Specification : CUPRO NICKEL STRIP SIZE 26+/-0.50 MM WIDE x 0.50[+0.02/-0.03 MM] THICK IN COILS. TO SPECN:- BS EN 1652:1998 DESIGN Cu Ni 25 WITH % Bi RESTRICTED TO 0.002%,MATERIAL CONDITION R-290 OR BS EN 1652:1998 DESIGN Cu Ni 10 Fe 1 Mn. MATERIAL CONDI
R
Nonestab
2) WIRE LEAD ANT 5 66TO 5 74MM JSS9530 LF 0811200005[08]()
Specification : LEAD ANTIMONY ALLOY WIRE 5.66 MM TO 5.74 MM DIA WITH 1.8 TO 2.2%ANTIMONEY TO SPECN:JSS-9530-02-1996(REV.NO.2)(REAFFIRMED-2008)(PbSb-2). MATERIAL TO BE SUPPLIED IN REEL FORM, EACH WEIGHING 45 TO 50 KGS.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 0801789173 SEAL LEAD SIZE 10 MM DIA
Description : 0801789173 SEAL LEAD SIZE 10 MM DIA()
Specification : SPECN. IS: 13923- 1993 (AMDT. 1) REAFFIRMED-1997
R
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY
Description : LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY()
Specification : LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY
1) BUSH TO SK NO OTF DD 013 IN FC
Description : BUSH TO SK NO OTF DD 013 IN FC()
Specification : AS PER DRG
C
Estab
2) PLATE TO DET No 2 8 OF DRG NO SK NO OTF DD 016
Description : PLATE TO DET No 2 8 OF DRG NO SK NO OTF DD 016()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) MOULDED RING OF GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL
Description : MOULDED RING OF GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL()
Specification : AS PER OFDC SPECIFICATION
C
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) MOULDED RING OF GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL
Description : MOULDED RING OF GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL()
Specification : AS PER OFDC SPECIFICATION
C
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) NYLON RING TO DRG. NO. ISX- 426
Description : NYLON RING TO DRG. NO. ISX- 426()
Specification : NYLON RING TO DRG. NO. ISX- 426 required for Shell 130mm HE1B
P
Estab
2) Lifting Plug to Drg No.5191856 with Rubber Gasket to Drg No. 6391043
Description : Lifting Plug to Drg No.5191856 with Rubber Gasket to Drg No. 6391043()
Specification : Lifting Plug to Drg No.5191856 with Rubber Gasket to Drg No. 6391043
E
Estab
Category : p
Grade : 3
Size :
S
3763
VETRI ENGINEERING
72/4,AMMANI KONDALAMPATTY ,KATTUR,NATTAMANGALAM PO ,SALEM - 636010. AMMANI KONDALAMPATTY SALEM Tamilnadu
PIN1 : 636010
Phone No. : 2271814
1) SOLID TYRE 765 34 CD124
Description : SOLID TYRE 765 34 CD124()
Specification : SOLID TYRE 765 34 CD124
C
Estab
2) GLOW PLUG 765 06 CD 409
Description : GLOW PLUG 765 06 CD 409()
Specification : GLOW PLUG 765 06 CD 409
C
Estab
Category : p
Grade : 2
Size :
S
3764
AKAYGENTS PRIVATE LIMITED
NOOR MAHAL, NEW NO.23/1(OLD NO,44/1) GROUND FLOOR MC NICHOLAS ROAD CHETPET, CHENNAI Tamil Nadu
PIN1 : 600031
Phone No. : 28360066 GSTIN :
33AAACA2936L1ZT
1) SET OF INNER PACKING FITMENT FOR PACKING OF MAIN BODY ASSY LF 9911358102
Description : SET OF INNER PACKING FITMENT FOR PACKING OF MAIN BODY ASSY LF 9911358102()
Specification : SET OF INNER PACKING FITMENT FOR PACKING OF MAIN BODY ASSY. TO TBRL DRG.NO.9774 DET NO.1(PIECE HOUSING-I)2 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4(2 NOS IN A SET)FOR MULTI MODE HAND GRENADE.
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Dehu Road
[ENR Registration]
Name
Specification
Use
Status
1) DISC FOR BOMB 51 MM PACKING
Description : DISC FOR BOMB 51 MM PACKING()
Specification : DRG NO OFDR/BOMB 51MM ILLG/SMK/114
C
Estab
Category : p
Grade : 2
Size :
M
3765
ALOUKIK AGENCIES
22/3 22ND A MAIN ROAD J P NAGAR 2ND PHASE MARENAHLLI BANGALORE Karnataka
PIN1 : 560078
Phone No. : 41214298 GSTIN :
29AAZPN1152H1Z8
1) SET OF INNER PACKING FITMENT FOR PACKING OF MAIN BODY ASSY LF 9911358102
Description : SET OF INNER PACKING FITMENT FOR PACKING OF MAIN BODY ASSY LF 9911358102()
Specification : SET OF INNER PACKING FITMENT FOR PACKING OF MAIN BODY ASSY. TO TBRL DRG.NO.9774 DET NO.1(PIECE HOUSING-I)2 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4(2 NOS IN A SET)FOR MULTI MODE HAND GRENADE.
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Dehu Road
[ENR Registration]
Name
Specification
Use
Status
1) DISC FOR BOMB 51 MM PACKING
Description : DISC FOR BOMB 51 MM PACKING()
Specification : DRG NO OFDR/BOMB 51MM ILLG/SMK/114
C
Estab
Category : p
Grade : 2
Size :
S
1Ordnance Factory Dehu Road
[ENR Registration]
Name
Specification
Use
Status
1) PROFEEL PKG FITMENT FOR BOX B9 A
Description : PROFEEL PKG FITMENT FOR BOX B9 A()
Specification : PROFEEL PKG FITMENT FOR BOX B9 A FOR AKASH SUSTAINER IGNITER TO DRG. NO. OFDR/AKASH SUS/08.
C
Estab
2) SET OF PKG FITMENT FOR CS 38 MM
Description : SET OF PKG FITMENT FOR CS 38 MM()
Specification : SET OF PACKING FITMENT FOR CARTG. 38 MM RED/GREEN/YELLOW PKG. TO DRG. NO. OFDR/1-1/2"/CS(R/G/Y)PACKING/52 CONSISTING OF ONE SET = TOP PIECE-270X140X10-1 PIECE, BOTTOM-270X140X6-1 PIECE SIDES-270X155X10-2 PIECES, ENDS- 120X155X10-2 PIECES.
C
Estab
3) PACKING FITMENT FOR CS 16 MM
Description : PACKING FITMENT FOR CS 16 MM()
Specification : PACKING FITMENT FOR CARTRIDGE SIGNAL 16 MM TO DRAWING NO. CQA(A)/AMMN/3515, PART NO. ISV-2273 DC 37290 A DT. 20-10-2011.
C
Estab
4) PROFEL PACKING FITMENT FOR SHELL 84MM ILLG.
Description : PROFEL PACKING FITMENT FOR SHELL 84MM ILLG.()
1) PROFEEL PKG GR 36M CQA A AMMN 2394 LF 9911356670
Description : PROFEEL PKG GR 36M CQA A AMMN 2394 LF 9911356670()
Specification : SET OF PROFEEL PACKING AS PER DESIG REF.CIA/AMN/2394 DRG PT.NO.ISV.438 GA DC NO.36948-A DT.27/01/04 CONSISTING OF:-(1)PADDING OF10 NOsGRENADE=01NO.TO DRG PT NO.ISV-2096(2)HOLDERLAUNCHER=01NO.TO DRG PT.NO.ISV.2097(3)BAG BULLETS=01NO.TODRGP
Specification : PROFEEL PACKING FITMENT 4PIECE DESIGN TO DRG.PT.NO.ISV-618 ADC 37195-A DT.05-12-2008 WITH COMPONENTS-(1)BOTTOM PIECE TODRG.PT.NO.ISV 2192 (2) MIDDLE BOTTOM PIECE TO DRG.PT.NO.ISV-2193 (3) MIDDLE TOP PIECE TO DRG.PT.NO.ISV 2194 (4)TOP PIEC
R
Estab
3) PROFEEL INNER PKG OF FZ ASY M GR LF 9911358099
Description : PROFEEL INNER PKG OF FZ ASY M GR LF 9911358099()
Specification : SET OF INNER PACKING FITMENT FOR PACKING OF FUZE ASSEMBLY TO TBRL DRG.NO.9774 DET NO.2(PIECE HOUSING-II)3 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4 2 NOS IN A SETFOR MULTI MODE HAND GRENADE.
R
Estab
Category : p
Grade : 3
Size :
S
3767
THE WESTERN INDIA PLYWOODS LTD
MILL ROAD, BALIAPATAM BALIAPATAM KANNUR Kerala
PIN1 : 670010
Phone No. : 9847010930
1) LEAD TIN FOIL(DECOPPERING AGENT)
Description : LEAD TIN FOIL(DECOPPERING AGENT)()
Specification : IND/ME/971:2016
DC NO. 5463-ME DT. 01.06.2016
R
Estab
2) FOIL TINLEAD
Description : FOIL TINLEAD()
Specification : FOIL TIN LEAD SPECN : JSS 9535-06:2010 (REV.NO.2) REAFFIRMED 2016 DC NO.6002-ME DT.24-09-2016 FOR THICKNESS 0.05MM SIZE OF THE STRIP-WIDTH-120MM, THICKNESS-0.05MM ANDLENGTH ADJUSTED TO 60 GRAM.
1) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)
Description : STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK
R
Estab
2) STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032)
Description : STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032)()
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Estab
3) STEEL ROD 32MM DIA GOST-V-10230-75 (0184108032)
Description : STEEL ROD 32MM DIA GOST-V-10230-75 (0184108032)()
Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE
Specification : ARDE/SPECN/PINAKA/RKT-08 ISSUE 02 OF JULY 2015
P
Estab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Bhandara
[ENR Registration]
Name
Specification
Use
Status
1) Melamine Make China/Indonesia
Description : Melamine Make China/Indonesia()
Specification : MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICL
R
Estab
Category : ddp
Grade : 3
Size :
S
3773
BAJAJ CHEMICAL INDUSTRIES
BAJAJ NAGAR POST BOX 16 GONDIA MAHRASTRA
PIN1 : 441601
Phone No. : 07612743368
Specification : N.C. DOPE (APC NO. 236) TO SPECN:JSS-8010-62-2015 (REV. 3) DC NO. 5412-ME DT 31/03/2016. ADDED WITH 0.05% DYE RHODAMINEB BASE CONFIRMING JTO SPECIFICATION IND/ME/517 (A). NOTE: TO BE SUPPLIED IN GALVANISED IRON DRUMS.
R
Estab
4) APC NO 219 VAR NC DYED WITH ROADAMIN ITEM CODE 1013400022
Description : APC NO 219 VAR NC DYED WITH ROADAMIN ITEM CODE 1013400022()
Specification : LACQUER, NITROCELLULOSE, ADHESIVE (AMMUNITION PROTETICE COMPOSITION NO. 219, DYED WITH DYE RHODAMINE) TO SPECN:- JSS-8010-48:2016 (REV NO. 3) DC NO. 6073-ME DT. 22/06/2017
Specification : N.C. DOPE (APC NO. 236) TO SPECN:JSS-8010-62-2015 (REV. 3) DC NO. 5412-ME DT 31/03/2016. ADDED WITH 0.05% DYE RHODAMINEB BASE CONFIRMING JTO SPECIFICATION IND/ME/517 (A). NOTE: TO BE SUPPLIED IN GALVANISED IRON DRUMS.
R
Estab
4) APC NO 219 VAR NC DYED WITH ROADAMIN ITEM CODE 1013400022
Description : APC NO 219 VAR NC DYED WITH ROADAMIN ITEM CODE 1013400022()
Specification : LACQUER, NITROCELLULOSE, ADHESIVE (AMMUNITION PROTETICE COMPOSITION NO. 219, DYED WITH DYE RHODAMINE) TO SPECN:- JSS-8010-48:2016 (REV NO. 3) DC NO. 6073-ME DT. 22/06/2017
Specification : PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992.
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM
1) DISC FOR BOMB 51 MM PACKING
Description : DISC FOR BOMB 51 MM PACKING()
Specification : DRG NO OFDR/BOMB 51MM ILLG/SMK/114
C
Estab
Category : p
Grade : 2
Size :
L
1Ordnance Factory Dehu Road
[ENR Registration]
Name
Specification
Use
Status
1) PROFEEL PKG FITMENT FOR BOX B9 A
Description : PROFEEL PKG FITMENT FOR BOX B9 A()
Specification : PROFEEL PKG FITMENT FOR BOX B9 A FOR AKASH SUSTAINER IGNITER TO DRG. NO. OFDR/AKASH SUS/08.
C
Estab
2) SET OF PKG FITMENT FOR CS 38 MM
Description : SET OF PKG FITMENT FOR CS 38 MM()
Specification : SET OF PACKING FITMENT FOR CARTG. 38 MM RED/GREEN/YELLOW PKG. TO DRG. NO. OFDR/1-1/2"/CS(R/G/Y)PACKING/52 CONSISTING OF ONE SET = TOP PIECE-270X140X10-1 PIECE, BOTTOM-270X140X6-1 PIECE SIDES-270X155X10-2 PIECES, ENDS- 120X155X10-2 PIECES.
C
Estab
3) PACKING FITMENT FOR CS 16 MM
Description : PACKING FITMENT FOR CS 16 MM()
Specification : PACKING FITMENT FOR CARTRIDGE SIGNAL 16 MM TO DRAWING NO. CQA(A)/AMMN/3515, PART NO. ISV-2273 DC 37290 A DT. 20-10-2011.
C
Estab
4) PROFEL PACKING FITMENT FOR SHELL 84MM ILLG.
Description : PROFEL PACKING FITMENT FOR SHELL 84MM ILLG.()
1) PROFEEL PKG FITMENT FOR BOX B9 A
Description : PROFEEL PKG FITMENT FOR BOX B9 A()
Specification : PROFEEL PKG FITMENT FOR BOX B9 A FOR AKASH SUSTAINER IGNITER TO DRG. NO. OFDR/AKASH SUS/08.
C
Estab
2) PROFEEL PKG FITTMENT FOR BOX B9 A FOR AKASH SUSTANER IGNITER
Description : PROFEEL PKG FITTMENT FOR BOX B9 A FOR AKASH SUSTANER IGNITER()
Specification : PROFEEL PKG FITTMENT FOR BOX B9 A FOR AKASH SUSTANER IGNITER TO DRG NO. OFDR/AKASH SUS/08.
C
Estab
3) SET OF PKG FITMENT FOR CS 38 MM
Description : SET OF PKG FITMENT FOR CS 38 MM()
Specification : SET OF PACKING FITMENT FOR CARTG. 38 MM RED/GREEN/YELLOW PKG. TO DRG. NO. OFDR/1-1/2"/CS(R/G/Y)PACKING/52 CONSISTING OF ONE SET = TOP PIECE-270X140X10-1 PIECE, BOTTOM-270X140X6-1 PIECE SIDES-270X155X10-2 PIECES, ENDS- 120X155X10-2 PIECES.
C
Estab
4) PACKING FITMENT FOR CS 16 MM
Description : PACKING FITMENT FOR CS 16 MM()
Specification : PACKING FITMENT FOR CARTRIDGE SIGNAL 16 MM TO DRAWING NO. CQA(A)/AMMN/3515, PART NO. ISV-2273 DC 37290 A DT. 20-10-2011.
C
Estab
5) PROFEL PACKING FITMENT FOR SHELL 84MM ILLG.
Description : PROFEL PACKING FITMENT FOR SHELL 84MM ILLG.()
