List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3561 KANKOO PAINTS PVT LTD
19 gulmohar apartments 2420 East Street Pune Maharashtra
PIN1 : 411001
Phone No. : 26346180
GSTIN : 27AAACK8698R1ZD 		PNEKO0734G

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) APC NO.2 (CEMENT RD 1192K)[10]() Specification : JSS 8030-14 :2009 REV. NO. 3 R Nonestab
2) AMMN.PROTC.COMP. 5(RD 1286)JSS 8030[10]() Specification : JSS:8030-20:2009 REV NO.3 R Nonestab
3) APC 221[10]() Specification : JSS 8010-28 : 2015 REV. 3 R Nonestab
4) APC NO 216[10]() Specification : JSS -8010 -51; 2015 (REVISION NO.4) R Nonestab
5) A P C NO 7[10]() Specification : JSS - 8030 - 19 : 2011 REV. NO. 2 R Nonestab
6) AMMUNITION SEALING COMPOSITION NO 9[10]() Specification : JSS:8030-15: 2015 REV. 3 R Nonestab
7) (APC NO.6A) - ADHESIVE RUBBER ROSIN[10]() Specification : JSS 8040 - 12 : 2012 REV. NO.3 R Nonestab
8) APC.NO.210(N.C.LACQUER UNDYED)[10]() Specification : JSS 8010-64-2015 R Nonestab
9) APC 210 (NC LACQUOR UNDYED)(FOR CT)[10]() Specification : JSS 8010-64-2015 (REV. NO.3) ( FOR CIVIL TRADE ) R Nonestab
10) NC LACQUER THINNER FOR APC 210[10]() Specification : IS:231, IS:170, IS:537 AND JSS:6810-98 R Nonestab
11) THINNER FOR APC 217 MAKING.[10]() Specification : SPECN.IS-170, IS-231, IS-537 R Nonestab
12) A.P.C.NO 219 DYED WITH DYE RHODAMIN[10]() Specification : JSS 8010-48 2012 (REVISION NO.2) DS CAT NO.8010 000 930 R Nonestab
13) VARNISH OIL CLEAR (APC NO.214)[10]() Specification : JSS-8010-41:2014 ; Rev. 4 R Nonestab
14) LACQUER:CLEAR NITRO CELL(APC NO.217[1013401172]() Specification : JSS 8010-42:2014 REV.NO. 4. SUBJECT TO ITS PASSING PRACTICAL TRIALS BY THE USER (IN 20 KGS. JERRYCAN). R Nonestab
15) APC NO 215(VARNISH OIL BITU.RD-1219[10]() Specification : SS 8010 -51 2015 Rev 4 R Nonestab
16) APC NO.6(CEMENT RUBBER ROSIN)[10]() Specification : JSS 8040-12:2012 (REV NO-3) R Nonestab
17) APC NO.224 TO JSS-8010-63:1991[10]() Specification : JSS-8010-63:1991 DC 2830-ME R Nonestab
18) A.P.C NO.218,JSS 1-63-11(PURPLE)[10]() Specification : JSS 8010-63: 1997 REVISION NO.1, DC 3841-ME R Nonestab
19) AMMN PROTECTIVE COMPO NO104 2609-ME[10]() Specification : JSS 8010-45 : 2012 REV 2 DC 5089-ME R Nonestab
20) A P C NO219 2617-ME[10]() Specification : JSS- 8010-48-2012 (revision 2 ) DC 5095-ME R Nonestab
21) WATER PROOFING COMPO RD 1154[10]() Specification : JSS 8030-24:2011 Rev 2 DC:5086-ME R Nonestab
22) AMMN SEALING COMPOSITION NO10[10]() Specification : JSS 8030-15 DC 3745-ME R Nonestab
23) VARNISH NC RD 1198 B TINTED RED.[10]() Specification : IND/ME/ 368 (C) DC 3117/ME DT.23-2-94 R Nonestab
24) AMMN.PROTECTIVE COMPOSITION 225[10]() Specification : JSS 8010-63 DC 2830 ME R Nonestab
25) APC219 DYED ORANGE VARNISH AD.NITRO[10]() Specification : JSS: 8010-48:2012 DC 5095-ME REV. 2 R Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Bhusawal

Name Specification Use Status
1) PAINT R/M A/D O.GREEN ISC-220[45]() Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION R Estab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) 1011517225 PAINT RM AD LIGHT BRS GREEN Description : 1011517225 PAINT RM AD LIGHT BRS GREEN() Specification : AS PER OFBH SPECIFICATION R Estab
2) 1011508220 PAINT RFU AMMN OG STOVE ISC220 Description : 1011508220 PAINT RFU AMMN OG STOVE ISC220() Specification : AS PER OFBH SPECIFICATION R Estab
3) 1013400300 VARNISH SHELLAC 30 PERCENT APC 225 Description : 1013400300 VARNISH SHELLAC 30 PERCENT APC 225() Specification : AS PER OFBH SPECIFICATION R Estab
4) 1011308537 PAINT RM AD SIGNAL RED Description : 1011308537 PAINT RM AD SIGNAL RED() Specification : AS PER OFBH SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001670209 PAINT RED OXIDE ORTHO XYLENE BASED Description : 1001670209 PAINT RED OXIDE ORTHO XYLENE BASED() Specification : PAINT READY MIXED AIR DRYING, MATT, ORTHOXYLENE BASED ZINCCHROME REDOXIDE SPRAYING/BRUSHING/DIPPING/POUR APPLICATIONFOR INNER COATING OF HE SHELLS TO SPECN. IND/ME/964 (PROV)DC-3214-ME DT. 14/12/94.IN PACK.OF 1/2 LIT.CAP. P Estab
2) 1003110514 APC 213 RD 1177 BLUE Description : 1003110514 APC 213 RD 1177 BLUE() Specification : JSS 8010-41 :2006 P Estab
3) 1010801150 APC 210 UNDYED Description : 1010801150 APC 210 UNDYED() Specification : JSS-8010-64:2009 P Estab
4) 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168 Description : 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168() Specification : SPECN IS:5-1994 (FOURTH REVISION) WITH AMENDMENT NO. 1 TO SPECN. IS:168-1993 (THIRD REVISION) P Estab
5) 1011337012 PAINT WHITE MARKING STENCILING SGF Description : 1011337012 PAINT WHITE MARKING STENCILING SGF() Specification : IS: 138- 1992 P Estab
6) 1011535537 PAINT STENC RED SIGNAL IS 138 1992 Description : 1011535537 PAINT STENC RED SIGNAL IS 138 1992() Specification : IS: 138 -1992 P Estab
7) 1011714447 PAINT RED OXIDE ZINC CHROME IS 1874 Description : 1011714447 PAINT RED OXIDE ZINC CHROME IS 1874() Specification : IS:1874:1992 P Estab
8) 1013400174 APC 217 TO SPCN.JSS-8010-42-2009 Description : 1013400174 APC 217 TO SPCN.JSS-8010-42-2009() Specification : SPECN.NO. JSS 8010-42 P Estab
9) 1013401025 APC NO.219 DYED RHOD BASE JSS-8010 Description : 1013401025 APC NO.219 DYED RHOD BASE JSS-8010() Specification : SPECIFICATION NO.JSS-8010-48:2004, REV. NO.1. P Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) APC-219 TO JSS-8010-48:2012 (REV-2) DC NO.5095-ME, DT-05.10.2012.(ORANGE & RED). Description : APC-219 TO JSS-8010-48:2012 (REV-2) DC NO.5095-ME, DT-05.10.2012.(ORANGE & RED).() Specification : APC-219 TO JSS-8010-48:2012 (REV-2) DC NO.5095-ME, DT-05.10.2012.(ORANGE & RED). R Estab
2) PAINT R/M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN_1012700743 Description : PAINT R/M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN_1012700743() Specification : PAINT R/M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN.IND/ ME/ 964(PROV), DCI 5262-ME, DT-24.06.14,MODE OF APPLICATION-SPRAYING/ BRUSHING/ DIPPING/ POUR, FOR INNER COATING OF HE. SHELL. [TO BE SUPPLIED IN 500ML PA R Estab
3) PAINT READYMIXED(SIGNAL RED)AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE Description : PAINT READYMIXED(SIGNAL RED)AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE() Specification : FOR PACKAGE & PETROL CONTAINERS ISC-537 OF IS:5-2007 (SIXTH REVISION) AMMENDMENT NO.1,SPECN.IS-138-1992(3RD.REV.)MODE OF APPLICATION -STENCILLING. AS APPLICABLE FOR DEFENCE USE (TO BE SUPPLIED IN 500ML PACK). R Estab
4) PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY Description : PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY() Specification : PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY TO SPECN:IS.138- 1992 (3RD REV.) (TO BE SUPPLIED IN 500ML PACK) R Estab
Category : p
Grade : 3
Size : S
3562 ESSAR INTERNATIONAL
C-29, UDYOG KUNJ, SITE NO,-5 ROAD NO.-8, DADA NAGAR KANPUR U.P.
PIN1 : 208022
Phone No. : 0512-2295042 		AACFE7309N

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Rivet Front Guide Short to DS CAT No 5320 002939 Description : Rivet Front Guide Short to DS CAT No 5320 002939() Specification : Rivet Front Guide Short to DS CAT No 5320 002939 C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5 56 MM Description : BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5 56 MM() Specification : Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Rivet Flat Head for Housing Body Barrel Extension and Bracket Front Description : Rivet Flat Head for Housing Body Barrel Extension and Bracket Front() Specification : Rivet Flat Head for Housing Body Barrel Extension and bracket front to Drg. No. SK-3145/10 Phosphated to Spech-JSS-0465-01-1988 Class II Oil Finish C Estab
Category : ddp
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN SEAR TRIPPER FOR MAG Description : PIN SEAR TRIPPER FOR MAG() Specification : DS CAT NO. 5315-001540 DC(I) NO. 27013-SA DT-14.01.17 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008 Description : SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008 C Estab
2) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER Description : SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER() Specification : SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03 C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) Steel Blank for Plunger handle carrying FOR LMG 5 56 Description : Steel Blank for Plunger handle carrying FOR LMG 5 56() Specification : STEEL BLANK FOR PLUNGER HANDLE CARRYING TO DRG.NO-SK-5273. C Estab
3) Trigger CQA (SA) SK 454/1/1 R5 Description : Trigger CQA (SA) SK 454/1/1 R5() Specification : AS PER DRG. C Estab
4) Fore Sight Drg. No. ARDE SK 3143/1 Description : Fore Sight Drg. No. ARDE SK 3143/1() Specification : AS PER DRG C Estab
5) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
7) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 R Estab
8) RIVET SNAP HEAD FOR SMALL ARMS Description : RIVET SNAP HEAD FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) Dovetail in White Finished Cond. DS CAT No-1005-007852 Description : Dovetail in White Finished Cond. DS CAT No-1005-007852() Specification : AS PER DRG. C Estab
10) Screw block rear DRG. No. SK-3143/99 Description : Screw block rear DRG. No. SK-3143/99() Specification : As per Drg. C Estab
11) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
12) LEVER PIN LOCKING IN FINISHED CONDITION Description : LEVER PIN LOCKING IN FINISHED CONDITION() Specification : LEVER PIN LOCKING TO DRG.NO. CQA(SA)SK- 588/1 DC(I) NO. 26933-SA DT- 07.09.16 IN FINISHED CONDITION. DS CAT NO 1005-560293. C Estab
13) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
14) SPACER STEPPED Description : SPACER STEPPED() Specification : AS PER DRAWING C Estab
15) PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56 Description : PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56() Specification : PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016 C Estab
16) Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 Description : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024() Specification : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 C Estab
17) PIN COCKING HANDLE FOR SMALL ARMS Description : PIN COCKING HANDLE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899 Description : LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899() Specification : LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899 C Estab
19) PLUNGER DRG NO.ARDE SK 2825/34 Description : PLUNGER DRG NO.ARDE SK 2825/34() Specification : AS PER DRG. C Estab
20) PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56 Description : PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56() Specification : PLUNGER PLATE SHOULDER REST TO DRG NO-ARDE/SK-2825/53 IN FINISHED CONDITION.DS DAT.NO.-1005-007902 DC(I) NO. 26950-SA,DTD.27.09.16 C Estab
21) Unit Auto Drg No. SK-2825/62 Description : Unit Auto Drg No. SK-2825/62() Specification : AS PER DRG. C Estab
22) Housing Drg. No. ARDE SK 2825/98 Description : Housing Drg. No. ARDE SK 2825/98() Specification : AS PER DRG C Estab
23) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56 Description : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56() Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH. C Estab
24) SCREW FRONT SLING LOOP FOR LMG 5 56 Description : SCREW FRONT SLING LOOP FOR LMG 5 56() Specification : SCREW FRONT SLING LOOP TO DRG. NO. ARDE SK- 3145/29,DS CAT NO. 5305-018855 DC(I) NO. 26950-SA, DT. 27.09.16 C Estab
25) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 Description : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
26) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
27) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
28) PIN FIXING SLEEVE FOR INSAS 5.56 MM Description : PIN FIXING SLEEVE FOR INSAS 5.56 MM() Specification : ARDE/SK 2825/9 C Estab
29) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
30) Pin straight headless for extractor to DS CAT NO 5315 009195 Description : Pin straight headless for extractor to DS CAT NO 5315 009195() Specification : PIN STRAIGHT HEADLESS FOR EXTRACTOR TO DRG. NO-ARDE/SK 2689/71. DS CAT NO-5315-009195.DC(I)NO-26930-SA DT-06.09.16 C Estab
31) RIVET SOLID PISTON EXTENSION FOR INSAS 5.56 MM Description : RIVET SOLID PISTON EXTENSION FOR INSAS 5.56 MM() Specification : ARDE SK 2689/98 C Estab
32) PLATFORM RETAINER SPRING RECOIL FOR SMALL ARMS Description : PLATFORM RETAINER SPRING RECOIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
33) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
34) Block Fixing Grip Pistol Drg.No. AKC-01 Description : Block Fixing Grip Pistol Drg.No. AKC-01() Specification : AS PER DRG. C Estab
35) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
36) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
37) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
38) BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999. Description : BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.() Specification : BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999. C Estab
39) Pin Firing DS CAT No. 1005-000831 for 9 mm Carbine Description : Pin Firing DS CAT No. 1005-000831 for 9 mm Carbine() Specification : AS PER DRG. C Estab
40) Catch butt plate DS CAT No. 5340-015391 in F/C of 9 mm Carbine Description : Catch butt plate DS CAT No. 5340-015391 in F/C of 9 mm Carbine() Specification : AS PER DRG. C Estab
41) BRACKET FOR SMALL ARMS Description : BRACKET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
42) MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000 Description : MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000() Specification : MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000 C Estab
43) PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. Description : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.() Specification : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. C Estab
44) PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. Description : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.() Specification : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. C Estab
45) SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM Description : SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : SUPPORT BARREL DS CAT NO 1005-000891 IN FINISHED CONDITION COMPLETE. SMG 9MM CARBINE 1A1. DC (I) 26898-SA,DT.20-07-2016. C Estab
46) BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016. Description : BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.() Specification : BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016. C Estab
47) STUD BAYONET FOR CARBINE 9 MM Description : STUD BAYONET FOR CARBINE 9 MM() Specification : STUD BAYONET DS CAT NO-5307-000965 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24785-SA-DT.26-07-2000. C Estab
48) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. Description : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.() Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. C Estab
49) PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94. Description : PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.() Specification : PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94. C Estab
50) Extractor as per Drg. Description : Extractor as per Drg.() Specification : AS PER DRG. C Estab
51) EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. Description : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.() Specification : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. C Estab
52) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978 Description : Plate form Assy. In Finished Cond. DS CAT No. 1005-000978() Specification : AS PER DRG. C Estab
53) ALL TYPES OF PINS FOR SMALL ARMS Description : ALL TYPES OF PINS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
54) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 Description : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003() Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 C Estab
55) SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM Description : SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION C Estab
56) CHANNEL LEFT Drg. No AKC-03/6 Description : CHANNEL LEFT Drg. No AKC-03/6() Specification : AS PER DRG C Estab
57) Channel Right Drg No. AKC-03/7BL Description : Channel Right Drg No. AKC-03/7BL() Specification : AS PER DRG. C Estab
58) PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIECE FILLER DRG NO AKC 03/8 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
59) Pin fixing barrel DRG. No. PH-1-9 Description : Pin fixing barrel DRG. No. PH-1-9() Specification : As per Drg. C Estab
60) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
61) PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008 Description : PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008() Specification : PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008 C Estab
62) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
63) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
64) SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 Description : SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08() Specification : SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 C Estab
65) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
66) SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19 C Estab
67) Plunger in Finished Condn.PH 1-24 Description : Plunger in Finished Condn.PH 1-24() Specification : As Per Drg. C Estab
68) SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER Description : SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW PLUNGER TO DRG NO.PH-1-26 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
69) SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Description : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04() Specification : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
70) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
71) SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER Description : SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER() Specification : SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09 C Estab
72) WASHER FRONT GUIDE RIGHT FOR MAG Description : WASHER FRONT GUIDE RIGHT FOR MAG() Specification : DS CAT NO 5310-011400 DC(I) NO 27105-SA DT-20/06/2017 IN FINISHED CONDITION. C Estab
73) PIVOT FEED LEVER FOR MAG Description : PIVOT FEED LEVER FOR MAG() Specification : PIVOT FEED LEVER DS CAT NO.1005-000462 DC NO. 25298-SA DTD.19.3.02 C Estab
74) SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION. Description : SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION.() Specification : SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION. C Estab
75) RIVET BOTTOM PLATE FOR MAG Description : RIVET BOTTOM PLATE FOR MAG() Specification : RIVET BOTTOM PLATE TO DS CAT NO. 5320 - 000944 PT.NO.2025Y DC(I) NO. 27014-SA DT- 16.01.17 IN FINISHED CONDITION. C Estab
76) RIVET COCKING HANDLE GUIDE FOR MAG Description : RIVET COCKING HANDLE GUIDE FOR MAG() Specification : RIVET, COCKING HANDLE GUIDE PART NO. 025T (DS CAT.NO. 5320-002938 DC(I) 27016-SA DT. 19.01.17) C Estab
77) PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG Description : PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG() Specification : PIN STRAIGHT HEADLESS (AXIS LOCKING LEVER) TO DS CAT NO. 5315-001525 DC(I) NO.27012-SB DT- 14.1.17 IN FINISHED CONDITION. C Estab
78) PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION. Description : PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION.() Specification : PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION. C Estab
79) RIVET REAR PLATE IN FINISHED CONDITION FOR MAG Description : RIVET REAR PLATE IN FINISHED CONDITION FOR MAG() Specification : RIVET,REAR PLATE TO DS CAT NO. 5320-002189 DC NO. 27016-SA DT- 19.01.2017 IN FINISHED CONDITION. C Estab
80) RIVET FRONT GUIDE SHORT FOR MAG Description : RIVET FRONT GUIDE SHORT FOR MAG() Specification : DRG.NO.SKM-876B* D.A.NO.- 81/16 C Estab
81) SCREW SIDE STOCK FOR MAG Description : SCREW SIDE STOCK FOR MAG() Specification : DS CAT NO. 5305-004284 DC NO. 27106-SA DT- 21.06.17 IN FINISHED CONDITION. C Estab
82) PIN LOCATING CATCH BUFFER BODY TO DS CAT NO. 5315-004851 DC(I) NO. 25370-SA DT- 22.5.02 IN FINISHED CONDITION. Description : PIN LOCATING CATCH BUFFER BODY TO DS CAT NO. 5315-004851 DC(I) NO. 25370-SA DT- 22.5.02 IN FINISHED CONDITION.() Specification : PIN LOCATING CATCH BUFFER BODY TO DS CAT NO. 5315-004851 DC(I) NO. 25370-SA DT- 22.5.02 IN FINISHED CONDITION. C Estab
83) SIGHT REAR FOR MAG Description : SIGHT REAR FOR MAG() Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION. C Estab
84) CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE. Description : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.() Specification : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE. C Estab
85) SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION. Description : SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION.() Specification : SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION. C Estab
86) GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./ Description : GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./() Specification : GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./ C Estab
87) Guide Upper Right Without HT MAG 7 62 mm Description : Guide Upper Right Without HT MAG 7 62 mm() Specification : GUIDE UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 27011-SA DT- 14.01.2017.IN WITHOUT HEAT TREATMENT CONDITION. C Estab
88) Plate Closing Butt Assy. Drg No. ARDE/SK-3145/26 To Consisting of Description : Plate Closing Butt Assy. Drg No. ARDE/SK-3145/26 To Consisting of() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) Steel Blank for Plunger handle carrying FOR LMG 5 56 Description : Steel Blank for Plunger handle carrying FOR LMG 5 56() Specification : STEEL BLANK FOR PLUNGER HANDLE CARRYING TO DRG.NO-SK-5273. C Estab
3) Trigger CQA (SA) SK 454/1/1 R5 Description : Trigger CQA (SA) SK 454/1/1 R5() Specification : AS PER DRG. C Estab
4) Fore Sight Drg. No. ARDE SK 3143/1 Description : Fore Sight Drg. No. ARDE SK 3143/1() Specification : AS PER DRG C Estab
5) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
7) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 R Estab
8) RIVET SNAP HEAD FOR SMALL ARMS Description : RIVET SNAP HEAD FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) Dovetail in White Finished Cond. DS CAT No-1005-007852 Description : Dovetail in White Finished Cond. DS CAT No-1005-007852() Specification : AS PER DRG. C Estab
10) Screw block rear DRG. No. SK-3143/99 Description : Screw block rear DRG. No. SK-3143/99() Specification : As per Drg. C Estab
11) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
12) LEVER PIN LOCKING IN FINISHED CONDITION Description : LEVER PIN LOCKING IN FINISHED CONDITION() Specification : LEVER PIN LOCKING TO DRG.NO. CQA(SA)SK- 588/1 DC(I) NO. 26933-SA DT- 07.09.16 IN FINISHED CONDITION. DS CAT NO 1005-560293. C Estab
13) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
14) SPACER STEPPED Description : SPACER STEPPED() Specification : AS PER DRAWING C Estab
15) PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56 Description : PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56() Specification : PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016 C Estab
16) Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 Description : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024() Specification : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 C Estab
17) PIN COCKING HANDLE FOR SMALL ARMS Description : PIN COCKING HANDLE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899 Description : LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899() Specification : LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899 C Estab
19) PLUNGER DRG NO.ARDE SK 2825/34 Description : PLUNGER DRG NO.ARDE SK 2825/34() Specification : AS PER DRG. C Estab
20) PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56 Description : PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56() Specification : PLUNGER PLATE SHOULDER REST TO DRG NO-ARDE/SK-2825/53 IN FINISHED CONDITION.DS DAT.NO.-1005-007902 DC(I) NO. 26950-SA,DTD.27.09.16 C Estab
21) Unit Auto Drg No. SK-2825/62 Description : Unit Auto Drg No. SK-2825/62() Specification : AS PER DRG. C Estab
22) Housing Drg. No. ARDE SK 2825/98 Description : Housing Drg. No. ARDE SK 2825/98() Specification : AS PER DRG C Estab
23) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56 Description : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56() Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH. C Estab
24) SCREW FRONT SLING LOOP FOR LMG 5 56 Description : SCREW FRONT SLING LOOP FOR LMG 5 56() Specification : SCREW FRONT SLING LOOP TO DRG. NO. ARDE SK- 3145/29,DS CAT NO. 5305-018855 DC(I) NO. 26950-SA, DT. 27.09.16 C Estab
25) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 Description : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
26) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
27) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
28) PIN FIXING SLEEVE FOR INSAS 5.56 MM Description : PIN FIXING SLEEVE FOR INSAS 5.56 MM() Specification : ARDE/SK 2825/9 C Estab
29) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
30) Pin straight headless for extractor to DS CAT NO 5315 009195 Description : Pin straight headless for extractor to DS CAT NO 5315 009195() Specification : PIN STRAIGHT HEADLESS FOR EXTRACTOR TO DRG. NO-ARDE/SK 2689/71. DS CAT NO-5315-009195.DC(I)NO-26930-SA DT-06.09.16 C Estab
31) RIVET SOLID PISTON EXTENSION FOR INSAS 5.56 MM Description : RIVET SOLID PISTON EXTENSION FOR INSAS 5.56 MM() Specification : ARDE SK 2689/98 C Estab
32) PLATFORM RETAINER SPRING RECOIL FOR SMALL ARMS Description : PLATFORM RETAINER SPRING RECOIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
33) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
34) Block Fixing Grip Pistol Drg.No. AKC-01 Description : Block Fixing Grip Pistol Drg.No. AKC-01() Specification : AS PER DRG. C Estab
35) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
36) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
37) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
38) BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999. Description : BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.() Specification : BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999. C Estab
39) Pin Firing DS CAT No. 1005-000831 for 9 mm Carbine Description : Pin Firing DS CAT No. 1005-000831 for 9 mm Carbine() Specification : AS PER DRG. C Estab
40) Catch butt plate DS CAT No. 5340-015391 in F/C of 9 mm Carbine Description : Catch butt plate DS CAT No. 5340-015391 in F/C of 9 mm Carbine() Specification : AS PER DRG. C Estab
41) BRACKET FOR SMALL ARMS Description : BRACKET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
42) MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000 Description : MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000() Specification : MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000 C Estab
43) PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. Description : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.() Specification : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. C Estab
44) PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. Description : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.() Specification : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. C Estab
45) SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM Description : SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : SUPPORT BARREL DS CAT NO 1005-000891 IN FINISHED CONDITION COMPLETE. SMG 9MM CARBINE 1A1. DC (I) 26898-SA,DT.20-07-2016. C Estab
46) BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016. Description : BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.() Specification : BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016. C Estab
47) STUD BAYONET FOR CARBINE 9 MM Description : STUD BAYONET FOR CARBINE 9 MM() Specification : STUD BAYONET DS CAT NO-5307-000965 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24785-SA-DT.26-07-2000. C Estab
48) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. Description : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.() Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. C Estab
49) PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94. Description : PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.() Specification : PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94. C Estab
50) Extractor as per Drg. Description : Extractor as per Drg.() Specification : AS PER DRG. C Estab
51) EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. Description : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.() Specification : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. C Estab
52) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978 Description : Plate form Assy. In Finished Cond. DS CAT No. 1005-000978() Specification : AS PER DRG. C Estab
53) ALL TYPES OF PINS FOR SMALL ARMS Description : ALL TYPES OF PINS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
54) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 Description : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003() Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 C Estab
55) SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM Description : SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION C Estab
56) CHANNEL LEFT Drg. No AKC-03/6 Description : CHANNEL LEFT Drg. No AKC-03/6() Specification : AS PER DRG C Estab
57) Channel Right Drg No. AKC-03/7BL Description : Channel Right Drg No. AKC-03/7BL() Specification : AS PER DRG. C Estab
58) PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIECE FILLER DRG NO AKC 03/8 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
59) Pin fixing barrel DRG. No. PH-1-9 Description : Pin fixing barrel DRG. No. PH-1-9() Specification : As per Drg. C Estab
60) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
61) PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008 Description : PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008() Specification : PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008 C Estab
62) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
63) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
64) SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 Description : SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08() Specification : SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 C Estab
65) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
66) SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19 C Estab
67) Plunger in Finished Condn.PH 1-24 Description : Plunger in Finished Condn.PH 1-24() Specification : As Per Drg. C Estab
68) SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER Description : SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW PLUNGER TO DRG NO.PH-1-26 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
69) SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Description : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04() Specification : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
70) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
71) SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER Description : SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER() Specification : SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09 C Estab
72) WASHER FRONT GUIDE RIGHT FOR MAG Description : WASHER FRONT GUIDE RIGHT FOR MAG() Specification : DS CAT NO 5310-011400 DC(I) NO 27105-SA DT-20/06/2017 IN FINISHED CONDITION. C Estab
73) PIVOT FEED LEVER FOR MAG Description : PIVOT FEED LEVER FOR MAG() Specification : PIVOT FEED LEVER DS CAT NO.1005-000462 DC NO. 25298-SA DTD.19.3.02 C Estab
74) SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION. Description : SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION.() Specification : SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION. C Estab
75) RIVET BOTTOM PLATE FOR MAG Description : RIVET BOTTOM PLATE FOR MAG() Specification : RIVET BOTTOM PLATE TO DS CAT NO. 5320 - 000944 PT.NO.2025Y DC(I) NO. 27014-SA DT- 16.01.17 IN FINISHED CONDITION. C Estab
76) RIVET COCKING HANDLE GUIDE FOR MAG Description : RIVET COCKING HANDLE GUIDE FOR MAG() Specification : RIVET, COCKING HANDLE GUIDE PART NO. 025T (DS CAT.NO. 5320-002938 DC(I) 27016-SA DT. 19.01.17) C Estab
77) PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG Description : PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG() Specification : PIN STRAIGHT HEADLESS (AXIS LOCKING LEVER) TO DS CAT NO. 5315-001525 DC(I) NO.27012-SB DT- 14.1.17 IN FINISHED CONDITION. C Estab
78) PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION. Description : PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION.() Specification : PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION. C Estab
79) RIVET REAR PLATE IN FINISHED CONDITION FOR MAG Description : RIVET REAR PLATE IN FINISHED CONDITION FOR MAG() Specification : RIVET,REAR PLATE TO DS CAT NO. 5320-002189 DC NO. 27016-SA DT- 19.01.2017 IN FINISHED CONDITION. C Estab
80) RIVET FRONT GUIDE SHORT FOR MAG Description : RIVET FRONT GUIDE SHORT FOR MAG() Specification : DRG.NO.SKM-876B* D.A.NO.- 81/16 C Estab
81) SCREW SIDE STOCK FOR MAG Description : SCREW SIDE STOCK FOR MAG() Specification : DS CAT NO. 5305-004284 DC NO. 27106-SA DT- 21.06.17 IN FINISHED CONDITION. C Estab
82) PIN LOCATING CATCH BUFFER BODY TO DS CAT NO. 5315-004851 DC(I) NO. 25370-SA DT- 22.5.02 IN FINISHED CONDITION. Description : PIN LOCATING CATCH BUFFER BODY TO DS CAT NO. 5315-004851 DC(I) NO. 25370-SA DT- 22.5.02 IN FINISHED CONDITION.() Specification : PIN LOCATING CATCH BUFFER BODY TO DS CAT NO. 5315-004851 DC(I) NO. 25370-SA DT- 22.5.02 IN FINISHED CONDITION. C Estab
83) SIGHT REAR FOR MAG Description : SIGHT REAR FOR MAG() Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION. C Estab
84) CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE. Description : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.() Specification : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE. C Estab
85) SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION. Description : SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION.() Specification : SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION. C Estab
86) GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./ Description : GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./() Specification : GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./ C Estab
87) Guide Upper Right Without HT MAG 7 62 mm Description : Guide Upper Right Without HT MAG 7 62 mm() Specification : GUIDE UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 27011-SA DT- 14.01.2017.IN WITHOUT HEAT TREATMENT CONDITION. C Estab
88) Plate Closing Butt Assy. Drg No. ARDE/SK-3145/26 To Consisting of Description : Plate Closing Butt Assy. Drg No. ARDE/SK-3145/26 To Consisting of() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) Steel Blank for Plunger handle carrying FOR LMG 5 56 Description : Steel Blank for Plunger handle carrying FOR LMG 5 56() Specification : STEEL BLANK FOR PLUNGER HANDLE CARRYING TO DRG.NO-SK-5273. C Estab
3) Trigger CQA (SA) SK 454/1/1 R5 Description : Trigger CQA (SA) SK 454/1/1 R5() Specification : AS PER DRG. C Estab
4) Fore Sight Drg. No. ARDE SK 3143/1 Description : Fore Sight Drg. No. ARDE SK 3143/1() Specification : AS PER DRG C Estab
5) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
7) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 R Estab
8) RIVET SNAP HEAD FOR SMALL ARMS Description : RIVET SNAP HEAD FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) Dovetail in White Finished Cond. DS CAT No-1005-007852 Description : Dovetail in White Finished Cond. DS CAT No-1005-007852() Specification : AS PER DRG. C Estab
10) Screw block rear DRG. No. SK-3143/99 Description : Screw block rear DRG. No. SK-3143/99() Specification : As per Drg. C Estab
11) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
12) LEVER PIN LOCKING IN FINISHED CONDITION Description : LEVER PIN LOCKING IN FINISHED CONDITION() Specification : LEVER PIN LOCKING TO DRG.NO. CQA(SA)SK- 588/1 DC(I) NO. 26933-SA DT- 07.09.16 IN FINISHED CONDITION. DS CAT NO 1005-560293. C Estab
13) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
14) SPACER STEPPED Description : SPACER STEPPED() Specification : AS PER DRAWING C Estab
15) PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56 Description : PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56() Specification : PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016 C Estab
16) Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 Description : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024() Specification : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 C Estab
17) PIN COCKING HANDLE FOR SMALL ARMS Description : PIN COCKING HANDLE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
18) LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899 Description : LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899() Specification : LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899 C Estab
19) PLUNGER DRG NO.ARDE SK 2825/34 Description : PLUNGER DRG NO.ARDE SK 2825/34() Specification : AS PER DRG. C Estab
20) PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56 Description : PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56() Specification : PLUNGER PLATE SHOULDER REST TO DRG NO-ARDE/SK-2825/53 IN FINISHED CONDITION.DS DAT.NO.-1005-007902 DC(I) NO. 26950-SA,DTD.27.09.16 C Estab
21) Unit Auto Drg No. SK-2825/62 Description : Unit Auto Drg No. SK-2825/62() Specification : AS PER DRG. C Estab
22) Housing Drg. No. ARDE SK 2825/98 Description : Housing Drg. No. ARDE SK 2825/98() Specification : AS PER DRG C Estab
23) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56 Description : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56() Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH. C Estab
24) SCREW FRONT SLING LOOP FOR LMG 5 56 Description : SCREW FRONT SLING LOOP FOR LMG 5 56() Specification : SCREW FRONT SLING LOOP TO DRG. NO. ARDE SK- 3145/29,DS CAT NO. 5305-018855 DC(I) NO. 26950-SA, DT. 27.09.16 C Estab
25) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 Description : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
26) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
27) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
28) PIN FIXING SLEEVE FOR INSAS 5.56 MM Description : PIN FIXING SLEEVE FOR INSAS 5.56 MM() Specification : ARDE/SK 2825/9 C Estab
29) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
30) Pin straight headless for extractor to DS CAT NO 5315 009195 Description : Pin straight headless for extractor to DS CAT NO 5315 009195() Specification : PIN STRAIGHT HEADLESS FOR EXTRACTOR TO DRG. NO-ARDE/SK 2689/71. DS CAT NO-5315-009195.DC(I)NO-26930-SA DT-06.09.16 C Estab
31) RIVET SOLID PISTON EXTENSION FOR INSAS 5.56 MM Description : RIVET SOLID PISTON EXTENSION FOR INSAS 5.56 MM() Specification : ARDE SK 2689/98 C Estab
32) PLATFORM RETAINER SPRING RECOIL FOR SMALL ARMS Description : PLATFORM RETAINER SPRING RECOIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
33) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
34) Block Fixing Grip Pistol Drg.No. AKC-01 Description : Block Fixing Grip Pistol Drg.No. AKC-01() Specification : AS PER DRG. C Estab
35) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
36) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
37) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
38) BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999. Description : BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.() Specification : BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999. C Estab
39) Pin Firing DS CAT No. 1005-000831 for 9 mm Carbine Description : Pin Firing DS CAT No. 1005-000831 for 9 mm Carbine() Specification : AS PER DRG. C Estab
40) Catch butt plate DS CAT No. 5340-015391 in F/C of 9 mm Carbine Description : Catch butt plate DS CAT No. 5340-015391 in F/C of 9 mm Carbine() Specification : AS PER DRG. C Estab
41) BRACKET FOR SMALL ARMS Description : BRACKET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
42) MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000 Description : MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000() Specification : MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000 C Estab
43) PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. Description : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.() Specification : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. C Estab
44) PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. Description : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.() Specification : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. C Estab
45) SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM Description : SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : SUPPORT BARREL DS CAT NO 1005-000891 IN FINISHED CONDITION COMPLETE. SMG 9MM CARBINE 1A1. DC (I) 26898-SA,DT.20-07-2016. C Estab
46) BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016. Description : BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.() Specification : BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016. C Estab
47) STUD BAYONET FOR CARBINE 9 MM Description : STUD BAYONET FOR CARBINE 9 MM() Specification : STUD BAYONET DS CAT NO-5307-000965 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24785-SA-DT.26-07-2000. C Estab
48) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. Description : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.() Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. C Estab
49) PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94. Description : PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.() Specification : PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94. C Estab
50) Extractor as per Drg. Description : Extractor as per Drg.() Specification : AS PER DRG. C Estab
51) EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. Description : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.() Specification : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. C Estab
52) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978 Description : Plate form Assy. In Finished Cond. DS CAT No. 1005-000978() Specification : AS PER DRG. C Estab
53) ALL TYPES OF PINS FOR SMALL ARMS Description : ALL TYPES OF PINS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
54) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 Description : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003() Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 C Estab
55) SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM Description : SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION C Estab
56) CHANNEL LEFT Drg. No AKC-03/6 Description : CHANNEL LEFT Drg. No AKC-03/6() Specification : AS PER DRG C Estab
57) Channel Right Drg No. AKC-03/7BL Description : Channel Right Drg No. AKC-03/7BL() Specification : AS PER DRG. C Estab
58) PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIECE FILLER DRG NO AKC 03/8 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
59) Pin fixing barrel DRG. No. PH-1-9 Description : Pin fixing barrel DRG. No. PH-1-9() Specification : As per Drg. C Estab
60) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
61) PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008 Description : PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008() Specification : PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008 C Estab
62) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
63) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
64) SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 Description : SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08() Specification : SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 C Estab
65) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
66) SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19 C Estab
67) Plunger in Finished Condn.PH 1-24 Description : Plunger in Finished Condn.PH 1-24() Specification : As Per Drg. C Estab
68) SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER Description : SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW PLUNGER TO DRG NO.PH-1-26 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
69) SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Description : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04() Specification : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
70) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
71) SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER Description : SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER() Specification : SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09 C Estab
72) WASHER FRONT GUIDE RIGHT FOR MAG Description : WASHER FRONT GUIDE RIGHT FOR MAG() Specification : DS CAT NO 5310-011400 DC(I) NO 27105-SA DT-20/06/2017 IN FINISHED CONDITION. C Estab
73) PIVOT FEED LEVER FOR MAG Description : PIVOT FEED LEVER FOR MAG() Specification : PIVOT FEED LEVER DS CAT NO.1005-000462 DC NO. 25298-SA DTD.19.3.02 C Estab
74) SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION. Description : SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION.() Specification : SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION. C Estab
75) RIVET BOTTOM PLATE FOR MAG Description : RIVET BOTTOM PLATE FOR MAG() Specification : RIVET BOTTOM PLATE TO DS CAT NO. 5320 - 000944 PT.NO.2025Y DC(I) NO. 27014-SA DT- 16.01.17 IN FINISHED CONDITION. C Estab
76) RIVET COCKING HANDLE GUIDE FOR MAG Description : RIVET COCKING HANDLE GUIDE FOR MAG() Specification : RIVET, COCKING HANDLE GUIDE PART NO. 025T (DS CAT.NO. 5320-002938 DC(I) 27016-SA DT. 19.01.17) C Estab
77) PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG Description : PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG() Specification : PIN STRAIGHT HEADLESS (AXIS LOCKING LEVER) TO DS CAT NO. 5315-001525 DC(I) NO.27012-SB DT- 14.1.17 IN FINISHED CONDITION. C Estab
78) PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION. Description : PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION.() Specification : PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION. C Estab
79) RIVET REAR PLATE IN FINISHED CONDITION FOR MAG Description : RIVET REAR PLATE IN FINISHED CONDITION FOR MAG() Specification : RIVET,REAR PLATE TO DS CAT NO. 5320-002189 DC NO. 27016-SA DT- 19.01.2017 IN FINISHED CONDITION. C Estab
80) RIVET FRONT GUIDE SHORT FOR MAG Description : RIVET FRONT GUIDE SHORT FOR MAG() Specification : DRG.NO.SKM-876B* D.A.NO.- 81/16 C Estab
81) SCREW SIDE STOCK FOR MAG Description : SCREW SIDE STOCK FOR MAG() Specification : DS CAT NO. 5305-004284 DC NO. 27106-SA DT- 21.06.17 IN FINISHED CONDITION. C Estab
82) PIN LOCATING CATCH BUFFER BODY TO DS CAT NO. 5315-004851 DC(I) NO. 25370-SA DT- 22.5.02 IN FINISHED CONDITION. Description : PIN LOCATING CATCH BUFFER BODY TO DS CAT NO. 5315-004851 DC(I) NO. 25370-SA DT- 22.5.02 IN FINISHED CONDITION.() Specification : PIN LOCATING CATCH BUFFER BODY TO DS CAT NO. 5315-004851 DC(I) NO. 25370-SA DT- 22.5.02 IN FINISHED CONDITION. C Estab
83) SIGHT REAR FOR MAG Description : SIGHT REAR FOR MAG() Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION. C Estab
84) CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE. Description : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.() Specification : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE. C Estab
85) SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION. Description : SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION.() Specification : SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION. C Estab
86) GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./ Description : GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./() Specification : GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./ C Estab
87) Guide Upper Right Without HT MAG 7 62 mm Description : Guide Upper Right Without HT MAG 7 62 mm() Specification : GUIDE UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 27011-SA DT- 14.01.2017.IN WITHOUT HEAT TREATMENT CONDITION. C Estab
88) Plate Closing Butt Assy. Drg No. ARDE/SK-3145/26 To Consisting of Description : Plate Closing Butt Assy. Drg No. ARDE/SK-3145/26 To Consisting of() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008 Description : SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008 C Estab
2) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
3) PIN SEAR TRIPPER FOR MAG Description : PIN SEAR TRIPPER FOR MAG() Specification : DS CAT NO. 5315-001540 DC(I) NO. 27013-SA DT-14.01.17 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
3563 Nidhi Enterprises
C-block vikas nagar meerut road street no. 3 Ghaziabad Uttar Pradesh
PIN1 : 201003
Phone No. : 2870140 		AMUPK6726D

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) DISC TO CQA AMMN DRG NO QX 336 DC 35434 A DT 30 12 92 Description : DISC TO CQA AMMN DRG NO QX 336 DC 35434 A DT 30 12 92() Specification : DISC TO CQA(AMMN) DRG.NO. QX-336, DC-35434-A DT. 30.12.92 C Estab
Category : ddp
Grade : 3
Size : S
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SEMI MACHINED UNION RING US 939211001 Description : SEMI MACHINED UNION RING US 939211001() Specification : SEMI MACHINED UNION RING TO DRG NO. US-939211001 R Estab
Category : p
Grade : 3
Size : S
3564 PLT INDUSTRIES PVT LTD
"E-355, INDUSTRIAL AREA BHIWADI ALWAR RAJASTHAN
PIN1 : 301019
Phone No. : 9352107507 		301019P001

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) steel ball LF 9911356820 Description : steel ball LF 9911356820() Specification : steel ball to drg no. NAI(j) R Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL BALL 3.5-200 (IS-4398 (FUZE 30MM) (9911350208) Description : STEEL BALL 3.5-200 (IS-4398 (FUZE 30MM) (9911350208)() Specification : STEEL BALL __3.5-200, TO MATERIAL SPECN:-IS-4398:1994 (2nd REVISION) GRADE 104 Cr6 REAFFIRMED DEC-98 AMDT NO.1 JULY 1999TO DRG NO.CQA(A)/Amn./2970 DC 37271-A DT 08/11/2010. C Estab
Category : p
Grade : 3
Size : S
3565 PERFORMANCE PRODUCTS AND SERVICES
2 116 BYE PASS ROAD SENEERKUPPAM VILLAGE POONAMALLEE TAMIL NADU
PIN1 : 600056
Phone No. : 044 26494495 		CHEP07792B

Download 		1Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) CASTROL Description : CASTROL() Specification : CASTROL MAKE PRODUCTS P Estab
Category : s
Grade : 2
Size : S
3566 GEETA TRADING COMPANY
SHAKTI TIRAHA,JAY PRAKASH NAGAR,ADHARTAL, JABALPUR MADHYA PRADESH
PIN1 : 482004
Phone No. : 07612743368 		482004G123

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SLOTTED CHEESE HEADSCREW M 2.5*5 (9911357866) Description : SLOTTED CHEESE HEADSCREW M 2.5*5 (9911357866)() Specification : SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265. C Estab
Category : p
Grade : 3
Size : S
3567 ASHOK ENTERPRISES
9, INDUSTRIAL ESTATE ADHARTAL JABALPUR MADHYA PRADESH
PIN1 : 482004
Phone No. : 07612743368 		00000TR957

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ASSY AND PAINTING OF CRATE 12A AS ENCL LF 0000000731 Description : ASSY AND PAINTING OF CRATE 12A AS ENCL LF 0000000731() Specification : ASSY AND PAINTING OF CRATE 12A AS ENCL P Estab
2) MFG PAINTING OF 125 IMI PLWOOD BOX LF 0000000745 Description : MFG PAINTING OF 125 IMI PLWOOD BOX LF 0000000745() Specification : MANUFACTURING AND PAINTING OF 125 FSAPDS.IMI PLYWOOD BOX AS PER TERMS AND CONDITIONS ENCLOSED. R Estab
3) ASSY PAINTING OF CRATE 13 A LF 0000000940 Description : ASSY PAINTING OF CRATE 13 A LF 0000000940() Specification : ASSEMBLY AND PAINTING OF CRATE 13A (WOODEN) . THA DETAILED SCOPE OF WORK IS AS PER ANNEX.'A'. R Estab
4) CRATE 12A WOODEN ISV-483A (HEAT/TPT (6574370000) Description : CRATE 12A WOODEN ISV-483A (HEAT/TPT (6574370000)() Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM C Estab
Category : p
Grade : 3
Size : S
3568 ASHOK TIMBER INDUSTRIES
E-22, INDUSTRIAL AREA YAMUNANAGAR HARYANA
PIN1 : 135001
Phone No. : 07612743368 		135001A269

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PLYWOOD BWR 12-13MM X7PLYX1.2X1.2M (2270415254) Description : PLYWOOD BWR 12-13MM X7PLYX1.2X1.2M (2270415254)() Specification : PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992. R Estab
2) BOX M-369 WOODEN IA-880 ISV-165A (6570521000) Description : BOX M-369 WOODEN IA-880 ISV-165A (6570521000)() Specification : BOX M-369 MK1/L/(WOOD) TO DRG. PT. NO. ISV-165-A DC-34541-A DT 28-1-89 SPECN:-IA 948 (ak) DC-36868-A AIDEMEMOIRE-W/4. R Estab
3) TIMBER M/H/C/CHIK/CHIR 19X75X1.25M (2255548309) Description : TIMBER M/H/C/CHIK/CHIR 19X75X1.25M (2255548309)() Specification : TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG. R Estab
Category : p
Grade : 3
Size : S
3569 GRS ENGINEERING PVT LTD
PRABHU NIVAS, 2664/1A,D-52/A FIRST FLOOR 3RD MAIN ROAD,VV MOHALLA MYSORE TAMILNADU
PIN1 : 570002
Phone No. : 07612743368 		570002G821

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600) Description : SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)() Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L). C Estab
Category : p
Grade : 3
Size : S
3570 Sonia Forging (p) Ltd. Alwar
Plot No. A-1164 Phase IV Riico ind. Area Bhiwadi Alwar Alwar RJ
PIN1 : 301019
Phone No. : 01493221572
GSTIN : 08AACCS5819E1ZD 		JPRS03973E

Download 		1Grey Iron Foundry

[ENR Registration]
Name Specification Use Status
1) SUSPENSION LUG. SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1 Description : SUSPENSION LUG. SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1() Specification : SUSPENSION LUG. SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1 C Estab
Category : p
Grade : 3
Size : S
3571 MEDEQUIP SERVICES
KK HOUSE PLOT NO. B-35 INDUSTRIAL ESTATE SANATHNAGAR HYDERABAD ANDHRA PRADESH
PIN1 : 500018
Phone No. : 07612743368 		500018M001

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PIEZO ELECTRIC GENERATOR ASSY. (9911357853) Description : PIEZO ELECTRIC GENERATOR ASSY. (9911357853)() Specification : PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203. C Estab
Category : p
Grade : 3
Size : S
3572 MULTIMETALS LIMITED
"PLOT NO. 6 & 7, HEAVEY INDUSTRAREA, KANSUA ROAD KOTA RAJASTHAN
PIN1 : 324003
Phone No. : 07612743368 		0000TR4004

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 48X1.1MM BS2870 CZ108 (0710890346) Description : BRASS STRIP 48X1.1MM BS2870 CZ108 (0710890346)() Specification : BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120 R Estab
Category : p
Grade : 3
Size : S
3573 REFORM TOOLS PVT. LTD.
225-D, A.J.C. BOSE ROAD KOLKATA WEST BENGAL
PIN1 : 700020
Phone No. : 07612743368 		700020R001

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SUPPORTING RING TO DRG.NO.TRD222272 (9911357861) Description : SUPPORTING RING TO DRG.NO.TRD222272 (9911357861)() Specification : SUPPORTING RING TO DRG.NO.TRD-2-2-2272. C Estab
Category : p
Grade : 3
Size : S
3574 DECORATIVE PRODUCTS
103 N SHIVSHAKTI IND.ESTATE ABOVE SARASWAT CO OP BANK L.B.S.MARG GHATKOPER MUMBAI MAHARASHTRA
PIN1 : 400086
Phone No. : 9819601710 		ASCPS9194H

Download 		1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 2526001850 STICK ON EXPLOSIVE LABEL FOR POD Description : 2526001850 STICK ON EXPLOSIVE LABEL FOR POD() Specification : STICK-ON EXPLOSIVE LABEL TO ARDE DRAWING NO.8603 00 51 00 00 002 OODA FOR POD (FILLED) UNHD 1.1 E. R Estab
2) 2526001851 STICK ON EXPLOSIVE LABEL FOR FUZE Description : 2526001851 STICK ON EXPLOSIVE LABEL FOR FUZE() Specification : STICK- ON EXPLOSIVE LABEL TO ARDE DRAWING NO.8603 02 04 0000 002 00DA FOR FUZE & ACCESSORIES PACKING BOX UNHD 1.1 B. R Estab
3) 2556000990 LABEL SK 1473 Description : 2556000990 LABEL SK 1473() Specification : STICKER LABEL DRG. NO. SK- 1473 DT. 15/10/84. R Estab
4) 2556001858 LABEL STICKER FOR FUZE B429E FILLED Description : 2556001858 LABEL STICKER FOR FUZE B429E FILLED() Specification : CQA(A) 2201,FOR FIXING ON CONTAINER 38 B,FOR PACKING FUZE B 429E. R Estab
5) 2590000040 LABEL IA 983 Description : 2590000040 LABEL IA 983() Specification : SPECN. NO. IS: 13262-1992 (R.A.1997) R Estab
6) 2590000041 LABEL SK 1457 Description : 2590000041 LABEL SK 1457() Specification : LABEL STICKER COLOUR: OLIVE GREEN OR BLACK R Estab
Category : p
Grade : 3
Size : S
3575 DIEFRAME TOOLROOM ENGINEERING
T/204, D-8, PAVANA INDL.PREMISES M.I.D.C., BHOSARI, PUNE MAHARASHTRA
PIN1 : 411026
Phone No. : 9822004443
GSTIN : 27ABNPL4452H1ZF 		ABNPL4452H

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) CATCH COCKING HANDLE (MOULDING) FOR SMALL ARMS Description : CATCH COCKING HANDLE (MOULDING) FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
2) SILENCER JVPC 5.56MM DRG.NO-0204-04-01-00-00-000-00DA Description : SILENCER JVPC 5.56MM DRG.NO-0204-04-01-00-00-000-00DA() Specification : SILENCER JVPC 5.56MM DRG.NO-0204-04-01-00-00-000-00DA C Estab
3) SHOOTING REST FOR JVPC TO DRG. NO. 0204-03-02-00-00-000-00AA Description : SHOOTING REST FOR JVPC TO DRG. NO. 0204-03-02-00-00-000-00AA() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) INVESTMENT CASTING OF SLIDE COCKING HANDLE TO DRG.NO. SK-3706/16*2 Description : INVESTMENT CASTING OF SLIDE COCKING HANDLE TO DRG.NO. SK-3706/16*2() Specification : AS PER DRG. C Estab
2) Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle Description : Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle() Specification : Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle C Estab
Category : p
Grade : 3
Size : S
3576 Chatterji Moulders
129/A J.K.Paul Road Kolkata Kolkata WB
PIN1 : 700038
Phone No. : 09831115516 		CALC12947E

Download 		1Grey Iron Foundry

[ENR Registration]
Name Specification Use Status
1) GASKET NEOPRENE RUBBER OD 91 5 MM Description : GASKET NEOPRENE RUBBER OD 91 5 MM() Specification : GASKET NEOPRENCE RUBBER, OD-91.5 MM X ID-79.5 MM X 3MM THICK IND/ME/ 884 (PROV) CLASS C-50 TO DRG. NO.AAIW/BS-0079 C Estab
2) GASKET NEOPRENE RUBBER OD 43 MM Description : GASKET NEOPRENE RUBBER OD 43 MM() Specification : GASKET NEOPRENE RUBBER, OD-43 X ID 35 MM X 1 MM THICK IND/ME/ 884 (PROV) CLASS C50 TO DRG. NO.AAIW/BS-0076 C Estab
3) NEOPRENE WASHER OD 48 X ID 33 MM Description : NEOPRENE WASHER OD 48 X ID 33 MM() Specification : NEOPRENCE WASHER AS PER IND/ME/884 (PROV) CLASS C50 TO DRG.NO.AAIW/BS-0115(FORBASEPLUG TO DRG.NO. BS- 0113) C Estab
4) Neoprene Washer OD 40 Description : Neoprene Washer OD 40() Specification : Neoprene Washer OD 40 C Estab
Category : p
Grade : 3
Size : S
3577 ROSELL CORPORATE
W-77, M.I.D.C. HINGNA NAGPUR MAHARASHTRA
PIN1 : 440028
Phone No. : 07612743368 		0000TR8060

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BITUMEN SPECIAL AMMN LF 1020051203 Description : BITUMEN SPECIAL AMMN LF 1020051203() Specification : BITUMEN SPECIAL AMMUNITION IND/ME/136(b) DC NO.3500-ME DT.09/04/98.SOFTENING POINT OF BITUMEN SHOULD BE BETWEEN 84 DEGREE CENTIGRADE TO 90 DEGREE CENTIGRADE. R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BITUMEN SPECIAL AMMN LF 1020051203 Description : BITUMEN SPECIAL AMMN LF 1020051203() Specification : BITUMEN SPECIAL AMMUNITION IND/ME/136(b) DC NO.3500-ME DT.09/04/98.SOFTENING POINT OF BITUMEN SHOULD BE BETWEEN 84 DEGREE CENTIGRADE TO 90 DEGREE CENTIGRADE. R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BITUMEN SPECIAL AMMN LF 1020051203 Description : BITUMEN SPECIAL AMMN LF 1020051203() Specification : BITUMEN SPECIAL AMMUNITION IND/ME/136(b) DC NO.3500-ME DT.09/04/98.SOFTENING POINT OF BITUMEN SHOULD BE BETWEEN 84 DEGREE CENTIGRADE TO 90 DEGREE CENTIGRADE. R Estab
Category : p
Grade : 3
Size : S
3578 S.P. INDUSTRIES
2149/16 NEW KANCHANPUR INDUSTRIAL AREA ADHARTAL JABALPUR MADHYA PRADESH
PIN1 : 482004
Phone No. : 07612743368 		0000TR1777

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CENTRAL TUBE WELDED FOR BOMB 250KG LF 9911358115 Description : CENTRAL TUBE WELDED FOR BOMB 250KG LF 9911358115() Specification : CENTRAL TUBE ASSEMBLY WELDING TO DRG NO.TRD-2-1-2296. C Estab
Category : p
Grade : 3
Size : S
3579 SAI KRUPA ELECTRICALS
1/2,GAUTAMI MATA NAGAR CO-OP. HSG.SOC.LTD.B.G.KHER ROAD WORLI MUMBAI MAHARASHTRA
PIN1 : 400018
Phone No. : 07612743368 		2008000133

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) COPPER STRIP 40 0 62 MM ANNEALED LF 0707491176 Description : COPPER STRIP 40 0 62 MM ANNEALED LF 0707491176() Specification : COPPER STRIP 40MM X 0.62MM THICK TO SPECIFICATION IS:1972, GRADE: ETP ANNEALED CONDITION. REQUIRED FOR MANUFACTURING OF CASE PP-3 COMPONENT. R Estab
Category : p
Grade : 3
Size : S
3580 INDUSTRIAL TRADING CORPORATION
33/1 N.S Road Marshall House R. No. 520 KOLKATA WEST BENGAL
PIN1 : 700001
Phone No. : CAL103410B 		CAL103410B

Download 		1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET() Specification : AS PER SPECIFICATION C Estab
2) STEEL ROUND & STRIP Description : STEEL ROUND & STRIP() Specification : AS PER SPECIFICATION C Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET() Specification : AS PER SPECIFICATION C Estab
2) STEEL ROUND & STRIP Description : STEEL ROUND & STRIP() Specification : AS PER SPECIFICATION C Estab
Category : dp
Grade : 3
Size : S

Copyright © 2025 - OFB