASSEMBLY FOR TAIL UNIT 1111 Description : FIN ASSEMBLY FOR TAIL UNIT 1111() Specification : DRG.NO.ARDE 2139 ,DET.NO. 14 C Estab
3) ARMING WIRE GUIDE Description : ARMING WIRE GUIDE() Specification : DET NO-37 TO DRG.NO.ARDE 9501-03 C Estab
4) RIB - FRONT, MIDDLE & REAR FOR TU-1111 Description : RIB - FRONT, MIDDLE & REAR FOR TU-1111() Specification : DRG.NO.ARDE 2139, DET.NO.11 C Estab
Category : dp
Grade : 3
Size : S
3823 CMI AEROSPACE METAL INDUSTRIES PVT. LTD.
5-5-35/8, PLOT NO. 54, PRASHANTINAGAR KUKATPALLY HYDERSBSD Telangana
PIN1 : 500072
Phone No. : 23070225
GSTIN : 36AACCD5797J1Z5 		HYDD042O2C

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS ROD 8 5 MM LF 0711906011 Description : BRASS ROD 8 5 MM LF 0711906011() Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION R Nonestab
Category : s
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ALU SHEET 2400X1200X3MM IS737 24345 LF 0615420003 Description : ALU SHEET 2400X1200X3MM IS737 24345 LF 0615420003() Specification : ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN R Nonestab
Category : s
Grade : 3
Size : S
1Ordnance Factory Medak

Name Specification Use Status
1) ALUMINIUM BRONZE ROUND BAR DIA. 52 MM X LENGTH 100MM MIN. AB1 TO IS:305-81[64]() Specification : ALUMINIUM BRONZE ROUND BAR DIA. 52 MM X LENGTH 100MM MIN. AB1 TO IS:305-81 R Estab
Category :
Grade : Grade III
Size : S
3824 Impex Chemical Corporation
7 Devkaran Mansion, 1st Floor, 24 Vithaldas Road, Princess Street, PO Box No. 2399, Mumbai 400002 Princess Street Mumbai Maharashtra
PIN1 : 400002
Phone No. : 22014864 		AAAFI0493H

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ARMOR BLACK COLOUR WITH CATALYST MAKE CERAKOTE SHADE CODE H 190Q Description : ARMOR BLACK COLOUR WITH CATALYST MAKE CERAKOTE SHADE CODE H 190Q() Specification : ARMOR BLACK COLOUR WITH CATALYST MAKE:CERAKOTE SHADE CODE:H-190Q. R Estab
Category : ddp
Grade : 3
Size : S
1Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) POTASSIUM SULPHATE GR I Description : POTASSIUM SULPHATE GR I() Specification : POTASSIUM SULPHATE GRADE 1 RETAINED ON 150 MICRO METER IS SIEVE : NIL. JSS SPECN NO. 6810-110:2016 (REV.No.4) DC : 6046-ME DT.08-06-2017. R Estab
2) DI N BUTYL PHTHALATE DBP Description : DI N BUTYL PHTHALATE DBP() Specification : PLASTICIZER ESTERS TYPE-I-DI-N-BUTYL PHTHALATE- TO SPECN:IS14421-1997 (SUPERSEDES IS:3371-1980). REAFFIRMED 2013 R Estab
Category : s
Grade : 3
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BORAX TECH GR SP-IS 1109 1980() Specification : IS 1109-1980 (SECOND REVISION) REAFFIRMED 2003 R Estab
2) HOT MELT ADHESIVE FOR CARTG S.A.A() Specification : SPECN. NO.L-2/SPECN/HOTMELT ADHESIVE R Estab
Category : s
Grade : 3
Size : S
1Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) Ethyl Cellulose Description : Ethyl Cellulose() Specification : OFI/0002/SPN/A Dtd. 30.06.1999(Rev. 1) R Estab
2) PLASTICIZER ESTER TYPE-I (DBP) Description : PLASTICIZER ESTER TYPE-I (DBP)() Specification : AS PER O.F.I. REQUIREMENT R Estab
3) TOLUENE DI ISOCYANATEAS Description : TOLUENE DI ISOCYANATEAS() Specification : TOLUENE DI-ISOCYANATEAS PER SPEC ERDL/TRIM/PROP/RM/6(PROVISIONAL) DOC.NO.HEMRL/SRP/PIN/MQAP/6 COPY NO-2 REV. NO.-6 DATED 20/05/2015MAKE -(1) M/S E.MERCK, MUMBAI (2) M/S ARC ORGANICS.(3)M/S BAYER PHARMACEUTICALS PVT LTD, THANE. R Estab
4) Ferric Acetyl Acetonate Description : Ferric Acetyl Acetonate() Specification : ERDL/ TRIM/ PROP/RAM/09 Doc no. HEMRL/SRP/PIN/ MQAP/06 Rev no.6copy No.2 dt. 20/05/2015 R Estab
5) SODIUM NITRATE Description : SODIUM NITRATE() Specification : SODIUM NITRATE SPECN.IS 12681:1989 REAFFIRMED : 2016 R Estab
6) POTASSIUM SULPHATE GRADE 1 Description : POTASSIUM SULPHATE GRADE 1() Specification : SIZE 150 MICROMETER TO SPECIFICATION JSS6810-110-2003 REVISION NO .2 DC 3786- ME DT25/09/03 R Estab
7) DITRTLARY BUTYLS HYDROQUINONE Description : DITRTLARY BUTYLS HYDROQUINONE() Specification : CHARECTER 1 THE MATERIAL SHALL BE PRACTICAL GRADE AND HAVING CHEMICAL FORMULA OF 2.5 DITERTIARY BUTYLHYDROQUINONE. (2) THE MATERIAL SHALL BE CRYSTALINE SOLID, WHIT OR LIGHT TAN IN COLOUR .(3) MELTING POING 215+5 DEGREE CENTIGRADE (AX . R Estab
8) PYRO GALLOLAS Description : PYRO GALLOLAS() Specification : PYRO GALLOLAS PER HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/10 DOC.NO-HEMRL/SRP/PIN/MQAP/6REV.NO.6 COPY NO.2 DATED 20/05/2015. R Estab
9) MELAMINE MIN Description : MELAMINE MIN() Specification : MELAMINE MIN. 99.8% PURE R Estab
10) SODIUM HYDROXIDE PELLETS Description : SODIUM HYDROXIDE PELLETS() Specification : AR/GR M MMERCK/SARABHAI /BDH R Estab
11) LECITHIN Description : LECITHIN() Specification : TO HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/8. HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO. 3 DATED 07.09.2012 AND AMENDMENT AS PER HEMRL LETTER NO. HEMRL/SRP/PIN/PROD/NS/54 DT. 26.09.2013 R Estab
12) 1 2 6 HEXANE TRIOL Description : 1 2 6 HEXANE TRIOL() Specification : AS PER SPECN NO.ARDE/SPECN/PINAKA/RKT-08. ISSUE NO.2.0 REV. NO.0 PAGE NO.34APPENDIX - A-7. R Estab
13) NAPTHALENE GRADE I Description : NAPTHALENE GRADE I() Specification : NAPTHALENE GRADE I PURESPECN. NO IS:539-1974. 2ND REV REAFFIRMED 2011NAPTHALENE SHOULD BE IN BALL FORM R Estab
14) Iso Propyl Alcohol Description : Iso Propyl Alcohol() Specification : IS: 2631-1976REV.NO.1 REAFFIRMED 2015. WITH FOLLOWING AMENDMENT.(A) RESIDUE ON EVAPORATION 0.0025 GM./PER 100 ML. MAX.INSTEAD OF 0.OO4 GM./100 ML. MAX.(B)WATER CONTENT 0.1 % MAX. INSTEAD OF 0.5 % MAX. R Estab
15) Di Phenyl Amine Description : Di Phenyl Amine() Specification : SPCN. JSS-6810-129:2015 AND REVISION NO.3,DC NO.5395-ME DT.01.02.2016(1)PRIMARY AMINES O.10% INSTEAD OF 0.20% MAX.(2)SETTING POINT BETWEEN 51.7 DEGREE CELCIUS TO 53 DEGREE CELCIUS INSTEAD OF 51.5 DEGREE CELCIUS TO 53 DEGREE CELCIUS.(3)MOI R Estab
16) CALCIUM CARBONATE Description : CALCIUM CARBONATE() Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED . R Estab
17) ETHYLENE GLYCOL Description : ETHYLENE GLYCOL() Specification : SPECN IS: 5295/1985 R Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) Ethyl Cellulose Description : Ethyl Cellulose() Specification : OFI/0002/SPN/A Dtd. 30.06.1999(Rev. 1) R Estab
2) PLASTICIZER ESTER TYPE-I (DBP) Description : PLASTICIZER ESTER TYPE-I (DBP)() Specification : AS PER O.F.I. REQUIREMENT R Estab
3) TOLUENE DI ISOCYANATEAS Description : TOLUENE DI ISOCYANATEAS() Specification : TOLUENE DI-ISOCYANATEAS PER SPEC ERDL/TRIM/PROP/RM/6(PROVISIONAL) DOC.NO.HEMRL/SRP/PIN/MQAP/6 COPY NO-2 REV. NO.-6 DATED 20/05/2015MAKE -(1) M/S E.MERCK, MUMBAI (2) M/S ARC ORGANICS.(3)M/S BAYER PHARMACEUTICALS PVT LTD, THANE. R Estab
4) Ferric Acetyl Acetonate Description : Ferric Acetyl Acetonate() Specification : ERDL/ TRIM/ PROP/RAM/09 Doc no. HEMRL/SRP/PIN/ MQAP/06 Rev no.6copy No.2 dt. 20/05/2015 R Estab
5) SODIUM NITRATE Description : SODIUM NITRATE() Specification : SODIUM NITRATE SPECN.IS 12681:1989 REAFFIRMED : 2016 R Estab
6) POTASSIUM SULPHATE GRADE 1 Description : POTASSIUM SULPHATE GRADE 1() Specification : SIZE 150 MICROMETER TO SPECIFICATION JSS6810-110-2003 REVISION NO .2 DC 3786- ME DT25/09/03 R Estab
7) DITRTLARY BUTYLS HYDROQUINONE Description : DITRTLARY BUTYLS HYDROQUINONE() Specification : CHARECTER 1 THE MATERIAL SHALL BE PRACTICAL GRADE AND HAVING CHEMICAL FORMULA OF 2.5 DITERTIARY BUTYLHYDROQUINONE. (2) THE MATERIAL SHALL BE CRYSTALINE SOLID, WHIT OR LIGHT TAN IN COLOUR .(3) MELTING POING 215+5 DEGREE CENTIGRADE (AX . R Estab
8) PYRO GALLOLAS Description : PYRO GALLOLAS() Specification : PYRO GALLOLAS PER HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/10 DOC.NO-HEMRL/SRP/PIN/MQAP/6REV.NO.6 COPY NO.2 DATED 20/05/2015. R Estab
9) MELAMINE MIN Description : MELAMINE MIN() Specification : MELAMINE MIN. 99.8% PURE R Estab
10) SODIUM HYDROXIDE PELLETS Description : SODIUM HYDROXIDE PELLETS() Specification : AR/GR M MMERCK/SARABHAI /BDH R Estab
11) LECITHIN Description : LECITHIN() Specification : TO HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/8. HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO. 3 DATED 07.09.2012 AND AMENDMENT AS PER HEMRL LETTER NO. HEMRL/SRP/PIN/PROD/NS/54 DT. 26.09.2013 R Estab
12) 1 2 6 HEXANE TRIOL Description : 1 2 6 HEXANE TRIOL() Specification : AS PER SPECN NO.ARDE/SPECN/PINAKA/RKT-08. ISSUE NO.2.0 REV. NO.0 PAGE NO.34APPENDIX - A-7. R Estab
13) NAPTHALENE GRADE I Description : NAPTHALENE GRADE I() Specification : NAPTHALENE GRADE I PURESPECN. NO IS:539-1974. 2ND REV REAFFIRMED 2011NAPTHALENE SHOULD BE IN BALL FORM R Estab
14) Iso Propyl Alcohol Description : Iso Propyl Alcohol() Specification : IS: 2631-1976REV.NO.1 REAFFIRMED 2015. WITH FOLLOWING AMENDMENT.(A) RESIDUE ON EVAPORATION 0.0025 GM./PER 100 ML. MAX.INSTEAD OF 0.OO4 GM./100 ML. MAX.(B)WATER CONTENT 0.1 % MAX. INSTEAD OF 0.5 % MAX. R Estab
15) Di Phenyl Amine Description : Di Phenyl Amine() Specification : SPCN. JSS-6810-129:2015 AND REVISION NO.3,DC NO.5395-ME DT.01.02.2016(1)PRIMARY AMINES O.10% INSTEAD OF 0.20% MAX.(2)SETTING POINT BETWEEN 51.7 DEGREE CELCIUS TO 53 DEGREE CELCIUS INSTEAD OF 51.5 DEGREE CELCIUS TO 53 DEGREE CELCIUS.(3)MOI R Estab
16) CALCIUM CARBONATE Description : CALCIUM CARBONATE() Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED . R Estab
17) ETHYLENE GLYCOL Description : ETHYLENE GLYCOL() Specification : SPECN IS: 5295/1985 R Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) Ethyl Cellulose Description : Ethyl Cellulose() Specification : OFI/0002/SPN/A Dtd. 30.06.1999(Rev. 1) R Estab
2) PLASTICIZER ESTER TYPE-I (DBP) Description : PLASTICIZER ESTER TYPE-I (DBP)() Specification : AS PER O.F.I. REQUIREMENT R Estab
3) TOLUENE DI ISOCYANATEAS Description : TOLUENE DI ISOCYANATEAS() Specification : TOLUENE DI-ISOCYANATEAS PER SPEC ERDL/TRIM/PROP/RM/6(PROVISIONAL) DOC.NO.HEMRL/SRP/PIN/MQAP/6 COPY NO-2 REV. NO.-6 DATED 20/05/2015MAKE -(1) M/S E.MERCK, MUMBAI (2) M/S ARC ORGANICS.(3)M/S BAYER PHARMACEUTICALS PVT LTD, THANE. R Estab
4) Ferric Acetyl Acetonate Description : Ferric Acetyl Acetonate() Specification : ERDL/ TRIM/ PROP/RAM/09 Doc no. HEMRL/SRP/PIN/ MQAP/06 Rev no.6copy No.2 dt. 20/05/2015 R Estab
5) SODIUM NITRATE Description : SODIUM NITRATE() Specification : SODIUM NITRATE SPECN.IS 12681:1989 REAFFIRMED : 2016 R Estab
6) POTASSIUM SULPHATE GRADE 1 Description : POTASSIUM SULPHATE GRADE 1() Specification : SIZE 150 MICROMETER TO SPECIFICATION JSS6810-110-2003 REVISION NO .2 DC 3786- ME DT25/09/03 R Estab
7) DITRTLARY BUTYLS HYDROQUINONE Description : DITRTLARY BUTYLS HYDROQUINONE() Specification : CHARECTER 1 THE MATERIAL SHALL BE PRACTICAL GRADE AND HAVING CHEMICAL FORMULA OF 2.5 DITERTIARY BUTYLHYDROQUINONE. (2) THE MATERIAL SHALL BE CRYSTALINE SOLID, WHIT OR LIGHT TAN IN COLOUR .(3) MELTING POING 215+5 DEGREE CENTIGRADE (AX . R Estab
8) PYRO GALLOLAS Description : PYRO GALLOLAS() Specification : PYRO GALLOLAS PER HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/10 DOC.NO-HEMRL/SRP/PIN/MQAP/6REV.NO.6 COPY NO.2 DATED 20/05/2015. R Estab
9) MELAMINE MIN Description : MELAMINE MIN() Specification : MELAMINE MIN. 99.8% PURE R Estab
10) SODIUM HYDROXIDE PELLETS Description : SODIUM HYDROXIDE PELLETS() Specification : AR/GR M MMERCK/SARABHAI /BDH R Estab
11) LECITHIN Description : LECITHIN() Specification : TO HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/8. HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO. 3 DATED 07.09.2012 AND AMENDMENT AS PER HEMRL LETTER NO. HEMRL/SRP/PIN/PROD/NS/54 DT. 26.09.2013 R Estab
12) 1 2 6 HEXANE TRIOL Description : 1 2 6 HEXANE TRIOL() Specification : AS PER SPECN NO.ARDE/SPECN/PINAKA/RKT-08. ISSUE NO.2.0 REV. NO.0 PAGE NO.34APPENDIX - A-7. R Estab
13) NAPTHALENE GRADE I Description : NAPTHALENE GRADE I() Specification : NAPTHALENE GRADE I PURESPECN. NO IS:539-1974. 2ND REV REAFFIRMED 2011NAPTHALENE SHOULD BE IN BALL FORM R Estab
14) Iso Propyl Alcohol Description : Iso Propyl Alcohol() Specification : IS: 2631-1976REV.NO.1 REAFFIRMED 2015. WITH FOLLOWING AMENDMENT.(A) RESIDUE ON EVAPORATION 0.0025 GM./PER 100 ML. MAX.INSTEAD OF 0.OO4 GM./100 ML. MAX.(B)WATER CONTENT 0.1 % MAX. INSTEAD OF 0.5 % MAX. R Estab
15) Di Phenyl Amine Description : Di Phenyl Amine() Specification : SPCN. JSS-6810-129:2015 AND REVISION NO.3,DC NO.5395-ME DT.01.02.2016(1)PRIMARY AMINES O.10% INSTEAD OF 0.20% MAX.(2)SETTING POINT BETWEEN 51.7 DEGREE CELCIUS TO 53 DEGREE CELCIUS INSTEAD OF 51.5 DEGREE CELCIUS TO 53 DEGREE CELCIUS.(3)MOI R Estab
16) CALCIUM CARBONATE Description : CALCIUM CARBONATE() Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED . R Estab
17) ETHYLENE GLYCOL Description : ETHYLENE GLYCOL() Specification : SPECN IS: 5295/1985 R Estab
Category : ddp
Grade : 1
Size : S
3825 Tanishq Wire & Conductors Pvt. Ltd.
Shop No.10, 1st Floor, 502 C, Shiv Market Ashok Vihar, Delhi-110052 Ashok Vihar, Delhi Delhi
PIN1 : 110052
Phone No. : 47050446 		AAACT9417F

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) TAPE ADHESIVE W P FABRIC 50MM WIDE LF 2101773048 Description : TAPE ADHESIVE W P FABRIC 50MM WIDE LF 2101773048() Specification : TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14. E Nonestab
Category : s
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS ROD 11MM BS2874 CZ122 M LF 0712203011 Description : BRASS ROD 11MM BS2874 CZ122 M LF 0712203011() Specification : BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M. R Nonestab
Category : s
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 22X1point02 MM LF 0710664345 Description : BRASS STRIP 22X1point02 MM LF 0710664345() Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90 R Nonestab
2) BRASS STRIP 14point5 X 0point69MM BS2870CZ106 LF 0710664184 Description : BRASS STRIP 14point5 X 0point69MM BS2870CZ106 LF 0710664184() Specification : BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO R Nonestab
Category : s
Grade : 3
Size : S
1Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) HYLAM INDUSTRIAL LAMINATED SHEET Description : HYLAM INDUSTRIAL LAMINATED SHEET() Specification : SPECN. IS:2036-1995 (REAFF 2010) GRADE P1 C Estab
Category : p
Grade : 2
Size : S
1Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) ARALDITE CIBA 180 G Description : ARALDITE CIBA 180 G() Specification : ARALDITE CIBA 180 G P Estab
Category : p
Grade : 2
Size : S
1Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) PAPER KRAFT AMMUNITION Description : PAPER KRAFT AMMUNITION() Specification : PAPER KRAFT AMMUNITION TO SPECN. NO. JSS 8135-017:2016 (REV-I) SIZE 483X635 MM, SUSTENANCE, GRAM PER SQUARE METER 125+_ 5 DS CAT NO. 8135-000349. P Estab
Category : p
Grade : 2
Size : S
1Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) Tape adhesive water Proof Fabric 12.7mm wide Description : Tape adhesive water Proof Fabric 12.7mm wide() Specification : IND/ME/790(a) P Estab
Category : p
Grade : 2
Size : S
1Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) PIPE GR ST B20 22MM OD X 2MM THK TO 0111555257 Description : PIPE GR ST B20 22MM OD X 2MM THK TO 0111555257() Specification : GOST:8733(22X2) R Estab
2) WIRE STAINLESS SOFT 1 2 MM TO 0326011012 Description : WIRE STAINLESS SOFT 1 2 MM TO 0326011012() Specification : AISI:304(1.2)SOFT R Estab
Category : p
Grade : 2
Size : S
1Ordnance Factory Ambernath

[ENR Registration]
Name Specification Use Status
1) VCI POLYTHENE BAGS FOR 30 MM SARATH Description : VCI POLYTHENE BAGS FOR 30 MM SARATH() Specification : AS PER SPECIFICATION / DRAWING REQUIREMENT MENTIONED IN OUR OTE PUBLISHED FOR THE ITEM IN OUR E-PROC SITE. E Estab
2) VCI POLYTHENE BAG FOR 20 MM AMR Description : VCI POLYTHENE BAG FOR 20 MM AMR() Specification : AS PER THE SPECIFICATION MENTIONED IN THE OTE PUBLISHED FOR THE ITEM VIDE TENDER REFERENCE NO.111MMETT18001239. E Estab
Category : s
Grade : 3
Size : S
1Ordnance Factory Ambernath

[ENR Registration]
Name Specification Use Status
1) POLYTHENE PROTECTIVE BAG FOR 30 MM CC VCI Description : POLYTHENE PROTECTIVE BAG FOR 30 MM CC VCI() Specification : VAPOUR CORROSION INHIBITOR (VCI) LOW DENSITY POLYTHENE BAGS, SIZE 250 MM, LENGTH X 75 MM WIDTH X 0.1 MM (+/- 10%) THICKNESS FOR 30 MM SARATH CARTG.CASES AS PER JSS 9330-03-2014 REV.NO.03 E Estab
2) POLYTHENE PROTECTIVE BAG FOR 20 MM AMR CC Description : POLYTHENE PROTECTIVE BAG FOR 20 MM AMR CC() Specification : VAPOUR CORROSION INHIBITOR (VCI) LOW DENSITY POLYTHENE BAG FOR 20 AMR CC. E Estab
Category : s
Grade : 3
Size : S
3826 TOTAL PRECISION
MTC/D-22 PANKI INDUSTRIAL AREA SITE-3 PANKI KANPUR Panki Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 2690072 		AAHFT2489B

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) GUIDE UPPER RIGHT IN WITHOUT HEAT TREATMENT CONDITION FOR MAG Description : GUIDE UPPER RIGHT IN WITHOUT HEAT TREATMENT CONDITION FOR MAG() Specification : GUIDE UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 27011-SA DT- 14.01.2017.IN WITHOUT HEAT TREATMENT CONDITION. C Estab
Category : ddp
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK III DRG NO PHMK III 1 2 THROUGH MIM ROUTE Description : PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK III DRG NO PHMK III 1 2 THROUGH MIM ROUTE() Specification : PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-2, D.A. NO. 05/18 DT.07.03.2018. THROUGH MIM ROUTE. C Estab
2) NUT RETAINING HANDLE for MAG Description : NUT RETAINING HANDLE for MAG() Specification : NUT RETAINING HANDLE DS CAT NO. 5310 - 002660 DC(I) NO. 25349-SA DT. 30-04-02 C Estab
3) BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM Description : BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM() Specification : AS PER DRG. C Estab
4) GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./ Description : GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./() Specification : GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./ C Estab
Category : p
Grade : 3
Size : S
1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302 Description : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302() Specification : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302(IN FINISH C SPECN BS 970 PT.1:1983 GRADE 080 M40 C Estab
2) PACKING BOXES Description : PACKING BOXES() Specification : PACKING PLATE E Estab
3) SCREW FIXING LEVER CAM Description : SCREW FIXING LEVER CAM() Specification : FGK DRG. NO. PH -1-20 C Estab
4) SCREW CAM Description : SCREW CAM() Specification : FGK DRG. NO. PH-1/28 C Estab
5) PAWL Description : PAWL() Specification : DRG NO 32-0102 C Estab
6) ADOPTER 161 Description : ADOPTER 161() Specification : ADOPTER AS PER DRG.NO.161-1500 FOR SHARANG ORD C Estab
7) KEY AS PER DRG 161 480 Description : KEY AS PER DRG 161 480() Specification : KEY AS PER DRG.NO.161-480 FOR SHARANG ORD C Estab
8) PLUNGER Description : PLUNGER() Specification : FGK DRG. NO.161-495 C Estab
9) FIXING PIN FOR SHARANG ORD Description : FIXING PIN FOR SHARANG ORD() Specification : FIXING PIN AS PER DRG.NO.176-1212 FOR SHARANG ORD C Estab
10) FINISH COMPONENT OF KEY 176 1104 FOR SHARANG Description : FINISH COMPONENT OF KEY 176 1104 FOR SHARANG() Specification : FINISH COMPONENT OF KEY 176 1104 FOR SHARANG FOR SHARANG ORD C Estab
11) LOCKING PLATE 1481M X Description : LOCKING PLATE 1481M X() Specification : LOCKING PLATE AS PER DRG NO-161-697 C Estab
12) STRIP TO FGK DRG. NO. T-90/SK/0009 FOR STORE DRG. NO. 2A46M.02-148 Description : STRIP TO FGK DRG. NO. T-90/SK/0009 FOR STORE DRG. NO. 2A46M.02-148() Specification : STRIP TO FGK DRG. NO.161-697 C Estab
13) COVER CATCH Description : COVER CATCH() Specification : CATCH HOUSING AS PER DRG. NO. 166-256 C Estab
14) SCREW Description : SCREW() Specification : LOCKING SCREW AS PER DRG NO. 161-697 C Estab
15) CAP FOR SHARANG 161 473 Description : CAP FOR SHARANG 161 473() Specification : CAP AS PER DRG NO-161-473 FOR SHARANG ORDNANCE C Estab
Category : s
Grade : 3
Size : S
3827 VXL TECHNOLOGIES LIMITED
20/3, MATHURA ROAD FARIDABAD HARYANA
PIN1 : 121006
Phone No. : 07612743368 		121006V998

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) KRANS RACE MODIFIED F1301 046511 A LF 6170444400 Description : KRANS RACE MODIFIED F1301 046511 A LF 6170444400() Specification : KRANS RACE TO DRG NO. F-1301-044511-A DC NO-36534-A DATE 06/03/99 TO SPECN:- F-1301-902570-B DT 8/1/90. R Estab
2) SPIRAL DRG NO. 8.367.009 (9911350871) Description : SPIRAL DRG NO. 8.367.009 (9911350871)() Specification : SPIRAL TO DRG.NO.---8.367.009 (2 SHEETS) SHEET NO.1 DC-37271-A DT. 08/11/10,SHEET NO.2 DC-35030-A DT 22-02-91. C Estab
3) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073) Description : TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)() Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED. C Estab
4) SHUTTER 027 FOR MULTIMODE GRD LF 9911357611 Description : SHUTTER 027 FOR MULTIMODE GRD LF 9911357611() Specification : AS PER SPECIFIED DRG. R Estab
5) TOP PLATE 028 FOR MULTIMODE GRD LF 9911357612 Description : TOP PLATE 028 FOR MULTIMODE GRD LF 9911357612() Specification : AS PER SPECIFIED DRG. R Estab
6) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846) Description : MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)() Specification : MANTLE TO DRG.NO.TRD-2-2-2271. C Estab
7) SPACER TO DRG.NO.TRD-2-2-2273. (9911357855) Description : SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)() Specification : SPACER TO DRG.NO.TRD-2-2-2273. C Estab
8) SPIRAL NAI LF 9911358044 Description : SPIRAL NAI LF 9911358044() Specification : SPIRAL NAI(J) 501/6/3 (PROV) 2 SHEETS. R Estab
Category : p
Grade : 3
Size : S
3828 SUPER FORGINGS & STEELS LTD
P.B.NO-111,35-B/3 INDL ESTATE AMBATTUR CHENNAI TAMILNADU
PIN1 : 600058
Phone No. : 07612743368 		600058S665

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021) Description : STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021)() Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS. R Estab
2) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041) Description : STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)() Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK R Estab
3) STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021) Description : STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)() Specification : STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st R Estab
4) STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145) Description : STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)() Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2004)1st REV)GRADE 14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2003)1s R Estab
5) STEEL ROD 18MM BS970 080M50 CD ANL (0133001165) Description : STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)() Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R R Estab
6) MS ROD 64MM IS-1570 GR.25C4 (0133005064) Description : MS ROD 64MM IS-1570 GR.25C4 (0133005064)() Specification : MS ROD 64MM IS-1570 GR.25C4 R Estab
7) STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018) Description : STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018)() Specification : STEEL ROD 18+0.05/-0.10MM DIA,TO SPECN.SS/D32 TO JSS-9510-01IN NORMALISED CONDITION OR BS-970-PT-1-1983 GRADE O8OM5O INNORMALISED CONDITION,IN ST.LENGTH OF3+/-0.1MTR,HARDNESS 187HB TO 207 HB.MATERIAL TO BE SUPPLIED WITH COLOUR CODE BASECO R Estab
8) STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029) Description : STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029)() Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A R Estab
9) STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029) Description : STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029)() Specification : STEEL ROD 29[+0.075/-0.13] MM DIA IN ST.LENGTH OF 2.5 TO 3.0MTR TO SPECN:IS-1570( PT-III)-1979 (FIRST REVISION)(REAFFIRMED 2004) GR.40C10S18. R Estab
10) STEEL ROD 32MM 50-TY-14-1-2884-80 (0187100032) Description : STEEL ROD 32MM 50-TY-14-1-2884-80 (0187100032)() Specification : STEEL ROD 32(+0.00/-0.10)MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTR.TO SPECN: STEEL GRADE 50 TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES AS PER SPECN NO. ML 002 SHT. 1 OF 1 REVISION NO. 2 DATED 10-5-96 R Estab
11) STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029) Description : STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029)() Specification : COLD DRAWN STEEL ROD 29MM+0.07/-0.13 DIA IN STREIGTH LENGTHOF 2 TO 2.5 MTRS TO SPECN.BS-970-817 M40 (EN24) ORIS-5517-1998 (REV.1) 40 Ni 6 Cr4 Mo3 . R Estab
Category : p
Grade : 3
Size : S
3829 GISCO PAINTS
24, INDUSTRIAL ESTATE, ADHARTAL JABALPUR MADHYA PRADESH
PIN1 : 482004
Phone No. : 07612743368 		482004G145

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ROSIN GR.1 AMM. TO SPECN:- JSS-6810-62:2009 REVISION NO. 3(1001671027) Description : ROSIN GR.1 AMM. TO SPECN:- JSS-6810-62:2009 REVISION NO. 3(1001671027)() Specification : ROSIN GR.1 AMM. TO SPECN:- JSS-6810-62:2009 REVISION NO. 3 REAFFIRMED 2015 DC NO. 5364- ME DT. 28/07/2015. R Estab
2) PAINT ALUMINIUM BRUSING IS 2399 63 ITEM CODE 1011300099 Description : PAINT ALUMINIUM BRUSING IS 2399 63 ITEM CODE 1011300099() Specification : ALUMINIUM PAINT FOR GENERAL PURPOSE IN DUAL CONTAINERS TYPE BRUSHING TO SPECN IS 2339 1963 R Estab
3) PAINT DEEP BRONZE GREEN ISC 224 ITEM CODE 1011507000 Description : PAINT DEEP BRONZE GREEN ISC 224 ITEM CODE 1011507000() Specification : PAINT DEEP BRONZE GREEN ISC 224 R Estab
4) PAINT BLACK BRUSHING LF 1011507001 Description : PAINT BLACK BRUSHING LF 1011507001() Specification : PAINT READY MIXED AIR-DRYING BRUSHING MAT FINISH,DULL BLACK TO SPECN:- IS-168-1993(REAFFIRMED 2002)(3RDREV)DCNO3685-MEDT 19-03-01 AS APPLICABLE FOR DEFENCE USE. R Estab
5) PAINT TURQUOISEBLUE ISC102 IS168 SG LF 1011507102 Description : PAINT TURQUOISEBLUE ISC102 IS168 SG LF 1011507102() Specification : PAINT READY MIXED AMMN. AIR DRYING BRUSHING SEMI-GLOSSY FOR GENERAL PURPOSE TURQUIOISE BLUE ISC NO.-102 OF IS-5-2007(6TH REV) TO SPECN 1S-168-1993(REAFFIRMED 2002)(3RD REV) DC NO. DC NO.3685-ME DT 19/3/01 AS APPLICABLE FOR DEFENCE USE. R Estab
6) PAINT BUFF MIDDLE GP BRUS IS 168 SG ITEM CODE 1011507359 Description : PAINT BUFF MIDDLE GP BRUS IS 168 SG ITEM CODE 1011507359() Specification : PAINT BUFF MIDDLE GP BRUS IS 168 SG R Estab
7) PAINT RED SIGNAL ISC537 IS168 SG LF 1011507537 Description : PAINT RED SIGNAL ISC537 IS168 SG LF 1011507537() Specification : PAINT READY MIXED AIR DRYING SEMI GLOSSY FINISH FOR GENERAL PURPOSE BRUSHING SIGNAL RED ISC NO.537 OF IS-5-2007(6th Rev) TO SPECN:-IS-168-1993 REAFF.2002 DC NO. 3685-MEDT. 19-03-01. (3rd REV.) (AS APP LICABLE FOR DEFENCE USE ) R Estab
8) PAINT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE BRUSHING LIGHT BRUNSWICK GREEN ISC 225 IS 168 MF ITEM CODE 1011508225 Description : PAINT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE BRUSHING LIGHT BRUNSWICK GREEN ISC 225 IS 168 MF ITEM CODE 1011508225() Specification : PAINT L BRUNS GREEN ISC 225 IS 168 MF R Estab
9) PAINT PRIMER RED OXIDE LF 1011508446 Description : PAINT PRIMER RED OXIDE LF 1011508446() Specification : PAINT READY MIXED PRIMING, RED OXIDE. AMMUNITION, AIR DRYINGMATT FINISH, BRUSHING TO SPECN NO. JSS-8010-68:1994:REVISIONNI.1 DC NO. 3470-ME DT. 14-1-98, R Estab
10) paint ready mixed air drying matt finish for general purpose olive green item code 1011509314 Description : paint ready mixed air drying matt finish for general purpose olive green item code 1011509314() Specification : ISC-220 OF IS-5-2007 (6TH REV) TO SPECN IS-168-1993 (THIRD REV) (REAFFIRMED 2002) DC NO. 36851030- ME DT19-03-2001 AS APPLICABLE FOR DEFENCE USE) R Estab
11) PAINT BLACK STENCIL MAT FIN IS138 LF 1011538001 Description : PAINT BLACK STENCIL MAT FIN IS138 LF 1011538001() Specification : PAINT READY MIXED AIR-DRYING MARKING SMOOTH & MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING/STENCILING BLACKTO SPECN:IS-138-1992(3RD REVISION) REAFFIRMED 2009 WITH AMENDMENT NO.1 APRIL 2000 .AS APPLICABLE FOR DEFENCE USE. R Estab
12) READY MIXED PAINT MARKING SMOOTH AND MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING STENCILING TO SPECN IS 138 1992 ITEM CODE 1011538002 Description : READY MIXED PAINT MARKING SMOOTH AND MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING STENCILING TO SPECN IS 138 1992 ITEM CODE 1011538002() Specification : READY MIXED PAINT MARKING SMOOTH AND MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING STENCILING TO SPECN IS 138 1992 (3RD REV) (REAFF. 2014) WITH AMENDMENT NO.1 APRIL 2000, AS APPLICABLE FOR DEFENCE USE. R Estab
13) PAINT GOLDEN YELLOW MATT FIN IS 138 ITEM CODE 1011538355 Description : PAINT GOLDEN YELLOW MATT FIN IS 138 ITEM CODE 1011538355() Specification : PAINT GOLDEN YELLOW MATT FIN IS 138 R Estab
14) paint red signal ISC 357 IS 138 SG ITEM CODE 1011538537 Description : paint red signal ISC 357 IS 138 SG ITEM CODE 1011538537() Specification : paint red signal ISC 357 IS 138 SG R Estab
Category : p
Grade : 3
Size : S
3830 GEEMAXTECHNOLOGIES
1/237,THACHAN THOTTAM,KATTAMPATTI VILLAGE SARCARSAMAKULAM,ANNUR COIMBATORE Tamil Nadu
PIN1 : 641107
Phone No. : 9043832893
GSTIN : 33AAIFG7514K1ZB 		CMBG06044D

Download 		1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) C5087 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
Category :
Grade : Grade III
Size : S
3831 Rajesh Auto Industries
10/6 Vijay Nagar Kanpur Uttar Pradesh
PIN1 : 208005
Phone No. : 9839035224 		AAWPT0796Q

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER Description : SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER() Specification : SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03 C Estab
Category : p
Grade : 3
Size : S
1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) ARM (155mm FH Gun) Description : ARM (155mm FH Gun)() Specification : AS PER DRG. NO. 6358150 C Estab
2) BEARING SLEEVE DS CAT FOR MK II SPARE Description : BEARING SLEEVE DS CAT FOR MK II SPARE() Specification : BEARING SLEEVE D.S CAT NO.3120-004588(ILG-167) FOR MK-II SPARE C Estab
3) BOLTS Description : BOLTS() Specification : STOP BOLT C Estab
4) MACHINE COMPONENTS Description : MACHINE COMPONENTS() Specification : DAMPER C Estab
5) BUSH Description : BUSH() Specification : BUSH THREADED AS PER DRG. C Estab
6) BUSHING Description : BUSHING() Specification : AS PER D.S. CAT. NO. 1015-000197 C Estab
7) BUSHING SLEEVE ILG 165 Description : BUSHING SLEEVE ILG 165() Specification : BUSHING SLEEVE TO DRG.NO.3120-002319(ILG-165) C Estab
8) BUSHING SLEEVE FOR MK II Description : BUSHING SLEEVE FOR MK II() Specification : BUSHING SLEEVE TO DRG NO 3120-002320 FOR MK-II SPARE C Estab
9) CAP FOR CONTACT ELECTRICAL AS PER DRG Description : CAP FOR CONTACT ELECTRICAL AS PER DRG() Specification : CAP FOR CONTACT ELECTRICAL AS PER DRG NO.1015-003201 C Estab
10) NUT, BOLTS, WASHERS Description : NUT, BOLTS, WASHERS() Specification : AS PER FGK REQUIREMENT C Estab
11) PIN Description : PIN() Specification : SPLIT PIN 1.6X16.0MMOF LOW CARBON C Estab
12) LFG ORDNANCE COMPONENTS AS PER ANNEXURE "G" Description : LFG ORDNANCE COMPONENTS AS PER ANNEXURE "G"() Specification : LFG ORDNANCE COMPONENTS AS PER ANNEXURE "G" C Estab
13) SCREW Description : SCREW() Specification : AS PER DRG.NO. 5305-003128 C Estab
14) HIGH TENSILE FASTENERS Description : HIGH TENSILE FASTENERS() Specification : FASTENERS FOR DIFFERENT SIZE C Estab
15) FINISH MACHINING OF VARIOUS MECH. COMPONENTS Description : FINISH MACHINING OF VARIOUS MECH. COMPONENTS() Specification : FINISH MACHINING OF SLEEVE 2A26-02-170 C Estab
16) MACHINING Description : MACHINING() Specification : FINISH MACHINING OF SCREW 2A20-02-37 C Estab
17) FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32. Description : FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32.() Specification : FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32. C Estab
18) GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III Description : GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III() Specification : AS PER DRG. NO. 32-0800 & 32-0900 C Estab
19) INSULATION SLEEVING Description : INSULATION SLEEVING() Specification : AS PER DRG.NO. 5970-002854 C Estab
20) INSULATOR ILG 155 Description : INSULATOR ILG 155() Specification : INSULATOR(HYLUM COMPONENT) ILG-155/DS CAT 5970-002105 C Estab
21) LEVER AIXILLARY Description : LEVER AIXILLARY() Specification : FGK DRG. NO. PH -1-8 C Estab
22) LINER Description : LINER() Specification : LINER DRG.NO.1015-000199/3120-004623 C Estab
23) LINER ILG 150 Description : LINER ILG 150() Specification : LINER DRG.NO.ILG-150 C Estab
24) LOCK DRG.NO.2A26-02-128 Description : LOCK DRG.NO.2A26-02-128() Specification : LOCK DRG.NO.2A26-02-128 P Estab
25) LOCKING PIECE FOR SHARANG ORD Description : LOCKING PIECE FOR SHARANG ORD() Specification : LOCKING PIECE AS PER DRG.NO.166-217 C Estab
26) LOCKING PLATE 1481M X Description : LOCKING PLATE 1481M X() Specification : LOCKING PLATE AS PER D.S. CAT. NO. 5310-022970 C Estab
27) SOLUBLE CUTTING OIL Description : SOLUBLE CUTTING OIL() Specification : AS PER SPECIFICATION E Estab
28) MAIN SPRING SWIVEL MK-III Description : MAIN SPRING SWIVEL MK-III() Specification : AS PER FGK DRG.NO. 32-0121 MK-III C Estab
29) MANUFACTURING OF COMPONENTS Description : MANUFACTURING OF COMPONENTS() Specification : SLIDE RING C Estab
30) GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III & NIRBHEEK Description : GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III & NIRBHEEK() Specification : AS PER SPECIFICATION/REQUIREMENT C Estab
31) NOZZLE AS PER DRG NO. 2A46-01-05. Description : NOZZLE AS PER DRG NO. 2A46-01-05.() Specification : NOZZLE AS PER DRG NO. 2A46-01-05. C Estab
32) All types of extruded Rubber profiles i.e. Beadings, Channels, Sections, Tubes etc Description : All types of extruded Rubber profiles i.e. Beadings, Channels, Sections, Tubes etc() Specification : HYLUM TUBE C Estab
33) AXIS CYLINDER Description : AXIS CYLINDER() Specification : PIN AXIS CYLINDER FGK DRG. NO. 32-0303 C Estab
34) PIN CATCH TRIGGER Description : PIN CATCH TRIGGER() Specification : FGK DRG. NO. PH-7-3 C Estab
35) PIN EXTRACTOR Description : PIN EXTRACTOR() Specification : FGK DRG. NO. PH-10-2 C Estab
36) PIN FIRING Description : PIN FIRING() Specification : AS PER FGK DRG. NO. C Estab
37) PIN FIXING BARREL Description : PIN FIXING BARREL() Specification : FGK DRG. NO. 32-0109 C Estab
38) BOTTOM PLATE Description : BOTTOM PLATE() Specification : AS PER DRG. & SPECIFICATION C Estab
39) THREAD PLUG Description : THREAD PLUG() Specification : AS PER DRG. & SPECIFICATION C Estab
40) REBOUND SLIDE Description : REBOUND SLIDE() Specification : AS PER DRG. & SPECIFICATION C Estab
41) SPRING RECOCK LEVER Description : SPRING RECOCK LEVER() Specification : AS PER DRG.NO. 2A-20-02-74 C Estab
42) RING Description : RING() Specification : FGK DRG. NO. T-90/SK/0025 C Estab
43) RIVET FLAT HEAD FOR COVER AND DOVETAIL Description : RIVET FLAT HEAD FOR COVER AND DOVETAIL() Specification : AS PER DRG.NO.SK-3543 A * C Estab
44) SCREW CAP SHOCKET HEAD Description : SCREW CAP SHOCKET HEAD() Specification : AS PER DS CAT NO. 5305-004289 C Estab
45) SCREW CATCH BARREL Description : SCREW CATCH BARREL() Specification : FGK DRG. NO. PH -1-13 C Estab
46) SCREW PIN FIXING BARREL Description : SCREW PIN FIXING BARREL() Specification : AS PER DRG. NO. SK-01472 C Estab
47) SCREW SHIELD Description : SCREW SHIELD() Specification : FGK DRG. NO. PH-1-16 C Estab
48) SCREW STOCK Description : SCREW STOCK() Specification : FGK DRG. NO. PH -1-15 C Estab
49) SEAT Description : SEAT() Specification : AS PER DRG.NO. 1015-000212 C Estab
50) SPRING Description : SPRING() Specification : FOR T-72 C Estab
51) SHEET HELICAL Description : SHEET HELICAL() Specification : AS PER DRG. & SPECIFICATION C Estab
52) SLEEVES Description : SLEEVES() Specification : AS PER DRG. NO. 1015-000260 C Estab
53) SLEEVE - I Description : SLEEVE - I() Specification : AS PER DRG.NO. 1015-003995 C Estab
54) SPACER Description : SPACER() Specification : SPACER RING 1015-000214 C Estab
55) SPACER STEPPED Description : SPACER STEPPED() Specification : AS PER DRG.NO.6358143 C Estab
56) COVER & PLATE Description : COVER & PLATE() Specification : SPACE PLATE C Estab
57) SPRING TO DRG NO 2A20-02-32 Description : SPRING TO DRG NO 2A20-02-32() Specification : SPRING TO DRG NO 2A20-02-32 C Estab
58) SPRING TO DRG NO 2A20-02-35. Description : SPRING TO DRG NO 2A20-02-35.() Specification : SPRING TO DRG NO 2A20-02-35. C Estab
59) SPRING TO DRG NO 2A26-02-169/SK-6145 Description : SPRING TO DRG NO 2A26-02-169/SK-6145() Specification : SPRING TO DRG NO 2A26-02-169/SK-6145 C Estab
60) SPRING AS PER DRG.NO.T-90/SK/0002. DRG.NO.2A46M-02-46 Description : SPRING AS PER DRG.NO.T-90/SK/0002. DRG.NO.2A46M-02-46() Specification : SPRING AS PER DRG.NO.T-90/SK/0002. DRG.NO.2A46M-02-46 C Estab
61) Spring Catch Barrel Description : Spring Catch Barrel() Specification : As per FGK Drg.32-0112 C Estab
62) SPRING CATCH HAMMER Description : SPRING CATCH HAMMER() Specification : AS PER DRG.NO. 32-0606 C Estab
63) SPRING CATCH TRIGGER Description : SPRING CATCH TRIGGER() Specification : AS PER DRG.NO. 32-0704 C Estab
64) SPRING ILG 126 Description : SPRING ILG 126() Specification : SPRING DRG NO.ILG-126/1 C Estab
65) SPRING EXTRACTOR Description : SPRING EXTRACTOR() Specification : AS PER DRG.NO. 32-0403 C Estab
66) SPRING FOR LFG ORDNANCE AS PER ANNEXURE "C" Description : SPRING FOR LFG ORDNANCE AS PER ANNEXURE "C"() Specification : SPRING FOR LFG ORDNANCE AS PER ANNEXURE "C" C Estab
67) SPRING HELICAL COMP. FOR EXTRACTOR (INNER) Description : SPRING HELICAL COMP. FOR EXTRACTOR (INNER)() Specification : AS PER DRG. & SPECIFICATION C Estab
68) SPRING HELICAL Description : SPRING HELICAL() Specification : AS PER DRG.NO.5360-007206 C Estab
69) SPRING HELICAL COMP. FOR PAWL HAMMER Description : SPRING HELICAL COMP. FOR PAWL HAMMER() Specification : AS PER DRG. & SPECIFICATION C Estab
70) SPRING ILG 127 Description : SPRING ILG 127() Specification : SPRING ILG 127 C Estab
71) SPRING ILG 176 OUTER Description : SPRING ILG 176 OUTER() Specification : AS PER DRG.NO.5360-003117 C Estab
72) SPRING LEVER EXTRACATOR Description : SPRING LEVER EXTRACATOR() Specification : AS PER DRG.NO. 32-0118 C Estab
73) SPRING MAIN TO DRG. NO.32-0106 Description : SPRING MAIN TO DRG. NO.32-0106() Specification : SPRING MAIN TO DRG. NO.32-0106 MATERIAL SPRING STEEL, Gr- 4, IS: 4454 (Pt-1)-81 C Estab
74) SPRING OF SEMI AUTO GEAR 2A26-02-108 Description : SPRING OF SEMI AUTO GEAR 2A26-02-108() Specification : SPRING OF SEMI AUTO GEAR 2A26-02-108 FOR T-72 ORDNANCE C Estab
75) SPRING PIN FIRING Description : SPRING PIN FIRING() Specification : AS PER DRG.NO. SK-01243 C Estab
76) SPRING PLUNGER Description : SPRING PLUNGER() Specification : AS PER DRG.NO. 32-0125 C Estab
77) SPRING PAWL Description : SPRING PAWL() Specification : AS PER DRG.NO. 32-0133 C Estab
78) SPRING REBOUND SLIDE Description : SPRING REBOUND SLIDE() Specification : AS PER DRG.NO. 32-0127 C Estab
79) SPRING STOP CYLINDER Description : SPRING STOP CYLINDER() Specification : AS PER DRG.NO. 32-0114 C Estab
80) SPRING TO FGK DRG. NO.T-90/SK/0001 (2A46M.02.64) Description : SPRING TO FGK DRG. NO.T-90/SK/0001 (2A46M.02.64)() Specification : SPRING TO FGK DRG. NO.T-90/SK/0001 (2A46M.02.64) REQUIRED FOR T-90 C Estab
81) SPRING TO FGK DRG. NO.T-90/SK/0003 (A-51230-86) Description : SPRING TO FGK DRG. NO.T-90/SK/0003 (A-51230-86)() Specification : SPRING TO FGK DRG. NO.T-90/SK/0003 (A-51230-86) REQUIRED FOR T-90 C Estab
82) SPRING TO FGK DRG. NO. T-90/SK/0005 (A-51230-70) Description : SPRING TO FGK DRG. NO. T-90/SK/0005 (A-51230-70)() Specification : SPRING TO FGK DRG. NO. T-90/SK/0005 (A-51230-70) REQUIRED FOR T-90 C Estab
83) SPRING TORSION Description : SPRING TORSION() Specification : AS PER DRG.NO. 5360-003119 C Estab
84) SPRING WASHER FOR ORDNANCE Description : SPRING WASHER FOR ORDNANCE() Specification : AS PER FGK DRG C Estab
85) WASHER/SPRING WASHER Description : WASHER/SPRING WASHER() Specification : AS PER DRG. NO.SP-00003/5310-001465 C Estab
86) BRASS STRIPS Description : BRASS STRIPS() Specification : AS PER SPECIFICATION NO. 63/37, 65/35, 40/30 C Estab
87) STUD TRIGGER Description : STUD TRIGGER() Specification : FGK DRG. NO. PH -2-3 C Estab
88) STUD HAMMER Description : STUD HAMMER() Specification : FGK DRG. NO. PH -2-4 C Estab
89) STUD STOP CYLINDER Description : STUD STOP CYLINDER() Specification : FGK DRG. NO. PH PH-2-2 C Estab
90) SWIVEL BUTT SUB ASSEMBLY Description : SWIVEL BUTT SUB ASSEMBLY() Specification : AS PER DRG. & SPECIFICATION C Estab
91) ORDNANCE AND REVOLVER COMPONENTS Description : ORDNANCE AND REVOLVER COMPONENTS() Specification : AS PER DRG. & SPECIFICATION C Estab
92) WASHER Description : WASHER() Specification : AS PER DRG.NO. 5360-001836 C Estab
93) WASHER SPRING Description : WASHER SPRING() Specification : AS PER DRG. NO.SP-00007,5310-001473 C Estab
Category : s
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Adopter for Cleaning of Bore by pull Through Description : Adopter for Cleaning of Bore by pull Through() Specification : ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010 C Estab
2) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
3) SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER Description : SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER() Specification : SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03 C Estab
Category : p
Grade : 3
Size : S
3832 Shiva Enterprises
C-102/A12, PHASE 7 Industrial area Mohali Punjab
PIN1 : 160055
Phone No. : 5093902
GSTIN : 03ABNFS3255MIZT 		PTLS22007G

Download 		1Heavy Vehicle Factory

Name Specification Use Status
1) ELECTRIC OIL PRIMING PUMP MZH-2 WITH ELECTRIC MOTOR MH1-2C ASSY (MODIFIED) / 175.66.021CB-BCB[18]() Specification : ELECTRIC OIL PRIMING PUMP MZH-2 WITH ELECTRIC MOTOR MH1-2C ASSY (MODIFIED) / 175.66.021CB-BCB C Nonestab
Category : p
Grade : Grade II
Size : S
3833 HINDUSTAN COPPER LIMITED.,
TAMRA BHAVAN, 1, ASHUTOSH CHOWDHURY AVENUE, KOLKATA WEST BENGAL
PIN1 : 700019
Phone No. : 033-22832021 		AAACH7409R

Download 		1Ordnance Factory Ambernath

[ENR Registration]
Name Specification Use Status
1) CATHODE COPPER IS 191 Description : CATHODE COPPER IS 191() Specification : IS:191:2007, GRADE/DESIGNATION :CU-CATH-2 SIZE:APPROX 200MM-280MM WIDTH X 250 MM-1000 MM LENGTH AND WEIGHT LESS THAN 30.00 KG OF EACH CUT PIECE. R Estab
Category : p
Grade : 1
Size : L
3834 TRANSLLOY INDIA PVT LTD.,
GALA NO.320, 3RD FLOOR, TANTIA JOGANI INDL.PREM. CHS LTD, SITARAM MILLS COMPOUND, J.R. BORICHA MARG, LOWER PAREL (EAST) MUMBAI MAHARASHTRA
PIN1 : 400011
Phone No. : 022- 23002295
GSTIN : 26AAACT9143L1Z0 		AAACT9143L

Download 		1Ordnance Factory Ambernath

[ENR Registration]
Name Specification Use Status
1) ALUMINIUM TITANIUM Description : ALUMINIUM TITANIUM() Specification : ALUMINIUM TITANIUM MASTER ALLOY WITH Ti 4.5 TO 5.5 % , Si-0.2% Max, Cu-Tr, Fe-0.5% Max, Mn-Tr, Mg-Tr, Zn-Tr, ALUMINIUM -REST R Estab
Category : p
Grade : 3
Size : S
3835 D N Enterprises
A6 20 South Side GT Road Ghaziabad UP South Side GT Road Ghaziabad Uttar Pradesh
PIN1 : 201001
Phone No. : 9810646595
GSTIN : 09AADFD6780F1ZB 		AADFD6780F

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) APC- 217 AS PER SPECIFICATION NO. JSS 8010-42:2009 IIIrd REV (PH VALUE 6 TO 7)[10]() Specification : APC- 217 AS PER SPECIFICATION NO. JSS 8010-42:2009 IIIrd REV (PH VALUE 6 TO 7) P Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) EPOXY RESIN W50-108-1[99]() Specification : EPOXY RESIN W50-108-1 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) ACETONE LF 1001010103[10]() Specification : IS 170-2004 (4TH REV.) R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) TOLUENE PURE NITRATION GRADE[10]() Specification : TOLUENE PURE NITRATION GRADE SPECN:-IS 537-1967 (1ST REV) DC NO. 3807-ME DTD.05/05/04 R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) TRICHLOROETHYLENE TECH TYPE2 IS-245 (1001773405)[10]() Specification : TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) APC NO 2 RD 1192 K JSS 8030 14 ITEM CODE 1003100803[10]() Specification : AMMUNITION PROTECTIVE COMPOSITION NO 2 (CEMENT RD- 1192 K AMMN) TO SPECN; JSS-8030-14:2015 (REVISION NO. 4) DC NO. 5397-ME DT 01/02/2016 R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION item code 1001015748[10]() Specification : BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION NO.GOST 5208-81 GRADE-PREMIUM MAKE: RANKEM/MERCK/THERMO FISHER SIZE:1 LITRE/ 1.5 LITRE/ 2 LITRE R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) TRICHLOROETHYLENE TECH TYPE2 IS-245 (1001773405)[10]() Specification : TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002. R Nonestab
2) SHELLAC GR. I JSS-8010-17 (1020710133)[10]() Specification : SHELLAC TO SPECN JSS 8010-17, 2005 (REV NO.1) DC NO.3879 ME. DT. 23/08/2006 R Nonestab
3) READY MIXED PAINT AIR DRYING GENERAL PURPOSE LF 1011515359[10]() Specification : IS: 168-1993 R Nonestab
4) WAX SHELLAC (1020871703)[10]() Specification : WAX SHELLAC AMMN TO SPECN:- IND/ME/164(b) DC NO 3510-ME DT 9-4-98. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) paint ready mixed air drying matt finish for general purpose olive green item code 1011509314[10]() Specification : ISC-220 OF IS-5-2007 (6TH REV) TO SPECN IS-168-1993 (THIRD REV) (REAFFIRMED 2002) DC NO. 36851030- ME DT19-03-2001 AS APPLICABLE FOR DEFENCE USE) R Nonestab
2) PANT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE LIGHT GREY item code 1011341632[10]() Specification : ISC NO. 631 OF IS-5-2007 (SIXTH REVISION) TO SPECN IS-168-1993 (THIRD REVISION) (REAFFIRMED 2002) DC NO. 3685-ME 984 DT 19-3-01 AS APPLICABLE FOR DEFENCE USE. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) PANT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE LIGHT GREY item code 1011341632[10]() Specification : ISC NO. 631 OF IS-5-2007 (SIXTH REVISION) TO SPECN IS-168-1993 (THIRD REVISION) (REAFFIRMED 2002) DC NO. 3685-ME 984 DT 19-3-01 AS APPLICABLE FOR DEFENCE USE. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) PAINT READY MIXED AIR DRYING BRUSHING MAT FINISH DEEP BRONZE GREEN ITEM CODE 1011508224[10]() Specification : PAINT READY MIXED AIR DRYING BRUSHING MAT-FINISH DEEP BRONZE GREEN ISC-224 OF IS-5-2007(6TH REV) (REAFFIRMED 2017) TOSPECN:IS-168-1993 REAAF.2012 (3RD REV) DC NO.3685-ME DT.19/03/2001.(NOTE:- ONLY BERGER/ASIAN/NEROLAC/SHALIMAR BRAND ONLY) R Nonestab
Category :
Grade : Grade III
Size : S
3836 PD FORGE PVT LTD
27-A HAZRA ROAD KOLKATA WEST BENGAL
PIN1 : 700029
Phone No. : 033-66451265 		CALPO4379E

Download 		1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) FORGING BODY FOR STABILIZER 125 HEAT Description : BODY FOR STABILIZER FOR 125MM HEAT IN F.C() Specification : AS PER DRAWING R Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) FORGING BODY FOR STABILIZER 125 HEAT Description : BODY FOR STABILIZER FOR 125MM HEAT IN F.C() Specification : AS PER DRAWING R Estab
Category : dp
Grade : 3
Size : S
3837 PATIL NURSERY
KHADAKA ROAD, OPPOSITE LAL BUILDING, PATIL NURSERY, BHUSAWAL MAHARASHTRA
PIN1 : 425201
Phone No. : 9422276033 		ACLPP8352P

Download 		1Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) ASSISTANCE OF LABOURS FOR PROD SECTION Description : ASSISTANCE OF LABOURS FOR PROD SECTION() Specification : ASSISTANCE OF LABOURS FOR PROD SECTION AS PER ANNEXURE R Estab
2) CATCH SPOTTING TO BOX C 53A Description : CATCH SPOTTING TO BOX C 53A() Specification : AS PER OFBH SPECIFICATION R Estab
3) PROCESSING ALONGWITH WELD TRA Description : PROCESSING ALONGWITH WELD TRA() Specification : PROCESSING ALONGWITH WELD. TRA R Estab
4) PROCESSING OF AMMN CONT BOX 43 Description : PROCESSING OF AMMN CONT BOX 43() Specification : PROCESSING OF AMMN.CONT.BOXC43 R Estab
5) FABRICATION SERVICES BOX C43A Description : FABRICATION SERVICES BOX C43A() Specification : FABRICATION SERVICES BOX C-43A R Estab
6) PROCESSING FOR AMMNCONTC44A Description : PROCESSING FOR AMMNCONTC44A() Specification : PROCESSING FOR AMMN.CONT.C-44A R Estab
7) PROCESSING FOR BOX SM 642 D Description : PROCESSING FOR BOX SM 642 D() Specification : PROCESSING FOR BOX SM-642-D R Estab
8) PROCESSING OF CYLINDER 12A Description : PROCESSING OF CYLINDER 12A() Specification : PROCESSING OF CYLINDER 12A R Estab
9) PROCESSING OF CARRIER 13A Description : PROCESSING OF CARRIER 13A() Specification : PROCESSING OF CARRIER 13A R Estab
10) PROCESSING OF PHOS PAINTING 53 Description : PROCESSING OF PHOS PAINTING 53() Specification : PROCESSING OF PHOS.PAINTING 53 R Estab
11) SERVICES FOR BOX H2A NEW Description : SERVICES FOR BOX H2A NEW() Specification : SERVICES FOR BOX H2A (NEW) R Estab
12) SOLDERING PAINTING SERVICES Description : SOLDERING PAINTING SERVICES() Specification : SOLDERING & PAINTING SERVICES R Estab
Category : p
Grade : 3
Size : S
3838 AIRTECH SOLUTIONS
Showroom No. A -12 Megacentre Hadapsar Pune Maharashtra
PIN1 : 411013
Phone No. : 9823187535 		AFHPJ1469E

Download 		1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) GROMET IN FC FOR BTU-450 Description : GROMET IN FC FOR BTU-450() Specification : DET NO.33 TO DRG.NO.ARDE-2121 C Estab
2) VANE SPINDLE FOR BTU-450 Description : VANE SPINDLE FOR BTU-450() Specification : DET-32, ARDE-2121 C Estab
3) ARMING WIRE ASSY FOR BTU-450 Description : ARMING WIRE ASSY FOR BTU-450() Specification : DET NO-44 ARDE-2121 C Estab
4) FIN ASSY, DET NO 56 ARDE 1947 Description : FIN ASSY, DET NO 56 ARDE 1947() Specification : AS PER DRAWING C Estab
5) ARMING SPINDLE FOR BTU 450 Description : ARMING SPINDLE FOR BTU 450() Specification : DET- 34, ARDE-2121 C Estab
6) AXLE FIN Description : AXLE FIN() Specification : AS PER DRAWING C Estab
7) AXLE PIN IN FC FOR 125MM HEAT Description : AXLE PIN IN FC FOR 125MM HEAT() Specification : DET.NO.025, C Estab
Category : dp
Grade : 3
Size : S
3839 MINERAL OIL CORPORATION
D-13 Panki Industrial Area Site-1 Panki Industrial Area Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 2691148
GSTIN : 09AABFM4017A1ZW 		KNPM01280G

Download 		1Ordnance Factory Kanpur

Name Specification Use Status
1) Oil Micronised Graphite Shell Forging[65]() Specification : Oil Micronised Graphite Shell Forging Lubricant as per IS: 14384:1996 (For Heavy Duty Application Under Clause No. 4.3 Table-2); Graphite Content:13 to 15% by Mass Graphite Particle Size: Upto 10 Microns: Minimum 98% Graphite Particle Siz P Nonestab
Category : p
Grade : Grade III
Size : S
3840 SALTS AND CHEMICALS PVT LTD
CENTRE POINT, 21 HEMANTA BASU SARANI, 3RD FLOOR, ROOM NO. 320, CENTRE POINT, 21 HEMANTA BASU SARANI, 3RD FLOOR, ROOM NO. 320, KOLKATA West Bengal
PIN1 : 700001
Phone No. : 22137490
GSTIN : 19AAICS6135M1ZS 		AAICS6135M

Download 		1Ordnance Factory Kanpur

Name Specification Use Status
1) Oil Micronised Graphite Shell Forging[65]() Specification : Oil Micronised Graphite Shell Forging Lubricant as per IS: 14384:1996 (For Heavy Duty Application Under Clause No. 4.3 Table-2); Graphite Content:13 to 15% by Mass Graphite Particle Size: Upto 10 Microns: Minimum 98% Graphite Particle Size P Nonestab
Category : p
Grade : Grade III
Size : S

Copyright © 2025 - OFB