1) BRASS ROD 23 MM BS 2872 CZ 128 LF 0711900023[07]()
Specification : BRASS ROD 23 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| BS|2872-89 GDE-CZ 128.
R
Nonestab
2) BRASS ROD 11MM BS2874 CZ122 M LF 0712203011[07]()
Specification : BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.
R
Nonestab
3) BRASS ROD 17MM SPECN IS 319 89 GR 2 LF 0712100017[07]()
Specification : BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.
R
Nonestab
4) BRASS ROD 11 MM BS 2874 CZ122 H LF 0712200012[07]()
Specification : BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H
R
Nonestab
5) BRASS ROD 4MM BSEN12166 CUZN35PB2 LF 0717501004[07]()
Specification : BRASS ROD 4 +/-0.05 MM DIA IN ST. LENGTH OF 2 METERS MIN.TO SPECN.BS EN 12166:2011 DESIGN.CuZn35Pb2 MATERIAL CONDITIONR540 WITH UTS=54-65 Kgf/MM2 & ELONGATION=5% MIN
R
Nonestab
6) BRASS ROD 14 MM BS 2874 CZ124 LF 0711900014[07]()
Specification : BRASS ROD 14+/-0.05 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN.LEADED BRASS CZ-124 SEPCN.BS-2874 (1969).
R
Nonestab
7) BRASS ROD 4MM BSEN12166 CUZN39PB2 LF 0717501005[07]()
Specification : BRASS ROD 4MM BSEN12166 CUZN39PB2
R
Nonestab
8) BRASS ROD 8 5 MM IS 4170 CU ZN 40 LF 0711906010[07]()
Specification : BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.
R
Nonestab
9) BRASS ROD 6 35MM IS 319 GRD 1 HB LF 0711904006[07]()
Specification : BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.
R
Nonestab
10) BRASS ROD 9 5MM OD IS 319 89 GR 2 LF 0712100010[07]()
Specification : BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".
R
Nonestab
11) BRASS ROD 29 MM BS2874 CZ122 M LF 0712200029[07]()
Specification : BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION.
R
Nonestab
12) BRASS ROD 8MM BS2874 CZ122 M LF 0712100008[07]()
Specification : BRASS ROD 8MM BS2874 CZ122 'M'
R
Nonestab
13) BRASS ROD 17MM BS2874 CZ121 PB3 LF 0712100933[07]()
Specification : BRASS ROD 17MM BS2874 CZ121 PB3
R
Nonestab
14) BRASS ROD 21MM BS2874 CZ122 M LF 0712202021[07]()
Specification : BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".
R
Nonestab
15) BRASS ROD 37 5MM BS2874 CZ122M 0712200038[07]()
Specification : BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.
R
Nonestab
16) BRASS ROD 14MM BS2874 CZ122 M LF 0717703904[07]()
Specification : BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 8 5 MM LF 0711906011
Description : BRASS ROD 8 5 MM LF 0711906011()
Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Brass rod 8 5mm bs 2874 cz129 m LF 0741100004
Description : Brass rod 8 5mm bs 2874 cz129 m LF 0741100004()
Specification : Brass rod 8 5mm(-0.050)mm Dia in straight length of 3.0meter(-0.2m max) to specn:BS-2874-CZ-129 cond. 'M' circular ovality 0.020mm max; straightness 01mm in 01 meter & rod should be packed in a suitable box to prevent bending during trans
Specification : CHARECTER 1 THE MATERIAL SHALL BE PRACTICAL GRADE AND HAVING CHEMICAL FORMULA OF 2.5 DITERTIARY BUTYLHYDROQUINONE. (2) THE MATERIAL SHALL BE CRYSTALINE SOLID, WHIT OR LIGHT TAN IN COLOUR .(3) MELTING POING 215+5 DEGREE CENTIGRADE (AX .
Specification : TO HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/8. HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO. 3 DATED 07.09.2012 AND AMENDMENT AS PER HEMRL LETTER NO. HEMRL/SRP/PIN/PROD/NS/54 DT. 26.09.2013
Specification : AS PER SPECN NO.ARDE/SPECN/PINAKA/RKT-08. ISSUE NO.2.0 REV. NO.0 PAGE NO.34APPENDIX - A-7.
R
Estab
13) NAPTHALENE GRADE I
Description : NAPTHALENE GRADE I()
Specification : NAPTHALENE GRADE I PURESPECN. NO IS:539-1974. 2ND REV REAFFIRMED 2011NAPTHALENE SHOULD BE IN BALL FORM
R
Estab
14) Iso Propyl Alcohol
Description : Iso Propyl Alcohol()
Specification : IS: 2631-1976REV.NO.1 REAFFIRMED 2015. WITH FOLLOWING AMENDMENT.(A) RESIDUE ON EVAPORATION 0.0025 GM./PER 100 ML. MAX.INSTEAD OF 0.OO4 GM./100 ML. MAX.(B)WATER CONTENT 0.1 % MAX. INSTEAD OF 0.5 % MAX.
R
Estab
15) Di Phenyl Amine
Description : Di Phenyl Amine()
Specification : SPCN. JSS-6810-129:2015 AND REVISION NO.3,DC NO.5395-ME DT.01.02.2016(1)PRIMARY AMINES O.10% INSTEAD OF 0.20% MAX.(2)SETTING POINT BETWEEN 51.7 DEGREE CELCIUS TO 53 DEGREE CELCIUS INSTEAD OF 51.5 DEGREE CELCIUS TO 53 DEGREE CELCIUS.(3)MOI
Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
Specification : CHARECTER 1 THE MATERIAL SHALL BE PRACTICAL GRADE AND HAVING CHEMICAL FORMULA OF 2.5 DITERTIARY BUTYLHYDROQUINONE. (2) THE MATERIAL SHALL BE CRYSTALINE SOLID, WHIT OR LIGHT TAN IN COLOUR .(3) MELTING POING 215+5 DEGREE CENTIGRADE (AX .
Specification : TO HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/8. HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO. 3 DATED 07.09.2012 AND AMENDMENT AS PER HEMRL LETTER NO. HEMRL/SRP/PIN/PROD/NS/54 DT. 26.09.2013
Specification : AS PER SPECN NO.ARDE/SPECN/PINAKA/RKT-08. ISSUE NO.2.0 REV. NO.0 PAGE NO.34APPENDIX - A-7.
R
Estab
13) NAPTHALENE GRADE I
Description : NAPTHALENE GRADE I()
Specification : NAPTHALENE GRADE I PURESPECN. NO IS:539-1974. 2ND REV REAFFIRMED 2011NAPTHALENE SHOULD BE IN BALL FORM
R
Estab
14) Iso Propyl Alcohol
Description : Iso Propyl Alcohol()
Specification : IS: 2631-1976REV.NO.1 REAFFIRMED 2015. WITH FOLLOWING AMENDMENT.(A) RESIDUE ON EVAPORATION 0.0025 GM./PER 100 ML. MAX.INSTEAD OF 0.OO4 GM./100 ML. MAX.(B)WATER CONTENT 0.1 % MAX. INSTEAD OF 0.5 % MAX.
R
Estab
15) Di Phenyl Amine
Description : Di Phenyl Amine()
Specification : SPCN. JSS-6810-129:2015 AND REVISION NO.3,DC NO.5395-ME DT.01.02.2016(1)PRIMARY AMINES O.10% INSTEAD OF 0.20% MAX.(2)SETTING POINT BETWEEN 51.7 DEGREE CELCIUS TO 53 DEGREE CELCIUS INSTEAD OF 51.5 DEGREE CELCIUS TO 53 DEGREE CELCIUS.(3)MOI
Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
Specification : CHARECTER 1 THE MATERIAL SHALL BE PRACTICAL GRADE AND HAVING CHEMICAL FORMULA OF 2.5 DITERTIARY BUTYLHYDROQUINONE. (2) THE MATERIAL SHALL BE CRYSTALINE SOLID, WHIT OR LIGHT TAN IN COLOUR .(3) MELTING POING 215+5 DEGREE CENTIGRADE (AX .
Specification : TO HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/8. HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO. 3 DATED 07.09.2012 AND AMENDMENT AS PER HEMRL LETTER NO. HEMRL/SRP/PIN/PROD/NS/54 DT. 26.09.2013
Specification : AS PER SPECN NO.ARDE/SPECN/PINAKA/RKT-08. ISSUE NO.2.0 REV. NO.0 PAGE NO.34APPENDIX - A-7.
R
Estab
13) NAPTHALENE GRADE I
Description : NAPTHALENE GRADE I()
Specification : NAPTHALENE GRADE I PURESPECN. NO IS:539-1974. 2ND REV REAFFIRMED 2011NAPTHALENE SHOULD BE IN BALL FORM
R
Estab
14) Iso Propyl Alcohol
Description : Iso Propyl Alcohol()
Specification : IS: 2631-1976REV.NO.1 REAFFIRMED 2015. WITH FOLLOWING AMENDMENT.(A) RESIDUE ON EVAPORATION 0.0025 GM./PER 100 ML. MAX.INSTEAD OF 0.OO4 GM./100 ML. MAX.(B)WATER CONTENT 0.1 % MAX. INSTEAD OF 0.5 % MAX.
R
Estab
15) Di Phenyl Amine
Description : Di Phenyl Amine()
Specification : SPCN. JSS-6810-129:2015 AND REVISION NO.3,DC NO.5395-ME DT.01.02.2016(1)PRIMARY AMINES O.10% INSTEAD OF 0.20% MAX.(2)SETTING POINT BETWEEN 51.7 DEGREE CELCIUS TO 53 DEGREE CELCIUS INSTEAD OF 51.5 DEGREE CELCIUS TO 53 DEGREE CELCIUS.(3)MOI
Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
1) TAPE ADHESIVE W P FABRIC 50MM WIDE LF 2101773048
Description : TAPE ADHESIVE W P FABRIC 50MM WIDE LF 2101773048()
Specification : TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14.
E
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 11MM BS2874 CZ122 M LF 0712203011
Description : BRASS ROD 11MM BS2874 CZ122 M LF 0712203011()
Specification : BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS STRIP 22X1point02 MM LF 0710664345
Description : BRASS STRIP 22X1point02 MM LF 0710664345()
Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
R
Nonestab
2) BRASS STRIP 14point5 X 0point69MM BS2870CZ106 LF 0710664184
Description : BRASS STRIP 14point5 X 0point69MM BS2870CZ106 LF 0710664184()
Specification : BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO
1) PAPER KRAFT AMMUNITION
Description : PAPER KRAFT AMMUNITION()
Specification : PAPER KRAFT AMMUNITION TO SPECN. NO. JSS 8135-017:2016 (REV-I) SIZE 483X635 MM, SUSTENANCE, GRAM PER SQUARE METER 125+_ 5 DS CAT NO. 8135-000349.
P
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Dehu Road
[ENR Registration]
Name
Specification
Use
Status
1) Tape adhesive water Proof Fabric 12.7mm wide
Description : Tape adhesive water Proof Fabric 12.7mm wide()
Specification : IND/ME/790(a)
P
Estab
Category : p
Grade : 2
Size :
S
1) Heavy Vehicle Factory
[ENR Registration]
Name
Specification
Use
Status
1) PIPE GR ST B20 22MM OD X 2MM THK TO 0111555257
Description : PIPE GR ST B20 22MM OD X 2MM THK TO 0111555257()
Specification : GOST:8733(22X2)
R
Estab
2) WIRE STAINLESS SOFT 1 2 MM TO 0326011012
Description : WIRE STAINLESS SOFT 1 2 MM TO 0326011012()
Specification : AISI:304(1.2)SOFT
R
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) VCI POLYTHENE BAGS FOR 30 MM SARATH
Description : VCI POLYTHENE BAGS FOR 30 MM SARATH()
Specification : AS PER SPECIFICATION / DRAWING REQUIREMENT MENTIONED IN OUR OTE PUBLISHED FOR THE ITEM IN OUR E-PROC SITE.
E
Estab
2) VCI POLYTHENE BAG FOR 20 MM AMR
Description : VCI POLYTHENE BAG FOR 20 MM AMR()
Specification : AS PER THE SPECIFICATION MENTIONED IN THE OTE PUBLISHED FOR THE ITEM VIDE TENDER REFERENCE NO.111MMETT18001239.
E
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) POLYTHENE PROTECTIVE BAG FOR 30 MM CC VCI
Description : POLYTHENE PROTECTIVE BAG FOR 30 MM CC VCI()
Specification : VAPOUR CORROSION INHIBITOR (VCI) LOW DENSITY POLYTHENE BAGS, SIZE 250 MM, LENGTH X 75 MM WIDTH X 0.1 MM (+/- 10%) THICKNESS FOR 30 MM SARATH CARTG.CASES AS PER JSS 9330-03-2014 REV.NO.03
E
Estab
2) POLYTHENE PROTECTIVE BAG FOR 20 MM AMR CC
Description : POLYTHENE PROTECTIVE BAG FOR 20 MM AMR CC()
Specification : VAPOUR CORROSION INHIBITOR (VCI) LOW DENSITY POLYTHENE BAG FOR 20 AMR CC.
E
Estab
Category : s
Grade : 3
Size :
S
3905
TOTAL PRECISION
MTC/D-22 PANKI INDUSTRIAL AREA SITE-3 PANKI KANPUR Panki Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 2690072
1) GUIDE UPPER RIGHT IN WITHOUT HEAT TREATMENT CONDITION FOR MAG
Description : GUIDE UPPER RIGHT IN WITHOUT HEAT TREATMENT CONDITION FOR MAG()
Specification : GUIDE UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 27011-SA DT- 14.01.2017.IN WITHOUT HEAT TREATMENT CONDITION.
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK III DRG NO PHMK III 1 2 THROUGH MIM ROUTE
Description : PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK III DRG NO PHMK III 1 2 THROUGH MIM ROUTE()
Specification : PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-2, D.A. NO. 05/18 DT.07.03.2018. THROUGH MIM ROUTE.
C
Estab
2) NUT RETAINING HANDLE for MAG
Description : NUT RETAINING HANDLE for MAG()
Specification : LOCKING PLATE AS PER DRG NO-161-697
C
Estab
12) STRIP TO FGK DRG. NO. T-90/SK/0009 FOR STORE DRG. NO. 2A46M.02-148
Description : STRIP TO FGK DRG. NO. T-90/SK/0009 FOR STORE DRG. NO. 2A46M.02-148()
Specification : STRIP TO FGK DRG. NO.161-697
C
Estab
13) COVER CATCH
Description : COVER CATCH()
Specification : CATCH HOUSING AS PER DRG. NO. 166-256
C
Estab
14) SCREW
Description : SCREW()
Specification : LOCKING SCREW AS PER DRG NO. 161-697
C
Estab
15) CAP FOR SHARANG 161 473
Description : CAP FOR SHARANG 161 473()
Specification : CAP AS PER DRG NO-161-473 FOR SHARANG ORDNANCE
C
Estab
Category : s
Grade : 3
Size :
S
3906
CROWN TRADING CO.
58 A NETAJI SUBHASH ROAD KOLKATA WEST BENGAL
PIN1 : 700001
Phone No. : 9883068292
1) ALUMINIUM STRIP 25X0 point 5mm IS 737 DESIG 19500 LF 0615360000
Description : ALUMINIUM STRIP 25X0 point 5mm IS 737 DESIG 19500 LF 0615360000()
Specification : ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-2008 DESIG.19500 CONDITION 'O'
Specification : COPPER BALL 3.175 MM +/-0.051 TO DRG. PT. NO. QX-159 DC NO 35639-A DT 28/12/93.
R
Estab
2) BAR TO DRG NO F1301 050950 D LF 9911334375
Description : BAR TO DRG NO F1301 050950 D LF 9911334375()
Specification : BAR TO DRG NO F1301-050950-D DC(I) 35049-A DT 14/03/91 SPECN:- F-1301-902840-B DT 14/06/85.
R
Estab
3) PLUG FIRING REPRESENTING TRACER AND IGNITAR SHELL NO 14 MARK N2 LF 9911357522
Description : PLUG FIRING REPRESENTING TRACER AND IGNITAR SHELL NO 14 MARK N2 LF 9911357522()
Specification : DRG.NO. NAD 2037 R.NO. NIL DT. 28-5-04
C
Estab
4) MAGAZINE BODY 011 FOR MULTIMODE GRD LF 9911357581
Description : MAGAZINE BODY 011 FOR MULTIMODE GRD LF 9911357581()
Specification : AS PER SPECIFIED DRG.
C
Estab
5) PLUNGER 012 FOR MULTIMODE GRD LF 9911357582
Description : PLUNGER 012 FOR MULTIMODE GRD LF 9911357582()
Specification : AS PER SPECIFIED DRG.
C
Estab
6) RIVET 016 FOR MULTIMODE GRD LF 9911357586
Description : RIVET 016 FOR MULTIMODE GRD LF 9911357586()
Specification : AS PER SPECIFIED DRG.
C
Estab
7) SHUTTER SCREW 018 FOR MULTIMODE GRD LF 9911357588
Description : SHUTTER SCREW 018 FOR MULTIMODE GRD LF 9911357588()
Specification : AS PER SPECIFIED DRG.
C
Estab
8) STOPPER PIN 019 FOR MULTIMODE GRD LF 9911357589
Description : STOPPER PIN 019 FOR MULTIMODE GRD LF 9911357589()
Specification : AS PER SPECIFIED DRGS.
C
Estab
9) PLUNGER SPRING 029 FOR MULTIMODE GRD LF 9911357602
Description : PLUNGER SPRING 029 FOR MULTIMODE GRD LF 9911357602()
Specification : AS PER SPECIFIED DRG.
C
Estab
10) CONICAL SPRING 030 FOR MULTIMODE GR LF 9911357603
Description : CONICAL SPRING 030 FOR MULTIMODE GR LF 9911357603()
Specification : AS PER SPECIFIED DRG.
C
Estab
11) STOPPER SPRING 032 FOR MULTIMODE GRD LF 9911357605
Description : STOPPER SPRING 032 FOR MULTIMODE GRD LF 9911357605()
Specification : AS PER SPECIFIED DRG.
C
Estab
12) TRANSIT PIN 035 FOR MULTIMODE GRD LF 9911357613
Description : TRANSIT PIN 035 FOR MULTIMODE GRD LF 9911357613()
2) CAP AND LOCK BOTTOM F1301-905060-P (2013998518)
Description : CAP AND LOCK BOTTOM F1301-905060-P (2013998518)()
Specification : CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
C
Estab
3) CAP AND BOTTOM SPECN: F1301-905060-P (9911350158)
Description : CAP AND BOTTOM SPECN: F1301-905060-P (9911350158)()
Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.
Specification : PLASTIC CONTAINER NO.P-16 EMPTY ASSY.TO DRG.PT NO:TRD-1464/1 ALONGWITH (i)BODY TO DRG. NO. TRD-1465b(ii) LID TO DRG NOTRD-1466b(iii) GASKET TO DRG. NO: TRD-1467a(iv) LABEL TO DRG NO. TRD-1482a
R
Estab
5) SUPPORT TO DRG NO 121959 LF 9911357665
Description : SUPPORT TO DRG NO 121959 LF 9911357665()
Specification : SUPPORT TO DRG NO.TRD 121959 FOR CONTAINER 125MM FSAPDS(IMI)
R
Estab
6) CONTAINER P-10B FOR CARTG PK-3 & PV35 (9911358092)
Description : CONTAINER P-10B FOR CARTG PK-3 & PV35 (9911358092)()
Specification : CONTAINER P-10B TO DRG TRD-1175 CONSISTS OF FOLLOWING ITEMS 1)SLEEVE TO DRG NO.TRD-1177"a" 2)DISC TO DRG NO.TRD-1176 3)LABLE TO DRG NO.TRD-1359"a"4)CONTAINER NO.P-10 EMPTY ASSY.TODRG NO.TRD-1358 CONSIST:A)BODY DRG NO.TRD 1174"a" B)LID TOD
1) LEAD SHEET 19X0.5MM IS405 PT.II (0800160106)
Description : LEAD SHEET 19X0.5MM IS405 PT.II (0800160106)()
Specification : LEAD SHEET 19+/-0.50 MM WIDE X 0.5+/-0.10 MM THICK IN ROLLED CONDITION. SPECN:- IS-405-(PT-II)-1992 (THIRD REVISION) INCOILS WEIGHT 5 KG MAXIMUM, I/D = 25 MM MINIMUM & O/D = OPEN
R
Estab
2) LEAD SHEET 50X2MM IS:405 PT.II-1992 (0800160901)
Description : LEAD SHEET 50X2MM IS:405 PT.II-1992 (0800160901)()
Specification : LEAD SHEET 50+/-0.635 MM WIDE X 2+/- 0.05 MM THICK TO SPECN:IS-405 (PT-II)-1992 (3RD REVISION) IN ROLLED CONDITION
R
Estab
3) LEAD SHEET 28X0.5MM IS:405 PT.II (0800560902)
Description : LEAD SHEET 28X0.5MM IS:405 PT.II (0800560902)()
Specification : LEAD SHEET 28+/- 1 MM WIDE X 0.50+/-0.10 MM THICK IN ROLLED CONDITION SPECN:-IS-405 (PT-II)-1992 (3rd REVISION) IN COILOF WEIGHT 2 TO 2.5 KG, I/D OF COIL 70 TO 75 MM
R
Estab
4) LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005
Description : LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005()
Specification : LEAD PIG ORDINARY (FLAT) 500 MM LONG X 100 MM WIDE X 70 MM THICK IN WEIGHT OF 30KG,Pb-99.99% TO SPECN.IS-27-1992(FOURTH REVISION)(REAFFIRMED 2014)(AMENDMENT NO1 APRIL 1998)(AMENDMENT NO2 DECEMBER 2010).
R
Estab
5) WIRE LEAD ANT 5.66TO 5.74MM JSS9530 (0811200005)
Description : WIRE LEAD ANT 5.66TO 5.74MM JSS9530 (0811200005)()
Specification : LEAD ANTIMONY ALLOY WIRE 5.66 MM TO 5.74 MM DIA WITH 1.8 TO 2.2%ANTIMONEY TO SPECN:JSS-9530-02-1996(REV.NO.2)(REAFFIRMED-2008)(PbSb-2). MATERIAL TO BE SUPPLIED IN REEL FORM, EACH WEIGHING 45 TO 50 KGS.
R
Estab
6) LEAD SEAL 10 MM DIA LF 1861901001
Description : LEAD SEAL 10 MM DIA LF 1861901001()
Specification : LEAD SEAL 10 MM DIA TO SPECN:IS-13923-1993 (REAFFIRMED-2003)
R
Estab
7) LEAD SEAL 12 MM LF 1861901301
Description : LEAD SEAL 12 MM LF 1861901301()
Specification : LEAD SEAL 12 MM DIA TO SPECN:IS-13923-1993 (REAFFIRMED-2018)
1) STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021)
Description : STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021)()
Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.
R
Estab
2) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)
Description : STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK
R
Estab
3) STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)
Description : STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)()
Specification : STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st
R
Estab
4) STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)
Description : STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)()
Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2004)1st REV)GRADE 14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2003)1s
R
Estab
5) STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)
Description : STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Estab
6) MS ROD 64MM IS-1570 GR.25C4 (0133005064)
Description : MS ROD 64MM IS-1570 GR.25C4 (0133005064)()
Specification : MS ROD 64MM IS-1570 GR.25C4
R
Estab
7) STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018)
Description : STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018)()
Specification : STEEL ROD 18+0.05/-0.10MM DIA,TO SPECN.SS/D32 TO JSS-9510-01IN NORMALISED CONDITION OR BS-970-PT-1-1983 GRADE O8OM5O INNORMALISED CONDITION,IN ST.LENGTH OF3+/-0.1MTR,HARDNESS 187HB TO 207 HB.MATERIAL TO BE SUPPLIED WITH COLOUR CODE BASECO
R
Estab
8) STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029)
Description : STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029)()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A
R
Estab
9) STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029)
Description : STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029)()
Specification : STEEL ROD 29[+0.075/-0.13] MM DIA IN ST.LENGTH OF 2.5 TO 3.0MTR TO SPECN:IS-1570( PT-III)-1979 (FIRST REVISION)(REAFFIRMED 2004) GR.40C10S18.
R
Estab
10) STEEL ROD 32MM 50-TY-14-1-2884-80 (0187100032)
Description : STEEL ROD 32MM 50-TY-14-1-2884-80 (0187100032)()
Specification : STEEL ROD 32(+0.00/-0.10)MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTR.TO SPECN: STEEL GRADE 50 TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES AS PER SPECN NO. ML 002 SHT. 1 OF 1 REVISION NO. 2 DATED 10-5-96
R
Estab
11) STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029)
Description : STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029)()
Specification : COLD DRAWN STEEL ROD 29MM+0.07/-0.13 DIA IN STREIGTH LENGTHOF 2 TO 2.5 MTRS TO SPECN.BS-970-817 M40 (EN24) ORIS-5517-1998 (REV.1) 40 Ni 6 Cr4 Mo3 .
Specification : ALUMINIUM PAINT FOR GENERAL PURPOSE IN DUAL CONTAINERS TYPE BRUSHING TO SPECN IS 2339 1963
R
Estab
3) PAINT DEEP BRONZE GREEN ISC 224 ITEM CODE 1011507000
Description : PAINT DEEP BRONZE GREEN ISC 224 ITEM CODE 1011507000()
Specification : PAINT DEEP BRONZE GREEN ISC 224
R
Estab
4) PAINT BLACK BRUSHING LF 1011507001
Description : PAINT BLACK BRUSHING LF 1011507001()
Specification : PAINT READY MIXED AIR-DRYING BRUSHING MAT FINISH,DULL BLACK TO SPECN:- IS-168-1993(REAFFIRMED 2002)(3RDREV)DCNO3685-MEDT 19-03-01 AS APPLICABLE FOR DEFENCE USE.
Specification : PAINT READY MIXED AMMN. AIR DRYING BRUSHING SEMI-GLOSSY FOR GENERAL PURPOSE TURQUIOISE BLUE ISC NO.-102 OF IS-5-2007(6TH REV) TO SPECN 1S-168-1993(REAFFIRMED 2002)(3RD REV) DC NO. DC NO.3685-ME DT 19/3/01 AS APPLICABLE FOR DEFENCE USE.
R
Estab
6) PAINT BUFF MIDDLE GP BRUS IS 168 SG ITEM CODE 1011507359
Description : PAINT BUFF MIDDLE GP BRUS IS 168 SG ITEM CODE 1011507359()
Specification : PAINT BUFF MIDDLE GP BRUS IS 168 SG
R
Estab
7) PAINT RED SIGNAL ISC537 IS168 SG LF 1011507537
Description : PAINT RED SIGNAL ISC537 IS168 SG LF 1011507537()
Specification : PAINT READY MIXED AIR DRYING SEMI GLOSSY FINISH FOR GENERAL PURPOSE BRUSHING SIGNAL RED ISC NO.537 OF IS-5-2007(6th Rev) TO SPECN:-IS-168-1993 REAFF.2002 DC NO. 3685-MEDT. 19-03-01. (3rd REV.) (AS APP LICABLE FOR DEFENCE USE )
R
Estab
8) PAINT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE BRUSHING LIGHT BRUNSWICK GREEN ISC 225 IS 168 MF ITEM CODE 1011508225
Description : PAINT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE BRUSHING LIGHT BRUNSWICK GREEN ISC 225 IS 168 MF ITEM CODE 1011508225()
Specification : PAINT L BRUNS GREEN ISC 225 IS 168 MF
R
Estab
9) PAINT PRIMER RED OXIDE LF 1011508446
Description : PAINT PRIMER RED OXIDE LF 1011508446()
Specification : PAINT READY MIXED PRIMING, RED OXIDE. AMMUNITION, AIR DRYINGMATT FINISH, BRUSHING TO SPECN NO. JSS-8010-68:1994:REVISIONNI.1 DC NO. 3470-ME DT. 14-1-98,
R
Estab
10) paint ready mixed air drying matt finish for general purpose olive green item code 1011509314
Description : paint ready mixed air drying matt finish for general purpose olive green item code 1011509314()
Specification : ISC-220 OF IS-5-2007 (6TH REV) TO SPECN IS-168-1993 (THIRD REV) (REAFFIRMED 2002) DC NO. 36851030- ME DT19-03-2001 AS APPLICABLE FOR DEFENCE USE)
R
Estab
11) PAINT BLACK STENCIL MAT FIN IS138 LF 1011538001
Description : PAINT BLACK STENCIL MAT FIN IS138 LF 1011538001()
Specification : PAINT READY MIXED AIR-DRYING MARKING SMOOTH & MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING/STENCILING BLACKTO SPECN:IS-138-1992(3RD REVISION) REAFFIRMED 2009 WITH AMENDMENT NO.1 APRIL 2000 .AS APPLICABLE FOR DEFENCE USE.
R
Estab
12) READY MIXED PAINT MARKING SMOOTH AND MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING STENCILING TO SPECN IS 138 1992 ITEM CODE 1011538002
Description : READY MIXED PAINT MARKING SMOOTH AND MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING STENCILING TO SPECN IS 138 1992 ITEM CODE 1011538002()
Specification : READY MIXED PAINT MARKING SMOOTH AND MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING STENCILING TO SPECN IS 138 1992 (3RD REV) (REAFF. 2014) WITH AMENDMENT NO.1 APRIL 2000, AS APPLICABLE FOR DEFENCE USE.
R
Estab
13) PAINT GOLDEN YELLOW MATT FIN IS 138 ITEM CODE 1011538355
Description : PAINT GOLDEN YELLOW MATT FIN IS 138 ITEM CODE 1011538355()
Specification : PAINT GOLDEN YELLOW MATT FIN IS 138
R
Estab
14) paint red signal ISC 357 IS 138 SG ITEM CODE 1011538537
Description : paint red signal ISC 357 IS 138 SG ITEM CODE 1011538537()
Specification : paint red signal ISC 357 IS 138 SG
3) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)
Description : TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)()
Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.
C
Estab
4) SHUTTER 027 FOR MULTIMODE GRD LF 9911357611
Description : SHUTTER 027 FOR MULTIMODE GRD LF 9911357611()
Specification : AS PER SPECIFIED DRG.
R
Estab
5) TOP PLATE 028 FOR MULTIMODE GRD LF 9911357612
Description : TOP PLATE 028 FOR MULTIMODE GRD LF 9911357612()
Specification : AS PER SPECIFIED DRG.
R
Estab
6) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)
Description : MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)()
Specification : MANTLE TO DRG.NO.TRD-2-2-2271.
C
Estab
7) SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)
Description : SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)()
Specification : SPACER TO DRG.NO.TRD-2-2-2273.
C
Estab
8) SPIRAL NAI LF 9911358044
Description : SPIRAL NAI LF 9911358044()
Specification : COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDN
Specification : BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO
R
Estab
5) BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345)
Description : BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345)()
Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
Specification : BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120
R
Estab
9) BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132)
Description : BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132)()
Specification : BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM.
R
Estab
10) BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159)
Description : BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159)()
Specification : BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
Specification : COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV.
Specification : COPPER ALLOY STRIP 15.875+_0.5 MM WIDE X 0.457+_0.025 MM THICK LENGTH OF 3 METERS MIN. IN COILS TO SPECN:-IS:3167 OF1982 (REAFFIRMED-DEC.1998)(FIST REVISION) CONDITION ANNEALEDHARDNESS 65-85 VPN.
R
Estab
13) BRASS STRIP 25.4X0.63 MM (0717560949)
Description : BRASS STRIP 25.4X0.63 MM (0717560949)()
Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1
Specification : BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981.
R
Estab
Category : p
Grade : 3
Size :
S
3916
HIND HARDWARE AND TOOLS AGENCY
17 SAGAR DUTTA LANE KOLKATA WEST BENGAL
PIN1 : 700073
Phone No. : 07612743368
1) WIRE GI 0.90MM/20SWG IS280 HARD (0133013091)
Description : WIRE GI 0.90MM/20SWG IS280 HARD (0133013091)()
Specification : WIRE IRON GALVANISED (20 SWG) 0.90 MM TO SPECN.IS 280-1978 (REAFFIRMED-1997) (THIRD REV.)WITH AMENDMENT NO.1 JULY 1984& AMENDMENT NO.2 APRIL 2002 WITH UTS-550-825 MPa-MAX (HARDCONDITION)
R
Estab
2) WIRE GI 18 LF 0133013122
Description : WIRE GI 18 LF 0133013122()
Specification : WIRE IRON GALVANISED 18 SWG (1.25 MM DIA) SPECN:IS-280-1978 (THIRD Revision) (REAFFIRMED-1997) WITH AMENDMENT NO.1 JULY1984 AND NO.2 APRIL 2002 WITH UTS-550-825 MPa (MAX) HARDCONDITION.
Specification : COPPER TACKS 1/2" LENGTH X 1.5 MM DIA.
R
Estab
10) WIRE MESH GI LF 1757736007
Description : WIRE MESH GI LF 1757736007()
Specification : GALVANISED IRON WIRE MESH, SIZE 2.5 X 2.5 MM, 914 MM WIDE WIRE DIA 0.5MM TO SPECN IS-280-1978 (3rd REVISION)REAFFIRMED-1997 AMDT.NO.1 JULY 1984 AND AMDT NO.2 APRIL 2002 CONDITIONANNEALED SOFT DRAWN
1) CATHODE COPPER IS 191
Description : CATHODE COPPER IS 191()
Specification : IS:191:2007, GRADE/DESIGNATION :CU-CATH-2 SIZE:APPROX 200MM-280MM WIDTH X 250 MM-1000 MM LENGTH AND WEIGHT LESS THAN 30.00 KG OF EACH CUT PIECE.
R
Estab
Category : p
Grade : 1
Size :
L
3919
GEEMAXTECHNOLOGIES
1/237,THACHAN THOTTAM,KATTAMPATTI VILLAGE SARCARSAMAKULAM,ANNUR COIMBATORE Tamil Nadu
PIN1 : 641107
Phone No. : 9043832893 GSTIN : 33AAIFG7514K1ZB
1) SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER
Description : SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER()
Specification : SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03
C
Estab
Category : p
Grade : 3
Size :
S
1) Field Gun Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) ARM (155mm FH Gun)
Description : ARM (155mm FH Gun)()
Specification : AS PER DRG. NO. 6358150
C
Estab
2) BEARING SLEEVE DS CAT FOR MK II SPARE
Description : BEARING SLEEVE DS CAT FOR MK II SPARE()
Specification : BEARING SLEEVE D.S CAT NO.3120-004588(ILG-167) FOR MK-II SPARE
28) MAIN SPRING SWIVEL MK-III
Description : MAIN SPRING SWIVEL MK-III()
Specification : AS PER FGK DRG.NO. 32-0121 MK-III
C
Estab
29) MANUFACTURING OF COMPONENTS
Description : MANUFACTURING OF COMPONENTS()
Specification : SLIDE RING
C
Estab
30) GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III & NIRBHEEK
Description : GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III & NIRBHEEK()
Specification : AS PER SPECIFICATION/REQUIREMENT
C
Estab
31) NOZZLE AS PER DRG NO. 2A46-01-05.
Description : NOZZLE AS PER DRG NO. 2A46-01-05.()
Specification : NOZZLE AS PER DRG NO. 2A46-01-05.
C
Estab
32) All types of extruded Rubber profiles i.e. Beadings, Channels, Sections, Tubes etc
Description : All types of extruded Rubber profiles i.e. Beadings, Channels, Sections, Tubes etc()
90) SWIVEL BUTT SUB ASSEMBLY
Description : SWIVEL BUTT SUB ASSEMBLY()
Specification : AS PER DRG. & SPECIFICATION
C
Estab
91) ORDNANCE AND REVOLVER COMPONENTS
Description : ORDNANCE AND REVOLVER COMPONENTS()
Specification : AS PER DRG. & SPECIFICATION
C
Estab
92) WASHER
Description : WASHER()
Specification : AS PER DRG.NO. 5360-001836
C
Estab
93) WASHER SPRING
Description : WASHER SPRING()
Specification : AS PER DRG. NO.SP-00007,5310-001473
C
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Adopter for Cleaning of Bore by pull Through
Description : Adopter for Cleaning of Bore by pull Through()
Specification : ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010
C
Estab
2) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56
Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56()
Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16
C
Estab
3) SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER
Description : SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER()
Specification : SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03
